Commit Graph

177 Commits

Author SHA1 Message Date
Florian Weimer
71d4fe94a1 time: Set daylight to 1 for matching DST/offset change (bug 29951)
The daylight variable is supposed to be set to 1 if DST is ever in
use for the current time zone.  But __tzfile_read used to do this:

  __daylight = rule_stdoff != rule_dstoff;

This check can fail to set __daylight to 1 if the DST and non-DST
offsets happen to be the same.

(cherry picked from commit 35141f304e)
2023-01-10 17:36:15 +01:00
Hans-Peter Nilsson
d5ba02f67d timezone: test-case for BZ #28707
This test-case is the tzfile for Asuncion generated by
tzlib-2021e as follows, using the tzlib-2021e zic: "zic -d
DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica".  Note that in its type 2 header, it
has two entries in its "time-types" array (types), but only
one entry in its "transition types" array (type_idxs).

	* timezone/Makefile, timezone/tst-pr28707.c,
	timezone/testdata/gen-XT5.sh: New test.

Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
(cherry picked from commit ebe899af0d)
2022-01-07 10:21:11 +01:00
Romain GEISSLER
5188a9d026 Remove all usage of @BASH@ or ${BASH} in installed files, and hardcode /bin/bash instead
(FYI, this is a repost of
https://sourceware.org/pipermail/libc-alpha/2019-July/105035.html now
that FSF papers have been signed and confirmed on FSF side).

This trivial patch attemps to fix BZ 24106. Basically the bash locally
used when building glibc on the host shall not leak on the installed
glibc, as the system where it is installed might be different and use
another bash location.

So I have looked for all occurences of @BASH@ or $(BASH) in installed
files, and replaced it by /bin/bash. This was suggested by Florian
Weimer in the bug report.

Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2021-05-12 07:47:11 +05:30
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Prasanth R
b4f020c9b4 timezone: Change zdump installation to bin directory
Commit 3bc4186c7a9, tzdata changed the zdump installation
to bin directory, which creates duplicates of zdump in the
Root filesystem.
2020-11-25 15:52:50 +01:00
Paul Eggert
61d64408a1 Update timezone code from tzcode 2020a
This patch updates files coming from tzcode to tzcode 2020a.
This is mostly for better support for Internet RFC 8536, by adding
support to zic for the Expires line (new to tzcode 2020a), the -b
option (new to 2019b) and the -r option (new to 2019a).
One trivial change to other glibc was needed.
* time/tzfile.c (__tzfile_read): Adjust to tzcode private.h renaming.
* timezone/private.h, timezone/tzfile.h, timezone/version:
* timezone/zdump.c, timezone/zic.c: Update from tzcode 2020a.
2020-05-15 09:19:27 -07:00
Paul Eggert
e1195b207c Update timezone/README
* timezone/version: New file, also taken from tzcode2018i.
* timezone/README: Reword so that people needn't paw through
old ChangeLog files to see which version we're using, a process
that is error-prone.  Update an obsolescent URL.
2020-01-09 23:00:25 -08:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers
e740e5b1f0 Update timezone code from tzcode 2018i.
This patch updates files coming from tzcode to the versions in tzcode
2018i.  No changes elsewhere in glibc were needed.

Tested for x86_64.

	* timezone/zdump.c: Update from tzcode 2018i.
	* timezone/zic.c: Likewise.
2018-12-31 23:51:15 +00:00
Joseph Myers
0afcb29d50 Update timezone code from tzcode 2018g.
This patch updates files coming from tzcode to the versions in tzcode
2018g.  No changes elsewhere in glibc were needed.

Tested for x86_64.

	* timezone/private.h: Update from tzcode 2018g.
	* timezone/tzfile.h: Likewise.
	* timezone/tzselect.ksh: Likewise.
	* timezone/zdump.c: Likewise.
	* timezone/zic.c: Likewise.
2018-12-10 13:11:58 +00:00
Andreas Schwab
ce5a7de6cd Don't reduce test timeout to less than default
This removes all overrides of TIMEOUT that are less than or equal to the
default timeout.
2018-10-17 09:34:13 +02:00
Florian Weimer
aa42b3dbcb Avoid running some tests if the file system does not support holes
Otherwise, these tests fills up the entire disk (or just run very
slowly and eventually time out).
2018-08-21 12:56:53 +02:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
H.J. Lu
36975e8e7e Replace = with += in CFLAGS-xxx.c/CPPFLAGS-xxx.c
Replace = with += in CFLAGS-xxx.c and CPPFLAGS-xxx.c to allow Makefile
under sysdeps to define CFLAGS-xx.c and CPPFLAGS-xxx.c.

