2002-10-08 Richard Henderson <rth@redhat.com>
* soft-fp/op-4.h: Handle carry correctly in
__FP_FRAC_ADD_3, __FP_FRAC_ADD_4, __FP_FRAC_SUB_3,
__FP_FRAC_SUB_4, __FP_FRAC_DEC_3, __FP_FRAC_DEC_4.
* soft-fp/op-common.h: New macros _FP_DIV_MEAT_N_loop.
2002-10-08 Aldy Hernandez <aldyh@redhat.com>
* configure.in: Compute completely-soft.
* config.make.in: Make completely-soft available to sub-makes.
* sysdeps/powerpc/soft-fp/Makefile: Add gcc-single-routines and
gcc-double-routines. Add sim-full.c. Add fenv_const and
fe_nomask to libm-support.
* sysdeps/powerpc/soft-fp/sim-full.c: New file.
* sysdeps/powerpc/soft-fp/fraiseexcpt.c: New file.
* sysdeps/powerpc/soft-fp/fegetexcept.c: New file.
* sysdeps/powerpc/soft-fp/fclrexcpt.c: New file.
* sysdeps/powerpc/soft-fp/ftestexcept.c: New file.
* sysdeps/powerpc/soft-fp/fgetexcptflg.c: New file.
* sysdeps/powerpc/soft-fp/fsetexcptflg.c: New file.
* sysdeps/powerpc/soft-fp/fedisblxcpt.c: New file.
* sysdeps/powerpc/soft-fp/feenablxcpt.c: New file.
* sysdeps/powerpc/soft-fp/fegetenv.c: New file.
* sysdeps/powerpc/soft-fp/fesetenv.c: New file.
* sysdeps/powerpc/soft-fp/fegetround.c: New file.
* sysdeps/powerpc/soft-fp/fesetround.c: New file.
* sysdeps/powerpc/soft-fp/feupdateenv.c: New file.
* sysdeps/powerpc/soft-fp/feholdexcpt.c: New file.
* sysdeps/powerpc/soft-fp/fenv_const.c: New file.
* sysdeps/powerpc/soft-fp/libm-test-ulps: New file.
* sysdeps/powerpc/soft-fp/Versions: Add libgcc soft-float
symbols. Add __sim_disabled_exceptions, __sim_exceptions,
__sim_round_mode.
* sysdeps/powerpc/soft-float/Dist: Add sim-full.c, fenv_const.c.
* sysdeps/powerpc/soft-float/sfp-machine.h: Define
FP_HANDLE_EXCEPTIONS.
Define FP_ROUNDMODE.
Redefine FP_* macros to correspond to the FE_* bit positions.
Define FP_DIV_MEAT_S to _FP_DIV_MEAT_1_loop.
Define externs for __sim_exceptions, __sim_disabled_exceptions,
__sim_round_mode, __simulate_exceptions.
* sysdeps/powerpc/fpu/bits/fenv.h: Move file from here...
* sysdeps/powerpc/bits/fenv.h: ...to here.
2002-10-06 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.c (__process_machine_rela):
Store R_PPC_UADDR32 and R_PPC_UADDR16 one byte at a time.
Use __builtin_expect for R_PPC_ADDR24 overflow check. Fix
R_PPC_ADDR16, R_PPC_UADDR16 and R_PPC_ADDR14* overflow check, use
__builtin_expect.
* sysdeps/powerpc/powerpc32/sysdep.h: New file. Define powerpc32
specific macros copied from sysdeps/powerpc/sysdep.h.
* sysdeps/powerpc/powerpc64/sysdep.h: New file. Define powerpc64
specific macros.
* sysdeps/unix/powerpc/sysdep.h: Include <bits/wordsize.h>.
[__WORDSIZE==64]: Include sysdeps/powerpc/powerpc64/sysdep.h.
[!__WORDSIZE==64]: Include sysdeps/powerpc/powerpc32/sysdep.h.
load, so as to work on both 32-bit and 64-bit. Remove unnecessary
casts. Align __libc_stack_end to 8 bytes.
2002-09-20 Roland McGrath <roland@redhat.com>
* sysdeps/powerpc/fpu/s_lrint.c: Use strong_alias/weak_alias macros
instead of asm for lrintf, __lrintf aliases.
* sysdeps/powerpc/fpu/s_lrint.c (__lrint): Change union long array to
int array for 32-/64-bit compatibility.
From Steven Munroe <sjmunroe@us.ibm.com>.
* sysdeps/powerpc/bits/wordsize.h: New file.
* sysdeps/powerpc/fpu/bits/mathinline.h (lrint, lrintf): Change long
array to int array for 32-/64-bit compatibility.
2002-09-20 Roland McGrath <roland@redhat.com>
* login/programs/utmpdump.c: Don't include <error.h>, <errno.h>.
* sysdeps/generic/utimes.c (__utimes): Don't check TVP for null.
Reported by Bruno Haible <bruno@clisp.org>.
* sysdeps/generic/ifreq.h (__ifreq): Compute termination condition
before doubling RQ_LEN.
* sysdeps/unix/sysv/linux/ifreq.h (__ifreq): Likewise.
