Commit Graph

22 Commits

Author SHA1 Message Date
Siddhesh Poyarekar
0005e54f76 manual: Drop obsolete @refill
The @refill command has been obsolete for a while and now texinfo has
started warning about it.

Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2022-01-12 14:28:44 +05:30
Florian Weimer
010fe23177 manual: Use @code{errno} instead of @var{errno} [BZ #24063]
@var is intended for placeholders (such as function parameters).
Actual variables need to use @code because @var causes upper-case
output, resulting in a different C identifier.
2019-01-07 11:42:04 +01:00
Adhemerval Zanella
9995c839a0 manual: Document getcontext uc_stack value on Linux [BZ #759]
As decribed in BZ#759, Linux getcontext implementation on Linux does
differs from other SysV system about the returned uc_stack.  This is
true not only for i386, but for all the architecture I could actually
check (aarch64, arm, alpha, hppa, m68k, mips, mips64, mips64n32,
powerpc, powerpc64, powerpc64le, s390x, sh, sparc, sparc64, and x86).

And I think we should not change current behavior for some reasons:

1. POSIX 2008 removed this SySV interface for a good reason and changing
   this behavior adds nothing for current portable code.  POSIX 2001
   specification does states that stack should be saved [1] and current
   GLIBC code does in a arch-specific manner (inside the mcontext_t)
   which allows the setcontext to work correctly.

2. Changing this behavior would potentially require compat symbols and
   I see no gain in adding compat symbols for deprecated interfaces.

3. Also, for comment #2 in BZ#759, it is up to kernel do setup the contents
   for ucontext_t and currently it does not provide the stack information
   as well.  Trying to change it is also another fix that does not worth
   the possible gains.

Instead my proposal is to make it clear the current interface may differ
depending of the underlying operational system.

glibc documentation and close this bug as invalid.

	[BZ #759]
	* manual/setjmp.texi (getcontex): Document uc_stack value on Linux.

[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/getcontext.html
2017-08-08 16:16:43 -03:00
Rical Jasan
d08a7e4cbe manual: Replace summary.awk with summary.pl.
The Summary is now generated from @standards, and syntax-checking is
performed.  If invalid @standards syntax is detected, summary.pl will
fail, reporting all errors.  Failure and error reporting is disabled
for now, however, since much of the manual is still incomplete
wrt. header and standards annotations.

Note that the sorting order of the Summary has changed; summary.pl
respects the locale, like summary.awk did, but the use of LC_ALL=C is
introduced in the Makefile.  Other notable deviations are improved
detection of the annotated elements' names, which are used for
sorting, and improved detection of the @node used to reference into
the manual.  The most noticeable difference in the rendered Summary is
that entries may now contain multiple lines, one for each header and
standard combination.

summary.pl accepts a `--help' option, which details the expected
syntax of @standards.  If errors are reported, the user is directed to
this feature for further information.

	* manual/Makefile: Generate summary.texi with summary.pl.
	Force use of the C locale.  Update Perl dependency comment.
	* manual/header.texi: Update reference to summary.awk.
	* manual/macros.texi: Refer authors to `summary.pl --help'.
	* manual/summary.awk: Remove file.
	* manual/summary.pl: New file.  Generate summary.texi, and
	check for @standards-related syntax errors.
	* manual/argp.texi: Convert header and standards @comments to
	@standards.
	* manual/arith.texi: Likewise.
	* manual/charset.texi: Likewise.
	* manual/conf.texi: Likewise.
	* manual/creature.texi: Likewise.
	* manual/crypt.texi: Likewise.
	* manual/ctype.texi: Likewise.
	* manual/debug.texi: Likewise.
	* manual/errno.texi: Likewise.
	* manual/filesys.texi: Likewise.
	* manual/getopt.texi: Likewise.
	* manual/job.texi: Likewise.
	* manual/lang.texi: Likewise.
	* manual/llio.texi: Likewise.
	* manual/locale.texi: Likewise.
	* manual/math.texi: Likewise.
	* manual/memory.texi: Likewise.
	* manual/message.texi: Likewise.
	* manual/pattern.texi: Likewise.
	* manual/pipe.texi: Likewise.
	* manual/process.texi: Likewise.
	* manual/resource.texi: Likewise.
	* manual/search.texi: Likewise.
	* manual/setjmp.texi: Likewise.
	* manual/signal.texi: Likewise.
	* manual/socket.texi: Likewise.
	* manual/startup.texi: Likewise.
	* manual/stdio.texi: Likewise.
	* manual/string.texi: Likewise.
	* manual/sysinfo.texi: Likewise.
	* manual/syslog.texi: Likewise.
	* manual/terminal.texi: Likewise.
	* manual/threads.texi: Likewise.
	* manual/time.texi: Likewise.
	* manual/users.texi: Likewise.
2017-06-15 21:26:20 -07:00
Rical Jasan
a96ce75c8e Manual typos: Non-Local Exits
2016-05-06  Rical Jasan  <ricaljasan@pacific.net>

