This synchronization method has a lower overhead and makes
it more likely that the signal arrives during one of the critical
functions.
Also test for fork deadlocks explicitly.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The memusagestat is the only binary that has its own link line which
causes it to be linked against the existing installed C library. It
has been this way since it was originally committed in 1999, but I
don't see any reason as to why. Since we want all the programs we
build locally to be against the new copy of glibc, change the build
to be like all other programs.
This one tests for BZ#23907 where the double free
test didn't check the tcache bin bounds before dereferencing
the bin.
[BZ #23907]
* malloc/tst-tcfree3.c: New.
* malloc/Makefile: Add it.
malloc_stats means to disable cancellation for writes to stderr while
it runs, but it restores stderr->_flags2 with |= instead of =, so what
it actually does is disable cancellation on stderr permanently.
[BZ #22830]
* malloc/malloc.c (__malloc_stats): Restore stderr->_flags2
correctly.
* malloc/tst-malloc-stats-cancellation.c: New test case.
* malloc/Makefile: Add new test case.
When posix_memalign is called with an alignment less than MALLOC_ALIGNMENT
and a requested size close to SIZE_MAX, it falls back to malloc code
(because the alignment of a block returned by malloc is sufficient to
satisfy the call). In this case, an integer overflow in _int_malloc leads
to posix_memalign incorrectly returning successfully.
Upon fixing this and writing a somewhat thorough regression test, it was
discovered that when posix_memalign is called with an alignment larger than
MALLOC_ALIGNMENT (so it uses _int_memalign instead) and a requested size
close to SIZE_MAX, a different integer overflow in _int_memalign leads to
posix_memalign incorrectly returning successfully.
Both integer overflows affect other memory allocation functions that use
_int_malloc (one affected malloc in x86) or _int_memalign as well.
This commit fixes both integer overflows. In addition to this, it adds a
regression test to guard against false successful allocations by the
following memory allocation functions when called with too-large allocation
sizes and, where relevant, various valid alignments:
malloc, realloc, calloc, reallocarray, memalign, posix_memalign,
aligned_alloc, valloc, and pvalloc.
The malloc tcache added in 2.26 will leak all of the elements remaining
in the cache and the cache structure itself when a thread exits. The
defect is that we do not set tcache_shutting_down early enough, and the
thread simply recreates the tcache and places the elements back onto a
new tcache which is subsequently lost as the thread exits (unfreed
memory). The fix is relatively simple, move the setting of
tcache_shutting_down earlier in tcache_thread_freeres. We add a test
case which uses mallinfo and some heuristics to look for unaccounted for
memory usage between the start and end of a thread start/join loop. It
is very reliable at detecting that there is a leak given the number of
iterations. Without the fix the test will consume 122MiB of leaked
memory.
This commit adds fixed-size allocation buffers. The primary use
case is in NSS modules, where dynamically sized data is stored
in a fixed-size buffer provided by the caller.
Other uses include a replacement of mempcpy cascades (which is
safer due to the size checking inherent to allocation buffers).
This is intended as a type-safe alternative to obstacks and
hand-written realloc constructs. The implementation avoids
writing function pointers to the heap.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files. extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module. Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.
* extra-modules.mk: Delete file.
* cppflags-iterator.mk: Rename to ...
* libof-iterator.mk: ...this. Adjust comments.
* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
Use libof-iterator.mk instead of cppflags-iterator.mk or
extra-modules.mk.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
Read tunables values from the users using the GLIBC_TUNABLES
environment variable. The value of this variable is a colon-separated
list of name=value pairs. So a typical string would look like this:
GLIBC_TUNABLES=glibc.malloc.mmap_threshold=2048:glibc.malloc.trim_threshold=1024
* config.make.in (have-loop-to-function): Define.
* elf/Makefile (CFLAGS-dl-tunables.c): Add
-fno-tree-loop-distribute-patterns.
* elf/dl-tunables.c: Include libc-internals.h.
(GLIBC_TUNABLES): New macro.
(tunables_strdup): New function.
(parse_tunables): New function.
(min_strlen): New function.
(__tunables_init): Use the new functions and macro.
(disable_tunable): Disable tunable from GLIBC_TUNABLES.
* malloc/tst-malloc-usable-tunables.c: New test case.
