gen-auto-libm-tests presently allows but does not require underflow
exceptions for results with magnitude in the range (greatest
subnormal, least normal].
In some cases, the magnitude of the exact result is very slightly
above the least normal, but rounding in the implementation results in
it effectively computing an infinite-precision result that is slightly
below the least normal, so raising an underflow exception. This is in
accordance with the documented accuracy goals, but results in
testsuite failures.
This patch changes the logic to allow underflows when the mathematical
result is up to 0.5ulp above the least normal (so in any case where
the round-to-nearest result is the least normal). Ideally underflows
in all these cases would be accepted only when an underflow with the
actual result is consistent with the rounding mode (in FE_TOWARDZERO
mode, a return value of the least normal implies that the
infinite-precision result did not underflow so there should be no
underflow exception, for example), so as to match the documented goals
more precisely - whereas at present the tests for exceptions are
completely independent of the tests of the returned values. (The same
applies to overflow exceptions as well - they too should be checked
for consistency with the result, as in FE_TOWARDZERO mode a result
1ulp below the largest finite value should be inconsistent with an
overflow exception and cause a failure with overflow rather than
simply being considered a 1ulp error when overflow is expected.) But
the present patch at least deals with the cases causing spurious
failures so that (a) certain existing tests no longer need to be
marked as having spurious exceptions (such markings in
auto-libm-test-in end up applying to more cases than just those they
are needed for) and (b) log1p can be tested in all rounding modes
without introducing more such failures. This patch duly moves tests
of log1p to ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16357]
[BZ #16599]
* math/gen-auto-libm-tests.c (fp_format_desc): Add field
min_plus_half.
(fp_formats): Update initializers.
(init_fp_formats): Initialize new field.
(output_for_one_input_case): Allow underflow for results up to
min_plus_half.
* math/libm-test.inc (log1p_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Don't mark some underflows from asin and
atanh as spurious.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
My recent exp patch introduced warnings about implicit __isinf
declarations in exp because e_exp.c didn't include <math.h>. This
patch fixes this. Because <math.h> can't be included after
<math_private.h> (because of macro definitions of __nan*), it was
necessary to put an include in sysdeps/x86_64/fpu/multiarch/e_exp.c as
well.
Tested x86_64.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math.h>.
* sysdeps/x86_64/fpu/multiarch/e_exp.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
This fixes a bug in the way the results from __nscd_getai are collected:
for every returned result a new entry is first added to the
gaih_addrtuple list, but if that result doesn't match the request this
entry remains uninitialized. So for this non-matching result an extra
result with uninitialized content is returned.
To reproduce (with nscd running):
$ getent ahostsv4 localhost
127.0.0.1 STREAM localhost
127.0.0.1 DGRAM
127.0.0.1 RAW
(null) STREAM
(null) DGRAM
(null) RAW
To reproduce:
# ip li add name dummy0 type dummy
# site_id=$(head -c6 /dev/urandom | od -tx2 -An | tr ' ' ':')
# for ((i = 0; i < 65536; i++)) do
> ip ad ad $(printf fd80$site_id::%04x $i)/128 dev dummy0
> done
# (ulimit -s 900; getent ahosts localhost)
# ip li de dummy0
The dbl-64 version of exp needs round-to-nearest mode for its internal
computations, but that has the consequence of inappropriate
overflowing and underflowing results in other rounding modes. This
patch fixes this by recomputing the relevant results in cases where
the round-to-nearest result overflows to infinity or underflows to
zero (most of the diffs are actually just consequent reindentation).
Tests are enabled in all rounding modes for complex functions using
exp - but not for cexp because it turns out there are bugs causing
spurious underflows for cexp for some tests, which will need to be
fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have
similar bugs, just not shown by the present set of test inputs).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16284]
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original
rounding mode to recompute results that overflow to infinity or
underflow to zero.
* math/auto-libm-test-in: Don't mark tests as expected to fail for
bug 16284.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (ccos_test): Use ALL_RM_TEST.
(ccosh_test): Likewise.
(csin_test_data): Use plus_oflow.
(csin_test): Use ALL_RM_TEST.
(csinh_test_data): Use plus_oflow.
(csinh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes -Wundef warnings related to the _ABI* macros on MIPS.
GCC predefines only the _ABI* macro related to the ABI actually in
use, meaning that a conditional such as "#if _MIPS_SIM == _ABI64" is
true only for the ABI in question (all the macros are nonzero), but
produces a -Wundef warning for the other ABIs. The normal approach to
using these macros is to include <sgidefs.h>, which ensures that all
three _ABI* macros are defined rather than just one; this patch does
so in the places that caused warnings (the bulk of the warnings
arising from <bits/wordsize.h>). Tested that the warnings are fixed.
* sysdeps/mips/bits/wordsize.h: Include <sgidefs.h>.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/setrlimit64.c: Likewise.
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch add an optimized strpbrk for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance on
the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and memory
clear using VSX instructions.
