Some types of relocations technically need to be signed rather than
unsigned: in particular ones that are used with moveli or movei,
or for jump and branch. This is almost never a problem. Jump and
branch opcodes are pretty much uniformly resolved by the static linker
(unless you omit -fpic for a shared library, which is not recommended).
The moveli and movei opcodes that need to be sign-extended generally
are for positive displacements, like the construction of the address of
main() from _start(). However, tst-pie1 ends up with main below _start
(in a different module) and the test failed due to signedness issues in
relocation handling.
This commit treats the value as signed when shifting (to preserve the
high bit) and also sign-extends the value generated from the updated
bundle when comparing with the desired bundle, which we do to make sure
no overflow occurred. As a result, the tst-pie1 test now passes.
TLS_INIT_TP in sysdeps/i386/nptl/tls.h uses some hand written asm to
generate a set_thread_area that might result in exchanging ebx and esp
around the syscall causing introspection tools like valgrind to loose
track of the user stack. Just use INTERNAL_SYSCALL which makes sure
esp isn't changed arbitrarily.
Before the patch the code would generate:
mov $0xf3,%eax
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %esp,%ebx
int $0x80
xchg %esp,%ebx
Using INTERNAL_SYSCALL instead will generate:
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %ecx,%ebx
mov $0xf3,%eax
int $0x80
xchg %ecx,%ebx
Thanks to Florian Weimer for analysing why the original code generated
the bogus esp usage:
_segdescr.desc happens to be at the top of the stack, so its address
is in %esp. The asm statement says that %3 is an input, so its value
will not change, and GCC can use %esp as the input register for the
expression &_segdescr.desc. But the constraints do not fully describe
the asm statement because the %3 register is actually modified, albeit
only temporarily.
[BZ #17319]
* sysdeps/i386/nptl/tls.h (TLS_INIT_TP): Use INTERNAL_SYSCALL
to call set_thread_area instead of hand written asm.
(__NR_set_thread_area): Removed define.
(TLS_FLAG_WRITABLE): Likewise.
(__ASSUME_SET_THREAD_AREA): Remove check.
(TLS_EBX_ARG): Remove define.
(TLS_LOAD_EBX): Likewise.
In my powerpc32 testing I've observed misc/test-gettimebasefreq
failing.
This is a glibc build (soft-float, though that's not relevant here)
without any --with-cpu and without any special configuration of the
default CPU for GCC either. In particular, it's one not using
sysdeps/powerpc/powerpc32/power4/hp-timing.h (although in fact the
processor I'm using for testing is POWER4-based), so hp_timing_t is
32-bit not 64-bit. But the VDSO call being used by
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is generating a 64-bit result
(high part in r3, low part in r4). The code extracting that result,
however, expects a result of the type hp_timing_t as passed to
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, meaning that only r3 (= 0) is
used and the value in r4 is ignored. This patch fixes this by always
using uint64_t as the type in INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK -
reflecting the actual ABI (unconditional in the kernel) of that VDSO
call. This is the minimal change for this issue - no check for
overflow, no change of the type of the timebase_freq variable or the
return type of __get_clockfreq to something other than hp_timing_t
(such a change would simply move the implicit conversions to the over
callers of that function), no change to hp_timing_t itself.
Tested for powerpc32 soft float.
[BZ #17263]
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Include
<stdint.h>.
(__get_clockfreq): Use uint64_t instead of hp_timing_t in
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK call.
Since:
commit 409e00bd69
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jan 29 07:51:41 2014 -0800
Disable x87 inline functions for SSE2 math
When i386 and x86-64 mathinline.h was merged into a single mathinline.h,
"gcc -m32" enables x87 inline functions on x86-64 even when -mfpmath=sse
and SSE2 is enabled. It is a regression on x86-64. We should check
__SSE2_MATH__ instead of __x86_64__ when disabling x87 inline functions.
gcc-3.2 is unable to correctly compile x86_64 routines for llrint
since it gets redefined. This is because gcc 3.2 does not set
__SSE2_MATH__ for x86_64, thus exposing the duplicate definition.
The correct fix ought to be to check for both __SSE2_MATH__ and
__x86_64__ and enable those bits only when neither are defined.
Tested fix with the reproducer for
409e00bd69 as well as with gcc-3.2.
The compiler doesn't know that the cpuid asm statement in intel_check_word
will trash RBX. We are lucky that it doesn't cause any problems since
RBX is also used by compiler for other purposes so that RBX is saved and
restored. This patch replaces it with __cpuid_count.
[BZ #17259]
* sysdeps/x86_64/cacheinfo.c (intel_check_word): Replace cpuid
asm statement with __cpuid_count.
