Fixes:
In file included from ../sysdeps/i386/i686/multiarch/wcschr-c.c:8:0:
../wcsmbs/wcschr.c:26:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes]
../wcsmbs/wcschr.c:37:1: warning: data definition has no type or storage class [enabled by default]
../wcsmbs/wcschr.c:37:1: warning: type defaults to ‘int’ in declaration of ‘__hidden_ver1’ [enabled by default]
../wcsmbs/wcschr.c:37:1: warning: parameter names (without types) in function declaration [enabled by default]
Adjustments for libm ulps added with commit d8b82cad1b,
495fd99f3a, and 5ba3cc691c.
I also adjusted some exp10 ulps definition that was higher than needed.
In the past the "-ftree-loop-linear" switch provided a measurable
improvement in performance for certain functions. At some point it
was assigned as the responsibility of Graphite in GCC. It has been
found that even with Graphite enabled these flags no longer perform
any appreciable improvement over the baseline.
Graphite now has some open bugs which need to be fixed in order for it
to provide measurable performance improvements but it lacks active
development. As a result some compiler distributors may disable
Graphite. If Graphite is disabled then building GLIBC will fail if
the "-ftree-loop-linear" switch is used.
This patch removes the use of "-ftree-loop-linear" as unnecessary.
This patch provides optimized logb (1.2x on PPC32 and 2.5x on PPC64),
logbf (1.1x on PPC32 and 2.2x on PPC64), and logbl (1.3x on PPC32 and
50% on PPC64) for the POWER7 processor.
2012-05-14 Liubov Dmitrieva <liubov.dmitrieva@gmail.com>
* sysdeps/i386/i686/fpu/multiarch/Makefile: New file.
* sysdeps/i386/i686fpu/multiarch/e_expf.c: New file.
* sysdeps/i386/i686fpu/multiarch/e_expf-ia32.S: New file.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: New file.
POSIX 2008 states that if the input for 'logb[f|l]' is a subnormal number
it should be treated as if it were normalized. This means the
implementation should calculate the log2 of the mantissa and add it to the
subnormal exponent (-126 for float and -1022 for double and IBM long
double). This patch takes care of that.
[BZ #14053]
GCC 4.7 might remove consecutive calls to e.g. lrintf since
the assembler instructions are the same and GCC does not know
that the result is different depending on the rounding mode. For
SSE instructions, the control register is not available so there
is no way to inform GCC about this. Therefore the asms are marked
as volatile.
* Makerules (%.abilist): Add vpath on sysdep_dirs.
(check-abi-%): Remove AWK script prerequisite and explicit
abilist directory.
(check-abi): Rewrite to just diff the symlist with the abilist.
(config-tls, config-abi-config): Delete, no longer used.
(update-abi-%): Remove AWK script and explicit abilist directory.
(update-abi): Rewrite to simply compare and conditionally copy the
symlist and the sysdep abilist file. Remove update-abi-config
checks.
* abilist/ld.abilist: Remove.
* abilist/libBrokenLocale.abilist: Remove.
* abilist/libanl.abilist: Remove.
* abilist/libcrypt.abilist: Remove.
* abilist/libdl.abilist: Remove.
* abilist/librt.abilist: Remove.
* abilist/libthread_db.abilist: Remove.
* abilist/libutil.abilist: Remove.
* scripts/extract-abilist.awk: Remove.
* scripts/merge-abilist.awk: Remove.
* sysdeps/generic/libcidn.abilist: New file.
* sysdeps/generic/libnss_compat.abilist: New file.
* sysdeps/generic/libnss_db.abilist: New file.
* sysdeps/generic/libnss_dns.abilist: New file.
* sysdeps/generic/libnss_files.abilist: New file.
* sysdeps/generic/libnss_hesiod.abilist: New file.
* sysdeps/generic/libnss_nis.abilist: New file.
* sysdeps/generic/libnss_nisplus.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libanl.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libBrokenLocale.abilist: New
file.
* sysdeps/unix/sysv/linux/i386/nptl/libc.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libcrypt.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libdl.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libm.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libnsl.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libpthread.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libresolv.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/librt.abilist: New file.
* sysdeps/unix/sysv/linux/i386/nptl/libthread_db.abilist: New
file.
* sysdeps/unix/sysv/linux/i386/nptl/libutil.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libanl.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libBrokenLocale.abilist: New
file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libc.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libcrypt.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libdl.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libm.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libnsl.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libpthread.abilist: New
file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libresolv.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/librt.abilist: New file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libthread_db.abilist: New
file.
