Commit Graph

20 Commits

Author SHA1 Message Date
Adhemerval Zanella
a1bdd81664 Refactor internal-signals.h
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures.  On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).

A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t.  The
internal-signals.h is also refactored to remove unused functions

Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).

Checked on x86_64-linux-gnu.

Reviewed-by: Arjun Shankar <arjun@redhat.com>
2022-06-30 14:56:21 -03:00
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Siddhesh Poyarekar
30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30
Florian Weimer
7c241325d6 Force building with -fno-common
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.

GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-07-09 20:09:14 +02:00
Florian Weimer
30639e79d3 Linux: Cleanups after librt move
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it.  $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.

GLIBC_PRIVATE symbols that were needed during the transition are
removed again.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28 09:51:01 +02:00
Florian Weimer
2c16cb88a6 Linux: Move timer helper routines from librt to libc
This adds several temporary GLIBC_PRIVATE exports.  The symbol names
are changed so that they all start with __timer_.

It is now possible to invoke the fork handler directly, so
pthread_atfork is no longer necessary.  The associated error cannot
happen anymore, and cancellation handling can be removed from
the helper thread routine.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-06-25 12:21:12 +02:00
Florian Weimer
3c79234c7a nptl: Move pthreadP.h into sysdeps directory
This mirrors the situation on Hurd.  These directories are on
the include search part, so #include <pthreadP.h> works after this
change on both Hurd and nptl.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-06-22 09:51:10 +02:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Florian Weimer
ba9f6ee9bb Linux: Use __pthread_attr_setsigmask_internal for timer helper thread
timer_create needs to create threads with all signals blocked,
including SIGTIMER (which happens to equal SIGCANCEL).

Fixes commit b3cae39dcb ("nptl: Start
new threads with all signals blocked [BZ #25098]").

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-06-02 11:59:26 +02:00
Adhemerval Zanella
27d83441a2 Block all signals on timer_create thread (BZ#10815)
The behavior of the signal mask on threads created by timer_create
for SIGEV_THREAD timers are implementation-defined and glibc explicit
unblocks all signals before calling the user-defined function.

This behavior, although not incorrect standard-wise, opens a race if a
program using a blocked rt-signal plus sigwaitinfo (and without an
installed signal handler for the rt-signal) receives a signal while
executing the used-defined function for SIGEV_THREAD.

A better alternative discussed in bug report is to rather block all
signals (besides the internal ones not available to application
usage).

This patch fixes this issue by only unblocking SIGSETXID (used on
set*uid function) and SIGCANCEL (used for thread cancellation).

Checked on x86_64-linux-gnu and i686-linux-gnu.
2020-02-19 13:46:31 -03:00
Adhemerval Zanella
bc2eb9321e linux: Remove INTERNAL_SYSCALL_DECL
With all Linux ABIs using the expected Linux kABI to indicate
syscalls errors, the INTERNAL_SYSCALL_DECL is an empty declaration
on all ports.

This patch removes the 'err' argument on INTERNAL_SYSCALL* macro
and remove the INTERNAL_SYSCALL_DECL usage.

Checked with a build against all affected ABIs.
2020-02-14 21:12:45 -03:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Adhemerval Zanella
c6bb095eb5 nptl: Rewrite cancellation macros
This patch changes the way cancellation entrypoints are defined to
instead call the macro SYSCALL_CANCEL.  An usual cnacellation definition
is defined as:

  if (SINGLE_THREAD_P)
    return INLINE_SYSCALL (syscall, NARGS, args...)

  int oldtype = LIBC_CANCEL_ASYNC ();

  return INLINE_SYSCALL (syscall, NARGS, args...)

  LIBC_CANCEL_RESET (oldtype);

And it is rewrited as just:

  SYSCALL_CANCEL (syscall, args...)

The idea is to remove LIBC_CANCEL_ASYNC/LIBC_CANCEL_RESET explicit
usage.

Tested on i386, x86_64, powerpc32, powerpc64le, arm, and aarch64.

