ia64, s390-64, sparc64 and x86_64 host their own implementation of
sigpending() in corresponding files, but they are identical to generic
linux file despite few comments. This patch removes that files, so the
implementation of sigpending() is taken from sysdeps/unix/sysv/linux
for all ports.
Build-tested on x86_64.
* sysdeps/unix/sysv/linux/ia64/sigpending.c: Remove file.
* sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigpending.c: Likewise.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
As shown in some buildbot issues on aarch64 and powerpc, calling
clone (VFORK) and waitpid (WNOHANG) does not guarantee the child
is ready to be collected. This patch changes the call back to 0
as before fe05e1cb6d fix.
This change can lead to the scenario 4.3 described in the commit,
where the waitpid call can hang undefinitely on the call. However
this is also a very unlikely and also undefinied situation where
both the caller is trying to terminate a pid before posix_spawn
returns and the race pid reuse is triggered. I don't see how to
correct handle this specific situation within posix_spawn.
Checked on x86_64-linux-gnu, aarch64-linux-gnu and
powerpc64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Use 0 instead of
WNOHANG in waitpid call.
As noted by Florian Weimer, current Linux posix_spawn implementation
can trigger an assert if the auxiliary process is terminated before
actually setting the err member:
340 /* Child must set args.err to something non-negative - we rely on
341 the parent and child sharing VM. */
342 args.err = -1;
[...]
362 new_pid = CLONE (__spawni_child, STACK (stack, stack_size), stack_size,
363 CLONE_VM | CLONE_VFORK | SIGCHLD, &args);
364
365 if (new_pid > 0)
366 {
367 ec = args.err;
368 assert (ec >= 0);
Another possible issue is killing the child between setting the err and
actually calling execve. In this case the process will not ran, but
posix_spawn also will not report any error:
269
270 args->err = 0;
271 args->exec (args->file, args->argv, args->envp);
As suggested by Andreas Schwab, this patch removes the faulty assert
and also handles any signal that happens before fork and execve as the
spawn was successful (and thus relaying the handling to the caller to
figure this out). Different than Florian, I can not see why using
atomics to set err would help here, essentially the code runs
sequentially (due CLONE_VFORK) and I think it would not be legal the
compiler evaluate ec without checking for new_pid result (thus there
is no need to compiler barrier).
Summarizing the possible scenarios on posix_spawn execution, we
have:
1. For default case with a success execution, args.err will be 0, pid
will not be collected and it will be reported to caller.
2. For default failure case, args.err will be positive and the it will
be collected by the waitpid. An error will be reported to the
caller.
3. For the unlikely case where the process was terminated and not
collected by a caller signal handler, it will be reported as succeful
execution and not be collected by posix_spawn (since args.err will
be 0). The caller will need to actually handle this case.
4. For the unlikely case where the process was terminated and collected
by caller we have 3 other possible scenarios:
4.1. The auxiliary process was terminated with args.err equal to 0:
it will handled as 1. (so it does not matter if we hit the pid
reuse race since we won't possible collect an unexpected
process).
4.2. The auxiliary process was terminated after execve (due a failure
in calling it) and before setting args.err to -1: it will also
be handle as 1. but with the issue of not be able to report the
caller a possible execve failures.
4.3. The auxiliary process was terminated after args.err is set to -1:
this is the case where it will be possible to hit the pid reuse
case where we will need to collected the auxiliary pid but we
can not be sure if it will be expected one. I think for this
case we need to actually change waitpid to use WNOHANG to avoid
hanging indefinitely on the call and report an error to caller
since we can't differentiate between a default failure as 2.
and a possible pid reuse race issue.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Handle the case where
the auxiliary process is terminated by a signal before calling _exit
or execve.
After commit 37f802f864 (Remove
__need_IOV_MAX and __need_FOPEN_MAX), UIO_MAXIOV is no longer supplied
(indirectly) through <bits/stdio_lim.h>, so sysdeps/posix/sysconf.c no
longer sees the definition.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
Current GLIBC has two ways to implement the single thread optimization
on syscalls to avoid calling the cancellation path: either by using
global variables (__{libc,pthread}_multiple_thread) or by accessing
the TCB field (defined by TLS_MULTIPLE_THREADS_IN_TCB). Both the
variables and the macros to acces its value are defined in the
architecture sysdep-cancel.h header.
This patch consolidates its definition on only one header,
sysdeps/unix/sysv/linux/sysdep-cancel.h, and adds a new define
(SINGLE_THREAD_BY_GLOBAL) which the architecture defines if it prefer
to use the global variables instead of the TCB field. This is an
optimization, so if the architecture does not define it, the TCB
method will be used as default.
Checked on x86_64-linux-gnu and on a build with major touched
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu,
mips-linux-gnu, mips64-linux-gnu, powerpc-linux-gnu,
powerpc64le-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu,
sparcv9-linux-gnu, sparc64-linux-gnu, tilegx-linux-gnu).
* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Remove file.
* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(SINGLE_THREAD_BY_GLOBAL): Define.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/sysdep.h
(SINGLE_THREAD_BY_GLOBAL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
32-bit SPARC libm should have compat symbols for copysignl
(GLIBC_2.0), fabsl (GLIBC_2.0), fmal (GLIBC_2.1), pointing to the
double functions; they were present in glibc 2.8, for example, but are
now missing, probably when optimized SPARC function implementations
were added without appropriate compat symbol handling. The same
applies to copysignl in libc. This patch restores those compat
symbols.
Tested with build-many-glibcs.py for sparcv9-linux-gnu.
[BZ #22229]
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include <math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
* sysdeps/sparc/sparc32/fpu/s_fma.c: Include <math_ldbl_opt.h>.
(fmal): Define as compat symbol at version GLIBC_2_1 for libm.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<math_ldbl_opt.h>
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c
[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h>.
[HAVE_AS_VIS3_SUPPORT] (fmal): Define as compat symbol at version
GLIBC_2_1 for libm.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Add
GLIBC_2.0 copysignl symbol.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Add
GLIBC_2.0 copysignl and fabsl and GLIBC_2.1 fmal symbols.
For static PIE code, PIC is defined and SHARED is undefined. We
should check SHARED instead PIC for SYSCALL_ERROR_NAME.
* sysdeps/unix/sysv/linux/tile/sysdep.h (SYSCALL_ERROR_NAME):
Check SHARED instead PIC.
Hide internal fadvise64/fallocate64 functions to allow direct access
within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/posix_fadvise64.c
(__posix_fadvise64_l64): Add Add libc_hidden_proto and
libc_hidden_def.
* sysdeps/unix/sysv/linux/posix_fallocate64.c
(__posix_fallocate64_l64): Likewise.
Hide internal __sched_setaffinity_new function to allow direct access
within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__sched_setaffinity_new): Add libc_hidden_proto and
libc_hidden_def.
Hide internal __glob64 function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* include/glob.h (__glob64): Add libc_hidden_proto.
* sysdeps/unix/sysv/linux/glob64.c (__glob64): Add
libc_hidden_def.
Hide internal __new_getrlimit function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getrlimit64.c (__new_getrlimit): Add
attribute_hidden.
