No 32-bit system call wrapper is added because the interface
is problematic because it cannot deal with 64-bit inode numbers
and 64-bit directory hashes.
A future commit will deprecate the undocumented getdirentries
and getdirentries64 functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Change the tcache->counts[] entries to uint16_t - this removes
the limit set by char and allows a larger tcache. Remove a few
redundant asserts.
bench-malloc-thread with 4 threads is ~15% faster on Cortex-A72.
Reviewed-by: DJ Delorie <dj@redhat.com>
* malloc/malloc.c (MAX_TCACHE_COUNT): Increase to UINT16_MAX.
(tcache_put): Remove redundant assert.
(tcache_get): Remove redundant asserts.
(__libc_malloc): Check tcache count is not zero.
* manual/tunables.texi (glibc.malloc.tcache_count): Update maximum.
The tgkill function is sometimes used in crash handlers.
<bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h>
(which was added for the gettid system call wrapper).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The tcache counts[] array is a char, which has a very small range and thus
may overflow. When setting tcache_count tunable, there is no overflow check.
However the tunable must not be larger than the maximum value of the tcache
counts[] array, otherwise it can overflow when filling the tcache.
[BZ #24531]
* malloc/malloc.c (MAX_TCACHE_COUNT): New define.
(do_set_tcache_count): Only update if count is small enough.
* manual/tunables.texi (glibc.malloc.tcache_count): Document max value.
The twalk function is very difficult to use in a multi-threaded
program because there is no way to pass external state to the
iterator function.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On Linux, we define _POSIX_PRIORITY_SCHEDULING, but functions such
as sched_setparam and sched_setscheduler apply to individual threads,
not processes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As discussed during development for glibc 2.29, when we increased the
required minimum GCC version for building glibc to GCC 5, working
purely based on the times at which such requirements have been
increased in the past it would be appropriate for glibc 2.30 to
require GCC 6 (matching GCC 4.9 having been required for glibc 2.26).
Naming 6.2 specifically as the minimum version then means a separate
version requirement no longer needs to be specified for powerpc64le.
Thus, this patch increases the minimum to 6.2, removing the
documentation of the separate requirement for powerpc64le. It does
not remove the powerpc64le configure test, or any __GNUC_PREREQ that
could be removed as not being in installed headers or files shared
with gnulib; I think such cleanups are best done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 6.2 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Emag is a 64-bit CPU core released by AmpereComputing.
Add its name to cpu list, and corresponding macro as utilities for
later IFUNC dispatch.
* manual/tunables.texi (Tunable glibc.cpu.name): Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_EMAG):
New macro.
* NEWS: Add the list of bugs fixed in 2.29.
* manual/contrib.texi: Update contributors list with some more
names.
* manual/install.texi: Update latest versions of packages
tested.
* INSTALL: Regenerated.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
Add Ares to the midr_el0 list and support ifunc dispatch. Since Ares
supports 2 128-bit loads/stores, use Neon registers for memcpy by
selecting __memcpy_falkor by default (we should rename this to
__memcpy_simd or similar).
* manual/tunables.texi (glibc.cpu.name): Add ares tunable.
* sysdeps/aarch64/multiarch/memcpy.c (__libc_memcpy): Use
__memcpy_falkor for ares.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_ARES):
Add new define.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add ares cpu.
@var is intended for placeholders (such as function parameters).
Actual variables need to use @code because @var causes upper-case
output, resulting in a different C identifier.
This patch updates some miscellaneous files from their upstream
sources (thereby bringing in copyright date updates for some of those
files).
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-12-28.17 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2019-01-01.
* scripts/config.sub: Update to version 2019-01-01.
* scripts/move-if-change: Update from gnulib.
We know that building glibc with GCC 4.9 is broken on various
platforms (bug 23993). As it's more than a year since we last
increased the minimum GCC version to build glibc, this patch changes
the requirement to be GCC 5 or later (indeed, based on 4.9 having been
required for building 2.26, it would be consistent in terms of timing
to require GCC 6 or later from the 2.30 release onwards). It
deliberately just updates the configure test and corresponding
documentation, leaving removal of no-longer-needed __GNUC_PREREQ tests
for a separate patch.
In the NEWS entry, the requirement for a newer GCC version for
powerpc64le is reiterated (as in the entry for the 4.9 requirement in
2.26) to avoid suggesting the version requirement there has gone down.
(If that version goes up further as part of support for binary128 long
double, of course the wording would change at that time.)
Tested for x86_64.
[BZ #23993]
* configure.ac (libc_cv_compiler_ok): Require GCC 5 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64): Add.
* manual/maint.texi: Document Y2038 symbol handling.
* time/localtime.c
(__localtime64): Add.
[__TIMERSIZE != 64] (__localtime): Turn into a wrapper.
This patch eliminates the gen-py-const.awk variant of gen-as-const,
switching to use of gnu-as-const.py (with a new --python option) to
process .pysym files (i.e., to generate nptl_lock_constants.py), as
the syntax of those files is identical to that of .sym files.
Note that the generated nptl_lock_constants.py is *not* identical to
the version generated by the awk script. Apart from the trivial
changes (comment referencing the new script, and output being sorted),
the constant FUTEX_WAITERS, PTHREAD_MUTEXATTR_FLAG_BITS,
PTHREAD_MUTEXATTR_FLAG_PSHARED and PTHREAD_MUTEX_PRIO_CEILING_MASK are
now output as positive rather than negative constants (on x86_64
anyway; maybe not necessarily on 32-bit systems):
< FUTEX_WAITERS = -2147483648
---
> FUTEX_WAITERS = 2147483648
< PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
< PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
---
> PTHREAD_MUTEXATTR_FLAG_BITS = 4043304960
> PTHREAD_MUTEXATTR_FLAG_PSHARED = 2147483648
< PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
---
> PTHREAD_MUTEX_PRIO_CEILING_MASK = 4294443008
This is because gen-as-const has a cast of the constant value to long
int, which gen-py-const lacks.
I think the positive values are more logically correct, since the
constants in question are in fact unsigned in C. But to reliably
produce gen-as-const.py output for constants that always (in C and
Python) reflects the signedness of values with the high bit of "long
int" set would mean more complicated logic needs to be used in
computing values.
The more correct positive values by themselves produce a failure of
nptl/test-mutexattr-printers, because masking with
~PTHREAD_MUTEXATTR_FLAG_BITS & ~PTHREAD_MUTEX_NO_ELISION_NP now leaves
a bit -1 << 32 in the Python value, resulting in a KeyError exception.
To avoid that, places masking with ~ of one of the constants in
question are changed to mask with 0xffffffff as well (this reflects
how ~ in Python applies to an infinite-precision integer whereas ~ in
C does not do any promotions beyond the width of int).
Tested for x86_64.
* scripts/gen-as-const.py (main): Handle --python option.
* scripts/gen-py-const.awk: Remove.
* Makerules (py-const-script): Use gen-as-const.py.
($(py-const)): Likewise.
* nptl/nptl-printers.py (MutexPrinter.read_status_no_robust): Mask
with 0xffffffff together with ~(PTHREAD_MUTEX_PRIO_CEILING_MASK).
(MutexAttributesPrinter.read_values): Mask with 0xffffffff
together with ~PTHREAD_MUTEXATTR_FLAG_BITS and
~PTHREAD_MUTEX_NO_ELISION_NP.
* manual/README.pretty-printers: Update reference to
gen-py-const.awk.
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-09-21.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-11-28.
* scripts/config.sub: Update to version 2018-11-28.
* scripts/install-sh: Update to version 2018-03-11.20.
* scripts/mkinstalldirs: Update to version 2018-03-07.03.
* scripts/move-if-change: Update to version 2018-03-07 03:47.
This patch does not have any functionality change, we only provide a spin
count tunes for pthread adaptive spin mutex. The tunable
glibc.pthread.mutex_spin_count tunes can be used by system administrator to
squeeze system performance according to different hardware capabilities and
workload characteristics.
