I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
hurd initialization stages use RUN_HOOK to run various initialization
functions. That is however using absolute addresses which need to be
relocated, which is done later by csu. We can however easily make the
linker compute relative addresses which thus don't need a relocation.
The new SET_RELHOOK and RUN_RELHOOK macros implement this.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
Notifying the proc server is an involved task, and unleashes various signal
handling etc. so we have to do this after e.g. ifunc relocations are
completed.
This patch fixes -Wempty-body warnings in Hurd-specific code that show
up building glibc with -Wextra.
Note: there also such warnings on many platforms arising from the
default definition of HP_TIMING_NOW in sysdeps/generic/hp-timing.h,
but no change there is proposed in this patch because of other changes
under discussion in that area that would result in a nonempty
definition.
Tested with build-many-glibcs.py.
* hurd/hurdinit.c (_hurd_init): Use braces around empty body of an
if statement.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* hurd/hurdinit.c (_hurd_new_proc_init): Don't do initial SIGTRAP if
EXEC_SIGTRAP was set in the incoming exec flags--that indicates the
exec server simulated a SIGTRAP before we even started up, so gdb is
already happy.
Provide backwards binary compatibility for the Hurd.
* hurd/geteuids.c [PIC && DO_VERSIONING]: Make __getuids a weak
alias for geteuids.
* hurd/Versions [GLIBC_2.0]: Add __getuids,
__hurd_file_name_lookup and _hurd_umask.
[GLIBC_2.1]: Add _hurd_proc_init.
* hurd/Makefile [versioning] (routines): Add compat-20.
(shared-only-routines): Likewise.
* hurd/hurdinit.c (_hurd_new_proc_init): Renamed from
_hurd_proc_init. Use it as the default _hurd_proc_init version
for GLIBC_2.1.
* hurd/compat-20.c: New file.
* mach/Versions [GLIBC_2.0]: Add __vm_allocate.
* hurd/hurdsig.c (_hurdsig_init): Take new args, INTARRAY and
INTARRAYSIZE. Initialize main thread's sigstate from INIT_SIG* ints.
* hurd/hurd/signal.h: Update _hurdsig_init decl.
* hurd/hurdinit.c (_hurd_proc_init): Take new args, INTARRAY and
INTARRAYSIZE, pass them down to _hurdsig_init.
* hurd/hurd.h: Update _hurd_proc_init decl.
Sun Dec 15 01:53:20 1996 Ulrich Drepper <drepper@cygnus.com>
* Makefile (subdirs): Change crypt to md5-crypt.
* crypt/Makefile, crypt/md5-crypt.c, crypt/md5.c, crypt/md5.h,
crypt/md5c-test.c, crypt/md5test.c: Move to new directory
md5-crypt.
* sysdeps/unix/sysv/linux/configure.in: Refer to linuxthreads and
crypt instead of LinuxThreads and des-crypt.
* Makefile (subdirs): Add nss back.
* sysdeps/unix/inet/Subdirs: Move nis to end of file to fulfill
dependencies.
* libio/iofclose.c: Implement fclose(NULL) as closing all streams.
* stdio-common/Makefile (routines): Add fcloseall.
* stdio-common/fcloseall.c: New file.
* sysdeps/generic/abort.c: Make implementation POSIX.1 compatible.
* sysdeps/mach/libc-lock.h: Add definition of __libc_lock_trylock.
* sysdeps/stub/libc-lock.h: Define __libc_lock_trylock to always
return 0.
* stdio-common/printf.h: Define MIN and MAX only if not already
defined.
* stdio-common/vfprintf.c: Set errno to EBADF if stream does not
allow writing. Required by POSIX.1.
* libio/libioP.h (CHECK_FILE): Use MAYBE_SET_EINVAL instead of
assignment.
* interp.c: Update copyright.
* libio/clearerr.c: Likewise.
* libio/ioseekoff.c: Likewise.
* libio/ioseekpos.c: Likewise.
* stdio/fclose.c: Likewise.
* stdio/fflus.c: Likewise.
* libio/libio.h [!_IO_MTSAFE_IO]: Define _IO_cleanup_region_start
and _IO_cleanup_region_end as empty.
