While trying to get nptl/tst-initializers1.c to include the test skeleton, I
came across a couple of speed bumps. Firstly: after making the appropriate
changes to the test, running `make check' led to this error:
> In file included from ../malloc/malloc.h:24:0,
..
> from tst-initializers1.c:60:
> ../include/stdio.h:111:1: error: unknown type name `wint_t'
> extern wint_t __getwc_unlocked (FILE *__fp);
So, `wint_t' is used before being defined. Question: Why did test-skeleton.c
not cause this error in any of the other tests that include it?
Anyway, I noticed include/stdio.h includes stddef.h, which in turn defines
`wint_t', but only if `__need_wint_t' is defined. So I put in a
`#define __need_wint_t' before the include to get rid of the error. Is that
the correct fix?
A subsequent `make && make check' led to this second error:
> from tst-initializers1-c89.c:1:
> ../test-skeleton.c: In function `main':
> ../test-skeleton.c:356:11: error: `for' loop initial declarations are only
> allowed in C99 mode
> for (struct temp_name_list *n = temp_name_list;
Although there seem to be several other C89 no-noes in test-skeleton.c, I
needed only to fix this specific one for gcc-4.8.3 to stop complaining.
sem_timedwait converts absolute timeouts to relative to pass them to
the futex syscall. (Before the recent reimplementation, on x86_64 it
used FUTEX_CLOCK_REALTIME, but not on other architectures.)
Correctly implementing POSIX requirements, however, requires use of
FUTEX_CLOCK_REALTIME; passing a relative timeout to the kernel does
not conform to POSIX. The POSIX specification for sem_timedwait says
"The timeout shall be based on the CLOCK_REALTIME clock.". The POSIX
specification for clock_settime says "If the value of the
CLOCK_REALTIME clock is set via clock_settime(), the new value of the
clock shall be used to determine the time of expiration for absolute
time services based upon the CLOCK_REALTIME clock. This applies to the
time at which armed absolute timers expire. If the absolute time
requested at the invocation of such a time service is before the new
value of the clock, the time service shall expire immediately as if
the clock had reached the requested time normally.". If a relative
timeout is passed to the kernel, it is interpreted according to the
CLOCK_MONOTONIC clock, and so fails to meet that POSIX requirement in
the event of clock changes.
This patch makes sem_timedwait use lll_futex_timed_wait_bitset with
FUTEX_CLOCK_REALTIME when possible, as done in some other places in
NPTL. FUTEX_CLOCK_REALTIME is always available for supported Linux
kernel versions; unavailability of lll_futex_timed_wait_bitset is only
an issue for hppa (an issue noted in
<https://sourceware.org/glibc/wiki/PortStatus>, and fixed by the
unreviewed
<https://sourceware.org/ml/libc-alpha/2014-12/msg00655.html> that
removes the hppa lowlevellock.h completely).
In the FUTEX_CLOCK_REALTIME case, the glibc code still needs to check
for negative tv_sec and handle that as timeout, because the Linux
kernel returns EINVAL not ETIMEDOUT for that case, so resulting in
failures of nptl/tst-abstime and nptl/tst-sem13 in the absence of that
check. If we're trying to distinguish between Linux-specific and
generic-futex NPTL code, I suppose having this in an nptl/ file isn't
ideal, but there doesn't seem to be any better place at present.
It's not possible to add a testcase for this issue to the testsuite
because of the requirement to change the system clock as part of a
test (this is a case where testing would require some form of
container, with root in that container, and one whose CLOCK_REALTIME
is isolated from that of the host; I'm not sure what forms of
containers, short of a full virtual machine, provide that clock
isolation).
Tested for x86_64. Also tested for powerpc with the testcase included
in the bug.
[BZ #18138]
* nptl/sem_waitcommon.c: Include <kernel-features.h>.
(futex_abstimed_wait)
[__ASSUME_FUTEX_CLOCK_REALTIME && lll_futex_timed_wait_bitset]:
Use lll_futex_timed_wait_bitset with FUTEX_CLOCK_REALTIME instead
of lll_futex_timed_wait.
for ChangeLog
[BZ #17090]
[BZ #17620]
[BZ #17621]
[BZ #17628]
* NEWS: Update.
* elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV
entries with Static TLS too. Skip entries past the end of the
allocated DTV, from Alan Modra.
(tls_get_addr_tail): Update to glibc_likely/unlikely. Move
Static TLS DTV entry set up from...
(_dl_allocate_tls_init): ... here (fix modid assertion), ...
* elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here...
* nptl/allocatestack.c (init_one_static_tls): ... and here...
* elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound
for Static TLS.
* elf/tlsdeschtab.h (map_generation): Return size_t. Check
that the slot we find is associated with the given map before
using its generation count.
* nptl_db/db_info.c: Include ldsodefs.h.
(rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs.
