As for gettimeofday, time will be implemented based on clock_gettime
on all platforms and internal code should use clock_gettime
directly. In addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot
fail, using the same rationale for gettimeofday change. And internal
helper was added (time_now).
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Change the default implementation of time to call clock_gettime,
to align with new Linux ports that are expected to only implement
__NR_clock_gettime. Arch-specific implementation that either call
the time vDSO or route to gettimeofday vDSO are not removed.
Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic
CLOCK_REALTIME clockid. This takes less CPU time and its behavior
better matches what the current glibc does.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement stime,
not settimeofday or a direct syscall. Then convert stime into a
compatibility symbol and remove its prototype from time.h.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
Building the test cases in parallel might make tst-strftime2 and
tst-strftime3 fail. Simply re-running the test case (or building
serially) makes the problem go away. This patch adds the necessary
dependency to allow parallel builds in the time subdirectory.
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
If we are running on a 32-bit system with a 64-bit time_t we need to
ensure there is padding around the tv_nsec variable. This is requried as
the timespec is #defined to the __timespec64 struct.
* time/bits/types/struct_timespec.h: Add padding for the timespec if
required.
It moves the missing CFLAGS from rt/Makefile to time/Makefile missing
from 7b5af2d8f2 (Finish move of clock_* functions to libc. [BZ #24959]).
Checked on powerpc64le-linux-gnu.
* rt/Makefile (CFLAGS-clock_nanosleep.c): Move to ...
* time/Makefile (CFLAGS-clock_nanosleep.c): ... here.
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
Keep these functions compatible with Gnulib while adding
__time64_t support. The basic idea is to move private API
declarations from include/time.h to time/mktime-internal.h, since
the former file cannot easily be shared with Gnulib whereas the
latter can.
Also, do some other minor cleanup while in the neighborhood.
* include/time.h: Include stdbool.h, time/mktime-internal.h.
(__mktime_internal): Move this prototype to time/mktime-internal.h,
since Gnulib needs it.
(__localtime64_r, __gmtime64_r) [__TIMESIZE == 64]:
Move these macros to time/mktime-internal.h, since Gnulib needs them.
(__mktime64, __timegm64) [__TIMESIZE != 64]: New prototypes.
(in_time_t_range): New static function.
* posix/bits/types.h (__time64_t) [__TIMESIZE == 64 && !defined __LIBC]:
Do not define as a macro in this case, so that portable code is
less tempted to use __time64_t.
* time/mktime-internal.h: Rewrite so that it does both glibc
and Gnulib work. Include time.h if not _LIBC.
(mktime_offset_t) [!_LIBC]: Define for gnulib.
(__time64_t, __gmtime64_r, __localtime64_r, __mktime64, __timegm64)
[!_LIBC || __TIMESIZE == 64]: New macros, mostly moved here
from include/time.h.
(__gmtime_r, __localtime_r, __mktime_internal) [!_LIBC]:
New macros, taken from GNulib.
(__mktime_internal): New prototype, moved here from include/time.h.
* time/mktime.c (mktime_min, mktime_max, convert_time)
(ranged_convert, __mktime_internal, __mktime64):
* time/timegm.c (__timegm64):
Use __time64_t, not time_t.
* time/mktime.c: Stop worrying about whether time_t is floating-point.
(__mktime64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from mktime.
(mktime) [_LIBC && __TIMESIZE != 64]: New function.
* time/timegm.c [!_LIBC]: Include libc-config.h, not config.h,
for libc_hidden_def.
Include errno.h.
(__timegm64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from timegm.
(timegm) [_LIBC && __TIMESIZE != 64]: New function.
First cut at publicizing __time64_t
snprintf will only truncate the output if the data its given
is corrupted, but a truncated buffer will not match the
"pristine" data's buffer, which is all we need. So just
disable the warning via the DIAG macros.
The Japanese era name will be changed on May 1, 2019. The Japanese
government made a preliminary announcement on April 1, 2019.
The glibc ja_JP locale must be updated to include the new era name for
strftime's alternative year format support.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #22964]
* localedata/locales/ja_JP (LC_TIME): Add entry for the new Japanese
era.
* time/tst-strftime2.c (dates): Add 2019-04-30 and 2019-05-01.
(mkreftable): Add rules for the new Japanese era and the new dates.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #24293]
* time/Makefile (LOCALES): Add zh_TW.UTF-8, cmn_TW.UTF-8,
hak_TW.UTF-8, nan_TW.UTF-8, and lzh_TW.UTF-8.
* time/tst-strftime2.c (locales): Likewise.
(dates): Add 1910-04-01, 1911-12-31, 1912-01-01, 1913-04-01,
2010-04-01, and 2011-04-01.
(mkreftable): Add rules for the new locales and the new dates.
Express the years as full Gregorian years (e.g., 1988 instead of 88)
and months with natural numbers (1-12 rather than 0-11).
Compare actual dates rather than indexes when selecting the era name.
Declare the local variable era as a string character pointer rather
than an array of chars where the actual string is copied which might
lead to potential buffer overflows in future.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* time/tst-strftime2.c (date_t): Explicitly define the type.
(dates): Use natural month and year numbers to express a date.
(is_before): New function to compare dates.
(mkreftable): Minor improvements to simplify maintenance.
(do_test): Reflect the changes in dates array.
Test the transition points between all the currently listed Japanese
era name changes. This includes testing the transition between the
first year date and the second year date. This test will help test
the upcoming Japanese era name change.
