And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is the default since 2.26 and it has bitrotten over the years,
By using it multiple malloc tests fails:
FAIL: malloc/tst-memalign-2
FAIL: malloc/tst-memalign-2-malloc-hugetlb1
FAIL: malloc/tst-memalign-2-malloc-hugetlb2
FAIL: malloc/tst-memalign-2-mcheck
FAIL: malloc/tst-mxfast-malloc-hugetlb1
FAIL: malloc/tst-mxfast-malloc-hugetlb2
FAIL: malloc/tst-tcfree2
FAIL: malloc/tst-tcfree2-malloc-hugetlb1
FAIL: malloc/tst-tcfree2-malloc-hugetlb2
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch makes build-many-glibcs.py use the new MPFR 4.2.0 and MPC
1.3.1 releases.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
The only way to override LD, AR, OBJCOPY, and GPROF is through
--with-binutils (setting the environments variables on configure is
overridden by LIBC_PROG_BINUTILS).
The build-many-glibcs.py (bmg) glibcs option generates a working config,
but not fully concise (some tools will be set from environment variable,
while other will be set from $CC --print-prog-name). So remove the
environment variable set to always use the "$CC --print-prog-name".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The assembler is not issued directly, but rather always through CC
wrapper. The binutils version check if done with LD instead.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch makes build-many-glibcs.py use binutils 2.39 branch.
Tested with build-many-glibcs.py (compilers and glibcs builds). Note:
binutils 2.39 shows the same failures for i686-linux-gnu-no-pie,
x86_64-linux-gnu-no-pie and x86_64-linux-gnu-x32-no-pie building the
glibc testsuite as binutils mainline does.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I (and maybe one or two others) added a (C) to the copyright notice
regardless of the contribution checklist[1] not mentioning it. Fix all
these instances so that the notice reads as "Copyright The GNU Toolchain
Authors" across the source code.
[1] https://sourceware.org/glibc/wiki/Contribution%20checklist
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Starting from GCC 12, the .init_array and .fini_array sections are enabled
unconditionally by
commit 13a39886940331149173b25d6ebde0850668d8b9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Jun 8 16:09:24 2021 -0700
Always enable DT_INIT_ARRAY/DT_FINI_ARRAY on Linux
configure GCC with --enable-initfini-array to enable them when using GCC
release branches.
Fixes BZ #27945.
The renaming of installed shared libraries to use the SONAME directly
rather than linking to a versioned name stopped build-many-glibcs.py
--strip (used to facilitate comparing binaries before and after
changes that aren't meant to change any generated code in installed
glibc shared libraries) from stripping most of the installed shared
libraries, because it stripped only the *.so names. Fix it to strip
*.so* names instead and to detect the case of linker scripts using
grep instead of hardcoding particular files that are linker scripts.
Tested with build-many-glibcs.py --strip.
This patch makes build-many-glibcs.py use Linux 5.12 and GCC 11
branch.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
The -O option avoids interleaving (e.g.) compiler error messages
with other build messages, and makes attribution of messages to
commands easier.
According to my tests, the impact on build time is within the noise.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
This patch makes build-many-glibcs.py use the recent GMP 6.2.1
release.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
Support building three variants of 32-bit RISC-V glibc as follows:
- riscv32-linux-gnu-rv32imac-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32d
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
On s390x, gcc inlines more aggresive compared to other architectures.
This occaisionally leads to build warnings / errors.
Therefore this patch adds a s390x glibc variant with optimization.
There is the ccopts field which contain ABI options which are passed
to configure as CC / CXX. Now there is also the cflags field which
contains non-ABI options like -g or -O. Those are passed to configure
as CFLAGS / CXXFLAGS.
Currently CC is passed to conformtest.py or linknamespace.py but not
the CFLAGS.
