This patch decrements the adapt_count while unlocking the futex
instead of before aquiring the futex as it is done on power, too.
Furthermore a transaction is only started if the futex is currently free.
This check is done after starting the transaction, too.
If the futex is not free and the transaction nesting depth is one,
we can simply end the started transaction instead of aborting it.
The implementation of this check was faulty as it always ended the
started transaction. By using the fallback path, the the outermost
transaction was aborted. Now the outermost transaction is aborted
directly.
This patch also adds some commentary and aligns the code in
elision-trylock.c to the code in elision-lock.c as possible.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/lowlevellock.h
(__lll_unlock_elision, lll_unlock_elision): Add adapt_count argument.
* sysdeps/unix/sysv/linux/s390/elision-lock.c:
(__lll_lock_elision): Decrement adapt_count while unlocking
instead of before locking.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c
(__lll_trylock_elision): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-unlock.c:
(__lll_unlock_elision): Likewise.
This patch implements __libc_tbegin_retry macro which is equivalent to
gcc builtin __builtin_tbegin_retry, except the changes which were applied
to __libc_tbegin in the previous patch.
If tbegin aborts with _HTM_TBEGIN_TRANSIENT. Then this macros restores
the fpc, fprs and automatically retries up to retry_cnt tbegins.
Further saving of the state is omitted as it is already saved in the
first round. Before retrying a further transaction, the
transaction-abort-assist instruction is used to support the cpu.
This macro is now used in function __lll_lock_elision.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/htm.h(__libc_tbegin_retry): New macro.
* sysdeps/unix/sysv/linux/s390/elision-lock.c (__lll_lock_elision):
Use __libc_tbegin_retry macro.
This patch defines __libc_tbegin, __libc_tend, __libc_tabort and
__libc_tx_nesting_depth in htm.h which replaces the direct usage of
equivalent gcc builtins.
We have to use an own inline assembly instead of __builtin_tbegin,
as tbegin has to filter program interruptions which can't be done with
the builtin. Before this change, e.g. a segmentation fault within a
transaction, leads to a coredump where the instruction pointer points
behind the tbegin instruction instead of real failing one.
Now the transaction aborts and the code should be reexecuted by the
fallback path without transactions. The segmentation fault will
produce a coredump with the real failing instruction.
The fpc is not saved before starting the transaction. If e.g. the
rounging mode is changed and the transaction is aborting afterwards,
the builtin will not restore the fpc. This is now done with the
__libc_tbegin macro.
Now the call saved fprs have to be saved / restored in the
__libc_tbegin macro. Using the gcc builtin had forced the saving /
restoring of fprs at begin / end of e.g. __lll_lock_elision function.
The new macro saves these fprs before tbegin instruction and only
restores them on a transaction abort. Restoring is not needed on
a successfully started transaction.
The used inline assembly does not clobber the fprs / vrs!
Clobbering the latter ones would force the compiler to save / restore
the call saved fprs as those overlap with the vrs, but they only
need to be restored if the transaction fails. Thus the user of the
tbegin macros has to compile the file / function with -msoft-float.
It prevents gcc from using fprs / vrs.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/Makefile (elision-CFLAGS):
Add -msoft-float.
* sysdeps/unix/sysv/linux/s390/htm.h: New File.
* sysdeps/unix/sysv/linux/s390/elision-lock.c:
Use __libc_t* transaction macros instead of __builtin_t*.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-unlock.c: Likewise.
This uses atomic operations to access lock elision metadata that is accessed
concurrently (ie, adapt_count fields). The size of the data is less than a
word but accessed only with atomic loads and stores.
See also x86 commit ca6e601a9d:
"Use C11-like atomics instead of plain memory accesses in x86 lock elision."
ChangeLog:
* sysdeps/unix/sysv/linux/s390/elision-lock.c
(__lll_lock_elision): Use atomics to load / store adapt_count.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c
(__lll_trylock_elision): Likewise.
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call. Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory. This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler. Hopefully full compiler support for
explicit_bzero will happen relatively soon.
There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.
The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway. Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary. The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.
* string/explicit_bzero.c: New routine.
* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
* string/Makefile (routines, strop-tests, tests): Add them.
* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
* string/string.h [__USE_MISC]: Declare explicit_bzero.
* debug/explicit_bzero_chk.c: New routine.
* debug/Makefile (routines): Add it.
* debug/tst-chk1.c: Test fortification of explicit_bzero.
* string/bits/string3.h: Fortify explicit_bzero.
* manual/string.texi: Document explicit_bzero.
* NEWS: Mention addition of explicit_bzero.
* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
data before returning, using explicit_bzero.
* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* include/string.h: Redirect internal uses of explicit_bzero
to __explicit_bzero_chk[_internal].
* string/Versions [GLIBC_2.25]: Add explicit_bzero.
* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
* sysdeps/arm/nacl/libc.abilist
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add entries for explicit_bzero and __explicit_bzero_chk.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
This patch makes bits/fcntl-linux.h include <linux/falloc.h> to define
the FALLOC_* flags under __USE_GNU (linux/falloc.h defines only those
bits, nothing else).
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]: Include
<linux/falloc.h>.
(FALLOC_FL_KEEP_SIZE): Remove.
(FALLOC_FL_PUNCH_HOLE): Likewise.
(FALLOC_FL_COLLAPSE_RANGE): Likewise.
(FALLOC_FL_ZERO_RANGE): Likewise.
This patch consolidates the Linux renameat implementation on
sysdeps/unix/sysv/linux/renameat.c. The renameat syscall was
deprecated at b0da6d44 for newer architectures, so using the
auto-generation list may generate wrappers that returns ENOSYS.
Current code try to use __NR_renameat and if it is not define
it uses __NR_renameat2.
Checked on x86_64 and aarch64.
* sysdeps/unix/sysv/linux/renameat.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove renameat.
This patch consolidates the Linux rename implementation on
sysdeps/unix/sysv/linux/rename.c. Current code try to use
__NR_rename if is defined and apply the same strategy for
__NR_renameat and __NR_renameat2.
Check on x86_64 and aarch64.
* sysdeps/unix/sysv/linux/rename.c: New file.
* sysdeps/unix/sysv/linux/generic/rename.c: Remove file.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
This uses atomic operations to access lock elision metadata that is accessed
concurrently (ie, adapt_count fields). The size of the data is less than a
word but accessed only with atomic loads and stores; therefore, we add
support for shorter-size atomic load and stores too.
* include/atomic.h (__atomic_check_size_ls): New.
(atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed,
atomic_store_release): Use it.
* sysdeps/x86/elide.h (ACCESS_ONCE): Remove.
(elision_adapt, ELIDE_LOCK): Use atomics.
* sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use
atomics and improve code comments.
* sysdeps/unix/sysv/linux/x86/elision-trylock.c
(__lll_trylock_elision): Likewise.
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
It is no longer needed since commit 6c444ad6e9
(elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]).
Applications do not link against ld.so and will use the definition in
libc.so, so there is no ABI impact.
This change moves the main implementation of _dl_catch_error,
_dl_signal_error to libc.so, where TLS variables can be used
directly. This removes a writable function pointer from the
rtld_global variable.
For use during initial relocation, minimal implementations of these
functions are provided in ld.so. These are eventually interposed
by the libc.so implementations. This is implemented by compiling
elf/dl-error-skeleton.c twice, via elf/dl-error.c and
elf/dl-error-minimal.c.
As a side effect of this change, the static version of dl-error.c
no longer includes support for the
_dl_signal_cerror/_dl_receive_error mechanism because it is only
used in ld.so.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Do not define
fxstat if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Ditto for
fxstatat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Ditto for
lxstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Ditto for xstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Make __lxstat
an alias of __lxstat64 if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Ditto for
__xstat.
The __longjmp symbol was left in accidentally. It is not exported
through a Versions file, but through a .symver assembler directive.
The corresponding exported symbol was removed from the non-fpu
powerpc64 targets in commit 9b9ef82358.
Building tests for IA64 runs into a build failure compiling
stdlib/tst-setcontext2.c:
tst-setcontext2.c: In function 'do_test':
tst-setcontext2.c:210:20: error: passing argument 1 of 'sigismember' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (sigismember (&oldctx.uc_sigmask, SIGUSR2) != 1)
^
Indeed, the IA64 uc_sigmask as unsigned long rather than the larger
userspace sigset_t. Fixing this might be hard; this patch works
around the build failure by making IA64 wrap the test with a version
that #defines sigismember to add a cast (I'd welcome a better approach
for fixing this).