Hide internal __tcgetattr function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* include/termios.h (__tcgetattr): Add libc_hidden_proto.
* sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Add
libc_hidden_def.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise.
* termios/tcgetattr.c (__tcgetattr): Likewise.
Hide internal __get_sol function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getsourcefilter.c: Include
"getsourcefilter.h".
* sysdeps/unix/sysv/linux/getsourcefilter.h: New file.
* sysdeps/unix/sysv/linux/setsourcefilter.c: Include
"getsourcefilter.h".
(__get_sol): Removed.
Hide internal __bsd_getpt function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getpt.c (__bsd_getpt): Add
attribute_hidden.
Hide internal __sysinfo function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h (__sysinfo): Add
attribute_hidden.
Hide internal __mremap function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
__GI___mremap is defined when sysdeps/unix/syscalls.list is used to
generate mremap. Otherwise libc_hidden_def is needed explicitly.
[BZ #18822]
* include/sys/mman.h (__mremap): Add libc_hidden_proto.
* sysdeps/unix/sysv/linux/m68k/mremap.S (__mremap): Add
libc_hidden_def.
Hide internal __ioctl function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
__GI___ioctl is defined when sysdeps/unix/syscalls.list is used to
generate ioctl. Otherwise libc_hidden_def is needed explicitly.
[BZ #18822]
* include/sys/ioctl.h (__ioctl): Add libc_hidden_proto.
* misc/ioctl.c (__ioctl): Add libc_hidden_def.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/aarch64/ioctl.S (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/ioctl.c (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/ioctl.S (__ioctl): Likewise.
Mark internal netlink functions with attribute_hidden to allow direct
access within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/netlinkaccess.h (__netlink_open): Add
attribute_hidden.
(__netlink_close): Likewise.
(__netlink_free_handle): Likewise.
(__netlink_request): Likewise.
Mark internal dirent functions with attribute_hidden to allow direct
access within libc.so and libc.a without using GOT nor PLT. __readdir64
is hidden with libc_hidden_proto and libc_hidden_def since the exported
readdir64 is an alias of __readdir64.
[BZ #18822]
* include/dirent.h (__opendir): Always add attribute_hidden.
(__fdopendir): Likewise.
(__closedir): Likewise.
(__readdir): Likewise.
(__readdir64): Add libc_hidden_proto.
* sysdeps/mach/hurd/readdir64.c (__readdir64): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/i386/readdir64.c (__readdir64): Likewise.
* sysdeps/unix/sysv/linux/readdir64.c (__readdir64): Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/readdir.c (__GI___readdir64):
New alias.
Mark __internal_statvfs[64] with attribute_hidden to allow direct access
to them within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/fstatvfs.c: Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs): Removed.
* sysdeps/unix/sysv/linux/fstatvfs64.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs64): Removed.
* sysdeps/unix/sysv/linux/internal_statvfs.c: Include
"internal_statvfs.h" instead of <sys/statvfs.h>.
* sysdeps/unix/sysv/linux/internal_statvfs.h: New file.
* sysdeps/unix/sysv/linux/statvfs.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs): Removed.
* sysdeps/unix/sysv/linux/statvfs64.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs64): Removed.
__setcontext on hppa.
* sysdeps/unix/sysv/linux/hppa/getcontext.S (__getcontext): Save return
pointer in frame.
* sysdeps/unix/sysv/linux/hppa/setcontext.S (__setcontext): Likewise.
Correct offset used to restore PIC register.
This patch follows commit 5554304f0 (posix: Allow glob to match dangling
symlinks [BZ #866]) by adding a compat symbol that follow previous
semantic of not following dangling symlinks and thus avoiding call
gl_lstat with GLOB_ALTDIRFUNC.
It avoids failure with old binaries that not set the alternate function
pointer for lstat (GNUmake for instance). The following scenario, for
instance, fails with current GNUmake because glibc will access unitialized
memory when calling gl_lstat:
$ cat src/t/t.c
int main ()
{
return 0;
}
$ cat Makefile
SRC = $(wildcard src/*/t.c)
OBJ = $(patsubst src/%.c, obj/%.o, $(SRC))
prog: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) $(LIBS) $(OBJ) -o prog
obj/%.o: src/%.c
$(CC) $(CFLAGS) -c $< -o $@
$ make
This works as expected with the patch applied. Since it is for generic
ABI, default compat symbols are added with override for Linux due LFS.
Now we have two compat symbols for glob on Linux:
1. sysdeps/unix/sysv/linux/oldglob.c which implements glob64 with
the old dirent layout. For this implementation I also set it to
not follow dangling symlinks (which is the safest path).
2. sysdeps/unix/sysv/linux/glob{64}-lstat-compat.c which implements
the compat symbol for dangling symlinks. As for generic glob,
the implementation uses XSTAT_IS_XSTAT64 to define whether
both __glob_lstat_compat and __glob64_lstat_compat should be
different implementations. For archictures that define
XSTAT_IS_XSTAT64, __glob_lstat_compat is aliased to
__glob64_lstat_compat.
3. sysdeps/unix/sysv/linux/alpha/oldglob.c with a different glob_t
layout. As for 1. this patch changes it to not follow dangling
symlinks.
The patch also bumps _GNU_GLOB_INTERFACE_VERSION to 2 to advertise the
new semantic. On GNUmake, for instance, it will force to it use its
internal glob implementation instead and avoiding triggering the same
failure on builds against newer GLIBCs.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
with a build against the major ABIs required to check for the abilist.
The changes should also work on gnulib (I run gnulib-tool.py check glob
and it shown no regressions).
[BZ #22183]
* include/gnu-versions.h (_GNU_GLOB_INTERFACE_VERSION): Increase
version to 2.
* posix/Makefile (routines): Add glob-lstat-compat and
glob64-lstat-compat.
* posix/Versions (GLIBC_2.27, glob, glob64): Add symbol version.
* posix/glob-lstat-compat.c: New file.
* posix/glob64-lstat-compat.c: Likewise.
* posix/tst-glob_lstat_compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob64-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob.c: Remove file.
* posix/glob.c (glob_lstat): New function.
(glob): Rename to __glob and add versioned symbol to 2.27.
(glob_in_dir): Use glob_lstat.
* posix/glob64.c (glob64): Add GLOB_ATTRIBUTE.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/glob.c (glob): Add versioned symbol for
2.27.
* sysdeps/unix/sysv/linux/glob64.c (glob64): Likewise.
* sysdeps/unix/sysv/linux/oldglob.c (GLOB_NO_LSTAT): Define.
* sysdeps/unix/sysv/linux/alpha/oldglob.c (__old_glob): Do not use
gl_lstat on glob call.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add GLIBC_2.27 glob
and glob64 symbols.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
This patch changes the expf and exp2f error handling semantics to only
set errno accoring to POSIX rules. New symbol version is introduced at
GLIBC_2.27.
The old wrappers are kept for compat symbols.
Internal calls to __expf now get the new error semantics, this seems to
only affect sysdeps/i386/fpu/s_expm1f.S where the errno-only behaviour
should be correct.
ia64 needed assembly change to have the new and compat versioned symbol
map to the same function.
All linux libm abilists are updated.