	* argp/Makefile (CFLAGS-argp-help.c): Replace = with +=.
	(CFLAGS-argp-parse.c): Likewise.
	(CFLAGS-argp-fmtstream.c): Likewise.
	* crypt/Makefile (CPPFLAGS-sha256-crypt.c): Likewise.
	(CPPFLAGS-sha512-crypt.c): Likewise.
	(CPPFLAGS-md5-crypt.c): Likewise.
	* debug/Makefile (CFLAGS-stack_chk_fail.c): Likewise.
	(CFLAGS-stack_chk_fail_local.c): Likewise.
	(CFLAGS-backtrace.c): Likewise.
	(CFLAGS-sprintf_chk.c): Likewise.
	(CFLAGS-snprintf_chk.c): Likewise.
	(CFLAGS-vsprintf_chk.c): Likewise.
	(CFLAGS-vsnprintf_chk.c): Likewise.
	(CFLAGS-asprintf_chk.c): Likewise.
	(CFLAGS-vasprintf_chk.c): Likewise.
	(CFLAGS-obprintf_chk.c): Likewise.
	(CFLAGS-dprintf_chk.c): Likewise.
	(CFLAGS-vdprintf_chk.c): Likewise.
	(CFLAGS-printf_chk.c): Likewise.
	(CFLAGS-fprintf_chk.c): Likewise.
	(CFLAGS-vprintf_chk.c): Likewise.
	(CFLAGS-vfprintf_chk.c): Likewise.
	(CFLAGS-gets_chk.c): Likewise.
	(CFLAGS-fgets_chk.c): Likewise.
	(CFLAGS-fgets_u_chk.c): Likewise.
	(CFLAGS-fread_chk.c): Likewise.
	(CFLAGS-fread_u_chk.c): Likewise.
	(CFLAGS-swprintf_chk.c): Likewise.
	(CFLAGS-vswprintf_chk.c): Likewise.
	(CFLAGS-wprintf_chk.c): Likewise.
	(CFLAGS-fwprintf_chk.c): Likewise.
	(CFLAGS-vwprintf_chk.c): Likewise.
	(CFLAGS-vfwprintf_chk.c): Likewise.
	(CFLAGS-fgetws_chk.c): Likewise.
	(CFLAGS-fgetws_u_chk.c): Likewise.
	(CFLAGS-read_chk.c): Likewise.
	(CFLAGS-pread_chk.c): Likewise.
	(CFLAGS-pread64_chk.c): Likewise.
	(CFLAGS-recv_chk.c): Likewise.
	(CFLAGS-recvfrom_chk.c): Likewise.
	(CFLAGS-tst-longjmp_chk.c): Likewise.
	(CPPFLAGS-tst-longjmp_chk.c): Likewise.
	(CFLAGS-tst-longjmp_chk2.c): Likewise.
	(CPPFLAGS-tst-longjmp_chk2.c): Likewise.
	(CFLAGS-tst-longjmp_chk3.c): Likewise.
	(CPPFLAGS-tst-longjmp_chk3.c): Likewise.
	(CFLAGS-tst-chk1.c): Likewise.
	(CFLAGS-tst-chk2.c): Likewise.
	(CFLAGS-tst-chk3.c): Likewise.
	(CFLAGS-tst-chk4.cc): Likewise.
	(CFLAGS-tst-chk5.cc): Likewise.
	(CFLAGS-tst-chk6.cc): Likewise.
	(CFLAGS-tst-lfschk1.c): Likewise.
	(CFLAGS-tst-lfschk2.c): Likewise.
	(CFLAGS-tst-lfschk3.c): Likewise.
	(CFLAGS-tst-lfschk4.cc): Likewise.
	(CFLAGS-tst-lfschk5.cc): Likewise.
	(CFLAGS-tst-lfschk6.cc): Likewise.
	(CFLAGS-tst-ssp-1.c): Likewise.
	* dirent/Makefile (CFLAGS-scandir.c): Likewise.
	(CFLAGS-scandir64.c): Likewise.
	(CFLAGS-scandir-tail.c): Likewise.
	(CFLAGS-scandir64-tail.c): Likewise.
	* elf/Makefile (CPPFLAGS-dl-tunables.c): Likewise.
	(CFLAGS-dl-tunables.c): Likewise.
	(CFLAGS-dl-runtime.c): Likewise.
	(CFLAGS-dl-lookup.c): Likewise.
	(CFLAGS-dl-iterate-phdr.c): Likewise.
	(CFLAGS-vismain.c): Likewise.
	(CFLAGS-tst-linkall-static.c): Likewise.
	(CFLAGS-tst-linkall-static.c): Likewise.
	(CPPFLAGS-dl-load.c): Likewise.
	(CFLAGS-ldconfig.c): Likewise.
	(CFLAGS-dl-cache.c): Likewise.
	(CFLAGS-cache.c): Likewise.
	(CFLAGS-rtld.c): Likewise.
	(CFLAGS-multiload.c): Likewise.
	(CFLAGS-filtmod1.c): Likewise.
	(CFLAGS-tst-align.c): Likewise.
	(CFLAGS-tst-align2.c): Likewise.
	(CFLAGS-tst-alignmod.c): Likewise.
	(CFLAGS-tst-alignmod2.c): Likewise.
	(CPPFLAGS-tst-execstack.c): Likewise.
	(CFLAGS-tst-ptrguard1-static.c): Likewise.
	(CFLAGS-tst-latepthreadmod.c): Likewise.
	* grp/Makefile (CFLAGS-getgrgid_r.c): Likewise.
	(CFLAGS-getgrnam_r.c): Likewise.
	(CFLAGS-getgrent_r.c): Likewise.
	(CFLAGS-getgrent.c): Likewise.
	(CFLAGS-fgetgrent.c): Likewise.
	(CFLAGS-fgetgrent_r.c): Likewise.
	(CFLAGS-putgrent.c): Likewise.
	(CFLAGS-initgroups.c): Likewise.
	(CFLAGS-getgrgid.c): Likewise.
	* gshadow/Makefile (CFLAGS-getsgent_r.c): Likewise.
	(CFLAGS-getsgent.c): Likewise.
	(CFLAGS-fgetsgent.c): Likewise.
	(CFLAGS-fgetsgent_r.c): Likewise.
	(CFLAGS-putsgent.c): Likewise.
	(CFLAGS-getsgnam.c): Likewise.
	(CFLAGS-getsgnam_r.c): Likewise.
	* iconv/Makefile (CFLAGS-iconv_prog.c): Likewise.
	(CFLAGS-iconv_charmap.c): Likewise.
	(CFLAGS-dummy-repertoire.c): Likewise.
	(CFLAGS-charmap.c): Likewise.
	(CFLAGS-linereader.c): Likewise.
	(CFLAGS-simple-hash.c): Likewise.
	(CFLAGS-gconv_conf.c): Likewise.
	(CFLAGS-iconvconfig.c): Likewise.
	* inet/Makefile (CFLAGS-gethstbyad_r.c): Likewise.
	(CFLAGS-gethstbyad.c): Likewise.
	(CFLAGS-gethstbynm_r.c): Likewise.
	(CFLAGS-gethstbynm.c): Likewise.
	(CFLAGS-gethstbynm2_r.c): Likewise.
	(CFLAGS-gethstbynm2.c): Likewise.
	(CFLAGS-gethstent_r.c): Likewise.
	(CFLAGS-gethstent.c): Likewise.
	(CFLAGS-rcmd.c): Likewise.
	(CFLAGS-getnetbynm_r.c): Likewise.
	(CFLAGS-getnetbynm.c): Likewise.
	(CFLAGS-getnetbyad_r.c): Likewise.
	(CFLAGS-getnetbyad.c): Likewise.
	(CFLAGS-getnetent_r.c): Likewise.
	(CFLAGS-getnetent.c): Likewise.
	(CFLAGS-getaliasent_r.c): Likewise.
	(CFLAGS-getaliasent.c): Likewise.
	(CFLAGS-getrpcent_r.c): Likewise.
	(CFLAGS-getrpcent.c): Likewise.
	(CFLAGS-getservent_r.c): Likewise.
	(CFLAGS-getservent.c): Likewise.
	(CFLAGS-getprtent_r.c): Likewise.
	(CFLAGS-getprtent.c): Likewise.
	(CFLAGS-either_ntoh.c): Likewise.
	(CFLAGS-either_hton.c): Likewise.
	(CFLAGS-getnetgrent.c): Likewise.
	(CFLAGS-getnetgrent_r.c): Likewise.
	(CFLAGS-tst-checks-posix.c): Likewise.
	(CFLAGS-tst-sockaddr.c): Likewise.
	* intl/Makefile (CFLAGS-tst-gettext.c): Likewise.
	(CFLAGS-tst-translit.c): Likewise.
	(CFLAGS-tst-gettext2.c): Likewise.
	(CFLAGS-tst-codeset.c): Likewise.
	(CFLAGS-tst-gettext3.c): Likewise.
	(CFLAGS-tst-gettext4.c): Likewise.
	(CFLAGS-tst-gettext5.c): Likewise.
	(CFLAGS-tst-gettext6.c): Likewise.
	* io/Makefile (CFLAGS-open.c): Likewise.
	(CFLAGS-open64.c): Likewise.
	(CFLAGS-creat.c): Likewise.
	(CFLAGS-creat64.c): Likewise.
	(CFLAGS-fcntl.c): Likewise.
	(CFLAGS-poll.c): Likewise.
	(CFLAGS-ppoll.c): Likewise.
	(CFLAGS-lockf.c): Likewise.
	(CFLAGS-statfs.c): Likewise.
	(CFLAGS-fstatfs.c): Likewise.
	(CFLAGS-statvfs.c): Likewise.
	(CFLAGS-fstatvfs.c): Likewise.
	(CFLAGS-fts.c): Likewise.
	(CFLAGS-fts64.c): Likewise.
