These symbols are internal and never exported; make sure the compiler
realizes that when compiling hurdsig.c and does not try to emit GOT
reads.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
For i686, this change is no op but for x86_64 it forces all inlined port
rights to be 8 bytes long.
Message-ID: <20231124213041.952886-2-flaviocruz@gmail.com>
Existing MiG does not support untyped messages and the Hurd will
continue to use typed messages for the foreseeable future.
Message-ID: <ZVmYX6j4pYNUfqn4@jupiter.tail36e24.ts.net>
The `ty` pointer is only set at the end of the loop so that
`msgtl_header.msgt_inline` and `msgtl_header.msgt_deallocate` remain
valid. Also, when deallocating memory, we use the length from the
message directly rather than hard coding mach_port_t since we want to
deallocate any kind of OOL data.
Message-ID: <ZVlGVD6eEN-dXsOr@jupiter.tail36e24.ts.net>
When the given options do not include MACH_SEND_INTERRUPT,
_hurd_intr_rpc_mach_msg (aka mach_msg) is not supposed to return
MACH_SEND_INTERRUPTED. In such a case we thus have to retry sending the
message.
This was observed to fix various occurrences of spurious
"(ipc/send) interrupted" errors when running haskell programs.
This fixes a hurd/check-installed-headers-c failure with
-std=c89 #define _FORTIFY_SOURCE 1:
In file included from ../hurd/hurd.h:354,
from ../sysdeps/hurd/include/hurd.h:2,
from /tmp/cih_test_9IaUwa.c:10:
/home/bmg/install/compilers/i686-gnu/lib/gcc/i686-glibc-gnu/13.2.1/include/stdarg.h:54:34: error: "__STDC_VERSION__" is not defined, evaluates to 0 [-Werror=undef]
54 | #if !defined(__STRICT_ANSI__) || __STDC_VERSION__ + 0 >= 199900L \
| ^~~~~~~~~~~~~~~~
/home/bmg/install/compilers/i686-gnu/lib/gcc/i686-glibc-gnu/13.2.1/include/stdarg.h:55:8: error: "__cplusplus" is not defined, evaluates to 0 [-Werror=undef]
55 | || __cplusplus + 0 >= 201103L
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
We need to include hurd.h for libc_hidden_proto (__hurd_thread_self),
introduced in b44c1e1252 ("hurd: Fix using interposable
hurd_thread_self")
This the error log:
In file included from <command-line>:
./../include/libc-symbols.h:472:33: error: '__EI___hurd_thread_self' aliased to undefined symbol '__GI___hurd_thread_self'
472 | extern thread __typeof (name) __EI_##name \
| ^~~~~
./../include/libc-symbols.h:468:3: note: in expansion of macro '__hidden_ver2'
468 | __hidden_ver2 (, local, internal, name)
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:476:41: note: in expansion of macro '__hidden_ver1'
476 | # define hidden_def(name) __hidden_ver1(__GI_##name, name, name);
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:557:32: note: in expansion of macro 'hidden_def'
557 | # define libc_hidden_def(name) hidden_def (name)
| ^~~~~~~~~~
thread-self.c:27:1: note: in expansion of macro 'libc_hidden_def'
27 | libc_hidden_def (__hurd_thread_self)
| ^~~~~~~~~~~~~~~
Message-Id: <ZGr6wj2UOxg3F0qH@jupiter.tail36e24.ts.net>
The __hurd_fail () inline function is the dedicated, idiomatic way of
reporting errors in the Hurd part of glibc. Not only is it more concise
than '{ errno = err; return -1; }', it is since commit
6639cc1002
"hurd: Mark error functions as __COLD" marked with the cold attribute,
telling the compiler that this codepath is unlikely to be executed.
In one case, use __hurd_dfail () over the plain __hurd_fail ().
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-1-bugaevc@gmail.com>
Create a private hidden __hurd_thread_self alias, and use that one.
Fixes 2f8ecb58a5
"hurd: Fix x86_64 _hurd_tls_fork" and
c7fcce38c8
"hurd: Make sure to not use tcb->self"
Reported-by: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
...instead of mach_setup_thread (), which is unsuitable for setting up
function calls.
Checked on x86_64-gnu: the signal thread no longer crashes upon trying
to process a message.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-6-bugaevc@gmail.com>
Summary of changes:
- Use BAD_TYPECHECK to perform type checking in a cleaner way.
BAD_TYPECHECK is moved into sysdeps/mach/rpc.h to avoid duplication.
- Remove assertions for mach_msg_type_t since those won't work for
x86_64.
- Update message structs to use mach_msg_type_t directly.
- Use designated initializers.