Tested (compilation only) for ia64.
* sysdeps/unix/sysv/linux/ia64/tst-setcontext2.c: New file.
* sysdeps/unix/sysv/linux/fstatfs64.c: Reorder include files,
only alias fstatfs and __fstatfs if STATFS_IS_STATFS64 is non-zero.
* sysdeps/unix/sysv/linux/statfs64.c: Ditto for statfs and __statfs.
The nios2 sys/cachectl.h includes a kernel header asm/cachectl.h,
which does not exist, so causing the check-installed-headers tests to
fail. This patch removes the include of a nonexistent header.
Tested (compilation only) for nios2.
* sysdeps/unix/sysv/linux/nios2/sys/cachectl.h: Do not include
<asm/cachectl.h>.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.
The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.
Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayloadsig): New declaration.
* math/Versions (setpayloadsig): New libm symbol at version
GLIBC_2.25.
(setpayloadsigf): Likewise.
(setpayloadsigl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadsigF.
* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
(setpayloadsig_test_data): New array.
(setpayloadsig_test): New function.
(main): Call setpayloadsig_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
setpayloadsigf and setpayloadsigl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayloadsig.
(CFLAGS-nldbl-setpayloadsig.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
* sysdeps/unix/sysv/linux/fstatfs64.c: Hide prototypes for fstatfs
and __fstatfs. Make them aliases of __fstatfs64 if
STATFS_IS_STATFS64 is set to non-zero.
* sysdeps/unix/sysv/linux/statfs64.c: Ditto for __statfs, statfs,
and __statfs64.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fstatfs.c: Do not
define __fstatfs and fstatfs if STATFS_IS_STATFS64 is non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/statfs.c: Ditto
for __statfs and statfs.
* sysdeps/unix/sysv/linux/alpha/kernel_stat.h: Set STATFS_IS_STATFS64
to 0.
* sysdeps/unix/sysv/linux/generic/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/ia64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/s390/s390-64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/sparc/sparc64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/x86_64/kernel_stat.h: Ditto.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid. The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.
The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month). This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayload): New declaration.
* math/Versions (setpayload): New libm symbol at version
GLIBC_2.25.
(setpayloadf): Likewise.
(setpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadF.
* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
test_Ff_b1_data.
(RUN_TEST_Ff_b1): New macro.
(RUN_TEST_LOOP_Ff_b1): Likewise.
(canonicalize_test_data): Update type.
(setpayload_test_data): New array.
(setpayload_test): New function.
(main): Call setpayload_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayload,
setpayloadf and setpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayload.
(CFLAGS-nldbl-setpayload.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The set_dataplane() API in <sys/dataplane.h> originally supported the
Tilera version of Linux as shipped to our customers. Once we started
upstreaming the dataplane support in the kernel, the API changed
to use fcntl() as part of the current task-isolation patch series.
It doesn't seem like continuing to support the old API is useful
for newly-compiled code, and even supporting the old glibc binary
API on an upstream kernel that supports the new task isolation mode
isn't straightforward, since the semantics have changed in ways that
make it hard to map the old semantics precisely to the new ones,
so just return ENOSYS.
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff2385
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
The check-installed-headers tests show up that the Alpha <sys/user.h>
is not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for Alpha (compilation only).
* sysdeps/unix/sysv/linux/alpha/sys/user.h: Include <stddef.h>.
Implement an internal version of __access called __access_noerrno that
avoids setting errno. This is useful to check accessibility of files
very early on in process startup i.e. before TLS setup. This allows
tunables to replace MALLOC_CHECK_ safely (i.e. check existence of
/etc/suid-debug to enable/disable MALLOC_CHECK) and at the same time
initialize very early so that it can override IFUNCs.
Checked on x86_64.
* hurd/hurd.h (__hurd_fail_noerrno): New function.
* include/unistd.h [IS_IN (rtld) || !defined SHARED]: Declare
__access_noerrno.
* io/access.c (__access_noerrno): New function.
