This patch adds the MOVE_MOUNT_BENEATH constant from Linux 6.5 to
glibc's sys/mount.h and updates tst-mount-consts.py to reflect these
constants being up to date with that Linux kernel version.
Tested with build-many-glibcs.py.
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.4 adds new constants PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG
and PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG. Add those to all
relevant sys/ptrace.h headers, along with adding the associated
argument structure to bits/ptrace-shared.h (named struct
__ptrace_sud_config there following the usual convention for such
structures).
Tested for x86_64 and with build-many-glibcs.py.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This definition is only used as a fallback with old kernel headers.
The change follows kernel commit bfdf4e6208051ed7165b2e92035b4bf11
("rseq: Remove broken uapi field layout on 32-bit little endian").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The rseq area is placed directly into struct pthread. rseq
registration failure is not treated as an error, so it is possible
that threads run with inconsistent registration status.
<sys/rseq.h> is not yet installed as a public header.
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 5.13 adds a PTRACE_GET_RSEQ_CONFIGURATION constant, with an
associated ptrace_rseq_configuration structure.
Add this constant to the various sys/ptrace.h headers in glibc, with
the structure in bits/ptrace-shared.h (named struct
__ptrace_rseq_configuration in glibc, as with other such structures).
Tested for x86_64, and with build-many-glibcs.py.
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
Fixes commit 8a40aff86b ("io: Add time64 alias
for fcntl"), commit 82c395d91e ("misc: Add
time64 alias for ioctl"), commit b39ffab860
("Linux: Add time64 alias for prctl").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The value of PR_TAGGED_ADDR_ENABLE was incorrect in the installed
headers and the prctl command macros were missing that are needed
for it to be useful (PR_SET_TAGGED_ADDR_CTRL). Linux headers have
the definitions since 5.4 so it's widely available, we don't need
to repeat these definitions. The remaining definitions are from
Linux 5.10.
To build glibc with --enable-memory-tagging, Linux 5.4 headers and
binutils 2.33.1 or newer is needed.
Reviewed-by: DJ Delorie <dj@redhat.com>
After this patch applied the ntp_gettimex function is always declared
in the sys/timex.h header. Currently it is not when __REDIRECT_NTH is
defined (i.e. in ARM 32 bit port).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Older versions of the Linux kernel headers obviously lack support for
memory tagging, but we still want to be able to build in support when
using those (obviously it can't be enabled on such systems).
The linux kernel extensions are made to the platform-independent
header (linux/prctl.h), so this patch takes a similar approach.
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use <arch-syscall.h> instead of <asm/unistd.h> to obtain the system
call numbers. A few direct includes of <asm/unistd.h> need to be
removed (if the system call numbers are already provided indirectly
by <sysdep.h>) or replaced with <sys/syscall.h>.
Current Linux headers for alpha define the required system call names,
so most of the _NR_* hacks are no longer needed. For the 32-bit arm
architecture, eliminate the INTERNAL_SYSCALL_ARM macro, now that we
have regular system call names for cacheflush and set_tls. There are
more such cleanup opportunities for other architectures, but these
cleanups are required to avoid macro redefinition errors during the
build.
For ia64, it is desirable to use <asm/break.h> directly to obtain
the break number for system calls (which is not a system call number
itself). This requires replacing __BREAK_SYSCALL with
__IA64_BREAK_SYSCALL because the former is defined as an alias in
<asm/unistd.h>, but not in <asm/break.h>.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 5.3 adds a PTRACE_GET_SYSCALL_INFO constant, with an associated
structure and PTRACE_SYSCALL_INFO_* constants.
This patch adds these to sys/ptrace.h in glibc
(PTRACE_GET_SYSCALL_INFO in each architecture version, the rest in
bits/ptrace-shared.h). As with previous such constants and associated
structures, the glibc version of the structure is named struct
__ptrace_syscall_info.
Tested for x86_64, and with build-many-glibcs.py.
With only two exceptions (sys/types.h and sys/param.h, both of which
historically might have defined BYTE_ORDER) the public headers that
include <endian.h> only want to be able to test __BYTE_ORDER against
__*_ENDIAN.
This patch creates a new bits/endian.h that can be included by any
header that wants to be able to test __BYTE_ORDER and/or
__FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs
__LONG_LONG_PAIR. It only defines macros in the implementation
namespace.
The existing bits/endian.h (which could not be included independently
of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER)
is renamed to bits/endianness.h. I also took the opportunity to
canonicalize the form of this header, which we are stuck with having
one copy of per architecture. Since they are so short, this means git
doesn’t understand that they were renamed from existing headers, sigh.
endian.h itself is a nonstandard header and its only remaining use
from a standard header is guarded by __USE_MISC, so I dropped the
__USE_MISC conditionals from around all of the public-namespace things
it defines. (This means, an application that requests strict library
conformance but includes endian.h will still see the definition of
BYTE_ORDER.)
A few changes to specific bits/endian(ness).h variants deserve
mention:
- sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to
sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did
have selectable endianness, but we have assembly code in
sysdeps/ia64 that assumes it’s little-endian, so there is no reason
to treat the ia64 endianness.h as linux-specific.
- The C-SKY port does not fully support big-endian mode, the compile
will error out if __CSKYBE__ is defined.
- The PowerPC port had extra logic in its bits/endian.h to detect a
broken compiler, which strikes me as unnecessary, so I removed it.
- The only files that defined __FLOAT_WORD_ORDER always defined it to
the same value as __BYTE_ORDER, so I removed those definitions.
