We turn off this feature to avoid polluting our shared libary with
a specific value. However, static libgcc is not under our control,
and has enabled this for ibm128 routines. This pollutes the
resulting shared libraries with it.
Attach a post-linking hook to replace this section with one crafted
as hard-float + indeterminate ldbl. This allows IEEE ldbl users to
avoid having to disable the gnu attributes feature which should
protect them from linking ibm ldbl libraries using the gnu attributes
feature.
Currently, this only replaces libc and libm which support both ldbl
formats and rely on application code to explicitly determine which
is to be used.
Strictly speaking, the section could be deleted with minimal lost value.
However correctly set attributes could prove useful for some future change,
and similarly missing attributes.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
-mabi=ieeelongdouble triggers the stdc++ libraries _Float128
support, which then breaks if algorithm is included. For now,
explicitly disable _Float128 for such tests.
I have opened up GCC BZ 94080 to track this.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
I have observed a bug on 7.4.0 whereby __mulkc3 calls are
swapped with __multc3 depending on ABI selection. For the
sake of being overly cautious, build all _Float128 files
with ibm128 to workaround these compilers. This has been
noted in GCC BZ 84914, and will not be fixed for GCC 7.
Likewise, non-math files built with _Float128 are assumed
to have ibm long double. Explicilty preserve this
assumption.
Finally, add some bootstrapping code to avoid applying
these options until IEEE long double is enabled as they
require GCC 7 and above.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Adds a POWER9 version of fmaf128 that uses the xsmaddqp
instruction.
Co-authored-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some of these files depend on the avoidance of using the various
register sets of POWER. When enabling the IEEE 128 long double,
we must be sure to disable this ABI as some compilers will
refuse to compile if -mno-vsx and -mabi=ieeelongdouble are both
present.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
In practice, this flag should be applied globally, but it makes a good
sanity check to ensure ibm128 and ieee128 long double files are not
getting mismatched. _Float128 files use no long double, thus are
always safe to use this option.
Similarly, when investigating the linker complaints, difftime
makes trivial, self contained, usage of long double, so thus it
is also explicitly marked as such.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This better resembles the default linking process with the gnulibs,
and also resolves the increasingly difficult to maintain
f128-loader-link usage on powerpc64le as some libgcc symbols are
dependent on those found in the loader (ld).
Ensure the correct ldouble abi flags are applied to ibm128 files and
nldbl files. Remove the IEEE options if used, and apply the flags
used to build ldouble files which are ibm128 abi.
nldbl tests are a little tricky. To use the support, we must remove
all ldouble abi flags, and ensure -mlong-double-64 is used.
Co-authored-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Co-authored-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Co-authored-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
With mathinline removal there is no need to keep building and testing
inline math tests.
The gen-libm-tests.py support to generate ULP_I_* is removed and all
libm-test-ulps files are updated to longer have the
i{float,double,ldouble} entries. The support for no-test-inline is
also removed from both gen-auto-libm-tests and the
auto-libm-test-out-* were regenerated.
Checked on x86_64-linux-gnu and i686-linux-gnu.
When unwinding through a signal frame the backtrace function on PowerPC
didn't check array bounds when storing the frame address. Fixes commit
d400dcac5e ("PowerPC: fix backtrace to handle signal trampolines").
GCC 10.0 enabled -fno-common by default and this started to point that
__cache_line_size had been implemented in 2 different places: loader and
libc.
In order to avoid this duplication, the libc variable has been removed
and the loader variable is moved to rtld_global_ro.
File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order
to reuse code for both static and dynamic linking scenarios.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Passes buildmanyglibc.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
Linux vDSO initialization code the internal function pointers require a
lot of duplicated boilerplate over different architectures. This patch
aims to simplify not only the code but the required definition to enable
a vDSO symbol.
The changes are:
1. Consolidate all init-first.c on only one implementation and enable
the symbol based on HAVE_*_VSYSCALL existence.
2. Set the HAVE_*_VSYSCALL to the architecture expected names string.
3. Add a new internal implementation, get_vdso_mangle_symbol, which
returns a mangled function pointer.
Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time
are handled in an arch-independent way, powerpc still uses some
arch-specific vDSO symbol handled in a specific init-first implementation.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu,
mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
sparc64-linux-gnu, and x86_64-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address,
is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/arm/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/mips/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/i386/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported
name.
* sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ,
HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to
invalid names if architecture does not define them.
(get_vdso_mangle_symbol): New symbol.
* sysdeps/unix/sysv/linux/init-first.c: New file.
* sysdeps/unix/sysv/linux/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday,
clock_gettime, clock_getres, getcpu, time): Remove declaration.
(__libc_vdso_platform_setup_arch): Likewise and use
get_vdso_mangle_symbol to setup vDSO symbols.
(sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add
attribute_hidden.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove
definition.
Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had
pre power8 compatible binutils hardcoded macros and were not using
.machine power8.
This patch should not have semantic changes, in fact it should have the
same exact code generated.
Tested that generated stripped shared objects are identical when
using "strip --remove-section=.note.gnu.build-id".
Checked on:
- powerpc64le, power9, build-many-glibcs.py, gcc 6.4.1 20180104, binutils 2.26.2.20160726
- powerpc64le, power8, debian 9, gcc 6.3.0 20170516, binutils 2.28
- powerpc64le, power9, ubuntu 19.04, gcc 8.3.0, binutils 2.32
- powerpc64le, power9, opensuse tumbleweed, gcc 9.1.1 20190527, binutils 2.32
- powerpc64, power9, debian 10, gcc 8.3.0, binutils 2.31.1
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The power7 logb implementation does not show a performance gain on
ISA 2.07+ chips with faster floating-point to GRP instructions
(currently POWER8 and POWER9).
This patch moves the POWER7 implementation to generic one and enables
it for POWER7. It also add some cleanup to use inline floating-point
number instead of define them using static const.
The performance difference is for POWER9:
- Without patch:
"logb": {
"subnormal": {
"duration": 4.99202e+09,
"iterations": 8.83662e+08,
"max": 75.194,
"min": 5.501,
"mean": 5.64925
},
"normal": {
"duration": 4.97063e+09,
"iterations": 9.97094e+08,
"max": 46.489,
"min": 4.956,
"mean": 4.98512
}
}
- With patch:
"logb": {
"subnormal": {
"duration": 4.97226e+09,
"iterations": 9.92036e+08,
"max": 77.209,
"min": 4.892,
"mean": 5.01218
},
"normal": {
"duration": 4.96192e+09,
"iterations": 1.07545e+09,
"max": 12.361,
"min": 4.593,
"mean": 4.61382
}
}
The ifunc implementation is also enabled only for powerpc64.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power7/fpu/s_logb.c: Move to ...
* sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ...
* sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ...
* sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_log* objects.
(CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c,
CFLAGS-s_logb-power7.c): New fule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
This patches consolidates all the powerpc llrint{f} implementations on
the generic sysdeps/powerpc/fpu/s_llrint{f}.
The IFUNC support is also moved only to powerpc64 only, since for
powerpc64le generic implementation resulting in optimized code.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrint-power8, s_llrint-power6x, and
s_llrint-ppc64.
(CFLAGS-s_llrint-power8.c, CFLAGS-s_llrint-power6x.c): New rule.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power6x.c: New
file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power8.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_lrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrintf.c: ... here.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/Makefile: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_llrint-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power6x.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power8.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The powerpc finite optimization do not show much gain:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power7 uses ftdiv to optimize for some input patterns, but at
cost of others. Comparing against generic C implementation built
for powerpc64-linux-gnu-power7 (--with-cpu=power7):
- Generic sysdeps/ieee754 implementation:
"isfinite": {
"": {
"duration": 5.0082e+09,
"iterations": 2.45299e+09,
"max": 43.824,
"min": 2.008,
"mean": 2.04167
},
"INF": {
"duration": 4.66554e+09,
"iterations": 2.28288e+09,
"max": 35.73,
"min": 2.008,
"mean": 2.04371
},
"NAN": {
"duration": 4.66274e+09,
"iterations": 2.28716e+09,
"max": 34.161,
"min": 2.009,
"mean": 2.03866
}
}
- power7 optimized one:
"isfinite": {
"": {
"duration": 4.99111e+09,
"iterations": 2.65566e+09,
"max": 25.015,
"min": 1.716,
"mean": 1.87942
},
"INF": {
"duration": 4.6783e+09,
"iterations": 2.0999e+09,
"max": 35.264,
"min": 1.868,
"mean": 2.22787
},
"NAN": {
"duration": 4.67915e+09,
"iterations": 2.08678e+09,
"max": 38.099,
"min": 1.869,
"mean": 2.24228
}
}
So it basically optimizes marginally for normal numbers while
increasing the latency for other kind of FP.
