This change forces realignment of the stack pointer in __tls_get_addr, so
that binaries compiled by GCCs older than GCC 4.9:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58066
continue to work even if vector instructions are used in glibc which
require the ABI stack realignment.
__tls_get_addr_slow is added to handle the slow paths in the default
implementation of__tls_get_addr in elf/dl-tls.c. The new __tls_get_addr
calls __tls_get_addr_slow after realigning the stack. Internal calls
within ld.so go directly to the default implementation of __tls_get_addr
because they do not need stack realignment.
[BZ #21609]
* sysdeps/x86_64/Makefile (sysdep-dl-routines): Add tls_get_addr.
(gen-as-const-headers): Add rtld-offsets.sym.
* sysdeps/x86_64/dl-tls.c: New file.
* sysdeps/x86_64/rtld-offsets.sym: Likwise.
* sysdeps/x86_64/tls_get_addr.S: Likewise.
* sysdeps/x86_64/dl-tls.h: Add multiple inclusion guards.
* sysdeps/x86_64/tlsdesc.sym (TI_MODULE_OFFSET): New.
(TI_OFFSET_OFFSET): Likwise.
This patch implements a requirement of binutils >= 2.25 (up from 2.22)
to build glibc. Tests for 2.24 or later on x86_64 and s390 are
removed. It was already the case, as indicated by buildbot results,
that 2.24 was too old for building tests for 32-bit x86 (produced
internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know
if any configure tests for binutils features are obsolete given the
increased version requirement.
Tested for x86_64.
* configure.ac (AS): Require binutils 2.25 or later.
(LD): Likewise.
* configure: Regenerated.
* sysdeps/s390/configure.ac (AS): Remove version check.
* sysdeps/s390/configure: Regenerated.
* sysdeps/x86_64/configure.ac (AS): Remove version check.
* sysdeps/x86_64/configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for binutils 2.25 or later.
* INSTALL: Regenerated.
Check the first 32 bytes before checking size when size >= 32 bytes
to avoid unnecessary branch if the difference is in the first 32 bytes.
Replace vpmovmskb/subl/jnz with vptest/jnc.
On Haswell, the new version is as fast as the previous one. On Skylake,
the new version is a little bit faster.
* sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S (MEMCMP): Check
the first 32 bytes before checking size when size >= 32 bytes.
Replace vpmovmskb/subl/jnz with vptest/jnc.
This patch enables float128 support for x86_64 and x86. All GCC
versions that can build glibc provide the required support, but since
GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN
tests and some tests of NaN payloads need to be disabled with such
compilers (this does not affect the generated glibc binaries at all,
just the tests). bits/floatn.h declares float128 support to be
available for GCC versions that provide the required libgcc support
(4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd);
compilation-only support was present some time before then, but not
really useful without the libgcc functions.
fenv_private.h needed updating to avoid trying to put _Float128 values
in registers. I make no assertion of optimality of the
math_opt_barrier / math_force_eval definitions for this case; they are
simply intended to be sufficient to work correctly.
Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was
compilation tests only with build-many-glibcs.py to verify the ABI
baseline updates. I have not done any testing for Hurd, although the
float128 support is enabled there as for GNU/Linux.)
* sysdeps/i386/Implies: Add ieee754/float128.
* sysdeps/x86_64/Implies: Likewise.
* sysdeps/x86/bits/floatn.h: New file.
* sysdeps/x86/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on x86_64 and x86.
* sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>.
(math_opt_barrier): Do not put _Float128 values in floating-point
registers.
(math_force_eval): Likewise.
[__x86_64__] (SET_RESTORE_ROUNDF128): New macro.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append
to Makefile variable.
* sysdeps/x86/fpu/e_sqrtf128.c: New file.
* sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc.
* sysdeps/x86/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro.
* math/libm-test-getpayload.inc (getpayload_test_data): Use
XFAIL_FLOAT128_PAYLOAD.
* math/libm-test-setpayload.inc (setpayload_test_data): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data):
Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This code:
L(between_2_3):
/* Load as big endian with overlapping loads and bswap to avoid
branches. */
movzwl -2(%rdi, %rdx), %eax
movzwl -2(%rsi, %rdx), %ecx
shll $16, %eax
shll $16, %ecx
movzwl (%rdi), %edi
movzwl (%rsi), %esi
orl %edi, %eax
orl %esi, %ecx
bswap %eax
bswap %ecx
subl %ecx, %eax
ret
needs a saturating subtract because the full register is used.
