The CORE-MATH implementation is correctly rounded (for any rounding mode)
and shows better performance compared to the generic exp10m1f.
The code was adapted to glibc style and to use the definition of
math_config.h (to handle errno, overflow, and underflow). I mostly
fixed some small issues in corner cases (sNaN handling, -INFINITY,
a specific overflow check).
Benchtest on x64_64 (Ryzen 9 5900X, gcc 14.2.1), aarch64 (Neoverse-N1,
gcc 13.3.1), and powerpc (POWER10, gcc 13.2.1):
Latency master patched improvement
x86_64 45.4690 49.5845 -9.05%
x86_64v2 46.1604 36.2665 21.43%
x86_64v3 37.8442 31.0359 17.99%
i686 121.367 93.0079 23.37%
aarch64 21.1126 15.0165 28.87%
power10 12.7426 8.4929 33.35%
reciprocal-throughput master patched improvement
x86_64 19.6005 17.4005 11.22%
x86_64v2 19.6008 11.1977 42.87%
x86_64v3 17.5427 10.2898 41.34%
i686 59.4215 60.9675 -2.60%
aarch64 13.9814 7.9173 43.37%
power10 6.7814 6.4258 5.24%
The generic implementation calls __ieee754_exp10f which has an
optimized version, although it is not correctly rounded, which is
the main culprit of the the latency difference for x86_64 and
throughp for i686.
Signed-off-by: Alexei Sibidanov <sibid@uvic.ca>
Signed-off-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
The CORE-MATH implementation is correctly rounded (for any rounding mode).
This can be checked by exhaustive tests in a few minutes since there are
less than 2^32 values to check against for example GNU MPFR.
This patch also adds some bench values for tgammaf.
Tested on x86_64 and x86 (cfarm26).
With the initial GNU libc code it gave on an Intel(R) Core(TM) i7-8700:
"tgammaf": {
"": {
"duration": 3.50188e+09,
"iterations": 2e+07,
"max": 602.891,
"min": 65.1415,
"mean": 175.094
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.30825e+09,
"iterations": 5e+07,
"max": 211.592,
"min": 32.0325,
"mean": 66.1649
}
}
With the initial GNU libc code it gave on cfarm26 (i686):
"tgammaf": {
"": {
"duration": 3.70505e+09,
"iterations": 6e+06,
"max": 2420.23,
"min": 243.154,
"mean": 617.509
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.24497e+09,
"iterations": 1.8e+07,
"max": 1238.15,
"min": 101.155,
"mean": 180.276
}
}
Signed-off-by: Alexei Sibidanov <sibid@uvic.ca>
Signed-off-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Changes in v2:
- include <math.h> (fix the linknamespace failures)
- restored original benchtests/strcoll-inputs/filelist#en_US.UTF-8 file
- restored original wrapper code (math/w_tgammaf_compat.c),
except for the dealing with the sign
- removed the tgammaf/float entries in all libm-test-ulps files
- address other comments from Joseph Myers
(https://sourceware.org/pipermail/libc-alpha/2024-July/158736.html)
Changes in v3:
- pass NULL argument for signgam from w_tgammaf_compat.c
- use of math_narrow_eval
- added more comments
Changes in v4:
- initialize local_signgam to 0 in math/w_tgamma_template.c
- replace sysdeps/ieee754/dbl-64/gamma_productf.c by dummy file
Changes in v5:
- do not mention local_signgam any more in math/w_tgammaf_compat.c
- initialize local_signgam to 1 instead of 0 in w_tgamma_template.c
and added comment
Changes in v6:
- pass NULL as 2nd argument of __ieee754_gammaf_r in
w_tgammaf_compat.c, and check for NULL in e_gammaf_r.c
Changes in v7:
- added Signed-off-by line for Alexei Sibidanov (author of the code)
Changes in v8:
- added Signed-off-by line for Paul Zimmermann (submitted of the patch)
Changes in v9:
- address comments from review by Adhemerval Zanella
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
Generated on a Cavium Octeon III 2 board running Linux version 4.19.249
and GCC 13.1.0.
Needed due to commit cf7ffdd8a5 ("added pair of inputs for hypotf in
binary32").
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove the wordsize-64 implementations by merging them into the main dbl-64
directory. The second patch just moves all wordsize-64 files and removes a
few wordsize-64 uses in comments and Implies files.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
With mathinline removal there is no need to keep building and testing
inline math tests.
