And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is the default since 2.26 and it has bitrotten over the years,
By using it multiple malloc tests fails:
FAIL: malloc/tst-memalign-2
FAIL: malloc/tst-memalign-2-malloc-hugetlb1
FAIL: malloc/tst-memalign-2-malloc-hugetlb2
FAIL: malloc/tst-memalign-2-mcheck
FAIL: malloc/tst-mxfast-malloc-hugetlb1
FAIL: malloc/tst-mxfast-malloc-hugetlb2
FAIL: malloc/tst-tcfree2
FAIL: malloc/tst-tcfree2-malloc-hugetlb1
FAIL: malloc/tst-tcfree2-malloc-hugetlb2
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch makes build-many-glibcs.py use the new MPFR 4.2.0 and MPC
1.3.1 releases.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
The only way to override LD, AR, OBJCOPY, and GPROF is through
--with-binutils (setting the environments variables on configure is
overridden by LIBC_PROG_BINUTILS).
The build-many-glibcs.py (bmg) glibcs option generates a working config,
but not fully concise (some tools will be set from environment variable,
while other will be set from $CC --print-prog-name). So remove the
environment variable set to always use the "$CC --print-prog-name".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I've updated copyright dates in glibc for 2023. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
With modern ssh clients and daemons it is required to use AcceptEnv and
SendEnv configuration options to correctly support testing the DSO sort
ordering tests. This requirement is present because
scripts/dso-ordering-test.py injects GLIBC_TUNABLES to the left of the
${test_wrapper_env} and so it must both be sent by the ssh client and
accepted by the ssh daemon. This requirement is removed in this change
and the injected GLIBC_TUNABLES is placed after ${run_program_env} and
so still correctly provides the override that the test requires.
This is similar to existing tests like elf/tst-pathopt.sh,
elf/tst-rtld-load-self.sh, and locale/tst-locale-locpath.sh.
Tested that it fixes two failures when cross-testing on aarch64 with
scripts/cross-test-ssh.sh and an ssh client and daemon that do not pass
GLIBC_TUNABLES. Without this fix such a configuration will report the
following failures (since the GLIBC_TUNABLES not preserved):
FAIL: elf/tst-bz15311
FAIL: elf/tst-bz28937
Tested without regression on native x86_64 and aarch64 builds.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The assembler is not issued directly, but rather always through CC
wrapper. The binutils version check if done with LD instead.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
From the tests point of view, this is a necessary step for another
patch [1] and allows parsing macros such as "#define A | B". Without
it, a few tests [2] choke when the other patch [1] is applied:
/src/glibc/scripts/../elf/elf.h:4167: error: uninterpretable macro
token sequence: ( EF_ARC_MACH_MSK | EF_ARC_OSABI_MSK )
Traceback (most recent call last):
File "/src/glibc/elf/tst-glibcelf.py", line 23, in <module>
import glibcelf
File "/src/glibc/scripts/glibcelf.py", line 226, in <module>
_elf_h = _parse_elf_h()
^^^^^^^^^^^^^^
File "/src/glibc/scripts/glibcelf.py", line 223, in _parse_elf_h
raise IOError('parse error in elf.h')
OSError: parse error in elf.h
[1] ARC: update definitions in elf/elf.h
https://sourceware.org/pipermail/libc-alpha/2022-November/143503.html
[2]
tst-glibcelf, tst-relro-ldso, and tst-relro-libc
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Without this change, parse failures result in an exception:
Traceback (most recent call last):
File "tst-glibcelf.py", line 23, in <module>
import glibcelf
File "/path/to/git/scripts/glibcelf.py", line 226, in <module>
_elf_h = _parse_elf_h()
File "/path/to/git/scripts/glibcelf.py", line 221, in _parse_elf_h
result = glibcpp.macro_eval(glibcpp.macro_definitions(tokens), reporter)
File "/path/to/git/scripts/glibcpp.py", line 379, in macro_eval
reporter.error(md.line, 'macro {} redefined'.format(md.name))
File "/path/to/git/scripts/glibcelf.py", line 214, in error
errors += 1
UnboundLocalError: local variable 'errors' referenced before assignment
The initializer for a tunable_t set the bool initialized flag to NULL.
