mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-04 10:50:07 +00:00
5e9d98a3d9
20 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joseph Myers
|
5e9d98a3d9 |
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
1e7c8fcca5 |
Add iseqsig.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
ec94343f59 |
Add femode_t functions.
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
780257d48d |
Add fetestexceptflag.
TS 18661-1 defines an fetestexceptflag function to test the exception state saved in an fexcept_t object by fegetexceptflag. This patch implements this function for glibc. Almost all architectures save exception state in such a way that it can be directly ANDed with exception flag bits, so rather than having lots of fetestexceptflag implementations that all do the same thing, the math/ implementation is made to use this generic logic (which is also OK in the fallback case where FE_ALL_EXCEPT is zero). The only architecture that seems to need anything different is s390. (fegetexceptflag and fesetexceptflag use abbreviated filenames fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned by 14-character filename limits, fetestexceptflag uses the obvious filename fetestexceptflag.c.) The NEWS entry is intended to be expanded along the lines given in <https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when fegetmode and fesetmode are added. Tested for x86_64, x86, mips64 and powerpc. * math/fetestexceptflag.c: New file. * sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by Stefan Liebler. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fetestexceptflag): New function declaration. * manual/arith.texi (fetestexceptflag): Document function. * math/Versions (fetestexceptflag): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fetestexceptflag. (tests): Add test-fetestexceptflag. * math/test-fetestexceptflag.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
5146356f5a |
Add fesetexcept.
TS 18661-1 defines an fesetexcept function for setting floating-point exception flags without the side-effect of causing enabled traps to be taken. This patch series implements this function for glibc. The present patch adds the fallback stub implementation, x86 and x86_64 implementations, documentation, tests and ABI baseline updates. The remaining patches, some of them untested, add implementations for other architectures. The implementations generally follow those of the fesetexceptflag function. As for fesetexceptflag, the approach taken for architectures where setting flags causes enabled traps to be taken is to set the flags (and potentially cause traps) rather than refusing to set the flags and returning an error. Since ISO C and TS 18661 provide no way to enable traps, this is formally in accordance with the standards. The NEWS entry should be considered a placeholder, since this patch series is intended to be followed by further such series adding other TS 18661-1 features, so that the NEWS entry would end up looking more like * New <fenv.h> features from TS 18661-1:2014 are added to libm: the fesetexcept, fetestexceptflag, fegetmode and fesetmode functions, the femode_t type and the FE_DFL_MODE macro. with hopefully more such entries for other features, rather than having an entry for a single function in the end. I believe we have consensus for adding TS 18661-1 interfaces as per <https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>. Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). * math/fesetexcept.c: New file. * sysdeps/i386/fpu/fesetexcept.c: Likewise. * sysdeps/x86_64/fpu/fesetexcept.c: Likewise. * math/fenv.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function declaration. * manual/arith.texi (fesetexcept): Document function. * math/Versions (fesetexcept): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fesetexcept. (tests): Add test-fesetexcept and test-fesetexcept-traps. * math/test-fesetexcept.c: New file. * math/test-fesetexcept-traps.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Zack Weinberg
|
63eb8df85a |
Minimize sysdeps code involved in defining major/minor/makedev.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would
mean that the deprecation logic coming up in the next patch would have
to be written twice (in generic/ and unix/sysv/linux/). To avoid that,
hoist all but the unavoidably system-dependent logic to misc/, leaving a
bits/ header behind. This also promotes the Linux-specific encoding of
dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t,
to generic, as glibc's dev_t is always 64 bits wide.
The former Linux implementation used inline functions to avoid evaluating
arguments more than once. After this change, all platforms use inline
functions, which means that three new symbols are added to the generic ABI.
(These symbols are in the user namespace, which is how they have always
been on Linux. They begin with "gnu_dev_", so collisions with user code
are pretty unlikely.)
New ports henceforth need only provide a bits/sysmacros.h defining
internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}.
This is only necessary if the kernel encoding is incompatible with
the now-generic encoding (for instance, it would be necessary for
FreeBSD).
While I was at it, I added a basic round-trip test for these functions.
* sysdeps/generic/sys/sysmacros.h: Delete file.
* sysdeps/unix/sysv/linux/makedev.c: Delete file.
* sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ...
* bits/sysmacros.h: ... here; this encoding is now the generic
encoding. Now defines only the following macros:
__SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR,
__SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR,
__SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV.
* misc/sys/sysmacros.h, misc/makedev.c: New files that use
bits/sysmacros.h and the above new macros to generate the
public implementations of major, minor, and makedev.
