In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
[BZ #15442] This adds support for the inverse interpretation of the
quiet bit of IEEE 754 floating-point NaN data that some processors
use. This includes in particular MIPS architecture processors; the
payload used for the canonical qNaN encoding is updated accordingly
so as not to interfere with the quiet bit.
Seen in, e.g. ports/sysdeps/alpha/soft-fp/ots_mul.c.
The problem here is we have a switch on the class of X*Y, followed by
a switch on the class of R. The exponent field of R really is not set
by the first switch for NaN outputs, because we know it's not going to
be used. The compiler is not smart enough to see through this.
By pulling the exponent computation out of the NORMAL*NORMAL path, we
will not be pessimizing the most common case, while still providing an
arbitrary value to satisfy the compiler.
* soft-fp/soft-fp.h (FP_CUR_EXCEPTIONS): Define.
(FP_TRAPPING_EXCEPTIONS): Provide default implementation.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* soft-fp/op-common.h (_FP_PACK_SEMIRAW): Signal underflow for
subnormals only when inexact has been signalled or underflow
exceptions are enabled.
(_FP_PACK_CANONICAL): Likewise.
FP_UNPACK_SEMIRAW_DP): Use _FP_UNPACK_RAW_1 instead of
_FP_UNPACK_RAW_2, fix up first argument.
2008-12-01 Fredrik Unger <fred@tree.se>
* soft-fp/double.h [_FP_W_TYPE_SIZE >= 64] (FP_UNPACK_SEMIRAW_D,
FP_UNPACK_SEMIRAW_DP): Use _FP_UNPACK_RAW_1 instead of
_FP_UNPACK_RAW_2, fix up first argument.
with setting the sticky bit.
* math/test-misc.c (main): Add more truncation tests.
* soft-fp/floatunsidf.c (__floatunsidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatundidf.c (__floatundidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/extended.h (FP_UNPACK_RAW_E): Do not increase X##_e for
denormal operands. Do not generate FP_EX_DENORM exception.
(FP_UNPACK_RAW_EP): Ditto.
(FP_UNPACK_SEMIRAW_E): Use FP_UNPACK_RAW_E instead of
undefined _FP_UNPACK_RAW_E.
(FP_UNPACK_SEMIRAW_EP): Use FP_UNPACK_RAW_EP instead of
undefined _FP_UNPACK_RAW_EP.
(FP_PACK_SEMIRAW_E): Use FP_PACK_RAW_E instead of
undefined _FP_PACK_RAW_E.
(FP_PACK_SEMIRAW_EP): Use FP_PACK_RAW_EP instead of
undefined _FP_PACK_RAW_EP.
* op-2.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_2.
* op-4.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_4.
* soft-fp/op-common.h (FP_EXTEND): Do not abort when
_FP_EXPBIAS_##dfs == _FP_EXPBIAS_##sfs. Handle denormals for
this case.
* soft-fp/op-common.h (FP_TRUNC): Ditto.
* soft-fp/op-common.h (FP_TRUNC): Replace raising of FP_EX_INEXACT
with setting the sticky bit.
* math/test-misc.c (main): Add more truncation tests.
2007-04-14 Uros Bizjak <ubizjak@gmail.com>
* soft-fp/floatunsidf.c (__floatunsidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatundidf.c (__floatundidf): Use DFtype instead of
double in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/floatunsisf.c (__floatunsisf): Use SFtype instead of
float in the function declaration.
* soft-fp/extended.h (FP_UNPACK_RAW_E): Do not increase X##_e for
denormal operands. Do not generate FP_EX_DENORM exception.
(FP_UNPACK_RAW_EP): Ditto.
(FP_UNPACK_SEMIRAW_E): Use FP_UNPACK_RAW_E instead of
undefined _FP_UNPACK_RAW_E.
(FP_UNPACK_SEMIRAW_EP): Use FP_UNPACK_RAW_EP instead of
undefined _FP_UNPACK_RAW_EP.
(FP_PACK_SEMIRAW_E): Use FP_PACK_RAW_E instead of
undefined _FP_PACK_RAW_E.
