Commit Graph

9684 Commits

Author SHA1 Message Date
Carlos Eduardo Seo
502b91de14 powerpc: make memchr use memchr-power7.
In powerpc64, memchr was always pointing to the internal __GI_memchr
implementation.  This patch fixes that and makes it use the
optimized POWER7 version when adequate.

	* sysdeps/powerpc/powerpc64/multiarch/memchr-ppc64.c: Make
	memchr not point to the internal __GI_memchr implementation.
2015-08-21 17:05:40 -03:00
H.J. Lu
e5dee2c896 Revert "Add INLINE_SYSCALL_RETURN/INLINE_SYSCALL_ERROR_RETURN"
This reverts commit 0c5b8b5941.
2015-08-21 09:57:15 -07:00
H.J. Lu
8c7c251746 Revert "Fix a typo in linux lxstat.c"
This reverts commit e4ad5e722c.
2015-08-21 09:57:02 -07:00
H.J. Lu
e4ad5e722c Fix a typo in linux lxstat.c
* sysdeps/unix/sysv/linux/lxstat.c (__lxstat): Fix a typo.
2015-08-21 08:32:36 -07:00
H.J. Lu
0c5b8b5941 Add INLINE_SYSCALL_RETURN/INLINE_SYSCALL_ERROR_RETURN
For ia32 PIC, the first thing of many syscalls does is to call
__x86.get_pc_thunk.reg to load PC into reg in case there is an error,
which is required for setting errno.  In most cases, there are no
errors.  But we still call __x86.get_pc_thunk.reg.  This patch adds
INLINE_SYSCALL_RETURN and INLINE_SYSCALL_ERROR_RETURN so that i386
can optimize setting errno by branching to the internal __syscall_error
without PLT.

INLINE_SYSCALL_ERROR_RETURN is designed to take the negative error
number returned from the majority of Linux kernels for which negating
is a no-op with INTERNAL_SYSCALL_ERRNO.

With i386 INLINE_SYSCALL_RETURN, INLINE_SYSCALL_ERROR_RETURN and
i386 syscall inlining optimization for GCC 5, for
sysdeps/unix/sysv/linux/fchmodat.c with -O2 -march=i686
-mtune=generic, GCC 5.2 now generates:

<fchmodat>:
   0:	push   %ebx
   1:	mov    0x14(%esp),%eax
   5:	mov    0x8(%esp),%ebx
   9:	mov    0xc(%esp),%ecx
   d:	mov    0x10(%esp),%edx
  11:	test   $0xfffffeff,%eax
  16:	jne    38 <fchmodat+0x38>
  18:	test   $0x1,%ah
  1b:	jne    48 <fchmodat+0x48>
  1d:	mov    $0x132,%eax
  22:	call   *%gs:0x10
  29:	cmp    $0xfffff000,%eax
  2e:	ja     58 <fchmodat+0x58>
  30:	pop    %ebx
  31:	ret
  32:	lea    0x0(%esi),%esi
  38:	pop    %ebx
  39:	mov    $0xffffffea,%eax
  3e:	jmp    3f <fchmodat+0x3f>	3f: R_386_PC32	__syscall_error
  43:	nop
  44:	lea    0x0(%esi,%eiz,1),%esi
  48:	pop    %ebx
  49:	mov    $0xffffffa1,%eax
  4e:	jmp    4f <fchmodat+0x4f>	4f: R_386_PC32	__syscall_error
  53:	nop
  54:	lea    0x0(%esi,%eiz,1),%esi
  58:	pop    %ebx
  59:	jmp    5a <fchmodat+0x5a>	5a: R_386_PC32	__syscall_error

instead of

<fchmodat>:
   0:	sub    $0x8,%esp
   3:	mov    0x18(%esp),%eax
   7:	mov    %ebx,(%esp)
   a:	call   b <fchmodat+0xb>	b: R_386_PC32	__x86.get_pc_thunk.bx
   f:	add    $0x2,%ebx	11: R_386_GOTPC	_GLOBAL_OFFSET_TABLE_
  15:	mov    %edi,0x4(%esp)
  19:	test   $0xfffffeff,%eax
  1e:	jne    70 <fchmodat+0x70>
  20:	test   $0x1,%ah
  23:	jne    88 <fchmodat+0x88>
  25:	mov    0x14(%esp),%edx
  29:	mov    0x10(%esp),%ecx
  2d:	mov    0xc(%esp),%edi
  31:	xchg   %ebx,%edi
  33:	mov    $0x132,%eax
  38:	call   *%gs:0x10
  3f:	xchg   %edi,%ebx
  41:	cmp    $0xfffff000,%eax
  46:	ja     58 <fchmodat+0x58>
  48:	mov    (%esp),%ebx
  4b:	mov    0x4(%esp),%edi
  4f:	add    $0x8,%esp
  52:	ret
  53:	nop
  54:	lea    0x0(%esi,%eiz,1),%esi
  58:	mov    0x0(%ebx),%edx	5a: R_386_TLS_GOTIE	__libc_errno
  5e:	neg    %eax
  60:	mov    %eax,%gs:(%edx)
  63:	mov    $0xffffffff,%eax
  68:	jmp    48 <fchmodat+0x48>
  6a:	lea    0x0(%esi),%esi
  70:	mov    0x0(%ebx),%eax	72: R_386_TLS_GOTIE	__libc_errno
  76:	movl   $0x16,%gs:(%eax)
  7d:	mov    $0xffffffff,%eax
  82:	jmp    48 <fchmodat+0x48>
  84:	lea    0x0(%esi,%eiz,1),%esi
  88:	mov    0x0(%ebx),%eax	8a: R_386_TLS_GOTIE	__libc_errno
  8e:	movl   $0x5f,%gs:(%eax)
  95:	mov    $0xffffffff,%eax
  9a:	jmp    48 <fchmodat+0x48>

