We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This test implements following logic:
1) Create POSIX message queue.
Register a notification with mq_notify (using NULL attributes).
Then immediately unregister the notification with mq_notify.
Helper thread in a vulnerable version of glibc
should cause NULL pointer dereference after these steps.
2) Once again, register the same notification.
Try to send a dummy message.
Test is considered successfulif the dummy message
is successfully received by the callback function.
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbols were moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
The shared librt is now empty, so this commit adds a placeholder
symbol at the base version, GLIBC_2.2, and potentially at the
GLIBC_2.3.3 version as well (the leftover from the int/timer_t ABI
transition).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
timer_create and timer_delete are tied together via the int/timer_t
compatibility code. The way the ABI intransition is implemented
is changed with this commit: the implementation is now consolidated
in one file with a TIMER_T_WAS_INT_COMPAT check.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A placeholder symbol is needed on some architectures for the
GLIBC_2.3.4 version.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
A placeholder symbol is required to keep the GLIBC_2.7 version.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
An explicit call from fork into the mq_notify implementation replaces
the previous use of pthread_atfork.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
To introduce the proper symbol versioning, the implementation of
the system call wrapper us moved to a C file.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
Placeholder symbols are needed on some architectures, to keep the
GLIBC_2.1 and GLIBC_2.4 symbol versions around.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Move the common code into rt/lio_listio-common.c and include
the file in both rt/lio_listio.c and rt/lio_listio64.c. The common
code automatically defines both public symbols for __WORDSIZE == 64.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Both symbols have to be moved at the same time because they
are intertwined for __WORDSIZE == 64. The treatment of this case
is also changed to match more closely how the other files suppress
the declaration of the *64 identifier.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
There is a minor oddity here: This is generic code shared with Hurd,
and Hurd does not have time64 support. This is why the
versioned_symbol export for __aio_suspend_time64 is restricted to
the PTHREAD_IN_LIBC code.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Both symbols have to be moved at the same time because they
are intertwined for __WORDSIZE == 64. The treatment of this case
is also changed to match more closely how the other files suppress
the declaration of the *64 identifier.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
A version placeholder symbol is needed on alpha and sparc because
of the additional symbols formerly at version GLIBC_2.3.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>:
This commit also moves the aio_misc and aio_sigquue helper,
so GLIBC_PRIVATE exports need to be added.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The pthread-based implementation is the generic one. Replacing
the stubs makes it clear that they do not have to be adjusted for
the libpthread move.
Result of:
git mv -f sysdeps/pthread/aio_misc.h sysdeps/generic/
git mv sysdeps/pthread/timer_routines.c sysdeps/htl/
git mv -f sysdeps/pthread/{aio,lio,timer}_*.c rt/
Followed by manual adjustment of the #include paths in
sysdeps/unix/sysv/linux/wordsize-64, and a move of the version
definitions formerly in sysdeps/pthread/Versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
To avoid localplt failures, use __open64_nocancel instead of
pthread_setcancelstate and open.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Result of: git mv -f sysdeps/posix/shm_unlink.c rt
and manual removal of the _POSIX_MAPPED_FILES preprocessor condition.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Result of: git mv -f sysdeps/posix/shm_open.c rt
and manual removal of the _POSIX_MAPPED_FILES preprocessor condition.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The variable name was incorrect, and the existing librt-routines
variable needs to be augmented (not assigned) in rt/Makefile.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These make variables can be used to add routines to different
libraries for the Hurd and Linux builds.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Append PID to names passed to shm_open in shm tests to avoid random
FAIL: rt/tst-shm-cancel
FAIL: rt/tst-shm
due to the same name passed to shm_open and shm_unlink when more than
one "make check" running in parallel on the same machine.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The behavior of the signal mask on threads created by timer_create
for SIGEV_THREAD timers are implementation-defined and glibc explicit
unblocks all signals before calling the user-defined function.
This behavior, although not incorrect standard-wise, opens a race if a
program using a blocked rt-signal plus sigwaitinfo (and without an
installed signal handler for the rt-signal) receives a signal while
executing the used-defined function for SIGEV_THREAD.
A better alternative discussed in bug report is to rather block all
signals (besides the internal ones not available to application
usage).
This patch fixes this issue by only unblocking SIGSETXID (used on
set*uid function) and SIGCANCEL (used for thread cancellation).
Checked on x86_64-linux-gnu and i686-linux-gnu.
It moves the missing CFLAGS from rt/Makefile to time/Makefile missing
from 7b5af2d8f2 (Finish move of clock_* functions to libc. [BZ #24959]).
Checked on powerpc64le-linux-gnu.
* rt/Makefile (CFLAGS-clock_nanosleep.c): Move to ...
* time/Makefile (CFLAGS-clock_nanosleep.c): ... here.
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
With clock_getres, clock_gettime, and clock_settime refactor to remove the
generic CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID support through
hp-timing, there is no usage of internal __get_clockfreq. This patch removes
both generic and Linux implementation..
Checked with a build against aarch64-linux-gnu, i686-linux-gnu, ia64-linux-gnu,
sparc64-linux-gnu, powerpc-linux-gnu-power4.
* include/libc-internal.h (__get_clockfreq): Remove prototype.
* rt/Makefile (clock-routines): Remove get_clockfreq.
* rt/get_clockfreq.c: Remove file.
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Move code to ...
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c: ... here.
As the result of commit 6e6249d0b4
("BZ#14743: Move clock_* symbols from librt to libc."), in glibc 2.17,
clock_gettime, clock_getres, clock_settime, clock_getcpuclockid,
clock_nanosleep were added to libc, and the file rt/clock-compat.c
was added with forwarders to the actual implementations in libc.
These forwarders were wrapped in
#if SHLIB_COMPAT (librt, GLIBC_2_2, GLIBC_2_17)
so that they are not present for newer architectures (such as
powerpc64le) with a 2.17 or later ABI baseline. But the forwarders
were not marked as compatibility symbols. As a result, on older
architectures, historic configure checks such as
AC_CHECK_LIB(rt, clock_gettime)
still cause linking against librt, even though this is completely
unnecessary. It also creates a needless porting hazard because
architectures behave differently when it comes to symbol availability.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
