In commit a92f4e6299 ("linux: Add time64
pselect support"), a Microblaze specific implementation of
__pselect32() was added to cover the case of kernels < 3.15 which lack
the pselect6 system call.
This new file sysdeps/unix/sysv/linux/microblaze/pselect32.c takes
precedence over the default implementation
sysdeps/unix/sysv/linux/pselect32.c.
However sysdeps/unix/sysv/linux/pselect32.c provides an implementation
of __pselect32() which is needed when __ASSUME_TIME64_SYSCALLS is not
defined. On Microblaze, which is a 32-bit architecture,
__ASSUME_TIME64_SYSCALLS is only true for kernels >= 5.1.
Due to sysdeps/unix/sysv/linux/microblaze/pselect32.c taking
precedence over sysdeps/unix/sysv/linux/pselect32.c, it means that
when we are with a kernel >= 3.15 but < 5.1, we need a __pselect32()
implementation, but sysdeps/unix/sysv/linux/microblaze/pselect32.c
doesn't provide it, and sysdeps/unix/sysv/linux/pselect32.c which
would provide it is not compiled in.
This causes the following build failure on Microblaze with for example
Linux kernel headers 4.9:
[...]/build/libc_pic.os: in function `__pselect64':
(.text+0x120b44): undefined reference to `__pselect32'
collect2: error: ld returned 1 exit status
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It consolidates the code required to call la_pltexit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_pltenter audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_preinit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_symbind{32,64} audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objclose audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objsearch audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_activity audit
callback.
Also for a new Lmid_t the namespace link_map list are empty, so it
requires to check if before using it. This can happen for when audit
module is used along with dlmopen.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objopen audit callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
hurd initialization stages use RUN_HOOK to run various initialization
functions. That is however using absolute addresses which need to be
relocated, which is done later by csu. We can however easily make the
linker compute relative addresses which thus don't need a relocation.
The new SET_RELHOOK and RUN_RELHOOK macros implement this.
Since 9cec82de71 ("htl: Initialize later"), we let csu initialize
pthreads. We can thus let it initialize tls later too, to better align
with the generic order. Initialization however accesses ports which
links/unlinks into the sigstate for unwinding. We can however easily
skip that during initialization.
No bug.
Optimizations are twofold.
1) Replace page cross and 0/1 checks with masked load instructions in
L(less_vec). In applications this reduces branch-misses in the
hot [0, 32] case.
2) Change controlflow so that L(less_vec) case gets the fall through.
Change 2) helps copies in the [0, 32] size range but comes at the cost
of copies in the [33, 64] size range. From profiles of GCC and
Python3, 94%+ and 99%+ of calls are in the [0, 32] range so this
appears to the the right tradeoff.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug.
Optimizations are twofold.
1) Replace page cross and 0/1 checks with masked load instructions in
L(less_vec). In applications this reduces branch-misses in the
hot [0, 32] case.
2) Change controlflow so that L(less_vec) case gets the fall through.
Change 2) helps copies in the [0, 32] size range but comes at the cost
of copies in the [33, 64] size range. From profiles of GCC and
Python3, 94%+ and 99%+ of calls are in the [0, 32] range so this
appears to the the right tradeoff.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized acos/acosf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector acos/acosf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
s_cosf.c and s_sinf.c have
if (abstop12 (y) < abstop12 (pio4))
where abstop12 takes a float argument, but pio4 is static const double.
pio4 is used only in calls to abstop12 and never in arithmetic. Apply
-static const double pio4 = 0x1.921FB54442D18p-1;
+static const float pio4 = 0x1.921FB6p-1f;
to fix:
FAIL: math/test-float-cos
FAIL: math/test-float-sin
FAIL: math/test-float-sincos
FAIL: math/test-float32-cos
FAIL: math/test-float32-sin
FAIL: math/test-float32-sincos
when compiling with GCC 12.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
When the clock_id is CLOCK_PROCESS_CPUTIME_ID or CLOCK_THREAD_CPUTIME_ID,
on the 5.10 kernel powerpc 32-bit, the 32-bit vDSO is executed successfully (
because the __kernel_clock_gettime in arch/powerpc/kernel/vdso32/gettimeofday.S
does not support these two IDs, the 32-bit time_t syscall will be used),
but tp32.tv_sec is equal to 0, causing the 64-bit time_t syscall to continue to be used,
resulting in two system calls.
Fix commit 72e84d1db2.
Signed-off-by: maminjie <maminjie2@huawei.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add the constant ARPHRD_MCTP, from Linux 5.15, to net/if_arp.h, along
with ARPHRD_CAN which was added to Linux in version 2.6.25 (commit
cd05acfe65ed2cf2db683fa9a6adb8d35635263b, "[CAN]: Allocate protocol
numbers for PF_CAN") but apparently missed for glibc at the time.
Tested for x86_64.
Align the stack pointer to 128 bits during the call to _dl_init() as
specified by the RISC-V ABI [1]. This fixes the elf/tst-align2 test.
Fixes bug 28703.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
The RISC-V ABI [1] mandates that "the stack pointer shall be aligned to
a 128-bit boundary upon procedure entry". This as not the case in clone.
This fixes the misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests.
Fixes bug 28702.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
On KVM guests running on some AMD systems, the IBRS feature is reported
as a synthetic feature using the Intel feature, while the cpuinfo entry
keeps the same. Handle that by first checking the presence of the Intel
feature on AMD systems.
Fixes bug 28704.