	* sysdeps/unix/sysdep.h [SYSCALL_CANCEL]: New macro: define
	cancellable syscalls.
	(SYS_ify): Add guard to no redefine it.
	(INLINE_SYSCALL): Likewise.
	* sysdeps/unix/sysv/linux/accept4.c (accept4): Remove
	LIBC_CANCEL_ASYNC/INLINE_SYSCALL/LIBC_CANCEL_RESET and use
	SYSCALL_CANCEL instead.
	* sysdeps/unix/sysv/linux/alpha/fdatasync.c (__fdatasync): Likewise.
	* sysdeps/unix/sysv/linux/arm/pread.c (__libc_pread): Likewise.
	* sysdeps/unix/sysv/linux/arm/pread64.c (__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/arm/pwrite.c (__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/arm/pwrite64.c (__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/epoll_pwait.c (epoll_pwait): Likewise.
	* sysdeps/unix/sysv/linux/fallocate.c (fallocate): Likewise.
	* sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Likewise.
	* sysdeps/unix/sysv/linux/generic/open.c (__libc_open): Likewise.
	* sysdeps/unix/sysv/linux/generic/open64.c (__libc_open64): Likewise.
	* sysdeps/unix/sysv/linux/generic/pause.c (__libc_pause): Likewise.
	* sysdeps/unix/sysv/linux/generic/poll.c (__poll): Likewise.
	* sysdeps/unix/sysv/linux/generic/recv.c (__libc_recv): Likewise.
	* sysdeps/unix/sysv/linux/generic/select.c (__select): Likewise.
	* sysdeps/unix/sysv/linux/generic/send.c (__libc_send): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/pread.c (__libc_pread):
	Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/pread64.c
	(__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/preadv.c
	(__libc_preadv): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/preadv64.c
	(__libc_readv64): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite.c
	(__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite64.c
	(__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev.c
	(__libc_pwritev): Likewise.
	* sysdeps/sysv/linux/generic/wordsize-32/pwritev64.c
	(__libc_pwritev64): Likewise.
	* sysdeps/unix/sysv/linux/i386/fcntl.c (__libc_fcntl): Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c
	(sync_file_range): Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c (fallocate):
	Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c (fallocate64):
	Likewise.
	* sysdeps/unix/sysv/linux/mips/pread.c (__libc_pread): Likewise.
	* sysdeps/unix/sysv/linux/mips/pread64.c (__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/mips/pwrite.c (__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/mips/pwrite64.c (__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/msgrcv.c (__libc_msgrcv): Likewise.
	* sysdeps/unix/sysv/linux/msgsnd.c (__libc_msgsnd): Likewise.
	* sysdeps/unix/sysv/linux/open64.c (__libc_open64): Likewise.
	* sysdeps/unix/sysv/linux/openat.c (__libc_openat): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread.c (__libc_pread):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread64.c
	(__libc_read64): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite.c (__libc_write):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite64.c (__libc_write64):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c (__libc_fcntl):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c (__libc_pread):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c
	(__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c (__libc_pwrite):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c
	(__libc_pwrite64): Likewise.
	* sysdeps/sysv/linux/powerpc/powerpc64/sync_file_range.c
	(sync_file_range): Likewise.
	* sysdeps/unix/sysv/linux/ppoll.c (ppoll): Likewise.
	* sysdeps/unix/sysv/linux/pread.c (__libc_pread): Likewise.
	* sysdeps/unix/sysv/linux/pread64.c (__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/preadv.c (__libc_preadv): Likewise.
	* sysdeps/unix/sysv/linux/pselect.c (__pselect): Likewise.
	* sysdeps/unix/sysv/linux/pwrite.c (__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/pwrite64.c (__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/pwritev.c (PWRITEV): Likewise.
	* sysdeps/unix/sysv/linux/readv.c (__libc_readv): Likewise.
	* sysdeps/unix/sysv/linux/recvmmsg.c (recvmmsg): Likewise.
	* sysdeps/unix/sysv/linux/sendmmsg.c (sendmmsg): Likewise.
	* sysdeps/unix/sysv/linux/sh/pread.c (__libc_pread): Likewise.
	* sysdeps/unix/sysv/linux/sh/pread64.c (__libc_pread64): Likewise.
	* sysdeps/unix/sysv/linux/sh/pwrite.c (__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/sh/pwrite64.c (__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/sigsuspend.c (__sigsuspend): Likewise.
	* sysdeps/unix/sysv/linux/sigtimedwait.c (__sigtimedwait): Likewise.
	* sysdeps/unix/sysv/linux/sigwaitinfo.c (__sigwaitinfo): Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/msgrcv.c (__libc_msgrcv):
	Likewise.
	* sysdeps/unix/sysv/linux/sync_file_range.c (sync_file_range):
	Likewise.
	* sysdeps/unix/sysv/linux/tcdrain.c (__libc_tcdrain): Likewise.
	* sysdeps/unix/sysv/linux/timer_routines.c (timer_helper_thread):
	Likewise.
	* sysdeps/unix/sysv/linux/wait.c (__libc_wait): Likewise.
	* sysdeps/unix/sysv/linux/waitid.c (__waitid): Likewise.
	* sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/fallocate.c (fallocate):
	Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/preadv.c (preadv): Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/pwritev.c (pwritev): Likewise.
	* sysdeps/unix/sysv/linux/writev.c (__libc_writev): Likewise.
	* sysdeps/unix/sysv/linux/x86_64/recv.c (__libc_recv): Likewise.
	* sysdeps/unix/sysv/linux/x86_64/send.c (__libc_send): Likewise.
2015-06-04 18:58:36 -03:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Roland McGrath
08192659bb Get rid of nptl/sysdeps/ entirely! 2014-07-07 09:28:38 -07:00