* malloc/tst-malloc-usable-static-tunables.c: New test case.
* malloc/Makefile (tests, tests-static): Add tests.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
After the removal of __malloc_initialize_hook, newly compiled
Emacs binaries are no longer able to use these interfaces.
malloc_get_state is only used during the Emacs build process,
so we provide a stub implementation only. Existing Emacs binaries
will not call this stub function, but still reference the symbol.
The rewritten tst-mallocstate test constructs a dumped heap
which should approximates what existing Emacs binaries pass
to glibc malloc.
This is a trivial change to add the static tests only to tests-static
and then adding all of tests-static to the tests target to make it
look consistent with some other Makefiles. This avoids having to
duplicate the test names across the two make targets.
* malloc/Makefile (tests): Remove individual static test names
and just add all of tests-static.
Existing interposed mallocs do not define the glibc-internal
fork callbacks (and they should not), so statically interposed
mallocs lead to link failures because the strong reference from
fork pulls in glibc's malloc, resulting in multiple definitions
of malloc-related symbols.
__malloc_initialize_hook is interposed by application code, so
the usual approach to define a compatibility symbol does not work.
This commit adds a new mechanism based on #pragma GCC poison in
<stdc-predef.h>.
This provides a band-aid and addresses the scenario where fork is
called from a signal handler while the process is in the malloc
subsystem (or has acquired the libio list lock). It does not
address the general issue of async-signal-safety of fork;
multi-threaded processes are not covered, and some glibc
subsystems have fork handlers which are not async-signal-safe.
Previously, a thread M invoking fork would acquire locks in this order:
(M1) malloc arena locks (in the registered fork handler)
(M2) libio list lock
A thread F invoking flush (NULL) would acquire locks in this order:
(F1) libio list lock
(F2) individual _IO_FILE locks
A thread G running getdelim would use this order:
(G1) _IO_FILE lock
(G2) malloc arena lock
After executing (M1), (F1), (G1), none of the threads can make progress.
This commit changes the fork lock order to:
(M'1) libio list lock
(M'2) malloc arena locks
It explicitly encodes the lock order in the implementations of fork,
and does not rely on the registration order, thus avoiding the deadlock.
* malloc/Makefile ($(objpfx)tst-malloc-backtrace,
$(objpfx)tst-malloc-thread-exit, $(objpfx)tst-malloc-thread-fail): Use
$(shared-thread-library) instead of hardcoding the path to libpthread.
This test case exercises unusual code paths in allocation functions,
related to allocation failures. Specifically, the test can reveal
the following bugs:
(a) calloc returns non-zero memory on fallback to sysmalloc.
(b) calloc can self-deadlock because it fails to release
the arena lock on certain allocation failures.
(c) pvalloc can dereference a NULL arena pointer.
(a) and (b) appear specific to a faulty downstream backport.
(c) was fixed as part of commit 10ad46bc65.
The test for (a) was inspired by a reproducer supplied by Jeff Layton.
reused_arena can increase the attached thread count of arenas on the
free list. This means that the assertion that the reference count is
zero is incorrect. In this case, the reference count initialization
is incorrect as well and could cause arenas to be put on the free
list too early (while they still have attached threads).
* malloc/arena.c (get_free_list): Remove assert and adjust
reference count handling. Add comment about reused_arena
interaction.
(reused_arena): Add comments abount get_free_list interaction.
* malloc/tst-malloc-thread-exit.c: New file.
* malloc/Makefile (tests): Add tst-malloc-thread-exit.
(tst-malloc-thread-exit): Link against libpthread.
When the malloc subsystem detects some kind of memory corruption,
depending on the configuration it prints the error, a backtrace, a
memory map and then aborts the process. In this process, the
backtrace() call may result in a call to malloc, resulting in
various kinds of problematic behavior.
In one case, the malloc it calls may detect a corruption and call
backtrace again, and a stack overflow may result due to the infinite
recursion. In another case, the malloc it calls may deadlock on an
arena lock with the malloc (or free, realloc, etc.) that detected the
corruption. In yet another case, if the program is linked with
pthreads, backtrace may do a pthread_once initialization, which
deadlocks on itself.
