These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Make the __morecore and __default_morecore symbols compat-only and
remove their declarations from the API. Also, include morecore.c
directly into malloc.c; this should ideally get merged into malloc in
a future cleanup.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Debugging interfaces: p_*, fp_*, and sym_* could conceivably be
used to produce debug out, but these functions have not been
updated to parse more resource records, so they are not very useful
today. Likewise for ns_sprintrr and ns_sprintrrf. ns_format_ttl and
ns_parse_ttl are related to these.
Internal implementation details: res_isourserver is probably only
useful in the implementation of a stub resolver, and so is
res_nameinquery.
Unclear semantics and bad performance: ns_samedomain, ns_subdomain,
ns_makecanon, ns_samename do textual converions & copies instead of
checking equivalence of the wire format.
inet_neta cannot handle IPv6 addresses.
res_hostalias has been superseded by getaddrinfo with AI_CANONNAME.
hostalias is not thread-safe.
Some functions have int as size arguments instead of size_t, so they
do not follow current coding practices. However, dn_expand and
b64_ntop are somewhat widely used (to name just two examples), so
deprecating them seems problematic.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch adds a way to close a range of file descriptors on
posix_spawn as a new file action. The API is similar to the one
provided by Solaris 11 [1], where the file action causes the all open
file descriptors greater than or equal to input on to be closed when
the new process is spawned.
The function posix_spawn_file_actions_addclosefrom_np is safe to be
implemented by iterating over /proc/self/fd, since the Linux spawni.c
helper process does not use CLONE_FILES, so its has own file descriptor
table and any failure (in /proc operation) aborts the process creation
and returns an error to the caller.
I am aware that this file action might be redundant to the current
approach of POSIX in promoting O_CLOEXEC in more interfaces. However
O_CLOEXEC is still not the default and for some specific usages, the
caller needs to close all possible file descriptors to avoid them
leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK
jspawnhelper [2] (where OpenJDK spawns a helper process to exactly
closes all file descriptors). Most likely any environment which calls
functions that might open file descriptor under the hood and aim to use
posix_spawn might face the same requirement.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html
[2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] 5238e95759/src/basic/fd-util.c (L217)
[2] ddf4b77e11/src/lxc/start.c (L236)
[3] 9e4f2f3a6b/Modules/_posixsubprocess.c (L220)
[4] 5f47c0613e/src/libstd/sys/unix/process2.rs (L303-L308)
[5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
It was added on Linux 5.9 (278a5fbaed89) with CLOSE_RANGE_CLOEXEC
added on 5.11 (582f1fb6b721f). Although FreeBSD has added the same
syscall, this only adds the symbol on Linux ports. This syscall is
required to provided a fail-safe way to implement the closefrom
symbol (BZ #10353).
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
The variable and function pair appear to provide a way for users to
set conditional breakpoints in mtrace when a specific address is
returned by the allocator. This can be achieved by using conditional
breakpoints in gdb so it is redundant. There is no documentation of
this interface in the manual either, so it appears to have been a hack
that got added to debug malloc. Deprecate these symbols and do not
call tr_break anymore.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
[1] https://austingroupbugs.net/view.php?id=62
The valgrind/helgrind test suite needs a way to make stack dealloction
more prompt, and this feature seems to be generally useful.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
ISO C2X has made some changes to the handling of feature test macros
related to features from the floating-point TSes, and to exactly what
such features are present in what headers, that require corresponding
changes in glibc.
* For the few features that were controlled by
__STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in
C2X, there is now instead a new feature test macro
__STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP.
This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I
implemented support for the new feature test macro for GCC 11) and
the totalorder and payload functions in <math.h>. C2X no longer
says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's
appropriate for that macro to continue to enable exactly the
features from TS 18661-1).
* The SNAN macros for each floating-point type have moved to <float.h>
(and been renamed in the process). Thus, the copies in <math.h>
should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for
C2X.
* The fmaxmag and fminmag functions have been removed (replaced by new
functions for the new min/max operations in IEEE 754-2019). Thus
those should also only be declared for
__STDC_WANT_IEC_60559_BFP_EXT__.
* The _FloatN / _FloatNx handling for the last two points in glibc is
trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X
(the integration of TS 18661-3 as an Annex, that is, which hasn't
yet been merged into the C standard git repository but has been
accepted by WG14), so C2X with that macro should not declare some
things that are declared for older standards with that macro. The
approach taken here is to provide the declarations (when
__STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined
__USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled
then those declarations (that are only in TS 18661-3 and not in C2X)
will only be provided if _GNU_SOURCE is defined as well. Thus
_GNU_SOURCE remains a superset of the TS features as well as of C2X.
Some other somewhat related changes in C2X are not addressed here.
There's an open proposal not to include the fmin and fmax functions
for the _FloatN / _FloatNx types, given the new min/max operations,
which could be handled like the previous point if adopted. And the
fromfp functions have been changed to return a result in floating type
rather than intmax_t / uintmax_t; my inclination there is to treat
that like that change of totalorder type (new symbol versions etc. for
the ABI change; old versions become compat symbols and are no longer
supported as an API).
Tested for x86_64 and x86.
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And deprecate it in <pthread.h>, redirecting it to sched_yield
for the time being.
The symbol was moved using scripts/move-symbol-to-libc.py.