This patch makes libm-test.inc tests of most functions use ALL_RM_TEST
unless there was some reason to defer that change for a particular
function.
I started out planning to defer the change for pow (bug 16315), cexp /
ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and
cpow (exact expectations for signs of exact zero results not wanted).
Testing on x86_64 and x86 showed additional failures for acosh, cacos,
catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn,
so making the change for those functions was deferred as well, pending
investigation to show which of these represent distinct bugs (some
such bugs may already be filed) and appropriate fixing / XFAILing.
Failures include wrong signs of zero results, errors slightly above
the 9ulp bound (in such cases it may make sense for functions to set
round-to-nearest internally to reduce error accumulation), large
errors and incorrect overflow/underflow for the rounding mode (with
consequent missing errno settings in some cases). It's possible some
could be issues with test expectations, though I didn't notice any
that were obviously like that (I added NO_TEST_INLINE for cases that
were failing for ildoubl on x86 and where it seemed reasonable for
them to fail for the fast-math inlines).
There may of course be failures on other architectures for functions
that didn't fail on x86_64 or x86, in which case the usual rule
applies: file a bug (preferably identifying the underlying problem
function, in cases where function A calls function B and a problem
with function B may present in the test results for function A) if not
already in Bugzilla then fix or XFAIL.
Tested x86_64 and x86 and ulps updated accordingly.
* math/libm-test.inc (asinh_test): Use ALL_RM_TEST.
(atan_test): Likewise.
(atanh_test_data): Use NO_TEST_INLINE for two tests.
(atanh_test): Use ALL_RM_TEST.
(atan2_test_data): Likewise.
(cabs_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(cbrt_test): Likewise.
(csqrt_test): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(hypot_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(sincos_test): Likewise.
(tanh_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch add a optimized strcspn for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance
on the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and align
stack memory to table to 16 bytes (so VSX clean can ran without
alignment issues).
Reviewing (for all architectures, with a baseline kernel version of
2.6.32) the kernel support for features for which __ASSUME_* macros
would be affected by a move to 2.6.32 as minimum kernel version showed
up that __ASSUME_PREADV and __ASSUME_PWRITEV were wrongly defined for
MicroBlaze (despite the corresponding syscall table entries not being
wired up in the kernel) and Alpha for 2.6.30 and above (although the
support on Alpha was added in 2.6.33). This patch makes the
kernel-features.h files undefine those macros for appropriate
versions.
[BZ #16649]
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PREADV): Undefine.
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PWRITEV): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_PREADV): Undefine.
(__ASSUME_PWRITEV): Likewise.
This comment appears to have been copied from the ARM port where it
makes more sense.
2014-03-18 Will Newton <will.newton@linaro.org>
* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Remove
inaccurate comment.
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* sysdeps/generic/math_private.h: Check whether
HAVE_RM_CTX is defined with #ifdef rather
than #if.
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* sysdeps/generic/ldsodefs.h: Check whether
HP_SMALL_TIMING_AVAIL is defined with #ifdef rather
than #if.
The roundl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_roundl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_roundl.c instead fixes the failing math.
This fixes 16707.
The nearbyintl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c instead fixes the failing
math.
Fixes BZ#16706.
The ceill assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_ceill.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_ceill.c instead fixes the failing math.
Fixes BZ#16701.
It checks AVX-512 assembler support first and sets libc_cv_cc_avx512 to
$libc_cv_asm_avx512, instead of yes. GCC won't support AVX-512 if
assembler doesn't support it.
* sysdeps/x86_64/configure.ac: Check AVX-512 assembler support
first. Disable AVX-512 GCC support if assembler doesn't support
it.
* sysdeps/x86_64/configure: Regenerated.
AVX-512 ISA adds 512-bit zmm registers. This patch updates
_dl_runtime_profile to pass zmm registers to run-time audit. It also
changes _dl_x86_64_save_sse and _dl_x86_64_restore_sse to upport zmm
registers, which are called when only when RTLD_PREPARE_FOREIGN_CALL
is used. Its performance impact is minimum.
* config.h.in (HAVE_AVX512_SUPPORT): New #undef.
(HAVE_AVX512_ASM_SUPPORT): Likewise.
* sysdeps/x86_64/bits/link.h (La_x86_64_zmm): New.
(La_x86_64_vector): Add zmm.
* sysdeps/x86_64/Makefile (tests): Add tst-audit10.
(modules-names): Add tst-auditmod10a and tst-auditmod10b.
($(objpfx)tst-audit10): New target.
($(objpfx)tst-audit10.out): Likewise.
(tst-audit10-ENV): New.
(AVX512-CFLAGS): Likewise.
(CFLAGS-tst-audit10.c): Likewise.
(CFLAGS-tst-auditmod10a.c): Likewise.
(CFLAGS-tst-auditmod10b.c): Likewise.
* sysdeps/x86_64/configure.ac: Set config-cflags-avx512,
HAVE_AVX512_SUPPORT and HAVE_AVX512_ASM_SUPPORT.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Add
AVX-512 zmm register support.