	* sysdeps/unix/sysdep.h (INLINE_SYSCALL_RETURN): New.
	(INLINE_SYSCALL_ERROR_RETURN): Likewise.
	* sysdeps/unix/sysv/linux/adjtime.c (ADJTIME): Use
	INLINE_SYSCALL_RETURN and INLINE_SYSCALL_ERROR_RETURN.
	* sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
	* sysdeps/unix/sysv/linux/eventfd.c (eventfd): Likewise.
	* sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise.
	* sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise.
	* sysdeps/unix/sysv/linux/fcntl.c (do_fcntl): Likewise.
	* sysdeps/unix/sysv/linux/fstatfs64.c (__fstatfs64): Likewise.
	* sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Likewise.
	* sysdeps/unix/sysv/linux/futimens.c (futimens): Likewise.
	* sysdeps/unix/sysv/linux/futimes.c (__futimes): Likewise.
	* sysdeps/unix/sysv/linux/futimesat.c (futimesat): Likewise.
	* sysdeps/unix/sysv/linux/fxstat.c (__fxstat): Likewise.
	* sysdeps/unix/sysv/linux/fxstat64.c (___fxstat64): Likewise.
	* sysdeps/unix/sysv/linux/fxstatat.c (__fxstatat): Likewise.
	* sysdeps/unix/sysv/linux/fxstatat64.c (__fxstatat64): Likewise.
	* sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/getpriority.c (__getpriority): Likewise.
	* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Likewise.
	* sysdeps/unix/sysv/linux/llseek.c (__llseek): Likewise.
	* sysdeps/unix/sysv/linux/lutimes.c (lutimes): Likewise.
	* sysdeps/unix/sysv/linux/lxstat.c (__lxstat): Likewise.
	* sysdeps/unix/sysv/linux/lxstat64.c (___lxstat64): Likewise.
	* sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Likewise.
	* sysdeps/unix/sysv/linux/mq_close.c (mq_close): Likewise.
	* sysdeps/unix/sysv/linux/mq_open.c (__mq_open): Likewise.
	* sysdeps/unix/sysv/linux/mq_unlink.c (mq_unlink): Likewise.
	* sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise.
	* sysdeps/unix/sysv/linux/prlimit.c (prlimit): Likewise.
	* sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise.
	* sysdeps/unix/sysv/linux/raise.c (raise): Likewise.
	* sysdeps/unix/sysv/linux/readahead.c (__readahead): Likewise.
	* sysdeps/unix/sysv/linux/reboot.c (reboot): Likewise.
	* sysdeps/unix/sysv/linux/semget.c (semget): Likewise.
	* sysdeps/unix/sysv/linux/semop.c (semop): Likewise.
	* sysdeps/unix/sysv/linux/semtimedop.c (semtimedop): Likewise.
	* sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise.
	* sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise.
	* sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise.
	* sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise.
	* sysdeps/unix/sysv/linux/signalfd.c (signalfd): Likewise.
	* sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise.
	* sysdeps/unix/sysv/linux/sigprocmask.c ( __sigprocmask): Likewise.
	* sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise.
	* sysdeps/unix/sysv/linux/speed.c (cfsetospeed): Likewise.
	* sysdeps/unix/sysv/linux/statfs64.c (__statfs64): Likewise.
	* sysdeps/unix/sysv/linux/sysctl.c (__sysctl): Likewise.
	* sysdeps/unix/sysv/linux/tcsendbrk.c (tcsendbreak): Likewise.
	* sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise.
	* sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun):
	Likewise.
	* sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime):
	Likewise.
	* sysdeps/unix/sysv/linux/timer_settime.c (timer_settime):
	Likewise.
	* sysdeps/unix/sysv/linux/truncate64.c (truncate64): Likewise.
	* sysdeps/unix/sysv/linux/ustat.c (ustat): Likewise.
	* sysdeps/unix/sysv/linux/utimensat.c (utimensat): Likewise.
	* sysdeps/unix/sysv/linux/utimes.c (__utimes): Likewise.
	* sysdeps/unix/sysv/linux/xmknod.c (__xmknod): Likewise.
	* sysdeps/unix/sysv/linux/xmknodat.c (__xmknodat): Likewise.
	* sysdeps/unix/sysv/linux/xstat.c (__xstat): Likewise.
	* sysdeps/unix/sysv/linux/xstat64.c (___xstat64): Likewise.
	* sysdeps/unix/sysv/linux/xstatconv.c (__xstat_conv): Likewise.
	(__xstat64_conv): Likewise.
	(__xstat32_conv): Likewise.
	* sysdeps/unix/sysv/linux/sched_getaffinity.c
	(__sched_getaffinity_new): Add libc_hidden_proto and
	libc_hidden_def.  Use INLINE_SYSCALL_ERROR_RETURN.
2015-08-21 04:46:53 -07:00
H.J. Lu
daa4db69fc Remove the unused IFUNC files
sysdeps/i386/i686/multiarch/strcasestr-c.c became unused after