* nptl_db/structs.def (DB_RTLD_VARIABLE): New macro.
(DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise.
(link_map::l_tls_offset): New struct field.
(dtv_t::counter): Likewise.
(rtld_global): New struct.
(_rtld_global): New rtld variable.
(dl_tls_dtv_slotinfo_list): New rtld global field.
(dtv_slotinfo_list): New struct.
(dtv_slotinfo): Likewise.
* nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include.
(td_lookup): Rename to...
(td_mod_lookup): ... this. Use new mod parameter instead of
LIBPTHREAD_SO.
* nptl_db/td_thr_tlsbase.c: Include link.h.
(dtv_slotinfo_list, dtv_slotinfo): New functions.
(td_thr_tlsbase): Check DTV generation. Compute Static TLS
addresses even if the DTV is out of date or missing them.
* nptl_db/fetch-value.c (_td_locate_field): Do not refuse to
index zero-length arrays.
* nptl_db/thread_dbP.h: Include gnu/lib-names.h.
(td_lookup): Make it a macro implemented in terms of...
(td_mod_lookup): ... this declaration.
* nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override.
(DB_MAIN_VARIABLE): Likewise.
pthread_mutexattr_settype adds PTHREAD_MUTEX_NO_ELISION_NP to kind,
which is an internal flag that pthread_mutexattr_gettype shouldn't
expose, since pthread_mutexattr_settype wouldn't accept it.
This patch replaces unsigned long int and 1UL with uint64_t and
(uint64_t) 1 to support ILP32 targets like x32.
[BZ #17870]
* nptl/sem_post.c (__new_sem_post): Replace unsigned long int
with uint64_t.
* nptl/sem_waitcommon.c (__sem_wait_cleanup): Replace 1UL with
(uint64_t) 1.
(__new_sem_wait_slow): Replace unsigned long int with uint64_t.
Replace 1UL with (uint64_t) 1.
* sysdeps/nptl/internaltypes.h (new_sem): Replace unsigned long
int with uint64_t.
This commit fixes semaphore destruction by either using 64b atomic
operations (where available), or by using two separate fields when only
32b atomic operations are available. In the latter case, we keep a
conservative estimate of whether there are any waiting threads in one
bit of the field that counts the number of available tokens, thus
allowing sem_post to atomically both add a token and determine whether
it needs to call futex_wake.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.
This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific. (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes. The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). I did *not* test a
configuration such as that in which Carlos saw failure.
* nptl/semaphore.h: Move to ...
* sysdeps/pthread/semaphore.h: ... here.
* Makefile (installed-headers): Change nptl/semaphore.h to
sysdeps/pthread/semaphore.h.
Some pthreads functions use getrlimit and gettimeofday, but these
functions are XSI, not base POSIX; this is a namespace issue for
dynamic linking as well as static linking. This patch makes them use
__getrlimit and __gettimeofday instead - the former needed to be newly
exported from libc.so at GLIBC_PRIVATE (and so now needs
libc_hidden_proto / libc_hidden_def), the latter was already exported.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17682]
* resource/Versions (libc): Add __getrlimit at GLIBC_PRIVATE.
* resource/getrlimit.c (__getrlimit): Use libc_hidden_def.
* sysdeps/mach/hurd/getrlimit.c (__getrlimit): Likewise.
* include/sys/resource.h (__getrlimit): Use libc_hidden_proto.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Use
__getrlimit instead of getrlimit.
* nptl/pthread_cond_timedwait.c (__pthread_cond_timedwait): Use
__gettimeofday instead of gettimeofday.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Likewise.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Likewise.
* sysdeps/pthread/aio_misc.c (handle_fildes_io): Likewise.
* conform/Makefile (test-xfail-POSIX2008/aio.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/pthread.h/linknamespace): Likewise.
(test-xfail-POSIX2008/time.h/linknamespace): Likewise.
This patch fixes a warning in a test that was added since my recent
warning cleanup:
tst-stack4.c: In function 'dso_process':
tst-stack4.c:64:7: warning: format '%i' expects argument of type 'int', but argument 3 has type 'uintptr_t' [-Wformat=]
The original variable has type int then is cast to uintptr_t, and from
there to void *, to pass it to a thread, so reversing the process by
casting to uintptr_t and then to int is natural; this patch does so.
Tested for x86_64.
* nptl/tst-stack4.c (dso_process): Use int not uintptr_t for t.
This patch fixes -Waddress warnings in nptl/tst-mutex1.c from
comparing the address of an object with NULL (ATTR may either be NULL,
or the address of an object when included from other tests, and the
warning arises in the latter case). A macro ATTR_NULL is defined
alongside ATTR and used for the tests.
Tested for x86_64.
* nptl/tst-mutex1.c: Include <stdbool.h>.
[!ATTR] (ATTR_NULL): New macro.