On powerpc, floating-point environment macros are defined as pointers
to constants in the library that contain the bit-patterns of the
desired environment, instead of being magic constants cast to pointer
type.
For soft-float, the bit-patterns used for fenv_t are not laid out the
same as for hard-float. (e500 has a third layout used; that's not an
ABI issue because these values are only meaningful within a single
process, all of whose glibc libraries must come from the same build of
glibc.) While the __fe_dfl_env value for soft-float was appropriate
for the soft-float fenv_t representation, the other two constants had
the same bit-patterns as for hard-float. Those bit patterns had the
effect of having exceptions already raised, causing
math/test-fenv-return to fail; this patch fixes the patterns used.
(__fe_nonieee_env also had exceptions unmasked, though they should be
masked to match hard-float semantics. Since there is no separate
non-IEEE mode for soft-float, it's most appropriate for
__fe_nonieee_env to be the same as __fe_dfl_env; this patch makes it
an alias.)
Tested for powerpc-nofpu.
[BZ #17261]
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_enabled_env): Change
value to 0.
(__fe_nonieee_env): Define as an alias for __fe_dfl_env.
Open file description locks have been merged into the Linux kernel for
v3.15. Add the appropriate command-value definitions and an update to
the manual that describes their usage.
This is a change to the dynamic linker to add prelinker support for the
R_ARM_TLS_DESC relocation. Two cases can be considered here, the usual
one where lazy binding is in use and the less frequent one, where
immediate binding is requested via the use of the DF_BIND_NOW dynamic
flag (e.g. by using the GNU linker's "-z now" option).
This change only handles the first case. In this scenario the prelinker
does what the dynamic linker would do, that is it preinitialises
R_ARM_TLS_DESC relocations with a pointer to the lazy specialization as
provided with the DT_TLSDESC_PLT dynamic tag. A conflict is
additionally created and in the conflict resolution path the dynamic
linker complements the work by initialising the object's pointer as
indicated by the DT_TLSDESC_GOT dynamic tag to the linker's internal
lazy specialization worker function and also providing the associated
link map in the second entry of the GOT. This step is required, because
if prelinking is successful at the run time, then the dynamic linker's
elf_machine_runtime_setup() function isn't called that would normally do
so.
The second case remains unresolved, because support for that scenario
has not been implemented in the prelinker. In this case the lazy
specialization is unavailable and the DT_TLSDESC_PLT dynamic tag is not
present.
The prelinker could assume the common case of static specialization and
resolve the relocation, but that would require the exposure of dynamic
linker's specialization worker function. Furthermore the dynamic linker
would have to handle the relocation in the conflict resolution path and
see if the dynamic specialization should be used instead. This however
would require access to data structures currently not made available to
the conflict resolution path and therefore a redesign of this part of
the dynamic linker.
Alternatively the prelinker could defer all processing to the dynamic
linker's conflict resolution path, but that would require similar access
to the said data structures.
Therefore the prelinker issues an error instead and the dynamic linker
has assertions to check that DT_TLSDESC_PLT and DT_TLSDESC_GOT are in
use in its conflict resolution path.
This change resolves all TLS failures in the prelinker testsuite, as
noted in the bug report, as well as the small test case provided there.
Unfortunately we don't seem to have any hooks to factor in the prelinker
(if present on a system) to testing, so at this time this fix has to
rely on using the prelinker test suite and enabling TLS descriptors
there for coverage.
[BZ #17078]
* sysdeps/arm/dl-machine.h (elf_machine_rela)
[RESOLVE_CONFLICT_FIND_MAP]: Handle R_ARM_TLS_DESC relocation.
(elf_machine_lazy_rel): Handle prelinked R_ARM_TLS_DESC entries.
This patch fixes bug 17088, fallback fesetenv and feupdateenv not
giving an error for an FE_NOMASK_ENV argument when it requires traps
to be enabled. (This is the bug tested for by test-fenv-return.c.)
Tested mips64 soft-float.
[BZ #17088]
* math/fesetenv.c (__fesetenv)
[FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Return 1 for FE_NOMASK_ENV.
* math/feupdateenv.c (__feupdateenv)
[FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Likewise.
If a call to the set*id functions fails in a multi-threaded program,
the abort introduced in commit 13f7fe35ae
was triggered.
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
Here's an updated patch to fix the crash in bug-ga2 when the system
has no configured ipv6 address. I have taken a different approach of
using libc_freeres_fn instead of the libc_freeres_ptr since the former
gives better control over what is freed; we need that since cache may
or may not be allocated using malloc.
Verified that bug-ga2 works correctly in both cases and does not have
memory leaks in either of them.