commit 1818483b15
Author: Andreas Schwab <schwab@suse.de>
Date:   Wed Dec 18 11:53:27 2013 +1000

    Remove use of SSE4.2 functions for strstr on i686

which contains

-sysdep_routines += strcspn-c strpbrk-c strspn-c strstr-c strcasestr-c
+sysdep_routines += strcspn-c strpbrk-c strspn-c

sysdeps/x86_64/multiarch/strcasestr.c became useless after

t 584b18eb4d
Author: Ondřej Bílka <neleai@seznam.cz>
Date:   Sat Dec 14 19:33:56 2013 +0100

    Add strstr with unaligned loads. Fixes bug 12100.

which changes sysdeps/x86_64/multiarch/strcasestr.c to

libc_ifunc (__strcasestr, __strcasestr_sse2);

This patch removes these file.

	* i386/i686/multiarch/strcasestr-c.c: Removed.
	* x86_64/multiarch/strcasestr.c: Likewise.
	* x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
	Remove strcasestr.
2015-08-20 12:47:20 -07:00
Joseph Myers
9173e3c0b4 Fix uninitialized variable use in ldbl-128ibm nearbyintl.
Removing the use of -Wno-uninitialized for math/ shows errors for
ldbl-128ibm:

../sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: In function '__nearbyintl':
../sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c:119:34: error: 'low' may be used uninitialized in this function [-Werror=maybe-uninitialized]
       u.d[1].d = high - u.d[0].d + low;
                                  ^
../sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c:119:23: error: 'high' may be used uninitialized in this function [-Werror=maybe-uninitialized]
       u.d[1].d = high - u.d[0].d + low;
                       ^

These errors are correct: if the high part of the argument is a NaN,
and the low part is nonzero but has absolute value less than 2^52,
those variables can be used uninitialized.  This patch rearranges the
code so that the variables are always initialized with the natural
values, and then possibly modified later, to avoid this uninitialized
use.  (Note that there are still other issues with this code and NaNs
that are not fixed by this patch.)  No bug filed in Bugzilla or
testcase added for the uninitialized use since it wasn't user-visible
with the compiler I tried (that is, I still got a NaN result).

Tested for powerpc.

	* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Always initialize
	variables for high and low parts before possibly modifying them.
2015-08-20 17:28:09 +00:00
H.J. Lu
1ae6c72dc1 Move x86_64 init-arch.h to sysdeps/x86/init-arch.h
Move sysdeps/x86_64/multiarch/init-arch.h to sysdeps/x86/init-arch.h
which can be used for both i386 and x86_64.

	* sysdeps/i386/i686/multiarch/init-arch.h: Removed.
	* sysdeps/unix/sysv/linux/x86/init-arch.h: Likewise.
	* sysdeps/x86_64/cacheinfo.c: Include <init-arch.h> instead
	of "multiarch/init-arch.h".
	* sysdeps/x86_64/multiarch/init-arch.h: Renamed to ...
	* sysdeps/x86/init-arch.h: This.
2015-08-20 04:29:23 -07:00
H.J. Lu
a452ef24d5 Remove x86 init-arch.c
Both files include sysdeps/x86_64/multiarch/init-arch.c which has been
removed.

	* sysdeps/i386/i686/multiarch/init-arch.c: Removed.
	* sysdeps/unix/sysv/linux/x86/init-arch.c: Likewise.
2015-08-20 04:19:59 -07:00
Florian Weimer
cd4e69ed3e nptl: Document crash due to incorrect use of locks 2015-08-20 08:44:37 +02:00
Joseph Myers
948e12a238 Fix csqrt missing underflows (bug 18370).
The csqrt implementations in glibc can miss underflow exceptions when
the real or imaginary part of the result becomes tiny in the course of
scaling down (in particular, multiplication by 0.5) and that scaling
is exact although the relevant part of the mathematical result isn't.
This patch forces the exception in a similar way to previous fixes.

Tested for x86_64 and x86.