(do_test): Test !ATTR_NULL instead of ATTR != NULL.
* nptl/tst-mutexpi1.c (ATTR_NULL): New macro.
* nptl/tst-mutexpp1.c (ATTR_NULL): New macro.
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
This patch fixes "../sysdeps/nptl/pthread.h:670:26: warning:
initialization discards 'volatile' qualifier from pointer target type"
arising when building nptl/tst-cancel-self-cancelstate.c. The problem
is passing a volatile int * to a macro expecting void *; the patch
adds an explicit cast.
Tested for x86_64.
* nptl/tst-cancel-self-cancelstate.c (do_test): Cast argument of
pthread_cleanup_push to void *.
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
This patch eliminates another way in which ex-ports and non-ex-ports
architectures differ, by moving architecture-specific entries from the
top-level shlib-versions file and that in nptl/ to appropriate sysdeps
directories. As with my previous patch
<https://sourceware.org/ml/libc-alpha/2014-06/msg00949.html>, I do not
change the regular expressions used; even where the present
expressions seem more general, I believe they are in fact specific to
the chosen sysdeps directory, because any port that matches the
expression but not the sysdeps directory does not currently exist, and
so would use different symbol versions if added in future (and an
intended goal of these changes is to eliminate the first column in
shlib-versions completely rather than having two different mechanisms
in use for system-specific configuration).
Tested on x86_64 that this does not change the installed shared
libraries. (x86_64 of course does not provide much test coverage for
this patch - what should be architecture-specific contents in
shlib-versions for x86_64 is currently abi-*-ld-soname Makefile
settings, until gnu/lib-names.h is generated more like gnu/stubs.h so
those can move back to shlib-versions.)
* nptl/shlib-versions: Remove architecture-specific entries.
Moved to files in sysdeps.
* shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
pthread_atfork is already built in an extra-libs context, which gives
it NOT_IN_libc in its CPPFLAGS. Adding the same definition to CFLAGS
is pointless.
Verified that the code is unchanged on x86_64.
If a call to the set*id functions fails in a multi-threaded program,
the abort introduced in commit 13f7fe35ae
was triggered.
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
This patch makes files using __ASSUME_* macros include
<kernel-features.h> explicitly, rather than relying on some other
header (such as tls.h, lowlevellock.h or pthreadP.h) to include it
implicitly. (I omitted cases where I've already posted or am testing
the patch that stops the file from needing __ASSUME_* at all.) This
accords with the general principle of making source files include the
headers for anything they use, and also helps make it safe to remove
<kernel-features.h> includes from any file that doesn't use
__ASSUME_* (some of those may be stray includes left behind after
increasing the minimum kernel version, others may never have been
needed or may have become obsolete after some other change).
Tested x86_64 that the disassembly of installed shared libraries is
unchanged by this patch.
* nptl/pthread_cond_wait.c: Include <kernel-features.h>.
* nptl/pthread_rwlock_timedrdlock.c: Likewise.
* nptl/pthread_rwlock_timedwrlock.c: Likewise.
* nptl/sysdeps/unix/sysv/linux/lowlevelrobustlock.c: Likewise.
* nscd/nscd.c: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
This patch removes conditionals on __ASSUME_SOCK_CLOEXEC, and on
SOCK_CLOEXEC being defined, in Linux-specific code, now that all
supported Linux kernel versions can be assumed to have this
functionality. (The macro is also used in OS-independent code and is
not defined for Hurd.)
Tested x86_64 that the disassembly of installed shared libraries is
unchanged by this patch.
* nptl/sysdeps/unix/sysv/linux/mq_notify.c: Do not include
<kernel-features.h>.
(init_mq_netlink): Remove conditional have_sock_cloexec
definitions. Remove code conditional on have_sock_cloexec < 0.
(init_mq_netlink) [!SOCK_CLOEXEC]: Remove conditional code.
(init_mq_netlink) [!__ASSUME_SOCK_CLOEXEC]: Likewise.
* sysdeps/unix/sysv/linux/opensock.c: Do not include
<kernel-features.h>.
(__opensock) [SOCK_CLOEXEC]: Make code unconditional.
(__opensock) [!__ASSUME_SOCK_CLOEXEC]: Remove conditional code.
This patch relies on the C version of the rwlocks posted earlier.
With C rwlocks it is very straight forward to do adaptive elision
using TSX. It is based on the infrastructure added earlier
for mutexes, but uses its own elision macros. The macros
are fairly general purpose and could be used for other
elision purposes too.
This version is much cleaner than the earlier assembler based
version, and in particular implements adaptation which makes
it safer.
I changed the behavior slightly to not require any changes
in the test suite and fully conform to all expected
behaviors (generally at the cost of not eliding in
various situations). In particular this means the timedlock
variants are not elided. Nested trylock aborts.