(FP_PACK_SEMIRAW_EP): Use FP_PACK_RAW_EP instead of
undefined _FP_PACK_RAW_EP.
* op-2.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_2.
* op-4.h (_FP_FRAC_COPY_2_2): Define as alias to _FP_FRAC_COPY_4.
2007-04-16 Uros Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-common.h (FP_EXTEND): Do not abort when
_FP_EXPBIAS_##dfs == _FP_EXPBIAS_##sfs. Handle denormals for
this case.
* soft-fp/op-common.h (FP_TRUNC): Ditto.
2007-05-03 Jakub Jelinek <jakub@redhat.com>
values close to smallest double denormalized value to double.
* soft-fp/op-common.h (FP_TRUNC): Correct off-by-one error in
condition for truncating to 0. Set sticky bit for such
truncation.
2007-05-03 Jakub Jelinek <jakub@redhat.com>
* math/test-misc.c (main): Add tests for rounding long double
values close to smallest double denormalized value to double.
2007-04-30 Joseph Myers <joseph@codesourcery.com>
* soft-fp/op-common.h (FP_TRUNC): Correct off-by-one error in
condition for truncating to 0. Set sticky bit for such
truncation.
* soft-fp/op-common.h (FP_TRUNC): When truncating a NaN, clear
workbits in semi-raw fraction.
* math/test-misc.c: Add new tests.
* math/basic-test.c: Include test-skeleton.c.
(TEST_TRUNC): Define.
(truncdfsf_test, trunctfsf_test, trunctfdf_test): New.
(main): Rename to ...
(do_test): ...this. Run new tests.
(TEST_FUNCTION): Define.
[BZ #2749]
* soft-fp/op-4.h (__FP_FRAC_SUB_3, __FP_FRAC_SUB_4): Correct borrow
handling for high words.
* soft-fp/op-common.h (_FP_OVERFLOW_SEMIRAW): Always set inexact
and overflow for infinity.
2007-01-15 Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-common.h (FP_TRUNC): When truncating a NaN, clear
workbits in semi-raw fraction.
* math/test-misc.c: Add new tests.
2007-01-14 Steven Munroe <sjmunroe@us.ibm.com>
* math/basic-test.c: Include test-skeleton.c.
(TEST_TRUNC): Define.
(truncdfsf_test, trunctfsf_test, trunctfdf_test): New.
(main): Rename to ...
(do_test): ...this. Run new tests.
(TEST_FUNCTION): Define.
2006-10-05 Steven Munroe <sjmunroe@us.ibm.com>
Joe Kerian <jkerian@us.us.ibm.com>
[BZ #2749]
* soft-fp/op-4.h (__FP_FRAC_SUB_3, __FP_FRAC_SUB_4): Correct borrow
handling for high words.
* soft-fp/op-common.h (_FP_OVERFLOW_SEMIRAW): Always set inexact
and overflow for infinity.
New macros.
* sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise.
* soft-fp/soft-fp.h: Allow sfp-machine.h to define FP_RND_NEAREST
without defining FP_ROUNDMODE.
2002-10-08 Richard Henderson <rth@redhat.com>
* soft-fp/op-4.h: Handle carry correctly in
__FP_FRAC_ADD_3, __FP_FRAC_ADD_4, __FP_FRAC_SUB_3,
__FP_FRAC_SUB_4, __FP_FRAC_DEC_3, __FP_FRAC_DEC_4.
* soft-fp/op-common.h: New macros _FP_DIV_MEAT_N_loop.
2002-10-08 Aldy Hernandez <aldyh@redhat.com>
* configure.in: Compute completely-soft.
* config.make.in: Make completely-soft available to sub-makes.
* sysdeps/powerpc/soft-fp/Makefile: Add gcc-single-routines and
gcc-double-routines. Add sim-full.c. Add fenv_const and
fe_nomask to libm-support.
* sysdeps/powerpc/soft-fp/sim-full.c: New file.
* sysdeps/powerpc/soft-fp/fraiseexcpt.c: New file.