Reported by Bruno Haible <bruno@clisp.org>.
2002-09-18 Bruno Haible <bruno@clisp.org>
* login/logout.c (logout): Don't assume ut_time has the same size as
a time_t.
* login/logwtmp.c (logwtmp): Likewise.
* sysdeps/pthread/configure: New file, moved here from
linuxthreads/sysdeps/unix/sysv/linux/configure.
Ported to PowerPC64 running Linux.
* sysdeps/powerpc/powerpc64/Dist: New file.
* sysdeps/powerpc/powerpc64/Implies: New file.
* sysdeps/powerpc/powerpc64/Makefile: New file.
* sysdeps/powerpc/powerpc64/__longjmp.S: New file.
* sysdeps/powerpc/powerpc64/atomicity.h: New file.
* sysdeps/powerpc/powerpc64/backtrace.c: New file.
* sysdeps/powerpc/powerpc64/bp-asm.h: New file.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S: New file.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S: New file.
* sysdeps/powerpc/powerpc64/dl-dtprocnum.h: New file.
* sysdeps/powerpc/powerpc64/dl-lookupcfg.h: New file.
* sysdeps/powerpc/powerpc64/dl-machine.c: New file.
* sysdeps/powerpc/powerpc64/dl-machine.h: New file.
* sysdeps/powerpc/powerpc64/memset.S: New file.
* sysdeps/powerpc/powerpc64/ppc-mcount.S: New file.
* sysdeps/powerpc/powerpc64/register-dump.h: New file.
* sysdeps/powerpc/powerpc64/setjmp.S: New file.
* sysdeps/powerpc/powerpc64/stpcpy.S: New file.
* sysdeps/powerpc/powerpc64/strchr.S: New file.
* sysdeps/powerpc/powerpc64/strcmp.S: New file.
* sysdeps/powerpc/powerpc64/strcpy.S: New file.
* sysdeps/powerpc/powerpc64/strlen.S: New file.
* sysdeps/powerpc/powerpc64/elf/bzero.S: New file.
* sysdeps/powerpc/powerpc64/elf/start.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignf.S: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions: New File.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/brk.S: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/glob64.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: New file.
* csu/gmon-start.c [!TEXT_START]: Define TEXT_START if not already
defined in entry.h.
(__gmon_start__) [!ENTRY_POINT_DECL]: Use TEXT_START macro to obtain
lowest address for profiling in __monstartup call.
* sysdeps/powerpc/powerpc64/elf/entry.h: New file.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/__longjmp.S: ...here.
* sysdeps/powerpc/add_n.S: Moved to...
* sysdeps/powerpc/powerpc32/add_n.S: ...here.
* sysdeps/powerpc/addmul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/addmul_1.S: ...here.
* sysdeps/powerpc/atomicity.h: Moved to...
* sysdeps/powerpc/powerpc32/atomicity.h: ...here.
* sysdeps/powerpc/backtrace.c: Moved to...
* sysdeps/powerpc/powerpc32/backtrace.c: ...here.
* sysdeps/powerpc/bp-asm.h: Moved to...
* sysdeps/powerpc/powerpc32/bp-asm.h: ...here.
* sysdeps/powerpc/bsd-_setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: ...here.
* sysdeps/powerpc/bsd-setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: ...here.
* sysdeps/powerpc/dl-machine.c: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.c: ...here.
* sysdeps/powerpc/dl-machine.h: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.h: ...here.
* sysdeps/powerpc/dl-start.S: Moved to...
* sysdeps/powerpc/powerpc32/dl-start.S: ...here.
* sysdeps/powerpc/gprrest0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest0.S: ...here.
* sysdeps/powerpc/gprrest1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest1.S: ...here.
* sysdeps/powerpc/gprsave0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave0.S: ...here.
* sysdeps/powerpc/gprsave1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave1.S: ...here.
* sysdeps/powerpc/lshift.S: Moved to...
* sysdeps/powerpc/powerpc32/lshift.S: ...here.
* sysdeps/powerpc/memset.S: Moved to...
* sysdeps/powerpc/powerpc32/memset.S: ...here.
* sysdeps/powerpc/mul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/mul_1.S: ...here.
* sysdeps/powerpc/ppc-mcount.S: Moved to...
* sysdeps/powerpc/powerpc32/ppc-mcount.S: ...here.
* sysdeps/powerpc/register-dump.h: Moved to...
* sysdeps/powerpc/powerpc32/register-dump.h: ...here.
* sysdeps/powerpc/rshift.S: Moved to...
* sysdeps/powerpc/powerpc32/rshift.S: ...here.
* sysdeps/powerpc/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/setjmp.S: ...here.
* sysdeps/powerpc/stpcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/stpcpy.S: ...here.
* sysdeps/powerpc/strchr.S: Moved to...
* sysdeps/powerpc/powerpc32/strchr.S: ...here.
* sysdeps/powerpc/strcmp.S: Moved to...
* sysdeps/powerpc/powerpc32/strcmp.S: ...here.
* sysdeps/powerpc/strcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/strcpy.S: ...here.
* sysdeps/powerpc/strlen.S: Moved to...