Also fixes a fencepost error where the era name isn't properly parsed
by strptime in the last (partial) year of the era.
Example: if an era change happens in Feb 1990, and again in Aug 1995,
that's 5.5 years long, but the 0.5 year wasn't accounted for.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Having checked the arrangement of whitespace in time/strftime_l.c
using "unexpand" and "unexpand -a" command, three inconsistencies are
detected. So fix them for consistency.
ChangeLog:
* time/strftime_l.c: Fix a few whitespace arrangement inconsistencies.
By ordering the suballocations by decreasing alignment, alignment
gaps can be avoided.
Also use __glibc_unlikely for reading the transitions and type
indexes. In the 8-byte case, two reads are now needed because the
transitions and type indexes are no longer adjacent. The separate
call to __fread_unlocked does not matter from a performance point of
view because __tzfile_read is only invoked rarely.
The computation of tzspec_len is moved in front of the total_size
computation, so that the allocation size computation and the
suballocations are next to each other. Also add an assert that
tzspec_len is positive when it is actually used later.
The GMT offset can be outside the range of a 16-bit int type, which
is presumably the reason why long int was used in struct tm. We
cannot change struct tm, but we can change the internal type for
the offset.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
Provide a 64-bit-time version of __difftime (but do not assume
__time64_t is a signed int so that Gnulib can reuse the code)
and make the 32-bit version a wrapper of it.
Current difftime expects two time_t arguments and returns a
double. To preserve source-code compatibility, its 64-bit-time
equivalent expects two __time64_t arguments but still returns
a double.
This patch was tested by running 'make check' on branch
master then applying this patch and its two predecessors and
running 'make check' again, and checking that both 'make check'
yield identical results. This was done on x86_64-linux-gnu and
i686-linux-gnu.
This patch was also functionally tested with an ad hoc userland
C program which checks the result of difftime for various pairs
of 32-bit and, for 64-bit builds, of 64-bit time_t values too.
The program was built and run against a glibc with and without
the patch, and the results compared to ensure the patch does
not change the behavior of difftime.
* include/time.h (__difftime64): Add.
* time/difftime.c (subtract): convert to 64-bit time.
* time/difftime.c (__difftime64): Add.
* time/difftime.c (__difftime): Wrap around __difftime64.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64_r): Add.
* time/ctime_r.c
(__ctime64_r): Add.
[__TIMESIZE != 64] (__ctime_r): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64): Add.
* time/gmtime.c
(__ctime64): Add.
[__TIMESIZE != 64] (ctime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64_r): Add.
* time/gmtime.c
(__gmtime64_r): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64): Add.
* time/gmtime.c
(__gmtime64): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64_r): Add.
* time/localtime.c
(__localtime64_r): Add.
[__TIMESIZE != 64] (__localtime_r): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64): Add.
* manual/maint.texi: Document Y2038 symbol handling.
* time/localtime.c
(__localtime64): Add.
[__TIMERSIZE != 64] (__localtime): Turn into a wrapper.
Now that __time64_t exists, we can switch internal function
__tz_convert from 32-bit to 64-bit time. This involves switching
some other internal functions as well, namely __tz_compute and
__offtime.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__tz_compute): Replace time_t with __time64_t.
(__tz_convert): Replace time_t* with __time64_t.
(__offtime): Replace time_t* with __time64_t.
* time/gmtime.c
(__gmtime_r): Adjust call to __tz_convert.
(gmtime): Likewise.
* time/localtime.c
(__localtime_r): Likewise.
(localtime): Likewise.
* time/offtime.c: Replace time_t with __time64_t.
* time/tzset.c: Likewise.
The DEBUG_MKTIME code no longer works in glibc or in Gnulib.
And it’s no longer needed now that glibc and Gnulib both have
their own testing mechanisms for mktime.
* time/mktime.c (DEBUG_MKTIME): Remove. All uses removed.
[BZ#23789]
mktime was not properly reporting failures when the underlying
localtime_r fails with errno != EOVERFLOW; it incorrectly treated
them like EOVERFLOW failures, and set errno to EOVERFLOW.
The problem could happen on non-glibc platforms, with Gnulib.
* time/mktime.c (guess_time_tm): Remove, replacing with ...
(tm_diff): ... this simpler function, which does not change errno.
All callers changed to deal with errno themselves.
(ranged_convert, __mktime_internal): Return failure immediately if
the underlying function reports any failure other than EOVERFLOW.
(__mktime_internal): Set errno to EOVERFLOW if the spring-forward
gap code fails.
[BZ#23789]
* time/mktime.c (ranged_convert): On 32-bit platforms, don’t
mishandle a DST transition that jumps over the Y2038 boundary.
No such DST transitions are known so this is only a theoretical
bug, but we might as well do things right.
[BZ#23789]
* time/mktime.c (long_int): Now 4⨯ int, not just 3⨯.
This is so that we can add tm_diff results to a previous guess,
which will be useful in a later patch.
[BZ#23789]
* time/mktime.c [!_LIBC && !DEBUG_MKTIME]:
Include libc-config.h, not config.h, for __set_errno.
(guess_time_tm, __mktime_internal): Set errno to EOVERFLOW on overflow.
glibc support for 64-bit time_t on 32-bit architectures
will involve:
- Using 64-bit times inside glibc, with conversions
to and from 32-bit times taking place as necessary
for interfaces using such times.