* libio/fgetc.c: Use _IO_cleanup_region_start and
_IO_cleanup_region_end instead of __libc_cleanup_region_start and
__libc_cleanup_region_end.
* libio/fputc.c: Likewise.
* libio/freopen.c: Likewise.
* libio/fseek.c: Likewise.
* libio/getc.c: Likewise.
* libio/getchar.c: Likewise.
* libio/iofclose.c: Likewise.
* libio/iofflush.c: Likewise.
* libio/iofgetpos.c: Likewise.
* libio/iofgets.c: Likewise.
* libio/iofputs.c: Likewise.
* libio/iofread.c: Likewise.
* libio/iofsetpos.c: Likewise.
* libio/ioftell.c: Likewise.
* libio/iofwrite.c: Likewise.
* libio/iogetdelim.c: Likewise.
* libio/iogets.c: Likewise.
* libio/ioputs.c: Likewise.
* libio/iosetbuffer.c: Likewise.
* libio/iosetvbuf.c: Likewise.
* libio/ioungetc.c: Likewise.
* libio/iovspintf.c: Use cleanup handler to make sure no dangling
locks can stay over.
* libio/iovsscanf.c: Likewise.
* libio/genops.c: Use _IO_lock_init_recursive and _IO_lock_fini
instead of __libc_lock_init_recursive and __libc_lock_fini.
* libio/filedoalloc.c: Only use __isatty when compiling GNU libc.
Otherwise use isatty.
* libio/fileops.c: Likewise for __open and open.
* login/utmp_file.c (getutent_r_file): Use fcntl instead of
flock.
* nis/ypclnt.h: Add more casts to prevent warnings.
* nss/Makefile (services): Remove dns.
(libnss_dns, libnss_dns-inhibit-o): Remove definition.
($(objpfx)libnss_dns.so): Removed.
* nss/nss_dns/dns-host.c, nss/nss_dns/dns-network.c: Moved to...
* resolv/nss_dns: ...here.
* resolv/Makefile (extra-libs): Add libnss_dns.
(libnss_dns-routines, libnss_dns-inhibit-o): Define as in
nss/Makefile.
* nss/XXX-lookup.c: Call __nss_database_lookup with new argument
specifying alternate name for entry in /etc/nsswitch.conf
* nss/nsswitch.c: If no entry with primary name is found in
/etc/nsswitch.conf try alternate name if given.
* nss/nsswitch.h: Add new parameter in prototype for
__nss_database_lookup.
* nss/spwd-lookup.c: Provide alternative entry name to look for.
This makes our NSS compatible with Solaris' nsswitch.conf files.
* string/tst-strlen.c: Change all counting variables to type size_t
to prevent warnings.
* sysdeps/posix/fpathconf.c: Update copyright.
* sysdeps/posix/pathconf.c: Don't call fpathconf to do the work.
Opening the file at this path may fail if it is a FIFO or pipe.
These changes make the time implementation POSIX.1 compliant.
* time/localtime.c (__localtime_r): Always call __tzset not only
if __tzset_run is zero.
* time/strftime.c: Add definition of memset_space to help to
reduce for systems which have memset.
(strftime): Don't use tm_zone member of argument for zone name.
Instead always use tzname[].
Call tzset() as required by POSIX.1 before any action.
* time/tzset.c (tzset): Set tzname[] as required by POSIX.1.
Remove global variable __tzset_run. __tzset is now called always
when a dependent function is used.
(__tzset): Caching happens based on the contents of the
environment variable TZ.
Fri Dec 13 01:06:52 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/unix/sysv/linux/paths.h: Add _PATH_KLOG.
Thu Dec 12 09:16:35 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* rellns-sh: Correctly handle a relative source file name.
Wed Dec 11 19:18:40 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* login/utmp_file.c (setutent_file): Seek back to beginning of the
file if resetting.
Thu Dec 12 16:39:12 1996 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu>
* hurd/hurdinit.c (map0): Delete function. Don't do this on
_hurd_preinit_hook.
* hurd/hurdstartup.c (_hurd_startup): Map page zero redzone here.
Sat Sep 21 14:59:22 1996 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu>
* shlib-versions (*-*-gnu*): Increment libc to 0.2 for upcoming
binary distribution.