* sysdeps/unix/sysv/linux/x86_64/nptl/libutil.abilist: New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/ld.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libanl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libc.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libcrypt.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libdl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libm.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libnsl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libresolv.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/librt.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powercp32/fpu/nptl/libutil.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/ld.abilist: New
file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libanl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libc.abilist: New
file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libcrypt.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libdl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libm.abilist: New
file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libnsl.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libresolv.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/librt.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/nptl/libutil.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libanl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libc.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libcrypt.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libdl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libm.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libnsl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libresolv.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/librt.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-32/nptl/libutil.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libanl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libc.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libcrypt.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libdl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libm.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libnsl.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libresolv.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/librt.abilist: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/s390/s390-64/nptl/libutil.abilist: New
file.
* sysdeps/unix/sysv/linux/sh/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libanl.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libBrokenLocale.abilist: New
file.
* sysdeps/unix/sysv/linux/sh/nptl/libc.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libcrypt.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libdl.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libm.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libnsl.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libpthread.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libresolv.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/librt.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libthread_db.abilist: New file.
* sysdeps/unix/sysv/linux/sh/nptl/libutil.abilist: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libanl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libc.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libcrypt.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libdl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libm.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libnsl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libresolv.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/librt.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/nptl/libutil.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/ld.abilist: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libanl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libBrokenLocale.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libc.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libcrypt.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libdl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libm.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libnsl.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libpthread.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libresolv.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/librt.abilist: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libthread_db.abilist:
New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/nptl/libutil.abilist: New
file.
* sysdeps/sparc/sparc32/bits/atomic.h: Include sysdep.h to get
HWCAP_* values only after the memory barriers have been defined.
(atomic_full_barrier): Define.
(atomic_read_barrier): Define.
(atomic_write_barrier): Define.
[BZ# 6794]
* sysdeps/ieee754/ldbl-96/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-96/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-128/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-64-128/e_ilogbl.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/s_ilogbl.c: Moved to ...
* sysdeps/sparc/sparc64/soft-fp/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
[BZ #6794]
Following Joseph comments about bug 6794, here is a proposed fix. It turned out
to be a large fix mainly because I had to move some file along to follow libm
files/names conventions.
Basically I have added wrappers (w_ilogb.c, w_ilogbf.c, w_ilogbl.c) that now calls
the symbol '__ieee754_ilogb'. The wrappers checks for '__ieee754_ilogb' output and
set the errno and raise exceptions as expected.
The '__ieee754_ilogb' is implemented in sysdeps. I have moved the 's_ilogb[f|l]' files
to e_ilogb[f|l] and renamed the '__ilogb[f|l]' to '__ieee754_ilogb[f|l]'.
I also found out a bug in i386 and x86-64 assembly coded ilogb implementation where
it raises a FE_DIVBYZERO when argument is '0.0'. I corrected this issue as well.
Finally I added the errno and FE_INVALID tests for 0.0, NaN and +-InF argument. Tested
on i386, x86-64, ppc32 and ppc64.
It may sometimes be desirable to make the dynamic linker only pick up
libraries from the library path and rpath and not look at the
ld.so.cache that ldconfig generates. An example of such a use case is
the glibc testsuite where the dynamic linker must not be influenced by
any external paths or caches.
This change adds a new option --inhibit-ldcache that when used, tells
the dynamic linker to not use ld.so.cache even if it is available.
The proper define to check "am I in a shared lib" is "SHARED", not "PIC".
The two new memset_chk functions incorrectly depend on "PIC".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[BZ #13592]
There are several signed compares of the size argument, whereas
it really is unsigned. Depending on situations e.g. a "memset(ptr, 0,
-1)" segfault (but for the wrong reasons, because jumping into nirvana)
or succeeds even.
In normal use this is harmless, as a size with signbit set indicates
more than half the address space which on x86_64 is impossible to
allocate, but as the size is used to index some jump tables this
potentially could have other unwanted side effects.
[BZ#13926]
Currently __bswap_64 is not defined at all for non-GCC compilers.
Define it but guard it with __GLIBC_HAVE_LONG_LONG.
endian.h uses __bswap_64, make the functions only available
if __GLIBC_HAVE_LONG_LONG is defined.
I've improved the following implementation of memcpy:
"sysdeps/i386/i686/multiarch/memcpy-ssse3.S".
The patch includes some minor style fixes, but the important part is
just using prefetch loops for the case:
DATA_CACHE_SIZE_HALF <= len < SHARED_CACHE_SIZE_HALF and
src and dst pointers have unequal 16 byte alignments.
