The conformtest header tests test some things through compilation
tests and others through execution tests. This patch makes more of
the tests into compilation tests, using _Static_assert (note: for
float.h tests on floating-point values this is depending on a GNU
extension, that those assertions are allowed in the absence of
-pedantic although they aren't strictly integer constant expressions).
The remaining execution tests are for values of things listed as
"symbol" (in fact no such things have a value expectation listed) and
for values of macros defined as string constants (three such values
listed in total).
This is intended as preparation for enabling the vast bulk of the
tests to run for cross compilation. (Even the few remaining execution
tests ought in principle to run for cross compilation when a test
wrapper is defined, but that's more complicated. The existing
execution tests for native builds in fact are linked and run with an
existing installed libc that's required to exist to link against,
rather than with the newly built libc; only the new headers are used.)
Tested for x86_64.
* conform/conformtest.pl: Use compilation instead of execution
tests for testing values of constants and usability in #if.
Mark 4 catan and catanh tests as xfail-rounding:ibm128-libgcc.
After this patch all catan and catanh tests pass on ibm128.
Regenerated auto-libm-test-out using gmp 6.1.2, mpfr 3.1.5 and upstream
mpc (9ef8030e50),
Tested on powerpc, powerpc64 and powerpc64le.
* math/auto-libm-test-in: Mark some catan and catanh as
xfail-rounding:ibm128-libgcc.
* math/auto-libm-test-out-catan: Regenerate.
* math/auto-libm-test-out-catanh: Likewise.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.
As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000. I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.
The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed. The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
(__END_NAMESPACE_STD): Likewise.
(__USING_NAMESPACE_STD): Likewise.
(__BEGIN_NAMESPACE_C99): Likewise.
(__END_NAMESPACE_C99): Likewise.
(__USING_NAMESPACE_C99): Likewise.
* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
undefine macro.
(_Mdouble_END_NAMESPACE): Likewise.
* ctype/ctype.h: Do not handle C++ namespaces.
* libio/bits/stdio-ldbl.h: Likewise.
* libio/stdio.h: Likewise.
* locale/locale.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* setjmp/setjmp.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/bits/stdlib-float.h: Likewise.
* stdlib/bits/stdlib-ldbl.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/string.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* time/bits/types/clock_t.h: Likewise.
* time/bits/types/struct_tm.h: Likewise.
* time/bits/types/time_t.h: Likewise.
* time/time.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* wcsmbs/uchar.h: Likewise.
* wcsmbs/wchar.h: Likewise.
[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
* wctype/wctype.h: Do not handle C++ namespaces.
* scripts/begin-end-check.pl: Remove.
* Makefile (installed-headers): Likewise.
(tests-special): Do not add $(objpfx)begin-end-check.out.
($(objpfx)begin-end-check.out): Remove.
When glibc is compiled with gcc 6.2 that has been configured with
to default to PIC/PIE, the static version of __mempcpy_chk is not built,
as the test is done on PIC instead of SHARED. Fix the test to check for
SHARED, like it is done for similar functions like __memcpy_chk.
2017-03-12 Mike Frysinger <vapier@gentoo.org>
* sysdeps/x86_64/mempcpy_chk.S (__mempcpy_chk): Check for SHARED
instead of PIC.
Bug 21094 reports 3ulp errors of cosf and tanf for certain arguments
near pi/2 arising from the use of an insufficiently accurate range
reduction. (To be clear, this is a quality-of-implementation issue
relating to the apparent intent of those particular cosf and tanf
implementations; 3ulp is within the general glibc accuracy goals, so
not inherently a bug.)
This patch fixes that error by making a wider range of cases use the
existing more accurate range reduction for arguments close to pi/2.
The wider range of values is still narrow enough for the "z -=
pio2_2;" in the more accurate case to be exact, as the code expects.
Tested for x86_64, x86 and mips64; no ulps updates needed (but at
least on mips64, the larger ulps were seen if the tests were added
without the substantive fix).
[BZ #21094]
* sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Use
24+24+24-bit pi for wider range of values around pi/2.