The maximum value of spin count is limited to 32767 to avoid the overflow
of mutex->__data.__spins variable with the possible type of short in
pthread_mutex_lock ().
The default value of spin count is set to 100 with the reference to the
previous number of times of spinning via trylock. This value would be
architecture-specific and can be tuned with kinds of benchmarks to fit most
cases in future.
I would extend my appreciation sincerely to H.J.Lu for his help to refine
this patch series.
* manual/tunables.texi (POSIX Thread Tunables): New node.
* nptl/Makefile (libpthread-routines): Add pthread_mutex_conf.
* nptl/nptl-init.c: Include pthread_mutex_conf.h
(__pthread_initialize_minimal_internal) [HAVE_TUNABLES]: Call
__pthread_tunables_init.
* nptl/pthreadP.h (MAX_ADAPTIVE_COUNT): Remove.
(max_adaptive_count): Define.
* nptl/pthread_mutex_conf.c: New file.
* nptl/pthread_mutex_conf.h: New file.
* sysdeps/generic/adaptive_spin_count.h: New file.
* sysdeps/nptl/dl-tunables.list: New file.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Use
max_adaptive_count () not MAX_ADAPTIVE_COUNT.
* nptl/pthread_mutex_timedlock.c (__pthrad_mutex_timedlock):
Likewise.
Suggested-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Kemi.wang <kemi.wang@intel.com>
On platforms where long double used to have the same format as double,
but later switched to a different format (alpha, s390, sparc, and
powerpc), accessing the older behavior is possible and it happens via
__nldbl_* functions (not on the API, but accessible from header
redirection and from compat symbols). These functions write to the
global flag __ldbl_is_dbl, which tells other functions that long double
variables should be handled as double. This patch takes the first step
towards removing this global flag and creates __vstrfmon_l_internal,
which takes an explicit flags parameter.
This change arguably makes the generated code slightly worse on
architectures where __ldbl_is_dbl is never true; right now, on those
architectures, it's a compile-time constant; after this change, the
compiler could theoretically prove that __vstrfmon_l_internal was
never called with a nonzero flags argument, but it would probably need
LTO to do it. This is not performance critical code and I tend to
think that the maintainability benefits of removing action at a
distance are worth it. However, we _could_ wrap the runtime flag
check with a macro that was defined to ignore its argument and always
return false on architectures where __ldbl_is_dbl is never true, if
people think the codegen benefits are important.
Tested for powerpc and powerpc64le.
In the description of gcvt, add missing closing parenthesis in the
comparison with sprintf.
* manual/arith.texi (gcvt): Add missing closing parenthesis.
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
This patch extends gen-libm-test.py to generate the ulps table for the
manual, so meaning there is only a single ulps file parser needed and
another Perl script is eliminated. As with the introduction of
gen-libm-test.py, this is designed to generate exactly the same
libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still
shorter in lines than the old gen-libm-test.pl even after this patch.)
Note that this introduces a Python dependency for building the manual,
which is thus noted in install.texi and NEWS.
Tested building html / info / pdf versions of the manual.
* math/gen-libm-test.py: Import os.
(ALL_FLOATS_MANUAL): New constant.
(ALL_FLOATS_SUFFIX): Likewise.
(Ulps.all_functions): New function.
(real_all_ulps): Likewise.
(generate_err_table_sub): Likewise.
(generate_err_table): Likewise.
(main): Handle -s and -m options.
* manual/libm-err-tab.pl: Remove.
* manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py
instead of libm-err-tab.pl.
[$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no)
!= no].
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build manual.
* INSTALL: Regenerated.
Job control was made mandatory in POSIX.1-2001: compare
<http://pubs.opengroup.org/onlinepubs/7990989775/xsh/unistd.h.html> with
<http://pubs.opengroup.org/onlinepubs/009695399/basedefs/unistd.h.html>.
Seventeen years later, we need not devote an entire manual @node to
warning people that this was once an optional POSIX feature.
* manual/job.texi (Job Control is Optional): Remove node, as
job control has not been optional in quite some time.
(Job Control): Mention briefly that systems older than
POSIX.1-2001 might not support job control.
* manual/conf.texi (_POSIX_JOB_CONTROL): Will always be
defined on systems conforming to POSIX.1-2001.
For architectures and ABIs that are added in version 2.29 or later the
option --enable-obsolete-nsl is no longer available, and no libnsl
compatibility library is built.
The install.texi documentation of uses of Perl and Python is
substantially out of date.
The description of Perl is "to test the installation" (which I
interpret as referring to test-installation.pl), but it's used for
more tests than that, and to build the manual, and to regenerate one
file in the source tree.
The description of Python is only for pretty-printer tests, but it's
used for other tests / benchmarks as well (and for other internal uses
such as updating Unicode data, for which we already require Python 3,
but I think install.texi only needs to describe uses from the main
glibc Makefiles).
This patch updates the descriptions of what those tools are used for.
The Python information (and information about other tools for testing
pretty printers) was awkwardly in the middle of the general
description of building and testing glibc, rather than with the rest
of information about tools used in glibc build and test; this patch
moves the information about those tools into the main list.
Tested with regeneration of INSTALL as well as "make info" and "make
pdf".
* manual/install.texi (Configuring and compiling): Do not list
tools used for testing pretty printers here.
(Tools for Compilation): List Python, PExpect and GDB here.
Update descriptions of uses of Perl and Python.
* INSTALL: Regenerate.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates the manual and adds a new chapter to the manual,
explaining types macros, constants and functions defined by ISO C11
threads.h standard.
[BZ# 14092]
* manual/debug.texi: Update adjacent chapter name.
* manual/probes.texi: Likewise.
* manual/threads.texi (ISO C Threads): New section.
(POSIX Threads): Convert to a section.
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
This is a major rewrite of the description of 'crypt', 'getentropy',
and 'getrandom'.
A few highlights of the content changes:
- Throughout the manual, public headers, and user-visible messages,
I replaced the term "password" with "passphrase", the term
"password database" with "user database", and the term
"encrypt(ion)" with "(one-way) hashing" whenever it was applied to
passphrases. I didn't bother making this change in internal code
or tests. The use of the term "password" in ruserpass.c survives,
because that refers to a keyword in netrc files, but it is adjusted
to make this clearer.
There is a note in crypt.texi explaining that they were
traditionally called passwords but single words are not good enough
anymore, and a note in users.texi explaining that actual passphrase
hashes are found in a "shadow" database nowadays.
- There is a new short introduction to the "Cryptographic Functions"
section, explaining how we do not intend to be a general-purpose
cryptography library, and cautioning that there _are_, or have
been, legal restrictions on the use of cryptography in many
countries, without getting into any kind of detail that we can't
promise to keep up to date.
- I added more detail about what a "one-way function" is, and why
they are used to obscure passphrases for storage. I removed the
paragraph saying that systems not connected to a network need no
user authentication, because that's a pretty rare situation
nowadays. (It still says "sometimes it is necessary" to
authenticate the user, though.)
- I added documentation for all of the hash functions that glibc
actually supports, but not for the additional hash functions
supported by libxcrypt. If we're going to keep this manual section
around after the transition is more advanced, it would probably
make sense to add them then.
- There is much more detailed discussion of how to generate a salt,
and the failure behavior for crypt is documented. (Returning an
invalid hash on failure is what libxcrypt does; Solar Designer's
notes say that this was done "for compatibility with old programs
that assume crypt can never fail".)
- As far as I can tell, the header 'crypt.h' is entirely a GNU
invention, and never existed on any other Unix lineage. The
function 'crypt', however, was in Issue 1 of the SVID and is now
in the XSI component of POSIX. I tried to make all of the
@standards annotations consistent with this, but I'm not sure I got
them perfectly right.
- The genpass.c example has been improved to use getentropy instead
of the current time to generate the salt, and to use a SHA-256 hash
instead of MD5. It uses more random bytes than is strictly
necessary because I didn't want to complicate the code with proper
base64 encoding.