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_finite*
objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-power7.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call):
Remove s_finite* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power7.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finitef.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The powerpc isinf optimizations onyl adds complexity:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power7 uses ftdiv to optimize for some input pattern and branch
implementation for INF and denormal that does:
return (ix & UINT64_C (0x7fffffffffffffff)) == UINT64_C (0x7ff0000000000000)
Although it does show slight better latency than generic algorithm
(as below), it is only for power7 and requires it to override it
for power8.
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_isinf* and s_isinf*
objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-power7.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isinff.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call):
Remove s_isinf* and s_isinf* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isinff.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isinff.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The powerpc isnan optimizations are not really a gain:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power5, power6, and power6x are just micro-optimization to
improve the Load-Hit-Store hazards from floating-point to general
register transfer, and current GCC already has support to minimize
it by inserting either extra nops or group dispatch instructions.
- The power7 uses ftdiv to optimize for some input patterns, but at
cost of others. Comparing against generic C implementation built
for powerpc-linux-gnu-power4 (which uses the hp-timing support on
benchtests):
- Generic sysdeps/ieee754 implementation:
"isnan": {
"": {
"duration": 4.98415e+09,
"iterations": 2.34516e+09,
"max": 45.925,
"min": 2.052,
"mean": 2.12529
},
"INF": {
"duration": 4.74057e+09,
"iterations": 1.69761e+09,
"max": 91.01,
"min": 2.052,
"mean": 2.79249
},
"NAN": {
"duration": 4.74071e+09,
"iterations": 1.68768e+09,
"max": 282.343,
"min": 2.052,
"mean": 2.809
}
}
- power7 optimized one:
$ ./testrun.sh benchtests/bench-isnan
"isnan": {
"": {
"duration": 4.96842e+09,
"iterations": 2.56297e+09,
"max": 50.048,
"min": 1.872,
"mean": 1.93854
},
"INF": {
"duration": 4.76648e+09,
"iterations": 1.54213e+09,
"max": 373.408,
"min": 2.661,
"mean": 3.09084
},
"NAN": {
"duration": 4.76845e+09,
"iterations": 1.54515e+09,
"max": 51.016,
"min": 2.736,
"mean": 3.08607
}
}
So it basically optimizes marginally for normal numbers while
increasing the latency for other kind of FP.
- The generic implementation requires getting the floating point
status, disable the invalid operation bit, and restore the
floating-point status. Each operation is costly and requires
flushing the FP pipeline.
Using the same scenarion for the previous analysis:
"isnan": {
"": {
"duration": 5.08284e+09,
"iterations": 6.2898e+08,
"max": 41.844,
"min": 8.057,
"mean": 8.08108
},
"INF": {
"duration": 4.97904e+09,
"iterations": 6.16176e+08,
"max": 39.661,
"min": 8.057,
"mean": 8.08055
},
"NAN": {
"duration": 4.98695e+09,
"iterations": 5.95866e+08,
"max": 29.728,
"min": 8.345,
"mean": 8.36925
}
}
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_isnan.c: Remove file.
* sysdeps/powerpc/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_isnan-* and
s_isnanf-* objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power5.S:
Remove file
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power7.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power5.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_calls):
Remove s_isnan-* and s_isnanf-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power5.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6x.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isnanf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
GCC always expand copysign{f} for all possible cpus, so calling the libm
is only done if user explicitly states to disable the builtin (which is
done usually not for performance reason). So to provide ifunc variant
for copysign is just unrequired complexity, since libm will be called
on non-performance critical code.