* math/auto-libm-test-in: Add more tests of cos and tan.
* math/auto-libm-test-out-cos: Regenerated.
* math/auto-libm-test-out-tan: Likewise.
The test for "-z combreloc" fails when cross-compiling on a machine
that uses BSD grep (e.g. on macos). grep complains about empty
subexpression and exits with non-zero status, which is interpreted
by configure as "not found". As a result, support for "-z combreloc"
(HAVE_Z_COMBRELOC) is not detected, leading to link failure on SPARC.
While there, replace fgrep with 'grep -F', as fgrep is non-POSIX.
* configure.ac: Avoid empty subexpression in grep.
Signed-off-by: Alexey Neyman <stilor@att.net>
This patch fixes multiple issues of test-errno.c (9a56f87183):
- Rename Linux test-errno.c to test-errno-linux.c to avoid build
the same source for both tests.
- Add a mlock check for 32 bits build running on 64 bits kernels.
Althuough man pages states that mlock fails with EINVAL if final
address overflows, kernels does not return it for aforementioned
condition (it returns ENOMEM instead). Although it seems to be
a kernel issue for compat syscall handling, I think it is worth
to still check syscall return and document the behavior.
- Initialize option lenght for setsockopt check.
- Change open test from EINVAL to EISDIR.
Checked on x86_64-linux-gnu and i686-linux-gnu (running on 64 bits
kernel).
* posix/test-errno.c (do_test): Initialize setsockopt optlen.
* sysdeps/unix/sysv/linux/test-errno.c: Move to ...
* sysdeps/unix/sysv/linux/test-errno-linux.c: ... here.
(test_wrp_rv): Fix format.
(test_wrp_rv2): New macro.
(do_test): Handle mlock return on 64 bits kernels with 32 bits
binaries.
x86_64 libmvec tests have been failing to build lately with GCC
mainline with -Wuninitialized errors, and Markus Trippelsdorf traced
this to an aliasing issue
<https://sourceware.org/ml/libc-alpha/2017-03/msg00169.html>.
This patch fixes the aliasing issue, so that the vectors-of-pointers
are initialized using a union instead of pointer casts. This also
fixes the testsuite build failures with GCC mainline.
Tested for x86_64 (full testsuite with GCC 6; testsuite build with GCC
mainline with build-many-glibcs.py).
* sysdeps/x86/fpu/test-math-vector-sincos.h (INIT_VEC_PTRS_LOOP):
Use a union when storing pointers.
(VECTOR_WRAPPER_fFF_2): Do not take address of integer vector and
cast result when passing to INIT_VEC_PTRS_LOOP.
(VECTOR_WRAPPER_fFF_3): Likewise.
(VECTOR_WRAPPER_fFF_4): Likewise.
The classification macros: finite, fpclassify, iseqsig, isinf, isnan,
issignaling, and signbit are defined by ISO C11 and declared in
mathcalls.h for each of the floating-point types: float, double, and
long double.
TS 18661-3 does not mention these macros for float128, however support
for them must be present when _Float128 is present. This is true,
even when the feature test macro __STDC_WANT_IEC_60559_TYPES_EXT__ is
false. Other function declarations in mathcalls.h, on the other hand,
depend on __STDC_WANT_IEC_60559_TYPES_EXT__.
This patch splits the helper functions (__finite, __fpclassify,
__iseqsig, __isinf, __isnan, __issignaling, and __signbit) from
mathcalls.h, so that these helper functions can be declared for
_Float128, even when __STDC_WANT_IEC_60559_TYPES_EXT__ is false.
Tested for powerpc64le, s390x, and x86_64.
* include/bits/mathcalls-helper-functions.h: New file.
* math/Makefile (headers): Add bits/mathcalls-helper-functions.h.
* math/bits/mathcalls.h (__finite, __fpclassify, __iseqsig)
(__isinf, __isnan, __issignaling, __signbit): Move declarations to
math/bits/mathcalls-helper-functions.h.