Message-Id: <ZFa+roan3ioo0ONM@jupiter.tail36e24.ts.net>
Summary of the changes:
- Introduce BAD_TYPECHECK from MiG to make it simpler to do type
checking.
- Replace int type with mach_msg_type_t. This assumes that
mach_msg_type_t is always the same size as int which is not true for
x86_64.
- Calculate the size and align using PTR_ALIGN_UP, which is a bit
cleaner and similar to what we do elsewhere.
- Define mach_msg_type_t to check using designated initializers.
Message-Id: <ZFMvrIkvoCSxqB/C@jupiter.tail36e24.ts.net>
If we're trying to interrupt an interruptible RPC, but the server fails
to respond to our __interrupt_operation () call, we instead destroy the
reply port we were expecting the reply to the RPC on.
Instead of deallocating the name completely, replace it with a dead
name, so the name won't get reused for some other right, and deallocate
it in _hurd_intr_rpc_mach_msg once we return from the signal handler.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429201822.2605207-4-bugaevc@gmail.com>
This should hopefully hint the compiler that they are unlikely
to be called.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131223.2507236-2-bugaevc@gmail.com>
We need to set file_name, not update retryname. This is what the other
branches do.
Before this change, any attempt to access such a file would segfault due
to file_name being unset:
$ settrans -ac /tmp/my-machtype /hurd/magic machtype
$ cat /tmp/my-machtype
Segmentation fault
Checked on i686-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131354.2507443-7-bugaevc@gmail.com>
If the process has set the close-on-exec flag for the file descriptor,
it expects the file descriptor to get closed on exec, even if we replace
what the file descriptor refers to.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131354.2507443-6-bugaevc@gmail.com>
Each libc_hidden_def should be placed immediately next to its function,
not in some random unrelated place.
No functional change.
Fixes: 653d74f12a
"hurd: Global signal disposition"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131354.2507443-2-bugaevc@gmail.com>
This block of code was doing exactly what _hurd_self_sigstate does; so
just call that and let it do its job.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131354.2507443-1-bugaevc@gmail.com>
_hurd_thread_sigstate () already handles finding an existing sigstate
before allocating a new one, so just use that. Bonus: this will only
lock the _hurd_siglock once.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Much as the comment says, things on _hurd_subinit assume that _hurd_pid
is already initialized by the time _hurd_subinit is run, so
_hurd_proc_subinit has to run before it. Specifically, init_dtable ()
calls _hurd_port2fd (), which uses _hurd_pid and _hurd_pgrp to set up
ctty handling. With _hurd_subinit running before _hurd_proc_subinit,
ctty setup was broken:
13<--33(pid1255)->term_getctty () = 0 4<--39(pid1255)
task16(pid1255)->mach_port_deallocate (pn{ 10}) = 0
13<--33(pid1255)->term_open_ctty (0 0) = 0x40000016 (Invalid argument)
Fix this by running the _hurd_proc_subinit hook in the correct place --
just after _hurd_portarray is set up (so the proc server port is
available in its usual place) and just before running _hurd_subinit.
Fixes 1ccbb9258e
("hurd: Notify the proc server later during initialization").
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
It is common to have (some of) stdin, stdout and stderr point to the
very same port. We were making the ctty RPCs that _hurd_port2fd () does
for each one of them separately:
1. term_getctty ()
2. mach_port_deallocate ()
3. term_open_ctty ()
Instead, let's detect this case and duplicate the ctty port we already
have. This means we do 1 RPC instead of 3 (and create a single protid
on the server side) if the file is our ctty, and no RPCs instead of 1
if it's not. A clear win!
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Now that the signal code no longer accesses it, the only real user of it
was mig-reply.c, so move the logic for managing the port there.
If we're in SHARED and outside of rtld, we know that __LIBC_NO_TLS ()
always evaluates to 0, and a TLS reply port will always be used, not
__hurd_reply_port0. Still, the compiler does not see that
__hurd_reply_port0 is never used due to its address being taken. To deal
with this, explicitly compile out __hurd_reply_port0 when we know we
won't use it.
Also, instead of accessing the port via THREAD_SELF->reply_port, this
uses THREAD_GETMEM and THREAD_SETMEM directly, avoiding possible
miscompilations.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
If we're doing signals, that means we've already got the signal thread
running, and that implies TLS having been set up. So we know that
__hurd_local_reply_port will resolve to THREAD_SELF->reply_port, and can
access that directly using the THREAD_GETMEM and THREAD_SETMEM macros.
This avoids potential miscompilations, and should also be a tiny bit
faster.