- The testpass.c example has three hardwired hashes now, to
demonstrate that different one-way functions produce different
hashes for the same input. It also demonstrates how DES hashing
only pays attention to the first eight characters of the input.
- There is new text explaining in more detail how a CSPRNG differs
from a regular random number generator, and how
getentropy/getrandom are not exactly a CSPRNG. I tried not to make
specific falsifiable claims here. I also tried to make the
blocking/cancellation/error behavior of both getentropy and
getrandom clearer.
In preparation for a major revision of the documentation for
crypt(_r), getentropy, and getrandom, reorganize crypt.texi. This
patch does not change any text; it only deletes and moves text.
The description of 'getpass' moves to terminal.texi, since all it does
is read a password from the controlling terminal with echo disabled.
The "Legal Problems" section of crypt.texi is dropped, and the
introductory text is shifted down to the "Encrypting Passwords"
section; the next patch will add some new introductory text.
Also, it is no longer true that crypt.texi's top @node needs to have
no pointers. That was a vestige of crypt/ being an add-on. (makeinfo
itself doesn't need @node pointers anymore, but the scripts that
assemble the libc manual's topmost node rely on each chapter-level
node having them.)
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly. Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.
The idea follows other LFS interfaces that provide two symbols:
1. A new LFS fcntl64 is added on default ABI with the usual macros to
select it for FILE_OFFSET_BITS=64.
2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
struct.
3. Keep a compat symbol with old broken semantic for architectures
that do not define __OFF_T_MATCHES_OFF64_T.
So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required. So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).
Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #20251]
* NEWS: Mention fcntl64 addition.
* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
* login/utmp_file.c: Likewise.
* sysdeps/posix/fdopendir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/unix/pt-fcntl.c: Likewise.
* include/fcntl.h (__libc_fcntl64, __fcntl64,
__fcntl64_nocancel_adjusted): New prototype.
(__fcntl_nocancel_adjusted): Remove prototype.
* io/Makefile (routines): Add fcntl64.
(CFLAGS-fcntl64.c): New rule.
* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
* io/fcntl.h (fcntl64): Add prototype and redirect if
__USE_FILE_OFFSET64 is defined.
* io/fcntl64.c: New file.
* manual/llio.text: Add a note for which commands fcntl acts a
cancellation point.
* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
New symbols.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
non-LFS case.
* sysdeps/unix/sysv/linux/fcntl64.c: New file.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
(tests-internal): Add tst-ofdlocks-compat.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(fcntl64): New symbol.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
fcntl64): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-04-30 Raymond Nicholson <rain1@airmail.cc>
* manual/startup.texi (Aborting a Program): Remove inappropriate joke.
This complies with the decision of the project leader and primary and
ultimate maintainer, who partially delegated maintainership to myself
and others under certain constraints.
This is also in line with the community-agreed procedures.
It is obvious that we didn't have consensus on a decision to install
that patch, since both sides are still arguing over it.
As for the decision to reverse the deletion, if we even need one to
counter a move that did not have consensus, although nobody else offered
to install the reversal and restore the status prior to the fait
accompli, and some explicitly refused to do so themselves, nobody
objected when I offered to do so. Therefore, by the same reasoning that
led to the mistaken installation of the patch, and after a much longer
wait for objections, I understand there is consensus on my reverting it.
Since tile support has been removed from the Linux kernel for 4.17,
this patch removes the (unmaintained) port to tilegx from glibc (the
tilepro support having been previously removed). This reflects the
general principle that a glibc port needs upstream support for the
architecture in all the components it build-depends on (so binutils,
GCC and the Linux kernel, for the normal case of a port supporting the
Linux kernel but no other OS), in order to be maintainable.
Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile,
there are updates to various comments referencing tile for which
removal of those references seemed appropriate. The configuration is
removed from README and from build-many-glibcs.py. contrib.texi keeps
mention of removed contributions, but I updated Chris Metcalf's entry
to reflect that he also contributed the non-removed support for the
generic Linux kernel syscall interface.
__ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used
by tile.
* sysdeps/tile: Remove.
* sysdeps/unix/sysv/linux/tile: Likewise.
* README (tilegx-*-linux-gnu): Remove from list of supported
configurations.
* manual/contrib.texi (Contributors): Mention Chris Metcalf's
contribution of support for generic Linux kernel syscall
interface.
* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
tilegx configurations.
(Config.install_linux_headers): Do not handle tile.
* sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile
in comment.
* sysdeps/unix/sysv/linux/nios2/Makefile: Likewise.
* sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
* sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile
in comment.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
The example did not work because the null byte was not converted, and
mbrtowc was called with a zero-length input string. This results in a
(size_t) -2 return value, so the function always returns NULL.
The size computation for the heap allocation of the result was
incorrect because it did not deal with integer overflow.
Error checking was missing, and the allocated memory was not freed on
error paths. All error returns now set errno. (Note that there is an
assumption that free does not clobber errno.)
The slightly unportable comparision against (size_t) -2 to catch both
(size_t) -1 and (size_t) -2 return values is gone as well.
A null wide character needs to be stored in the result explicitly, to
terminate it.
The description in the manual is updated to deal with these finer
points. The (size_t) -2 behavior (consuming the input bytes) matches
what is specified in ISO C11.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): Remove errno
values from Linux-specific section now that it is in the GNU section.
* sysdeps/gnu/errlist.c: Regenerate.
* hurd/Makefile (routines): Add hurdlock.
* hurd/Versions (GLIBC_PRIVATE): Added new entry to export the above
interface.
(HURD_CTHREADS_0.3): Remove __libc_getspecific.
* hurd/hurdpid.c: Include <lowlevellock.h>
(_S_msg_proc_newids): Use lll_wait to synchronize.
* hurd/hurdsig.c: (reauth_proc): Use __mutex_lock and __mutex_unlock.
* hurd/setauth.c: Include <hurdlock.h>, use integer for synchronization.
* mach/Makefile (lock-headers): Remove machine-lock.h.
* mach/lock-intern.h: Include <lowlevellock.h> instead of
<machine-lock.h>.
(__spin_lock_t): New type.
(__SPIN_LOCK_INITIALIZER): New macro.
(__spin_lock, __spin_unlock, __spin_try_lock, __spin_lock_locked,
__mutex_init, __mutex_lock_solid, __mutex_unlock_solid, __mutex_lock,
__mutex_unlock, __mutex_trylock): Use lll to implement locks.
* mach/mutex-init.c: Include <lowlevellock.h> instead of <cthreads.h>.
(__mutex_init): Initialize with lll.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): New errno values.
* sysdeps/mach/Makefile: Add libmachuser as dependencies for libs
needing lll.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* sysdeps/mach/hurd/cthreads.c (__libc_getspecific): Remove function.
* sysdeps/mach/hurd/bits/libc-lock.h: Remove file.
* sysdeps/mach/hurd/setpgid.c: Include <lowlevellock.h>.
(__setpgid): Use lll for synchronization.
* sysdeps/mach/hurd/setsid.c: Likewise with __setsid.
* sysdeps/mach/bits/libc-lock.h: Include <tls.h> and <lowlevellock.h>
instead of <cthreads.h>.
(_IO_lock_inexpensive): New macro
(__libc_lock_recursive_t, __rtld_lock_recursive_t): New structures.
(__libc_lock_self0): New declaration.
(__libc_lock_owner_self): New macro.
(__libc_key_t): Remove type.
(_LIBC_LOCK_INITIALIZER): New macro.
(__libc_lock_define_initialized, __libc_lock_init, __libc_lock_fini,
__libc_lock_fini_recursive, __rtld_lock_fini_recursive,
__libc_lock_lock, __libc_lock_trylock, __libc_lock_unlock,
__libc_lock_define_initialized_recursive,
__rtld_lock_define_initialized_recursive,
__libc_lock_init_recursive, __libc_lock_trylock_recursive,
__libc_lock_lock_recursive, __libc_lock_unlock_recursive,
__rtld_lock_initialize, __rtld_lock_trylock_recursive,
__rtld_lock_lock_recursive, __rtld_lock_unlock_recursive
__libc_once_define, __libc_mutex_unlock): Reimplement with lll.
(__libc_lock_define_recursive, __rtld_lock_define_recursive,
_LIBC_LOCK_RECURSIVE_INITIALIZER, _RTLD_LOCK_RECURSIVE_INITIALIZER):
New macros.