One difference of the C versions to the assembler wr/rdlock
is that the C compiler saves some registers which are unnecessary
for the fast path in the prologue of the functions. Split the
uncontended fast path out into a separate function. Only when contention is
detected is the full featured function called. This makes
the fast path code (nearly) identical to the assembler version,
and gives uncontended performance within a few cycles.
v2: Rename some functions and add space.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
Added support for TX lock elision of pthread mutexes on s390 and
s390x. This may improve lock scaling of existing programs on TX
capable systems. The lock elision code is only built with
--enable-lock-elision=yes and then requires a GCC version supporting
the TX builtins. With lock elision default mutexes are elided via
__builtin_tbegin, if the cpu supports transactions. By default lock
elision is not enabled and the elision code is not built.
lll_unlock() will be called again if it goes to "wake_all" in
pthread_cond_broadcast(). This may make another thread which is
waiting for lock in pthread_cond_timedwait() unlock. So there are
more than one threads get the lock, it will break the shared data.
It's introduced by commit 8313cb997d2d("FUTEX_*_REQUEUE_PI support for
non-x86 code")
This patch removes the arch specific powerpc implementation and instead
uses the linux default one. Although the current powerpc implementation
already constains the required memory barriers for correct
initialization, the default implementation shows a better performance on
newer chips.
[BZ #15215] This unifies various pthread_once architecture-specific
implementations which were using the same algorithm with slightly different
implementations. It also adds missing memory barriers that are required for
correctness.
This patch moves the __PTHREAD_SPINS definition to arch specific header
since pthread_mutex_t layout is also arch specific. This leads to no
need to defining __PTHREAD_MUTEX_HAVE_ELISION and thus removing of the
undefined compiler warning.
At this point, we can only abort the process because we have already
switched credentials on other threads. Returning an error would still
leave the process in an inconsistent state.
The new xtest needs root privileges to run.
When profiling programs with lock problems with perf record -g dwarf,
libunwind can currently not backtrace through the futex and unlock
functions in pthread. This is because they use out of line sections,
and those are not correctly described in dwarf2 (I believe needs
dwarf3 or 4).
This patch first removes the out of line sections. They only save a
single jump, but cause a lot of pain. Then it converts the now inline
lock code to use the now standard gas .cfi_* commands.
With these changes libunwind/perf can backtrace through the futex
functions now.
Longer term it would be likely better to just use C futex() functions
on x86 like all the other architectures. This would clean the code up
even more.
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* nptl/sysdeps/pthread/pthread.h: Check
__PTHREAD_MUTEX_HAVE_ELISION is defined before testing
its value.
We got rid of LinuxThreads in 2005, but we didn't remove
__LT_SPINLOCK_INIT back then. Do it now.
* nptl/sysdeps/pthread/bits/libc-lockP.h [defined NOT_IN_libc
&& !defined IS_IN_libpthread && __LT_SPINNOCK_INIT != 0]:
Remove.
This is one of a several NPTL patches to build glibc on hppa.
The pthread_attr_[sg]etstack functions are defined by POSIX as
taking a stackaddr that is the lowest addressable byte of the
storage used for the stack. However, the internal iattr variable
of the same name in NPTL is actually the final stack address
as usable in the stack pointer for the machine. Therefore the
NPTL implementation must add and subtract stacksize for
_STACK_GROWS_DOWN architectures. HPPA is a _STACK_GROWS_UP
architecture and doesn't need to add or subtract anything,
the stack address *is* the lowest addressable byte of the
storage.
Tested on hppa-linux-gnu, with no regressions.
Can't impact any other targets because of the conditionals.
If nobody objects I'll check this in at the end of the week.
I can't see there being any objections to this patch except
that it introduces more code to maintain for an old architecture
(perhaps we'll get another _S_G_U target in the future?).
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
Support for /proc/self/task/$tid/comm as added in Linux 2.6.33,
therefore since the test tst-setgetname relies on this functionality
to operate we must skip the test in kernels < 2.6.33. We wrap the
checks with __ASSUME_PROC_PID_TASK_COMM such that in the future when
we move arch_minimum_kernel to 2.6.33 we can remove this code.
TLS in a dlopened object works fine when accessed from a signal
handler. The default kernel scheduling parameters prevents the
testcase to finish within the 4 seconds.
Tested the bigger timeout on s390 and s390x.
Since asynchronous cancellation was removed from system by
commit c4dd57c300
Author: Ondřej Bílka <neleai@seznam.cz>
Date: Tue Jan 14 16:07:50 2014 +0100
Do not enable asynchronous cancellation in system. Fixes bug 14782.
We needlessly enabled thread cancellation before it was necessary.
As
only call that needs to be guarded is waitpid which is cancellation
point we could remove cancellation altogether.
we shouldn't check asynchronous cancellation on system.
[BZ #14782]
* tst-cancel-wrappers.sh: Remove system.