	(CFLAGS-ftw.c): Likewise.
	(CFLAGS-ftw64.c): Likewise.
	(CFLAGS-lockf.c): Likewise.
	(CFLAGS-posix_fallocate.c): Likewise.
	(CFLAGS-posix_fallocate64.c): Likewise.
	(CFLAGS-fallocate.c): Likewise.
	(CFLAGS-fallocate64.c): Likewise.
	(CFLAGS-read.c): Likewise.
	(CFLAGS-write.c): Likewise.
	(CFLAGS-test-stat.c): Likewise.
	(CFLAGS-test-lfs.c): Likewise.
	* libio/Makefile (CFLAGS-fileops.c): Likewise.
	(CFLAGS-fputc.c): Likewise.
	(CFLAGS-fputwc.c): Likewise.
	(CFLAGS-freopen64.c): Likewise.
	(CFLAGS-freopen.c): Likewise.
	(CFLAGS-fseek.c): Likewise.
	(CFLAGS-fseeko64.c): Likewise.
	(CFLAGS-fseeko.c): Likewise.
	(CFLAGS-ftello64.c): Likewise.
	(CFLAGS-ftello.c): Likewise.
	(CFLAGS-fwide.c): Likewise.
	(CFLAGS-genops.c): Likewise.
	(CFLAGS-getc.c): Likewise.
	(CFLAGS-getchar.c): Likewise.
	(CFLAGS-getwc.c): Likewise.
	(CFLAGS-getwchar.c): Likewise.
	(CFLAGS-iofclose.c): Likewise.
	(CFLAGS-iofflush.c): Likewise.
	(CFLAGS-iofgetpos64.c): Likewise.
	(CFLAGS-iofgetpos.c): Likewise.
	(CFLAGS-iofgets.c): Likewise.
	(CFLAGS-iofgetws.c): Likewise.
	(CFLAGS-iofputs.c): Likewise.
	(CFLAGS-iofputws.c): Likewise.
	(CFLAGS-iofread.c): Likewise.
	(CFLAGS-iofsetpos64.c): Likewise.
	(CFLAGS-iofsetpos.c): Likewise.
	(CFLAGS-ioftell.c): Likewise.
	(CFLAGS-iofwrite.c): Likewise.
	(CFLAGS-iogetdelim.c): Likewise.
	(CFLAGS-iogetline.c): Likewise.
	(CFLAGS-iogets.c): Likewise.
	(CFLAGS-iogetwline.c): Likewise.
	(CFLAGS-ioputs.c): Likewise.
	(CFLAGS-ioseekoff.c): Likewise.
	(CFLAGS-ioseekpos.c): Likewise.
	(CFLAGS-iosetbuffer.c): Likewise.
	(CFLAGS-iosetvbuf.c): Likewise.
	(CFLAGS-ioungetc.c): Likewise.
	(CFLAGS-ioungetwc.c): Likewise.
	(CFLAGS-oldfileops.c): Likewise.
	(CFLAGS-oldiofclose.c): Likewise.
	(CFLAGS-oldiofgetpos64.c): Likewise.
	(CFLAGS-oldiofgetpos.c): Likewise.
	(CFLAGS-oldiofsetpos64.c): Likewise.
	(CFLAGS-oldiofsetpos.c): Likewise.
	(CFLAGS-peekc.c): Likewise.
	(CFLAGS-putc.c): Likewise.
	(CFLAGS-putchar.c): Likewise.
	(CFLAGS-putwc.c): Likewise.
	(CFLAGS-putwchar.c): Likewise.
	(CFLAGS-rewind.c): Likewise.
	(CFLAGS-wfileops.c): Likewise.
	(CFLAGS-wgenops.c): Likewise.
	(CFLAGS-oldiofopen.c): Likewise.
	(CFLAGS-iofopen.c): Likewise.
	(CFLAGS-iofopen64.c): Likewise.
	(CFLAGS-oldtmpfile.c): Likewise.
	(CFLAGS-tst_putwc.c): Likewise.
	* locale/Makefile (CFLAGS-md5.c): Likewise.
	(CFLAGS-charmap.c): Likewise.
	(CFLAGS-locfile.c): Likewise.
	(CFLAGS-charmap-dir.c): Likewise.
	* login/Makefile (CFLAGS-grantpt.c): Likewise.
	(CFLAGS-getpt.c): Likewise.
	(CFLAGS-pt_chown.c): Likewise.
	* malloc/Makefile (CFLAGS-mcheck-init.c): Likewise.
	(CFLAGS-obstack.c): Likewise.
	* math/Makefile (CFLAGS-test-tgmath3.c): Likewise.
	(CFLAGS-test-double-vlen4-wrappers.c): Likewise.
	(CFLAGS-test-double-vlen8-wrappers.c): Likewise.
	(CFLAGS-test-float-vlen8-wrappers.c): Likewise.
	(CFLAGS-test-float-vlen16-wrappers.c): Likewise.
	(CFLAGS-test-tgmath.c): Likewise.
	(CFLAGS-test-tgmath2.c): Likewise.
	(CFLAGS-test-tgmath-ret.c): Likewise.
	(CFLAGS-test-powl.c): Likewise.
	(CFLAGS-test-snan.c): Likewise.
	(CFLAGS-test-signgam-finite.c): Likewise.
	(CFLAGS-test-signgam-finite-c99.c): Likewise.
	(CFLAGS-test-signgam-finite-c11.c): Likewise.
	(CFLAGS-test-signgam-uchar.c): Likewise.
	(CFLAGS-test-signgam-uchar-init.c): Likewise.
	(CFLAGS-test-signgam-uchar-static.c): Likewise.
	(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
	(CFLAGS-test-signgam-uint.c): Likewise.
	(CFLAGS-test-signgam-uint-init.c): Likewise.
	(CFLAGS-test-signgam-uint-static.c): Likewise.
	(CFLAGS-test-signgam-uint-init-static.c): Likewise.
	(CFLAGS-test-signgam-ullong.c): Likewise.
	(CFLAGS-test-signgam-ullong-init.c): Likewise.
	(CFLAGS-test-signgam-ullong-static.c): Likewise.
	(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
	(CFLAGS-test-math-cxx11.cc): Likewise.
	(CFLAGS-test-math-isinff.cc): Likewise.
	(CFLAGS-test-math-iszero.cc): Likewise.
	(CFLAGS-test-math-issignaling.cc): Likewise.
	(CFLAGS-test-math-iscanonical.cc): Likewise.
	(CFLAGS-test-iszero-excess-precision.c): Likewise.
	(CFLAGS-test-iseqsig-excess-precision.c): Likewise.
	(CFLAGS-test-flt-eval-method.c): Likewise.
	(CFLAGS-test-fe-snans-always-signal.c): Likewise.
	(CFLAGS-test-finite-macros.c): Likewise.
	* misc/Makefile (CFLAGS-select.c): Likewise.
	(CFLAGS-tsearch.c): Likewise.
	(CFLAGS-lsearch.c): Likewise.
	(CFLAGS-pselect.c): Likewise.
	(CFLAGS-readv.c): Likewise.
	(CFLAGS-writev.c): Likewise.
	(CFLAGS-preadv.c): Likewise.
	(CFLAGS-preadv64.c): Likewise.
	(CFLAGS-pwritev.c): Likewise.
	(CFLAGS-pwritev64.c): Likewise.
	(CFLAGS-preadv2.c): Likewise.
	(CFLAGS-preadv64v2.c): Likewise.
	(CFLAGS-pwritev2.c): Likewise.
	(CFLAGS-pwritev64v2.c): Likewise.
	(CFLAGS-usleep.c): Likewise.
	(CFLAGS-syslog.c): Likewise.
	(CFLAGS-error.c): Likewise.
	(CFLAGS-getpass.c): Likewise.
	(CFLAGS-mkstemp.c): Likewise.
	(CFLAGS-mkstemp64.c): Likewise.
	(CFLAGS-getsysstats.c): Likewise.
	(CFLAGS-getusershell.c): Likewise.
	(CFLAGS-err.c): Likewise.
	(CFLAGS-tst-tsearch.c): Likewise.
	(CFLAGS-msync.c): Likewise.
	(CFLAGS-fdatasync.c): Likewise.
	(CFLAGS-fsync.c): Likewise.
	* nptl/Makefile (CFLAGS-nptl-init.c): Likewise.
	(CFLAGS-unwind.c): Likewise.
	(CFLAGS-unwind-forcedunwind.c): Likewise.
	(CFLAGS-pthread_cancel.c): Likewise.
	(CFLAGS-pthread_setcancelstate.c): Likewise.
	(CFLAGS-pthread_setcanceltype.c): Likewise.
	(CFLAGS-cancellation.c): Likewise.
	(CFLAGS-libc-cancellation.c): Likewise.
	(CFLAGS-pthread_exit.c): Likewise.
	(CFLAGS-forward.c): Likewise.
	(CFLAGS-pthread_testcancel.c): Likewise.
	(CFLAGS-pthread_join.c): Likewise.
	(CFLAGS-pthread_timedjoin.c): Likewise.
	(CFLAGS-pthread_once.c): Likewise.
	(CFLAGS-pthread_cond_wait.c): Likewise.
	(CFLAGS-sem_wait.c): Likewise.
	(CFLAGS-sem_timedwait.c): Likewise.