Include <libc-lockP.h> to reimplement libc_key* with pthread_key*.
* hurd/hurdlock.c: New file.
* hurd/hurdlock.h: New file.
* mach/lowlevellock.h: New file
The description of the interplay between feature test macros and
compiler options in the description of _DEFAULT_SOURCE is a little
confusing, and dated, so clarify the situation, and don't assume a
specific value for _DEFAULT_SOURCE.
Also, _DEFAULT_SOURCE is supposed to be defined if none of the C/POSIX
feature test macros are defined, but the condition was lacking a test
for _ISOC11_SOURCE, so that is also addressed.
[BZ #22862]
* include/features.h: Add _ISOC11_SOURCE to test for whether
to define _DEFAULT_SOURCE.
* manual/creature.texi (_DEFAULT_SOURCE): Improve
documentation.
The current description refers to ISO C99 not being widely adopted,
which it is believed to be now.
* manual/creature.texi (_ISOC99_SOURCE): Update the dated
description.
Several feature test macros are documented in features.h but absent in
the manual, and some documented macros accept undocumented values.
This commit updates the manual to mention all the accepted macros,
along with any values that hold special meaning.
* manual/creature.texi (_POSIX_C_SOURCE): Document special
values of 199606L, 200112L, and 200809L.
(_XOPEN_SOURCE): Document special values of 600 and 700.
(_ISOC11_SOURCE): Document macro.
(_ATFILE_SOURCE): Likewise.
(_FORTIFY_SOURCE): Likewise.
This is a minor rewording to clarify the behaviour of
get_current_dir_name. Additionally, the @vindex is moved above the
@deftypefun so that following links give a better result with regard
to context.
[BZ #6889]
* manual/filesys.texi (get_current_dir_name): Clarify
behaviour.
The opening parenthesis for function arguments in an @deftypefun need
to be separated from the function name. This isn't just a matter of
the GNU coding style---it causes the "(void" (in this case) to be
rendered as a part of the function name, causing a visual defect, and
also results in a warning to the following effect during `make pdf':
Warning: unbalanced parentheses in @def...)
* manual/platform.texi (__riscv_flush_icache): Fix @deftypefun
syntax.
There are some bug reports from people setting CFLAGS not including a
-O option and then being confused when the build fails. This patch
addresses this by documenting the proper use of CC and CFLAGS in more
detail - saying what options should go where and specifying the
requirement to compile with optimization.
The previous text incorrectly used @var markup with CC and CFLAGS.
The correct markup for environment variables is @env, but it's also
the case that passing such variables explicitly on the configure
command line is preferred to passing them in the environment, so this
patch changes the documentation to describe passing them on the
command line (and uses @code).
In many cases putting options in the wrong place may in fact work, but
I believe what I've specified is the correct rule for which options to
put where.
[BZ #20980]
[BZ #21234]
* manual/install.texi (Configuring and compiling): Describe
passing CC and CFLAGS on configure command line, not as
environment variables. Use @code markup on those variables.
Specify what options go in CC and what go in CFLAGS. Note the
requirement to compile with optimization.
* INSTALL: Regenerated.
Remove the slow paths from pow. Like several other double precision math
functions, pow is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP. A simple test over a few hundred million
values shows pow is 10% faster on average. This fixes BZ #13932.
[BZ #13932]
* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
* benchtests/pow-inputs: Update comment for slow path cases.
* manual/probes.texi (slowpow_p10): Delete removed probe.
(slowpow_p10): Likewise.
* math/Makefile: Remove halfulp.c and slowpow.c.
* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/generic/math_private.h (__exp1): Remove error argument.
(__halfulp): Remove.
(__slowpow): Remove.
* sysdeps/i386/fpu/halfulp.c: Delete file.
* sysdeps/i386/fpu/slowpow.c: Likewise.
* sysdeps/ia64/fpu/halfulp.c: Likewise.
* sysdeps/ia64/fpu/slowpow.c: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
improve comments and add error analysis.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
(power1): Remove function:
(log1): Remove error argument, add error analysis.
(my_log2): Remove function.
* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
A number of cross-references to the GCC info manual cause Texinfo
warnings; e.g.:
./creature.texi:11: warning: @xref node name should not contain `.'
This is due to "gcc.info" being used in the INFO-FILE-NAME (fourth)
argument. Changing it to "gcc" removes these warnings. (Manually
confirmed equivalent behaviour for make info, html, and pdf.)
* manual/creature.texi: Convert references to gcc.info to gcc.
* manual/stdio.texi: Likewise.
* manual/string.texi: Likewise.
Remove the slow paths from log. Like several other double precision math
functions, log is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
Interestingly removing the slow paths makes hardly any difference in practice:
the worst case error is still ~0.502ULP, and exp(log(x)) shows identical results
before/after on many millions of random cases. All GLIBC math tests pass on
AArch64 and x64 with no change in ULP error. A simple test over a few hundred
million values shows log is now 18% faster on average.
* manual/probes.texi (slowlog): Delete documentation of removed probe.
(slowlog_inexact): Likewise
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Remove slow paths.
* sysdeps/ieee754/dbl-64/ulog.h: Remove unused declarations.
This function is used by GCC to enforce ordering between data writes and
instruction fetches, and while we'd prefer that users rely on the GCC
intrinsic when possible this is user visible in case that's not
possible.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/platform.texi: Add RISC-V documenation for
__riscv_flush_icache.
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
"%OB" is considered a conversion specifier ("B" is the format
specifier), and the list of format specifiers for months in the
description of the optional "O" modifier was incomplete. A
cross-reference from the ALTMON_* constants to the strftime section
is also provided. Lastly, some grammatical fixes (commas) are made
and paragraphs refactored (rewrapped).
* manual/locale.texi (ALTMON_1, ALTMON_2, ALTMON_3, ALTMON_4,
ALTMON_5, ALTMON_6, ALTMON_7, ALTMON_8, ALTMON_9, ALTMON_10,
ALTMON_11, ALTMON_12): Improve documentation.
* manual/time.texi (strftime): Likewise.
[BZ #10871]
* manual/locale.texi: Document ALTMON_1..12 constants for
nl_langinfo. Specify when to use ALTMON instead of MON.
* manual/time.texi (strftime, strptime): Document GNU extension
permitting O modifier with %B and %b. Specify when to use
%OB instead of %B.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates various files from their upstream sources. This
brings in copyright date updates for some of those files.
Tested for x86_64.
* manual/texinfo.tex: Update to version 2017-12-26.21 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-01-01.
* scripts/config.sub: Update to version 2018-01-01.
* scripts/move-if-change: Update from gnulib.
The current glibc manual is ambiguous about the errno value on success
and suggests that it is left unchanged. Some functions might and
sometimes do change the errno value, however they never set it to 0.
This patch from Zack Weinberg clarifies this section of the manual.
Changelog:
[BZ #22615]
* manual/errno.texi (Checking for Errors): Explicitly say that errno
might be set on success.
That way it matches the standard and the behaviour of the finite
function.
Changelog:
[BZ #22596]
* manual/arith.texi (finite): Fix the description of the return
value.
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2017-12-18.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2017-12-17.
* scripts/config.sub: Update to version 2017-11-23.
* scripts/install-sh: Update to version 2017-09-23.17.
* scripts/move-if-change: Update to version 2017-09-13 06:45.
To build static PIE, all .o files are compiled with -fPIE. Since
--enable-static-pie is designed to provide additional security hardening
benefits, it also implies that glibc programs and tests are created as
dynamic position independent executables (PIE) by default for better
security hardening.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
* manual/install.texi: Document that --enable-static-pie
implies PIE.