- Adding 64-bit-time support in the glibc public API.
This support should be dynamic, i.e. glibc should
provide both 32-bit and 64-bit implementations and
let user code choose at compile time whether to use
the 32-bit or 64-bit interfaces.
This requires a glibc-internal name for a type for times
that are always 64-bit.
Based on __TIMESIZE, a new macro is defined, __TIME64_T_TYPE,
which is always the right __*_T_TYPE to hold a 64-bit-time.
__TIME64_T_TYPE equals __TIME_T_TYPE if __TIMESIZE equals 64
and equals __SQUAD_T_TYPE otherwise.
__time64_t can then replace uses of internal_time_t.
This patch was tested by running 'make check' on branch
master then applying this patch and its predecessor and
running 'make check' again, and checking that both 'make
check' yield identical results. This was done on
x86_64-linux-gnu and i686-linux-gnu.
* bits/time64.h: New file.
* include/time.h: Replace internal_time_t with __time64_t.
* posix/bits/types (__time64_t): Add.
* stdlib/Makefile: Add bits/time64.h to includes.
* time/tzfile.c: Replace internal_time_t with __time64_t.
[BZ#23745]
This fix affects only Gnulib. Problem discovered when
mktime.c was used as part of Gnulib in bleeding-edge Coreutils.
* time/mktime.c:
(my_tzset) [!_LIBC && !NEED_MKTIME_WORKING && !NEED_MKTIME_WINDOWS]:
Do not define since it is not used. Defining an unused static
function prompts a warning from GCC when Coreutils is configured
with --enable-gcc-warnings.
[BZ #23603]
* include/time.h (__mktime_internal): The localtime offset is now
of type long int instead of time_t. This is the longstanding type
in glibc, and it is more than enough to represent difference
between localtime and gmtime even if it is 32 bits and time_t is
64. Changing it now will let us avoid an unnecessary change when
time_t is widened to 64 bits on 32-bit platforms.
* time/mktime-internal.h (mktime_offset_t): Now long int.
[BZ #23603][BZ #16346]
This fixes some obscure problems with integer overflow.
Although it looks scary, it is almost all a byte-for-byte copy
from Gnulib, and the Gnulib code has been tested reasonably well.
* include/intprops.h: New file, copied from Gnulib.
* include/verify.h, time/mktime-internal.h:
New tiny files, simplified from Gnulib.
* time/mktime.c: Copy from Gnulib. This has the following changes:
Do not include config.h if DEBUG_MKTIME is nonzero.
Include stdbool.h, intprops.h, verify.h.
Include string.h only if needed.
Include stdlib.h on MS-Windows.
Include mktime-internal.h.
(DEBUG_MKTIME): Default to 0, and simplify later uses.
(NEED_MKTIME_INTERNAL, NEED_MKTIME_WINDOWS)
(NEED_MKTIME_WORKING): Give default values to pacify -Wundef,
which glibc uses. Default NEED_MKTIME_WORKING to DEBUG_MKTIME, to
simplify later conditionals; default the others to zero. Use
these conditionals to express only the code needed on the current
platform. In uses of these conditionals, explicitly spell out how
_LIBC affects things, so it’s easier to review from a glibc
viewpoint.
(WRAPV): Remove; no longer needed now that we have
systematic overflow checking.
(my_tzset, __tzset) [!_LIBC]: New function and macro, to better
compartmentalize tzset issues. Move system-dependent tzsettish
code here from mktime.
(verify): Remove; now done by verify.h. All uses changed.
(long_int): Use a more-conservative definition, to avoid
integer overflow.
(SHR): Remove, replacing with ...
(shr): New function, which means we needn’t worry about side
effects in args, and conversion analysis is simpler.
(TYPE_IS_INTEGER, TYPE_TWOS_COMPLEMENT, TYPE_SIGNED, TYPE_MINIMUM)
(TYPE_MAXIMUM, TIME_T_MIN, TIME_T_MAX, TIME_T_MIDPOINT)
(time_t_avg, time_t_add_ok): Remove.
(mktime_min, mktime_max): New constants.
(leapyear, isdst_differ): Use bool for booleans.
(ydhms_diff, guess_time_tm, ranged_convert, __mktime_internal):
Use long_int, not time_t, for mktime differences.
(long_int_avg): New function, replacing time_t_avg.
INT_ADD_WRAPV replaces time_t_add_ok.
(guess_time_tm): 6th arg is now long_int, not time_t const *.
All uses changed.
(convert_time): New function.
(ranged_convert): Use it.
(__mktime_internal): Last arg now points to mktime_offset_t, not
time_t. All uses changed. This is a no-op on glibc, where
mktime_offset_t is always time_t. Use int, not time_t, for UTC
offset guess. Directly check for integer overflow instead of
using a heuristic that works only 99.9...% of the time.
Access *OFFSET only once, to avoid an unlikely race if the
compiler delays a load and if this cascades into a signed integer
overflow.
(mktime): Move tzsettish code to my_tzset, and move
localtime_offset to within mktime so that it doesn’t
need a separate ifdef.
(main) [DEBUG_MKTIME]: Speed up by using localtime_r
instead of localtime.
* time/timegm.c: Copy from Gnulib. This has the following changes:
Include mktime-internal.h.
[!_LIBC]: Include config.h and time.h. Do not include
timegm.h or time_r.h. Make __mktime_internal a macro,
and include mktime-internal.h to get its declaration.