(_dl_x86_64_save_sse): Likewise.
(_dl_x86_64_restore_sse): Likewise.
* sysdeps/x86_64/dl-trampoline.h: Updated to support different
size vector registers.
* sysdeps/x86_64/link-defines.sym (YMM_SIZE): New.
(ZMM_SIZE): Likewise.
* sysdeps/x86_64/tst-audit10.c: New file.
* sysdeps/x86_64/tst-auditmod10a.c: Likewise.
* sysdeps/x86_64/tst-auditmod10b.c: Likewise.
Reviewing (for all architectures, with a baseline kernel version of
2.6.32) the kernel support for features for which __ASSUME_* macros
would be affected by a move to 2.6.32 as minimum kernel version showed
up that __ASSUME_PSELECT was wrongly defined for MicroBlaze, despite
the corresponding syscall table entry not being wired up in the
MicroBlaze kernel.
This patch makes the MicroBlaze kernel-features.h undefine
__ASSUME_PSELECT. I'd also encourage wiring it up in the kernel (so
you can then make this #undef conditional, and eventually obsolete
once a recent-enough kernel is required). I suspect it wasn't wired
up because of the mistaken comment in asm/unistd.h "obsolete ->
sys_pselect7" (there is no such syscall as pselect7).
[BZ #16642]
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_PSELECT): Undefine.
This patch fixes an issue for powerpc32-fpu static build which fails
with an 'bzero' undefined reference. This patch adds bzero ifunc selector
for static builds and fixes the '__bzero_ppc' reference to default
memset symbol (since static memset build does not provide ifunc
selector).
Fixes BZ#16689.
Testing on mips64 showed missing underflow exceptions (from exp, for
example) in non-default rounding modes, caused by
libc_feresetround*_ctx wrongly restoring a saved environment without
preserving exceptions, when that's only valid for the _noex variants.
(I don't know why Steve didn't see this in his testing.) This patch
fixes this by using libc_feupdateenv_mips_ctx for the relevant macros
and removing the problem definitions.
The problem definitions aren't suitable for the _noex macros either
because they only discard exceptions in non-default rounding modes,
and while for some uses of *_noex/*_NOEX it doesn't matter whether
exceptions are discarded, dbl-64/e_remainder.c requires
SET_RESTORE_ROUND_NOEX to cause exceptions to be discarded. I think
the accumulated set of macros / functions for optimized exception /
rounding mode handling could do with a careful review by now, and
possible refactoring, and at least one new feature (extracting the
saved rounding mode from an environment / context variable - see
dbl-64/e_sqrt.c for a case where this could be used).
Tested mips64.
* sysdeps/mips/math_private.h [__mips_hard_float]
(libc_feresetround_ctx): Define to libc_feupdateenv_mips_ctx not
libc_feresetround_mips_ctx.
[__mips_hard_float] (libc_feresetroundf_ctx): Likewise.
[__mips_hard_float] (libc_feresetroundl_ctx): Likewise.
[__mips_hard_float] (libc_feresetround_mips_ctx): Remove.
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
This patch fixes an issue for powerpc64[le] static build where __bzero
is definied in multiple places (memset-ppc64.o and bzero.o). It is now
defined only in bzero.o and memset-ppc64.o only defined __bzero_ppc for
both dynamic and static library.
Fixes BZ#16683.
The optimization is achieved by following techniques:
> hashing of needle.
> hashing avoids scanning of duplicate entries in needle across the string.
> initializing the hash table with Vector instructions (VSX) by quadword access.
> unrolling when scanning for character in string across hash table.
The optimization is achieved by following techniques:
1. Doubleword aligned memory access and compares using
cmpb instruction.
2. Loop unrolling for byte load/store.
3. CPU pre-fetch to avoid cache miss.
This patch fix the optimized powerpc-fpu modf/modff implementation
when using in non-default rounding mode where the zero sign is not
as expected. It fixes the libm testsuite tests
modf_downward (0) == 0.00000000000000000000e+00
modf_downward (20) == 0.00000000000000000000e+00
modf_downward (21) == 0.00000000000000000000e+00
Where the sign returned was negative.
Trapping exceptions in AArch64 are optional. The relevant exception
control bits in FPCR are are defined as RES0 hence the absence of
support can be detected by reading back the FPCR and comparing with
the desired value.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
The __ASSUME_UTIMES macro describes whether the utimes syscall is
present. For linux-generic architectures, it isn't (utimensat is
instead), so the macro should not be defined for them; this patch
removes the spurious definitions for such architectures. (Those
definitions don't actually cause any user-visible bug, because
futimes.c doesn't use __ASSUME_UTIMES if __ASSUME_UTIMENSAT is
defined, and futimesat.c and utimes.c are overridden for
linux-generic, but the definitions are still logically incorrect.)
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_UTIMES): Remove.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_UTIMES): Likewise.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
This patch add a optimized llround/llroundf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized llrint/llrintf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized finite/finitef implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized isinf/isinff implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