This patch removes both powerpc32 and powerpc64 ifunc variants and
consolidates the powerpc implementation on
sysdeps/powerpc/fpu/s_copysign{f}.c using compiler builtins.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_copysign.c: New file.
* sysdeps/powerpc/fpu/s_copysignf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdep_routines, libm-sysdep_routines): Remove s_copysign-power6 and
s_copysign-ppc32.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-power6.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdeps_calls):
Remove s_copysign-power6 s_copysign-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-power6.S:
Remove file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysignf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
This patches consolidates all the powerpc rint{f} implementations on
the generic sysdeps/powerpc/fpu/s_rint{f}.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode,
round_to_integer_float, round_mode): Add RINT handling.
(reset_fenv_mode): New symbol.
* sysdeps/powerpc/fpu/s_rint.c (__rint): Use generic implementation.
* sysdeps/powerpc/fpu/s_rintf.c (__rintf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Since GCC commit 271500 (svn), also known as the following commit on the
git mirror:
commit 61edec870f9fdfb5df3fa4e40f28cbaede28a5b1
Author: amodra <amodra@138bc75d-0d04-0410-961f-82ee72b054a4>
Date: Wed May 22 04:34:26 2019 +0000
[RS6000] Don't pass -many to the assembler
glibc builds are failing when an assembly implementation does not
declare the correct '.machine' directive, or when no such directive is
declared at all. For example, when a POWER6 instruction is used, but
'.machine power6' is not declared, the assembler will fail with an error
similar to the following:
../sysdeps/powerpc/powerpc64/power8/strcmp.S: Assembler messages:
24 ../sysdeps/powerpc/powerpc64/power8/strcmp.S:55: Error: unrecognized opcode: `cmpb'
This patch adds '.machine powerN' directives where none existed, as well
as it updates '.machine power7' directives on POWER8 files, because the
minimum binutils version required to build glibc (binutils 2.25) now
provides this machine version. It also adds '-many' to the assembler
command used to build tst-set_ppr.c.
Tested for powerpc, powerpc64, and powerpc64le, as well as with
build-many-glibcs.py for powerpc targets.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This patches consolidates all the powerpc trunc{f} implementations on
the generic sysdeps/powerpc/fpu/s_trunc{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/trunc_to_integer.h (set_fenv_mode): Add
TRUNC handling.
(round_mode): Add definition for TRUNC.
* sysdeps/powerpc/fpu/s_trunc.c: New file.
* sysdeps/powerpc/fpu/s_truncf.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.c: New
file.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.c:
Likewise.
* sysdep/powerpc/powerpc32/power5+/fpu/s_trunc.S: Remove file.
* sysdep/powerpc/powerpc32/power5+/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_trunc-power5+, s_trunc-ppc64,
s_truncf-power5+, and s_truncf-ppc64.
(CFLAGS-s_trunc-power5+.c, CFLAGS-s_truncf-power5+.c): New rule.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_trunc.c: ... here.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_truncf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_trunc-power5+, s_trunc-ppc64,
s_truncf-power5+, and s_truncf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-power5+.S: Remove
file.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-ppc64.S: Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-power5+.S:
Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_trunc.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_truncf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
This patches consolidates all the powerpc round{f} implementations on
the generic sysdeps/powerpc/fpu/s_round{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode): Add
ROUND handling.
(round_mode): Add definition for ROUND.
(round_to_integer_float): Likewise.
* sysdeps/powerpc/fpu/s_round.c: New file.
* sysdeps/powerpc/fpu/s_roundf.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-power5+.c: New
file.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-ppc32.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-power5+.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-ppc32.c:
Likewise.
* sysdep/powerpc/powerpc32/power5+/fpu/s_round.S: Remove file.
* sysdep/powerpc/powerpc32/power5+/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_round-power5+, s_round-ppc64,
s_roundf-power5+, and s_roundf-ppc64.
(CFLAGS-s_round-power5+.c, CFLAGS-s_roundf-power5+.c): New rule.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_round-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_round-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_round.c: ... here.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_roundf-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_roundf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_roundf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_round-power5+, s_round-ppc64,
s_roundf-power5+, and s_roundf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_round-power5+.S: Remove
file.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_round-ppc64.S: Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_roundf-power5+.S:
Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_roundf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_round.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_roundf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
This patches consolidates all the powerpc floor{f} implementations on
the generic sysdeps/powerpc/fpu/s_floor{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode):
Add FLOOR option.