This gives from 6% - 50% performance boost on the atom machine, about
24,73% in geometric mean.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Provide a hidden def to
the IFUNC routine in the libc case.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/rtld-memcpy.c: New file.
* sysdeps/sparc/Makefile: Add -fPIC to ASFLAGS-.os here....
* sysdeps/sparc/sparc32/Makefile: rather than here...
* sysdeps/sparc/sparc64/Makefile: and here.
* sysdeps/s390/s390-64/elf/bsd-_setjmp.S: Moved to ...
* sysdeps/s390/s390-64/bsd-_setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/bsd-setjmp.S: Moved to ...
* sysdeps/s390/s390-64/bsd-setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/setjmp.S: Moved to ...
* sysdeps/s390/s390-64/setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/configure.in: Moved to ...
* sysdeps/s390/s390-64/configure.in: ... here
* sysdeps/s390/s390-64/elf/configure: Delete file.
* sysdeps/s390/s390-64/elf/start.S: Moved to ...
* sysdeps/s390/s390-64/start.S: ... here.
* sysdeps/s390/s390-64/elf/configure: Delete.
* sysdeps/s390/s390-32/elf/bsd-_setjmp.S: Moved to ...
* sysdeps/s390/s390-32/bsd-_setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/bsd-setjmp.S: Moved to ...
* sysdeps/s390/s390-32/bsd-setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/setjmp.S: Moved to ...
* sysdeps/s390/s390-32/setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/configure.in: Moved to ...
* sysdeps/s390/s390-32/configure.in: ... here.
* sysdeps/s390/s390-32/elf/configure: Delete file.
* sysdeps/s390/s390-32/elf/start.S: Moved to ...
* sysdeps/s390/s390-32/start.S: ... here.
* sysdeps/powerpc/elf/ifunc-sel.h: Moved to ...
* sysdeps/powerpc/ifunc-sel.h: ... here.
* sysdeps/powerpc/elf/rtld-global-offsets.sym: Moved to ...
* sysdeps/powerpc/rtld-global-offsets.sym: ... here.
Move sysdeps/i386/elf/start.S to sysdeps/i386/
Merge sysdeps/i386/elf/configure.in into sysdeps/i386/configure.in
Delete merged files sysdeps/i386/elf/configure.in, sysdeps/i386/elf/Versions
and sysdeps/i386/elf/configure.
Also fix a bug in libc_feupdateenv_53bit: don't force the rounding
precision back to _FPU_EXTENDED, instead restore the precision that
the user had in effect beforehand.
[BZ #6471]
* sysdeps/unix/sysv/linux/shmat.c (shmat): Test for syscall errors
properly.
* sysdeps/unix/sysv/linux/sparc/getshmlba.c: New file.
* sysdeps/unix/sysv/linux/sparc/Makefile: Add getshmlba to
sysdep_routines when subdir is sysvipc.
* sysdeps/unix/sysv/linux/sparc/bits/shm.h (SHMLBA): Use new
__getshmlba helper.
* sysdeps/sparc/sparc64/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new vis3
fmin/fmax sysdep routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/unix/sysv/linux/multiarch/Implies:
New file.
* sysdeps/sparc/configure.in: New file.
* sysdeps/sparc/configure: Generate.
* configure.in (libc_cv_sparc_as_vis3): Substitute.
* configure: Regenerate.
* config.h.in (HAVE_AS_VIS3_SUPPORT): New.
* config.make.in (have-as-vis3): New.
* sysdeps/sparc/sparc32/sparcv9/Makefile (ASFLAGS-*): If VIS3 is
available use -Av9d instead of -Av9a.
* sysdeps/sparc/sparc64/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S (__copysign): Use fzeros/fnegs
to load 0x80000000 into a float register instead of using the stack.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S (__copysignf): Likewise.
* sysdeps/generic/dl-osinfo.h (_dl_setup_stack_chk_guard): Fix
masking out of the most significant byte of random value used.
* sysdeps/unix/sysv/linux/dl-osinfo.h (_dl_setup_stack_chk_guard):
Fix coding style in previous change.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_CLONE_THREAD_FLAGS): Set on sparc when 2.5.64 and later.
(__ASSUME_TGKILL): Set on sparc when 2.6.1 and later, simplify
expression.
(__ASSUME_FADVISE64_64_SYSCALL): Set on sparc when 2.6.1 and
later.
* sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c
(__makecontext): Fix signedness of pointer casts setting up 'sp'.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (INLINE_SYSCALL) Use 'long'
for 'resultvar' otherwise things get truncated on 64-bit.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Protect local
variables with appropriate CPP guards.