	(CFLAGS-fcntl.c): Likewise.
	(CFLAGS-lockf.c): Likewise.
	(CFLAGS-pread.c): Likewise.
	(CFLAGS-pread64.c): Likewise.
	(CFLAGS-pwrite.c): Likewise.
	(CFLAGS-pwrite64.c): Likewise.
	(CFLAGS-wait.c): Likewise.
	(CFLAGS-waitpid.c): Likewise.
	(CFLAGS-sigwait.c): Likewise.
	(CFLAGS-msgrcv.c): Likewise.
	(CFLAGS-msgsnd.c): Likewise.
	(CFLAGS-tcdrain.c): Likewise.
	(CFLAGS-open.c): Likewise.
	(CFLAGS-open64.c): Likewise.
	(CFLAGS-pause.c): Likewise.
	(CFLAGS-recv.c): Likewise.
	(CFLAGS-send.c): Likewise.
	(CFLAGS-accept.c): Likewise.
	(CFLAGS-sendto.c): Likewise.
	(CFLAGS-connect.c): Likewise.
	(CFLAGS-recvfrom.c): Likewise.
	(CFLAGS-recvmsg.c): Likewise.
	(CFLAGS-sendmsg.c): Likewise.
	(CFLAGS-close.c): Likewise.
	(CFLAGS-read.c): Likewise.
	(CFLAGS-write.c): Likewise.
	(CFLAGS-nanosleep.c): Likewise.
	(CFLAGS-sigsuspend.c): Likewise.
	(CFLAGS-msync.c): Likewise.
	(CFLAGS-fdatasync.c): Likewise.
	(CFLAGS-fsync.c): Likewise.
	(CFLAGS-pt-system.c): Likewise.
	(CFLAGS-tst-cleanup2.c): Likewise.
	(CFLAGS-tst-cleanupx2.c): Likewise.
	(CFLAGS-flockfile.c): Likewise.
	(CFLAGS-ftrylockfile.c): Likewise.
	(CFLAGS-funlockfile.c): Likewise.
	(CFLAGS-tst-initializers1.c): Likewise.
	(CFLAGS-tst-initializers1-c89.c): Likewise.
	(CFLAGS-tst-initializers1-c99.c): Likewise.
	(CFLAGS-tst-initializers1-c11.c): Likewise.
	(CFLAGS-tst-initializers1-gnu89.c): Likewise.
	(CFLAGS-tst-initializers1-gnu99.c): Likewise.
	(CFLAGS-tst-initializers1-gnu11.c): Likewise.
	* nscd/Makefile (CFLAGS-nscd_getpw_r.c): Likewise.
	(CFLAGS-nscd_getgr_r.c): Likewise.
	(CFLAGS-nscd_gethst_r.c): Likewise.
	(CFLAGS-nscd_getai.c): Likewise.
	(CFLAGS-nscd_initgroups.c): Likewise.
	* posix/Makefile (CFLAGS-getaddrinfo.c): Likewise.
	(CFLAGS-pause.c): Likewise.
	(CFLAGS-pread.c): Likewise.
	(CFLAGS-pread64.c): Likewise.
	(CFLAGS-pwrite.c): Likewise.
	(CFLAGS-pwrite64.c): Likewise.
	(CFLAGS-sleep.c): Likewise.
	(CFLAGS-wait.c): Likewise.
	(CFLAGS-waitid.c): Likewise.
	(CFLAGS-waitpid.c): Likewise.
	(CFLAGS-getopt.c): Likewise.
	(CFLAGS-wordexp.c): Likewise.
	(CFLAGS-sysconf.c): Likewise.
	(CFLAGS-pathconf.c): Likewise.
	(CFLAGS-fpathconf.c): Likewise.
	(CFLAGS-spawn.c): Likewise.
	(CFLAGS-spawnp.c): Likewise.
	(CFLAGS-spawni.c): Likewise.
	(CFLAGS-glob.c): Likewise.
	(CFLAGS-glob64.c): Likewise.
	(CFLAGS-getconf.c): Likewise.
	(CFLAGS-nanosleep.c): Likewise.
	* pwd/Makefile (CFLAGS-getpwent_r.c): Likewise.
	(CFLAGS-getpwent.c): Likewise.
	(CFLAGS-getpw.c): Likewise.
	(CFLAGS-fgetpwent_r.c): Likewise.
	* resolv/Makefile (CFLAGS-res_hconf.c): Likewise.
	* rt/Makefile (CFLAGS-aio_suspend.c): Likewise.
	(CFLAGS-mq_timedreceive.c): Likewise.
	(CFLAGS-mq_timedsend.c): Likewise.
	(CFLAGS-clock_nanosleep.c): Likewise.
	(CFLAGS-librt-cancellation.c): Likewise.
	* shadow/Makefile (CFLAGS-getspent_r.c): Likewise.
	(CFLAGS-getspent.c): Likewise.
	(CFLAGS-fgetspent.c): Likewise.
	(CFLAGS-fgetspent_r.c): Likewise.
	(CFLAGS-putspent.c): Likewise.
	(CFLAGS-getspnam.c): Likewise.
	(CFLAGS-getspnam_r.c): Likewise.
	* signal/Makefile (CFLAGS-sigpause.c): Likewise.
	(CFLAGS-sigsuspend.c): Likewise.
	(CFLAGS-sigtimedwait.c): Likewise.
	(CFLAGS-sigwait.c): Likewise.
	(CFLAGS-sigwaitinfo.c): Likewise.
	(CFLAGS-sigreturn.c): Likewise.
	* stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise.
	(CFLAGS-vfwprintf.c): Likewise.
	(CFLAGS-tmpfile.c): Likewise.
	(CFLAGS-tmpfile64.c): Likewise.
	(CFLAGS-tempname.c): Likewise.
	(CFLAGS-psignal.c): Likewise.
	(CFLAGS-vprintf.c): Likewise.
	(CFLAGS-cuserid.c): Likewise.
	(CFLAGS-errlist.c): Likewise.
	(CFLAGS-siglist.c): Likewise.
	(CFLAGS-scanf15.c): Likewise.
	(CFLAGS-scanf17.c): Likewise.
	* stdlib/Makefile (CFLAGS-bsearch.c): Likewise.
	(CFLAGS-msort.c): Likewise.
	(CFLAGS-qsort.c): Likewise.
	(CFLAGS-system.c): Likewise.
	(CFLAGS-fmtmsg.c): Likewise.
	(CFLAGS-strfmon.c): Likewise.
	(CFLAGS-strfmon_l.c): Likewise.
	(CFLAGS-strfromd.c): Likewise.
	(CFLAGS-strfromf.c): Likewise.
	(CFLAGS-strfroml.c): Likewise.
	(CFLAGS-tst-bsearch.c): Likewise.
	(CFLAGS-tst-qsort.c): Likewise.
	(CFLAGS-tst-makecontext2.c): Likewise.
	* sunrpc/Makefile (CFLAGS-xbootparam_prot.c): Likewise.
	(CFLAGS-xnlm_prot.c): Likewise.
	(CFLAGS-xrstat.c): Likewise.
	(CFLAGS-xyppasswd.c): Likewise.
	(CFLAGS-xklm_prot.c): Likewise.
	(CFLAGS-xrex.c): Likewise.
	(CFLAGS-xsm_inter.c): Likewise.
	(CFLAGS-xmount.c): Likewise.
	(CFLAGS-xrusers.c): Likewise.
	(CFLAGS-xspray.c): Likewise.
	(CFLAGS-xnfs_prot.c): Likewise.
	(CFLAGS-xrquota.c): Likewise.
	(CFLAGS-xkey_prot.c): Likewise.
	(CFLAGS-auth_unix.c): Likewise.
	(CFLAGS-key_call.c): Likewise.
	(CFLAGS-pmap_rmt.c): Likewise.
	(CFLAGS-clnt_perr.c): Likewise.
	(CFLAGS-openchild.c): Likewise.
	* sysvipc/Makefile (CFLAGS-msgrcv.c): Likewise.
	(CFLAGS-msgsnd.c): Likewise.
	* termios/Makefile (CFLAGS-tcdrain.c): Likewise.
	* time/Makefile (CFLAGS-tzfile.c): Likewise.
	(CFLAGS-tzset.c): Likewise.
	(CFLAGS-getdate.c): Likewise.
	(CFLAGS-test_time.c): Likewise.
	(CPPFLAGS-tst-tzname.c): Likewise.
	* timezone/Makefile (CFLAGS-zdump.c): Likewise.
	(CFLAGS-zic.c): Likewise.
	* wcsmbs/Makefile (CFLAGS-wcwidth.c): Likewise.
	(CFLAGS-wcswidth.c): Likewise.
	(CFLAGS-wcstol.c): Likewise.
	(CFLAGS-wcstoul.c): Likewise.
	(CFLAGS-wcstoll.c): Likewise.
	(CFLAGS-wcstoull.c): Likewise.
	(CFLAGS-wcstod.c): Likewise.
	(CFLAGS-wcstold.c): Likewise.
	(CFLAGS-wcstof128.c): Likewise.
	(CFLAGS-wcstof.c): Likewise.
	(CFLAGS-wcstol_l.c): Likewise.
	(CFLAGS-wcstoul_l.c): Likewise.
	(CFLAGS-wcstoll_l.c): Likewise.
	(CFLAGS-wcstoull_l.c): Likewise.
	(CFLAGS-wcstod_l.c): Likewise.
	(CFLAGS-wcstold_l.c): Likewise.
	(CFLAGS-wcstof128_l.c): Likewise.
	(CFLAGS-wcstof_l.c): Likewise.
	(CPPFLAGS-tst-wchar-h.c): Likewise.
	(CPPFLAGS-wcstold_l.c): Likewise.

Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
2017-12-11 13:11:33 -08:00
Paul Eggert
e69897bf20 timezone: pacify GCC -Wstringop-truncation
Problem reported by Martin Sebor in:
https://sourceware.org/ml/libc-alpha/2017-11/msg00336.html
* timezone/zic.c (writezone): Use memcpy, not strncpy.
2017-11-12 22:00:28 -08:00
Siddhesh Poyarekar
94955362dd zic: Use PRIdMAX to print line numbers
The PRIdLINENUM abstraction is unnecessary and breaks libc.pot
generation.

	* timezone.zic (PRIdLINENO): Remove.
	(verror): Use PRIdMAX.
	* po/libc.pot: Regenerate.
2017-07-25 12:34:14 +05:30
Joseph Myers
92bd70fb85 Update timezone code from tzcode 2017b.
This patch updates files coming from tzcode to the versions in tzcode
2017b.  A couple of changes to other glibc code are needed.
time/tzset.c was using the SECSPERDAY macro from tzfile.h, which no
longer defines that macro, so a local definition is added to tzset.c.
Because timezone/private.h now defines the _ macro whenever
HAVE_GETTEXT is true, even if it was previously defined, it is also
necessary to avoid a conflict with the definition in
include/libintl.h.  Defining _ISOMAC is the obvious way to avoid such
internal definitions being visible, together with defining TZ_DOMAIN
so that zic and zdump continue to get the messages from the libc
domain as desired.  However, zic and zdump rely on PKGVERSION and
REPORT_BUGS_TO from config.h, which is not included by default with
_ISOMAC, so -include config.h needs adding to the options for these
programs as well.  Together those changes allow unmodified tzcode
2017b sources to work in glibc.