This causes a build failure when pointer to bool conversion warns.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On csky-linux-gnuabiv2, binutils 2.33 produces a DT_JMPREL entry
for the dynamic loader if it does not contain any PLT relocations:
Dynamic section at offset 0x1df48 contains 19 entries:
Tag Type Name/Value
0x0000000e (SONAME) Library soname: [ld-linux-cskyv2-hf.so.1]
0x00000004 (HASH) 0xd4
0x6ffffef5 (GNU_HASH) 0x1a8
0x00000005 (STRTAB) 0x4ac
0x00000006 (SYMTAB) 0x28c
0x0000000a (STRSZ) 527 (bytes)
0x0000000b (SYMENT) 16 (bytes)
0x00000003 (PLTGOT) 0x1f000
0x00000002 (PLTRELSZ) 0 (bytes)
0x00000014 (PLTREL) RELA
0x00000017 (JMPREL) 0xaa4
0x00000007 (RELA) 0x75c
0x00000008 (RELASZ) 840 (bytes)
0x00000009 (RELAENT) 12 (bytes)
0x6ffffffc (VERDEF) 0x700
0x6ffffffd (VERDEFNUM) 3
0x6ffffff0 (VERSYM) 0x6bc
0x6ffffff9 (RELACOUNT) 68
0x00000000 (NULL) 0x0
This confuses the script:
Unexpected output from check-localplt: …/elf/ld.so.jmprel:
*** DT_JMPREL does not match any section's address
This commit changes the script to record the DT_PLTRELSZ value and
reject DT_JMPREL values not a section boundary only if DT_PLTRELSZ
is present with a non-zero value.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The need to maintain elf/elf.h and scripts/glibcelf.py in parallel
results in a backporting hazard: they need to be kept in sync to
avoid elf/tst-glibcelf consistency check failures. glibcelf (unlike
tst-glibcelf) does not use the C implementation to extract constants.
This applies the additional glibcpp syntax checks to <elf.h>.
This changereplaces the types derived from Python enum types with
custom types _TypedConstant, _IntConstant, and _FlagConstant. These
types have fewer safeguards, but this also allows incremental
construction and greater flexibility for grouping constants among
the types. Architectures-specific named constants are now added
as members into their superclasses (but value-based lookup is
still restricted to generic constants only).
Consequently, check_duplicates in elf/tst-glibcelf has been adjusted
to accept differently-named constants of the same value if their
subtypes are distinct. The ordering check for named constants
has been dropped because they are no longer strictly ordered.
Further test adjustments: Some of the type names are different.
The new types do not support iteration (because it is unclear
whether iteration should cover the all named values (including
architecture-specific constants), or only the generic named values),
so elf/tst-glibcelf now uses by_name explicit (to get all constants).
PF_HP_SBP and PF_PARISC_SBP are now of distinct types (PfHP and
PfPARISC), so they are how both present on the Python side. EM_NUM
and PT_NUM are filtered (which was an oversight in the old
conversion).
The new version of glibcelf should also be compatible with earlier
Python versions because it no longer depends on the enum module and its
advanced features.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The main program needs to depend on all shared objects, even objects
that have link-time dependencies among shared objects. Filtering
out shared objects that already have an link-time dependencies is not
necessary here; make will do this automatically.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This reverts commit 6f85dbf102.
Once this change hits the release branches, it will require relinking
of all statically linked applications before static dlopen works
again, for the majority of updates on release branches: The NEWS file
is regularly updated with bug references, so the __libc_early_init
suffix changes, and static dlopen cannot find the function anymore.
While this ABI check is still technically correct (we do require
rebuilding & relinking after glibc updates to keep static dlopen
working), it is too drastic for stable release branches.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The files NEWS, include/link.h, and sysdeps/generic/ldsodefs.h
contribute to the version fingerprint used for detection. The
fingerprint can be further refined using the --with-extra-version-id
configure argument.
_dl_call_libc_early_init is replaced with _dl_lookup_libc_early_init.
The new function is used store a pointer to libc.so's
__libc_early_init function in the libc_map_early_init member of the
ld.so namespace structure. This function pointer can then be called
directly, so the separate invocation function is no longer needed.
The versioned symbol lookup needs the symbol versioning data
structures, so the initialization of libc_map and libc_map_early_init
is now done from _dl_check_map_versions, after this information
becomes available. (_dl_map_object_from_fd does not set this up
in time, so the initialization code had to be moved from there.)
This means that the separate initialization code can be removed from
dl_main because _dl_check_map_versions covers all maps, including
the initial executable loaded by the kernel. The lookup still happens
before relocation and the invocation of IFUNC resolvers, so IFUNC
resolvers are protected from ABI mismatch.