With this commit, only the lower 24 bits of the register are used,
so a regular subtraction suffices.
The test case change adds coverage for these kinds of bugs.
Implement strcmp family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcmp family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcmp-sse2, strcmp-sse4_2, strncmp-sse2, strncmp-sse4_2,
strcasecmp_l-sse2, strcasecmp_l-sse4_2, strcasecmp_l-avx,
strncase_l-sse2, strncase_l-sse4_2 and strncase_l-avx.
* sysdeps/x86_64/multiarch/ifunc-strcasecmp.h: New file.
* sysdeps/x86_64/multiarch/strcasecmp.c: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-avx.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l.c: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp.c: Likewise.
* sysdeps/x86_64/multiarch/strncase.c: Likewise.
* sysdeps/x86_64/multiarch/strncase_l-avx.S : Likewise.
* sysdeps/x86_64/multiarch/strncase_l-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l.c: Likewise.
* sysdeps/x86_64/multiarch/strncmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp.c: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l.S: Removed.
* sysdeps/x86_64/multiarch/strcmp.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse42.S: Include <sysdep.h>.
(STRCMP_SSE42): New. Defined to __strcmp_sse42 if not defined.
[USE_AS_STRCASECMP_L || USE_AS_STRNCASECMP_L]: Include
"locale-defines.h".
(UPDATE_STRNCMP_COUNTER): New.
(SECTION): Likewise.
(GLABEL): Likewise.
(LABEL): Likewise.
* sysdeps/x86_64/multiarch/strncmp-ssse3.S: Rewrite and enable
for libc.a.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
Remove one more string inline that was defined directly in string.h;
in the absence of the rest of the inlines, it broke the build.
Like other ifunc shims for these functions,
x86_64/multiarch/{mem,st}pcpy.c need to define __NO_STRING_INLINES and
NO_MEMPCPY_STPCPY_REDIRECT.
* string/string.h (__mempcpy_inline): Delete.
* sysdeps/x86_64/multiarch/mempcpy.c
* sysdeps/x86_64/multiarch/stpcpy.c:
Define NO_MEMPCPY_STPCPY_REDIRECT and __NO_STRING_INLINES
before including string.h.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
Implement strcspn/strpbrk/strspn IFUNC selectors in C
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcspn/strpbrk/strspn functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcspn-sse2, strpbrk-sse2 and strspn-sse2.
* sysdeps/x86_64/strcspn.S (STRPBRK_P): Removed.
Check USE_AS_STRPBRK instead of STRPBRK_P.
* sysdeps/x86_64/strpbrk.S (USE_AS_STRPBRK): New.
* sysdeps/x86_64/multiarch/ifunc-sse4_2.h: New file.
* sysdeps/x86_64/multiarch/strcspn-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcspn.c: Likewise.
* sysdeps/x86_64/multiarch/strpbrk-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strpbrk.c: Likewise.
* sysdeps/x86_64/multiarch/strspn-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strspn.c: Likewise.
* sysdeps/x86_64/multiarch/strcspn.S: Removed.
* sysdeps/x86_64/multiarch/strpbrk.S: Likewise.
* sysdeps/x86_64/multiarch/strspn.S: Likewise.
* sysdeps/x86_64/multiarch/strpbrk-c.c: Remove "#ifdef SHARED"
and "#endif".
Implement strcat family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcat family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcat-sse2.
* sysdeps/x86_64/multiarch/strcat-sse2.S: New file.
* sysdeps/x86_64/multiarch/strcat.c: Likewise.
* sysdeps/x86_64/multiarch/strncat.c: Likewise.
* sysdeps/x86_64/multiarch/strcat.S: Removed.
* sysdeps/x86_64/multiarch/strncat.S: Likewise.
Implement memcmp family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memcmp family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memcmp-sse2.
* sysdeps/x86_64/multiarch/ifunc-memcmp.h: New file.
* sysdeps/x86_64/multiarch/memcmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp.c: Likewise.