* sysdeps/powerpc/soft-fp/fegetexcept.c: New file.
* sysdeps/powerpc/soft-fp/fclrexcpt.c: New file.
* sysdeps/powerpc/soft-fp/ftestexcept.c: New file.
* sysdeps/powerpc/soft-fp/fgetexcptflg.c: New file.
* sysdeps/powerpc/soft-fp/fsetexcptflg.c: New file.
* sysdeps/powerpc/soft-fp/fedisblxcpt.c: New file.
* sysdeps/powerpc/soft-fp/feenablxcpt.c: New file.
* sysdeps/powerpc/soft-fp/fegetenv.c: New file.
* sysdeps/powerpc/soft-fp/fesetenv.c: New file.
* sysdeps/powerpc/soft-fp/fegetround.c: New file.
* sysdeps/powerpc/soft-fp/fesetround.c: New file.
* sysdeps/powerpc/soft-fp/feupdateenv.c: New file.
* sysdeps/powerpc/soft-fp/feholdexcpt.c: New file.
* sysdeps/powerpc/soft-fp/fenv_const.c: New file.
* sysdeps/powerpc/soft-fp/libm-test-ulps: New file.
* sysdeps/powerpc/soft-fp/Versions: Add libgcc soft-float
symbols. Add __sim_disabled_exceptions, __sim_exceptions,
__sim_round_mode.
* sysdeps/powerpc/soft-float/Dist: Add sim-full.c, fenv_const.c.
* sysdeps/powerpc/soft-float/sfp-machine.h: Define
FP_HANDLE_EXCEPTIONS.
Define FP_ROUNDMODE.
Redefine FP_* macros to correspond to the FE_* bit positions.
Define FP_DIV_MEAT_S to _FP_DIV_MEAT_1_loop.
Define externs for __sim_exceptions, __sim_disabled_exceptions,
__sim_round_mode, __simulate_exceptions.
* sysdeps/powerpc/fpu/bits/fenv.h: Move file from here...
* sysdeps/powerpc/bits/fenv.h: ...to here.
2002-10-06 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.c (__process_machine_rela):
Store R_PPC_UADDR32 and R_PPC_UADDR16 one byte at a time.
Use __builtin_expect for R_PPC_ADDR24 overflow check. Fix
R_PPC_ADDR16, R_PPC_UADDR16 and R_PPC_ADDR14* overflow check, use
__builtin_expect.
2002-05-17 David S. Miller <davem@redhat.com>
* sysdeps/unix/sysv/linux/sparc/fork.S: Define _internal aliases.
2002-05-16 David S. Miller <davem@redhat.com>
* sysdeps/sparc/sparc32/dl-machine.h (LOAD_PIC_REG): Define.
(elf_machine_dynamic): Use it to force PIC register to be loaded.
(elf_machine_load_address): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h: Mirror sparc32 changes.
* sysdeps/sparc/sparc64/strncmp.S: When second argument pointer
is unaligned, do not forget to fully initialize %g1 magic value.
* sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Fix 64-bit elf
register definitions and provide 32-bit variants of structures
during 64-bit builds.
* soft-fp/op-1.h (_FP_FRAC_CLEAR_OVERP_1): Define.
* soft-fp/op-2.h (_FP_FRAC_CLEAR_OVERP_2): Define.
* soft-fp/op-4.h (_FP_FRAC_CLEAR_OVERP_4): Define.
* soft-fp/op-common.h (_FP_PACK_CANONICAL): After rounding, if
_FP_FRAC_OVERP_X is set, use _FP_FRAC_CLEAR_OVERP_X to clear it.
(_FP_FROM_INT): Perform right shifts on unsigned integer type.
Do not clear implicit one bit here, it must be done post-rounding.
Only pad to the left using left shift if value uses less than the
available fractional bits.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2000-09-06 Andreas Jaeger <aj@suse.de>
* sysdeps/powerpc/Makefile [$(subdir) = elf]: Modify
sysdep-dl-routines and sysdep_routines instead of rtld-routines
and dl-routines.