* INSTALL: Regenerated.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There is a subtle non-determinism when building glibc.
This depends on whether the glibc is built using the distibuted
file intl/plural.c or built using the generated file intl/plural.c.
These two files (intl/plural.c generated vs. distributed) are slightly
different, hence we may end up with slightly different libraries.
Originally, having "bison" installed was optional. So if "bison" was
not present, we always built libraries with the distributed plural.c.
If bison was installed, we *** may have *** replaced the distributed
file plural.c with a new plural.c generated from plural.y. if the
timestamps triggered this rule:
plural.c plural.y
$(BISON) $(BISONFLAGS) $@ $^
Given that timestamps are not preserved in GIT repositories, the above
rule is not reliable without explicitly touching plural.c or plural.y.
In other words, the rule may or may not have fired.
In summary: there are two distinct sources of non-determinism:
1. Having "bison" installed or not
2. Having "bison" installed but timestamps poorly defined.
This patch fixes this by requiring "bison" being installed
and by always generating intl/plural.c from intl/plural.y.
(This is achieved by simply removing checked-in intl/plural.c)
[BZ #22432]
* configure.ac (BISON): Require to be present.
* configure: Regenerated.
* intl/Makefile (generated): Add plural.c.
[$(BISON) != no]: Make code unconditional.
(plural.c): Change rule to $(objpfx)plural.c.
($(objpfx)plural.o): Depend on $(objpfx)plural.c.
* intl/plural.c: Remove.
* manual/install.texi (Tools for Compilation): Document bison as
required.
* INSTALL: Regenerated.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Also remove a comment about performance. fwrite vs writev performance
is a very complex topic and cannot be reduced to a simple advice based
on transfer size.
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
Commit 15e9a4f378 introduced ENODEV as a possible
error condition for ttyname and ttyname_r. Update the manual to mention this GNU
extension.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
The _SC_LEVEL1_DCACHE_LINESIZE is reported using the contents of the
ctr_el0 register, which tells us the minimum observable cache line
size by userspace. This typically is the same as the L1 cache line
size, but that may not always be true. It could be a higher level
cache line size as long as cache cleaning and invalidation work
correctly with that line size in userspace. The falkor core for
example reports the L2 line size as the dcache line size in CTR_EL0
while also reporting the correct L1 dcache line size via CCSIDR_EL1.
* manual/conf.texi (_SC_LEVEL1_DCACHE_LINESIZE,
_SC_LEVEL1_ICACHE_LINESIZE): Document aarch64 caveat.
Reviewed-by: Rical Jasan <ricaljasan@pacific.net>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Write short descriptions for each of the cache information sysconf
variables.
* manual/conf.texi (_SC_LEVEL1_ICACHE_SIZE,
_SC_LEVEL1_ICACHE_ASSOC, _SC_LEVEL1_ICACHE_LINESIZE,
_SC_LEVEL1_DCACHE_SIZE, _SC_LEVEL1_DCACHE_ASSOC,
_SC_LEVEL1_DCACHE_LINESIZE, _SC_LEVEL2_CACHE_SIZE,
_SC_LEVEL2_CACHE_ASSOC, _SC_LEVEL2_CACHE_LINESIZE,
_SC_LEVEL3_CACHE_SIZE, _SC_LEVEL3_CACHE_ASSOC,
_SC_LEVEL3_CACHE_LINESIZE, _SC_LEVEL4_CACHE_SIZE,
_SC_LEVEL4_CACHE_ASSOC, _SC_LEVEL4_CACHE_LINESIZE): New
variables.
Reviewed-by: Rical Jasan <ricaljasan@pacific.net>
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build. Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.
localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on. Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used. NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism. libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree. Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.
Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is. This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure. Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).
Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree. Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).
Tested for x86_64, and with build-many-glibcs.py.
* configure.ac (--enable-add-ons): Remove option.
(machine): Do not mention add-ons in comment.
(LIBC_PRECONFIGURE): Likewise.
(add_ons): Remove variable and sanity checks and logic to locate
add-ons.
(add_ons_automatic): Remove variable.
(configured_add_ons): Likewise.
(add_ons_sfx): Likewise.
(add_ons_pfx): Likewise.
(add_on_subdirs): Likewise.
(sysnames_add_ons): Likewise. Remove loop over add-ons and
consideration of add-ons in Implies handling.
(sysdeps_add_ons): Likewise.
* configure: Regenerated.
* libidn/configure.ac: Remove.
* libidn/configure: Likewise.
* sysdeps/unix/inet/configure.ac: New file.
* sysdeps/unix/inet/configure: New generated file.
* sysdeps/unix/inet/Subdirs: Add libidn.
* Makeconfig (sysdeps-srcdirs): Remove variable.
(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
($(common-objpfx)config.status): Do not depend on add-on files.
($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
comment.
(all-subdirs): Do not include $(add-on-subdirs).
* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
* config.make.in (add-ons): Remove variable.
(add-on-subdirs): Likewise.
(sysdeps-add-ons): Likewise.
* manual/Makefile (add-chapters): Remove.
($(objpfx)texis): Do not depend on $(add-chapters).
(nonexamples): Do not handle $(add-chapters).
(examples): Do not handle $(add-ons).
(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
libc-texinfo.sh.
* manual/install.texi (Installation): Do not mention add-ons.
(--enable-add-ons): Do not document configure option.
* INSTALL: Regenerated.
* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
* manual/maint.texi (Hierarchy Conventions): Do not mention
add-ons.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
--enable-add-ons.
* scripts/gen-sorted.awk: Do not handle Subdirs files from
add-ons.
* scripts/test-installation.pl: Do not handle glibc-compat add-on.
* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
This patch removes the Banner mechanism, with the last remaining
Banner file replaced by a contrib.texi entry. This accords with the
principle that the output of running libc.so.6 is not the place to
credit particular contributions (the manual is), and with all other
configuration options not mentioned there, it doesn't seem appropriate
to focus there on the one question of whether the one remaining piece
configured as an add-on was enabled or not.
Tested for x86_64.
* csu/Makefile (generated): Do not add version-info.h.
(before-compile): Likewise.
(all-Banner-files): Remove variable.
($(objpfx)version-info.h): Remove rule.
* csu/version.c (banner): Do not include "version-info.h".
* libidn/Banner: Remove.
* manual/contrib.texi (Simon Josefsson): New entry.
Various subdirectories of glibc include Banner files to put some text
in the output of executing libc.so.6, under "Available extensions".
Some of those subdirectories (e.g. crypt) may originally have been
add-ons (and so optional, so a particular glibc build might or might
not have included them), but except for libidn they aren't now (or if
only included in some builds, in the case of soft-fp, the inclusion
depends on the architecture for which glibc is configured rather than
having any glibc configuration for which it's an optional feature),
and it doesn't seem useful for the libc.so.6 output to call out a few
features like that.
This patch removes the non-add-on Banner files, updating contrib.texi
where they noted contributions not otherwise mentioned there.
Tested for x86_64.
* crypt/Banner: Remove file.
* nptl/Banner: Likewise.
* resolv/Banner: Likewise.
* soft-fp/Banner: Likewise.
* nptl/Makefile ($(objpfx)banner.h): Remove rule.
($(objpfx)version.d): Remove dependency on banner.h.
($(objpfx)version.os): Likewise.
* nptl/version.c (banner): Do not include banner.h.
* manual/contrib.texi: Update entries for Richard Henderson, Jakub
Jelinek and BIND code.
* manual/tunables.texi (glibc.tune.cpu): Add thunderx2t99 and
thunderx2t99p1 to list of cpu names.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add thunderx2t99 and thunderx2t99p1 entries to cpu_list.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Clean up calls to malloc_printerr and trim its argument list.
This also removes a few bits of work done before calling
malloc_printerr (such as unlocking operations).
The tunable/environment variable still enables the lightweight
additional malloc checking, but mallopt (M_CHECK_ACTION)
no longer has any effect.