* sysdeps/x86_64/multiarch/wmemcmp.c: Likewise.
* sysdeps/x86_64/multiarch/memcmp.S: Removed.
* sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
Implement memset family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memset functions within libc.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
Erich Elsen <eriche@google.com>
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-sse2-unaligned-erms, and memset_chk-nonshared.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add test for __memset_chk_erms.
Update comments.
* sysdeps/x86_64/multiarch/ifunc-memset.h: New file.
* sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* sysdeps/x86_64/multiarch/memset.c: Likewise.
* sysdeps/x86_64/multiarch/memset_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memset.S: Removed.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
(__memset_chk_erms): New function.
Implement memmove family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memmove family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memmove-sse2-unaligned-erms, memcpy_chk-nonshared,
mempcpy_chk-nonshared and memmove_chk-nonshared.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memmove_chk_erms,
__memcpy_chk_erms and __mempcpy_chk_erms. Update comments.
* sysdeps/x86_64/multiarch/ifunc-memmove.h: New file.
* sysdeps/x86_64/multiarch/memcpy.c: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.c: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.c: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.c: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memcpy.S: Removed.
* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
(__mempcpy_chk_erms): New function.
(__memmove_chk_erms): Likewise.
(__memcpy_chk_erms): New alias.
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
Implement strcpy family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcpy family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcpy-sse2 and stpcpy-sse2.
* sysdeps/x86_64/multiarch/ifunc-unaligned-ssse3.h: New file.
* sysdeps/x86_64/multiarch/stpcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpncpy.c: Likewise.
* sysdeps/x86_64/multiarch/strcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.c: Likewise.
* sysdeps/x86_64/multiarch/strncpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.S: Removed.
* sysdeps/x86_64/multiarch/stpncpy.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
* sysdeps/x86_64/multiarch/strncpy.S: Likewise.
* sysdeps/x86_64/multiarch/stpncpy-c.c (weak_alias): New.
(libc_hidden_def): Always defined as empty.
* sysdeps/x86_64/multiarch/strncpy-c.c (libc_hidden_builtin_def):
Always Defined as empty.
Optimize strrchr/wcsrchr with AVX2 to check 32 bytes with vector
instructions. It is as fast as SSE2 version for small data sizes
and up to 1X faster for large data sizes on Haswell. Select AVX2
version on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strrchr-sse2, strrchr-avx2, wcsrchr-sse2 and wcsrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strrchr_avx2,
__strrchr_sse2, __wcsrchr_avx2 and __wcsrchr_sse2.
* sysdeps/x86_64/multiarch/strrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strrchr.c: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr.c: Likewise.
Optimize memrchr with AVX2 to search 32 bytes with a single vector
compare instruction. It is as fast as SSE2 memrchr for small data
sizes and up to 1X faster for large data sizes on Haswell. Select
AVX2 memrchr on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memrchr-sse2 and memrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memrchr_avx2 and
__memrchr_sse2.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/memrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memrchr.c: Likewise.
Optimize strchr/strchrnul/wcschr with AVX2 to search 32 bytes with vector
instructions. It is as fast as SSE2 versions for size <= 16 bytes and up
to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on
AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strchr-sse2, strchrnul-sse2, strchr-avx2, strchrnul-avx2,
wcschr-sse2 and wcschr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strchr_avx2,
__strchrnul_avx2, __strchrnul_sse2, __wcschr_avx2 and
__wcschr_sse2.
* sysdeps/x86_64/multiarch/strchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchr.c: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul.c: Likewise.
* sysdeps/x86_64/multiarch/wcschr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr.c: Likewise.
* sysdeps/x86_64/multiarch/strchr.S: Removed.
Optimize strlen/strnlen/wcslen/wcsnlen with AVX2 to check 32 bytes with
a single vector compare instruction. It is as fast as SSE2 versions for
size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell.
Select AVX2 version on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strlen-sse2, strnlen-sse2, strlen-avx2, strnlen-avx2,
wcslen-sse2, wcslen-avx2 and wcsnlen-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strlen_avx2,
__strlen_sse2, __strnlen_avx2, __strnlen_sse2, __wcslen_avx2,
__wcslen_sse2 and __wcsnlen_avx2.
* sysdeps/x86_64/multiarch/strlen-avx2.S: New file.