* soft-fp/ChangeLog: Merged with this file.
2000-06-13 Ulrich Drepper <drepper@redhat.com>
* soft-fp/Makefile (distribute): Add op-8.h and testit.c.
* soft-fp/Makefile (distribute): Add the math functions, too.
* soft-fp/Makefile (distribute): Add ChangeLog, Banner, and configure.
2000-03-03 Geoff Keating <geoffk@cygnus.com>
* soft-fp/soft-fp.h (_FP_ROUND_ZERO): Cast 0 to void before using it
as a statement.
* soft-fp/sysdeps/powerpc/Makefile (routines): New file.
* soft-fp/sysdeps/powerpc/q_*: New files.
2000-09-05 Andreas Jaeger <aj@suse.de>
* sysdeps/sparc/sparc64/soft-fp/Versions: Use version glibc 2.2.
* soft-fp/configure: Remove.
* soft-fp/sysdeps/sparc/sparc64/qp_neg.S: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_neg.S: ... to here.
* soft-fp/sysdeps/sparc/sparc32/Makefile: Move from here...
* sysdeps/sparc/sparc32/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/powerpc/Makefile: Move from here...
* sysdeps/powerpc/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/sparc/sparc64/Makefile: Move from here...
* sysdeps/sparc/sparc64/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_neg.S: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_neg.S: ... to here.
* soft-fp/sysdeps/powerpc/q_add.c: Move from here...
* sysdeps/powerpc/soft-fp/q_add.c: ... to here.
* soft-fp/sysdeps/powerpc/q_cmp.c: Move from here...
* sysdeps/powerpc/soft-fp/q_cmp.c: ... to here.
* soft-fp/sysdeps/powerpc/q_cmpe.c: Move from here...
* sysdeps/powerpc/soft-fp/q_cmpe.c: ... to here.
* soft-fp/sysdeps/powerpc/q_div.c: Move from here...
* sysdeps/powerpc/soft-fp/q_div.c: ... to here.
* soft-fp/sysdeps/powerpc/q_dtoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_dtoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_feq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_feq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fge.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fge.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fgt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fgt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fle.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fle.c: ... to here.
* soft-fp/sysdeps/powerpc/q_flt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_flt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fne.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fne.c: ... to here.
* soft-fp/sysdeps/powerpc/q_itoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_itoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_lltoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_lltoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_mul.c: Move from here...
* sysdeps/powerpc/soft-fp/q_mul.c: ... to here.
* soft-fp/sysdeps/powerpc/q_neg.c: Move from here...
* sysdeps/powerpc/soft-fp/q_neg.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtod.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtod.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoi.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoi.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoll.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoll.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtos.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtos.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtou.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtou.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoull.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoull.c: ... to here.
* soft-fp/sysdeps/powerpc/q_sqrt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_sqrt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_stoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_stoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_sub.c: Move from here...
* sysdeps/powerpc/soft-fp/q_sub.c: ... to here.
* soft-fp/sysdeps/powerpc/q_ulltoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_ulltoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_util.c: Move from here...
* sysdeps/powerpc/soft-fp/q_util.c: ... to here.
* soft-fp/sysdeps/powerpc/q_utoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_utoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_add.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_add.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_cmp.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_cmp.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_cmpe.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_cmpe.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_div.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_div.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_dtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_dtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_feq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_feq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fge.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fge.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fgt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fgt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fle.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fle.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_flt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_flt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fne.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fne.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_itoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_mul.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_mul.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_neg.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_neg.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtod.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtod.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoi.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoi.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtos.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtos.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoui.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoux.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtox.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_sqrt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_stoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_stoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_sub.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_sub.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_uitoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_util.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_util.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_uxtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_xtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_add.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_add.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_cmp.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_cmp.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_cmpe.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_cmpe.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_div.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_div.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_dtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_dtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_feq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_feq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fge.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fge.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fgt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fgt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fle.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fle.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_flt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_flt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fne.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fne.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_itoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_itoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_mul.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_mul.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtod.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtod.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoi.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoi.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtos.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtos.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoui.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoui.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoux.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoux.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtox.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtox.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_sqrt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_sqrt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_stoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_stoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_sub.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_sub.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_uitoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_uitoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_util.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_util.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_uxtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_uxtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_xtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_xtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_frexpl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_frexpl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_ilogbl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_ilogbl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_scalblnl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_scalblnl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_scalbnl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c: ... to here.