	[BZ #18370]
	* math/s_csqrt.c (__csqrt): Force underflow exception for results
	whose real or imaginary part has small absolute value.
	* math/s_csqrtf.c (__csqrtf): Likewise.
	* math/s_csqrtl.c (__csqrtl): Likewise.
	* math/auto-libm-test-in: Add more tests of csqrt.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
2015-08-19 22:42:01 +00:00
Gabriel F. T. Gomes
1747fcda49 PowerPC: Extend Program Priority Register support
This patch adds extra inline functions to change the Program Priority
Register from ISA 2.07.

2015-08-19  Gabriel F. T. Gomes  <gftg@linux.vnet.ibm.com>

	* sysdeps/powerpc/sys/platform/ppc.h (__ppc_set_ppr_med_high,
	__ppc_set_ppr_very_low): New functions.
	* manual/platform.texi: Add documentation about
	__ppc_set_ppr_med_high and __ppc_set_ppr_very_low.
2015-08-19 17:43:26 -03:00
Petar Jovanovic
fa19d5c48a Fix dynamic linker issue with bind-now
Fix the bind-now case when DT_REL and DT_JMPREL sections are separate
and there is a gap between them.

	[BZ #14341]
	* elf/dynamic-link.h (elf_machine_lazy_rel): Properly handle the
	case when there is a gap between DT_REL and DT_JMPREL sections.
	* sysdeps/x86_64/Makefile (tests): Add tst-split-dynreloc.
	(LDFLAGS-tst-split-dynreloc): New.
	(tst-split-dynreloc-ENV): Likewise.
	* sysdeps/x86_64/tst-split-dynreloc.c: New file.
	* sysdeps/x86_64/tst-split-dynreloc.lds: Likewise.
2015-08-19 05:37:01 -07:00
H.J. Lu
33c898d160 Mark __xstatXX_conv as hidden
__xstat_conv, __xstat64_conv and __xstat32_conv are internal to glibc.
They should be marked as hidden so that they can't be called without
PLT.

	[BZ #18822]
	* sysdeps/unix/sysv/linux/xstatconv.h (__xstat_conv): Add
	attribute_hidden.
	(__xstat64_conv): Likewise.
	(__xstat32_conv): Likewise.
2015-08-19 04:41:06 -07:00
H.J. Lu
7e58ab243d Call __setcontext with HIDDEN_JUMPTARGET
i386 __makecontext should call __setcontext with HIDDEN_JUMPTARGET.

	[BZ #18822]
	* sysdeps/unix/sysv/linux/i386/makecontext.S (__makecontext):
	Don't load %ebx when calling __setcontext.  Call __setcontext
	with HIDDEN_JUMPTARGET.
	* sysdeps/unix/sysv/linux/i386/setcontext.S (__setcontext): Add
	libc_hidden_def.
2015-08-19 04:41:01 -07:00
H.J. Lu
3552daa7ac Use x86-64 cacheinfo.c and sysconf.c for x86
Since _dl_x86_cpu_features is always available, we can use x86-64
cacheinfo.c and sysconf.c for both i386 and x86-64.

	* sysdeps/i386/i686/Makefile
	[$(subdir) == string] (sysdep_routines): Moved to ...
	* sysdeps/i386/Makefile: Here.
	* sysdeps/i386/i686/cacheinfo.c: Moved to ...
	* sysdeps/i386/cacheinfo.c: Here.
	* sysdeps/unix/sysv/linux/i386/sysconf.c: Removed.
	* sysdeps/unix/sysv/linux/i386/i686/sysconf.c: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/sysconf.c: Moved to ...
	* sysdeps/unix/sysv/linux/x86/sysconf.c: Here.
2015-08-19 04:27:04 -07:00
H.J. Lu
477fa2c843 Also check __i586__/__i686__ for HAS_I586/HAS_I686
* sysdeps/x86/cpu-features.h (HAS_I586): Defined to 1 if
	__i586__ is defined.
	(HAS_I686): Defined to 1 if __i686__ is defined.
2015-08-19 04:19:58 -07:00
Joseph Myers
87336caeb5 Fix MIPS -Wundef warnings for __mips_isa_rev.
This patch fixes -Wundef warnings relating to __mips_isa_rev being
undefined.

Tested for mips64 (all three ABIs) that there is a clean build and
testsuite run with -Wno-error=undef removed (and my other -Wundef
patches applied).

	* sysdeps/mips/dl-machine.h [__mips_isa_rev < 6]: Change
	conditionals to [!defined __mips_isa_rev || __mips_isa_rev < 6].
	* sysdeps/mips/machine-gmon.h [__mips_isa_rev < 6]: Likewise.
2015-08-18 21:52:22 +00:00
Carlos Eduardo Seo
94ec7e007f powerpc: Add missing hwcap strings.
Some features in hwcap.h do not have matching string descriptors
to be displayed when LD_SHOW_AUXV=1.  This patch fixes the problem.