(timegm): Temporary is now mktime_offset_t, not time_t.
This affects only Gnulib.
After commit d76d370355 ("Fix missing
timespec definition for sys/stat.h (BZ #21371)") in combination with
kernel UAPI changes, GCC sanitizer builds start to fail due to a
conflicting definition of struct timespec in <linux/time.h>. Use
_STRUCT_TIMESPEC as the header file inclusion guard, which is already
checked in the kernel header, to support including <linux/time.h> and
<sys/stat.h> in the same translation unit.
Bug 22639 reports localtime failing to handle time offset transitions
correctly in 2039 and later on platforms with 64-bit time_t.
The problem is the use of SECSPERDAY (constant 86400) in calculations
such as
t = ((year - 1970) * 365
+ /* Compute the number of leapdays between 1970 and YEAR
(exclusive). There is a leapday every 4th year ... */
+ ((year - 1) / 4 - 1970 / 4)
/* ... except every 100th year ... */
- ((year - 1) / 100 - 1970 / 100)
/* ... but still every 400th year. */
+ ((year - 1) / 400 - 1970 / 400)) * SECSPERDAY;
where t is of type time_t and year is of type int. Before my commit
92bd70fb85 (an update from tzcode,
included in 2.26 and later releases), SECSPERDAY was obtained from a
file imported from tzcode, where the value included a cast to
int_fast32_t. On 64-bit platforms, glibc defines int_fast32_t to be
long int, so 64-bit, but my patch resulted in it changing to int.
(The bug would probably have existed even before my patch for x32,
which has 64-bit time_t but 32-bit int_fast32_t, but I haven't
verified that.)
This patch fixes the problem by including a cast to time_t in the
definition of SECSPERDAY. (64-bit time support for 32-bit systems
should move such code that isn't a public interface to using the
internal 64-bit version of time_t throughout.)
Tested for x86_64 and x86.
[BZ #22639]
* time/tzset.c (SECSPERDAY): Cast to time_t.
* time/tst-y2039.c: New file.
* time/Makefile (tests): Add tst-y2039.
Continuing the fixes for linknamespace and localplt test failures with
-Os that arise from functions not being inlined in that case, this
patch fixes such failures for getc_unlocked.
__getc_unlocked already exists; this patch makes it explicitly hidden,
calls it where needed for namespace reasons, adds an inline function
for it when inline functions are used and adds libc_hidden_proto /
libc_hidden_weak for getc_unlocked.
Tested for x86_64 (both without -Os to make sure that case continues
to work, and with -Os to make sure all the relevant linknamespace and
localplt test failures are resolved). Because of other such failures
that remain after this patch, neither of the bugs can yet be closed.
[BZ #15105]
[BZ #19463]
* libio/getc_u.c (getc_unlocked): Use libc_hidden_weak.
* include/stdio.h [!_ISOMAC] (__getc_unlocked): Use
attribute_hidden, and define inline if [__USE_EXTERN_INLINES].
[!_ISOMAC] (getc_unlocked): Use libc_hidden_proto.
* misc/getttyent.c (__getttyent): Call __getc_unlocked instead of
getc_unlocked.
* time/tzfile.c (__tzfile_read): Likewise.
Continuing the fixes for linknamespace and localplt test failures with
-Os that arise from functions not being inlined in that case, this
patch fixes such failures for ferror_unlocked.
The usual approach is followed of adding __ferror_unlocked (inlined
when ferror_unlocked is), making calls use it when required for
namespace reasons (only one such call), and using libc_hidden_proto /
libc_hidden_weak for the ferror_unlocked weak alias when only localplt
but not namespace issues are involved.
Tested for x86_64 (both without -Os to make sure that case continues
to work, and with -Os to make sure all the relevant linknamespace and
localplt test failures are resolved). Because of other such failures
that remain after this patch, neither of the bugs can yet be closed.
[BZ #15105]
[BZ #19463]
* libio/ferror_u.c (ferror_unlocked): Rename to __ferror_unlocked
and define as weak alias of __ferror_unlocked. Use
libc_hidden_weak.
* include/stdio.h [!_ISOMAC] (ferror_unlocked): Use
libc_hidden_proto.
[!_ISOMAC] (__ferror_unlocked) New declaration, and inline
function if [__USE_EXTERN_INLINES].
* time/getdate.c (__getdate_r): Call __ferror_unlocked instead of
ferror_unlocked.
Continuing the fixes for linknamespace and localplt test failures with
-Os that arise from functions not being inlined in that case, this
patch fixes such failures for feof_unlocked.
The usual approach is followed of adding __feof_unlocked (inlined when
feof_unlocked is), making calls use it when required for namespace
reasons, and using libc_hidden_proto / libc_hidden_weak for the
feof_unlocked weak alias when only localplt but not namespace issues
are involved. In the case of getaddrinfo.c, use of __feof_unlocked
needs to be conditional since that code is also used in nscd (where
__feof_unlocked is not available).
Tested for x86_64 (both without -Os to make sure that case continues
to work, and with -Os to make sure all the relevant linknamespace and
localplt test failures are resolved). Because of other such failures
that remain after this patch, neither of the bugs can yet be closed.
[BZ #15105]
[BZ #19463]
* libio/feof_u.c (feof_unlocked): Rename to __feof_unlocked and
define as weak alias of __feof_unlocked. Use libc_hidden_weak.