	* manual/setjmp.texi: Fix typos in the manual.
2016-10-06 12:17:29 +05:30
Will Newton
7c6776620d manual/setjmp.texi: Clarify setcontext and signal handlers text
Calling setcontext from a signal handler can be done safely so
it is sufficient to note that it is not recommended.

Also mention in setcontext documentation that the behaviour of
setcontext when restoring a context created by a call to a signal
handler is unspecified.

2014-04-17  Will Newton  <will.newton@linaro.org>

	* manual/setjmp.texi (System V contexts): Add note that
	calling setcontext on a context created by a call to a
	signal handler is undefined.  Update text to note that
	setcontext from a signal handler is possible but not
	recommended.
2014-04-17 11:40:36 +01:00
Will Newton
6f918f367a manual/setjmp.texi: Improve clarity of Sys V context doc
ChangeLog:

2014-03-13  Will Newton  <will.newton@linaro.org>

	* manual/setjmp.texi (System V contexts): Improve
	clarity and grammar of documentation.
2014-03-13 10:39:47 +00:00
Mike Frysinger
6349768c8b manual: setjmp: fix typos/grammar
Should hopefully be all obvious stuff.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-02-08 07:59:36 -05:00
Alexandre Oliva
542210fbc5 * manual/setjmp.texi: Document MTASC-safety properties. 2014-01-31 23:49:07 -02:00
Ville Skytta
9dcc8f116c Fix spelling in manual, as in bug 16376 2013-12-30 15:42:26 +01:00
Thomas Schwinge
dc97c227c9 setcontext: Clarify termination when uc_link is the null pointer. 2012-07-17 10:05:55 +02:00
Andreas Jaeger
67f60a26d4 Fix typo in manual
[BZ # 13938]
* manual/setjmp.texi (System V contexts): Fix sentence.
2012-04-03 09:43:38 +02:00
Joseph Myers
a7a93d5086 Clean up glibc manual references to "GNU system" (bug 6911). 2012-03-08 01:27:38 +00:00
Joseph Myers
1f77f0491f Use Texinfo macros to refer to the GNU C Library within the manual. 2012-02-28 14:44:20 +00:00
Andreas Jaeger
0bc93a2fb1 Update.
2001-05-21  Andreas Jaeger  <aj@suse.de>