* sysdeps/powerpc/powerpc32/strlen.S: ...here.
* sysdeps/powerpc/sub_n.S: Moved to...
* sysdeps/powerpc/powerpc32/sub_n.S: ...here.
* sysdeps/powerpc/submul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/submul_1.S: ...here.
* sysdeps/powerpc/elf/bzero.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/bzero.S: ...here.
* sysdeps/powerpc/elf/start.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/start.S: ...here.
* sysdeps/powerpc/fpu/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: ...here.
* sysdeps/powerpc/fpu/fprrest.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: ...here.
* sysdeps/powerpc/fpu/fprsave.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: ...here.
* sysdeps/powerpc/fpu/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: ...here.
* sysdeps/powerpc/fpu/s_copysign.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: ...here.
* sysdeps/powerpc/fpu/s_copysignf.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/brk.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/glob64.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/kernel_stat.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/socket.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: ...here.
Support PowerPC64. Separate powerpc into powerpc/powerpc32 and
powerpc/powerpc64.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* FAQ.in: Add powerpc64 to supported targets list. Also state the
minimum gcc version is 3.2
* README: Add powerpc64 to supported targets list.
* configure.in: Change machine=powerpc to machine=powerpc/powerpc32.
Add powerpc64 and machine=powerpc/powerpc64.
(HAVE_ASM_GLOBAL_DOT_NAME): Define if linux*powerpc/powerpc64*.
* shlib-versions: Set DEFAULT version to 2.2.5 for powerpc64.
* sysdeps/powerpc/Dist: Remove dl-machine.c, dl-start.S, ppc-mcount.S,
gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S.
* sysdeps/powerpc/powerpc32/Dist: New file.
* sysdeps/powerpc/Implies: Remove wordsize-32 and powerpc/soft-fp.
* sysdeps/powerpc/powerpc32/Implies: New file.
* sysdeps/powerpc/Makefile(cflags): Remove powerpc32 specific cflags.
($(with-fp) = no): Move test to powerpc32/Makefile.
($(subdir) = misc): Move to powerpc32/Makefile.
($(build-shared) = yes): Move to powerpc32/Makefile.
($(subdir) = csu): Move to powerpc32/Makefile.
(sysdep-rtld-routines): Remove dl-start. Moved these bits to ...
* sysdeps/powerpc/powerpc32/Makefile: New file.
* sysdeps/powerpc/Versions: Remove libgcc functions.
* sysdeps/powerpc/powerpc32/Versions: New file.
* sysdeps/powerpc/fpu/Makefile: Remove fprsave and fprrest.
* sysdeps/powerpc/powerpc32/fpu/Makefile: New file.
* sysdeps/unix/sysv/linux/configure.in (powerpc*):
Set arch_minimum_kernel=2.4.19 for powerpc/powerpc64. Also set
libc_cv_gcc_unwind_find_fde=yes only if !powerpc/powerpc64.
($machine): Add powerpc/powerpc64 to if ... | for
libc_cv_slibdir=/libc64.
(powerpc*): Set ldd_rewrite_script.
* sysdeps/unix/sysv/linux/powerpc/ldd-rewrite.sed: New file.
* sysdeps/unix/sysv/linux/powerpc/Dist: Remove clone.S.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: New file.
Add clone.S.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/powerpc/Versions: Remove GLIBC_2.0
functions. Remove GLIBC_2.2 functions except getrlimit and
setrlimit. Moved them to ...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Versions: New file.
2002-09-04 Ulrich Drepper <drepper@redhat.com>
* libio/tst-atime.c: Include <errno.h>.
(do_test): Only perform fstatvfs check if ST_NOATIME is defined.
2002-09-03 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regcomp.c (regcomp): Append "__restrict" modifier to avoid
warnings of some compilers.
(build_collating_symbol): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(build_collating_symbol): Likewise.
(build_equiv_class): Likewise.
(build_charclass): Likewise.
(re_compile_pattern): Remove incorrect cast.
(re_compile_fastmap_iter): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer
in array subscript.
(parse_bracket_exp): Likewise.
* posix/regex_internal.c (re_string_construct_common): Likewise.
(re_string_allocate): Likewise.
(re_string_construct): Likewise.
(re_string_realloc_buffers): Likewise.
(build_wcs_buffer): Likewise.
(re_string_reconstruct): Likewise.
* posix/regex_internal.h: Change the type of characters in
re_string_t and bracket_elem_t from "unsigned char" to "char".
* posix/regexec.c (regexec): Append "__restrict" modifier to avoid
warnings of some compilers.
(transit_state_bkref_loop): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(check_node_accept_bytes): Likewise.
(find_collation_sequence_value): Likewise.
__pthread_initialize_minimal and __libc_check_standard_fds to
match the generic version.
* sysdeps/powerpc/Makefile (CFLAGS-pt-initfini.s): New variable.
* sysdeps/unix/sysv/linux/shmat.c (shmat): Add a cast to avoid a
warning when INLINE_SYSCALL macro uses the __syscall_ipc function.
* locale/localeconv.c (__localeconv): Cast -1 to char to avoid
warnings on platorms where char is unsigned.