* sysdeps/mach/hurd/Makefile (rtld-installed-name): Provide
definition to override dangerous one in Makeconfig.
* hurd/Makefile (install-headers-nosubdir): Install <rpc/netdb.h>.
($(includedir)/rpc/netdb.h): New rule.
[ This is XXX until sunrpc can be built; <rpc/netdb.h> is
essential. ]
Fri Sep 20 16:06:06 1996 Thomas Bushnell, n/BSG <thomas@gnu.ai.mit.edu>
* sysdeps/mach/hurd/i386/init-first.c (_dl_start): Add definition,
to guarantee link errors if this is included in ld.so.
* shlib-versions (*-*-*): Add libutil=1.
* rpm/Makefile (install-lib): Add libc.a et al.
(install-others): Only add libc.so if $(build-shared) is yes.
* math/Makefile (install-lib): New variable, list libieee.a.
(non-lib.a): Likewise.
(extra-objs): Likewise, and ieee-math.o.
($(objpfx)libieee.a): New target, link to ieee-math.o.
* math/ieee-math.c: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir)=math]: Remove setfpucw
and libieee.a stuff.
* sysdeps/unix/sysv/linux/ieee-fpucw.c: File removed.
* sysdeps/unix/sysv/linux/i386/ieee_fpu.c: File removed.
* hurd/hurd-raise.c (_hurd_raise_signal): Pass sigcode in msg_sig_post
rpc.
* hurd/hurdmsg.c (_S_msg_set_environment): Use argz.h functions
instead of _hurd_split_args.
(_S_msg_*_exec_flags): Functions removed.
(_S_msg_startup_dosync): Stub removed.
Sat May 4 02:11:55 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu>
* sysdeps/mach/hurd/ptrace.c: Set _hurdsig_traced instead of
EXEC_TRACED bit in _hurd_exec_flags.
Pass sigcode arg in msg_sig_post_untraced rpc.
* sysdeps/mach/hurd/access.c: Don't pass io port in
auth_user_authenticate rpc.
* posix/sched.h: Fix typos.
* sysdeps/mach/hurd/fork.c: Use new critical section lock.
Clear _hurdsig_traced instead of EXEC_TRACED.
* sysdeps/stub/nanosleep.c (nanosleep): Fix typo.
* wcsmbs/wcstol.c: Find strtol.c in ../stdlib.
* wcsmbs/wcstof.c: Find strtod.c in ../stdlib.
* wcsmbs/wcstod.c: Likewise.
* wcsmbs/wcstold.c: Likewise.
* wcsmbs/wcwidth.h: Find cname-lookup.h in ../wctype.
* string/envz.c (envz_entry): Use const.
(envz_get, envz_remove): Likewise.
(envz_entry): Return char *, not const char *.
* string/envz.h: Fix decl.
* string/argz-create.c: Use const in prototype.
* string/argz-next.c: Likewise.
* sysdeps/mach/hurd/sigprocmask.c: Pass sigcode arg to msg_sig_post.
* sysdeps/mach/hurd/i386/sigreturn.c: Likewise.
* sysdeps/mach/hurd/sigsuspend.c: Likewise.
* sysdeps/mach/hurd/kill.c: Likewise.
* hurd/hurdexec.c (_hurd_exec): Use new critical section lock.
* hurd/catch-exc.c (_S_catch_exception_raise): Likewise.
* hurd/sigunwind.c (_hurdsig_longjmp_from_handler): Likewise.
* hurd/thread-cancel.c (hurd_thread_cancel, hurd_check_cancel):
Likewise.
* sysdeps/mach/hurd/jmp-unwind.c (_longjmp_unwind): Likewise.
* sysdeps/mach/hurd/sigaction.c: Likewise.
* sysdeps/mach/hurd/errnos.awk: Don't use ARGV in comment; it can
change meaninglessly.
* hurd/hurd/signal.h (struct hurd_sigstate): Replace critical section
flag with a spin lock.
(_hurd_critical_section_lock): Use spin_try_lock on that to see if we
get it. No need to take SS->lock at all.
(_hurd_critical_section_unlock): Unlock SS->critical_section_lock
instead of clearing the old flag member.