The gen-libm-tests.py support to generate ULP_I_* is removed and all
libm-test-ulps files are updated to longer have the
i{float,double,ldouble} entries. The support for no-test-inline is
also removed from both gen-auto-libm-tests and the
auto-libm-test-out-* were regenerated.
Checked on x86_64-linux-gnu and i686-linux-gnu.
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Passes buildmanyglibc.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
MIPS soft-float glibc does not support floating-point exceptions and
rounding modes, and uses a different ABI from hard-float so a
soft-float compilation cannot use a glibc that does support
floating-point exceptions and rounding modes. Thus, bits/fenv.h
should not, when compiling for soft-float, define macros for the
unsupported features.
This patch changes it accordingly to define those macros only for
hard-float. None of the exception macros are defined for soft-float,
with FE_ALL_EXCEPT defined to 0 in that case, and only FE_TONEAREST is
defined of the rounding-mode macros, and FE_NOMASK_ENV is not defined;
this is consistent with how architectures lacking exception and
rounding mode support generally define things in this header. As well
as making the header more correct for this case, this also means the
generic math_private.h optimizations for this case automatically apply
(inlining libm-internal fenv.h function calls that are trivial when
exceptions and rounding modes are not supported).
The mips64 sfp-machine.h then needs similar changes to disable more of
the exception and rounding mode handling for soft-float. (The mips32
sfp-machine.h is already used only for soft-float, has no integration
with hardware exceptions or rounding modes and so needs no changes.)
Existing binaries might use the old FE_NOMASK_ENV value as an argument
to fesetenv / feupdateenv and expect an error for it (given that it
was defined in a header that also defined FE_ALL_EXCEPT to a nonzero
value). To preserve that error, wrappers for the fallback fesetenv
and feupdateenv are created in sysdeps/mips/nofpu/.
Tested for mips64 (hard-float and soft-float, all three ABIs).
[BZ #23479]
* sysdeps/mips/bits/fenv.h (FE_INEXACT): Define only if
[__mips_hard_float].
(FE_UNDERFLOW): Likewise.
(FE_OVERFLOW): Likewise.
(FE_DIVBYZERO): Likewise.
(FE_INVALID): Likewise.
(FE_ALL_EXCEPT): Define to 0 if [!__mips_hard_float].
(FE_TOWARDZERO): Define only if [__mips_hard_float].
(FE_UPWARD): Likewise.
(FE_DOWNWARD): Likewise.
(__FE_UNDEFINED): Define if [!__mips_hard_float]
(FE_NOMASK_ENV): Define only if [__mips_hard_float].
* sysdeps/mips/mips64/sfp-machine.h (_FP_DECL_EX): Define only if
[__mips_hard_float].
(FP_ROUNDMODE): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
* sysdeps/mips/nofpu/fesetenv.c: New file.
* sysdeps/mips/nofpu/feupdateenv.c: Likewise.
_init and _fini are special functions provided by glibc for linker to
define DT_INIT and DT_FINI in executable and shared library. They
should never be put in dynamic symbol table. This patch marks them as
hidden to remove them from dynamic symbol table.
Tested with build-many-glibcs.py.
[BZ #23145]
* elf/Makefile (tests-special): Add $(objpfx)check-initfini.out.
($(all-built-dso:=.dynsym): New target.
(common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym).
($(objpfx)check-initfini.out): New target.
(generated): Add check-initfini.out.
* scripts/check-initfini.awk: New file.
* sysdeps/aarch64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/alpha/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/arm/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/hppa/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/i386/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/ia64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/m68k/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/microblaze/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/nios2/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sh/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sparc/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/x86_64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
When configured as --enable-stack-protector=all glibc
inserts stack checking canary into every function
including __sigsetjmp_aux(). Stack checking code
ends up using s0 register to temporary hold address
of global canary value.
Unfortunately __sigsetjmp_aux assumes no caller' caller-save
registers should be clobbered as it stores them as-is.
The fix is to disable stack protection of __sigsetjmp_aux.