* sysdeps/x86_64/multiarch/strlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strlen.c: Likewise.
* sysdeps/x86_64/multiarch/strnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen.c: Likewise.
* sysdeps/x86_64/multiarch/wcslen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c (OPTIMIZE (avx2)): New.
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
SSE2 memchr is extended to support wmemchr. AVX2 memchr/rawmemchr/wmemchr
are added to search 32 bytes with a single vector compare instruction.
AVX2 memchr/rawmemchr/wmemchr are as fast as SSE2 memchr/rawmemchr/wmemchr
for small sizes and up to 1.5X faster for larger sizes on Haswell and
Skylake. Select AVX2 memchr/rawmemchr/wmemchr on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/memchr.S (MEMCHR): New. Depending on if
USE_AS_WMEMCHR is defined.
(PCMPEQ): Likewise.
(memchr): Renamed to ...
(MEMCHR): This. Support wmemchr if USE_AS_WMEMCHR is defined.
Replace pcmpeqb with PCMPEQ.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memchr-sse2, rawmemchr-sse2, memchr-avx2, rawmemchr-avx2,
wmemchr-sse4_1, wmemchr-avx2 and wmemchr-c.
* sysdeps/x86_64/multiarch/ifunc-avx2.h: New file.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr.c: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memchr_avx2, __memchr_sse2,
__rawmemchr_avx2, __rawmemchr_sse2, __wmemchr_avx2 and
__wmemchr_sse2.
Since ifunc-sse4_1.h is included only by wcsnlen.c, we can fold it
into wcsnlen.c. No code changes in wcsnlen.o.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: Removed and folded
into ...
* sysdeps/x86_64/multiarch/wcsnlen.c: Here. Don't include
ifunc-sse4_1.h.
Since wcsnlen.S uses pminud which is the part of SSE4.1, move wcsnlen.S
to multiarch/wcsnlen-sse4_1.S.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
wcsnlen-sse4_1 and wcsnlen-c.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __wcsnlen_sse4_1 and
__wcsnlen_sse2.
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: New file.
* sysdeps/x86_64/multiarch/wcsnlen-c.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-sse4_1.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c: Likewise.
* sysdeps/x86_64/wcsnlen.S: Removed.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
Optimize x86-64 memcmp/wmemcmp with AVX2. It uses vector compare as
much as possible. It is as fast as SSE4 memcmp for size <= 16 bytes
and up to 2X faster for size > 16 bytes on Haswell and Skylake. Select
AVX2 memcmp/wmemcmp on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
Key features:
1. For size from 2 to 7 bytes, load as big endian with movbe and bswap
to avoid branches.
2. Use overlapping compare to avoid branch.
3. Use vector compare when size >= 4 bytes for memcmp or size >= 8
bytes for wmemcmp.
4. If size is 8 * VEC_SIZE or less, unroll the loop.
5. Compare 4 * VEC_SIZE at a time with the aligned first memory area.
6. Use 2 vector compares when size is 2 * VEC_SIZE or less.
7. Use 4 vector compares when size is 4 * VEC_SIZE or less.
8. Use 8 vector compares when size is 8 * VEC_SIZE or less.
* sysdeps/x86/cpu-features.h (index_cpu_MOVBE): New.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memcmp-avx2 and wmemcmp-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memcmp_avx2 and __wmemcmp_avx2.
* sysdeps/x86_64/multiarch/memcmp-avx2.S: New file.
* sysdeps/x86_64/multiarch/wmemcmp-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp.S: Use __memcmp_avx2 on AVX
2 machines if AVX unaligned load is fast and vzeroupper is
preferred.
* sysdeps/x86_64/multiarch/wmemcmp.S: Use __wmemcmp_avx2 on AVX
2 machines if AVX unaligned load is fast and vzeroupper is
preferred.
The difference between strlen and wcslen is byte vs int. We can
replace pminub and pcmpeqb with pminud and pcmpeqd to turn strlen
into wcslen.
* sysdeps/x86_64/strlen.S (PMINU): New.
(PCMPEQ): Likewise.
(SHIFT_RETURN): Likewise.
(FIND_ZERO): Replace pcmpeqb with PCMPEQ.