	* locale/programs/ld-collate.c (handle_ellipsis): Fix message.
	Patch by Philipp Thomas <pthomas@suse.de>.
2001-05-21 17:38:30 +00:00
Ulrich Drepper
eacde9d081 Update.
2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* sysdeps/unix/sysv/linux/cris/Dist: New file.
	* sysdeps/unix/sysv/linux/cris/Makefile: New file.
	* sysdeps/unix/sysv/linux/cris/_G_config.h: New file.
	* sysdeps/unix/sysv/linux/cris/bits/fcntl.h: New file.
	* sysdeps/unix/sysv/linux/cris/bits/mman.h: New file.
	* sysdeps/unix/sysv/linux/cris/bits/resource.h: New file.
	* sysdeps/unix/sysv/linux/cris/brk.c: New file.
	* sysdeps/unix/sysv/linux/cris/chown.c: New file.
	* sysdeps/unix/sysv/linux/cris/clone.S: New file.
	* sysdeps/unix/sysv/linux/cris/fchown.c: New file.
	* sysdeps/unix/sysv/linux/cris/fcntl.c: New file.
	* sysdeps/unix/sysv/linux/cris/fxstat.c: New file.
	* sysdeps/unix/sysv/linux/cris/getegid.c: New file.
	* sysdeps/unix/sysv/linux/cris/geteuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/getgid.c: New file.
	* sysdeps/unix/sysv/linux/cris/getgroups.c: New file.
	* sysdeps/unix/sysv/linux/cris/getresgid.c: New file.
	* sysdeps/unix/sysv/linux/cris/getresuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/getrlimit.c: New file.
	* sysdeps/unix/sysv/linux/cris/getrlimit64.c: New file.
	* sysdeps/unix/sysv/linux/cris/getuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/lchown.c: New file.
	* sysdeps/unix/sysv/linux/cris/lockf64.c: New file.
	* sysdeps/unix/sysv/linux/cris/lxstat.c: New file.
	* sysdeps/unix/sysv/linux/cris/mmap.S: New file.
	* sysdeps/unix/sysv/linux/cris/mmap64.S: New file.
	* sysdeps/unix/sysv/linux/cris/msgctl.c: New file.
	* sysdeps/unix/sysv/linux/cris/profil-counter.h: New file.
	* sysdeps/unix/sysv/linux/cris/register-dump.h: New file.
	* sysdeps/unix/sysv/linux/cris/semctl.c: New file.
	* sysdeps/unix/sysv/linux/cris/setegid.c: New file.
	* sysdeps/unix/sysv/linux/cris/seteuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setfsgid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setfsuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setgid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setgroups.c: New file.
	* sysdeps/unix/sysv/linux/cris/setregid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setresgid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setresuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setreuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/setrlimit.c: New file.
	* sysdeps/unix/sysv/linux/cris/setuid.c: New file.
	* sysdeps/unix/sysv/linux/cris/shmctl.c: New file.
	* sysdeps/unix/sysv/linux/cris/socket.S: New file.
	* sysdeps/unix/sysv/linux/cris/sys/ucontext.h: New file.
	* sysdeps/unix/sysv/linux/cris/syscall.S: New file.
	* sysdeps/unix/sysv/linux/cris/sysdep.S: New file.
	* sysdeps/unix/sysv/linux/cris/sysdep.h: New file.
	* sysdeps/unix/sysv/linux/cris/vfork.S: New file.
	* sysdeps/unix/sysv/linux/cris/xstat.c: New file.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* sysdeps/cris/Dist: New file.
	* sysdeps/cris/Implies: New file.
	* sysdeps/cris/Makefile: New file.
	* sysdeps/cris/__longjmp.S: New file.
	* sysdeps/cris/_mcount.S: New file.
	* sysdeps/cris/bits/endian.h: New file.
	* sysdeps/cris/bits/setjmp.h: New file.
	* sysdeps/cris/bits/string.h: New file.
	* sysdeps/cris/dl-machine.h: New file.
	* sysdeps/cris/elf/start.S: New file.
	* sysdeps/cris/machine-gmon.h: New file.
	* sysdeps/cris/memcopy.h: New file.
	* sysdeps/cris/memusage.h: New file.
	* sysdeps/cris/setjmp.S: New file.
	* sysdeps/cris/sysdep.h: New file.
	* sysdeps/cris/wordcopy.c: New file.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* elf/elf.h: Add new relocations for CRIS.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* shlib-versions: Add cases for Linux on CRIS.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* configure.in (ASM_LINE_SEP tests): Handle CRIS assembly, with
	';' for comments and '@' for line separator.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* sysdeps/unix/sysv/linux/hppa/sysdep.h (INLINE_SYSCALL): Fix
	typo; s/==/=/ for assignment.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* malloc/Makefile: Correct comment; mtrace is Perl, not AWK.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* iconv/gconv_simple.c (internal_ucs4_loop_unaligned): Check for
	empty input before checking full output.