* include/stdio.h (feof_unlocked): Use libc_hidden_proto.
(__feof_unlocked): New declaration, and inline function if
[__USE_EXTERN_INLINES].
* iconv/gconv_conf.c (read_conf_file): Call __feof_unlocked
instead of feof_unlocked.
* intl/localealias.c [_LIBC] (FEOF): Likewise.
* nss/nsswitch.c (nss_parse_file): Likewise.
* sysdeps/unix/sysv/linux/readonly-area.c (__readonly_area):
Likewise.
* time/getdate.c (__getdate_r): Likewise.
* sysdeps/posix/getaddrinfo.c [IS_IN (libc)] (feof_unlocked):
Define as macro to call __feof_unlocked.
[BZ #10871]
* localedata/locales/ru_RU (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Import from CLDR (genitive case).
(abmon): Copy from the old content except the 5th month which is
now in the genitive case, even when abbreviated.
* localedata/locales/ru_UA: Likewise.
* time/tst-strptime.c (day_tests): Add an actual example of
a difference between %b and %Ob in Russian.
[BZ #10871]
* localedata/locales/pl_PL: Alternative month names added,
primary month names are genitive now.
* time/tst-strptime.c (day_tests): Actually use a genitive case
of a month name in Polish language.
All the previous changes also repeated to support abbreviated
alternative month names. In most languages which have declension and
need nominative/genitive month names the abbreviated forms for both
cases are the same. An example where they do differ is May in Russian:
this name is too short to be abbreviated so even the abbreviated form
features the declension suffixes.
[BZ #10871]
* locale/C-time.c (_nl_C_LC_TIME): Add abbreviated alternative month
names, define them as the same as abbreviated month names explicitly.
* locale/categories.def (LC_TIME): Add ab_alt_mon and wide-ab_alt_mon.
* locale/langinfo.h: (_NL_ABALTMON_1, _NL_ABALTMON_2, _NL_ABALTMON_3,
_NL_ABALTMON_4, _NL_ABALTMON_5, _NL_ABALTMON_6, _NL_ABALTMON_7,
_NL_ABALTMON_8, _NL_ABALTMON_9, _NL_ABALTMON_10, _NL_ABALTMON_11,
_NL_ABALTMON_12, _NL_WABALTMON_1, _NL_WABALTMON_2, _NL_WABALTMON_3,
_NL_WABALTMON_4, _NL_WABALTMON_5, _NL_WABALTMON_6, _NL_WABALTMON_7,
_NL_WABALTMON_8, _NL_WABALTMON_9, _NL_WABALTMON_10, _NL_WABALTMON_11,
_NL_WABALTMON_12): New enum constants.
* locale/programs/ld-time.c (struct locale_time_t): Add ab_alt_mon,
wab_alt_mon, and ab_alt_mon_defined members.
(time_output): Output ab_alt_mon and wab_alt_mon members.
(time_read): Read them, initialize them as copies of abmon and wabmon
respectively if they are missing, initialize ab_alt_mon_defined.
* locale/programs/locfile-kw.gperf (ab_alt_mon): Define.
* locale/programs/locfile-kw.h: Regenerate.
* locale/programs/locfile-token.h (tok_ab_alt_mon): New enum constant.
* time/Makefile [$(run-built-tests) = yes] (LOCALES): Add es_ES.UTF-8
and ru_RU.UTF-8.
* time/strftime_l.c (a_altmonth, aam_len): New macros.
[!COMPILE_WIDE] (ABALTMON_1): New macro.
(__strftime_internal): Handle %Ob and %Oh formats.
* time/strptime_l.c [_LIBC] (ab_alt_month_name): New macro.
(__strptime_internal): Handle %Ob and %Oh formats.
* time/tst-strptime.c (day_tests): Add more tests to parse different
forms of month names including the new %Ob format specifier.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some languages (Slavic, Baltic, etc.) require a genitive case of the
month name when formatting a full date (with the day number) while
they require a nominative case when referring to the month standalone.
This requirement cannot be fulfilled without providing two forms for
each month name. From now it is specified that nl_langinfo(MON_1)
series (up to MON_12) and strftime("%B") generate the month names in
the grammatical form used when the month is a part of a complete date.
If the grammatical form used when the month is named by itself is needed,
the new values nl_langinfo(ALTMON_1) (up to ALTMON_12) and
strftime("%OB") are supported. This new feature is optional so the
languages which do not need it or do not yet provide the updated
locales simply do not use it and their behaviour is unchanged.
[BZ #10871]
* locale/C-time.c (_nl_C_LC_TIME): Add alternative month names,
define them as the same as primary full month names explicitly.
* locale/categories.def (LC_TIME): Add alt_mon and wide-alt_mon.
* locale/langinfo.h (__ALTMON_1, __ALTMON_2, __ALTMON_3, __ALTMON_4,
__ALTMON_5, __ALTMON_6, __ALTMON_7, __ALTMON_8, __ALTMON_9, __ALTMON_10,
__ALTMON_11, __ALTMON_12, _NL_WALTMON_1, _NL_WALTMON_2, _NL_WALTMON_3,
_NL_WALTMON_4, _NL_WALTMON_5, _NL_WALTMON_6, _NL_WALTMON_7,
_NL_WALTMON_8, _NL_WALTMON_9, _NL_WALTMON_10, _NL_WALTMON_11,
_NL_WALTMON_12): New enum constants.