* misc/tst-makedev.c: New test.
* include/sys/sysmacros.h: New wrapper.
* misc/Makefile (headers): Add sys/sysmacros.h, bits/sysmacros.h.
(routines): Add makedev.
(tests): Add tst-makedev.
* misc/Versions [GLIBC_2.25]: Add gnu_dev_major, gnu_dev_minor,
gnu_dev_makedev.
* posix/Makefile (headers): Remove sys/sysmacros.h.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove makedev.
* sysdeps/arm/nacl/libc.abilist: Add GLIBC_2.25,
gnu_dev_major, gnu_dev_makedev, gnu_dev_minor.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add GLIBC_2.25.
|
||
Rajalakshmi Srinivasaraghavan
|
41a359e22f |
Add nextup and nextdown math functions
TS 18661 adds nextup and nextdown functions alongside nextafter to provide support for float128 equivalent to it. This patch adds nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf to libm before float128 support. The nextup functions return the next representable value in the direction of positive infinity and the nextdown functions return the next representable value in the direction of negative infinity. These are currently enabled as GNU extensions. |
||
Adhemerval Zanella
|
78880cc185 |
Revert {send,sendm,recv,recvm}msg conformance changes
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits
|
||
Carlos O'Donell
|
47dd3543d3 |
Bug 20198: quick_exit should not call destructors.
In C++11 18.5.12 says "Objects shall not be destroyed as a result of calling quick_exit." In C11 quick_exit is silent about thread object destruction. Therefore to make glibc C++ compliant we do not call any thread local destructors. A new regression test verifies the fix. I will note that C++11 18.5.3 makes it clear that C++ defines additional requirements for _Exit() to prevent it from executing destructors. Given that the point of _Exit() is to terminate the process immediately it makes sense the C and C++ should line up and avoid calling destructors. No failures. New regtest passes. |
||
|
Adhemerval Zanella
|
af7f7c7ec8 |
network: recvmsg and sendmsg standard compliance (BZ#16919)
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen to be of size int and socklen_t respectively. However Linux defines it as both size_t and for 64-bit it requires some adjustments to make the functions standard compliance. This patch fixes it by creating a temporary header and zeroing the pad fields for 64-bits architecture where size of size_t exceeds the size of the int. Also the new recvmsg and sendmsg implementation is only added on libc, with libpthread only containing a compat symbol. Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * conform/data/sys/socket.h-data (msghdr.msg_iovlen): Remove xfail- and change to correct expected type. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. * sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Fix expected POSIX assumption about the size. (msghdr.msg_controllen): Likewise. (msghdr.__glibc_reserved1): Likewise. (msghdr.__glibc_reserved2): Likewise. (cmsghdr.cmsg_len): Likewise. (cmsghdr.__glibc_reserved1): Likewise. * nptl/Makefile (libpthread-routines): Remove ptw-recvmsg and ptw-sendmsg. Add ptw-oldrecvmsg and ptw-oldsendmsg. (CFLAGS-sendmsg.c): Remove rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Add rule. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24): Add recvmsg and sendmsg. * sysdeps/unix/sysv/linux/aarch64/Version [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/arm/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/ia64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/x86_64/64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/x84_64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = socket)] (sysdep_headers): Add oldrecvmsg and oldsendmsg. (CFLAGS-sendmsg.c): Add rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/check_native.c (__check_native): Fix msghdr initialization. * sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise. * sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise. * sysdeps/unix/sysv/linux/oldrecvmsg.c: New file. * sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmsg.c (__libc_recvmsg): Adjust msghdr iovlen and controllen fields to adjust to POSIX specification. * sysdeps/unix/sysv/linux/sendmsg.c (__libc_sendmsg): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: New version and added recvmsg and sendmsg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdepe/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. Likewise. Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. |
||
|
Joseph Myers
|
f7a9f785e5 | Update copyright dates with scripts/update-copyrights. | ||
Chris Metcalf
|
e59c94fa0e |
math: add LDBL_CLASSIFY_COMPAT support
If a platform does not define "long-double-fcts = yes" in its Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed headers, it will currently create exported symbols for __finitel, __isinfl, and __isnanl that can't be reached from userspace by correct use of the finite(), isinf(), or isnan() macros in <math.h>. To avoid this situation, by default for such platforms we now no longer export these symbols, thus causing appropriate link-time errors. However, for platforms that previously exported these symbols, we continue to do so as compat symbols; this is enabled by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform. For tile, remove the now-unnecessary exports of those functions from libc and libm. |
||
|
Chris Metcalf
|
6a4448afe3 |
tile: define __NO_LONG_DOUBLE_MATH
This avoids build failures in the tests, and matches what is in bits/mathdef.h. Update the libc and libm abilist files to include __finitel, __isinfl, and __isnanl. |
||
|
Joseph Myers
|
d709042a6e |
Fix lgamma setting signgam for ISO C (bug 15421).