The __libc_early_init function pointer is not protected because
so little code runs between the pointer write and the invocation
(only dynamic linker code and IFUNC resolvers).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ELF and GNU hashes can now be computed using the elf_hash and
gnu_hash functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This patch makes build-many-glibcs.py use binutils 2.39 branch.
Tested with build-many-glibcs.py (compilers and glibcs builds). Note:
binutils 2.39 shows the same failures for i686-linux-gnu-no-pie,
x86_64-linux-gnu-no-pie and x86_64-linux-gnu-x32-no-pie building the
glibc testsuite as binutils mainline does.
This patch updates various miscellaneous files from their upstream
sources (version 2022-05-25).
It is required for loongarch support.
Checked on aarch64-linux-gnu.
Newer versions of GNU grep (after grep 3.7, not inclusive) will warn on
'egrep' and 'fgrep' invocations.
Convert usages within the tree to their expanded non-aliased counterparts
to avoid irritating warnings during ./configure and the test suite.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Fangrui Song <maskray@google.com>
SHT_RISCV_ATTRIBUTES, PT_RISCV_ATTRIBUTES, DT_RISCV_VARIANT_CC were
added in commit 0b6c675073
("Update RISC-V specific ELF definitions"). This caused the
elf/tst-glibcelf consistency check to fail.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On _dl_map_object the underlying file is not opened in trace mode
(in other cases where the underlying file can't be opened,
_dl_map_object quits with an error). If there any missing libraries
being processed, they will not be considered on final nlist size
passed on _dl_sort_maps later in the function. And it is then used by
_dl_sort_maps_dfs on the stack allocated working maps:
222 /* Array to hold RPO sorting results, before we copy back to maps[]. */
223 struct link_map *rpo[nmaps];
224
225 /* The 'head' position during each DFS iteration. Note that we start at
226 one past the last element due to first-decrement-then-store (see the
227 bottom of above dfs_traversal() routine). */
228 struct link_map **rpo_head = &rpo[nmaps];
However while transversing the 'l_initfini' on dfs_traversal it will
still consider the l_faked maps and thus update rpo more times than the
allocated working 'rpo', overflowing the stack object.
As suggested in bugzilla, one option would be to avoid sorting the maps
for trace mode. However I think ignoring l_faked object does make
sense (there is one less constraint to call the sorting function), it
allows a slight less stack usage for trace, and it is slight simpler
solution.
The tests does trigger the stack overflow, however I tried to make
it more generic to check different scenarios or missing objects.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The EI_ABIVERSION field of the ELF header in executables and shared
libraries can be bumped to indicate the minimum ABI requirement on the
dynamic linker. However, EI_ABIVERSION in executables isn't checked by
the Linux kernel ELF loader nor the existing dynamic linker. Executables
will crash mysteriously if the dynamic linker doesn't support the ABI
features required by the EI_ABIVERSION field. The dynamic linker should
be changed to check EI_ABIVERSION in executables.
Add a glibc version, GLIBC_ABI_DT_RELR, to indicate DT_RELR support so
that the existing dynamic linkers will issue an error on executables with
GLIBC_ABI_DT_RELR dependency. When there is a DT_VERNEED entry with
libc.so on DT_NEEDED, issue an error if there is a DT_RELR entry without
GLIBC_ABI_DT_RELR dependency.
Support __placeholder_only_for_empty_version_map as the placeholder symbol
used only for empty version map to generate GLIBC_ABI_DT_RELR without any
symbols.
Hopefully, this will lead to tests that are easier to maintain. The
current approach of parsing readelf -W output using regular expressions
is not necessarily easier than parsing the ELF data directly.
This module is still somewhat incomplete (e.g., coverage of relocation
types and versioning information is missing), but it is sufficient to
perform basic symbol analysis or program header analysis.
The EM_* mapping for architecture-specific constant classes (e.g.,
SttX86_64) is not yet implemented. The classes are defined for the
benefit of elf/tst-glibcelf.py.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The elf/dso-sort-tests-src subdirectory is not changed by this commit,
so it seems that the cut-and-paste error was not material.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This avoid the cross-compiling breakage when the test should not run
($(run-built-tests) equal to no).
Checked on x86_64-linux-gnu and i686-linux-gnu as well with a cross
compile to aarch64-linux-gnu and powerpc64-linux-gnu.
With gdb-11.1-6.fc35.x86_64, I got
FAIL: nptl/test-cond-printers
FAIL: nptl/test-condattr-printers
FAIL: nptl/test-mutex-printers
FAIL: nptl/test-mutexattr-printers
FAIL: nptl/test-rwlock-printers
FAIL: nptl/test-rwlockattr-printers
$ cat nptl/test-condattr-printers.out
Error: Response does not match the expected pattern.