[__USE_GNU] (ALTMON_1, ALTMON_2, ALTMON_3, ALTMON_4, ALTMON_5, ALTMON_6,
ALTMON_7, ALTMON_8, ALTMON_9, ALTMON_10, ALTMON_11, ALTMON_12): New
macros.
* locale/programs/ld-time.c (struct locale_time_t): Add alt_mon,
walt_mon, and alt_mon_defined members.
(time_output): Output alt_mon and walt_mon members.
(time_read): Read them, initialize them as copies of mon and wmon
respectively if they are missing, initialize alt_mon_defined.
* locale/programs/locfile-kw.gperf (alt_mon): Define.
* locale/programs/locfile-kw.h: Regenerate.
* locale/programs/locfile-token.h (tok_alt_mon): New enum constant.
* localedata/tst-langinfo.c (map): Add tests for the new constants
ALTMON_1 .. ALTMON_12.
* time/Makefile [$(run-built-tests) = yes] (LOCALES): Add fr_FR.UTF-8
and pl_PL.UTF-8.
* time/strftime_l.c (f_altmonth): New macro.
(__strftime_internal): Handle %OB format.
* time/strptime_l.c [_LIBC] (alt_month_name): New macro.
(__strptime_internal): Handle %OB format.
* time/tst-strptime.c (day_tests): Add tests to parse different forms
of month names including the new %OB format specifier.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Building with current GCC mainline fails with:
strftime_l.c: In function '__strftime_internal':
strftime_l.c:719:4: error: macro expands to multiple statements [-Werror=multistatement-macros]
digits = d > width ? d : width; \
^
strftime_l.c:1260:6: note: in expansion of macro 'DO_NUMBER'
DO_NUMBER (1, tp->tm_year + TM_YEAR_BASE);
^~~~~~~~~
strftime_l.c:1259:4: note: some parts of macro expansion are not guarded by this 'else' clause
else
^~~~
In fact this particular instance is harmless; the code looks like:
if (modifier == L_('O'))
goto bad_format;
else
DO_NUMBER (1, tp->tm_year + TM_YEAR_BASE);
and because of the goto, it doesn't matter that part of the expansion
isn't under the "else" conditional. But it's also clearly bad style
to rely on that. This patch changes DO_NUMBER and DO_NUMBER_SPACEPAD
to use do { } while (0) to avoid such problems.
Tested (full testsuite) for x86_64 (GCC 6), and with
build-many-glibcs.py with GCC mainline, in conjunction with my libgcc
patch <https://gcc.gnu.org/ml/gcc-patches/2017-06/msg02032.html>.
* time/strftime_l.c (DO_NUMBER): Define using do { } while (0).
(DO_NUMBER_SPACEPAD): Likewise.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
This patch updates files coming from tzcode to the versions in tzcode
2017b. A couple of changes to other glibc code are needed.
time/tzset.c was using the SECSPERDAY macro from tzfile.h, which no
longer defines that macro, so a local definition is added to tzset.c.
Because timezone/private.h now defines the _ macro whenever
HAVE_GETTEXT is true, even if it was previously defined, it is also
necessary to avoid a conflict with the definition in
include/libintl.h. Defining _ISOMAC is the obvious way to avoid such
internal definitions being visible, together with defining TZ_DOMAIN
so that zic and zdump continue to get the messages from the libc
domain as desired. However, zic and zdump rely on PKGVERSION and
REPORT_BUGS_TO from config.h, which is not included by default with
_ISOMAC, so -include config.h needs adding to the options for these
programs as well. Together those changes allow unmodified tzcode
2017b sources to work in glibc.
Tested for x86_64.
* timezone/private.h: Update from tzcode 2017b.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
* timezone/Makefile (tz-cflags): Add -D_ISOMAC
-DTZ_DOMAIN='"libc"' -include $(common-objpfx)config.h.
* time/tzset.c (SECSPERDAY): New macro.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.
As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000. I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.
The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed. The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
(__END_NAMESPACE_STD): Likewise.
(__USING_NAMESPACE_STD): Likewise.
(__BEGIN_NAMESPACE_C99): Likewise.
(__END_NAMESPACE_C99): Likewise.
(__USING_NAMESPACE_C99): Likewise.
* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
undefine macro.
(_Mdouble_END_NAMESPACE): Likewise.
* ctype/ctype.h: Do not handle C++ namespaces.
* libio/bits/stdio-ldbl.h: Likewise.
* libio/stdio.h: Likewise.
* locale/locale.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* setjmp/setjmp.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/bits/stdlib-float.h: Likewise.
* stdlib/bits/stdlib-ldbl.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/string.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* time/bits/types/clock_t.h: Likewise.
* time/bits/types/struct_tm.h: Likewise.
* time/bits/types/time_t.h: Likewise.
* time/time.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* wcsmbs/uchar.h: Likewise.
* wcsmbs/wchar.h: Likewise.
[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
* wctype/wctype.h: Do not handle C++ namespaces.
* scripts/begin-end-check.pl: Remove.
* Makefile (installed-headers): Likewise.
(tests-special): Do not add $(objpfx)begin-end-check.out.
($(objpfx)begin-end-check.out): Remove.
Quite a few tests include libc-internal.h just for the DIAG_* macros.
Split those macros to their own file, which can be included safely in
_ISOMAC mode. I also moved ignore_value, since it seems logically
related, even though I didn't notice any tests needing it.
