For j0f/j1f/y0f/y1f, the largest error for all binary32
inputs is reduced to at most 9 ulps for all rounding modes.
The new code is enabled only when there is a cancellation at the very end of
the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not
give any visible slowdown on average. Two different algorithms are used:
* around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of
degree 3 are used, computed using the Sollya tool (https://www.sollya.org/)
* for large inputs, an asymptotic formula from [1] is used
[1] Fast and Accurate Bessel Function Computation,
John Harrison, Proceedings of Arith 19, 2009.
Inputs yielding the new largest errors are added to auto-libm-test-in,
and ulps are regenerated for various targets (thanks Adhemerval Zanella).
Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The c59f716993 (accept) and 3ddf9bc185 (connect) added on io/Makefile
instead of socket/Makefile.
Checked on arm-linux-gnueabihf (where without the flags both the
tst-cancelx4 and tst-cancelx5 fails).
config/i386/constraints.md in GCC has
(define_constraint "e"
"32-bit signed integer constant, or a symbolic reference known
to fit that range (for immediate operands in sign-extending x86-64
instructions)."
(match_operand 0 "x86_64_immediate_operand"))
Since movq takes a signed 32-bit immediate or a register source operand,
use "er", instead of "nr"/"ir", constraint for 32-bit signed integer
constant or register on movq.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This fixes missing definition of math functions in libc in a static link
that are no longer built for libm after commit 4898d9712b ("Avoid adding
duplicated symbols into static libraries").
'this' can be understood as the current parameter, but in this case it
is meaning the other one, the one holding the width/precission.
'it' better describes that parameter, differentiating it from the
one corresponding to the current specifier.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that non-LFS stat function is implemented on to on LFS, it will
use statx when available. It allows to check for nanosecond timestamp
if the kernel supports __NR_statx.
Checked on s390-linux-gnu with 4.12.14 kernel.
If building on s390 / i686 with -Os, various conformance
tests are failing with e.g.
conform/ISO/assert.h/linknamespace.out:
[initial] __assert_fail -> [libc.a(assert.o)] __dcgettext -> [libc.a(dcgettext.o)] __dcigettext -> [libc.a(dcigettext.o)] __getcwd -> [libc.a(getcwd.o)] __fstatat64 -> [libc.a(fstatat64.o)] gnu_dev_makedev
The usage of gnu_dev_makedev was recently introduced by
usage of the makedev makro in commit:
5b980d4809
linux: Use statx for MIPSn64
This patch is now linking against __gnu_dev_makedev as
also done in commit:
8b4a118222
Fix -Os gnu_dev_* linknamespace, localplt issues (bug 15105, bug 19463).
About a decade ago, I accidentally wrote the GPLv3 license text on the
test case when the rest of glibc source is LGPL v2.1 or later. As
original author of the test (and there are no other legally
significant changes to the test) I propose to update the license text
to be consistent with the project.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some math functions (such as __isnan*) are built into both libm and
libc because they are needed in libc. The symbol gets exported from
libc.so and not libm.so, because of which dynamic linking works fine;
the symbols are always resolved from libc.so and libm.so uses its
internal copy of the same function if needed.
When linking statically though, the libm variants get used throughout
because the symbols are exported in both archives and libm.a is
searched first.
This patch removes these duplicate objects from the libm.a archive so
that programs always link to libc in both, the static and dynamic
case. The difference this will cause is that libm uses of these
functions will start using the libc versions in the !SHARED case.
This is harmless at the moment because the objects are identical
except for their names.
Some of these duplicates could be removed from libm.so too, but I
avoided that in the interest of retaining an internal reference if at
all those functions get used within libm in future.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
All of the isnan functions are in libc.so due to printf_fp, so move
__isnanf128 there too for consistency.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@ascii.art.br>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
UNREGISTER_ATFORK is now defined for all ports in register-atfork.h, so most
previous includes of fork.h actually only need register-atfork.h now, and
cxa_finalize.c does not need an ifdef UNREGISTER_ATFORK any more.
The nptl-specific fork generation counters can then go to pthreadP.h, and
fork.h be removed.
Checked on x86_64-linux-gnu and i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update ifunc-memmove.h to select the function optimized with AVX512
instructions using ZMM16-ZMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with AVX512 instructions using ZMM16-ZMM31 registers to avoid RTM abort
with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
At function exit, AVX optimized string/memory functions have VZEROUPPER
which triggers RTM abort. When such functions are called inside a
transactionally executing RTM region, RTM abort causes severe performance
degradation. Add tests to verify that string/memory functions won't
cause RTM abort in RTM region.