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
The manual contradicted itself by saying the number of bits in an
integer type needed to be computed, and then listing a number of
macros that later standards provided for exactly that. The entire
section has been reworked to provide those macros first, while
preserving the documentation of CHAR_BIT and the associated examples
within that context.
* manual/lang.texi
(Computing the Width of an Integer Data Type): Rename section
to "Width of an Integer Type". Remove inaccurate statement
regarding lack of C language facilities for determining width
of integer types, and reorder content to improve flow and
context of discussion.
The ISO version in which va_copy was introduced is made explicit, and
__va_copy is given @standards. The description is updated to be more
clear about the origins of each macro, and the reader is informed
these macros are now provided by the compiler (information previously
embedded in a Texinfo @comment).
* lang.texi (va_copy): Change standard from ISO to C99.
(__va_copy): Add standard and header annotation.
Update description for clarity of origins and current use.
As decribed in BZ#759, Linux getcontext implementation on Linux does
differs from other SysV system about the returned uc_stack. This is
true not only for i386, but for all the architecture I could actually
check (aarch64, arm, alpha, hppa, m68k, mips, mips64, mips64n32,
powerpc, powerpc64, powerpc64le, s390x, sh, sparc, sparc64, and x86).
And I think we should not change current behavior for some reasons:
1. POSIX 2008 removed this SySV interface for a good reason and changing
this behavior adds nothing for current portable code. POSIX 2001
specification does states that stack should be saved [1] and current
GLIBC code does in a arch-specific manner (inside the mcontext_t)
which allows the setcontext to work correctly.
2. Changing this behavior would potentially require compat symbols and
I see no gain in adding compat symbols for deprecated interfaces.
3. Also, for comment #2 in BZ#759, it is up to kernel do setup the contents
for ucontext_t and currently it does not provide the stack information
as well. Trying to change it is also another fix that does not worth
the possible gains.
Instead my proposal is to make it clear the current interface may differ
depending of the underlying operational system.
glibc documentation and close this bug as invalid.
[BZ #759]
* manual/setjmp.texi (getcontex): Document uc_stack value on Linux.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/getcontext.html
This single-@item @table is better defined with @deftypevr, since the
CHAR_BIT macro has @standards (being declared in a header), and @items
in @tables are not considered annotatable. Using @deftypevr
automatically includes the macro in the Variable and Constant Macro
Index and ensures its inclusion the Summary of Library Facilities.
@deftypevr is used to record the type of the macro so that it also
appears in the Summary.
The description is updated to mention a later POSIX requirement that
this macro have the value 8.
* manual/lang.texi (CHAR_BIT): Convert from an @table to an
@deftypevr. Change standard from ISO to C90. Mention the
POSIX.1-2001 requirement of the value 8.
Linux 4.12 (b745fafaf70c0a98a2e1e7ac8cb14542889ceb0e) adds a new
p{read,write}v2 flag RWF_NOWAIT. This patch adds it for linux
uio-ext.h header.
Checked on x86_64-linux-gnu (on a 4.10 kernel).
[BZ #21738]
* manual/llio.texi (RWF_NOWAIT): New item.
* misc/tst-preadvwritev2-common.c (do_test_with_invalid_flags):
Add RWF_NOWAIT check.
* sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_NOWAIT): New flag.
Add a new tunable (glibc.tune.cpu) to override CPU identification on
aarch64. This is useful in two cases: one where it is desirable to
pretend to be another CPU for purposes of testing or because routines
written for that CPU are beneficial for specific workloads and second
where the underlying kernel does not support emulation of MRS to get
the MIDR of the CPU.
* elf/dl-tunables.h (tunable_is_name): Move from...
* elf/dl-tunables.c (is_name): ... here.
(parse_tunables, __tunables_init): Adjust.
* manual/tunables.texi: Document glibc.tune.cpu.
* sysdeps/aarch64/dl-tunables.list: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (struct
cpu_list): New type.
(cpu_list): New list of CPU names and their MIDR.
(get_midr_from_mcpu): New function.
(init_cpu_features): Override MIDR if necessary.
This patch implements a requirement of binutils >= 2.25 (up from 2.22)
to build glibc. Tests for 2.24 or later on x86_64 and s390 are
removed. It was already the case, as indicated by buildbot results,
that 2.24 was too old for building tests for 32-bit x86 (produced
internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know
if any configure tests for binutils features are obsolete given the
increased version requirement.
Tested for x86_64.
* configure.ac (AS): Require binutils 2.25 or later.
(LD): Likewise.
* configure: Regenerated.
* sysdeps/s390/configure.ac (AS): Remove version check.
* sysdeps/s390/configure: Regenerated.
* sysdeps/x86_64/configure.ac (AS): Remove version check.
* sysdeps/x86_64/configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for binutils 2.25 or later.
* INSTALL: Regenerated.
This patch enables float128 support for ia64, so that all the
configurations where GCC supports _Float128 / __float128 as an
ABI-distinct type now have glibc support as well. bits/floatn.h
declares the support to be available for GCC 4.4 and later, which is
when the libgcc support was added. The removal of
sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c
defines a function required by the float128 code.
Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6
and GCC 7).
Given how long it is since libm-test-ulps has been updated for ia64, I
think truncating the file and regenerating it from scratch would be a
good idea when doing a regeneration to add float128 ulps. I expect
various ia64 libm issues (at least some already filed in Bugzilla) to
result in test failures even after ulps regeneration, but hopefully
the float128 code will pass tests as it's the same as used on other
architectures.
* sysdeps/ia64/Implies: Add ieee754/float128.
* sysdeps/ia64/bits/floatn.h: New file.
* sysdeps/ia64/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on ia64.
* sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to
Makefile variable.
* sysdeps/ia64/fpu/e_sqrtf128.c: New file.
* sysdeps/ia64/fpu/k_rem_pio2.c: Remove file.
* sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc.
* sysdeps/ia64/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define
based on TEST_COND_binary128 for [__ia64__].
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
This patch enables float128 support for x86_64 and x86. All GCC
versions that can build glibc provide the required support, but since
GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN
tests and some tests of NaN payloads need to be disabled with such
compilers (this does not affect the generated glibc binaries at all,
just the tests). bits/floatn.h declares float128 support to be
available for GCC versions that provide the required libgcc support
(4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd);
compilation-only support was present some time before then, but not
really useful without the libgcc functions.
fenv_private.h needed updating to avoid trying to put _Float128 values
in registers. I make no assertion of optimality of the
math_opt_barrier / math_force_eval definitions for this case; they are
simply intended to be sufficient to work correctly.
Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was
compilation tests only with build-many-glibcs.py to verify the ABI
baseline updates. I have not done any testing for Hurd, although the
float128 support is enabled there as for GNU/Linux.)
* sysdeps/i386/Implies: Add ieee754/float128.
* sysdeps/x86_64/Implies: Likewise.
* sysdeps/x86/bits/floatn.h: New file.
* sysdeps/x86/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on x86_64 and x86.
* sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>.
(math_opt_barrier): Do not put _Float128 values in floating-point
registers.
(math_force_eval): Likewise.
[__x86_64__] (SET_RESTORE_ROUNDF128): New macro.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append
to Makefile variable.
* sysdeps/x86/fpu/e_sqrtf128.c: New file.
* sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc.
* sysdeps/x86/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro.
* math/libm-test-getpayload.inc (getpayload_test_data): Use
XFAIL_FLOAT128_PAYLOAD.
* math/libm-test-setpayload.inc (setpayload_test_data): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data):
Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
On powerpc64le, support for float128 will be enabled, which requires some
compiler features to be present. This patch adds a configure test to check
for such features, which are provided for powerpc64le since GCC 6.2.
Tested for powerpc64 and powerpc64le.
* INSTALL: Regenerate.
* manual/install.texi (Recommended Tools for Compilation): Mention
the powerpc64le-specific requirement in the manual.
* sysdeps/powerpc/powerpc64le/configure.ac: New file with checks
for the compiler features required for building float128.
* sysdeps/powerpc/powerpc64le/configure: New, auto-generated file.