Tested for x86_64.

	* timezone/private.h: Update from tzcode 2017b.
	* timezone/tzfile.h: Likewise.
	* timezone/tzselect.ksh: Likewise.
	* timezone/zdump.c: Likewise.
	* timezone/zic.c: Likewise.
	* timezone/Makefile (tz-cflags): Add -D_ISOMAC
	-DTZ_DOMAIN='"libc"' -include $(common-objpfx)config.h.
	* time/tzset.c (SECSPERDAY): New macro.
2017-06-16 11:09:21 +00:00
Joseph Myers
bd6193907a Fix tst-timezone race (bug 14096).
I observed a failure of timezone/tst-timezone with the same symptoms
as reported in bug 14096.

I was unable to reproduce the failure on testing again.  However, from
inspection, the cause is as follows.  tst-timezone uses time zones
compiled from the northamerica file, but has no dependency on any such
zones, so with a parallel build it is possible that they do not get
compiled until after tst-timezone is run.  This patch adds a
dependency on the compiled America/New_York zone (the one used as a
makefile target to cause such zones to be compiled, rather than one
which is actually used in that test) to fix the race.

Tested for x86_64.

	[BZ #14096]
	* timezone/Makefile ($(objpfx)tst-timezone.out): Depend on
	America/New_York.
2017-06-07 17:14:28 +00:00
Zack Weinberg
ceaa98897c Add missing header files throughout the testsuite.
* crypt/md5.h: Test _LIBC with #if defined, not #if.
	* dirent/opendir-tst1.c: Include sys/stat.h.
	* dirent/tst-fdopendir.c: Include sys/stat.h.
	* dirent/tst-fdopendir2.c: Include stdlib.h.
	* dirent/tst-scandir.c: Include stdbool.h.
	* elf/tst-auditmod1.c: Include link.h and stddef.h.
	* elf/tst-tls15.c: Include stdlib.h.
	* elf/tst-tls16.c: Include stdlib.h.
	* elf/tst-tls17.c: Include stdlib.h.
	* elf/tst-tls18.c: Include stdlib.h.
	* iconv/tst-iconv6.c: Include endian.h.
	* iconvdata/bug-iconv11.c: Include limits.h.
	* io/test-utime.c: Include stdint.h.
	* io/tst-faccessat.c: Include sys/stat.h.
	* io/tst-fchmodat.c: Include sys/stat.h.
	* io/tst-fchownat.c: Include sys/stat.h.
	* io/tst-fstatat.c: Include sys/stat.h.
	* io/tst-futimesat.c: Include sys/stat.h.
	* io/tst-linkat.c: Include sys/stat.h.
	* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
	* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
	* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
	* io/tst-openat.c: Include stdbool.h.
	* io/tst-readlinkat.c: Include sys/stat.h.
	* io/tst-renameat.c: Include sys/stat.h.
	* io/tst-symlinkat.c: Include sys/stat.h.
	* io/tst-unlinkat.c: Include stdbool.h.
	* libio/bug-memstream1.c: Include stdlib.h.
	* libio/bug-wmemstream1.c: Include stdlib.h.
	* libio/tst-fwrite-error.c: Include stdlib.h.
	* libio/tst-memstream1.c: Include stdlib.h.
	* libio/tst-memstream2.c: Include stdlib.h.
	* libio/tst-memstream3.c: Include stdlib.h.
	* malloc/tst-interpose-aux.c: Include stdint.h.
	* misc/tst-preadvwritev-common.c: Include sys/stat.h.
	* nptl/tst-basic7.c: Include limits.h.
	* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
	* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
	* nptl/tst-cancel4_1.c: Include stddef.h.
	* nptl/tst-cancel4_2.c: Include stddef.h.
	* nptl/tst-cond16.c: Include limits.h.
	Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
	* nptl/tst-cond18.c: Include limits.h.
	Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
	* nptl/tst-cond4.c: Include stdint.h.
	* nptl/tst-cond6.c: Include stdint.h.
	* nptl/tst-stack2.c: Include limits.h.
	* nptl/tst-stackguard1.c: Include stddef.h.
	* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
	* nptl/tst-tls4moda.c: Include stddef.h.
	Don't include stdio.h, unistd.h, or tls.h.
	* nptl/tst-tls4modb.c: Include stddef.h.
	Don't include stdio.h, unistd.h, or tls.h.
	* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
	* posix/tst-getaddrinfo2.c: Include stdio.h.
	* posix/tst-getaddrinfo5.c: Include stdio.h.
	* posix/tst-pathconf.c: Include sys/stat.h.
	* posix/tst-posix_fadvise-common.c: Include stdint.h.
	* posix/tst-preadwrite-common.c: Include sys/stat.h.
	* posix/tst-regex.c: Include stdint.h.
	Don't include spawn.h or spawn_int.h.
	* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
	* posix/tst-vfork3.c: Include sys/stat.h.
	* resolv/tst-bug18665-tcp.c: Include stdlib.h.
	* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
	* resolv/tst-resolv-search.c: Include stdlib.h.
	* stdio-common/tst-fmemopen2.c: Include stdint.h.
	* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
	* stdlib/test-canon.c: Include sys/stat.h.
	* stdlib/tst-tls-atexit.c: Include stdbool.h.
	* string/test-memchr.c: Include stdint.h.
	* string/tst-cmp.c: Include stdint.h.
	* sysdeps/pthread/tst-timer.c: Include stdint.h.
	* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
	* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
	* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
	* time/clocktest.c: Include stdint.h.
	* time/tst-posixtz.c: Include stdint.h.
	* timezone/tst-timezone.c: Include stdint.h.
2017-02-16 17:33:18 -05:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Carlos O'Donell
3205a39364 Remove mention of checktab.awk in timezone/README. 2016-03-14 14:11:51 -04:00
Carlos O'Donell
f60ee13f5d Removed unused timezone/checktab.awk. 2016-03-10 23:22:49 -05:00
Andreas Schwab
c83196b0df Force rereading TZDEFRULES after it was used to set DST rules only (bug #19253)
If the TZDEFRULES file was used to set the DST rules when $TZ didn't
provide any we need to make sure that the next time it is used we
recompute everything as __tzfile_default changes some setting from what is
provided by TZDEFRULES.
2016-01-11 16:42:25 +01:00
Paul Eggert
670a687dea Update timezone code from tzcode 2015g.
This patch updates the timezone code from tzcode 2015g.  The Makefile
and README changes are based on those in Paul's patch
<https://sourceware.org/ml/libc-alpha/2015-05/msg00553.html>.

Tested for x86_64 and x86.

2016-01-06  Paul Eggert  <eggert@cs.ucla.edu>
	    Joseph Myers  <joseph@codesourcery.com>

	* timezone/private.h: Update from tzcode 2015g.
	* timezone/tzfile.h: Likewise.
	* timezone/tzselect.ksh: Likewise.
	* timezone/zdump.c: Likewise.
	* timezone/zic.c: Likewise.
	* timezone/ialloc.c: Remove file.
	* timezone/scheck.c: Likewise.
	* timezone/Makefile (extra-objs): Remove variable.
	($(objpfx)zic): Do not depend on scheck.o and ialloc.o.
	(tz-cflags): Add -DHAVE_GETTEXT -DUSE_LTZ=0
	-Wno-maybe-uninitialized.
	(CFLAGS-zdump.c): Remove -fwrapv -DNOID -DHAVE_GETTEXT.
	(CFLAGS-zic.c): Remove -DNOID -DHAVE_GETTEXT.
	(CFLAGS-ialloc.c): Remove variable.
	(CFLAGS-scheck.c): Likewise.
	* timezone/README: Update list of files from tzcode.
2016-01-07 11:45:07 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Steve Ellcey
939e092a9e Update timezone/Makefile to use -Wno-unused-variable
GCC 6.0 (prelease) complains about time_t_min and time_t_max
    not being used.  These variables are not used in glibc but
    are needed in other packages.