This patch fixes bug 17097, ldbl-128 powl producing overflowing /
underflowing results with positive sign when the result should have
been negative. This was shown up by the tests in non-default rounding
modes added by my patch for bug 16315, but isn't actually limited to
non-default rounding modes: rather, when rounding to nearest the
wrappers produced a result with the correct sign and so always hid the
bug unless -lieee was used to disable the wrappers. The problem is
that in the cases where Y is large enough that the result overflows or
underflows for X not very close to 1, but not large enough to overflow
or underflow for all X != +/- 1 (in the latter case Y is always an
even integer), a positive overflowing / underflowing result is always
returned, rather than one with the correct sign. This patch moves the
relevant part of computation of the sign earlier and returns a result
of the correct sign.
Tested for mips64.
[BZ #17097]
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Return
result with correct sign in case of exponents that produce
overflow except for X very close to 1.
The nscd parent process returns the result of a `wait' call rather
than the exit status of the child it waits for. These two aren't
exactly the same. In my case (and probably on most machines), the exit
status is in the 2nd LSB of the result of `wait', and so:
e.g. if the nscd child process returns 1, the parent returns 1 << 8,
which Bash happily reports as 0.
This patch fixes bugs 16561 and 16562, bad results of yn in overflow
cases in non-default rounding modes, both because an intermediate
overflow in the recurrence does not get detected if the result is not
an infinity and because an overflowing result may occur in the wrong
sign. The fix is to set FE_TONEAREST mode internally for the parts of
the function where such overflows can occur (which includes the call
to y1 - where yn is used to compute a Bessel function of order -1,
negating the result of y1 isn't correct for overflowing results in
directed rounding modes) and then compute an overflowing value in the
original rounding mode if the to-nearest result was an infinity.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to test the ldbl-128 and ldbl-128ibm changes.
(The tests for these bugs were added in my previous y1 patch, so the
only thing this patch has to do with the testsuite is enable yn
testing in all rounding modes.)
[BZ #16561]
[BZ #16562]
* sysdeps/ieee754/dbl-64/e_jn.c: Include <float.h>.
(__ieee754_yn): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c: Include <float.h>.
(__ieee754_ynf): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-96/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/i386/fpu/fenv_private.h [!__SSE2_MATH__]
(libc_feholdsetround_ctx): New macro.
* math/libm-test.inc (yn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps : Likewise.
This patch updates README to remove a mention of the ports directory.
It also adds a NEWS item for the merge of ports into the main sysdeps
tree (I think it's NEWS-worthy, although not strictly a user-visible
feature).
Other remaining ports references to resolve: a comment in
manual/signal.texi (not giving a literal path, but maybe should change
anyway); a comment in config.h.in (path should be updated);
scripts/list-sources.sh (appears to date back to ports being a
separate repository).
* README: Do not mention ports directory.
This patch fixes bug 16539, spurious underflow exceptions from x86 /
x86-64 expm1l. The problem is that the computation of a base-2
exponent with extra precision involves spurious underflows for
arguments that are small but not subnormal, so a check is added to
just return the argument in those cases. (If the argument *is*
subnormal, underflowing is correct and the existing code will always
underflow, so it suffices to keep using the existing code in that
case; some expm1 implementations have a bug (bug 16353) with missing
underflow exceptions, but I don't think there's such a bug in this
particular version.)
Tested x86_64 and x86; no ulps updates needed.
(auto-libm-test-out diffs omitted below.)
[BZ #16539]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Just
return the argument for normal arguments with exponent below -64.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add another test of expm1.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16287, spurious underflows from ldbl-128 erfl
arising from it calling erfcl for arguments with absolute value at
least 1.0, although for large positive arguments erfcl correctly
underflows but erfl shouldn't. The fix is simply to avoid calling
erfcl, and just return 1, for arguments above a cut-off large enough
that erfl correctly rounds to-nearest as 1 but not so large that erfcl
underflows.
Tested mips64. Also tested x86_64 and x86 to confirm the new tests
(taken from the tests of erfc) don't cause any problems there; no ulps
updates needed.
[BZ #16287]
* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Return 1 without
calling __erfcl for arguments at least 16.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16354, spurious underflows from cosh when a tiny
argument is passed to expm1 and expm1 correctly underflows although
the final result of cosh should be 1. As noted in that bug, some
cases are latent because of expm1 implementations not raising
underflow (bug 16353), but all the implementations are fixed
similarly. They already contained checks for tiny arguments, but the
checks were too late to avoid underflow from expm1 (although they
would avoid underflow from subsequent squaring of the result of
expm1); they are moved before the expm1 calls.