In all these cases, the program exit is not as intended. This is
avoidable by marking the arena that malloc detected a corruption on,
as unusable. The following patch does that. Features of this patch
are as follows:
- A flag is added to the mstate struct of the arena to indicate if the
arena is corrupt.
- The flag is checked whenever malloc functions try to get a lock on
an arena. If the arena is unusable, a NULL is returned, causing the
malloc to use mmap or try the next arena.
- malloc_printerr sets the corrupt flag on the arena when it detects a
corruption
- free does not concern itself with the flag at all. It is not
important since the backtrace workflow does not need free. A free
in a parallel thread may cause another corruption, but that's not
new
- The flag check and set are not atomic and may race. This is fine
since we don't care about contention during the flag check. We want
to make sure that the malloc call in the backtrace does not trip on
itself and all that action happens in the same thread and not across
threads.
I verified that the test case does not show any regressions due to
this patch. I also ran the malloc benchmarks and found an
insignificant difference in timings (< 2%).
* malloc/Makefile (tests): New test case tst-malloc-backtrace.
* malloc/arena.c (arena_lock): Check if arena is corrupt.
(reused_arena): Find a non-corrupt arena.
(heap_trim): Pass arena to unlink.
* malloc/hooks.c (malloc_check_get_size): Pass arena to
malloc_printerr.
(top_check): Likewise.
(free_check): Likewise.
(realloc_check): Likewise.
* malloc/malloc.c (malloc_printerr): Add arena argument.
(unlink): Likewise.
(munmap_chunk): Adjust.
(ARENA_CORRUPTION_BIT): New macro.
(arena_is_corrupt): Likewise.
(set_arena_corrupt): Likewise.
(sysmalloc): Use mmap if there are no usable arenas.
(_int_malloc): Likewise.
(__libc_malloc): Don't fail if arena_get returns NULL.
(_mid_memalign): Likewise.
(__libc_calloc): Likewise.
(__libc_realloc): Adjust for additional argument to
malloc_printerr.
(_int_free): Likewise.
(malloc_consolidate): Likewise.
(_int_realloc): Likewise.
(_int_memalign): Don't touch corrupt arenas.
* malloc/tst-malloc-backtrace.c: New test case.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current tests don't test the functionality of realloc in detail.
Add a new test for realloc that exercises some of the corner cases
that are not otherwise tested.
ChangeLog:
2013-09-09 Will Newton <will.newton@linaro.org>
* malloc/Makefile: Add tst-realloc to tests.
* malloc/tst-realloc.c: New file.
[BZ #1349]
malloc_usable_size returns the usable size in an allocated chunk,
which may be >= the requested size. In the case of MALLOC_CHECK_ being
exported to > 0 however, only the requested size is usable, since a
magic value is written at the end of the request size to trap writes
beyond request bounds. Hence, when MALLOC_CHECK_ is exported to > 0,
malloc_usable_size() should return the request size.
obstack calls several callbacks, so on i?86 it'd better be compiled
without -mpreferred-stack-boundary=2, otherwise the callbacks are called
with misaligned stack.
(public_sET_STATe): If ms->version < 3, put all chunks into
unsorted chunks and clear {fd,bk}_nextsize fields of largebin
chunks.
* malloc/malloc.c [MALLOC_DEBUG]: Revert 2007-05-13 changes.
* malloc/hooks.c: Likewise.
* malloc/arena.c: Likewise.
* malloc/malloc.c (do_check_malloc_state): Don't assert
n_mmaps is not greater than n_mmaps_max. This removes the need
for the previous change.
* malloc/Makefile (CFLAGS-malloc.c): Revert accidental
2007-05-07 commit.
(new_heap): Initialize mprotect_size.
(grow_heap): When growing, only mprotect from mprotect_size till
new_size if mprotect_size is smaller. When shrinking, use PROT_NONE
MMAP for __libc_enable_secure only, otherwise use MADV_DONTNEED.
2007-05-07 Ulrich Drepper <drepper@redhat.com>
Jakub Jelinek <jakub@redhat.com>
* malloc/arena.c (heap_info): Add mprotect_size field, adjust pad.
(new_heap): Initialize mprotect_size.
(grow_heap): When growing, only mprotect from mprotect_size till
new_size if mprotect_size is smaller. When shrinking, use PROT_NONE
MMAP for __libc_enable_secure only, otherwise use MADV_DONTNEED.