No GLIBC_2.34 symbol version is added because of the compatibility
symbol status.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Previously, glibc would pick an arbitrary tmpfs file system from
/proc/mounts if /dev/shm was not available. This could lead to
an unsuitable file system being picked for the backing storage for
shm_open, sem_open, and related functions.
This patch introduces a new function, __shm_get_name, which builds
the file name under the appropriate (now hard-coded) directory. It is
called from the various shm_* and sem_* function. Unlike the
SHM_GET_NAME macro it replaces, the callers handle the return values
and errno updates. shm-directory.c is moved directly into the posix
subdirectory because it can be implemented directly using POSIX
functionality. It resides in libc because it is needed by both
librt and nptl/htl.
In the sem_open implementation, tmpfname is initialized directly
from a string constant. This happens to remove one alloca call.
Checked on x86_64-linux-gnu.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size
-----------------------------
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
void *copy_obj (const void *src, size_t alloc, size_t copysize)
{
void *obj = malloc (alloc);
memcpy (obj, src, copysize);
return obj;
}
Limitations
-----------
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
float_t supposedly represents the type that is used to evaluate float
expressions internally. While the isa supports single-precision float
operations, the port of glibc to s390 incorrectly deferred to the
generic definitions which, back then, tied float_t to double. gcc by
default evaluates float in single precision, so that scenario violates
the C standard (sections 5.2.4.2.2 and 7.12 in C11/C17). With
-fexcess-precision=standard, gcc evaluates float in double precision,
which aligns with the standard yet at the cost of added conversion
instructions.
With this patch, we drop the s390-specific definition of float_t and
defer to the default behavior, which aligns float_t with the
compiler-defined FLT_EVAL_METHOD in a standard-compliant way.
Checked on s390x-linux-gnu with 31-bit and 64-bit builds.
The IBM1364, IBM1371, IBM1388, IBM1390 and IBM1399 character sets
share converter logic (iconvdata/ibm1364.c) which would reject
redundant shift sequences when processing input in these character
sets. This led to a hang in the iconv program (CVE-2020-27618).
This commit adjusts the converter to ignore redundant shift sequences
and adds test cases for iconv_prog hangs that would be triggered upon
their rejection. This brings the implementation in line with other
converters that also ignore redundant shift sequences (e.g. IBM930
etc., fixed in commit 692de4b396).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
There is already RISC-V 64-bit port information in the documentation.
Let's add some documentation entries for the RISC-V 32-bit as well.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
After some discussions it seems the original news was not clear
and that it is valid to manually pass the branch protection flags
iff GCC target libs are built with them too. The main difference
between manually passing the flags and using the configure
option is that the latter also makes branch protection the
default in GCC which may not be desirable in some cases.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was fixed in commit d937694059
("Fix array overflow in backtrace on PowerPC (bug 25423)"), which
went into glibc 2.31.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Storing user databases in DNS, without client-side DNSSEC validation,
is problematic from a security point of view.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
__morecore, __after_morecore_hook, and __default_morecore had not
been deprecated in commit 7d17596c19
("Mark malloc hook variables as deprecated"), probably by accident.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The interface has hard-coded buffer sizes and is therefore tied to
DES. It also does not match current practice where different
services on the same host use different key material.
This change simplifies removal of the sunrpc code.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On platforms where long double may have two different formats, i.e.: the
same format as double (64-bits) or something else (128-bits), building
with -mlong-double-128 is the default and function calls in the user
program match the name of the function in Glibc. When building with
-mlong-double-64, Glibc installed headers redirect such calls to the
appropriate function.
Likewise, the internals of glibc are now built against IEEE long double.
However, the only (minimally) notable usage of long double is difftime.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add compiler feature tests to ensure we can build ieee128 long double.
These test for -mabi=ieeelongdouble, -mno-gnu-attribute, and -Wno-psabi.
Likewise, verify some compiler bugs have been addressed. These aren't
helpful for building glibc, but may cause test failures when testing
the new long double. See notes below from Raji.
On powerpc64le, some older compiler versions give error for the function
signbit() for 128-bit floating point types. This is fixed by PR83862
in gcc 8.0 and backported to gcc6 and gcc7. This patch adds a test
to check compiler version to avoid compiler errors during make check.
Likewise, test for -mno-gnu-attribute support which was
On powerpc64le, a few files are built on IEEE long double mode
(-mabi=ieeelongdouble), whereas most are built on IBM long double mode
(-mabi=ibmlongdouble, the default for -mlong-double-128). Since binutils
2.31, linking object files with different long double modes causes
errors similar to:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
The warnings are fair and correct, but in order for glibc to have
support for both long double modes on powerpc64le, they have to be
ignored. This can be accomplished with the use of -mno-gnu-attribute
option when building the few files that require IEEE long double mode.
However, -mno-gnu-attribute is not available in GCC 6, the minimum
version required to build glibc, so this patch adds a test for this
feature in powerpc64le builds, and fails early if it's not available.
Co-Authored-By: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Co-Authored-By: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This change should not have an effect because the system call was
never defined. Also add the misssing attribute_compat_text_section
attribute to the sstk function (a minor optimization). Also update the
NEWS file to document the change.
Fixes commit 9cc93ba097
("misc: Turn sstk into a compat symbol").
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Match up with list-fixed-bugs.py and also with the fact that many
email clients default to 72 chars when composing emails.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