2015-08-13  Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>

	* sysdeps/powerpc/dl-procinfo.c:
	(_dl_powerpc_cap_flags): Added missing strings for some
	hwcap features.
	* sysdeps/powerpc/dl-procinfo.h: Updated hwcap bit count.
2015-08-18 15:48:43 -03:00
H.J. Lu
1814df5b02 Define HAS_CPUID/HAS_I586/HAS_I686 from -march=
cpuid, i586 and i686 instructions are available if the processor
specified by -march= supports them.  We can use this information
to determine whether those instructions can be used safely.

	* sysdeps/x86/cpu-features.c (init_cpu_features): Check
	whether cpuid is available only if HAS_CPUID is 0.
	* sysdeps/x86/cpu-features.h (HAS_CPUID): New.
	(HAS_I586): Likewise.
	(HAS_I686): Likewise.
2015-08-18 08:00:00 -07:00
Alan Modra
cf42537774 hppa: start.S: rework references to fix PIE TEXTRELs [BZ #18421]
The startup code was not using PIC friendly references leading to TEXTRELs
in every PIE ELF.
2015-08-18 02:37:17 -04:00
Mike Frysinger
352d0eafb6 hppa: timerfd.h: move to common sys/timerfd.h
Use the common sys/timerfd.h to avoid duplication and move the
arch-specific settings into bits/timerfd.h.
2015-08-18 02:37:16 -04:00
Mike Frysinger
55b14dda43 hppa: signalfd.h: move to common sys/signalfd.h
Use the common sys/signalfd.h to avoid duplication and move the
arch-specific settings into bits/signalfd.h.
2015-08-18 02:37:15 -04:00
Mike Frysinger
605021b6b9 hppa: inotify.h: move to common sys/inotify.h
Use the common sys/inotify.h to avoid duplication and move the
arch-specific settings into bits/inotify.h.
2015-08-18 02:37:15 -04:00
Mike Frysinger
4454e161cb hppa: eventfd.h: move to common sys/eventfd.h
Use the common sys/eventfd.h to avoid duplication and move the
arch-specific settings into bits/eventfd.h.
2015-08-18 02:37:14 -04:00
Mike Frysinger
44e01f06a0 hppa: epoll.h: move to common sys/epoll.h
Use the common sys/epoll.h to avoid duplication and move the arch-specific
settings into bits/epoll.h.
2015-08-18 02:37:13 -04:00
Mike Frysinger
d5a77fcafd hppa: sigaction.h: update define export based on __USE_XOPEN2K8
This brings hppa in line with other ports by exporting a few more defines
based on the __USE_XOPEN2K8 define and not just __USE_MISC.
2015-08-18 02:37:04 -04:00
Mike Frysinger
c5bf7f84bf hppa: shm.h: add SHM_EXEC
This brings hppa in line with all the other arches.
2015-08-18 02:36:55 -04:00
Mike Frysinger
8584204806 hppa: drop __ASSUME_LWS_CAS define
We require recent enough kernels for this now, and we've been hardcoding
it to 1, so drop it entirely now.
2015-08-18 02:36:43 -04:00
Mike Frysinger
43329fe139 hppa: assume TLS everywhere
This brings hppa inline with all the other arches and main code where we
require TLS support everywhere.  That means dropping the defines USE_TLS
and USE___THREAD, and dropping the binutils check (since we already have
a version requirement that is new enough).
2015-08-18 02:36:31 -04:00
Andreas Schwab
1e15a853ed Add version set GLIBC_2.19 for linux/powerpc 2015-08-17 16:21:51 +02:00
Paul Pluzhnikov
d5dff793af Fix BZ #18084 -- backtrace (..., 0) dumps core on x86.
Other architectures also had bugs, or did unnecessary work.
2015-08-15 11:42:43 -07:00
Joseph Myers
739babd775 Fix fma spurious underflows (bug 18824).
Various fma implementations have logic that, when computing fma (x, y,
z) where z is large (so care needs taking to avoid internal overflow)
but x * y is small, scale x * y up instead of down to avoid internal
underflows resulting from scaling down.  (In these cases, x * y is
small enough that only its sign actually matters rather than the exact
value.)

The threshold for scaling up instead of down was correct for "if the
unscaled values were multiplied, the low part of the multiplication
could underflow", and the scaling was sufficient to ensure that the
low part of the multiplication did not underflow (given that cases of
very small x * y - less than half the least subnormal - were
previously dealt with).  However, the choice in the functions wasn't
between scaling up or no scaling, but between scaling up and scaling
down (scaling down actually being needed when x * y isn't so small
compared to z and so the exact value does matter).  Thus a larger
threshold is needed to ensure that scaling down doesn't produce values
the multiplication of whose low parts underflows.  This patch
increases the thresholds accordingly.

Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c
removed so that the ldbl-128 version gets tested instead of the
soft-fp one).