* math/bits/mathcalls-helper-functions.h: New file.
* math/math.h: Include bits/mathcalls-helper-functions.h for
float, double, and long double.
Replace the use of feraiseexcept with __feraiseexcept in the helper
function __iseqsig (math/s_iseqsig_template.c).
Tested for powerpc64le, s390x, and x86_64.
* math/s_iseqsig_template.c (__iseqsig): Use __feraiseexcept
instead of feraiseexcept.
Before this change, the loop iterating over RRs in the answer
section stopped at the first CNAME record, never printing them.
The CNAME and PTR record contents was extracted from the wrong
buffer (whole packet instead RDATA). This desynced the parsing
after the first CNAME or PTR record.
Also fix the AAAA record parsing by checking their sizes.
This patch fixes the missing posix_fadvise64 symbol for static build
required for _FILE_OFFSET_BITS=64 on mips64 build.
Checked on a mips64-linux-gnu build with run-built-tests=no.
[BZ #21232]
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c: Add
posix_fadvise64 weak_alias for static build.
Thanks David Michael for the suggestion.
* sysdeps/mach/hurd/send.c (__send): Convert hurdish error code into
posix error code.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
Now with d40dbe7 SH build does not require more the no_isolate gcc
options to correct build glibc (since SH build now does not generate
a trap anymore). This patch removes the unrequired options from
SH config.
Checked with a build for sh3-linux-gnu, sh3eb-linux-gnu, sh4-linux-gnu,
and sh4eb-linux-gnu.
* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
no_isolate usage for SH.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
Linux 4.10 adds IPV6_RECVFRAGSIZE to include/uapi/linux/in6.h, which
shows that several such IPV6_* macros are missing from glibc's
sysdeps/unix/sysv/linux/bits/in.h (while older ones are present). I
don't know whether any of these might be deliberately omitted, but
this patch adds what appear to be the missing more recent macros to
glibc.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_AUTOFLOWLABEL): New
macro.
(IPV6_ADDR_PREFERENCES): Likewise.
(IPV6_MINHOPCOUNT): Likewise.
(IPV6_ORIGDSTADDR): Likewise.
(IPV6_RECVORIGDSTADDR): Likewise.
(IPV6_TRANSPARENT): Likewise.
(IPV6_UNICAST_IF): Likewise.
(IPV6_RECVFRAGSIZE): Likewise.
Build glibc for sh4-unknown-linux-gnu currently fails if one's
using GCC5/6: in dl-conflict.c, the elf_machine_rela() function
is called with NULL as its 3rd argument, sym. The implementation
of that function in sysdeps/sh/dl-machine.h dereferences that pointer:
const Elf32_Sym *const refsym = sym;
...
if (map == &GL(dl_rtld_map))
value -= map->l_addr + refsym->st_value + reloc->r_addend;
GCC discovers a null pointer dereference, and in accordance with
-fdelete-null-pointer-checks (which is enabled in -O2) replaces this
code with a trap - which, as SH does not implement a trap pattern in
GCC, evaluates to an abort() call. This abort() call pulls many more
objects from libc_nonshared.a, eventually resulting in link failure
due to multiple definitions for a number of symbols.
As far as I see, the conditional before this code is always false in
rtld: _dl_resolve_conflicts() is called with main_map as the first
argument, not GL(_dl_rtld_map), but since that call is in yet another
compilation unit, GCC does not know about it. Patch that wraps this
conditional into !defined RESOLVE_CONFLICT_FIND_MAP attached.
* sysdeps/sh/dl-machine.h (elf_machine_rela): The condition
in R_SH_DIR32 case is always false when inlined from
dl-conflict.c. Ifdef out to prevent GCC from insertin an
abort() call.
Fix 60f9423b type for alpha kernel-features.h definition.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): Replace duplicate by
__ASSUME_SEND_SYSCALL.
librpcsvc.a should not be installed, too.
* sunrpc/Makefile: don't build and install rpcsvc header
files, rpcgen and librpcsvc.a by default.
Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
I've used gmp 6.1.2, mpfr 3.1.5 and upstream mpc with fix in mpc_atan
(https://scm.gforge.inria.fr/anonscm/gitweb?p=mpc/mpc.git;a=commit;h=958aac9b15a659d6fb5edcb11778123f8a35b14f)
to build gen-auto-libm-tests and regenerated catan / catanh out files.
Regenerated ULPs for s390 from scratch. Now the catan / catanh tests
are passing.
ChangeLog:
* math/auto-libm-test-out-catan: Regenerated.
* math/auto-libm-test-out-catanh: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
This patch regenerates MIPS catan and catanh ulps for long double with
fixed expected results for the tests of those functions. ulps for
other types (which may see variation depending on whether glibc is
built for a processor with fused multiply-add support) are
deliberately not reduced. ulps are not regenerated for powerpc-nofpu
as such regeneration does not result in any changes for long double.
* sysdeps/mips/mips64/libm-test-ulps: Update catan and catanh ulps
for long double with corrected test expectations.
This patch consolidates the send Linux syscall implementation on
sysdeps/unix/sysv/linux/send{to}.c. The changes are:
1. Remove send from auto-generation syscalls.list on the architecture
that uses __NR_send.
2. Define __NR_send for architectures that supports it. It was done instead
of defining in default kernel-features.h because current Linux practice
for new ports are to implement only __NR_sendto [1] and it will
require adding new kernel-features for ports that do not require it
(aarch64 for instance).
3. Remove __ASSUME_SENDTO_FOR_SEND_SYSCALL and decide to use
__NR_sendto for send generation based on __ASSUME_SENDTO_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/sysdep.h (HAVE_INTERNAL_SEND_SYMBOL):
Define.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Undefine.
* sysdeps/unix/sysv/linux/nios2/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): Define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove send from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewike.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/send.c: Simplify includes.
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Replace by
__ASSUME_SENDTO_SYSCALL.
* sysdeps/unix/sysv/linux/x86_64/send.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/send.c: Likewise.
* sysdeps/unix/sysv/linux/generic/send.c: Likewise.
This patch consolidates the recv Linux syscall implementation on
sysdeps/unix/sysv/linux/recv.c. The changes are:
1. Remove recv from auto-generation syscalls.list on the architecture
that uses __NR_recv.
2. Define __NR_recv for architectures that supports it. It was done
instead of defining in default kernel-features.h because current Linux
practice for new ports is to implement only __NR_recvfrom [1] and it will
require adding new kernel-features for ports that do not require it
(aarch64 for instance).
3. Remove __ASSUME_RECVFROM_FOR_RECV_SYSCALL and decide to use
__NR_recvfrom for recv generation based on __ASSUME_RECVFROM_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove recv from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): New define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/generic/recv.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/recv.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/recv.c: Likewise.
* sysdeps/unix/sysv/linux/recv.c: Simplify includes.
(__libc_recv): Use __ASSUME_RECVFROM_SYSCALL instead of
__ASSUME_RECVFROM_FOR_RECV_SYSCALL to issue recvfrom syscall.
[1] include/asm-generic/unistd.h (__ARCH_WANT_SYSCALL_DEPRECATED)
This patch consolidates the connect Linux syscall implementation on
sysdeps/unix/sysv/linux/accept.c. The changes are:
1. Remove connect from auto-generation syscalls.list on the architecture
that uses __NR_connect.
2. Define __NR_connect as default (__ASSUME_CONNECT_SYSCALL) and undef for
architectures that do not support it.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove connect from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/connect.c: Simplify include list.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Define.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Undef if kernel does not support it.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
This patch consolidates the accept Linux syscall implementation on
sysdeps/unix/sysv/linux/accept.c. The changes are:
1. Remove accept from auto-generation syscalls.list on the architecture
that uses __NR_accept.
2. Define __NR_accept as default (__ASSUME_ACCEPT_SYSCALL) and undef for
architectures that do not support it.