* soft-fp/sysdeps/alpha/sfp-machine.h: Move from here...
* sysdeps/alpha/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/i386/sfp-machine.h: Move from here...
* sysdeps/i386/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/mips/mips64/sfp-machine.h: Move from here...
* sysdeps/mips/mips64/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/mips/sfp-machine.h: Move from here...
* sysdeps/mips/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/powerpc/sfp-machine.h: Move from here...
* sysdeps/powerpc/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/sparc/sparc32/sfp-machine.h: Move from here...
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/sparc/sparc64/sfp-machine.h: Move from here...
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/powerpc/Versions: Move from here...
* sysdeps/powerpc/soft-fp/Versions: ... to here.
* soft-fp/sysdeps/sparc/sparc64/Versions: Move from here...
* sysdeps/sparc/sparc64/soft-fp/Versions: ... to here.
* libio/oldiofsetpos64.c: iofsetpos was introduced in glibc 2.1,
change symbol version.
* libio/oldiofgetpos64.c: Likewise.
Reported by Martin v. Loewis <martin@loewis.home.cs.tu-berlin.de>.
* locale/programs/ld-ctype.c (charclass_charcode_ellipsis): Fix
typo.
Reported by dyky@kondara.org, closes PR libc/1886.
* stdlib/tst-strtod.c: Add testcases for denormal numbers from PR
libc/1880.
* configure.in: Compute sizeof-long-double.
* configure: Regenerated.
* config.make.in: Make sizeof-long-double available to sub-makes.
In libc/soft-fp/:
* soft-fp.h (_FP_ROUND_ZERO): Cast 0 to void before using it
as a statement.
* sysdeps/powerpc/Makefile (routines): New file.
* sysdeps/powerpc/q_*: New files.
2000-03-03 Geoff Keating <geoffk@cygnus.com>
* configure.in: Compute sizeof-long-double.
* configure: Regenerated.
* config.make.in: Make sizeof-long-double available to sub-makes.
2000-01-04 Andreas Jaeger <aj@suse.de>
* nss/nss_db/dummy-db.h (struct db24): Add missing field flags.
(struct db27): Add missing fields byteswapped, join and flags;
remove wrong member handleq.
(struct dbc27): Correct lock field.
* nss/makedb.c: Remove __P.
2000-01-04 Andreas Jaeger <aj@suse.de>
* nss/nss_db/db-open.c (internal_setent): Check for db_open for
success, fix a memory leak and clean up function.
2000-01-04 Ulrich Drepper <drepper@cygnus.com>
* Makefile (install): Pass $(install_root) to ldconfig.
Patch by Akira YOSHIYAMA <yosshy@tkf.att.ne.jp>.
2000-01-03 Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-1.h: Fix division for machines using not normalizing
version of udiv_qrnnd in longlong.h.
* soft-fp/sysdeps/mips/sfp-machine.h: Likewise.
* soft-fp/sysdeps/mips/mips64/sfp-machine.h: Likewise.
* soft-fp/sysdeps/sparc/sparc64/sfp-machine.h: Likewise.
Patch by Eddie C. Dost <ecd@skynet.be>.
* soft-fp/soft-fp.h (QItype, UQItype): New types used by longlong.h.
2000-01-03 Andreas Schwab <schwab@suse.de>
* sysdeps/generic/dl-sysdep.c: Initialize __libc_multiple_libcs,
needed for change in common symbol handing in newer binutils.
1999-12-29 Ulrich Drepper <drepper@cygnus.com>
* soft-fp/*: Tons of new files to implement floating-point arithmetic
in software.
Contributed by Richard Henderson, Jakub Jelinek and others.