* math/Versions (expf): New libm symbol at GLIBC_2.27.
(exp2f): Likewise.
* math/w_exp2f.c: New file.
* math/w_expf.c: New file.
* math/w_exp2f_compat.c (__exp2f_compat): For compat symbol only.
* math/w_expf_compat.c (__expf_compat): Likewise.
* sysdeps/ia64/fpu/e_exp2f.S: Add versioned symbols.
* sysdeps/ia64/fpu/e_expf.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The recent fexecve changes broke the build on (at least) alpha (maybe
other configurations, that was the first breakage I saw in my
build-many-glibcs.py run):
In file included from ../sysdeps/unix/sysv/linux/alpha/sysdep.h:29:0,
from ../sysdeps/alpha/nptl/tls.h:31,
from ../include/errno.h:25,
from ../sysdeps/unix/sysv/linux/fexecve.c:18:
../sysdeps/unix/sysv/linux/fexecve.c: In function 'fexecve':
../sysdeps/unix/alpha/sysdep.h:203:10: error: 'sizeof' on array function parameter 'argv' will return size of 'char * const*' [-Werror=sizeof-array-argument]
(sizeof(arg) == 4 ? (long)(int)(long)(arg) : (long)(arg))
^
../sysdeps/unix/alpha/sysdep.h:302:26: note: in expansion of macro 'syscall_promote'
register long _tmp_18 = syscall_promote (arg3); \
^~~~~~~~~~~~~~~
../sysdeps/unix/alpha/sysdep.h:173:2: note: in expansion of macro 'inline_syscall5'
inline_syscall##nr(__NR_##name, args); \
^~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/alpha/sysdep.h:85:2: note: in expansion of macro 'INLINE_SYSCALL1'
INLINE_SYSCALL1(name, nr, args); \
^~~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/fexecve.c:42:3: note: in expansion of macro 'INLINE_SYSCALL'
INLINE_SYSCALL (execveat, 5, fd, "", argv, envp, AT_EMPTY_PATH);
^~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/fexecve.c:33:30: note: declared here
fexecve (int fd, char *const argv[], char *const envp[])
^~~~
This patch fixes this similarly to previous fixes for such issues: use
&argv[0] and &envp[0] as the syscall macro arguments. Tested
(compilation only) for alpha-linux-gnu with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/fexecve.c (fexecve) [__NR_execveat]:
Explicitly take address of first element of array arguments in
call to INLINE_SYSCALL.
This patch fixes the compat glob implementation consolidation from
commit 116f1c64d with the following changes:
- Add a compat implementation on s390 to avoid the architecture
to build the symbols on default linux oldglob.c by setting
GLOB_NO_OLD_VERSION.
- Remove the duplicate rule to build oldglob on alpha.
Checked on s390-linux-gnu and alpha-linux-gnu using build-many-glibc.py.
* sysdeps/unix/sysv/linux/s390/s390-32/oldglob.c: New file.
* sysdeps/unix/sysv/linux/alpha/Makefile
[$(subdir) = csu] (sysdep_routines): Remove rule.
* manual/tunables.texi (glibc.tune.cpu): Add thunderx2t99 and
thunderx2t99p1 to list of cpu names.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add thunderx2t99 and thunderx2t99p1 entries to cpu_list.
While reviewing Linux 4.13 for glibc header changes needed, I noticed
that bits/fcntl-linux.h was missing F_ADD_SEALS etc. from Linux 3.17.
I didn't find any discussion indicating this omission is deliberate.
Now, these interfaces can only be used with file descriptors created
with memfd_create, and we don't have a memfd_create wrapper in glibc
(a patch was submitted in October 2014, albeit without documentation /
tests, and discussions continued over the next few months, but without
consensus on whether to add the interface - and we still lack any
general consensus on syscall wrappers), but I don't think that's a
reason to exclude the constants from bits/fcntl-linux.h (especially as
the header does not look compatible with simultaneously including
linux/fcntl.h).
(Some of those 2014/2015 discussions raised concerns about difficulty
using the memfd_create / sealing interface, but those seem to me more
like a question of whether it should be part of the OS-independent GNU
API - in my view, even fairly specialized syscalls ought to have
wrappers added to glibc if not obsolescent, but there may be cases
where we only want to include them in the Linux-specific API and
anything in the OS-independent GNU API should be different - rather
than being relevant to whether constants for use with fcntl should
appear in headers.)
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]
(F_ADD_SEALS): New macro.
[__USE_GNU] (F_GET_SEALS): Likewise.
[__USE_GNU] (F_SEAL_SEAL): Likewise.
[__USE_GNU] (F_SEAL_SHRINK): Likewise.
[__USE_GNU] (F_SEAL_GROW): Likewise.
[__USE_GNU] (F_SEAL_WRITE): Likewise.
This patch consolidates the glob implementation. The main changes are:
* On Linux all implementation now uses the default one at
sysdeps/unix/sysv/linux/glob{free}{64}.c with the exception
of alpha (which requires specific versioning) and s390-32 (which
different than other 32 bits ports it does not add a compat one
symbol for 2.1 version).
* The default implementation uses XSTAT_IS_XSTAT64 to define whether
both glob{free} and glob{free}64 should be different implementations.
For archictures that define XSTAT_IS_XSTAT64, glob{free} is an alias
to glob{free}64.
* Move i386 olddirent.h header to Linux default directory, since it is
the only header with this name and it is shared among different
architectures (and used on compat glob symbol as well).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* sysdeps/unix/sysv/linux/arm/glob64.c: Remove file.
* sysdeps/unix/sysv/linux/i386/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/glob.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/glob.c: Likewise.
* sysdeps/wordsize-64/glob64.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/glob.c: New file.
* sysdeps/unix/sysv/linux/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c [SHLIB_COMPAT]: Also
adds !GLOB_NO_OLD_VERSION as an extra condition.
* sysdeps/unix/sysv/linux/i386/alphasort64.c: Include olddirent.h
using relative path instead of absolute one.
* sysdeps/unix/sysv/linux/i386/getdents64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/readdir64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/readdir64_r.c: Likewise.
* sysdeps/unix/sysv/linux/i386/versionsort64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/olddirent.h: Move to ...
* sysdeps/unix/sysv/linux//olddirent.h: ... here.
This patch syncs posix/glob.c implementation with gnulib version
b5ec983 (glob: simplify symlink detection). The only difference
to gnulib code is
* DT_UNKNOWN, DT_DIR, and DT_LNK definition in the case there
were not already defined. Gnulib code which uses
HAVE_STRUCT_DIRENT_D_TYPE will redefine them wrongly because
GLIBC does not define HAVE_STRUCT_DIRENT_D_TYPE. Instead
the patch check for each definition instead.
Also, the patch requires additional globfree and globfree64 files
for compatibility version on some architectures. Also the code
simplification leads to not macro simplification (not need for
NO_GLOB_PATTERN_P anymore).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/Makefile (routines): Add globfree, globfree64, and
glob_pattern_p.
* posix/flexmember.h: New file.
* posix/glob_internal.h: Likewise.
* posix/glob_pattern_p.c: Likewise.
* posix/globfree.c: Likewise.
* posix/globfree64.c: Likewise.