* hurd/hurdsig.c (_hurd_internal_post_signal): Use spin_lock_locked to
test the critical section state.
* hurd/hurdinit.c (_hurd_init): Set _hurdsig_traced from the intarray.
* hurd/hurdkill.c (_hurd_sig_post): Pass 0 sigcode in msg_sig_post.
* hurd/hurdsig.c (_hurd_internal_post_signal): Test _hurdsig_traced
instead of testing (_hurd_exec_flags & EXEC_TRACED).
(_S_msg_sig_post): Take sigcode arg and pass it through.
(_S_msg_sig_post_untraced): Likewise.
(reauth_proc): Don't pass proc port in auth_user_authenticate.
* hurd/setauth.c (_hurd_setauth): Don't pass object ports in
auth_user_authenticate RPCs, just the one-off rendezvous port.
* hurd/dtable.c (reauth_dtable): Likewise.
* hurd/hurdlookup.c (__hurd_file_name_lookup_retry): Likewise.
* hurd/hurdexec.c (_hurd_exec): Pass 0 flags to file_exec.
Pass sigcode arg to msg_sig_post.
* string/argz.h (argz_create): Use const in prototype.
* hurd/hurdinit.c (_hurd_proc_init): Test _hurdsig_traced instead of
testing (_hurd_exec_flags & EXEC_TRACED).
Pass sigcode arg to msg_sig_post.
* hurd/hurd.h: Declare _hurdsig_traced.
* string/argz.h (__argz_next): Cast ENTRY before returning it.
* hurd/hurd/signal.h (_hurd_critical_section_unlock): Pass sigcode arg
to msg_sig_post.
* hurd/path-lookup.c: New file.
* hurd/Makefile (routines): Add path-lookup.
* hurd/hurd/lookup.h: Declare file_name_path_scan,
hurd_file_name_path_lookup.
* hurd/hurd.h: Declare file_name_path_lookup.
* sysdeps/mach/hurd/select.c: The io_select rpc no longer has a TAG_ID
argument. Instead, use a separate reply port for each RPC and put them
all in a port set to wait for slow replies.
* dirent/scandir.c: Allocate dirents with correct size for name, and
copy with correct size.
* hurd/hurdinit.c [! PIC] (map0): New function, on _hurd_preinit_hook.
* stdio-common/vfscanf.c (TYPEMOD): New macro of all type modifier
flag bits.
(__vfscanf): Fix checking of extra type modifiers.
* time/asia, time/australasia, time/backward: Updated from ADO 96b.
Tue Jan 30 12:17:26 1996 Ulrich Drepper <drepper@ipd.info.uni-karlsruhe.de>
* stdlib/strtod.c: Only negate exponent when there really is one.
* stdio-common/vfscanf.c: Accept type modifiers on %n.
Fix FP number parsing.
* hurd/hurdsig.c (_hurd_internal_post_signal): For SIGNO == 0,
skip straight to pending check. When UNTRACED, resume process
from suspension first.
* intl/Makefile (headers): New variable, libintl.h.
[gettext-srcdir]: New rules to copy source from $(gettext-srcdir)/intl.
* configure.in: Check for --with-gettext arg.
Fri Nov 10 13:51:30 1995 Richard Stallman <rms@gnu.ai.mit.edu>
* malloc/malloc.c (get_contiguous_space): New function.
(morecore): Rewrite allocating new malloc info table.
(_malloc_internal): Use get_contiguous_space.
Fri Nov 10 13:03:40 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* hurd/hurdexec.c (_hurd_exec): If exec'ing self, pass
_hurd_msgport to be destroyed.
* Makerules (installed-libcs): Filter out %_pic.a.
* hurd/hurdinit.c (_hurd_proc_init): When traced, use msg_sig_post
to our msgport to take SIGTRAP, instead of _hurd_raise_signal.
* hurd/Makefile (user-interfaces): Add hurd/process_request.
* malloc/malloc.c (_malloc_internal): Performance fix. Move
if statement out of loop.
* stdio/_itoa.c, stdio/_itoa.h: Complete rewrite. Much faster
implementation using GMP functions. Contributed by
Torbjorn Granlund and Ulrich Drepper.