	[BZ #18824]
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for
	scaling x * y up instead of down.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
	* math/auto-libm-test-in: Add more tests of fma.
	* math/auto-libm-test-out: Regenerated.
2015-08-14 17:15:06 +00:00
Paul Pluzhnikov
db7f8c8fe0 Regenerated sysdeps/x86_64/fpu/libm-test-ulps with AVX2. 2015-08-14 09:59:04 -07:00
Siddhesh Poyarekar
37dd6a19ca Remove incorrect register mov in floorf/nearbyint on x86_64
The change in 0b5395f052 replaced calls
to __get_cpu_features@plt followed by a mov from rax to rdx, with a
single macro LOAD_RTLD_GLOBAL_RO_RDX.  It is pretty clear that there
was a typo in s_floorf and __nearbyint due to which the (now incorrect)
mov was not removed.  This patch removes that mov.

	* sysdeps/x86_64/fpu/multiarch/s_floorf.S (__floorf): Remove
	unnecessary movq.
	* sysdeps/x86_64/fpu/multiarch/s_nearbyint.S (__nearbyint):
	Likewise.
2015-08-14 05:30:17 -07:00
Joseph Myers
3ba0ac10fa Add more random libm-test inputs.
This patch adds more test inputs to various libm functions found
through random generation to have larger ulps errors than previously
listed in libm-test-ulp, on at least one of x86_64 and x86.

Tested for x86_64 and x86.

	* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
	asinh, atan, atan2, atanh, cabs, cbrt, cosh, csqrt, erf, erfc,
	exp, exp2, lgamma, log, log1p, log2, pow, sin, sincos, tan, tanh
	and tgamma.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2015-08-13 23:23:23 +00:00
Joseph Myers
37d83a089d Fix tanh missing underflows (bug 16520).
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact.  This patch forces the exception in a
similar way to previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16520]
	* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
	(__tanh): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
	(__tanhf): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
	(__tanhl): Force underflow exception for arguments with small
	absolute value.
	* math/auto-libm-test-in: Add more tests of tanh.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
2015-08-13 16:40:39 +00:00
H.J. Lu
a5cf909b8f Check if cpuid is available in init_cpu_features
Since not all i486 processors support cpuid, we call __get_cpuid_max to
check if cpuid is available before using it if not compiling for i586,
i686 nor x86-64.

	* sysdeps/x86/cpu-features.c (init_cpu_features): Call
	__get_cpuid_max if not compiling for i586, i686 nor x86-64.
2015-08-13 04:53:03 -07:00
H.J. Lu
e54388bd8b Don't include <cpuid.h> in elision-conf.h
Don't include the unused <cpuid.h> in Linux/x86 elision-conf.h.

	* sysdeps/unix/sysv/linux/x86/elision-conf.h: Don't include
	<cpuid.h>.
2015-08-13 03:46:26 -07:00
H.J. Lu
b376899d27 Update x86 elision-conf.c for <cpu-features.h>
This patch updates x86 elision-conf.c to use the newly defined
HAS_CPU_FEATURE from <cpu-features.h>.

	* sysdeps/unix/sysv/linux/x86/elision-conf.c (elision_init):
	Replace HAS_RTM with HAS_CPU_FEATURE (RTM).
2015-08-13 03:41:59 -07:00
H.J. Lu
1dfa4a94ae Update libmvec multiarch functions for <cpu-features.h>
This patch updates libmvec multiarch functions to use the newly defined
HAS_CPU_FEATURE, HAS_ARCH_FEATURE and LOAD_RTLD_GLOBAL_RO_RDX from
<cpu-features.h>.

	* math/Makefile ($(addprefix $(objpfx), $(libm-vec-tests))):
	Remove $(objpfx)init-arch.o.
	* sysdeps/x86_64/fpu/Makefile (libmvec-support): Remove
	init-arch.
	* sysdeps/x86_64/fpu/math-tests-arch.h (avx_usable): Removed.
	(INIT_ARCH_EXT): Defined as empty.
	(CHECK_ARCH_EXT): Replace HAS_XXX with HAS_ARCH_FEATURE (XXX).
	* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core.S: Remove
	__init_cpu_features call.  Replace HAS_XXX with
	HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
	* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_exp2_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_exp4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_exp8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_log2_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_log4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_log8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_pow2_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_pow4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_pow8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sin2_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sin4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sincos2_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sincos4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_cosf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_cosf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_cosf8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_expf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_expf8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_logf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_logf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_logf8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_powf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_powf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_powf8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf8_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sinf16_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sinf4_core.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/svml_s_sinf8_core.S: Likewise.
2015-08-13 03:41:47 -07:00
H.J. Lu
1aee37a22e Update i686 multiarch functions for <cpu-features.h>
This patch updates i686 multiarch functions to use the newly defined
HAS_CPU_FEATURE, HAS_ARCH_FEATURE, LOAD_GOT_AND_RTLD_GLOBAL_RO and
LOAD_FUNC_GOT_EAX from <cpu-features.h>.

	* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Replace HAS_XXX
	with HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
	* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Likewise.
	* sysdeps/i386/i686/multiarch/ifunc-impl-list.c: Likewise.
	* sysdeps/i386/i686/multiarch/s_fma.c: Likewise.
	* sysdeps/i386/i686/multiarch/s_fmaf.c: Likewise.
	* sysdeps/i386/i686/multiarch/bcopy.S: Remove __init_cpu_features
	call.  Merge SHARED and !SHARED.  Add LOAD_GOT_AND_RTLD_GLOBAL_RO.
	Use LOAD_FUNC_GOT_EAX to load function address.  Replace HAS_XXX
	with HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
	* sysdeps/i386/i686/multiarch/bzero.S: Likewise.
	* sysdeps/i386/i686/multiarch/memchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/memmove.S: Likewise.
	* sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/mempcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/memrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcasecmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcat.S: Likewise.
	* sysdeps/i386/i686/multiarch/strchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcspn.S: Likewise.
	* sysdeps/i386/i686/multiarch/strlen.S: Likewise.
	* sysdeps/i386/i686/multiarch/strncase.S: Likewise.
	* sysdeps/i386/i686/multiarch/strnlen.S: Likewise.
	* sysdeps/i386/i686/multiarch/strrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strspn.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcschr.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcslen.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise.
2015-08-13 03:41:37 -07:00
H.J. Lu
0b5395f052 Update x86_64 multiarch functions for <cpu-features.h>
This patch updates x86_64 multiarch functions to use the newly defined
HAS_CPU_FEATURE, HAS_ARCH_FEATURE and LOAD_RTLD_GLOBAL_RO_RDX from
<cpu-features.h>.

	* sysdeps/x86_64/fpu/multiarch/e_asin.c: Replace HAS_XXX with
	HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
	* sysdeps/x86_64/fpu/multiarch/e_atan2.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_log.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_pow.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_atan.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_fmaf.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_sin.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_tan.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_ceil.S: Use
	LOAD_RTLD_GLOBAL_RO_RDX and HAS_CPU_FEATURE (SSE4_1).
	* sysdeps/x86_64/fpu/multiarch/s_ceilf.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_floor.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_floorf.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_nearbyint.S : Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_nearbyintf.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_rintf.S: Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_rintf.S : Likewise.
	* sysdeps/x86_64/multiarch/ifunc-impl-list.c: Likewise.
	* sysdeps/x86_64/multiarch/sched_cpucount.c: Likewise.
	* sysdeps/x86_64/multiarch/strstr.c: Likewise.
	* sysdeps/x86_64/multiarch/memmove.c: Likewise.
	* sysdeps/x86_64/multiarch/memmove_chk.c: Likewise.
	* sysdeps/x86_64/multiarch/test-multiarch.c: Likewise.
	* sysdeps/x86_64/multiarch/memcmp.S: Remove __init_cpu_features
	call.  Add LOAD_RTLD_GLOBAL_RO_RDX.  Replace HAS_XXX with
	HAS_CPU_FEATURE/HAS_ARCH_FEATURE (XXX).
	* sysdeps/x86_64/multiarch/memcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/memset.S: Likewise.
	* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/strcat.S: Likewise.
	* sysdeps/x86_64/multiarch/strchr.S: Likewise.
	* sysdeps/x86_64/multiarch/strcmp.S: Likewise.
	* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/strcspn.S: Likewise.
	* sysdeps/x86_64/multiarch/strspn.S: Likewise.
	* sysdeps/x86_64/multiarch/wcscpy.S: Likewise.
	* sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
2015-08-13 03:41:30 -07:00
H.J. Lu
e2e4f56056 Add _dl_x86_cpu_features to rtld_global
This patch adds _dl_x86_cpu_features to rtld_global in x86 ld.so
and initializes it early before __libc_start_main is called so that
cpu_features is always available when it is used and we can avoid
calling __init_cpu_features in IFUNC selectors.

