The fdim and fdimf functions on sparc do not fully follow the standard
and do not set errno to ERANGE when the result overflows. Since glibc
2.24 this causes the two following tests to fail:
Failure: fdim (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
Failure: fdim_upward (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
It happens that using GCC with the generic C code generates very similar
code to the sparc specific implementations. Therefore this patches
remove them. Note it might still worth adding a vis3 specific version of
fdim on sparc32/sparcv9, this is done in a following patch to ease
backporting.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_fdimf-vis3, s_fdim-vis3.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: Delete file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: Likewise.
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.
sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.
Changelog:
* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_ceil-vis3.c): Likewise.
(CFLAGS-s_floorf-vis3.c): Likewise.
(CFLAGS-s_floor-vis3.c): Likewise.
(CFLAGS-s_truncf-vis3.c): Likewise.
(CFLAGS-s_trunc-vis3.c): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
The ceil, floor and trunc functions on sparc do not fully follow the
standard and trigger an inexact exception when presented a value which
is not an integer. Since glibc 2.24 this causes a few tests to fail,
for instance:
testing double (without inline functions)
Failure: ceil (lit_pi): Exception "Inexact" set
Failure: ceil (-lit_pi): Exception "Inexact" set
Failure: ceil (min_subnorm_value): Exception "Inexact" set
Failure: ceil (min_value): Exception "Inexact" set
Failure: ceil (0.1): Exception "Inexact" set
Failure: ceil (0.25): Exception "Inexact" set
Failure: ceil (0.625): Exception "Inexact" set
Failure: ceil (-min_subnorm_value): Exception "Inexact" set
Failure: ceil (-min_value): Exception "Inexact" set
Failure: ceil (-0.1): Exception "Inexact" set
Failure: ceil (-0.25): Exception "Inexact" set
Failure: ceil (-0.625): Exception "Inexact" set
I tried to fix that by using the same strategy than used on other
architectures, that is by saving the FSR register at the beginning
and restoring it at the end of the function. When doing so I noticed
a comment that this operation might be very costly, so I decided to
do some benchmarks.
The benchmarks below represent the time required to run each of the
function 60 millions of times with different input value. I have done
that in the basic V9 code, the VIS2 code, and using the default C
implementation of the libc, for both sparc32 and sparc64, on a Niagara
T1 based machine and an UltraSparc IIIi. Given I don't have access to a
more recent machine), I haven't been able to test the VIS3 version. Also
it should be noted that it doesn't make sense to do this benchmark for
V8 or earlier as in that case we use the default C implementation. The
results are available in the table below, the "+ fix" version correspond
to the one saving and restoring the FSR.
Niagara T1 / sparc32
--------------------
ceilf ceil floorf floor truncf trunc
V9 19.10 22.48 19.10 22.48 16.59 19.27
V9 + fix 19.77 23.34 19.77 23.33 17.27 20.12
VIS2 16.87 19.62 16.87 19.62
VIS2 + fix 17.55 20.47 17.55 20.47
C impl 11.39 13.80 11.40 13.80 10.88 10.84
Niagara T1 / sparc64
--------------------
ceilf ceil floorf floor truncf trunc
V9 18.14 22.23 18.14 22.23 15.64 19.02
V9 + fix 18.82 23.08 18.82 23.08 16.32 19.87
VIS2 15.92 19.37 15.92 19.37
VIS2 + fix 16.59 20.22 16.59 20.22
C impl 11.39 13.60 11.39 15.36 10.88 12.65
UltraSparc IIIi / sparc32
-------------------------
ceilf ceil floorf floor truncf trunc
V9 4.81 7.09 6.61 11.64 4.91 7.05
V9 + fix 7.20 10.42 7.14 10.54 6.76 9.47
VIS2 4.81 7.03 4.76 7.13
VIS2 + fix 6.76 9.51 6.71 9.63
C impl 3.88 8.62 3.90 9.45 3.57 6.62
UltraSparc IIIi / sparc64
-------------------------
ceilf ceil floorf floor truncf trunc
V9 3.48 4.39 3.48 4.41 3.01 3.85
V9 + fix 4.76 5.90 4.76 5.90 4.86 6.26
VIS2 2.95 3.61 2.95 3.61
VIS2 + fix 4.24 5.37 4.30 7.97
C impl 3.63 4.89 3.62 6.38 3.33 4.03
The first thing that should be noted is that the C implementation is
always faster on the Niagara T1 based machine. On the UltraSparc IIIi
the float version on sparc32 is also faster.
Coming back about the fix saving and restoring the FSR, it appears
it has a big impact as expected. In that case the C implementation is
always faster than the fixed implementations.
This patch therefore removes the sparc specific implementations in
favor of the generic ones.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math] (libm-sysdep_routines): Remove.
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis2.S: Delete
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: Likewise.
nearbyint and nearbyintf should not trigger inexact exceptions, but
should still trigger an invalid exception for a sNaN input.
The SPARC specific implementations of these functions save the FSR at
the beginning of the function and restore it at the end to not trigger
an inexact exception. This however doesn't work for an sNaN input which
need to trigger an invalid exception. Fix that by adding a fcmp
instruction using the input value before saving FSR, so that an invalid
exception is triggered for a sNaN input.
This fixes the math/test-nearbyint-except test on SPARC.
Changelog:
* sparc/sparc32/sparcv9/fpu/s_nearbyint.S (__nearbyint): Trigger an
invalid exception for a sNaN input.