2001-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* iconv/gconv.c (__gconv): Don't derefer parameter cd before
	checking if == -1L.

2001-04-08  Ulrich Drepper  <drepper@redhat.com>

	* inet/rexec.c (rexec_af): Avoid calling perror with errno being set.
2001-04-09 04:55:59 +00:00
Ulrich Drepper
5ce8f2039b Update.
* manual/Makefile (chapters): Add resource.

	* manual/time.texi: Move section on resources to...
	* manual/resource.texi: ...here.  New file.
	* manual/setjmp.texi: Adjust back reference.
	Patch by Bryan Henderson <bryanh@giraffe-data.com>.
2000-04-18 04:27:22 +00:00
Ulrich Drepper
76c23bacd8 Update.
* manual/setjmp.texi: Many changes to correct bad English introduced
	mainly by me.
	* manual/time.texi: Likewise.
	Patches by Neil Booth <neil@rosenet.ne.jp>.
1999-11-25 07:59:22 +00:00
Ulrich Drepper
d07e37e2df Update.
1999-02-15  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* manual/llio.texi (Waiting for I/O): Correct meaning.  Patch by
	Jochen Voss <voss@mathematik.uni-kl.de> [PR libc/969].

	* manual/setjmp.texi (Non-Local Exits and Signals): Fix
	typo.  Patch by Jochen Voss <voss@mathematik.uni-kl.de> [PR libc/970].
1999-02-15 09:25:37 +00:00
Ulrich Drepper
7a68c94a5b Update.
1998-07-10 18:14 -0400  Zack Weinberg  <zack@rabi.phys.columbia.edu>

	* manual/Makefile: Overhauled.  Generate libc.texinfo from the
	chapter files.  Exorcise the chapters, chapters-incl mess.
	Support inserting doc chapters from add-on modules.
	(chapters): New variable.
	(add-chapters): New variable.
	(appendices): New variable.
	(libc.texinfo): New target.
	(clean): Fix bugs.
	(realclean): Fix bugs.

	* manual/texis.awk: New file.
	* manual/libc-texinfo.sh: New file.
	* manual/libc-texinfo.in: New file.

	* manual/conf.texi (top @node): Remove next pointer.
	* manual/lang.texi (top @node): Remove prev pointer.

	* manual/job.texi (top @node): Add explicit pointers.
	* manual/message.texi (top @node): Add explicit pointers.
	* manual/nss.texi (top @node): Add explicit pointers.
	* manual/process.texi (top @node): Add explicit pointers.
	* manual/startup.texi (top @node): Add explicit pointers.
	* manual/terminal.texi (top @node): Add explicit pointers.
	* manual/users.texi (top @node): Add explicit pointers.

	* manual/arith.texi: Add %MENU% tag.
	* manual/conf.texi: Add %MENU% tag.
	* manual/contrib.texi: Add %MENU% tag.
	* manual/ctype.texi: Add %MENU% tag.
	* manual/errno.texi: Add %MENU% tag.
	* manual/filesys.texi: Add %MENU% tag.
	* manual/header.texi: Add %MENU% tag.
	* manual/install.texi: Add %MENU% tag.
	* manual/intro.texi: Add %MENU% tag.
	* manual/io.texi: Add %MENU% tag.
	* manual/job.texi: Add %MENU% tag.
	* manual/lang.texi: Add %MENU% tag.
	* manual/llio.texi: Add %MENU% tag.
	* manual/locale.texi: Add %MENU% tag.
	* manual/maint.texi: Add %MENU% tag.
	* manual/math.texi: Add %MENU% tag.
	* manual/mbyte.texi: Add %MENU% tag.
	* manual/memory.texi: Add %MENU% tag.
	* manual/message.texi: Add %MENU% tag.
	* manual/nss.texi: Add %MENU% tag.
	* manual/pattern.texi: Add %MENU% tag.
	* manual/pipe.texi: Add %MENU% tag.
	* manual/process.texi: Add %MENU% tag.
	* manual/search.texi: Add %MENU% tag.
	* manual/setjmp.texi: Add %MENU% tag.
	* manual/signal.texi: Add %MENU% tag.
	* manual/socket.texi: Add %MENU% tag.
	* manual/startup.texi: Add %MENU% tag.
	* manual/stdio.texi: Add %MENU% tag.
	* manual/string.texi: Add %MENU% tag.
	* manual/sysinfo.texi: Add %MENU% tag.
	* manual/terminal.texi: Add %MENU% tag.
	* manual/time.texi: Add %MENU% tag.
	* manual/users.texi: Add %MENU% tag.