* sysdeps/gnu/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* posix/glob.c (HAVE_CONFIG_H): Use !_LIBC instead.
[NDEBUG): Remove comments.
(GLOB_ONLY_P, _AMIGA, VMS): Remove define.
(dirent_type): New type. Use uint_fast8_t not
uint8_t, as C99 does not require uint8_t.
(DT_UNKNOWN, DT_DIR, DT_LNK): New macros.
(struct readdir_result): Use dirent_type. Do not define skip_entry
unless it is needed; this saves a byte on platforms lacking d_ino.
(readdir_result_type, readdir_result_skip_entry):
New functions, replacing ...
(readdir_result_might_be_symlink, readdir_result_might_be_dir):
these functions, which were removed. This makes the callers
easier to read. All callers changed.
(D_INO_TO_RESULT): Now empty if there is no d_ino.
(size_add_wrapv, glob_use_alloca): New static functions.
(glob, glob_in_dir): Check for size_t overflow in several places,
and fix some size_t checks that were not quite right.
Remove old code using SHELL since Bash no longer
uses this.
(glob, prefix_array): Separate MS code better.
(glob_in_dir): Remove old Amiga and VMS code.
(globfree, __glob_pattern_type, __glob_pattern_p): Move to
separate files.
(glob_in_dir): Do not rely on undefined behavior in accessing
struct members beyond their bounds. Use a flexible array member
instead
(link_stat): Rename from link_exists2_p and return -1/0 instead of
0/1. Caller changed.
(glob): Fix memory leaks.
* posix/glob64 (globfree64): Move to separate file.
* sysdeps/gnu/glob64.c (NO_GLOB_PATTERN_P): Remove define.
(globfree64): Remove hidden alias.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Add
oldglob.
* sysdeps/unix/sysv/linux/alpha/glob.c (__new_globfree): Move to
separate file.
* sysdeps/unix/sysv/linux/i386/glob64.c (NO_GLOB_PATTERN_P): Remove
define.
Move compat code to separate file.
* sysdeps/wordsize-64/glob.c (globfree): Move definitions to
separate file.
This patch adds the new SOL_TLS constant from Linux 4.13 to the Linux
bits/socket.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/socket.h (SOL_TLS): New macro.
As far as I can tell Linux 4.13 does not add any new syscalls not
included in syscall-names.list. This patch updates the version number
in that file accordingly.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.13.
This patch adds O_TMPFILE support to tmpfile on Linux. This is
similar to the previous suggestion by Andreas Schwab [1] with the
difference the file descriptor creation is parameterized to
compartmentalize Linux only open flags (O_TMPFILE) on sysdeps.
Checked on x86_64-linux-gnu.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Andreas Schwab <schwab@suse.de>
[BZ #21530]
* include/stdio.h (__gen_tempfd): New function.
* stdio-common/Makefile (routines): Add gentempfd.
* stdio-common/gentempfd.c: New file.
* sysdeps/unix/sysv/linux/gentempfd.c: Likewise.
* stdio-common/tmpfile.c (tmpfile): First try to use a system specific
unnamed file first.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg01293.html
The NO_CANCELLATION macro is used currently on generic headers to
define non cancellable syscalls and on Linux fcntl to implement the non
cancellable variation. Former should be single-handled by not-cancel.h
header and former could be simplified build both cancellable and non
cancellable for default objects and alias the non-cancellable to default
one for rtld ones (since Linux already support cancellation as default).
This patch thus removes the NO_CANCELLATION macro and its usage. The
generic non cancellable fcntl is route to internal fcntl.
Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with
a build again major ABIs.
* sysdeps/generic/not-cancel.h (NO_CANCELLATION): Remove macro.
* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h (NO_CANCELLATION):
Likewise
* sysdeps/unix/sysv/linux/sparc/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Add
hidden prototype.
* sysdeps/unix/sysv/linux/fcntl.c (__fcntl_nocancel): Define only
for !IS_IN (rtld) and remove NO_CANCELLATION usage.
This patch completes the ucontext.h namespace fixes by fixing issues
related to the use of struct sigcontext as mcontext_t, and inclusion
of <bits/sigcontext.h> even when struct sigcontext is not so used.
Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the
way to get the sigcontext structure is by including <signal.h> (in a
context where __USE_MISC is defined); the sysdeps/generic version of
sys/ucontext.h keeps the inclusion by necessity, with a comment about
how this is not namespace-clean, but the only configuration that used
it, MicroBlaze, gets its own version of the header in this patch.
Where mcontext_t was typedefed to struct sigcontext, the contents of
struct sigcontext are inserted (with appropriate namespace handling to
prefix fields with __ when __USE_MISC is not defined); review should
check that this has been done correctly in each case, whether the
definition of struct sigcontext comes from glibc headers or from the
Linux kernel. This changes C++ name mangling on affected
architectures (which do not include x86_64/x86).
Tested for x86_64, and with build-many-glibcs.py.
2017-08-14 Joseph Myers <joseph@codesourcery.com>
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/generic/sys/ucontext.h: Add comment about use of struct
sigcontext and namespace requirements.
* sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/m68k/sys/ucontext.h: Likewise.
* sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use
__glibc_reserved1 instead of __reserved.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): New macro.
(struct __ia64_fpreg_mcontext): New type.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
(_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext.
(uc_sigmask): Define using __ctx.
(uc_stack): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<bits/sigcontext.h>. Include <bits/types.h>.
* conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove.
(test-xfail-XPG42/sys/wait.h/conform): Likewise.
(test-xfail-XPG42/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
Fix a commit cc25c8b4c1 ("New pthread rwlock that is more scalable.")
regression and prevent uncontrolled stack space usage from happening
when a 5-, 6- or 7-argument syscall wrapper is placed in a loop.
The cause of the problem is the use of `alloca' in regular MIPS/Linux
wrappers to force the use of the frame pointer register in any function
using one or more of these wrappers. Using the frame pointer register
is required so as not to break frame unwinding as the the stack pointer
is lowered within the inline asm used by these wrappers to make room for
the stack arguments, which 5-, 6- and 7-argument syscalls use with the
o32 ABI.
The regular MIPS/Linux wrappers are macros however, expanded inline, and
stack allocations made with `alloca' are not discarded until the return
of the function they are made in. Consequently if called in a loop,
then virtual memory is wasted, and if the loop goes through enough
iterations, then ultimately available memory can get exhausted causing
the program to crash.
Address the issue by replacing the inline code with standalone assembly
functions, which rely on the compiler arranging syscall arguments
according to the o32 function calling convention, which MIPS/Linux
syscalls also use, except for the syscall number passed and the error
flag returned. This way there is no need to fiddle with the stack
pointer anymore and all that has to be handled in the new standalone
functions is the special handling of the syscall number and the error
flag.
Redirect 5-, 6- or 7-argument MIPS16/Linux syscall wrappers to these new
functions as well, so as to avoid an unnecessary double call the
existing wrappers would cause with the new arrangement.
[BZ #21956]
* sysdeps/unix/sysv/linux/mips/mips32/mips16/Makefile
[subdir = misc] (sysdep_routines): Remove `mips16-syscall5',
`mips16-syscall6' and `mips16-syscall7'.