* sparc/sparc32/sparcv9/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S
(__nearbyint_vis3): Likewise
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S
(__nearbyintf_vis3): Likewise
* sparc/sparc64/fpu/s_nearbyint.S (__nearbyint): Likewise.
* sparc/sparc64/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S (__nearbyint_vis3):
Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S (__nearbyintf_vis3):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
trunc{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
nearbyint{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
fdim/fdimf to libm-sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new vis3
fmin/fmax sysdep routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/unix/sysv/linux/multiarch/Implies:
New file.
* sysdeps/sparc/configure.in: New file.
* sysdeps/sparc/configure: Generate.
* configure.in (libc_cv_sparc_as_vis3): Substitute.
* configure: Regenerate.
* config.h.in (HAVE_AS_VIS3_SUPPORT): New.
* config.make.in (have-as-vis3): New.
* sysdeps/sparc/sparc32/sparcv9/Makefile (ASFLAGS-*): If VIS3 is
available use -Av9d instead of -Av9a.
* sysdeps/sparc/sparc64/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S (__copysign): Use fzeros/fnegs
to load 0x80000000 into a float register instead of using the stack.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S (__copysignf): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinff.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: New file.
2004-12-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Add support
for NPTL where the PID is stored at userlevel and needs to be reset
when CLONE_THREAD is not used.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h
(SYSCALL_ERROR_HANDLER): If RTLD_PRIVATE_ERRNO, use rtld_errno
instead of errno.
* sysdeps/unix/sysv/linux/sparc/sparc64/socket.S: Include
sysdep-cancel.h instead of sysdep.h. Handle cancellation.
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Regenerate.
* sysdeps/ieee754/ldbl-128/e_expl.c: Include stdlib.h.
2002-04-02 Jakub Jelinek <jakub@redhat.com>
* inet/ether_ntoh.c (__nss_ethers_lookup): Add internal_function.
* inet/ether_hton.c (__nss_ethers_lookup): Likewise.
* inet/getnetgrent_r.c (__nss_netgroup_lookup): Likewise.
* sunrpc/netname.c (__nss_publickey_lookup): Likewise.
* sunrpc/publickey.c (__nss_publickey_lookup): Likewise.
2002-03-30 Jakub Jelinek <jakub@redhat.com>
* elf/dynamic-link.h (elf_get_dynamic_info): Don't abort on unknown
dynamic tags.
2002-03-29 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/s_fabs.S: New file.
* sysdeps/i386/fpu/s_fabsf.S: New file.
* sysdeps/i386/fpu/s_fabsl.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc64/fpu/s_fabsf.c: New file.
* sysdeps/sparc/sparc64/fpu/s_fabsl.c: New file.
2002-04-02 Ulrich Drepper <drepper@redhat.com>
* rt/tst-shm.c (do_test): Add one more test for size of shared
memory object.
2002-03-29 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Add short description and prototypes for
malloc_get_state, malloc_set_state and posix_memalign, for
consistency and to avoid warnings with -Wstrict-prototypes.
Reported by Andreas Jaeger <aj@suse.de>.
2002-04-02 Ulrich Drepper <drepper@redhat.com>
* po/gl.po: Update from translation team.
2001-09-29 Jes Sorensen <jes@trained-monkey.org>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h (struct sigcontext):
Add sc_loadrs and sc_rbs_bas to match current kernel.
2001-09-27 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Update.
* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Fix erfc(-inf).
2001-09-27 Jakub Jelinek <jakub@redhat.com>
* elf/dl-open.c (dl_open_worker): If l_opencount of freshly loaded
object has been bumped because of relocation dependency, avoid
duplicates in l_scope.
(show_scope): Fix typos.
* elf/Makefile: Add rules to build and run reldep6.
* elf/reldep6.c: New file.
* elf/reldep6mod0.c: New file.
* elf/reldep6mod1.c: New file.
* elf/reldep6mod2.c: New file.
* elf/reldep6mod3.c: New file.
* elf/reldep6mod4.c: New file.
2001-09-26 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Call
sparc64_fixup_plt.
(sparc64_fixup_plt): Moved from elf_machine_fixup_plt. Optimize
near jumps and 0xfffff800XXXXXXXX target addresses, no thread safety
for non-lazy binding. Fix .plt[32768+] handling.
(elf_machine_plt_value): Don't add addend.
(elf_machine_rela): Call sparc64_fixup_plt instead of
elf_machine_fixup_plt.
(elf_machine_runtime_setup, TRAMPOLINE_TEMPLATE): Optimize for
dynamic linker at 0xfffff800XXXXXXXX.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-04-18 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/swapcontext.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/setcontext.S (__setcontext):
Copy first word of uc_sigmask into __uc_sigmask.
* sysdeps/unix/sysv/linux/sparc/sparc64/getcontext.S (__getcontext):
Save uc_link around trap. Copy __uc_sigmask into first word of
uc_sigmask, clear the rest. Make sure setcontext to the created
context doesn't do this though.
* sysdeps/unix/sysv/linux/sparc/sparc64/ucontext_i.h: New file.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (ucontext_t): Add
uc_stack and uc_sigmask, rename old uc_sigmask to __uc_sigmask in the
64bit version, make uc_sigmask __sigset_t in the 32bit version.
* rt/Makefile (otherlibs): Added for static NSS.
* glibcbug.in (BUGGLIBC): Send to new alias.