1998-07-13  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (x86_cap_flags):
	Update.

1998-07-11  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* sysdeps/unix/sysv/linux/recvmsg.c (__libc_recvmsg): Use ANSI
	style declaration to avoid warning.
	* sysdeps/unix/sysv/linux/sendmsg.c (__libc_sendmsg): Likewise.

1998-07-04  Mark Kettenis  <kettenis@phys.uva.nl>

	* elf/rtld.c (process_dl_debug): Add missing continue.

1998-07-12  Mark Kettenis  <kettenis@phys.uva.nl>

	* elf/rtld.c (_dl_skip_args): Make global because the Hurd startup
	code needs it.

1998-07-10  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* Makeconfig ($(common-objpfx)sysd-dirs): Write out definition of
	sysd-dirs-done.
	* Makerules: Don't generate version maps too early.
	($(common-objpfx)sysd-versions): Force regeneration if the list of
	subdirs has changed.

1998-07-10  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* elf/dlfcn.h (DL_CALL_FCT): Use portable comma expression.

1998-07-11  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* iconv/gconv_db.c (gen_steps): Always set *handle and *nsteps.
	* iconv/gconv_dl.c (__gconv_find_shlib): Correct use of tfind
	return value.

1998-07-12  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* elf/dl-open.c (dl_open_worker): New function.
	(_dl_open): Call it to do the actual work while catching errors.
	* elf/dl-close.c (_dl_close): Only call termination function if
	the initialisation function was called.

1998-07-13  Ulrich Drepper  <drepper@cygnus.com>

	* libio/libioP.h (_IO_cleanup_registration_needed): Use __PMT.
	Reported by Felix von Leitner <leitner@amdiv.de>.

1998-07-13 10:28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
	* elf/rtld.c (process_dl_debug): Add missing continue.

1998-06-23  Mark Kettenis  <kettenis@phys.uva.nl>
1998-07-13 12:29:13 +00:00
Ulrich Drepper
f65fd747b4 update from main archive 961207
Sun Dec  8 06:56:49 1996  Ulrich Drepper  <drepper@cygnus.com>

	* io/getwd.c: Use PATH_MAX not LOCAL_PATH_MAX.  Fix typo in
	comment.
	* stdlib/canonicalize.c: Correct bugs in last change.
	Patch by HJ Lu.

	* libio/Makefile (routines): Remove ioprims.
	(aux): Remove cleanup.
	Add IO_DEBUG option for .o files.
	* libio/cleanups.c: Removed.
	* libio/ioprims.c: Removed.
	* libio/filedoalloc.c: More updates from libg++-2.8b5.
	* libio/fileops.c: Likewise.
	* libio/genops.c: Likewise.
	* libio/iolibio.h: Likewise.
	* libio/iopopen.c: Likewise.
	* libio/iovsprintf.c: Likewise.
	* libio/iovsscanf.c: Likewise.
	* libio/libio.h: Likewise.
	* libio/libioP.h: Likewise.
	* libio/memstream.c: Likewise.
	* libio/strfile.h: Likewise.
	* libio/vasprintf.c: Likewise.
	* libio/vsnprintf.c: Likewise.