	* sysdeps/i386/dl-machine.h: Include <cpu-features.c>.
	(dl_platform_init): Call init_cpu_features.
	* sysdeps/i386/dl-procinfo.c (_dl_x86_cpu_features): New.
	* sysdeps/i386/i686/cacheinfo.c
	(DISABLE_PREFERRED_MEMORY_INSTRUCTION): Removed.
	* sysdeps/i386/i686/multiarch/Makefile (aux): Remove init-arch.
	* sysdeps/i386/i686/multiarch/Versions: Removed.
	* sysdeps/i386/i686/multiarch/ifunc-defines.sym (KIND_OFFSET):
	Removed.
	* sysdeps/i386/ldsodefs.h: Include <cpu-features.h>.
	* sysdeps/unix/sysv/linux/x86/Makefile
	(libpthread-sysdep_routines): Remove init-arch.
	* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Include
	<sysdeps/x86_64/dl-procinfo.c> instead of
	sysdeps/generic/dl-procinfo.c>.
	* sysdeps/x86/Makefile [$(subdir) == csu] (gen-as-const-headers):
	Add cpu-features-offsets.sym and rtld-global-offsets.sym.
	[$(subdir) == elf] (sysdep-dl-routines): Add dl-get-cpu-features.
	[$(subdir) == elf] (tests): Add tst-get-cpu-features.
	[$(subdir) == elf] (tests-static): Add
	tst-get-cpu-features-static.
	* sysdeps/x86/Versions: New file.
	* sysdeps/x86/cpu-features-offsets.sym: Likewise.
	* sysdeps/x86/cpu-features.c: Likewise.
	* sysdeps/x86/cpu-features.h: Likewise.
	* sysdeps/x86/dl-get-cpu-features.c: Likewise.
	* sysdeps/x86/libc-start.c: Likewise.
	* sysdeps/x86/rtld-global-offsets.sym: Likewise.
	* sysdeps/x86/tst-get-cpu-features-static.c: Likewise.
	* sysdeps/x86/tst-get-cpu-features.c: Likewise.
	* sysdeps/x86_64/dl-procinfo.c: Likewise.
	* sysdeps/x86_64/cacheinfo.c (__cpuid_count): Removed.
	Assume USE_MULTIARCH is defined and don't check it.
	(is_intel): Replace __cpu_features with GLRO(dl_x86_cpu_features).
	(is_amd): Likewise.
	(max_cpuid): Likewise.
	(intel_check_word): Likewise.
	(__cache_sysconf): Don't call __init_cpu_features.
	(__x86_preferred_memory_instruction): Removed.
	(init_cacheinfo): Don't call __init_cpu_features. Replace
	__cpu_features with GLRO(dl_x86_cpu_features).
	* sysdeps/x86_64/dl-machine.h: <cpu-features.c>.
	(dl_platform_init): Call init_cpu_features.
	* sysdeps/x86_64/ldsodefs.h: Include <cpu-features.h>.
	* sysdeps/x86_64/multiarch/Makefile (aux): Remove init-arch.
	* sysdeps/x86_64/multiarch/Versions: Removed.
	* sysdeps/x86_64/multiarch/cacheinfo.c: Likewise.
	* sysdeps/x86_64/multiarch/init-arch.c: Likewise.
	* sysdeps/x86_64/multiarch/ifunc-defines.sym (KIND_OFFSET):
	Removed.
	* sysdeps/x86_64/multiarch/init-arch.h: Rewrite.
2015-08-13 03:41:22 -07:00
Paul Pluzhnikov
84895dca70 Fix BZ #18086 -- nice resets errno to 0. 2015-08-11 23:40:00 -07:00
Ondrej Bilka
5011051da3 powerpc: Fix stpcpy performance for power8
This patch fixes the missing enablement for stpcpy on POWER8.

	* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Fix ifunc.
2015-08-11 10:03:10 -03:00
Adhemerval Zanella
6f714aa4ad powerpc: Fix PPC64/POWER7 conform tests
When building with --disable-multi-arch the memmove and strstr POWER7
optimization create and uses symbols that conflict with expect conform
tests.

	* sysdeps/powerpc/powerpc64/power7/memmove.S (bcopy): Changing to
	__bcopy and add a weak_alias to bcopy.
	* sysdeps/powerpc/powerpc64/power7/strstr.S (strstr): Use __strnlen
	for static build.
2015-08-11 10:03:10 -03:00
Adhemerval Zanella
142e0a9953 powerpc: Use default strcpy optimization for POWER7
This patches uses the default strcpy/stpcpy implementation for
POWER7/PPC64.  This is faster in mostly inputs for benchtests
and for multiarch the implementation uses the POWER7 strlen and
memcpy.

	* string/stpcpy.c (__stpcpy): Use STPCPY to redefine symbol name and
	cleanup macro usage.
	* string/strcpy.c (strcpt): Use STRCPY to redefine symbol name.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.S: Remove file.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/power7/stpcpy.S: Likewise.
	* sysdeps/powerpc/powerpc64/power7/strcpy.S: Likewise.
	* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/stpcpy.S: Likewise.
	* sysdeps/powerpc/powerpc64/strcpy.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
	[SHARED && IS_IN (libc)]: Include <string/strcpy.c>.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
	[SHARED && IS_IN (libc)]: Include <string/stpcpy.c>.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.c: New file.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
2015-08-11 10:03:10 -03:00
Adhemerval Zanella
14362ef154 powerpc: Fix strnlen/power7 build
This patch fixes the strnlen.S build with --disable-multi-arch option.
2015-08-11 10:03:09 -03:00
Adhemerval Zanella
357bb400f1 powerpc: Fix strstr/power7 build
This patch fixes the strstr build with --disable-multi-arch option.
The optimization calls the __strstr_ppc symbol, which always build
for multiarch config but not if it is disable.  This patch fixes it
by adding the default C implementation object with the expected
symbol name.

	* sysdeps/powerpc/powerpc64/power7/Makefile [$(subdir) = string]
	(sysdep_routines): Add strstr-ppc64.
	* sysdeps/powerpc/powerpc64/power7/strstr-ppc64.c: New file.
2015-08-11 10:03:09 -03:00