Tested on the following test:
#include <setjmp.h>
#include <stdio.h>
int main() {
jmp_buf jb;
volatile register long s0 asm ("$s0");
s0 = 1234;
if (setjmp(jb) == 0)
longjmp(jb, 1);
printf ("$s0 = %lu\n", s0);
}
Without the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1082346228
With the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1234
[BZ #22624]
* sysdeps/mips/mips64/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch regenerates MIPS catan and catanh ulps for long double with
fixed expected results for the tests of those functions. ulps for
other types (which may see variation depending on whether glibc is
built for a processor with fused multiply-add support) are
deliberately not reduced. ulps are not regenerated for powerpc-nofpu
as such regeneration does not result in any changes for long double.
* sysdeps/mips/mips64/libm-test-ulps: Update catan and catanh ulps
for long double with corrected test expectations.
This corresponds to a patch applied to libgcc. In glibc it doesn't
actually affect much (only fma, I think).
The MIPS sfp-machine.h files have an _FP_CHOOSENAN implementation
which emulates hardware semantics of not preserving signaling NaN
payloads for an operation with two NaN arguments (although that
doesn't suffice to avoid sNaN payload preservation in any case with
just one NaN argument).
However, those are only hardware semantics in the legacy NaN case; in
the NAN2008 case, the architecture documentation says hardware
preserves payloads in such cases. Furthermore, this implementation
assumes legacy NaN semantics, so in the NAN2008 case the
implementation actually has the effect of preserving sNaN payloads but
not preserving qNaN payloads, when both should be preserved.
This patch fixes the code just to copy from the first argument.
Tested for mips64 soft-float.
* sysdeps/mips/mips32/sfp-machine.h (_FP_CHOOSENAN): Always
preserve NaN payload if [__mips_nan2008].
* sysdeps/mips/mips64/sfp-machine.h (_FP_CHOOSENAN): Likewise.
In a microMIPS compilation of `.init' code use the R_MICROMIPS_JALR
relocation intended for PIC call relaxation in microMIPS code rather
than the corresponding R_MIPS_JALR relocation meant for regular MIPS
code only.
* sysdeps/mips/mips32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n64/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
Avoid a build error with microMIPS compilation and recent versions of
GAS which complain if a branch targets a label which is marked as data
rather than microMIPS code:
../sysdeps/mips/mips32/crti.S: Assembler messages:
../sysdeps/mips/mips32/crti.S:72: Error: branch to a symbol in another ISA mode
make[2]: *** [.../csu/crti.o] Error 1
as commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of
branch and jump targets") closed a hole in branch processing, making
relocation calculation respect the ISA mode of the symbol referred.
This allowed diagnosing the situation where an attempt is made to pass
control from code assembled for one ISA mode to code assembled for a
different ISA mode and either relaxing the branch to a cross-mode jump
or if that is not possible, then reporting this as an error rather than
letting such code build and then fail unpredictably at the run time.
This however requires the correct annotation of branch targets as code,
because the ISA mode is not relevant for data symbols and is therefore
not recorded for them. The `.insn' pseudo-op is used for this purpose
and has been supported by GAS since:
Wed Feb 12 14:36:29 1997 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (mips_pseudo_table): Add "insn".
(s_insn): New static function.
* doc/c-mips.texi: Document .insn.
so there has been no reason to avoid it where required. More recently
this pseudo-op has been documented, by the microMIPS architecture
specification[1][2], as required for the correct interpretation of any
code label which is not followed by an actual instruction in an assembly
source.
Use it in our crti.S files then, to mark that the trailing label there
with no instructions following is indeed not a code bug and the branch
is legitimate.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
2016-11-18 Matthew Fortune <Matthew.Fortune@imgtec.com>
Maciej W. Rozycki <macro@imgtec.com>
* sysdeps/mips/mips32/crti.S (_init): Add `.insn' pseudo-op at
`.Lno_weak_fn' label.
* sysdeps/mips/mips64/n32/crti.S (_init): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Likewise.
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for
MIPS64 (both n64 and n32), removing a #error in one case now that case
has been tested and found to work.
Tested for mips64 (n64 and n32).
* sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64.
* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
(__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
This patch adds more libm test inputs found through random test
generation to increase previously known ulps. This particular test
generation was run for mips64, so most of the increased ulps are for
ldbl-128 (float and double having been fairly well covered by such
testing for x86_64), but there's the odd ulps increase for other
formats.
Tested for x86_64, x86 and mips64.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp,
exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and
tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