Command: start
Expected pattern: main
Response: Temporary breakpoint 1 at 0x11d5: file test-condattr-printers.c, line 43.
Starting program: /export/build/gnu/tools-build/glibc-cet-gitlab/build-x86_64-linux/nptl/test-condattr-printers
This GDB supports auto-downloading debuginfo from the following URLs:
https://debuginfod.fedoraproject.org/
Enable debuginfod for this session? (y or [n])
Disable debuginfod to avoid GDB messages. This fixes BZ #28757.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I've updated copyright dates in glibc for 2022. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2022 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I (and maybe one or two others) added a (C) to the copyright notice
regardless of the contribution checklist[1] not mentioning it. Fix all
these instances so that the notice reads as "Copyright The GNU Toolchain
Authors" across the source code.
[1] https://sourceware.org/glibc/wiki/Contribution%20checklist
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Put all sources for DSO sorting tests in the dso-sort-tests-src directory
and compile test relocatable objects with
$(objpfx)tst-dso-ordering1-dir/tst-dso-ordering1-a.os: $(objpfx)dso-sort-tests-src/tst-dso-ordering1-a.c
$(compile.c) $(OUTPUT_OPTION)
to avoid random $< values from $(before-compile) when compiling test
relocatable objects with
$(objpfx)%$o: $(objpfx)%.c $(before-compile); $$(compile-command.c)
compile-command.c = $(compile.c) $(OUTPUT_OPTION) $(compile-mkdep-flags)
compile.c = $(CC) $< -c $(CFLAGS) $(CPPFLAGS)
for 3 "make -j 28" parallel builds on a machine with 112 cores at the
same time.
This partially fixes BZ #28550.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Starting from GCC 12, the .init_array and .fini_array sections are enabled
unconditionally by
commit 13a39886940331149173b25d6ebde0850668d8b9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Jun 8 16:09:24 2021 -0700
Always enable DT_INIT_ARRAY/DT_FINI_ARRAY on Linux
configure GCC with --enable-initfini-array to enable them when using GCC
release branches.
Fixes BZ #27945.
This is the first of a 2-part patch set that fixes slow DSO sorting behavior in
the dynamic loader, as reported in BZ #17645. In order to facilitate such a
large modification to the dynamic loader, this first patch implements a testing
framework for validating shared object sorting behavior, to enable comparison
between old/new sorting algorithms, and any later enhancements.
This testing infrastructure consists of a Python script
scripts/dso-ordering-test.py' which takes in a description language, consisting
of strings that describe a set of link dependency relations between DSOs, and
generates testcase programs and Makefile fragments to automatically test the
described situation, for example:
a->b->c->d # four objects linked one after another
a->[bc]->d;b->c # a depends on b and c, which both depend on d,
# b depends on c (b,c linked to object a in fixed order)
a->b->c;{+a;%a;-a} # a, b, c serially dependent, main program uses
# dlopen/dlsym/dlclose on object a
a->b->c;{}!->[abc] # a, b, c serially dependent; multiple tests generated
# to test all permutations of a, b, c ordering linked
# to main program
(Above is just a short description of what the script can do, more
documentation is in the script comments.)
Two files containing several new tests, elf/dso-sort-tests-[12].def are added,
including test scenarios for BZ #15311 and Redhat issue #1162810 [1].
Due to the nature of dynamic loader tests, where the sorting behavior and test
output occurs before/after main(), generating testcases to use
support/test-driver.c does not suffice to control meaningful timeout for ld.so.
Therefore a new utility program 'support/test-run-command', based on
test-driver.c/support_test_main.c has been added. This does the same testcase
control, but for a program specified through a command-line rather than at the
source code level. This utility is used to run the dynamic loader testcases
generated by dso-ordering-test.py.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1162810
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike GCC, Clang parses asm statements and verifies they are valid
instructions/directives. Place the magic @@@ into a comment to avoid
a parse error.
The renaming of installed shared libraries to use the SONAME directly
rather than linking to a versioned name stopped build-many-glibcs.py
--strip (used to facilitate comparing binaries before and after
changes that aren't meant to change any generated code in installed
glibc shared libraries) from stripping most of the installed shared
libraries, because it stripped only the *.so names. Fix it to strip
*.so* names instead and to detect the case of linker scripts using
grep instead of hardcoding particular files that are linker scripts.