(CFLAGS-mips16-syscall5.c, CFLAGS-mips16-syscall6.c)
(CFLAGS-mips16-syscall7.c): Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/Versions (libc):
Remove `__mips16_syscall5', `__mips16_syscall6' and
`__mips16_syscall7'.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall0.c
(__mips16_syscall0): Rename `__mips16_syscall_return' to
`__mips_syscall_return'.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall1.c
(__mips16_syscall1): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall2.c
(__mips16_syscall2): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall3.c
(__mips16_syscall3): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall4.c
(__mips16_syscall4): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall5.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall6.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall7.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall.h
(__mips16_syscall5): Expand to `__mips_syscall5' rather than
`__mips16_syscall5'. Remove prototype.
(__mips16_syscall6): Expand to `__mips_syscall6' rather than
`__mips16_syscall6'. Remove prototype.
(__mips16_syscall7): Expand to `__mips_syscall7' rather than
`__mips16_syscall7'. Remove prototype.
(__nomips16, __mips16_syscall_return): Move to...
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(__nomips16, __mips_syscall_return): ... here.
[__mips16] (INTERNAL_SYSCALL_NCS): Rename
`__mips16_syscall_return' to `__mips_syscall_return'.
[__mips16] (INTERNAL_SYSCALL_MIPS16): Pass `number' to
`internal_syscall##nr'.
[!__mips16] (INTERNAL_SYSCALL): Pass `SYS_ify (name)' to
`internal_syscall##nr'.
(FORCE_FRAME_POINTER): Remove.
(__mips_syscall5): New prototype.
(internal_syscall5): Rewrite to call `__mips_syscall5'.
(__mips_syscall6): New prototype.
(internal_syscall6): Rewrite to call `__mips_syscall6'.
(__mips_syscall7): New prototype.
(internal_syscall7): Rewrite to call `__mips_syscall7'.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall5.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall6.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall7.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/Makefile [subdir = misc]
(sysdep_routines): Add libc-do-syscall.
* sysdeps/unix/sysv/linux/mips/mips32/Versions (libc): Add
`__mips_syscall5', `__mips_syscall6' and `__mips_syscall7'.
Commit 39e7a5a668 added stdint.h
to sys/procfs.h, but it is included into signal.h by default and
there is code that does not expect stdint.h to be visible there,
so use __uint64_t instead of uint64_t.
This commit changes the way the list of SYS_* system call macros is
created on Linux. glibc now contains a list of all known system
calls, and the generated <bits/syscall.h> file defines the SYS_ macro
only if the correspnding __NR_ macro is defined by the kernel headers.
As a result, glibc does not have to be rebuilt to pick up system calls
if the glibc sources already know about them. This means that glibc
can be built with older kernel headers, and if the installed kernel
headers are upgraded afterwards, additional SYS_ macros become
available as long as glibc has a record for those system calls.
This patch consolidate the remaning non cancellable syscall definitions
on not-cancel.h header. They are:
* __fcntl_nocancel: Moved from fcntl.h to not-cancel.h.
* __sigsuspend_nocancel: Removed since 988f991b50 it is not used or
defined anymore.
* __nanosleep_nocancel: Removed since 6f33fd046b it is defined on
not-cancel.h.
Now all non-cancellable syscall definition are defined on not-cancel
(the only exceptions is the stdio symbol __fxprintf_nocancel which
uses non cancellable open and it is used on getopt implementation).
Checked on x86_64-linux-gnu and with build-many-glibc.py.
* include/fcntl.h (__fcntl_nocancel): Remove definition.
* include/signal.h (__sigsuspend_nocancel): Likewise.
* include/time.h (__nanosleep_nocancel): Likewise.
* sysdeps/generic/not-cancel.h (__fcntl_nocancel): New macro.
* login/utmp_file.c: Include non cancellable syscall header.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): New
prototype.
With {INLINE,INTERNAL}_SYSCALL macros fixed for 64-bits arguments on x32,
we can remove the p{read,write}{v} from auto-generation list.
Tested on x86_64 and x32.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (pread64): Remove.
(preadv64): Likewise.
(pwrite64(: Likewise.
(pwritev64): Likewise.
The problem for x32 is the {INTERNAL,INLINE}_SYSCALL C macros explicit
cast the arguments to 'long int', thus passing as 32 bits arguments
that should be passed to 64 bits.
Previous x32 implementation uses the auto-generated syscalls from
assembly macros (syscalls.list), so the {INTERNAL,INLINE}_SYSCALL
macros are never used with 64 bit argument in x32 (which are
internally broken for this ILP).
To fix it I used a strategy similar to MIPS64n32 (although both
ABI differs for some syscalls on how top pass 64-bits arguments)
where argument types for kernel call are defined using GCC extension
'typeof' with a arithmetic operation. This allows 64-bits arguments
to be defined while 32-bits argument will still passed as 32-bits.
I also cleanup the {INLINE,INTERNAL}_SYSCALL definition by defining
'inline_syscallX' instead of constructing the argument passing using
macros (it adds some readability) and removed the ununsed
INTERNAL_SYSCALL_NCS_TYPES define (since the patch idea is exactly to
avoid requiric explicit types passing).
Tested on x86_64 and x32.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(INTERNAL_SYSCALL_NCS_TYPES): Remove define.
(LOAD_ARGS_0): Likewise.
(LOAD_ARGS_1): Likewise.
(LOAD_ARGS_2): Likewise.
(LOAD_ARGS_3): Likewise.
(LOAD_ARGS_4): Likewise.
(LOAD_ARGS_5): Likewise.
(LOAD_ARGS_6): Likewise.
(LOAD_REGS_0): Likewise.
(LOAD_REGS_1): Likewise.
(LOAD_REGS_2): Likewise.
(LOAD_REGS_3): Likewise.
(LOAD_REGS_4): Likewise.
(LOAD_REGS_5): Likewise.
(LOAD_REGS_6): Likewise.
(ASM_ARGS_0): Likewise.
(ASM_ARGS_1): Likewise.
(ASM_ARGS_2): Likewise.
(ASM_ARGS_3): Likewise.
(ASM_ARGS_4): Likewise.
(ASM_ARGS_5): Likewise.
(ASM_ARGS_6): Likewise.
(LOAD_ARGS_TYPES_1): Likewise.
(LOAD_ARGS_TYPES_2): Likewise.
(LOAD_ARGS_TYPES_3): Likewise.
(LOAD_ARGS_TYPES_4): Likewise.
(LOAD_ARGS_TYPES_5): Likewise.
(LOAD_ARGS_TYPES_6): Likewise.
(LOAD_REGS_TYPES_1): Likewise.
(LOAD_REGS_TYPES_2): Likewise.
(LOAD_REGS_TYPES_3): Likewise.
(LOAD_REGS_TYPES_4): Likewise.
(LOAD_REGS_TYPES_5): Likewise.
(LOAD_REGS_TYPES_6): Likewise.
(TYPEFY): New define.
(ARGIFY): Likewise.
(internal_syscall0): Likewise.
(internal_syscall1): Likewise.
(internal_syscall2): Likewise.
(internal_syscall3): Likewise.