* sysdeps/powerpc/elf/libc-start.c
(__cache_line_size): Declare.
(__aux_init_cache): New.
(__libc_start_main): Change type of `auxvec' parameter to
`ElfW(auxv_t) *'. Correct walking of aux vector. Call
__aux_init_cache.
* sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c
(__cache_line_size): Declare.
(__aux_init_cache): New.
(DL_PLATFORM_INIT): Define.
* sysdeps/powerpc/memset.S: Define __cache_line_size and use its
value to select the correct stride for dcbz.
2002-08-22 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/elf/libc-start.c
(__cache_line_size): Declare.
(__aux_init_cache): New.
(__libc_start_main): Change type of `auxvec' parameter to
`ElfW(auxv_t) *'. Correct walking of aux vector. Call
__aux_init_cache.
* sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c
(__cache_line_size): Declare.
(__aux_init_cache): New.
(DL_PLATFORM_INIT): Define.
* sysdeps/powerpc/memset.S: Define __cache_line_size and use its
value to select the correct stride for dcbz.
Changes contributed by Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
and Jack Howarth <howarth@bromo.med.uc.edu>.
* sysdeps/powerpc/Makefile [$(have-protected) = yes]
(CPPFLAGS-divdi3.c, CPPFLAGS-libgcc-compat.S): New variables,
pass -DHAVE_DOT_HIDDEN for these files.
* sysdeps/powerpc/Versions (libc: GLIBC_2.0): Added __floatdidf,
__floatdisf.
* sysdeps/powerpc/divdi3.c: New file.
* sysdeps/powerpc/libgcc-compat.S: New file, replacement for ...
* sysdeps/powerpc/libgcc-compat.c: ... this, file removed.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/testdata/EUC-JISX0213: New file.
* iconvdata/testdata/EUC-JISX0213..UTF8: New file.
* iconvdata/testdata/SHIFT_JISX0213: New file.
* iconvdata/testdata/SHIFT_JISX0213..UTF8: New file.
* iconvdata/testdata/ISO-2022-JP-3: New file.
* iconvdata/testdata/ISO-2022-JP-3..UTF8: New file.
* iconvdata/TESTS: Add EUC-JISX0213, SHIFT_JISX0213, ISO-2022-JP-3.
* iconvdata/run-iconv-test.sh: Skip the charmap test if the charmap
contains comments indicating precomposed characters.
2002-04-21 Bruno Haible <bruno@clisp.org>
* iconvdata/iso-2022-jp-3.c: New file.
* iconvdata/gconv-modules (ISO-2022-JP-3): New module.
* iconvdata/Makefile (modules): Add ISO-2022-JP-3.
(LDFLAGS-ISO-2022-JP-3.so): New variable.
(ISO-2022-JP-3.so): Depend on libJIS.so and libJISX0213.so.
(distribute): Add iso-2022-jp-3.c.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/tst-table-to.c (main): Restore handling of
transliterations, broken by last patch.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/TESTS: Add IBM922, IBM1124, IBM1129.
2002-05-12 Bruno Haible <bruno@clisp.org>
* iconvdata/euc-jisx0213.c (BODY for FROM_LOOP): Don't advance inptr
when there is not enough room in the output buffer.
* iconvdata/shift_jisx0213.c (BODY for FROM_LOOP): Likewise.
2002-04-20 Bruno Haible <bruno@clisp.org>
* iconv/skeleton.c ({FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}): New
macros.
(RESET_INPUT_BUFFER): Use them instead of {MIN,MAX}_NEEDED_{FROM,TO}.
Also make this macro work if FROM_DIRECTION evaluates to 0.
(gconv_init): Use the new macros instead of {MIN,MAX}_NEEDED_{FROM,TO}.
(FUNCTION_NAME): Likewise, in the handling of unaligned accesses and
of consume_incomplete.
* iconvdata/cp1255.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}
instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to
4, not 8.
* iconvdata/cp1258.c: Likewise.
* iconvdata/ibm930.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}
instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 3,
not 2.
* iconvdata/ibm933.c: Likewise.
* iconvdata/ibm935.c: Likewise.
* iconvdata/ibm937.c: Likewise.
* iconvdata/ibm939.c: Likewise.
* iconvdata/iso-2022-cn.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 6, not 4.
* iconvdata/iso-2022-cn-ext.c: Likewise.
* iconvdata/iso-2022-jp.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}.
* iconvdata/tcvn5712-1.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_FROM to 1, not 2.
* iconvdata/euc-jisx0213.c: Define
{FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of
{MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to 8, not 4.
* iconvdata/shift_jisx0213.c: Likewise.
2002-05-14 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/powerpc/Makefile (sysdeps_routines): Add divdi3, cmpdi2,
shdi3, fixdfdi, fixsfdi in csu dir.
(shared-only-routines): Likewise.
* sysdeps/wordsize-32/cmpdi2.c: New file.
* sysdeps/wordsize-32/shdi3.c: New file.
* sysdeps/wordsize-32/fixdfdi.c: New file.
* sysdeps/wordsize-32/fixsfdi.c: New file.