(strlen): Add SHIFT_RETURN before ret. Replace pcmpeqb and
pminub with PCMPEQ and PMINU.
* sysdeps/x86_64/wcsnlen.S: New file.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero. Also 2 instructions in:
mov %rdi, %rcx
and $15, %rcx
jz L(length_less16_offset0)
mov %rdi, %rcx <<< redundant
and $15, %rcx <<< redundant
are redundant.
* sysdeps/x86_64/memrchr.S (__memrchr): Use 32-bit registers for
the lower 32 bits. Remove redundant instructions.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero.
* sysdeps/x86_64/memchr.S (MEMCHR): Use 32-bit registers for
the lower 32 bits.
SSE2 memchr computes "edx + ecx - 16" where ecx is less than 16. Use
"edx - (16 - ecx)", instead of satured math, to avoid possible addition
overflow. This replaces
add %ecx, %edx
sbb %eax, %eax
or %eax, %edx
sub $16, %edx
with
neg %ecx
add $16, %ecx
sub %ecx, %edx
It is the same for x86_64, except for rcx/rdx, instead of ecx/edx.
* sysdeps/i386/i686/multiarch/memchr-sse2.S (MEMCHR): Use
"edx + ecx - 16" to avoid possible addition overflow.
* sysdeps/x86_64/memchr.S (memchr): Likewise.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
dl_platform and dl_hwcap are set from AT_PLATFORM and AT_HWCAP very
early during startup. They are used by dynamic linker to determine
platform and build an array of hardware capability names, which are
added to search path when loading shared object. dl_platform and
dl_hwcap are unused on x86-64. On i386, i386, i486, i586 and i686
platforms were supported and only SSE2 capability was used.
On x86, usage of AT_PLATFORM and AT_HWCAP to determine platform and
processor capabilities is obsolete since all information is available
in dl_x86_cpu_features. This patch sets dl_platform and dl_hwcap from
dl_x86_cpu_features in dynamic linker. On i386, the available plaforms
are changed to i586 and i686 since i386 has been deprecated. On x86-64,
the available plaforms are haswell, which is for Haswell class processors
with BMI1, BMI2, LZCNT, MOVBE, POPCNT, AVX2 and FMA, and xeon_phi, which
is for Xeon Phi class processors with AVX512F, AVX512CD, AVX512ER and
AVX512PF. A capability, avx512_1, is also added to x86-64 for AVX512
ISAs: AVX512F, AVX512CD, AVX512BW, AVX512DQ and AVX512VL.
[BZ #21391]
* sysdeps/i386/dl-machine.h (dl_platform_init) [IS_IN (rtld)]:
Only call init_cpu_features.
[!IS_IN (rtld)]: Only set GLRO(dl_platform) to NULL if needed.
* sysdeps/x86_64/dl-machine.h (dl_platform_init): Likewise.
* sysdeps/i386/dl-procinfo.h: Removed.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Don't include
<sysdeps/i386/dl-procinfo.h> nor <ldsodefs.h>. Include
<sysdeps/x86/dl-procinfo.h>.
(_dl_procinfo): Replace _DL_HWCAP_COUNT with 32.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h [!IS_IN (ldconfig)]:
Include <sysdeps/x86/dl-procinfo.h> instead of
<sysdeps/generic/dl-procinfo.h>.
* sysdeps/x86/cpu-features.c: Include <dl-hwcap.h>.
(init_cpu_features): Set dl_platform, dl_hwcap and dl_hwcap_mask.
* sysdeps/x86/cpu-features.h (bit_cpu_LZCNT): New.
(bit_cpu_MOVBE): Likewise.
(bit_cpu_BMI1): Likewise.
(bit_cpu_BMI2): Likewise.
(index_cpu_BMI1): Likewise.
(index_cpu_BMI2): Likewise.
(index_cpu_LZCNT): Likewise.
(index_cpu_MOVBE): Likewise.
(index_cpu_POPCNT): Likewise.
(reg_BMI1): Likewise.
(reg_BMI2): Likewise.
(reg_LZCNT): Likewise.
(reg_MOVBE): Likewise.
(reg_POPCNT): Likewise.
* sysdeps/x86/dl-hwcap.h: New file.