	* timezone/Makefile (CFLAGS-zic.c): Add -Wno-unused-variable.
	(CFLAGS-ialloc.c): Ditto.
	(CFLAGS-scheck.c): Ditto.
2015-10-07 15:04:49 -07:00
Mike Frysinger
1cba4036b6 timezone: add a configure flag to disable program install
Some distros build+install the timezone tools (zic/zdump/tzselect) outside
of glibc and use the upstream package directly.  Add a configure flag to
glibc so they can disable install of those tools.

This allows tests to run & pass regardless of the configure flag.  Only
the install of them is impacted.
2015-09-18 19:39:46 -04:00
Joseph Myers
36546ffbef Revert timezone/Makefile change.
This change breaks the build with all released versions of GCC.

	* timezone/Makefile: Revert previous change.
2015-09-18 22:02:32 +00:00
Wilco Dijkstra
1344384b52 Undo build error fixes to timezone/private.h, change makefile instead to
ignore the errors.

2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        * timezone/Makefile: Ignore unused variable errors due to private.h
        (time_t_min) and (time_t_max).
        * timezone/private.h (time_t_min): Revert removal.  (time_t_max):
        Likewise.
2015-09-18 21:43:43 +01:00
Mike Frysinger
3cc652e951 timezone: fix parallel check failures
The XT testdata install rules expect the testdata dir to already exist in
the build tree, but it doesn't actually create it.  Instead, it relies on
the build-testdata define happening to be executed before it (which runs
zic which creates the dir).  When we run in parallel though, it's easy to
hit a failure:
$ cd timezone
$ rm -rf $objdir/timezone/testdata
$ make check -j
...
cp testdata/XT1 .../timezone/testdata/XT1
cp: cannot create regular file '.../timezone/testdata/XT1': No such file or directory
Makefile:116: recipe for target '.../timezone/testdata/XT1' failed
make: *** [.../timezone/testdata/XT1] Error 1
make: *** Waiting for unfinished jobs....
2015-09-18 16:03:42 -04:00
Wilco Dijkstra
6565fcb6e1 Fix several build failures with GCC6 due to unused static variables.
2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        * resolv/base64.c (rcsid): Remove unused static.
        * sysdeps/ieee754/dbl-64/atnat2.h (qpi1): Remove unused
        static.  (tqpi1): Likewise.
        * sysdeps/ieee754/dbl-64/uexp.h (one): Likewise.
        * sysdeps/ieee754/dbl-64/upow.h (sqrt_2): Likewise.
        * sysdeps/ieee754/flt-32/e_log10f.c (one): Likewise.
        * sysdeps/ieee754/flt-32/s_cosf.c (one): Likewise.
        * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (zero): Likewise.
        * sysdeps/ieee754/ldbl-128/s_erfl.c (half): Likewise.
        * sysdeps/ieee754/ldbl-128/s_log1pl.c (maxlog): Likewise.
        * timezone/private.h (time_t_min): Likewise.  (time_t_max):
        Likewise.
2015-09-18 20:42:54 +01:00
Joseph Myers
8d9e08981e Don't use -Wno-strict-prototypes in timezone/.
The current timezone/ code from tzcode doesn't need
-Wno-strict-prototypes.  This patch removes it from the CFLAGS
settings in timezone/Makefile.

Tested for x86_64 that glibc still builds OK with the patch applied.

	* timezone/Makefile (CFLAGS-zdump.c): Remove
	-Wno-strict-prototypes.
	(CFLAGS-zic.c): Likewise.
	(CFLAGS-ialloc.c): Likewise.
	(CFLAGS-scheck.c): Likewise.
2015-08-20 20:51:22 +00:00
Andreas Schwab
e8a30921de Remove unused variables from timezone/Makefile 2015-08-09 16:08:11 +02:00
Arjun Shankar
c1f4108352 Modify several tests to use test-skeleton.c
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.

Remove these arguments and include the test skeleton in these tests.
2015-08-06 02:59:04 -04:00
Mike Frysinger
112f28e88c tst-tzset: raise timeout to 5 seconds
This test is reliably taking 2.3 seconds on my system, and the default
is 2 seconds, so it always times out.  Bump it up to 5 seconds instead.
2015-07-15 03:46:03 -04:00
Stefan Liebler
86fe187471 Fix timezone tests run in parallel.
The Makefile rule is called one time for target %/UTC or %/Universal.
If the tests are run in parallel, UTC or Universal can trigger the rule.
This patch patch generates the second test-result file as a copy of the
generated one.
Thus the testsuite can rely on the existence of the test-result files
regardless of which target has triggered the rule.

ChangeLog:

	* timezone/Makefile (%/UTC %/Universal):
	Generate test-result files for UTC and Universal.
2015-06-19 13:47:59 +02:00
Florian Weimer
42261ad731 Make time zone file parser more robust [BZ #17715] 2015-04-24 17:34:48 +02:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
H.J. Lu
126f6c7288 Replace %ld with %jd and cast to intmax_t 2014-12-30 08:10:19 -08:00
Will Newton
85bb81c91b Allow cross-building of tests
Allow building tests in a cross configuration without a test wrapper
defined. This is helpful for doing simple build testing of tests.

ChangeLog:

2014-09-30  Will Newton  <will.newton@linaro.org>

	* localedata/Makefile: Move assignment to tests-special
	into an ifdef testing run-built-tests.
	* timezone/Makefile: Likewise.
2014-09-30 15:02:41 +01:00
Siddhesh Poyarekar
318c7a5846 Remove redundant CPPFLAGS for some programs
These programs get the NOT_IN_libc twice, once through the 'other'
target and another explicitly.  Remove the explicitly added CPFLAG.

	* catgets/Makefile (CPPFLAGS-gencat): Remove.
	* iconv/Makefile (CPPFLAGS-iconv_prog): Likewise.
	(CPPFLAGS-iconvconfig): Likewise.
	* timezone/Makefile (CPPFLAGS-zic): Likewise.
2014-08-21 10:27:13 +05:30
Joseph Myers
0828edbfd6 Update timezone code from tzcode 2014e.
This patch updates the timezone code from tzcode 2014e (the previous
version used was 2013i).

Tested x86_64.

	* timezone/checktab.awk: Update from tzcode 2014e.
	* timezone/private.h: Likewise.
	* timezone/tzfile.h: Likewise.
	* timezone/zdump.c: Likewise.
	* timezone/zic.c: Likewise.
2014-06-25 16:51:17 +00:00
Joseph Myers
686554bff6 Remove redundant C locale settings.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.

LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C.  LC_ALL=C also takes
precedence over LANGUAGE, since

2001-01-02  Ulrich Drepper  <drepper@redhat.com>

	* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
	value is ignored if the selected locale is the C locale.
	* intl/tst-gettext.c: Set locale for above change.
	* intl/tst-translit.c: Likewise.

and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set.  One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.