Since VZEROUPPER triggers RTM abort while VZEROALL won't, select AVX
optimized string/memory functions with
xtest
jz 1f
vzeroall
ret
1:
vzeroupper
ret
at function exit on processors with usable RTM, but without 256-bit EVEX
instructions to avoid VZEROUPPER inside a transactionally executing RTM
region.
Update ifunc-memcmp.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL, AVX512BW and MOVBE since VZEROUPPER isn't needed at function
exit.
Update ifunc-memset.h/ifunc-wmemset.h to select the function optimized
with 256-bit EVEX instructions using YMM16-YMM31 registers to avoid RTM
abort with usable AVX512VL and AVX512BW since VZEROUPPER isn't needed at
function exit.
Update ifunc-memmove.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL since VZEROUPPER isn't needed at function exit.
Update ifunc-strcpy.h to select the function optimized with 256-bit EVEX
instructions using YMM16-YMM31 registers to avoid RTM abort with usable
AVX512VL and AVX512BW since VZEROUPPER isn't needed at function exit.
Update ifunc-avx2.h, strchr.c, strcmp.c, strncmp.c and wcsnlen.c to
select the function optimized with 256-bit EVEX instructions using
YMM16-YMM31 registers to avoid RTM abort with usable AVX512VL, AVX512BW
and BMI2 since VZEROUPPER isn't needed at function exit.
For strcmp/strncmp, prefer AVX2 strcmp/strncmp if Prefer_AVX2_STRCMP
is set.
1. Set Prefer_No_VZEROUPPER if RTM is usable to avoid RTM abort triggered
by VZEROUPPER inside a transactionally executing RTM region.
2. Since to compare 2 32-byte strings, 256-bit EVEX strcmp requires 2
loads, 3 VPCMPs and 2 KORDs while AVX2 strcmp requires 1 load, 2 VPCMPEQs,
1 VPMINU and 1 VPMOVMSKB, AVX2 strcmp is faster than EVEX strcmp. Add
Prefer_AVX2_STRCMP to prefer AVX2 strcmp family functions.
This patch adds workload traces for all double format functions where such
files are missing. For each function, a set of 1000 random values is
generated at random using SageMath, such that the output values are
meaningful (for example avoiding too large inputs for exp10 where the
output would be +Inf). More details about the generated values are
given at the beginning of each file.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tests are refactored to use a common skeleton that handles whether
the underlying filesystem supports 64 bit time, skips 64 bit time
tests when the TU only supports 32 bit, and also skip 64 bit time
tests larger than 32 unsigned int (y2106) if the system does not
support it (MIPSn64 on kernels without statx support).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
on a mips64el-linux-gnu with 4.1.4 and 5.10.0-4-5kc-malta kernel
to verify if the y2106 are indeed skipped.
MIPSn64 kernel ABI for legacy stat uses unsigned 32 bit for second
timestamp, which limits the maximum value to y2106. This patch
make mips64 use statx as for 32-bit architectures.
Thie __cp_stat64_t64_statx is open coded, its usage is solely on
fstatat64 and it avoid the need to redefine the name for mips64
(which will call __cp_stat64_statx since its does not use
__stat64_t64 internally).
If the minimum kernel supports statx there is no need to call the
fallback stat legacy syscalls.
The statx is also called on compat xstat syscall, but different
than the fstatat it calls no fallback and it is assumed to be
always present.
Checked on powerpc-linux-gnu (with and without --enable-kernel=4.11)
and on powerpc64-linux-gnu.
It makes fstatat use __NR_statx, which fix the s390 issue with
missing nanoxsecond support on compat stat syscalls (at least
on recent kernels) and limits the statx call to only one function
(which simplifies the __ASSUME_STATX support).
Checked on i686-linux-gnu and on powerpc-linux-gnu.
1. Support GLIBC_TUNABLES=glibc.cpu.hwcaps=-XSAVE.
2. Disable all features which depend on XSAVE:
a. If OSXSAVE is disabled by glibc tunables. Or
b. If both XSAVE and XSAVEC aren't usable.
The Linux version already target the current thread by using tgkill
along with getpid and gettid.
For arm, libpthread does not do a intra PLT since it will call the
raise from libc.
Checked on x86_64-linux-gnu.