* sysdeps/mach/hurd/access.c (hurd_fail_seterrno): New function.
(hurd_fail_seterrno): Likewise.
(access_common): Likewise.
(__access_noerrno): Likewise.
* sysdeps/nacl/access.c (__access_noerrno): Likewise.
* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
* sysdeps/nacl/nacl-interfaces.h (NACL_CALL_NOERRNO): New
macro.
This patch fixes SH4 register-dump.h to declare a variable inside the
the build for soft-float.
Tested (compilation only) for SH4 soft-float.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h (register_dump):
Only declare fpregs if [__SH_FPU_ANY__].
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-06/msg00657.html>, there
are various problems with the sigcontext / mcontext / ucontext
structures on SH. The soft-float SH4 case in fact does not build at
present, with errors processing
sysdeps/unix/sysv/linux/sh/sh4/ucontext_i.sym with gen-as-const.awk
("error: 'mcontext_t {aka struct <anonymous>}' has no member named
'fpregs'").
Linux 4.8 (commit bbe6c77857c38f4acbdc4fc70399515226d1859a) moved to
always using the same sigcontext structure on SH, with room for
floating-point registers whether or not present on the processor.
This patch makes the glibc header match.
Tested (compilation only) for sh4-linux-gnu hard float, and in
conjunction with other fixes for soft float.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h [__SH4__ || __SH4A__]:
Make code unconditional.
[!(__SH4__ || __SH4A__)]: Remove conditional code.
This patch makes tilegx32 install libraries in lib32 directories,
matching what GCC expects and avoiding conflict with 64-bit libraries
installed in lib directories.
Tested (compilation only) for tilegx (32-bit and 64-bit, BE and LE,
GCC 5).
* sysdeps/unix/sysv/linux/tile/tilegx/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR for tilegx32.
* sysdeps/unix/sysv/linux/tile/tilegx/configure: Regenerated.
The check-installed-headers tests show up that the SH <sys/user.h> is
not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for SH3 and SH4 (compilation only).
* sysdeps/unix/sysv/linux/sh/sys/user.h: Include <stddef.h>.
Since 327792c sh4 builds fails with:
../sysdeps/unix/sysv/linux/kernel-features.h:49:0: error: "__ASSUME_ST_INO_64_BIT" redefined [-Werror]
#define __ASSUME_ST_INO_64_BIT 1
^
In file included from ../sysdeps/unix/sysv/linux/sysdep.h:19:0,
from ../sysdeps/unix/sysv/linux/sh/sysdep.h:24,
from ../sysdeps/unix/sysv/linux/sh/sh4/sysdep.h:4,
from <stdin>:1:
../sysdeps/unix/sysv/linux/sh/kernel-features.h:47:0: note: this is the location of the previous definition
#define __ASSUME_ST_INO_64_BIT 0
It is because sh4 kernel-features.sh is included multiple times
without guards and this patch fixes by adding them.
Tested on a sh4-linux-gnu build.
* sysdeps/unix/sysv/linux/sh/kernel-features.h: Add include
guards.
This patch consolidates the Linux access implementation on
sysdeps/unix/sysv/linux/access.c. Similar to auto-generation through
syscalls.list, __NR_access is check and __NR_faccessat is used only
for newer architectures (where __NR_access is not defined).
Checked on x86_64.
* sysdeps/unix/sysv/linux/access.c: New file.
* sysdeps/unix/sysv/linux/generic/access.c: Remove file.
This patch consolidates all Linux truncate implementation on
sysdeps/unix/sysv/linux/truncate{64}.c. It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall
construction.
General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias. The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.
Tested on x86_64, i386, aarch64, and armhf.
* sysdeps/unix/sysv/linux/arm/truncate64.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/truncate.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/truncate64.c: Likewise.
* sysdeps/unix/sysv/linux/truncate.c: New file.
* sysdeps/unix/sysv/linux/truncate64.c (truncate64): Use
INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (truncate):
Remove.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (truncate):
Likewise.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
THis patch consolidates all Linux ftruncate implementation on
sysdeps/unix/sysv/linux/ftruncate{64}.c. It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction.
General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias. The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.
Tested on x86_64, i386, aarch64, and armhf.