3. Remove __ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL and decide to use
__NR_accept4 for accept generation based on __ASSUME_ACCEPT4_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/accept.c (__libc_accept): Replace
__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL by __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove accept from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): New define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Define wheter kernel version supports.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Define.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine for 32 bits.
This patch adds tests for POSIX and Linux specific syscalls
that implemented with syscall templates machinery. The reason
of tests is to receive the expected error code and test if
it's handled properly by glibc.
2017-03-08 Yury Norov <ynorov@caviumnetworks.com>
Zack Weinberg <zackw@panix.com>
* posix/test-errno.c: New file.
* posix/Makefile (tests): Add test-errno.
* sysdeps/unix/sysv/linux/test-errno.c: New file.
* sysdeps/unix/sysv/linux/Makefile (tests): Add test-errno.
The LD_HWCAP_MASK environment variable may alter the selection of
function variants for some architectures. For AT_SECURE process it
means that if an outdated routine has a bug that would otherwise not
affect newer platforms by default, LD_HWCAP_MASK will allow that bug
to be exploited.
To be on the safe side, ignore and disable LD_HWCAP_MASK for setuid
binaries.
[BZ #21209]
* elf/rtld.c (process_envvars): Ignore LD_HWCAP_MASK for
AT_SECURE processes.
* sysdeps/generic/unsecvars.h: Add LD_HWCAP_MASK.
* elf/tst-env-setuid.c (test_parent): Test LD_HWCAP_MASK.
(test_child): Likewise.
* elf/Makefile (tst-env-setuid-ENV): Add LD_HWCAP_MASK.
In 1e5834c38a ("Refactor Linux ipc_priv header") a different
approach to passing __IPC_64 as zero was created. Hppa kernel ABI
requires to oass __IPC_64 as zero since it does not set
CONFIG_ARCH_WANT_IPC_PARSE_VERSION in the kernel.
Checked on hppa-linux-gnu with some adjustments to avoid BZ#21016
(basically by removing hppa compat implementations and adjusting
required headers).
* sysdeps/unix/sysv/linux/hppa/ipc_priv.h: New file.
This patch activates C11 atomic builtins by defining
USE_ATOMIC_COMPILER_BUILTINS to 1.
Note:
E.g. in nptl/pthread_key_delete.c if compiled with GCCs 6 and before,
an extra stack-frame is generated and the old value is stored on stack
before cs instruction but it never loads this value from stack.
An unreleased GCC 7 omit those stack operations.
E.g. in nptl/pthread_once.c the condition code of cs instruction is
evaluated by a sequence of ipm, sra, compare and jump instructions instead
of one conditional jump instruction. This also occurs with an unreleased
GCC 7.
These shortcomings does not really hurt. Nevertheless, the gcc guys are
investigating those ones and plan to fix them before GCC 7 release.
The atomic_fetch_abc_def C11 builtins are now using load-and-abc instructions
on z196 zarch and higher cpus instead of a loop with compare-and-swap
instruction.
Some of the non-C11 atomic macros from include/atomic.h are now implemented
with help of the C11 atomic builtins. The other non-C11 atomic macros
are using the macros defined here.
ChangeLog:
* sysdeps/s390/atomic-machine.h
(USE_ATOMIC_COMPILER_BUILTINS): Define to 1.
(__arch_compare_and_exchange_val_8_acq,
__arch_compare_and_exchange_val_16_acq,
__arch_compare_and_exchange_val_32_acq,
__arch_compare_and_exchange_val_64_acq):
Delete macro.
(atomic_compare_and_exchange_val_acq,
atomic_compare_and_exchange_val_rel,
atomic_compare_and_exchange_bool_acq,
catomic_compare_and_exchange_bool_acq,
atomic_exchange_acq, atomic_exchange_rel,
atomic_exchange_and_add_acq,
atomic_exchange_and_add_rel,
catomic_exchange_and_add, atomic_or_val,
atomic_or, catomic_or, atomic_bit_test_set,
atomic_and_val, atomic_and, catomic_and):
Define macros with help of C11 atomic builtins.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