* sysdeps/x86/dl-procinfo.h: Likewise.
* sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): New.
(_dl_x86_platforms): Likewise.
On Skylake server, AVX512 load/store instructions in memcpy/memset may
lead to lower CPU turbo frequency in certain situations. Use of AVX2
in memcpy/memset has been observed to have improved overall performance
in many workloads due to the higher frequency.
Since AVX512ER is unique to Xeon Phi, this patch sets Prefer_No_AVX512
if AVX512ER isn't available so that AVX2 versions of memcpy/memset are
used on Skylake server.
[BZ #21396]
* sysdeps/x86/cpu-features.c (init_cpu_features): Set
Prefer_No_AVX512 if AVX512ER isn't available.
* sysdeps/x86/cpu-features.h (bit_arch_Prefer_No_AVX512): New.
(index_arch_Prefer_No_AVX512): Likewise.
* sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Don't use
AVX512 version if Prefer_No_AVX512 is set.
* sysdeps/x86_64/multiarch/memcpy_chk.S (__memcpy_chk):
Likewise.
* sysdeps/x86_64/multiarch/memmove.S (__libc_memmove): Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.S (__memmove_chk):
Likewise.
* sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.S (__mempcpy_chk):
Likewise.
* sysdeps/x86_64/multiarch/memset.S (memset): Likewise.
* sysdeps/x86_64/multiarch/memset_chk.S (__memset_chk):
Likewise.
Add sysdeps/x86/dl-procinfo.c for x86 version of processor capability
information to reduce duplication between i386 and x86_64 dl-procinfo.c.
* sysdeps/i386/dl-procinfo.c: Include
<sysdeps/x86/dl-procinfo.c>.
* sysdeps/x86_64/dl-procinfo.c: Likewise.
* sysdeps/x86/dl-procinfo.c: New file.
This patch removes CALL_THREAD_FCT macro usage and its defition for
x86. For 32 bits it usage is only for force 16 stack alignment,
however stack is already explicit aligned in clone syscall. For
64 bits and x32 it just a function call and there is no need to
code it with inline assembly.
Checked on i686-linux-gnu, x86_64-linux-gnu, and x86_64-linux-gnu-x32.
* nptl/pthread_create.c (START_THREAD_DEFN): Remove
CALL_THREAD_FCT macro usage.
* sysdeps/i386/nptl/tls.h (CALL_THREAD_FCT): Remove definition.
* sysdeps/x86_64/nptl/tls.h (CALL_THREAD_FCT): Likewise.
* sysdeps/x86_64/32/nptl/tls.h: Remove file.
On Skylake server, _dl_runtime_resolve_avx512_opt is used to preserve
the first 8 vector registers. The code layout is
if only %xmm0 - %xmm7 registers are used
preserve %xmm0 - %xmm7 registers
if only %ymm0 - %ymm7 registers are used
preserve %ymm0 - %ymm7 registers
preserve %zmm0 - %zmm7 registers
Branch predication always executes the fallthrough code path to preserve
%zmm0 - %zmm7 registers speculatively, even though only %xmm0 - %xmm7
registers are used. This leads to lower CPU frequency on Skylake
server. This patch changes the fallthrough code path to preserve
%xmm0 - %xmm7 registers instead:
if whole %zmm0 - %zmm7 registers are used
preserve %zmm0 - %zmm7 registers
if only %ymm0 - %ymm7 registers are used
preserve %ymm0 - %ymm7 registers
preserve %xmm0 - %xmm7 registers
Tested on Skylake server.
[BZ #21258]
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_resolve_opt):
Define only if _dl_runtime_resolve is defined to
_dl_runtime_resolve_sse_vex.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_opt):
Fallthrough to _dl_runtime_resolve_sse_vex.
When glibc is compiled with gcc 6.2 that has been configured with
to default to PIC/PIE, the static version of __mempcpy_chk is not built,
as the test is done on PIC instead of SHARED. Fix the test to check for
SHARED, like it is done for similar functions like __memcpy_chk.
2017-03-12 Mike Frysinger <vapier@gentoo.org>
* sysdeps/x86_64/mempcpy_chk.S (__mempcpy_chk): Check for SHARED
instead of PIC.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