(internal_syscall4): Likewise.
(internal_syscall5): Likewise.
(internal_syscall6): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/times.c
(INTERNAL_SYSCALL_NCS): Remove define.
(internal_syscall1): Add define.
There is no current internal usage for non cancellable sigsuspend calls.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (sigsuspend_not_cancel): remove
macro.
* sysdeps/mach/hurd/sigsuspend.c (sigsuspend_not_cancel): remove
alias.
* sysdeps/unix/sysv/linux/not-cancel.h (sigsuspend_not_cancel):
likewise.
This patch consolidates all the non cancellable nanosleep calls to use
the __nanosleep_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Replace
nanosleep_not_cancel with __nanosleep_nocancel.
* sysdeps/generic/not-cancel.h (nanosleep_not_cancel): Remove macro.
(__nanosleep_nocancel): New macro.
* sysdeps/unix/sysv/linux/nanosleep.c (__nanosleep_nocancel): New
function.
* sysdeps/unix/sysv/linux/not-cancel.h (nanosleep_not_cancel): Remove
macro.
(__nanosleep_nocancel): New prototype.
This patch consolidates all the non cancellable pause calls to use
the __pause_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full): Replace
pause_not_cancel with __pause_nocancel.
* sysdeps/generic/not-cancel.h (pause_not_cancel): Remove macro.
(__pause_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (pause_not_cancel): Remove
macro.
(__pause_nocancel): New prototype.
* sysdeps/unix/sysv/linux/pause.c (__pause_nocancel): New function.
My refactoring of long double information
commit 0acb8a2a85
Author: Joseph Myers <joseph@codesourcery.com>
Date: Wed Dec 14 18:27:56 2016 +0000
Refactor long double information into bits/long-double.h.
resulted in sparc32 configurations installing the ldbl-opt version of
bits/long-double.h instead of the intended
sysdeps/unix/sysv/linux/sparc version.
For sparc32 by itself, this is not a problem, since the ldbl-opt
version is correct for sparc32. However, both sparc32 and sparc64 are
supposed to install sets of headers that work for both of them, so
that a single sysroot, whichever order the libraries are built and
installed in, works for both. The effect of having the wrong version
installed is that you end up with a miscompiled sparc64 libstdc++
which fails glibc's configure tests for the C++ compiler.
This patch moves the header from sysdeps/unix/sysv/linux/sparc to
separate copies of the same file for sparc32 and sparc64, to ensure it
comes before ldbl-opt in the sysdeps directory ordering.
Tested with build-many-glibcs.py for sparc64-linux-gnu and
sparcv9-linux-gnu.
[BZ #21987]
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Remove file
and copy to ...
* sysdeps/unix/sysv/linux/sparc/sparc32/bits/long-double.h:
... here.
* sysdeps/unix/sysv/linux/sparc/sparc64/bits/long-double.h:
... and here.
This patch consolidates all the non cancellable waitpid calls to use
the __waitpid_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* libio/ioopen.c (_IO_waitpid): Replace waitpid_not_cancel with
__waitpid_nocancel.
* sysdeps/generic/not-cancel.h (waitpid_not_cancel): Remove macro.
(__waitpid_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (waitpid_not_cancel): Remove
macro.
(__waitpid_nocancel): Replace macro with a function.
* sysdeps/unix/sysv/linux/waitpid.c (__waitpid_nocancel): New
function.
This patch consolidates all the non cancellable fcntl calls to use
the __fcntl_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Since its prototype is already defined at internal fcntl.h header, it
is removed from not-cancel.h one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* login/utmp_file.c (timeout_handler): Replace fcntl_not_cancel with
__fcntl_nocancel.
* sysdeps/generic/not-cancel.h (fcntl_not_cancel): Remove macro.
* sysdeps/unix/sysv/linux/not-cancel.h (fcntl_not_cancel): Likewise.
This patch consolidates all the non cancellable writev calls to use
the __writev_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* gmon/gmon.c (write_hist): Replace writev_not_cancel_no_status with
__writev_nocancel_nostatus.
(write_call_graph): Likewise.
(write_bb_counts): Likewise.
* resolv/herror.c (herror): Likewise.
* sysdeps/generic/not-cancel.h (writev_not_cancel_no_status): Remove
macro.
(__writev_nocancel_nostatus): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (writev_not_cancel_no_status):
Remove macro.
(__writev_nocancel_nostatus): New function.
This patch removes the SPARC-specific wrappers for sqrt and sqrtf.
These wrappers, by adding architecture-specific uses of _LIB_VERSION
and __kernel_standard, unnecessarily complicate cleanups of libm error
handling. They also do not serve a useful optimization purpose. GCC
knows about sqrt as a built-in function, and can generate direct calls
to a hardware square root instruction, either on its own, in the
-fno-math-errno case, or together with an inline check for the
argument being negative and a call to the out-of-line sqrt function
for error handling only in that case (and has been able to do so for a
long time). Thus in practice the wrapper will only be called only in
the case of negative arguments, which is not a case it is useful to
optimize for.
The removal of the wrappers also uncovers, and fixes, an old bug.
32-bit SPARC libm used (checked with glibc 2.8 binaries) to have a
sqrtl compat symbol, version GLIBC_2.0, for old binaries when sqrtl
was an alias of sqrt (I don't have pre-glibc-2.4 binaries for SPARC to
hand to check for the sqrtl symbol in those). This disappeared,
probably with:
commit 8847f03770
Author: David S. Miller <davem@davemloft.net>
Date: Tue Feb 28 22:37:58 2012 -0800
Add sparc optimized sqrt{,f}.
Removing the wrappers brings back the generic ldbl-opt logic for
creating such compat symbols, and so restores the compat symbol that
should be there. This could of course also be fixed in the wrappers -
but as noted above, the wrappers are optimizing a case it's not useful
to optimize, so the bug of the missing compat symbol serves to
illustrate the risks involved with the extra complexity of
architecture-specific function versions where not needed.
Tested with build-many-glibcs.py.
[BZ #21973]
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Remove file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S : Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Add
GLIBC_2.0 sqrtl symbol.
Since __syscall_clock_gettime and __start_context are internal symbols
for Linux/x86-64, mark them with attribute_hidden.
[BZ #18822]
* sysdeps/unix/sysv/linux/x86_64/init-first.c
(__syscall_clock_gettime): Add attribute_hidden.
* sysdeps/unix/sysv/linux/x86_64/makecontext.c
(__start_context): Likewise.
VDSO_SYMBOL(getcpu) is defined as hidden in Linux/x86_64 init-first.c
and unused for Linux/i386.
[BZ #18822]
* sysdeps/unix/sysv/linux/x86/libc-vdso.h (VDSO_SYMBOL(getcpu)):
Add attribute_hidden.
Hide internal __old_glob64 function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/i386/glob64.c (__old_glob64): Add
libc_hidden_proto and libc_hidden_def.
Hide internal __old_readdir64 function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/i386/olddirent.h (__old_readdir64):
Add libc_hidden_proto.
* sysdeps/unix/sysv/linux/i386/readdir64.c (__old_readdir64):
Add libc_hidden_def.