(round_mode): Add definition for FLOOR.
* sysdeps/powerpc/fpu/s_floor.c: New file.
* sysdeps/powerpc/fpu/s_floorf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-power5+.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-ppc32.S:
Likewise
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-power5+.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: Remove file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Remove file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_floor-power5+, s_floor-ppc64,
s_floorf-power5+, and s_floorf-ppc64.
(CFLAGS-s_floor-power5+.c, CFLAGS-s_floorf-power5+.c): New rule.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floor-power5+.c: New
file.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floor-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_floor.c: ... here.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floorf-power5+.c: New
file.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floorf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_floorf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_floor-power5+, s_floor-ppc64,
s_floorf-power5+, and s_floorf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_floor-power5+.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor-ppc64.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
This patches consolidates all the powerpc ceil{f} implementations on
the generic sysdeps/powerpc/fpu/s_ceil{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the frip
instruction) or a generic implementation which uses FP only operations.
It adds a generic implementation (round_to_integer.h) which is shared
with other rounding to integer routines. The resulting code should be
similar in term os performance to previous assembly one.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround_inline_nocheck): New
function.
* sysdeps/powerpc/fpu/round_to_integer.h: New file.
* sysdeps/powerpc/fpu/s_ceil.c: Likewise.
* sysdeps/powerpc/fpu/s_ceilf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_ceil-power5+.c, CFLAGS-s_ceilf-power5+.c): New rule.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-power5+.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-power5+.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: Remove file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile: New file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceil.c: ... here.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf-power5+.c: New
file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_ceilf.c: ...
* here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_ceil-power5+, s_ceil-ppc64,
s_ceilf-power5+, and s_ceilf-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil-power5+.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf-power5+.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
Replace inline asm uses of the "mffs" and "mtfsf" instructions with
the analogous GCC builtins.
__builtin_mffs and __builtin_mtfsf are both available in GCC 5 and above.
Given the minimum GCC level for GLibC is now GCC 6.2, it is safe to use
these builtins without restriction.
2019-03-29 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_register): Replace inline
asm with builtin.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (FP_INIT_ROUNDMODE):
Likewise.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (_GET_DI_FPSCR): Likewise.
(_GET_SI_FPSCR): Likewise.
(_SET_SI_FPSCR): Likewise.
This patch refactor how hp-timing is used on loader code for statistics
report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
HP_TIMING_INLINE.
* nptl/descr.h: Likewise.
* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
Abstract hp-timing usage with RTLD_* macros.
* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
HP_TIMING_NONAVAIL): Likewise.
* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/generic/hp-timing-common.h: Update comment with
HP_TIMING_AVAIL removal.
This patch fixes further coding style issues where code should have
broken lines before operators in accordance with the GNU Coding
Standards but instead was breaking lines after them.
Tested for x86_64, and with build-many-glibcs.py.
* stdio-common/vfscanf-internal.c (ARG): Break lines before rather
than after operators.
* sysdeps/mach/hurd/setitimer.c (timer_thread): Likewise.
(setitimer_locked): Likewise.
* sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/pagecopy.h (PAGE_COPY_FWD): Likewise.
* sysdeps/mach/thread_state.h (machine_get_basic_state): Likewise.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c
(PPC_CPU_SUPPORTED): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (N_TXTOFF): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/overflow.h
(stat_overflow): Likewise.
(statfs_overflow): Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c (do_test): Likewise.
* sysdeps/unix/sysv/linux/tst-ttyname.c (eq_ttyname): Likewise.
(eq_ttyname_r): Likewise.
(run_chroot_tests): Likewise.
Since the commit
commit 81a1443941
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Tue Feb 5 17:35:12 2019 -0200
wcsmbs: optimize wcscat
powerpc64 and powerpc64le builds fail when configured with
--disable-multi-arch and --with-cpu=power6 (or newer), due to an
undefined reference to __GI___wcscpy. This patch fixes this on
sysdeps/powerpc/powerpc64/power6/wcscpy.c, which is only used when
multi-arch is disabled.