Also add -Wnonnull suppressions to two tests that _should_ have them,
but the error is masked when compiling against internal headers.
* include/libc-diag.h: New file. Define ignore_value,
DIAG_PUSH_NEEDS_COMMENT, DIAG_POP_NEEDS_COMMENT,
DIAG_IGNORE_NEEDS_COMMENT, and DIAG_IGNORE_Os_NEEDS_COMMENT here.
* include/libc-internal.h: Definitions of above macros moved from
here. Include libc-diag.h. Add copyright notice.
* malloc/tst-malloc.c, malloc/tst-memcheck.c, malloc/tst-realloc.c
* misc/tst-error1.c, posix/tst-dir.c, stdio-common/bug21.c
* stdio-common/scanf14.c, stdio-common/scanf4.c, stdio-common/scanf7.c
* stdio-common/test-vfprintf.c, stdio-common/tst-printf.c
* stdio-common/tst-printfsz.c, stdio-common/tst-sprintf.c
* stdio-common/tst-unlockedio.c, stdio-common/tstdiomisc.c
* stdlib/bug-getcontext.c, string/tester.c, string/tst-endian.c
* time/tst-strptime2.c, wcsmbs/tst-wcstof.c:
Include libc-diag.h instead of libc-internal.h.
* stdlib/tst-environ.c: Include libc-diag.h. Suppress -Wnonnull for
call to unsetenv (NULL).
* nptl/tst-mutex1.c: Include libc-diag.h. Suppress -Wnonnull for
call to pthread_mutexattr_destroy (NULL).
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
This patch fixes the glibc testsuite build for GCC 7
-Wformat-truncation, newly moved out of -Wformat-length and with some
further warnings that didn't previously appear. Two tests that
previously disabled -Wformat-length are changed to disable
-Wformat-truncation instead; two others are made to disable that
option as well.
Tested (compilation only) with build-many-glibcs.py for aarch64 with
GCC mainline.
* stdio-common/tst-printf.c [__GNUC_PREREQ (7, 0)]: Ignore
-Wformat-truncation instead of -Wformat-length.
* time/tst-strptime2.c (mkbuf) [__GNUC_PREREQ (7, 0)]: Likewise.
* stdio-common/tstdiomisc.c (F): Ignore -Wformat-truncation for
GCC 7.
* wcsmbs/tst-wcstof.c: Include <libc-internal.h>.
(do_test): Ignore -Wformat-truncation for GCC 7.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
Many headers are expected to expose a subset of the type definitions
in time.h. time.h has a whole bunch of messy logic for conditionally
defining some its types and structs, but, as best I can tell, this
has never worked 100%. In particular, __need_timespec is ineffective
if _TIME_H has already been defined, which means that if you compile
#include <time.h>
#include <sched.h>
with e.g. -fsyntax-only -std=c89 -Wall -Wsystem-headers, you will get
In file included from test.c:2:0:
/usr/include/sched.h:74:57: warning: "struct timespec" declared inside
parameter list will not be visible outside of this definition or declaration
extern int sched_rr_get_interval (__pid_t __pid, struct timespec *__t) __THROW;
^~~~~~~~
And if you want to _use_ sched_rr_get_interval in a TU compiled that
way, you're hosed.
This patch replaces all of that with small bits/types/TYPE.h headers
as introduced earlier. time.h and bits/time.h are now *much* simpler,
and a lot of other headers are slightly simpler.
* time/time.h, bits/time.h, sysdeps/unix/sysv/linux/bits/time.h:
Remove all logic conditional on __need macros. Move all the
conditionally defined types to their own headers...
* time/bits/types/clock_t.h: Define clock_t here.
* time/bits/types/clockid_t.h: Define clockid_t here.
* time/bits/types/struct_itimerspec.h: Define struct itimerspec here.
* time/bits/types/struct_timespec.h: Define struct timespec here.
* time/bits/types/struct_timeval.h: Define struct timeval here.
* time/bits/types/struct_tm.h: Define struct tm here.
* time/bits/types/time_t.h: Define time_t here.
* time/bits/types/timer_t.h: Define timer_t here.
* time/Makefile: Install the new headers.
* bits/resource.h, io/fcntl.h, io/sys/poll.h, io/sys/stat.h
* io/utime.h, misc/sys/select.h, posix/sched.h, posix/sys/times.h
* posix/sys/types.h, resolv/netdb.h, rt/aio.h, rt/mqueue.h
* signal/signal.h, pthread/semaphore.h, sysdeps/nptl/pthread.h
* sysdeps/unix/sysv/linux/alpha/bits/resource.h
* sysdeps/unix/sysv/linux/alpha/sys/acct.h
* sysdeps/unix/sysv/linux/bits/resource.h
* sysdeps/unix/sysv/linux/bits/timex.h
* sysdeps/unix/sysv/linux/mips/bits/resource.h
* sysdeps/unix/sysv/linux/net/ppp_defs.h
* sysdeps/unix/sysv/linux/sparc/bits/resource.h
* sysdeps/unix/sysv/linux/sys/acct.h
* sysdeps/unix/sysv/linux/sys/timerfd.h
* sysvipc/sys/msg.h, sysvipc/sys/sem.h, sysvipc/sys/shm.h
* time/sys/time.h, time/sys/timeb.h
Use the new bits/types headers.
* include/time.h: Remove __need logic.