When float128 support gets enabled for powerpc64le, the ULP errors for
float128 functions need to be presented in the manual. This patch adds
support for displaying them.
Tested for powerpc64le and s390x.
* manual/libm-err-tab.pl (@all_floats, %suffices, parse_ulps):
Enable generation of float128 entries on the error table.
In preparation for the documentation of _FloatN and _FloatNx variants of
the remainder function, this patch changes the descriptions of remainder
and drem, so that remainder is described as primary and drem as an
alternative name for the same functionality.
* manual/arith.texi (Remainder Functions): Describe remainder as
primary and drem as an alternative name. Change the comment on
remainder to ISO, since it is defined in ISO C99.
Rename glibc.tune.ifunc to glibc.tune.hwcaps and move it to
sysdeps/x86/dl-tunables.list since it is x86 specicifc. Also
change type of data_cache_size, data_cache_size and
non_temporal_threshold to unsigned long int to match size_t.
Remove usage DEFAULT_STRLEN from cpu-tunables.c.
* elf/dl-tunables.list (glibc.tune.ifunc): Removed.
* sysdeps/x86/dl-tunables.list (glibc.tune.hwcaps): New.
Remove security_level on all fields.
* manual/tunables.texi: Replace ifunc with hwcaps.
* sysdeps/x86/cpu-features.c (TUNABLE_CALLBACK (set_ifunc)):
Renamed to ..
(TUNABLE_CALLBACK (set_hwcaps)): This.
(init_cpu_features): Updated.
* sysdeps/x86/cpu-features.h (cpu_features): Change type of
data_cache_size, data_cache_size and non_temporal_threshold to
unsigned long int.
* sysdeps/x86/cpu-tunables.c (DEFAULT_STRLEN): Removed.
(TUNABLE_CALLBACK (set_ifunc)): Renamed to ...
(TUNABLE_CALLBACK (set_hwcaps)): This. Update comments. Don't
use DEFAULT_STRLEN.
The current IFUNC selection is based on microbenchmarks in glibc. It
should give the best performance for most workloads. But other choices
may have better performance for a particular workload or on the hardware
which wasn't available at the selection was made. The environment
variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used
to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz,
where the feature name is case-sensitive and has to match the ones in
cpu-features.h. It can be used by glibc developers to override the
IFUNC selection to tune for a new processor or improve performance for
a particular workload. It isn't intended for normal end users.
NOTE: the IFUNC selection may change over time. Please check all
multiarch implementations when experimenting.
Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is
provided to set threshold to use non temporal store to NUMBER,
GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache
size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set
shared cache size.
* elf/dl-tunables.list (tune): Add ifunc,
x86_non_temporal_threshold,
x86_data_cache_size and x86_shared_cache_size.
* manual/tunables.texi: Document glibc.tune.ifunc,
glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size
and glibc.tune.x86_non_temporal_threshold.
* sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86/cacheinfo.c
(init_cacheinfo): Check and get data cache size, shared cache
size and non temporal threshold from cpu_features.
* sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE):
New.
[HAVE_TUNABLES] Include <unistd.h>.
[HAVE_TUNABLES] Include <elf/dl-tunables.h>.
[HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise.
[HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set
IFUNC selection, data cache size, shared cache size and non
temporal threshold.
* sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size,
shared_cache_size and non_temporal_threshold.
This patch makes configure require GCC 4.9 or later for building
glibc, and documents that requirement. Requiring GCC 4.9 or later
allows use of _Generic (as in tzcode). It would allow <stdatomic.h>
and _Atomic to be used as well if desired, although we need to avoid
any libatomic dependencies on any platforms. This patch is explicitly
the minimum to implement a new version requirement, with any
consequent cleanups of conditional code (not in installed headers or
files shared with gnulib etc.) to be done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 4.9 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.9 or later.
* INSTALL: Regenerated.
The Summary is now generated from @standards, and syntax-checking is
performed. If invalid @standards syntax is detected, summary.pl will
fail, reporting all errors. Failure and error reporting is disabled
for now, however, since much of the manual is still incomplete
wrt. header and standards annotations.
Note that the sorting order of the Summary has changed; summary.pl
respects the locale, like summary.awk did, but the use of LC_ALL=C is
introduced in the Makefile. Other notable deviations are improved
detection of the annotated elements' names, which are used for
sorting, and improved detection of the @node used to reference into
the manual. The most noticeable difference in the rendered Summary is
that entries may now contain multiple lines, one for each header and
standard combination.
summary.pl accepts a `--help' option, which details the expected
syntax of @standards. If errors are reported, the user is directed to
this feature for further information.
* manual/Makefile: Generate summary.texi with summary.pl.
Force use of the C locale. Update Perl dependency comment.
* manual/header.texi: Update reference to summary.awk.
* manual/macros.texi: Refer authors to `summary.pl --help'.
* manual/summary.awk: Remove file.
* manual/summary.pl: New file. Generate summary.texi, and
check for @standards-related syntax errors.
* manual/argp.texi: Convert header and standards @comments to
@standards.
* manual/arith.texi: Likewise.
* manual/charset.texi: Likewise.
* manual/conf.texi: Likewise.
* manual/creature.texi: Likewise.
* manual/crypt.texi: Likewise.
* manual/ctype.texi: Likewise.
* manual/debug.texi: Likewise.
* manual/errno.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/getopt.texi: Likewise.
* manual/job.texi: Likewise.
* manual/lang.texi: Likewise.
* manual/llio.texi: Likewise.
* manual/locale.texi: Likewise.
* manual/math.texi: Likewise.
* manual/memory.texi: Likewise.
* manual/message.texi: Likewise.
* manual/pattern.texi: Likewise.
* manual/pipe.texi: Likewise.
* manual/process.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/search.texi: Likewise.
* manual/setjmp.texi: Likewise.
* manual/signal.texi: Likewise.
* manual/socket.texi: Likewise.
* manual/startup.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/string.texi: Likewise.
* manual/sysinfo.texi: Likewise.
* manual/syslog.texi: Likewise.
* manual/terminal.texi: Likewise.
* manual/threads.texi: Likewise.
* manual/time.texi: Likewise.
* manual/users.texi: Likewise.
Header and standards annotations are slated for standardization,
including being rendered in the description of functions, variables,
etc. (elements), and eventually required. This commit adds @standards
dummy macros so we can convert all existing annotations to the new
framework while maintaining the rendered status quo.
There needs to be a way to disambiguate annotations in lists of @*x
elements, where a common description is shared but some elements may
have different headers or standards. The @standardsx macro fills this
role by accepting an additional parameter: the name of the annotated
element.
* manual/macros.texi (@standards): New macro. Provide
placeholder for header and standards annotations.
(@standardsx): New macro. Likewise, for lists of @*x
elements.
All of the major architectures are adopting tunables as a way to add
tuning to the library, from hwcap_mask for aarch64 to HLE for s390 and
ifunc and cache geometry for x86. Given this adoption and the fact
that we don't want additional tuning knobs to be added outside of
tunables, it makes sense to enable tunables by default using this
trivial patch.
Smoke tested on x86 to ensure that tunables code was built without
specifying it as a configure flag. I have kept it as --enabled and
not changed it to --disable since we want to still keep the option of
different kinds of front-ends for tunables.
* configure.ac(--enable-tunables): Enable by default.
* configure: Regenerate.
* NEWS: Mention change.
* manual/install.texi (enable-tunables): Adjust documentation.
* INSTALL: Regenerate.
* manual/math.texi (Mathematics): Add description for _FloatN and
_FloatNx types and mentions that they are not support in glibc for
any architecture, so far.
* manual/arith.texi (wcstof, wcstold): Replace the mention to
stdlib.h with wchar.h.
(Parsing of Floats): Add descriptions for strtofN and wcstofN.
(Printing of Floats): Add description for strfromfN.
Add LD_HWCAP_MASK to tunables in preparation of it being removed from
rtld.c. This allows us to read LD_HWCAP_MASK much earlier so that it
can influence IFUNC resolution in aarch64.