* sysdeps/sparc/sparc32/dl-trampoline.S: Propagate the stack_ptr from the
frame pointer, not the stack pointer. Correct layout comments. Fix test
on resulting framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit call.
* sysdeps/sparc/sparc64/dl-trampoline.S: Fix test on resulting
framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit
call.
* elf/sotruss-lib.c (la_sparc32_gnu_pltenter, la_sparc64_gnu_pltenter,
la_sparc32_gnu_pltexit, la_sparc64_gnu_pltexit): New functions.
(print_exit): Fix format string for return register value.
/
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c
(set_obp_int): New function.
(get_obp_int): New function.
(__get_clockfreq_via_dev_openprom): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (INTERNAL_SYSCALL_ERROR_P): Avoid
unused variable warnings on 'val' and use builtin_expect.
(INLINE_SYSCALL): Don't wrap INTERNAL_SYSCALL_ERROR_P with builtin_expect.
(INLINE_CLONE_SYSCALL): Likewise.
nptl/
* sysdeps/unix/sysv/linux/sparc/sem_post.c (__new_sem_post): Use
atomic_increment and remove unused local variable.
(__old_sem_post): Likewise.
Replace gettimeofday with __vdso_gettimeofday.
* sysdeps/unix/sysv/linux/x86_64/init-first.c (_libc_vdso_platform_setup):
Replace clock_gettime and getcpu with __vdso_clock_gettime and
__vdso_getcpu.
* sysdeps/unix/sysv/linux/x86_64/time.c (time_ifunc): Replace
time with __vdso_time.
* sysdeps/generic/dl-osinfo.h (_dl_setup_stack_chk_guard): Ensure
default stack guard is set in last bytes.
* sysdeps/unix/sysv/linux/dl-osinfo.h (_dl_setup_stack_chk_guard): Same.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinff.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: New file.
* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Do not
manipulate bits before adding and subtracting TWO112[sx].
* sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise.
* sysdeps/sparc/sparc32/__longjmp.S: Unwind in the 'thread' path
using a normal save/restore sequence, rather than allocating a
dummy stack frame just to store a frame pointer and restore.
* sysdeps/unix/sysv/linux/sparc/sparc32/____longjmp_chk.S: Likewise.
* config.h.in (HAVE_BINUTILS_GOTDATA): New.
(HAVE_GCC_GOTDATA): New.
* sysdeps/sparc/elf/configure.in: Test for GOTDATA
relocation support in both binutils and gcc.
* sysdeps/sparc/elf/configure: Regenerate.
* sysdeps/unix/sparc/sysdep.h (SPARC_PIC_THUNK): New macro.
(SETUP_PIC_REG): Use SPARC_PIC_THUNK and don't save and restore
%o7 across the call.
(SETUP_PIC_REG_LEAF): Do %o7 save/restore in this new macro
instead.
* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Use
SETUP_PIC_REG_LEAF.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise.
* sysdeps/sparc/crti.S: Use SETUP_PIC_REG.
* sysdeps/sparc/crtn.S: Likewise.
/
* sysdeps/sparc/Makefile: Add -fPIC when building crt{i,n}.S
* sysdeps/sparc/crti.S: New file.
* sysdeps/sparc/crtn.S: New file.
* sysdeps/sparc/sparc32/Makefile: Remove initfini handling.
* sysdeps/sparc/sparc64/Makefile: Likewise.
nptl/
* sysdeps/sparc/Makefile: Add -fPIC when building pt-crti.S and crtn.S
* sysdeps/powerpc/powerpc32/crti.S: New file.
* sysdeps/powerpc/powerpc32/crtn.S: New file.
* sysdeps/powerpc/powerpc64/crti.S: New file.
* sysdeps/powerpc/powerpc64/crtn.S: New file.
There is no problem with strcmp, it doesn't use the YMM registers.
The math routines might since gcc perhaps generates such code.
Introduce bit_YMM_USBALE and use it in the math routines.
Wrong copy algorithm for last bytes, not thread safety.
In some particular cases it uses the destination
memory beyond the string end for
16-byte load, puts changes into that part that is relevant
to destination string and writes whole 16-byte chunk into memory.
I have a test case where the memory beyond the string end contains
malloc/free data, that appear corrupted in case free() updates
it in between the 16-byte read and 16-byte write.
Whenever getaddrinfo needed network interface information it used the
netlink interface to read the information every single time. The
problem is that this information can change at any time.
The patch implements monitoring of the network interfaces through
nscd. If no change is detected the previously read information can
be reused (which is the norm). This timestamp information is also
made available to other processes using the shared memory segment
between nscd and those processes.