	* libio/stdio.h: Define P_tmpdir only is __USE_SVID.

	* manual/arith.texi: Change references to ANSI C to ISO C.
	* manual/conf.texi: Likewise.
	* manual/creature.texi: Likewise.
	* manual/ctype.texi: Likewise.
	* manual/errno.texi: Likewise.
	* manual/filesys.texi: Likewise.
	* manual/intro.texi. Likewise.
	* manual/io.texi: Likewise.
	* manual/lang.texi: Likewise.
	* manual/libc.texinfo: Likewise.
	* manual/locale.texi: Likewise.
	* manual/maint.texi: Likewise.
	* manual/mbyte.texi: Likewise.
	* manual/memory.texi: Likewise.
	* manual/process.texi: Likewise.
	* manual/process.texi: Likewise.
	* manual/search.texi: Likewise.
	* manual/setjmp.texi: Likewise.
	* manual/signal.texi: Likewise.
	* manual/startup.texi: Likewise.
	* manual/stdio.texi: Likewise.
	* manual/string.texi: Likewise.
	* manual/time.texi: Likewise.

	* manual/locale.texi: Remove description of LC_RESPONSE and add
	LC_MESSAGES.

	* Makefile (subdirs): Change malloc in $(malloc).
	* config.make.in: Add variable malloc which is initialized from
	@malloc@.
	* configure.in: Add new option --enable-new-malloc to use new
	malloc.  This is the default on Linux.
	* sysdeps/unix/sysv/linux/configure.in: Define malloc to new-malloc
	by default.
	* new-malloc/Makefile: New file.  Improved malloc implementation.
	* new-malloc/malloc.c: Likewise.
	* new-malloc/malloc.h: Likewise.
	* new-malloc/mallocbug.c: Likewise.
	* new-malloc/obstack.c: Likewise.
	* new-malloc/obstack.h: Likewise.
	* new-malloc/thread-m.h: Likewise.
	* time/Makefile: Compile ap.c with NO_MCHECK flag for now.
	* time/ap.c: Don't call mcheck if NO_MCHECK is defined.

	* resolv/Makefile: Add rule to rebuiild libresolv.so when libc.so
	changed.

	* stdio/feof.c: Update copyright.
	* stdio/stdio.h: Add field for lock to FILE structure.
	Add cast to *MAGIC constants to prevent warnings.

	* stdio-common/bug7.c: Correct test.  Stream must not be closed
	twice.

	* stdlib/Makefile (routines): Add secure-getenv.
	* stdlib/secure-getenv.c: New file.  __secure_getenv function
	moved to here from sysdeps/generic/getenv.c.  Otherwise an
	application cannot replace the getenv function in the libc.
	* sysdeps/generic/getenv.c: Remove __secure_getenv function.
	* sysdeps/stub/getenv.c: Remove __secure_getenv alias.

	* sysdeps/mach/libc-lock.h: Define__libc_mutex_lock to __mutex_lock.

	* sysdeps/posix/fdopen.c: Update copyright.  Don't use EXFUN.

	* time/test-tz.c: Comment fifth test out.  PROBLEM.

	* time/tzset.c: De-ANSI-declfy.
	(__tzset): Don't increment pointer tz when no DST information is
	given.

Sat Dec  7 23:47:54 1996  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/mach/libc-lock.h [_LIBC]: Add definition of
	__libc_mutex_lock.
	Patch by Thomas Bushnell.

	* sysdeps/unix/sysv/linux/timebits.h: Load <asm/param.h> only
	if __USE_MISC.

	* sysdeps/unix/sysv/linux/Dist: Add llseek.c.

Sat Dec  7 12:18:56 1996  Ulrich Drepper  <drepper@cygnus.com>

	* time/strftime (%c format): Remove %Z from default string.
	Reported by Paul Eggert

	* io/getwd.c: Don't apply getcwd on user supplied buffer.
1996-12-08 08:01:13 +00:00
Roland McGrath
28f540f45b initial import 1995-02-18 01:27:10 +00:00