The syscall function does not allocate the extra stack frame for scv like other
assembly syscalls using DO_CALL_SCV. So after commit d120fb9941 changed the
offset that is used to save LR, syscall ended up using an invalid offset,
causing regressions on powerpc64. So make sure the extra stack frame is
allocated in syscall.S as well to make it consistent with other uses of
DO_CALL_SCV and avoid similar issues in the future.
Tested on powerpc, powerpc64, and powerpc64le (with and without scv)
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Due to PIE-by-default, PIC is now defined in more cases. libc.a
does not have _rtld_global_ro, and statically linking setcontext
fails. SHARED is the right condition to use, so that libc.a
references _dl_hwcap instead of _rtld_global_ro.
For static PIE support, the !SHARED case would still have to be made
PIC. This patch does not achieve that.
Fixes commit 23645707f1
("Replace --enable-static-pie with --disable-default-pie").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
A local register variable is merely a compiler hint, and so not
appropriate in this context. Move the global register variable into
<thread_pointer.h> and include it from <tls.h>, as there can only
be one global definition for one particular register.
Fixes commit 8dbeb0561e
("nptl: Add <thread_pointer.h> for defining __thread_pointer").
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Add <tst-file-align.h> to support target specific ALIGN for variable
alignment test:
1. Alpha: Use 0x10000.
2. MicroBlaze and Nios II: Use 0x8000.
3. All others: Use 0x200000.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The macro TAYLOR_SIN adds the term `-0.5*da*a^2 + da` in hopes
of regaining some precision as a function of da. However the
comment says we add the term `-0.5*da*a^2 + 0.5*da` which is
different. This fix updates the comment to reflect the
code and also simplifies the calculation by replacing `a` with `x`
because they always have the same value.
Signed-off-by: Akila Welihinda <akilawelihinda@ucla.edu>
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
The generic implementation is shows only slight worse performance:
POWER10 reciprocal-throughput latency
master 8.28478 13.7253
new hypot 7.21945 13.1933
POWER9 reciprocal-throughput latency
master 13.4024 14.0967
new hypot 14.8479 15.8061
POWER8 reciprocal-throughput latency
master 15.5767 16.8885
new hypot 16.5371 18.4057
One way to improve might to make gcc generate xsmaxdp/xsmindp for
fmax/fmin (it onl does for -ffast-math, clang does for default
options).
Checked on powerpc64-linux-gnu (power8) and powerpc64le-linux-gnu
(power9).
The generic hypotf is slight slower, mostly due the tricks the assembly
does to optimize the isinf/isnan/issignaling. The generic hypot is way
slower, since the optimized implementation uses the i386 default
excessive precision to issue the operation directly. A similar
implementation is provided instead of using the generic implementation:
Checked on i686-linux-gnu.
This implementation is based on 'An Improved Algorithm for hypot(a,b)'
by Carlos F. Borges [1] using the MyHypot3 with the following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for subnormal results.
The main advantage of the new algorithm is its precision. With a
random 1e9 input pairs in the range of [LDBL_MIN, LDBL_MAX], glibc
current implementation shows around 0.05% results with an error of
1 ulp (453266 results) while the new implementation only shows
0.0001% of total (1280).
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
[1] https://arxiv.org/pdf/1904.09481.pdf
This implementation is based on 'An Improved Algorithm for hypot(a,b)'
by Carlos F. Borges [1] using the MyHypot3 with the following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for subnormal results.
The main advantage of the new algorithm is its precision. With a
random 1e8 input pairs in the range of [LDBL_MIN, LDBL_MAX], glibc
current implementation shows around 0.02% results with an error of
1 ulp (23158 results) while the new implementation only shows
0.0001% of total (111).
[1] https://arxiv.org/pdf/1904.09481.pdf
Improve hypot performance significantly by using fma when available. The
fma version has twice the throughput of the previous version and 70% of
the latency. The non-fma version has 30% higher throughput and 10%
higher latency.
Max ULP error is 0.949 with fma and 0.792 without fma.
Passes GLIBC testsuite.
This implementation is based on the 'An Improved Algorithm for
hypot(a,b)' by Carlos F. Borges [1] using the MyHypot3 with the
following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for denormal results.
The main advantage of the new algorithm is its precision: with a
random 1e9 input pairs in the range of [DBL_MIN, DBL_MAX], glibc
current implementation shows around 0.34% results with an error of
1 ulp (3424869 results) while the new implementation only shows
0.002% of total (18851).
The performance result are also only slight worse than current
implementation. On x86_64 (Ryzen 5900X) with gcc 12:
Before:
"hypot": {
"workload-random": {
"duration": 3.73319e+09,
"iterations": 1.12e+08,
"reciprocal-throughput": 22.8737,
"latency": 43.7904,
"max-throughput": 4.37184e+07,
"min-throughput": 2.28361e+07
}
}
After:
"hypot": {
"workload-random": {
"duration": 3.7597e+09,
"iterations": 9.8e+07,
"reciprocal-throughput": 23.7547,
"latency": 52.9739,
"max-throughput": 4.2097e+07,
"min-throughput": 1.88772e+07
}
}
Co-Authored-By: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
[1] https://arxiv.org/pdf/1904.09481.pdf
Use a more optimized comparison for check for NaN and infinite and
add an inlined issignaling implementation for float. With gcc it
results in 2 FP comparisons.
The file Copyright is also changed to use GPL, the implementation was
completely changed by 7c10fd3515 to use double precision instead of
scaling and this change removes all the GET_FLOAT_WORD usage.
Checked on x86_64-linux-gnu.
Replace non-UTF-8 and non-ASCII characters in comments with their UTF-8
equivalents so that files don't end up with mixed encodings. With this,
all files (except tests that actually test different encodings) have a
single encoding.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