* malloc/arena.c (ptmalloc_lock_all): If global lock already taken
by the same thread, just bump the counter.
(ptmalloc_unlock_all): If counter for recursive locks hasn't reached
zero, don't do anything else.
* malloc/Makefile (tests): Add tst-mallocfork.
* malloc/tst-mallocfork.c: New file.
2005-08-17 Robert Love <rml@novell.com>
* sysdeps/unix/sysv/linux/sys/inotify.h: Add IN_MOVE_SELF event.
2005-08-19 Bruno Haible <bruno@clisp.org>
* intl/localealias.c (read_alias_file): In case of failure, close the
file descriptor and sort the array before returning.
2005-08-19 Ulrich Drepper <drepper@redhat.com>
* malloc/Makefile: Link libmemusage.so with ld.so.
* malloc/memusage.c: Use atomic operations for all counter and size
computations. Handle thread stacks.
* sysdeps/generic/memusage.h: Define memusage_cntr_t and
memusage_size_t.
* sysdeps/i386/i686/memusage.h: New file.
* include/atomic.h: Define atomic_max and atomic_min.
* debug/tst-chk1.c: Add tests for mbstowcs and wcstombs.
(_dl_close): If called recursively, just remember GC needs to be rerun
and decrease l_direct_opencount. Avoid GC if l_direct_opencount
decreased to 1. Rerun GC at the end if any destructor unloaded some
additional libraries.
* elf/Makefile: Add rules to build and run unload6 test.
* elf/unload6.c: New test.
* elf/unload6mod1.c: New file.
* elf/unload6mod2.c: New file.
* elf/unload6mod3.c: New file.
* malloc/hooks.c (mem2chunk_check): Add magic_p argument, set *magic_p
if magic_p is not NULL.
(top_check): Invoke MALLOC_FAILURE_ACTION if MORECORE failed.
(malloc_check): Fail if sz == -1.
(free_check): Adjust mem2chunk_check caller.
(realloc_check): Likewise. Fail if bytes == -1. If bytes == 0 and
oldmem != NULL, call free_check and return NULL. If reallocating
and returning NULL, invert magic byte again to make oldmem valid
region for further checking.
(memalign_check): Fail if bytes == -1.
* malloc/Makefile: Add rules to build and run tst-mcheck.
* malloc/tst-mcheck.c: New test.
2003-09-27 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Include <malloc-machine.h> earlier instead of
"thread-m.h", so that default parameters can be overridden in a
system-specific malloc-machine.h. Remove extra ; from extern "C"
closing brace.
* sysdeps/generic/malloc-machine.h: New file.
* sysdeps/mach/hurd/malloc-machine.h: New file.
* malloc/thread-m.h: Removed.
* malloc/Makefile: Remove CFLAGS-malloc.c parameter addition, it
is in sysdeps/generic/malloc-machine.h now.
* elf/dl-reloc.c (_dl_allocate_static_tls): Move definition of
variables only used if TLS_TCB_AT_TP is defined into the #if
branch.
* sysdeps/unix/sysv/linux/Makefile: Remove db2 directory handling.
* malloc/Makefile (CFLAGS-malloc.c): Define DEFAULT_TOP_PAD to 128k.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-malloc.c): Add to, not
replace.
* malloc/thread-freeres.c: New file.
* malloc/Makefile (aux): Add it.
* sunrpc/Versions (GLIBC_PRIVATE): Removed.
* sunrpc/rpc_thread.c (__rpc_thread_destroy): Put in special section
"__libc_thread_freeres_fn" and add to __libc_thread_subfreeres set.
* sysdeps/unix/sysv/linux/i386/geteuid.c (__geteuid): Typo fix.
* sysdeps/unix/sysv/linux/i386/getgid.c (__getgid): Typo fix.
2003-02-21 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/opendir.c (__opendir): Use O_NONBLOCK in open.
* iconvdata/Makefile (tests): Add bug-iconv3 only if
[$(have-thread-library) = yes].
file-specific variable override so it compiles properly when using
--with-headers.
* NEWS: Added item for powerpc64-linux port.