* include/bits/time.h
* include/bits/types/clock_t.h, include/bits/types/clockid_t.h
* include/bits/types/time_t.h, include/bits/types/timer_t.h
* include/bits/types/struct_itimerspec.h
* include/bits/types/struct_timespec.h
* include/bits/types/struct_timeval.h
* include/bits/types/struct_tm.h:
New wrapper headers.
If the TZDEFRULES file was used to set the DST rules when $TZ didn't
provide any we need to make sure that the next time it is used we
recompute everything as __tzfile_default changes some setting from what is
provided by TZDEFRULES.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
In ISO 8601, +03:30 is a valid time zone. Currently, strptime() only
parses it as a 2-digit time zone an believes this is +03:00. This change
makes it accept a single colon.
strptime's %z specifier parses a string consisting of a sign ('+'
or '-'), two hours digits, and optionally two minutes digits, into a
tm.tm_gmtoff field containing the signed number of seconds the time
zone is offset from UTC time.
The time/tst-strptime2.c program passes a short list of strings through
strptime, validating that either the gmtoff value returned matches an
expected value, or that strptime returns an expected NULL for invalid
strings (for example, when the minutes portion of the string is outside
of the range 00 to 59, or the sign is missing before the hours digits).
In review of strptime fixes, Carlos O'Donell expressed a wish that
the test function iterate through the entire range of all possible
numeric strings (-9999 to +9999) which could be passed to strptime %z,
and validate the correct response.
Specifically, the test will look for a NULL response from strptime
when:
* sign ('+' or '-') is not present before the first digit (invalid
format).
* A sign and no digits are found (invalid format).
* A sign and one digit are found (invalid format).
* A sign and three digits are found (invalid format).
* A sign and four digits (-9999 to +9999) are found but the last
two digits (minutes) are in the range 60 to 99.
The test will look for a success response from strptime with
tm.tm_gmtoff matching the calculated tm_gmtoff value when:
* A sign and four digits are found (-9999 to +9999), and the last
two digits (minutes) are in the range 00 to 59.
* A sign and two digit strings are found (-99 to +99).
The test's iteration over the possible digit values results in 22223
test strings prepared, tested, and passed by strptime.
The test supports a --verbose command line option which will show
the test results of every test input, and a final summary of all
tests. Here is some sample output:
PASS: input "1113472456 1030", expected: invalid, return value NULL
PASS: input "1113472456 +", expected: invalid, return value NULL
PASS: input "1113472456 -", expected: invalid, return value NULL
PASS: input "1113472456 +0", expected: invalid, return value NULL
PASS: input "1113472456 -0", expected: invalid, return value NULL
PASS: input "1113472456 +1", expected: invalid, return value NULL
...
PASS: input "1113472456 +9", expected: invalid, return value NULL
PASS: input "1113472456 -9", expected: invalid, return value NULL
PASS: input "1113472456 +00", expected: valid, tm.tm_gmtoff 0
PASS: input "1113472456 -00", expected: valid, tm.tm_gmtoff 0
PASS: input "1113472456 +01", expected: valid, tm.tm_gmtoff 3600
PASS: input "1113472456 -01", expected: valid, tm.tm_gmtoff -3600
PASS: input "1113472456 +02", expected: valid, tm.tm_gmtoff 7200
...
PASS: input "1113472456 +99", expected: valid, tm.tm_gmtoff 356400
PASS: input "1113472456 -99", expected: valid, tm.tm_gmtoff -356400
PASS: input "1113472456 +000", expected: invalid, return value NULL
PASS: input "1113472456 -000", expected: invalid, return value NULL
PASS: input "1113472456 +001", expected: invalid, return value NULL
...
PASS: input "1113472456 +999", expected: invalid, return value NULL
PASS: input "1113472456 -999", expected: invalid, return value NULL
PASS: input "1113472456 +0000", expected: valid, tm.tm_gmtoff 0
PASS: input "1113472456 -0000", expected: valid, tm.tm_gmtoff 0
PASS: input "1113472456 +0001", expected: valid, tm.tm_gmtoff 60
PASS: input "1113472456 -0001", expected: valid, tm.tm_gmtoff -60
...
PASS: input "1113472456 +0059", expected: valid, tm.tm_gmtoff 3540
PASS: input "1113472456 -0059", expected: valid, tm.tm_gmtoff -3540
PASS: input "1113472456 +0060", expected: invalid, return value NULL
PASS: input "1113472456 -0060", expected: invalid, return value NULL
...
PASS: input "1113472456 +0099", expected: invalid, return value NULL
PASS: input "1113472456 -0099", expected: invalid, return value NULL
PASS: input "1113472456 +0100", expected: valid, tm.tm_gmtoff 3600
PASS: input "1113472456 -0100", expected: valid, tm.tm_gmtoff -3600
PASS: input "1113472456 +0101", expected: valid, tm.tm_gmtoff 3660
...
PASS: input "1113472456 +9999", expected: invalid, return value NULL
PASS: input "1113472456 -9999", expected: invalid, return value NULL
PASS: 22223 input strings: 0 fail, 22223 pass
Any failing test will result in printing the failed line to stdout, and
will trigger the printing of the summary line at the of all tests. For
example:
FAIL: input "1113472456 1030", expected: invalid, return value NULL,
got: valid, tm.tm_gmtoff 37800
FAIL: 22223 input strings: 1 fail, 22222 pass