The thresholds used for considering arguments tiny are not
particularly consistent in how they relate to the precision of the
floating-point format in question. They are, however, all sufficient
to ensure that the round-to-nearest result of cosh is indeed 1 below
the threshold (although sometimes they are smaller than necessary).
But the previous logic did not return 1, but the previously computed 1
+ expm1(abs(x)) value. And the thresholds in the ldbl-128 and
ldbl-128ibm code (0x1p-71L - I suspect 0x3f8b was intended in the code
instead of 0x3fb8 - and (roughly) 0x1p-55L) are not sufficient for
that value to be 1. So by moving the test for tiny arguments, and
consequently returning 1 directly now the expm1 value hasn't been
computed by that point, this patch also fixes bug 17061, the (large
number of ulps) inaccuracy for small arguments in those
implementations. Tests for that bug are duly added.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to validate the ldbl-128 and ldbl-128ibm changes.
[BZ #16354]
[BZ #17061]
* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Check for
small arguments before calling __expm1.
* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Check for
small arguments before calling __expm1f.
* sysdeps/ieee754/ldbl-128/e_coshl.c (__ieee754_coshl): Check for
small arguments before calling __expm1l.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c (__ieee754_coshl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
* math/auto-libm-test-in: Add more cosh tests. Do not allow
spurious underflow for some cosh tests.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This patch fixes bug 17050, missing errno setting for y1 overflow (for
small positive arguments). An appropriate check is added for overflow
directly in the __ieee754_y1 implementation, similar to the check
present for yn (doing it there rather than in the wrapper also avoids
yn needing to repeat the check when called for order 1 or -1 and it
uses __ieee754_y1).
Tested x86_64 and x86; no ulps update needed. Also tested for mips64
to verify the ldbl-128 fix (the ldbl-128ibm code just #includes the
ldbl-128 file).
[BZ #17050]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <errno.h>.
(__ieee754_y1): Set errno if return value overflows.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <errno.h>.
(__ieee754_y1f): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* math/auto-libm-test-in: Add more tests of y0, y1 and yn.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16315, bad pow handling of overflow/underflow in
non-default rounding modes. Tests of pow are duly converted to
ALL_RM_TEST to run all tests in all rounding modes.
There are two main issues here. First, various implementations
compute a negative result by negating a positive result, but this
yields inappropriate overflow / underflow values for directed
rounding, so either overflow / underflow results need recomputing in
the correct sign, or the relevant overflowing / underflowing operation
needs to be made to have a result of the correct sign. Second, the
dbl-64 implementation sets FE_TONEAREST internally; in the overflow /
underflow case, the result needs recomputing in the original rounding
mode.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16315]
* sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Likewise.
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/ieee754/dbl-64/e_pow.c: Include <math.h>.
(__ieee754_pow): Recompute overflowing and underflowing results in
original rounding mode.
* sysdeps/x86/fpu/powl_helper.c: Include <stdbool.h>.
(__powl_helper): Allow negative argument X and scale negated value
as needed. Avoid passing value outside [-1, 1] to f2xm1.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]:
Include <math.h>.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test): Use ALL_RM_TEST.
(pow_tonearest_test_data): Remove.
(pow_test_tonearest): Likewise.
(pow_towardzero_test_data): Likewise.
(pow_test_towardzero): Likewise.
(pow_downward_test_data): Likewise.
(pow_test_downward): Likewise.
(pow_upward_test_data): Likewise.
(pow_test_upward): Likewise.
(main): Don't call removed functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This fixes the calculation of R_ARM_TLS_DESC relocations for lazy global
symbol references, i.e. created with `-z lazy' in effect with the static
linker, where immediate resolution is requested with LD_BIND_NOW.
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
Implementation of strchr for AArch64. Speedups taken from micro-bench
show the improvements relative to the standard C code.
The use of LD1 means we have identical code for both big- and
little-endian systems.
This patch fixes __ieee754_logl (-LDBL_MAX) on x86_64 and x86 not to
subtract 1 from its argument and so cause spurious overflow in
FE_DOWNWARD mode. (For any argument strictly less than -1, it doesn't
matter whether or not 1 is subtracted before computing log1p, as long
as the result doesn't overflow to -Inf.)
Tested x86_64 and x86. (This particular case lacks test coverage,
since the testsuite doesn't cover -lieee, but it will be covered by
tests after the following patch to test pow in all rounding modes,
which was the context in which this bug was found.)
[BZ #17022]
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Do not subtract 1
from arguments -2 or below.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S (__ieee754_logl): Likewise.
This patch fixes few failures in nearbyintl() where the fraction part is
close to 0.5.i The new tests added report few extra failures in
nearbyint_downward and nearbyint_towardzero which is a known issue.
Fixes#17031.