The SH bits/endian(ness).h had comments inconsistent with the
actual setting of __FLOAT_WORD_ORDER, which I also removed.
- I *removed* copyright boilerplate from the few bits/endian(ness).h
headers that had it; these files record a single fact in a fashion
dictated by an external spec, so I do not think they are copyrightable.
As long as I was changing every copy of ieee754.h in the tree, I
noticed that only the MIPS variant includes float.h, because it uses
LDBL_MANT_DIG to decide among three different versions of
ieee854_long_double. This patch makes it not include float.h when
GCC’s intrinsic __LDBL_MANT_DIG__ is available.
* string/endian.h: Unconditionally define LITTLE_ENDIAN,
BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping
macros only on !__ASSEMBLER__. Move the definitions of
__BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER,
and __LONG_LONG_PAIR to...
* string/bits/endian.h: ...this new file, which includes
the renamed header bits/endianness.h for the definition of
__BYTE_ORDER and possibly __FLOAT_WORD_ORDER.
* string/Makefile: Install bits/endianness.h.
* include/bits/endian.h: New wrapper.
* bits/endian.h: Rename to bits/endianness.h.
Add multiple-include guard. Rewrite the comment explaining what
the machine-specific variants of this file should do.
* sysdeps/unix/sysv/linux/ia64/bits/endian.h:
Move to sysdeps/ia64.
* sysdeps/aarch64/bits/endian.h
* sysdeps/alpha/bits/endian.h
* sysdeps/arm/bits/endian.h
* sysdeps/csky/bits/endian.h
* sysdeps/hppa/bits/endian.h
* sysdeps/ia64/bits/endian.h
* sysdeps/m68k/bits/endian.h
* sysdeps/microblaze/bits/endian.h
* sysdeps/mips/bits/endian.h
* sysdeps/nios2/bits/endian.h
* sysdeps/powerpc/bits/endian.h
* sysdeps/riscv/bits/endian.h
* sysdeps/s390/bits/endian.h
* sysdeps/sh/bits/endian.h
* sysdeps/sparc/bits/endian.h
* sysdeps/x86/bits/endian.h:
Rename to endianness.h; canonicalize form of file; remove
redundant definitions of __FLOAT_WORD_ORDER.
* sysdeps/powerpc/bits/endianness.h: Remove logic to check for
broken compilers.
* ctype/ctype.h
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h
* sysdeps/ia64/ieee754.h
* sysdeps/ieee754/ieee754.h
* sysdeps/ieee754/ldbl-128/ieee754.h
* sysdeps/ieee754/ldbl-128ibm/ieee754.h
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
* sysdeps/mips/ieee754/ieee754.h
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
* sysdeps/nptl/pthread.h
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
* sysdeps/sparc/sparc32/ieee754.h
* sysdeps/unix/sysv/linux/generic/bits/stat.h
* sysdeps/unix/sysv/linux/generic/bits/statfs.h
* sysdeps/unix/sysv/linux/sys/acct.h
* wctype/bits/wctype-wchar.h:
Include bits/endian.h, not endian.h.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h.
* sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__
in ifdefs, instead of LDBL_MANT_DIG. Only include float.h
when __LDBL_MANT_DIG__ is not predefined, in which case
define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
Now that there are no internal users of __sysctl left, it is possible
to add an unconditional deprecation warning to <sys/sysctl.h>.
To avoid a test failure due this warning in check-install-headers,
skip the test for sys/sysctl.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the IN_MASK_CREATE macro from Linux 4.19 to
sys/inotify.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/sys/inotify.h (IN_MASK_CREATE): New
macro.
This patch completes the process of unifying sys/procfs.h headers for
architectures using the Linux kernel by making alpha use the generic
version.
That was previously deferred because alpha has different definitions
of prgregset_t and prfpregset_t from other architectures, so changing
to the common definitions would change C++ name mangling. To avoid
such a change, a header bits/procfs-prregset.h is added, and alpha
gets its own version of that header.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/sys/procfs.h: Include
<bits/procfs-prregset.h>.
(prgregset_t): Define using __prgregset_t.
(prfpregset_t): Define using __prfpregset_t.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/procfs-prregset.h.
* sysdeps/unix/sysv/linux/bits/procfs-prregset.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/procfs-prregset.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h: Remove file.
This patch continues the process of unifying sys/procfs.h headers for
architectures using the Linux kernel.
A bits/procfs-id.h header is added to define __pr_uid_t and __pr_gid_t
for the types of pr_uid and pr_gid; the default version of this header
uses unsigned int. On some architectures, sys/procfs.h has copies of
32-bit structures for 64-bit builds; those move into a
bits/procfs-extra.h header (they can't go in bits/procfs.h because
they have to come *after* other declarations from sys/procfs.h).
Given appropriate versions of these headers, six more architectures
can then move to providing only bits/procfs*.h without duplicating the
rest of the contents of sys/procfs.h. Only alpha needs a further
bits/ header to be added before it can stop having its own
sys/procfs.h.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/sys/procfs.h: Include
<bits/procfs-id.h> and <bits/procfs-extra.h>.
(struct elf_prpsinfo): Use __pr_uid_t and __pr_gid_t as types of
pr_uid and pr_gid.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/procfs-id.h and bits/procfs-extra.h.
* sysdeps/unix/sysv/linux/bits/procfs-extra.h: New file.
* sysdeps/unix/sysv/linux/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/arm/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/arm/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs-extra.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sh/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/sh/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs-extra.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sys/procfs.h: Remove file.
* sysdeps/unix/sysv/linux/m68k/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/x86/sys/procfs.h: Likewise.