* include/libc-symbols.h [HAVE_ASM_GLOBAL_DOT_NAME]
(C_SYMBOL_DOT_NAME): Insure that C_SYMBOL_DOT_NAME works for
various gcc versions. Dot names required for powerpc64.
[HAVE_ASM_GLOBAL_DOT_NAME] (_weak_extern): Add .weakext '.'ed symbol.
[HAVE_ASM_GLOBAL_DOT_NAME] (strong_alias): Add .global
C_SYMBOL_DOT_NAME(alias).
[HAVE_ASM_GLOBAL_DOT_NAME] (strong_data_alias): New macro. Same as
original strong_alias macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (weak_alias): Add .weakext/.weak
C_SYMBOL_DOT_NAME(alias).
[HAVE_ASM_GLOBAL_DOT_NAME] (_symbol_version): Add .symver '.'ed name.
[HAVE_ASM_GLOBAL_DOT_NAME] (_default_symbol_version): Add .symver
'.'ed name.
Add comments on libc_hidden_data_def and libc_hidden_data_weak usage.
[HAVE_ASM_GLOBAL_DOT_NAME] (hidden_dot_def1): New macro. Generate
.global C_SYMBOL_DOT_NAME(alias). Otherwise an empty macro.
(hidden_def): Append hidden_dot_def1 macro to definition.
(hidden_ver): Append hidden_dot_def1 macro to definition.
(hidden_data_def): New macro. Same as original hidden_def macro.
(hidden_data_ver): New macro. Same as original hidden_ver macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (hidden_dot_weak1): New macro. Generate
.weakext C_SYMBOL_DOT_NAME(alias). Otherwise an empty macro.
(hidden_weak): Append hidden_dot_weak1 macro to definition.
(hidden_data_weak): New macro. Same as original hidden_weak macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (HIDDEN_JUMPTARGET): Define as .__GI_name.
Otherwise defined as __GI_name.
(libc_hidden_data_def): New macro. Use hidden_data_def.
(libc_hidden_data_weak): New macro. Use hidden_data_weak.
(libc_hidden_data_ver): New macro. Use hidden_data_ver.
(rtld_hidden_data_def): New macro. Use hidden_data_def.
(rtld_hidden_data_weak): New macro. Use hidden_data_weak.
(rtld_hidden_data_ver): New macro. Use hidden_data_ver.
(libm_hidden_data_def): New macro. Use hidden_data_def.
(libm_hidden_data_weak): New macro. Use hidden_data_weak.
(libm_hidden_data_ver): New macro. Use hidden_data_ver.
* inet/in6_addr.c: Replace libc_hidden_def with libc_hidden_data_def.
2002-01-18 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Rewrite, adapted from Doug Lea's malloc-2.7.0.c.
* malloc/malloc.h: Likewise.
* malloc/arena.c: New file.
* malloc/hooks.c: New file.
* malloc/tst-mallocstate.c: New file.
* malloc/Makefile: Add new testcase tst-mallocstate.
Add arena.c and hooks.c to distribute. Fix commented CPPFLAGS.
2002-01-28 Ulrich Drepper <drepper@redhat.com>
* stdlib/msort.c: Remove last patch. The optimization violates the
same rule which qsort.c had problems with.
2002-01-27 Paul Eggert <eggert@twinsun.com>
* stdlib/qsort.c (_quicksort): Do not apply the comparison function
to a pivot element that lies outside the array to be sorted, as
ISO C99 requires that the comparison function be called only with
addresses of array elements [PR libc/2880].
2001-08-29 Ulrich Drepper <drepper@redhat.com>
* nis/nis_findserv.c (__nis_findfastest): Don't fail if reply received
first is from a previous call.
Patch by Alexander Belopolsky <alexb@rentec.com> for [PR libc/3670].
2001-08-29 Andreas Schwab <schwab@suse.de>
* sysdeps/ia64/fpu/libm-test-ulps: Updated.
2001-08-25 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
* config.make.in (INSTALL_SCRIPT): Define.
* Makeconfig (INSTALL_SCRIPT): Define.
* Makerules (do-install-script): New macro to install scripts using
INSTALL_SCRIPT.
(install-bin-script): New rule to install scripts with
do-install-script.
(install-bin-script-nosubdir): New rule.
(install-no-libc.a-nosubdir): Add install-bin-script-nosubdir.