* sysdeps/powerpc/Versions (__divdi3, __moddi3, __udivdi3, __umoddi3,
__ashldi3, __ashrdi3, __lshrdi3, __cmpdi2, __ucmpdi2, __fixdfdi,
__fixsfdi, __fixunsdfdi, __fixunssfdi): Export at GLIBC_2.0.
* sysdeps/unix/sysv/linux/semctl.c (__old_semctl, __new_semctl):
Only use va_arg if the argument will be used [PR libc/3259].
2002-05-06 Michael A. Schmidt <mmaass@us.ibm.com>
* catgets/catgets.c (catopen): Free buffer if internal catalog
open fails.
2002-05-14 Ulrich Drepper <drepper@redhat.com>
* debug/xtrace.sh: Make more robust. For realtime tracking use
non-buffering methods.
* debug/pcprofiledump.c: Implement -u option.
Patch by Roger Luethi <rl@hellgate.ch>.
2002-03-14 Jakub Jelinek <jakub@redhat.com>
* locale/broken_cur_max.c (__ctype_get_mb_cur_max): Use nl_langinfo.
* locale/Versions (_nl_current_LC_COLLATE, _nl_current_LC_CTYPE):
Remove.
2002-03-14 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/mp_clz_tab.c: New file.
* sysdeps/i386/mp_clz_tab.c: New file.
* sysdeps/hppa/mp_clz_tab.c: New file.
* sysdeps/powerpc/mp_clz_tab.c: New file.
* stdlib/Makefile (aux): Revert last patch.
* math/Makefile (gmp-objs): Likewise.
2002-03-13 Paul Eggert <eggert@twinsun.com>
* time/strftime.c: Comment fixes for references to obsolescent
standards, In most cases the simplest fix is to remove the
confusing comments. Cross-referencing all the standards properly
is a bit of a pain, and it should be enough to put that info in
the documentation as I did in my recent time.texi patch.
2002-03-13 Paul Eggert <eggert@twinsun.com>
* manual/time.texi (Formatting Calendar Time):
ISO C99 also specifies the E and O modifiers.
%P is a GNU extension, and is not in ISO C99.
Mention that %r is equivalent to %I:%M:%S %p in the POSIX locale.
%T is also in ISO C99.
The RFC 822 example is not valid in arbitrary locales.
Reword the POSIX.2 wording slightly, to make it a bit clearer
that POSIX.2 formats are also supported by later POSIX versions.
If a format was introduced in ISO C99 it is also required by
POSIX.1-2001.
_S_catch_exception_raise_state_identity,
_hurdsig_fault_catch_exception_raise_state,
_hurdsig_fault_catch_exception_raise_state_identity.
* mach/shortcut.awk: Don't apply the /^}$/ rule when $proto == "".
* sysdeps/mach/getsysstats.c (__get_avphys_pages) [HOST_VM_INFO]: Use
__host_info with HOST_VM_INFO flavor instead of __vm_statistics.
* sysdeps/mach/hurd/getpriority.c [TASK_SCHED_TIMESHARE_INFO]: Find
`base_priority' in PIP->timeshare_base_info instead of PIP->taskinfo.
* sysdeps/mach/hurd/dl-sysdep.c [FMH]: Define for i386 only.
(fmh, unfmh): Define these functions only #if FMH. Otherwise define
them as no-op macros.
[FMH] (ELF_MACHINE_USER_ADDRESS_MASK): Redefine it to zero.
(__mmap): Uncomment uses of ELF_MACHINE_USER_ADDRESS_MASK.
* sysdeps/powerpc/dl-machine.h
(ELF_MACHINE_USER_ADDRESS_MASK): New macro.
2001-12-11 Jakub Jelinek <jakub@redhat.com>
* elf/Makefile (dl-routines): Add conflict.
(rtld-ldscript-in, rtld-ldscript, rtld-parms): Remove.
(ld.so): Add _begin local symbol.
* elf/elf.h (DT_VALTAGIDX, DT_VALNUM, DT_ADDRTAGIDX, DT_ADDRNUM):
Define.
* elf/dl-deps.c (_dl_build_local_scope): New.
(_dl_map_object_deps): If LD_TRACE_PRELINKING, compute local scopes
of all libraries.
* elf/do-rel.h (VALIDX): Define.
(elf_dynamic_do_rel): If ELF_MACHINE_PLT_REL is defined, don't do
lazy binding for RELA. If DT_GNU_PRELINKED, DT_RELACOUNT relocations
can be skipped.
* elf/dl-conflict.c: New file.
* elf/dl-lookup.c (_dl_debug_bindings): New.
(_dl_lookup_symbol): Use _dl_debug_bindings. Reference_name is always
non-NULL.
(_dl_lookup_symbol_skip): Likewise.
(_dl_lookup_versioned_symbol): Likewise.
(_dl_lookup_versioned_symbol_skip): Likewise.
* elf/dl-runtime.c (PLTREL): If ELF_MACHINE_PLT_REL is defined,
define to ElfW(Rel).
* elf/dynamic-link.h (elf_get_dynamic_info): Record selected dynamic
tags in the DT_VALRNGLO..DT_VALRNGHI and DT_ADDRRNGLO..DT_ADDRRNGHI
ranges.