This patch does nothing for the failures on 32-bits powerpc builds,
because the file is under the powerpc64 subdirectory, however, powerpc
builds were already failing with --disable-multi-arch, with multiple
error messages, even before the aforementioned commit.
Tested for powerpc, powerpc64, and powerpc64le with multi-arch enabled
(all pass) and disabled (powerpc still fails as explained above).
This patch fixes more places where a space should have been present
before '(' in accordance with the GNU Coding Standards (as with the
previous patch, mainly for calls to sizeof).
Tested with build-many-glibcs.py.
* sysdeps/powerpc/powerpc32/dl-machine.c
(__elf_machine_fixup_plt): Use space before '('.
(__process_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (TI_BITS):
Likewise.
* sysdeps/powerpc/powerpc64/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/test-arith.c (union_t): Likewise.
(pattern): Likewise.
(delta): Likewise.
(check_result): Likewise.
(check_excepts): Likewise.
(check_op): Likewise.
(fail_xr): Likewise.
* sysdeps/unix/alpha/sysdep.h (syscall_promote): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (AOUTHSZ): Likewise.
(SCNHSZ): Likewise.
* sysdeps/unix/sysv/linux/hppa/makecontext.c (FRAME_SIZE_BYTES):
Likewise.
(ARGS): Likewise.
(__makecontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t):
Likewise.
This patch rewrites wcscat using wcslen and wcscpy. This is similar to
the optimization done on strcat by 6e46de42fe.
The strcpy changes are mainly to add the internal alias to avoid PLT
calls.
Checked on x86_64-linux-gnu and a build against the affected
architectures.
* include/wchar.h (__wcscpy): New prototype.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c
(__wcscpy): Route internal symbol to generic implementation.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c (wcscpy):
Add internal __wcscpy alias.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy.c (wcscpy): Likewise.
* sysdeps/s390/wcscpy.c (wcscpy): Likewise.
* sysdeps/x86_64/multiarch/wcscpy.c (wcscpy): Likewise.
* wcsmbs/wcscpy.c (wcscpy): Add
* sysdeps/x86_64/multiarch/wcscpy-c.c (WCSCPY): Adjust macro to
use generic implementation.
* wcsmbs/wcscat.c (wcscat): Rewrite using wcslen and wcscpy.
This patch fixes -Wimplicit-fallthrough warnings in system-specific
code that show up building glibc with -Wextra, by adding fall-through
comments, or moving existing such comments to the place required for
them to work (immediately before the case label being fallen through).
Tested with build-many-glibcs.py.
* sysdeps/i386/dl-machine.h (elf_machine_rela): Add fall-through
comments.
* sysdeps/m68k/m680x0/fpu/s_cexp_template.c (s(__cexp)): Likewise.
* sysdeps/m68k/memcopy.h (WORD_COPY_FWD): Likewise.
(WORD_COPY_BWD): Likewise.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/iso-8859-1_cp037_z900.c (TR_LOOP): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_reloc): Move fall-through
comment.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
The configure fragment for powerpc64le contains a test for the presence
of several compiler builtins and of the __float128 type, which are
provided by GCC 6.2 for powerpc64le. Since this configure test was
added, the compiler version required to build glibc for powerpc64le was
different than that required for the other architectures.
Now that glibc requires GCC 6.2 globally (since commit ID 4dcbbc3b28),
this patch removes the powerpc64le-specific test.
Even tough the configure test checks for compiler features rather than
compiler version, the intent of the test was to stop build attempts at
early stages, if they had been configured with a too old compiler. It
was not the intention of the test to detect compiler breakage (such as
the removal of the required compiler features in future GCC versions),
and glibc is not the place to test for compiler regressions, anyway.
Tested for powerpc64le with GCC 6.2 (built with build-many-glibcs.py).
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
A single underscore was omitted in
sysdeps/powerpc/powerpc64/multiarch/strncmp.c, resulting in use of
power8 version of strncmp instead of power9 version, with significant
performance degradation.
* sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Fix #ifdef.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