Also, use mach_port_mod_refs () and not mach_port_destroy () to destroy
the receive right. mach_port_destroy () should *never* be used on
mach_task_self (); this can easily lead to port use-after-free
vulnerabilities if the task has any other references to the same port.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-26-bugaevc@gmail.com>
These are just regular local variables that are not accessed in any
funny ways, not even though a pointer. There's absolutely no reason to
declare them volatile. It only ends up hurting the quality of the
generated machine code.
If anything, it would make sense to decalre sigsp as *pointing* to
volatile memory (volatile void *sigsp), but evidently that's not needed
either.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230403115621.258636-2-bugaevc@gmail.com>
When THREAD_GETMEM is defined with inline assembly, the compiler may not
optimize away the two reads of _hurd_sigstate. Help it out a little bit
by only reading it once. This also makes for a slightly cleaner code.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-32-bugaevc@gmail.com>
hurd/lookup-retry.c is compiled into rtld, the dynamic linker/loader. To
avoid pulling in file_set_size, file_utimens, tty/ctty stuff, more
string/memory code (memmove, strncpy, strcpy), and more strtoul/itoa
code, compile out support for O_TRUNC and FS_RETRY_MAGICAL when building
hurd/lookup-retry.c for rtld. None of that functionality is useful to
rtld during startup anyway. Keep support for FS_RETRY_MAGICAL("/"),
since that does not pull in much, and is required for following absolute
symlinks.
The large number of extra code being pulled into rtld was noticed by
reviewing librtld.map & elf/librtld.os.map in the build tree.
It is worth noting that once libc.so is loaded, the real __open, __stat,
etc. replace the minimal versions used initially by rtld -- this is
especially important in the Hurd port, where the minimal rtld versions
do not use the dtable and just pass real Mach port names as fds. Thus,
once libc.so is loaded, rtld will gain access to the full
__hurd_file_name_lookup_retry () version, complete with FS_RETRY_MAGICAL
support, which is important in case the program decides to
dlopen ("/proc/self/fd/...") or some such.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-9-bugaevc@gmail.com>
...to keep `sigexc' port initialization in one place, and match what the
comments say.
No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-7-bugaevc@gmail.com>
Noone is or should be using __hurd_threadvar_stack_{offset,mask}, we
have proper TLS now. These two remaining variables are never set to
anything other than zero, so any code that would try to use them as
described would just dereference a zero pointer and crash. So remove
them entirely.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-6-bugaevc@gmail.com>
On EXC_BAD_ACCESS, exception subcode is used to pass the faulting memory
address, so it needs to be (at least) pointer-sized. Thus, make it into
a long. This matches the corresponding change in GNU Mach.
Message-Id: <20230319151017.531737-5-bugaevc@gmail.com>
The hooks mechanism uses symbol sets for running lists of functions,
which requires either extra linker directives to provide any hardening
(such as RELRO) or additional code (such as pointer obfuscation via
mangling with random value).
Currently only hurd uses set-hooks.h so we remove it from the generic
includes. The generic implementation uses direct function calls which
provide hardening and good code generation, observability and debugging
without the need for extra linking options or special code handling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Also, fix a couple of typos. No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230301162355.426887-2-bugaevc@gmail.com>
"We don't need it any more"
The INTR_MSG_TRAP macro in intr-msg.h used to play little trick with
the stack pointer: it would temporarily save the "real" stack pointer
into ecx, while setting esp to point to just before the message buffer,
and then invoke the mach_msg trap. This way, INTR_MSG_TRAP reused the
on-stack arguments laid out for the containing call of
_hurd_intr_rpc_mach_msg (), passing them to the mach_msg trap directly.
This, however, required special support in hurdsig.c and trampoline.c,
since they now had to recognize when a thread is inside the piece of
code where esp doesn't point to the real tip of the stack, and handle
this situation specially.
Commit 1d20f33ff4 has removed the actual
temporary change of esp by actually re-pushing mach_msg arguments onto
the stack, and popping them back at end. It did not, however, deal with
the rest of "the ecx kludge" code in other files, resulting in potential
crashes if a signal arrives in the middle of pushing arguments onto the
stack.
Fix that by removing "the ecx kludge". Instead, when we want a thread
to skip the RPC, but cannot make just make it jump to after the trap
since it's not done adjusting the stack yet, set the SYSRETURN register
to MACH_SEND_INTERRUPTED (as we do anyway), and rely on the thread
itself for detecting this case and skipping the RPC.
This simplifies things somewhat and paves the way for a future x86_64
port of this code.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230301162355.426887-1-bugaevc@gmail.com>
Fix a few more cases of build errors caused by mismatched types. This is a
continuation of f4315054b4.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-3-bugaevc@gmail.com>