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the signgam variable even when building for strict ISO C conformance (-std=c99 / -std=c11), although the user may define such a variable and it's only in the implementation namespace for POSIX with XSI extensions enabled. Following discussions starting at <https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and <https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems that the safest approach for fixing this particular issue is for signgam to become a weak alias for a newly exported symbol __signgam, with the library functions only setting __signgam, at which point static linker magic will preserve the alias for newly linked binaries that refer to the library's signgam rather than defining their own, while breaking the alias for programs that define their own signgam, with new symbol versions for lgamma functions and with compat symbols for existing binaries that set both signgam and __signgam. This patch implements that approach for the fix. signgam is made into a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal get new symbol versions at version GLIBC_2.23, with the existing versions of lgamma, lgammaf and lgammal becoming compat symbols. When the compat versions are built, gamma, gammaf and gammal are aliases for the compat versions (i.e. always set signgam); this is OK as they are not ISO C functions, and avoids adding new symbol versions for them unnecessarily. When the compat versions are not built (i.e. for static linking and for future glibc ports), gamma, gammaf and gammal are aliases for the new versions that set __signgam. The ldbl-opt versions are updated accordingly. The lgamma wrappers are adjusted so that the same source files, included from different files with different definitions of USE_AS_COMPAT, can build either the new versions or the compat versions. Similar changes are made to the ia64 versions (untested). Tests are added that the lgamma functions do not interfere with a user variable called signgam for ISO C, with various choices for the size of that variable, whether it is initialized, and for static and dynamic linking. The conformtest whitelist entry is removed as well. Tested for x86_64, x86, mips64 and powerpc, including looking at objdump --dynamic-syms output to make sure the expected sets of symbols were aliases. Also spot-tested that a binary built with old glibc works properly (i.e. gets signgam set) when run with new glibc. [BZ #15421] * sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam, initialize with 0 and define as weak alias of __signgam. * include/math.h [!_ISOMAC] (__signgam): Declare. * math/Makefile (libm-calls): Add w_lgamma_compat. (tests): Add test-signgam-uchar, test-signgam-uchar-init, test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and test-signgam-ullong-init. (tests-static): Add test-signgam-uchar-static, test-signgam-uchar-init-static, test-signgam-uint-static, test-signgam-uint-init-static, test-signgam-ullong-static and test-signgam-ullong-init-static. (CFLAGS-test-signgam-uchar.c): New variable. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. * math/Versions (libm): Add GLIBC_2.23. * math/lgamma-compat.h: New file. * math/test-signgam-main.c: Likewise. * math/test-signgam-uchar-init-static.c: Likewise. * math/test-signgam-uchar-init.c: Likewise. * math/test-signgam-uchar-static.c: Likewise. * math/test-signgam-uchar.c: Likewise. * math/test-signgam-uint-init-static.c: Likewise. * math/test-signgam-uint-init.c: Likewise. * math/test-signgam-uint-static.c: Likewise. * math/test-signgam-uint.c: Likewise. * math/test-signgam-ullong-init-static.c: Likewise. * math/test-signgam-ullong-init.c: Likewise. * math/test-signgam-ullong-static.c: Likewise. * math/test-signgam-ullong.c: Likewise. * math/w_lgamma.c: Rename to w_lgamma_main.c and replace by wrapper of w_lgamma_main.c. * math/w_lgamma_compat.c: New file. * math/w_lgamma_compatf.c: Likewise. * math/w_lgamma_compatl.c: Likewise. * math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA. * math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by wrapper of w_lgammaf_main.c. * math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA. * math/w_lgammal.c: Rename to w_lgammal_main.c and replace by wrapper of w_lgammal_main.c. * math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA. * sysdeps/ia64/fpu/lgamma-compat.h: New file. * sysdeps/ia64/fpu/w_lgamma.c: Move to .... * sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA. (__ieee754_gamma): Define as alias. * sysdeps/ia64/fpu/w_lgammaf.c: Move to .... * sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA. (__ieee754_gammaf): Define as alias. * sysdeps/ia64/fpu/w_lgammal.c: Move to .... * sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA. (__ieee754_gammal): Define as alias. * sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include <math/w_lgamma_compat.c>. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat): Define as alias of __lgamma_compat and use in defining lgammal. * sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include <math/lgamma-compat.h> and <math/w_lgamma_compatl.c>. (USE_AS_COMPAT): New macro. (LGAMMA_OLD_VER): Undefine and redefine. (lgammal): Do not define here. (gammal): Only define here if [GAMMA_ALIAS]. * conform/linknamespace.pl (@whitelist): Remove signgam. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Florian Weimer
|
8c77b6ad40 |
Simplify the abilist format
The new format lists the version on each line, as in:
VERSION SYMBOL TYPE [VALUE]
This makes it easier to process the files with line-oriented tools.