Don't adjust address dynamic tags if l_addr is 0.
* elf/rtld.c (_dl_trace_prelink, _dl_trace_prelink_map): New variables.
(_dl_start): Skip ELF_DYNAMIC_RELOCATE if ld.so is prelinked.
(VALIDX, ADDRIDX): Define.
(_dl_start_final): Initialize _dl_rtld_map's l_map_start and l_map_end.
(dl_main): Print library list for LD_TRACE_PRELINKING.
If prelinking information can be used, skip relocating libraries and
call _dl_resolve_conflicts instead.
(process_envvars): Handle LD_TRACE_PRELINKING envvar.
* elf/dl-load.c (_dl_map_object): Don't create fake libs
if LD_TRACE_PRELINKING.
* include/link.h (struct link_map) [l_info]: Add DT_VALNUM
+ DT_ADDRNUM.
* sysdeps/generic/ldsodefs.h (_dl_trace_prelink_map): New declaration.
(DL_DEBUG_PRELINK): Define.
(_dl_resolve_conflicts): Add prototype.
* sysdeps/alpha/dl-machine.h (elf_machine_runtime_setup): Reinitialize
.plt for prelinked libraries where prelinking info cannot be used.
(elf_machine_rela): If relocating R_ALPHA_JMP_SLOT in .gnu.conflict
section, use RESOLVE_CONFLICT_FIND_MAP to find out reloc's link_map.
* sysdeps/arm/bits/link.h: New file.
* sysdeps/arm/dl-machine.h (elf_machine_runtime_setup): Save original
content of .got[1].
(ELF_MACHINE_NO_RELA): Only define if RTLD_BOOTSTRAP.
(ELF_MACHINE_PLT_REL): Define.
(elf_machine_rela, elf_machine_rela_relative): New.
(elf_machine_lazy_rel): Reinitialize R_ARM_JUMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/i386/bits/link.h: New file.
* sysdeps/i386/dl-machine.h (elf_machine_runtime_setup): Save original
content of .got[1].
(ELF_MACHINE_NO_RELA): Only define if RTLD_BOOTSTRAP.
(ELF_MACHINE_PLT_REL): Define.
(elf_machine_rela, elf_machine_rela_relative): New.
(elf_machine_lazy_rel): Reinitialize R_386_JUMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/powerpc/dl-machine.h (elf_machine_rela): If relocating
conflicts, skip finaladdr computation. Use RESOLVE_CONFLICT_FIND_MAP
to find out map for R_PPC_JMP_SLOT relocs.
* sysdeps/sparc/sparc32/dl-machine.h (VALIDX): Define.
(OPCODE_BA): Define.
(elf_machine_runtime_setup): Reinitialize .plt for prelinked
libraries where prelinking info cannot be used.
(sparc_fixup_plt): Renamed from elf_machine_fixup_plt.
(elf_machine_fixup_plt): Call sparc_fixup_plt.
(elf_machine_rela): Set value to 0 if relocating conflicts.
Call sparc_fixup_plt for R_SPARC_JMP_SLOT.
* sysdeps/sparc/sparc64/dl-machine.h (VALIDX): Define.
(sparc64_fixup_plt): Fix a typo.
(elf_machine_rela): Set value to 0 if relocating conflicts.
Handle R_SPARC_JMP_SLOT relocs when relocating conflicts.
(elf_machine_runtime_setup): Reinitialize .plt for prelinked
libraries where prelinking info cannot be used.
* sysdeps/sh/bits/link.h: New file.
* sysdeps/sh/dl-machine.h (elf_machine_runtime_setup): Save original
content of .got[1].
(elf_machine_lazy_rel): Reinitialize R_SH_JMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/s390/s390-32/bits/link.h: New file.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_runtime_setup):
Save original content of .got[1].
(elf_machine_lazy_rel): Reinitialize R_390_JMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/s390/s390-64/bits/link.h: New file.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_runtime_setup):
Save original content of .got[1].
(elf_machine_lazy_rel): Reinitialize R_390_JMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/x86_64/bits/link.h: New file.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Save original content of .got[1].
(elf_machine_lazy_rel): Reinitialize R_X86_64_JMP_SLOT address instead
of adjusting it if prelinked and prelinking cannot be used.
* sysdeps/powerpc/elf/sysdep.h: Remove this file, because it overrides
the more-specific unix/sysv/linux/powerpc file and breaks everything.
* sysdeps/powerpc/sysdep.h (ALIGNARG, ASM_TYPE_DIRECTIVE,
ASM_SIZE_DIRECTIVE, CALL_MCOUNT, ENTRY, EALIGN, DO_CALL, JUMPTARGET,
PSEUDO, PSEUDO_RET, PSEUDO_END, L, C_TEXT): These macros moved here
here, put under [__ELF__].
ASM_TYPE_DIRECTIVE, ASM_SIZE_DIRECTIVE, CALL_MCOUNT, ENTRY, EALIGN,
DO_CALL, JUMPTARGET, PSEUDO, PSEUDO_RET, PSEUDO_END, L, C_TEXT):
Move all these assembly-related definitions to ...