Tested with build-many-glibcs.py --strip.
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the shared code now has special status with respect to
copyrights, port them into a more structured format in the source tree
and add a python function that parses and returns a dictionary with
the information.
I need this to exclude these files from the Contributed-by changes and
I reckon it would be useful to know these files for future tooling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The previous approach uses readelf -DWs, which does not produce
a stable output format (older binutils versions do not include
symbol version information). This commit re-uses scripts/abilist.awk
with a tweak to include GLIBC_PRIVATE symbols. This awk script
is based on objdump -T output, which appears to be stable over time.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Some targets have a GLIBC_2.0 baseline for libdl, while using
GLIBC_2.2 for libc. This means that the generated libc.map file
does not have any version nodes for GLIBC_2.0 or GLIBC_2.1. However,
moving symbols from libdl into libc needs such version nodes.
(Future symbol moves from librt will need this as well.)
This kludge is only necessary for symbols predating GLIBC_2.2 because
the affected targets use GLIBC_2.2 as the baseline for libc. Given
the small number and fixed set of affected architectures, no generic
mechanism is implemented, and instead the map file fragment is
hard-coded in scripts/versions.mk.
The compat_symbol macro already emits the appropriate version strings,
so no adjustments are needed there.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This requires that all exported symbol versions are listed in
Versions files. It results in more consistent behavior across
architectures because previously, symbols could be exported
via explicit versioned_symbol and compat_symbol macros if the
version node existed in some Versions file (without listing the
symbol), and it was not the base version for the library (which
already had the local: * directive).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This generates new macros of this from:
They are useful for symbol lookups using _dl_lookup_direct.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch makes build-many-glibcs.py use Linux 5.12 and GCC 11
branch.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
With gdb 10, the pretty printer tests are UNSUPPORTED::
The gdb version string (gdb -v) is incorrectly formatted.
This is observable in:
nptl/test-cond-printers, nptl/test-condattr-printers,
nptl/test-mutex-printers, nptl/test-mutexattr-printers,
nptl/test-rwlock-printers, nptl/test-rwlockattr-printers
After updating the regexp and building with debug-info,
all those tests are passing.
This code adds new flag - '--allow-time-setting' to cross-test-ssh.sh
script to indicate if it is allowed to alter the date on the system
on which tests are executed. This change is supposed to be used with
test systems, which use virtual machines for testing.
The GLIBC_TEST_ALLOW_TIME_SETTING env variable is exported to the
remote environment on which the eligible test is run and brings no
functional change when it is not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The -O option avoids interleaving (e.g.) compiler error messages
with other build messages, and makes attribution of messages to
commands easier.
According to my tests, the impact on build time is within the noise.
With static pie linking pointers in the tunables list need
RELATIVE relocs since the absolute address is not known at link
time. We want to avoid relocations so the static pie self
relocation can be done after tunables are initialized.
This is a simple fix that embeds the tunable strings into the
tunable list instead of using pointers. It is possible to have
a more compact representation of tunables with some additional
complexity in the generator and tunable parser logic. Such
optimization will be useful if the list of tunables grows.
There is still an issue that tunables_strdup allocates and the
failure handling code path is sufficiently complex that it can
easily have RELATIVE relocations. It is possible to avoid the
early allocation and only change environment variables in a
setuid exe after relocations are processed. But that is a
bigger change and early failure is fatal anyway so it is not
as critical to fix right away. This is bug 27181.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The representation of the tunables including type information and
the tunable list structure are only used in the implementation not
in the tunables api that is exposed to usage within glibc.
This patch moves the representation related definitions into the
existing dl-tunable-types.h and uses that only for implementation.
The tunable callback and related types are moved to dl-tunables.h
because they are part of the tunables api.
This reduces the details exposed in the tunables api so the internals
are easier to change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GNU ld and gold have supported --print-output-format since 2011. glibc
requires binutils>=2.25 (2015), so if LD is GNU ld or gold, we can
assume the option is supported.
lld is by default a cross linker supporting multiple targets. It auto
detects the file format and does not need OUTPUT_FORMAT. It does not
support --print-output-format.
By parsing objdump -f, we can support all the three linkers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
This patch makes build-many-glibcs.py use the recent GMP 6.2.1
release.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
The inner loop is called thousands of times per "make check" even
if there's otherwise nothing to do. Avoid calling /bin/head all
those times when a builtin will do.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Support building three variants of 32-bit RISC-V glibc as follows:
- riscv32-linux-gnu-rv32imac-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32d
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