This patch consolidates all the non cancellable openat{64} calls to use
the __openat{64}_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (openat_not_cancel): Remove macro.
(openat_not_cancel_3): Likewise.
(openat64_not_cancel_3): Likewise).
(openat_not_cancel_3): Likewise).
* sysdeps/unix/sysv/linux/not-cancel.h (openat_not_cancel): Remove
macro.
(openat_not_cancel_3): Likewise.
(openat64_not_cancel): Likewise.
(openat64_not_cancel_3): Likewise.
* sysdeps/unix/sysv/linux/openat.c (__openat_nocancel): New function.
* sysdeps/unix/sysv/linux/openat64.c (__openat64_nocancel): Likewise.
* io/ftw.c (open_dir_stream): Replace openat{64}_not_cancel{_3} with
__open{64}_nocancel.
* sysdeps/mach/hurd/opendir.c (__opendirat): Likewise.
* sysdeps/posix/getcwd.c (__getcwd): Likewise.
* sysdeps/posix/opendir.c (__opendirat): Likewise.
This patch consolidates all the non cancellable write calls to use
the __write_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (write_not_cancel): Remove macro.
(__write_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (__write_nocancel):
Rewrite as a function prototype.
(write_not_cancel): Remove macro.
* sysdeps/unix/sysv/linux/write.c (__write_nocancel): New function.
* gmon/gmon.c (ERR): Replace write_not_cancel with __write_nocancel.
(write_gmon): Likewise.
* libio/fileops.c (_IO_new_file_write): Likewise.
* login/utmp_file.c (pututline_file): Likewise.
(updwtmp_file): Likewise.
* stdio-common/psiginfo.c (psiginfo): Likewise.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
* sysdeps/unix/sysv/linux/gethostid.c (sethostid): Likewise.
* sysdeps/unix/sysv/linux/libc_fatal.c (backtrace_and_maps):
Likewise.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np):
Likewise.
This patch consolidates all the non cancellable read calls to use
the __read_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Also, since it is used on libcrypto it is also exported in GLIBC_PRIVATE
namespace.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (read_not_cancel): Remove macro.
(__read_nocancel): New macro.
* sysdeps/unix/sysv/linux/Versions (libc) [GLIBC_PRIVATE]: Add
__read_nocancel.
* sysdeps/unix/sysv/linux/not-cancel.h (__read_nocancel): Remove
macro.
(__read_nocancel): New prototype.
* sysdeps/unix/sysv/linux/read.c (__read_nocancel): New function.
* catgets/open_catalog.c (__open_catalog): Replace read_not_cancel
with __read_nocancel.
* intl/loadmsgcat.c (read): Likewise.
* libio/fileops.c (_IO_file_read): Likewise.
* locale/loadlocale.c (_nl_load_locale): Likewise.
* login/utmp_file.c (getutent_r_file): Likewise.
(internal_getut_r): Likewise.
(getutline_r_file): Likewise.
* sysdeps/unix/sysv/linux/fips-private.h (fips_enable_p): Likewise.
* sysdeps/unix/sysv/linux/gethostid.c (gethostid): Likewise.
* sysdeps/unix/sysv/linux/getloadavg.c (getloadavg): Likewise.
* sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid):
Likewise.
* sysdeps/unix/sysv/linux/getsysstats.c (next_line): Likewise.
* sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system): Likewise.
* sysdeps/unix/sysv/linux/ia64/has_cpuclock.c (has_cpuclock):
Likewise.
* sysdeps/unix/sysv/linux/libc_fatal.c (backtrace_and_maps):
Likewise.
* sysdeps/unix/sysv/linux/malloc-sysdep.h (check_may_shrink_heap):
Likewise.
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np):
Likewise.
* sysdeps/unix/sysv/linux/sysconf.c (__sysconf): Likewise.
XPG4.2 defines the siginfo_t type, but not union sigval or its
contents (which were added in the 1993 edition of POSIX.1), resulting
in namespace violations for sigval, sival_int and sival_ptr for
signal.h and sys/wait.h for that standard because those headers
incorrectly expose those names in that case.
This patch fixes this problem. The public type in this case is union
sigval, but various places in the headers use the sigval_t name for
it; direct uses of union sigval are already properly guarded or in
headers not in XPG4.2. Now, sigval_t, although not a standard name,
does seem to be widely used outside glibc. The approach taken by this
patch is to make installed headers use the name __sigval_t instead.
__sigval_t is then defined to either union sigval or union __sigval
(where union __sigval has __-prefixed member names as well), depending
on whether there are any namespace issues with the union sigval name
and its members. In the case where union __sigval is used, sigval_t
is not defined at all, to avoid the problem of sigval_t having a C++
mangled name that depends on feature test macros. sigval_t is still
defined by signal.h if __USE_MISC (reflecting the nonstandard nature
of that name).
Tested for x86_64.
[BZ #21944]
* signal/bits/types/__sigval_t.h: New file.
* signal/Makefile (headers): Add bits/types/__sigval_t.h.
* signal/bits/types/sigval_t.h: Include <bits/types/__sigval_t.h>
and define sigval_t using __sigval_t.
* include/bits/types/__sigval_t.h: New file.
* bits/types/sigevent_t.h: Include <bits/types/__sigval_t.h>
instead of <bits/types/__sigval_t.h>.
(struct sigevent): Use __sigval_t instead of sigval_t.
* bits/types/siginfo_t.h: Include <bits/types/__sigval_t.h>
instead of <bits/types/__sigval_t.h>.
(siginfo_t): Use __sigval_t instead of sigval_t.
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h: Include
<bits/types/__sigval_t.h> instead of <bits/types/__sigval_t.h>.
(struct sigevent): Use __sigval_t instead of sigval_t.
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h: Include
<bits/types/__sigval_t.h> instead of <bits/types/__sigval_t.h>.
(siginfo_t): Use __sigval_t instead of sigval_t.
* signal/signal.h [__USE_MISC]: Include <bits/types/sigval_t.h>.
Given my patch
<https://gcc.gnu.org/ml/gcc-patches/2017-08/msg00965.html> for the
ICEs building a glibc string function test for SH, the testsuite can
build completely for SH with GCC 7 and mainline. However, there is a
test failure that does not appear for GCC 6: check-localplt fails
because of an abort PLT reference in libc.so.
Given the lack of a trap insn pattern for SH, it seems unavoidable
that the compiler might sometimes generate abort calls, and such abort
calls (generated from __builtin_trap when there is no trap insn
pattern) will be unaffected by the normal mapping to __GI_abort for
calls within glibc. Thus, this patch allows (but does not require) an
abort PLT reference in libc.so for SH.
Tested for sh4-linux-gnu with build-many-glibcs.py (GCC 7, with my
patch applied).
* sysdeps/unix/sysv/linux/sh/localplt.data: Allow abort in
libc.so.
Default semantic for mmap2 syscall is to take the offset in 4096-byte
units. However m68k and ia64 mmap2 implementation take in the
configured pageunit units and for both architecture it can be
different values.
This patch fixes the m68k runtime discover of mmap2 offset unit
and adds the ia64 definition to find it at runtime.