* posix/tst-truncate-common.c: New file.
* posix/tst-truncate.c: Use tst-truncate-common.c.
* posix/tst-truncate64.c: Likewise and add LFS tests.
* sysdeps/unix/sysv/linux/arm/ftruncate64.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/ftruncate64.c: Likewise.
* sysdeps/unix/sysv/linux/ftruncate.c: New file.
* sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Use
INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
[__OFF_T_MATCHES_OFF64_T] (ftruncate): Add alias.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (ftruncate):
Remove.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (ftruncate):
Likewise.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
This patch adds a localplt.data file for sh so that test passes. The
architecture-specific entries are for _Unwind_Find_FDE, _exit and
__errno_location.
Tested for sh3 and sh4.
* sysdeps/unix/sysv/linux/sh/localplt.data: New file.
This patch adds a localplt.data file for hppa so that test passes.
Architecture maintainers should feel free to clean up the sysdeps code
so that some or all of the system-specific entries
libc.so: _exit
libc.so: __sigsetjmp
libc.so: _IO_funlockfile
libc.so: sigprocmask
libc.so: __errno_location
libpthread.so: __errno_location
are no longer needed.
Tested for hppa. Note: check-execstack and check-textrel still fail;
you may wish to look at those to get to a clean baseline there (they
are less obvious for people not familiar with the architecture).
* sysdeps/unix/sysv/linux/hppa/localplt.data: New file.
This patch updates alpha localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing. The failures I see without
this patch are:
Missing required PLT reference: ld.so: __tls_get_addr
Missing required PLT reference: ld.so: free
Now, __tls_get_addr can be made optional. For free, rather than
making it optional as in libc.so it seems better to mark all the
malloc-related symbols in both libc.so and ld.so as allowing an
R_ALPHA_GLOB_DAT relocation as an alternative to using a PLT entry, so
this patch does so.
Tested for alpha.
* sysdeps/unix/sysv/linux/alpha/localplt.data: Make __tls_get_addr
optional in ld.so. Allow R_ALPHA_GLOB_DAT relocation for malloc,
calloc, realloc, free, memalign and __libc_memalign rather than
making them optional.
This patch updates nios2 localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing. A new PLT entry for
__extendsfdf2 is added.
Tested for nios2.
* sysdeps/unix/sysv/linux/nios2/localplt.data: Add __extendsfdf2
for libc.so.
This patch consolidates all Linux lseek/lseek64/llseek implementation
in on on sysdeps/unix/sysv/linux/lseek{64}.c. It also removes the llseek
file and instead consolidate the LFS lseek implementation on lseek64.c
as for other LFS symbols implementations.
The general idea is:
- lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable
use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek.
ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol.
- lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek
(since it will use 64-bit arguments without low/high splitting) and
__NR__llseek if __NR_lseek is not defined (for some ILP32 ports).
- llseek: files will be removed and symbols will be aliased ot lseek64.
ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32
so far) are covered by building lseek with off_t as expected and lseek64
using __NR_lseek (as expected for off64_t being passed using 64-bit registers).
For this consolidation I mantained the x32 assembly specific implementation
because to correctly fix this it would required both the x32 fix for
{INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to
return 64 bits instead of default 32 bits (as for times). It could a future
cleanup.
It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2],
although it is mainly for simplification.
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* nptl/Makefile (libpthread-routines): Remove ptw-llseek and add
ptw-lseek64.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek.
* sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines):
Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise.
* sysdeps/unix/sysv/linux/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/lseek.c: New file.
* sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and
__libc_lseek64 from auto-generation.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html
[2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
This patch adds the missing Linux sparc definitions from d060cd0.
Both value are copied from default sparc value [1] and with this
fix now both sparc 32 and 64 bits builds on Linux.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
(__WORDSIZE_TIME64_COMPAT32): Define for both 32 and 64 bits.
[1] sysdeps/sparc/sparc{32,64}/bits/wordsize.h
The check-installed-headers tests show up that the MIPS <sys/user.h>
is not self-contained, using size_t without including any header that
defines it. This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.
Tested for MIPS (all 24 ABIs, compilation only).
* sysdeps/unix/sysv/linux/mips/sys/user.h: Include <stddef.h>.