* sysdeps/powerpc/elf/sysdep.h: ... this new file.
* sysdeps/mach/powerpc/machine-lock.h: Assembly code rewritten
by Peter Bruin <pjbruin@dds.nl>.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-06-11 Andreas Jaeger <aj@suse.de>
* sysdeps/ieee754/ldbl-128/e_coshl.c: New file. Contributed by
Stephen L Moshier <moshier@mediaone.net>.
* aclocal.m4: Quote AC_FD_MSG and AC_FD_CC.
* sysdeps/powerpc/fpu/libm-test-ulps: Add ULPs for tanh (-0.7).
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
2001-04-03 Ulrich Drepper <drepper@redhat.com>
* misc/dirname.c (dirname): Handle multiple slashes correctly.
2001-04-03 Martin Schwidefsky <schwidefsky@de.ibm.com>
* sysdeps/s390/s390-64/initfini.c: Fix __gmon_start__ GOT access.
2001-04-03 Martin Schwidefsky <schwidefsky@de.ibm.com>
* sysdeps/s390/s390-32/bcopy.S: Optimize for speed.
* sysdeps/s390/s390-64/bcopy.S: Likewise.
* sysdeps/s390/s390-32/mempcy.S: Likewise.
* sysdeps/s390/s390-64/memcpy.S: Likewise.
2001-04-02 Bruno Haible <haible@clisp.cons.org>
* manual/message.texi (Advanced gettext functions): More specific
syntax in the plural formula examples.
2001-04-02 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/powerpc/atomicity.h: Silence warnings.
* sysdeps/powerpc/dl-machine.h: Likewise.
* sysdeps/powerpc/register-dump.h: Likewise.
* sysdeps/powerpc/fpu/s_lrint.c: Likewise.
2001-04-02 Andreas Jaeger <aj@suse.de>
* misc/tst-dirname.c (main): Add more tests, derived from a bug
report by Michael Kerrisk <mtk16@ext.canterbury.ac.nz>.
2001-04-01 Andreas Jaeger <aj@suse.de>
* debug/xtrace.sh (pcprofileso): Use SLIBDIR since libpcprofile.so
is installed there.
* malloc/memusage.sh (memusageso): Likewise for libmemusage.so.
2001-04-01 H.J. Lu <hjl@gnu.org>
* posix/annexc.c (macrofile): Renamed from TMPFILE and set to
tmpnam (NULL).
* stdlib/isomac.c (macrofile): Likewise.
2001-03-30 Thorsten Kukuk <kukuk@suse.de>
* inet/rcmd.c: Allow AF_UNSPEC as parameter.
* nis/ypclnt.c (yp_all): Print error message only at last try,
check for protocoll error only if we don't have a network error.
2001-02-28 Ulrich Drepper <drepper@redhat.com>
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Don't handle
relocations which are not in ld.so if RTLD_BOOTSTRAP is defined.
* sysdeps/powerpc/dl-machine.c (__process_machine_rela): Fix typo.
* elf/dl-misc.c (_dl_debug_vdprintf): Fix type visible on 64-bit
machines.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h (C_TEXT): Define.
2001-01-05 H.J. Lu <hjl@gnu.org>
* elf/dl-support.c (non_dynamic_init): Move the auxiliary
vector checking to ...
(_dl_aux_init): Here. New function. Defined only if
HAVE_AUX_VECTOR is defined.
* sysdeps/generic/libc-start.c (__libc_start_main): Call
_dl_aux_init for static binaries if HAVE_AUX_VECTOR is defined.
* sysdeps/powerpc/elf/libc-start.c (__libc_start_main): Call
_dl_aux_init.
* sysdeps/unix/sysv/linux/ldsodefs.h (DL_FIND_AUXV): Removed.
(HAVE_AUX_VECTOR): Defined.
(_dl_aux_init): Declared.
* manual/Makefile (TEXI2PDF): Change to texi2dvi --pdf.
Suggested by Minko Markov <mmarkov@home.com>.
2001-01-02 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/powerpc/elf/start.S (__data_start): Make it global.
* sysdeps/powerpc/dl-machine.c (dl_reloc_overflow): Print the name of
the failing symbol.
(__process_machine_rela): Pass symbol to dl_reloc_overflow().
2001-01-02 Ben Collins <bcollins@debian.org>
* time/tzset.c (tzset_internal): Make sure we fall back to UTC
if TZ is not set and TZDEFAULT is not present.
2001-01-01 Ben Collins <bcollins@debian.org>
* string/strings.h: Make sure we declare our functions even if
string.h is already included, based on whether or not __USE_BSD is
defined.
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* dlfcn/dlerror.c (dlerror): Handle call of dlerror() before any
other dlopen() and dlsym().
Based on a patch by Ben Collins <bcollins@debian.org>.
2001-01-02 Andreas Jaeger <aj@suse.de>
* dlfcn/errmsg1.c (main): Call dlerror initially.
Reported by Ben Collins <bcollins@debian.org>.