Checked the basic tst-mmap and tst-mmap-offset on m68k (the system
is configured with 4k, so current code is already passing on this
system) and a sanity check on x86_64-linux-gnu (which should not be
affected by this change). Sergei also states that ia64 loader now
work correctly with this change.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Sergei Trofimovich <slyfox@inbox.ru>
* sysdeps/unix/sysv/linux/m68k/mmap_internal.h (MMAP2_PAGE_SHIFT):
Rename to MMAP2_PAGE_UNIT.
* sysdeps/unix/sysv/linux/mmap.c: Include mmap_internal iff
__OFF_T_MATCHES_OFF64_T is not defined.
* sysdeps/unix/sysv/linux/mmap_internal.h (page_unit): Declare as
uint64_t.
(MMAP2_PAGE_UNIT) [MMAP2_PAGE_UNIT == -1]: Redefine to page_unit.
(page_unit) [MMAP2_PAGE_UNIT != -1]: Remove definition.
This commit separates allocating and raising exceptions. This
simplifies catching and re-raising them because it is no longer
necessary to make a temporary, on-stack copy of the exception message.
Remove enum __ptrace_flags along with the only constant it contains,
PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files.
This temporary development constant shouldn't have been added to
sys/ptrace.h in the first place. It was introduced in Linux by commit
v3.1-rc1~308^2~28 as a temporary part of new experimental PTRACE_SEIZE
interface. Later, as PTRACE_SEIZE stabilized and lost its experimental
status, this flag was removed from Linux by commit v3.4-rc1~109^2~20.
* sysdeps/unix/sysv/linux/sys/ptrace.h (enum __ptrace_flags,
PTRACE_SEIZE_DEVEL): Remove.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
The standard members of ucontext_t, in all standard versions with that
type, are uc_link, uc_sigmask, uc_stack and uc_mcontext.
The uc_* namespace is mostly reserved for additions to the structure.
However, in XPG4.2, it's only reserved when <ucontext.h> is included,
not when <signal.h> is included, while <signal.h> is required to
define ucontext_t (but not allowed to make visible other symbols from
<ucontext.h>). Thus, nonstandard members should avoid uc_* names.
Some already do use __uc_*, but others don't; most architectures (all
except ia64, I think) have a member uc_flags and some have additional
members beyond that.
This patch makes nonstandard members have an __ prefix unless
__USE_MISC is defined. Members whose names indicate they are solely
padding / reserved for future use are renamed unconditionally to use
the __glibc_reserved1 naming convention.
This is part of the preparation for a revised version of the
mcontext_t / sigcontext patch to be able to eliminate all 13 of the
miscellaneous XFAILs in conform/Makefile, rather than only 11 of them
as at present (at least one further fix on top of this one will be
needed for that as well).
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (__ctx): Move undefine further down.
(ucontext_t): Use __ctx with uc_flags. Rename uc_filler to
__glibc_reserved1.
* sysdeps/generic/sys/ucontext.h (__ctx): New macro.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/i386/sys/ucontext.h (__ctx): Move undefine further down.
(__ctxt): Likewise.
(ucontext_t): Use __ctx with uc_flags. Rename uc_filler to
__glibc_reserved1.
* sysdeps/m68k/sys/ucontext.h (__ctx): Move undefine further down.
(ucontext_t): Use __ctx with uc_flags. Rename uc_filler to
__glibc_reserved1.
* sysdeps/mips/sys/ucontext.h (__ctx): Move undefine further down.
(ucontext_t): Use __ctx with uc_flags. Rename uc_filler to
__glibc_reserved1.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (__ctx): New
macro.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (__ctx): New macro.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h (__ctx): New macro.
(ucontext_t): Use __ctx with uc_flags and uc_regspace.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (__ctx): New macro.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (__ctx): Move
undefine further down.
(ucontext_t): Use __ctx with uc_flags. Rename uc_filler to
__glibc_reserved1.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (__ctx): Move
undefine further down.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): Move
undefine further down.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t): Use
__ctx with uc_flags, uc_regs_ptr, uc_regs and uc_reg_space.
Rename uc_pad to __glibc_reserved1.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): Move
undefine further down.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (__ctx): Move undefine
further down.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (ucontext_t): Use
__ctx with uc_flags.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h (__ctx): New macro.
(ucontext_t): Use __ctx with uc_flags.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Use
__ctx with uc_flags.
On Linux/i386, there are 3 ways to make a system call:
1. call *%gs:SYSINFO_OFFSET. This requires TLS initialization.
2. call *_dl_sysinfo. This requires relocation of _dl_sysinfo.
3. int $0x80. This is slower than #2 and #3, but works everywhere.
When an object file is compiled with PIC, #1 is prefered since it is
faster than #3 and doesn't require relocation of _dl_sysinfo. For
dynamic executables, ld.so initializes TLS. However, for static
executables, before TLS is initialized by __libc_setup_tls, #3 should
be used for system calls.
This patch adds <startup.h> which defines _startup_fatal and defaults
it to __libc_fatal. It replaces __libc_fatal with _startup_fatal in
static executables where it is called before __libc_setup_tls is called.
This header file is included in all files containing functions which are
called before __libc_setup_tls is called. On Linux/i386, when PIE is
enabled by default, _startup_fatal is turned into ABORT_INSTRUCTION and
I386_USE_SYSENTER is defined to 0 so that "int $0x80" is used for system
calls before __libc_setup_tls is called.
Tested on i686 and x86-64. Without this patch, all statically-linked
tests will fail on i686 when the compiler defaults to -fPIE.
[BZ #21913]
* csu/libc-tls.c: Include <startup.h> first.
(__libc_setup_tls): Call _startup_fatal instead of __libc_fatal.
* elf/dl-tunables.c: Include <startup.h> first.
* include/libc-symbols.h (BUILD_PIE_DEFAULT): New.
* sysdeps/generic/startup.h: New file.
* sysdeps/unix/sysv/linux/i386/startup.h: Likewise.
* sysdeps/unix/sysv/linux/i386/brk.c [BUILD_PIE_DEFAULT != 0]
(I386_USE_SYSENTER): New. Defined to 0.
Different than other architectures hppa-linux-gnu define different values
for ENOTSUP and EOPNOTSUPP, where the later is a Linux specific one.
This leads to tst-preadwritev{64}v2 tests failures:
$ ./testrun.sh misc/tst-preadvwritev2
error: tst-preadvwritev2-common.c:35: preadv2 failure did not set errno to ENOTSUP (223)
error: 1 test failures
The straightforward fix is to return the POSIX defined ENOTSUP on all
p{read,write}v{64}v2 implementations instead of Linux specific one.
Checked on x86_64-linux-gnu and the tst-preadwritev{64}v2 on
hppa-linux-gnu (although due the installed kernel on my testing system
the pwritev{64}v2 with an invalid flag still fails due a known kernel
issue [1]).
[BZ #21780]
* sysdeps/posix/preadv2.c (preadv2): Use ENOTSUP instead of
EOPNOTSUPP.
* sysdeps/posix/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/posix/pwritev2.c (pwritev2): Likewise.
* sysdeps/posix/pwritev64v2.c (pwritev64v2): Likewise.
* sysdeps/unix/sysv/linux/preadv2.c (preadv2): Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg00726.html