* stdio/test_rdwr.c: Include <errno.h>.
* sysdeps/i386/i586/Implies: New file.
New highly optimized string functions for i[345]86.
* sysdeps/i386/memchr.S, sysdeps/i386/memcmp.S: New files.
* sysdeps/i386/stpcpy.S, sysdeps/i386/stpncpy.S: New files.
* sysdeps/i386/strchr.S, sysdeps/i386/strcspn.S: New files.
* sysdeps/i386/strpbrk.S, sysdeps/i386/strrchr.S: New files.
* sysdeps/i386/strspn.S, sysdeps/i386/i486/strcat.S: New files.
* sysdeps/i386/i486/strlen.S, sysdeps/i386/i586/strchr.S: New files.
* sysdeps/i386/i586/strlen.S: New file.
* sysdeps/i386/memchr.c: Removed. There is now an assembler version.
* sysdeps/i386/i586/memcopy.h (WORD_COPY_BWD): Parameters did
not correspond to used values.
* sysdeps/unix/sysv/linux/nfs/nfs.h: New file. Simply a wrapper
around a kernel header file.
* sysdeps/unix/sysv/linux/Dist: Add it.
* sysdeps/unix/sysv/linux/Makefile [$(subdir)=sunrpc] (headers):
Likewise.
* sysdeps/unix/sysv/linux/local_lim.h: Rewrite. Instead of
defining ourself we use a kernel header file.
* sysdeps/unix/sysv/linux/i386/sysdep.h (DO_CALL): Optimize system
call handler for i586.
* sysdeps/unix/sysv/linux/sys/param.h: Add copyright and clean up.
Sat Oct 14 02:52:36 1995 Ulrich Drepper <drepper@ipd.info.uni-karlsruhe.de>
* malloc/malloc.c (_malloc_internal): Performance fix. Move
if statement out of loop.
* stdio/_itoa.c, stdio/_itoa.h: Complete rewrite. Much faster
implementation using GMP functions. Contributed by
Torbjorn Granlund and Ulrich Drepper.
* stdio/test_rdwr.c: Include <errno.h>.
* sysdeps/i386/i586/Implies: New file.
New highly optimized string functions for i[345]86.
* sysdeps/i386/memchr.S, sysdeps/i386/memcmp.S: New files.
* sysdeps/i386/stpcpy.S, sysdeps/i386/stpncpy.S: New files.
* sysdeps/i386/strchr.S, sysdeps/i386/strcspn.S: New files.
* sysdeps/i386/strpbrk.S, sysdeps/i386/strrchr.S: New files.
* sysdeps/i386/strspn.S, sysdeps/i386/i486/strcat.S: New files.
* sysdeps/i386/i486/strlen.S, sysdeps/i386/i586/strchr.S: New files.
* sysdeps/i386/i586/strlen.S: New file.
* sysdeps/i386/memchr.c: Removed. There is now an assembler version.
* sysdeps/i386/i586/memcopy.h (WORD_COPY_BWD): Parameters did
not correspond to used values.
* sysdeps/unix/sysv/linux/nfs/nfs.h: New file. Simply a wrapper
around a kernel header file.
* sysdeps/unix/sysv/linux/Dist: Add it.
* sysdeps/unix/sysv/linux/Makefile [$(subdir)=sunrpc] (headers):
Likewise.
* sysdeps/unix/sysv/linux/local_lim.h: Rewrite. Instead of
defining ourself we use a kernel header file.
* sysdeps/unix/sysv/linux/i386/sysdep.h (DO_CALL): Optimize system
call handler for i586.
* sysdeps/unix/sysv/linux/sys/param.h: Add copyright and clean up.
* stdio/vfscanf.c (%n): Use READ_IN - 1, so as not to count the
read-ahead character.
* hurd/dtable.c, hurd/getdport.c, hurd/hurd.h, hurd/hurdexec.c,
hurd/hurdinit.c, hurd/hurdprio.c, hurd/hurdsock.c,
hurd/ports-get.c, hurd/ports-set.c, hurd/setauth.c,
hurd/setuids.c, sysdeps/mach/hurd/i386/trampoline.c:
Get anal with unsigned to pacify compiler.