(distinfo-vars): Add $(install-bin-script).
* Rules (others): Likewise.
* Makefile (glibcbug): Install with install-bin-script.
* debug/Makefile (xtrace): Likewise.
(catchsegv): Likewise.
* elf/Makefile (ldd): Likewise.
* malloc/Makefile (mtrace): Likewise.
* timezone/Makefile (tzselect): Likewise.
2001-08-29 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/dl-machine.h (__dl_runtime_resolve): Pass
ELF_RTYPE_CLASS_PLT, instead of R_MIPS_REL32, to
_dl_lookup_versioned_symbol () and _dl_lookup_symbol ().
Add it to LDFLAGS.so, LDFLAGS-rtld, and +link.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/cris/Dist: New file.
* sysdeps/unix/sysv/linux/cris/Makefile: New file.
* sysdeps/unix/sysv/linux/cris/_G_config.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/fcntl.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/mman.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/resource.h: New file.
* sysdeps/unix/sysv/linux/cris/brk.c: New file.
* sysdeps/unix/sysv/linux/cris/chown.c: New file.
* sysdeps/unix/sysv/linux/cris/clone.S: New file.
* sysdeps/unix/sysv/linux/cris/fchown.c: New file.
* sysdeps/unix/sysv/linux/cris/fcntl.c: New file.
* sysdeps/unix/sysv/linux/cris/fxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/getegid.c: New file.
* sysdeps/unix/sysv/linux/cris/geteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/getresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit64.c: New file.
* sysdeps/unix/sysv/linux/cris/getuid.c: New file.
* sysdeps/unix/sysv/linux/cris/lchown.c: New file.
* sysdeps/unix/sysv/linux/cris/lockf64.c: New file.
* sysdeps/unix/sysv/linux/cris/lxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/mmap.S: New file.
* sysdeps/unix/sysv/linux/cris/mmap64.S: New file.
* sysdeps/unix/sysv/linux/cris/msgctl.c: New file.
* sysdeps/unix/sysv/linux/cris/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/cris/register-dump.h: New file.
* sysdeps/unix/sysv/linux/cris/semctl.c: New file.
* sysdeps/unix/sysv/linux/cris/setegid.c: New file.
* sysdeps/unix/sysv/linux/cris/seteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/setregid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setreuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/setuid.c: New file.
* sysdeps/unix/sysv/linux/cris/shmctl.c: New file.
* sysdeps/unix/sysv/linux/cris/socket.S: New file.
* sysdeps/unix/sysv/linux/cris/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/cris/syscall.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.h: New file.
* sysdeps/unix/sysv/linux/cris/vfork.S: New file.
* sysdeps/unix/sysv/linux/cris/xstat.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/cris/Dist: New file.
* sysdeps/cris/Implies: New file.
* sysdeps/cris/Makefile: New file.
* sysdeps/cris/__longjmp.S: New file.
* sysdeps/cris/_mcount.S: New file.
* sysdeps/cris/bits/endian.h: New file.
* sysdeps/cris/bits/setjmp.h: New file.
* sysdeps/cris/bits/string.h: New file.
* sysdeps/cris/dl-machine.h: New file.
* sysdeps/cris/elf/start.S: New file.
* sysdeps/cris/machine-gmon.h: New file.
* sysdeps/cris/memcopy.h: New file.
* sysdeps/cris/memusage.h: New file.
* sysdeps/cris/setjmp.S: New file.
* sysdeps/cris/sysdep.h: New file.
* sysdeps/cris/wordcopy.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* elf/elf.h: Add new relocations for CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* shlib-versions: Add cases for Linux on CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* configure.in (ASM_LINE_SEP tests): Handle CRIS assembly, with
';' for comments and '@' for line separator.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/hppa/sysdep.h (INLINE_SYSCALL): Fix
typo; s/==/=/ for assignment.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* malloc/Makefile: Correct comment; mtrace is Perl, not AWK.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv_simple.c (internal_ucs4_loop_unaligned): Check for
empty input before checking full output.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv.c (__gconv): Don't derefer parameter cd before
checking if == -1L.
2001-04-08 Ulrich Drepper <drepper@redhat.com>
* inet/rexec.c (rexec_af): Avoid calling perror with errno being set.