This patch removes the redundant settings.  It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).

If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation.  However, I don't think we
need to be concerned about pre-2001 build tools.

Tested x86_64.

	* Makefile (install): Don't set LANGUAGE.
	* Makefile.in (install): Likewise.
	* assert/Makefile (test-assert-ENV): Remove variable.
	(test-assert-perr-ENV): Likewise.
	* elf/Makefile (neededtest4-ENV): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* io/ftwtest-sh (LANG): Remove variable.
	* libio/Makefile (tst-widetext-ENV): Likewise.
	* manual/install.texi (Running make install): Don't refer to
	environment settings for make install.
	* INSTALL: Regenerated.
	* nptl/tst-tls6.sh: Don't set LANG.
	* posix/globtest.sh (LANG): Remove variable.
	* string/Makefile (tester-ENV): Likewise.
	(inl-tester-ENV): Likewise.
	(noinl-tester-ENV): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* timezone/Makefile (build-testdata): Use $(built-program-cmd)
	without explicit environment settings.

localedata/ChangeLog:
	* tst-fmon.sh: Don't set LANGUAGE.
	* tst-locale.sh: Likewise.
2014-06-07 19:58:36 +00:00
Joseph Myers
8540f6d2a7 Don't require test wrappers to preserve environment variables, use more consistent environment.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test.  Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers).  In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).

This patch moves to explicitly passing environment variables via
$(test-wrapper-env).  Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.

The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree).  The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.

Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them.  LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C.  So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.

While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile).  So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.

Tested x86_64 (native) and powerpc32 (cross).

	* Makeconfig (run-program-env): New variable.
	(run-program-prefix-before-env): Likewise.
	(run-program-prefix-after-env): Likewise.
	(run-program-prefix): Define in terms of new variables.
	(built-program-cmd-before-env): New variable.
	(built-program-cmd-after-env): Likewise.
	(built-program-cmd): Define in terms of new variables.
	(test-program-prefix-before-env): New variable.
	(test-program-prefix-after-env): Likewise.
	(test-program-prefix): Define in terms of new variables.
	(test-program-cmd-before-env): New variable.
	(test-program-cmd-after-env): Likewise.
	(test-program-cmd): Define in terms of new variables.
	* Rules (make-test-out): Use $(run-program-env).
	* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
	(help): Do not mention environment variables.  Mention
	--timeoutfactor option.
	(timeoutfactor): New variable.
	(blacklist_exports): Remove function.
	(exports): Remove variable.
	(command): Do not include ${exports}.
	* manual/install.texi (Configuring and compiling): Do not mention
	test wrappers preserving environment variables.  Mention that last
	assignment to a variable must take precedence.
	* INSTALL: Regenerated.
	* benchtests/Makefile (run-bench): Use $(run-program-env).
	* catgets/Makefile ($(objpfx)test1.cat): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).
	($(objpfx)test2.cat): Do not specify environment variables
	explicitly.
	($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
	$(run-program-env) and $(built-program-cmd-after-env).
	($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
	$(run-program-env) and $(test-program-cmd-after-env).
	($(objpfx)sample.SJIS.cat): Do not specify environment variables
	explicitly.
	* catgets/test-gencat.sh: Use test_program_cmd_before_env,
	run_program_env and test_program_cmd_after_env arguments.
	* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
	* elf/tst-pathopt.sh: Use run_program_env argument.
	* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
	$(test-wrapper-env) and $(run-program-env).
	* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
	run_program_env arguments.
	* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
	* intl/Makefile ($(objpfx)tst-gettext.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	($(objpfx)tst-gettext2.out): Likewise.
	* intl/tst-gettext.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* intl/tst-gettext2.sh: Likewise.
	* intl/tst-gettext4.sh: Do not set environment variables
	explicitly.
	* intl/tst-gettext6.sh: Likewise.
	* intl/tst-translit.sh: Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* math/Makefile (run-regen-ulps): Use $(run-program-env).
	* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
	* nptl/tst-tls6.sh: Use run_program_env argument.  Set LANG=C
	explicitly with each use of ${test_wrapper_env}.
	* posix/Makefile ($(objpfx)wordexp-tst.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* posix/tst-getconf.sh: Do not set environment variables
	explicitly.
	* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* stdio-common/tst-printf.sh: Do not set environment variables
	explicitly.
	* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
	$(test-program-prefix-before-env), $(run-program-env) and
	$(test-program-prefix-after-env).
	* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	Split $test calls into $test_pre and $test.
	* timezone/Makefile (build-testdata): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).

localedata/ChangeLog:
	* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
	$(built-program-cmd-before-env), $(run-program-env) and
	$(built-program-cmd-after-env).
	($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
	$(run-program-env) and $(test-program-prefix-after-env).
	($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
	$(run-program-env) and $(run-program-prefix-after-env).
	($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
	$(run-program-env) and $(built-program-cmd-after-env).
	($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
	$(run-program-env), $(run-program-prefix-after-env),
	$(test-program-prefix-before-env) and
	$(test-program-prefix-after-env).
	($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
	$(run-program-env) and $(test-program-cmd-after-env).
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)tst-langinfo-static.out): Likewise.
	* gen-locale.sh: Use localedef_before_env, run_program_env and
	localedef_after_env arguments.
	* sort-test.sh: Use test_program_prefix_before_env,
	run_program_env and test_program_prefix_after_env arguments.
	* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
	tst_ctype_after_env arguments.
	* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
	and run_program_prefix_after_env arguments.
	* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
	and tst_langinfo_after_env arguments.
	* tst-locale.sh: Use localedef_before_env, run_program_env and
	localedef_after_env arguments.
	* tst-mbswcs.sh: Do not set environment variables explicitly.
	* tst-numeric.sh: Likewise.
	* tst-rpmatch.sh: Likewise.
	* tst-trans.sh: Use run_program_prefix_before_env,
	run_program_env, run_program_prefix_after_env,
	test_program_prefix_before_env and test_program_prefix_after_env
	arguments.
	* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
	tst_wctype_after_env arguments.
2014-06-06 22:19:27 +00:00
Allan McRae
c72399fbc5 Fix variable used in sed expression in timezone/Makefile 2014-05-16 13:58:31 +10:00
Sami Kerola
893b4f3756 tzselect: use zonedir instead of current working directory 2014-05-13 19:38:32 +02:00
Joseph Myers
6f99f280b0 Count miscellaneous files built on host for testing as tests.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results.  Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.

This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.

Tested x86_64.

	* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
	($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
	* timezone/Makefile (testdata): Move definition above include of
	Rules.
	(test-zones): New variable.
	(tests-special): Add zone files.
	(build-testdata): Use $(evaluate-test).

localedata/ChangeLog:
	* Makefile (LOCALES): Move definition above include of Rules.
	(LOCALE_SRCS): Likewise.
	(CHARMAPS): Likewise.
	(CTYPE_FILES): Likewise.
	(tests-special): Add locale files.
	($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
2014-03-07 03:31:41 +00:00
Roland McGrath
f08e9a2629 Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00