This patch does not actually do anything other than read the
LD_HWCAP_MASK variable and add the tunables way to set the
LD_HWCAP_MASK, i.e. via the glibc.tune.hwcap_mask tunable. In a
follow-up patch, the _dl_hwcap_mask will be replaced with
glibc.tune.hwcap_mask to complete the transition.
* elf/dl-tunables.list: Add glibc.tune.hwcap_mask.
* scripts/gen-tunables.awk: Include dl-procinfo.h.
* manual/tunables.texi: Document glibc.tune.hwcap_mask.
The @errno macro is extended to render the canonical error string in
every documented errno error. Redundant entries and "???" are
removed. Sixty-six errors now at least contain the error string as
the description, where no description (or "???") existed before.
* manual/errno.texi: Remove redundant error strings.
* manual/macros.texi (@errno): Render the error string in
every description.
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
As described in BZ#21398 (close as dup of 21393) report current
freopen implementation fails when one tries to freopen STDIN_FILENO,
STDOUT_FILENO, or STDERR_FILENO. Although on bug report the
discussion leads to argue if a close followed by a freopen on the
standard file is a valid operation, the underlying issue is not
really the check for dup3 returned value, but rather calling it
if the returned file descriptor is equal as the input one.
So for a quality of implementation this patch avoid calling dup3
for the aforementioned case. It also adds a dup3 error case check
for the two possible failures, with one being Linux only: EINTR and
EBUSY. The EBUSY issue is better explained on this stackoverflow
thread [1], but in a short it is due the internal Linux
implementation which allows a race condition window for dup2 due
the logic dissociation of file descriptor allocation and actual
VFS 'install' operation. For both outliers failures all allocated
memory is freed and a NULL FILE* is returned.
With this patch the example on BZ#21398 is now actually possible
(I used as the testcase for the bug report). Checked on
x86_64-linux-gnu.
[BZ #21393]
* libio/freopen.c (freopen): Avoid dup already opened file descriptor
and add a check for dup3 failure.
* libio/freopen64.c (freopen64): Likewise.
* libio/tst-freopen.c (do_test): Rename to do_test_basic and use
libsupport.
(do_test_bz21398): New test.
* manual/stdio.texi (freopen): Add documentation of EBUSY failure.
[1] http://stackoverflow.com/questions/23440216/race-condition-when-using-dup2
errno.texi documents error macros, their values, and error strings in
Texinfo @comments, some of which are also used for @standards. The
purpose of this commit is to separate the standards from the error
strings so that both the @standards conversion script picks up clean
@standards and the errno documentation framework is improved.
The error names, values, and messages are consolidated in a new custom
macro, @errno. It is not clear that scripts within the sources rely
on the special Texinfo @comment-based format to generate files used
throughout the library, so the definition of @errno in macros.texi now
provides a comment indicating the dependency. The dependent scripts
are updated to use @errno, which also simplifies them a bit. The
files those scripts generate were verified to be unchanged.
The @errno macro is not visibly rendered in any way at this time, but
it does use an @cindex command to add the error string to the Concept
Index, to facilitate searching on error messages.
* manual/errno.texi: Convert @comment-based errno
documentation to @errno.
* manual/macros.texi (@errno): New macro. Consolidate errors,
their values, and messages, adding the error string to the
Concept Index. Provide a warning in the comment about
external (to the manual) dependencies.
* sysdeps/gnu/errlist.awk: Use @errno instead of @comments.
* sysdeps/mach/hurd/errnos.awk: Likewise.
The conversion script will convert these annotations, but the
replacement Summary-generation script won't catch them because @items
in @tables are not generally considered annotatable, causing them to
be skipped over (or cause errors). Using @vtable ensures their
continued presence in the Summary, with the added benefit that Texinfo
will also automatically include them in the Variable and Constant
Macro index now.
* manual/conf.texi: Convert @tables of annotated @items to
@vtables.
* manual/lang.texi: Likewise.
* manual/pattern.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/socket.texi: Likewise.
This commit handles exceptional cases of invalid syntax for the
@standards conversion script.
* manual/crypt.texi: Move a comment out of an @*x list.
* manual/filesys.texi: Refactor some comments, one of which
looks like a standard. Fix incorrectly separated standards.
* manual/locale.texi: Invert an annotation.
* manual/resource.texi: Fix incorrectly separated standards.
* manual/time.texi: Refactor a @vtable that obscures an
annotation.
* manual/users.texi: Refactor multiple headers to occupy a
single @comment.
This macro is defined by TS 18661-3 for supporting the _FloatN and
_FloatNx types, as well as the functions suffixed with fN.
* bits/libc-header-start.h:
(__GLIBC_USE_IEC_60559_TYPES_EXT): New macro.
* include/features.h: Describe __STDC_WANT_IEC_60559_TYPES_EXT__.
* manual/creature.texi: Likewise.
Simplify the Linux accept4 implementation based on the assumption
that it is available in some way. __ASSUME_ACCEPT4_SOCKETCALL was
previously unused, so remove it.
For ia64, the accept4 system call (and socket call) were backported
in kernel version 3.2.18. Reflect this in the installation
instructions.
They only modify the state in the dirstream argument, and we
generally do not treat this as a reason to mark a function as
not thread-safe. For an example, see random_r, which is marked
as thread-safe even though the random state is not protected
by a lock.
glibc's implementation of getopt includes code to parse an environment
variable named _XXX_GNU_nonoption_argv_flags_ (where XXX is the
current process's PID in decimal); but all of it has been #ifdefed out
since 2001, with no official way to turn it back on.
According to commentary in our config.h.in, bash version 2.0 set this
environment variable to indicate argv elements that were the result of
glob expansion and therefore should not be treated as options, but the
feature was "disabled later" because "it caused problems". According
to bash's CHANGES file, "later" was release 2.01; it gives no more
detail about what the problems were.
Version 2.0 of bash was released on the last day of 1996, and version
2.01 in June of 1997. Twenty years later, I think it is safe to
assume that this environment variable isn't coming back.
* config.h.in (USE_NONOPTION_FLAGS): Remove.
* csu/init-first.c: Remove all #ifdef USE_NONOPTION_FLAGS blocks.
* sysdeps/mach/hurd/i386/init-first.c: Likewise.
* posix/getopt_int.h: Likewise.
* posix/getopt.c: Likewise. Also remove SWAP_FLAGS and the
__libc_argc and __libc_argv externs, which were only used by
#ifdef USE_NONOPTION_FLAGS blocks.
* posix/getopt_init.c: Remove file.
* posix/Makefile (routines): Remove getopt_init.
* include/getopt.h: Don't declare __getopt_initialize_environment.
* manual/getopt.texi: Remove mention of USE_NONOPTION_FLAGS in
a comment.
manual/libm-err-tab.pl contains a hardcoded list of libm functions for
which ulps are listed in the manual, and another hardcoded list in a
comment of functions deliberately excluded because of an expected lack
of ulps (and the two together are not in fact an exhaustive list of
libm functions tested through the libm-test machinery).
This patch removes these hardcoded lists, so eliminating this from the
places needing updating when a new libm function is added. Instead,
ulps are tabulated for functions for which they are seen in
libm-test-ulps files, in alphabetical order. The pseudo-function
names such as *_downward and *_vlen* are excluded since they are
excluded from the existing lists, and the description in the manual is
updated to explain how those entries are excluded and if a function is
not listed at all it does not have known errors.
Tested for x86_64.
* manual/libm-err-tab.pl (@all_functions): Change to
%all_functions. Initialize as empty.
(parse_ulps): Add to %all_functions based on functions found in
ulps files. Ignore results for non-default rounding modes and
vector functions.
(print_platforms): Use %all_platforms.
* manual/math.texi (Errors in Math Functions): Document omissions
from the table.
Create a new node for tunables documentation and add notes for the
malloc tunables.
* manual/tunables.texi: New chapter.
* manual/Makefile (chapters): Add it.
* manual/probes.texi (@node): Point to the Tunables chapter.