The abilist files were converted with this awk script:
/^[^ ]/ { version = $1 }
/^ / { print version, substr($0, 2) }
And sorted under the "C" locale with sort.
|
||
Mark Wielaard
|
8b7b7f75d9 |
Add LFS support for fts functions (bug 11460)
fts didn't have large-file support yet and fts.h had an #error preventing usage when _FILE_OFFSET_BITS was set. This required nasty workarounds for programs using fts with LFS. This patch implements LFS support for fts by adding FTS64 and FTENT64 variants plus fts64 functions. Which are simple aliases for 64bit off_t arches. Also includes a simple testcase for some of the fts functions with or without LFS enabled. [BZ #11460] * io/Makefile (routines): Add fts64. (tests): Add tst-fts and tst-fts-lfs. (CFLAGS-fts64.c): New. * io/Versions (GLIBC_2.23): New. * io/fts.c: Replace FTS with FTSOBJ, FTSENT with FTSENTRY. Use function defines FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET and FTS_CHILDREN. Define FTSOBJ, FTSENTRY, FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET, FTS_CHILDREN, INO_T, STAT and LSTAT if necessary. * io/fts.h (FTS64): New if _USE_LARGEFILE64. (FTSENT64): Likewise. (fts64_children): Likewise. (fts64_close): Likewise. (fts64_open): Likewise. (fts64_read): Likewise. (fts64_set): Likewise. * io/fts64.c: New file. * io/tst-fts.c: New test. * io/tst-fts-lfs.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.23): Add GLIBC_2.23, fts64_children, fts64_close, fts64_open, fts64_read and fts64_set. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/wordsize-64/fts.c: New file. * sysdeps/wordsize-64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts.c: likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts64.c: likewise. |
||
Adhemerval Zanella
|
fdb7d390dd |
libio: fmemopen rewrite to POSIX compliance
This patch added a new fmemopen version, for glibc 2.22, that aims to be POSIX complaint. It fixes some long-stading glibc fmemopen issues, such as: * it changes the way fseek with SEEK_END works on fmemopen to seek relative to buffer size instead of first '\0'. This is default mode and 'b' opening mode does not change internal behavior (bz#6544). * fix apending opening mode to use as start position either first null byte of len specified in function call (bz#13152 and #13151). * remove binary option 'b' and internal different handling (bz#12836) * fix seek/SEE_END with negative values (bz#14292). A compatibility symbol is provided to with old behavior for older symbols version (2.2.5). * include/stdio.h (fmemopen): Remove hidden prototype. (__fmemopen): Add new hidden prototype. * libio/Makefile: Add oldfmemopen object. * libio/Versions [GLIBC_2.22]: Add new fmemopen symbol. * libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX compliance. * libio/oldfmemopen.c: New file: old fmemopen implementation for symbol compatibility. * stdio-common/Makefile [tests]: Add new tst-fmemopen3. * stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of fmemopen. * stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus on append and read mode. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add fmemopen. * sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise. |
||
|
Joseph Myers
|
b168057aaa | Update copyright dates with scripts/update-copyrights. | ||
Chris Metcalf
|
2d0fc4dcfc | tile: move sysdeps/unix/sysv/linux/tile nptl files. | ||
|
Chris Metcalf
|
4372980f58 |
Move tilegx, tilepro, and linux-generic from ports to libc.
I've moved the TILE-Gx and TILEPro ports to the main sysdeps hierarchy,
along with the linux-generic ports infrastructure. Beyond the README
update, the move was just
git mv ports/sysdeps/tile sysdeps/tile
git mv ports/sysdeps/unix/sysv/linux/tile \
sysdeps/unix/sysv/linux/tile
git mv ports/sysdeps/unix/sysv/linux/generic \
sysdeps/unix/sysv/linux/generic
I updated the relevant ChangeLogs along the lines of the ARM move
in commit
|