2001-01-02 Ulrich Drepper <drepper@redhat.com>
2000-10-19 H.J. Lu <hjl@gnu.org>
* elf/Makefile (distribute): Add neededtest.c, neededobj1.c,
neededobj2.c and neededobj3.c.
(tests): Add neededtest.
(modules-names): Add neededobj1, neededobj2 and neededobj3.
($(objpfx)neededobj1.so): New target.
($(objpfx)neededobj2.so): Likewise.
($(objpfx)neededobj3.so): Likewise.
($(objpfx)neededtest): Likewise.
($(objpfx)neededtest.out): Likewise.
* elf/neededtest.c: New. Based on the bug report from
Allen Bauer <kylix_rd@hotmail.com>.
* elf/neededobj1.c: Likewise.
* elf/neededobj2.c: Likewise.
* elf/neededobj3.c: Likewise.
2000-10-20 Ulrich Drepper <drepper@redhat.com>
* elf/dl-close.c (_dl_close): Decrement reference counter for all
dependencies even if the DSO does not get unloaded.
* elf/dl-load.c (_dl_map_object_from_fd): Pass pointer to ELF header
to elf_machine_matches_host.
* sysdeps/alpha/dl-machine.h (elf_machine_matches_host): Parameter
is now pointer to ELF header.
* sysdeps/arm/dl-machine.h: Likewise.
* sysdeps/generic/dl-machine.h: Likewise.
* sysdeps/hppa/dl-machine.h: Likewise.
* sysdeps/i386/dl-machine.h: Likewise.
* sysdeps/ia64/dl-machine.h: Likewise.
* sysdeps/m68k/dl-machine.h: Likewise.
* sysdeps/mips/dl-machine.h: Likewise.
* sysdeps/mips/mips64/dl-machine.h: Likewise.
* sysdeps/powerpc/dl-machine.h: Likewise.
* sysdeps/s390/dl-machine.h: Likewise.
* sysdeps/sh/dl-machine.h: Likewise.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* sysdeps/sparc/sparc64/dl-machine.h: Likewise.
Patch by Martin Schwidefsksy <schwidefsky@de.ibm.com>.
2000-10-20 Jakub Jelinek <jakub@redhat.com>
* include/limits.h: Include bits/wordsize.h, use #if __WORDSIZE == 64
check instead of #ifdef __alpha__.
* include/bits/xopen_lim.h (WORD_BIT, LONG_BIT): Don't count on
INT_MAX, __INT_MAX__, LONG_MAX or __LONG_MAX__ being defined when
this is included.
* posix/wordexp-tst.sh (testout): Place output file in build
directory. Patch by Joseph S. Myers <jsm28@cam.ac.uk>.
(__process_machine_rela): Print the address of an overflowing
reloc.
2000-10-17 Geoffrey Keating <geoffk@cygnus.com>
* sysdeps/powerpc/fpu/bits/mathinline.h: Add versions
of the unordered comparison functions that use the GCC builtins.
* sysdeps/powerpc/dl-machine.c (dl_reloc_overflow): New function.
(__process_machine_rela): Print the address of an overflowing
reloc.
2000-09-06 Andreas Jaeger <aj@suse.de>
* sysdeps/alpha/soft-fp/Dist: New file.
* sysdeps/i386/soft-fp/Dist: New file.
* sysdeps/mips/mips64/soft-fp/Dist: New file.
* sysdeps/mips/soft-fp/Dist: New file.
* sysdeps/powerpc/soft-fp/Dist: New file.
* sysdeps/sparc/sparc32/soft-fp/Dist: New file.
* sysdeps/sparc/sparc64/soft-fp/Dist: New file.
* sysdeps/sparc/sparc64/soft-fp/Makefile [$(subdir) = soft-fp]:
Use sysdep_routines instead of routines to fix make dist failure.
* sysdeps/sparc/sparc32/soft-fp/Makefile: Likewise (in commented
out code).
* sysdeps/powerpc/soft-fp/Makefile [$(subdir) = soft-fp]: Likewise.
* sysdeps/mips/Makefile [$(subdir) = misc]: Use
sysdep_headers instead of headers for make dist.
* sysdeps/unix/sysv/linux/mips/Makefile [$(subdir) = misc]:
Likewise.
2000-09-06 Andreas Jaeger <aj@suse.de>
* sysdeps/powerpc/Makefile [$(subdir) = elf]: Modify
sysdep-dl-routines and sysdep_routines instead of rtld-routines
and dl-routines.
* soft-fp/ChangeLog: Merged with this file.
2000-06-13 Ulrich Drepper <drepper@redhat.com>
* soft-fp/Makefile (distribute): Add op-8.h and testit.c.
* soft-fp/Makefile (distribute): Add the math functions, too.
* soft-fp/Makefile (distribute): Add ChangeLog, Banner, and configure.
2000-03-03 Geoff Keating <geoffk@cygnus.com>
* soft-fp/soft-fp.h (_FP_ROUND_ZERO): Cast 0 to void before using it
as a statement.
* soft-fp/sysdeps/powerpc/Makefile (routines): New file.
* soft-fp/sysdeps/powerpc/q_*: New files.
2000-09-05 Andreas Jaeger <aj@suse.de>
* sysdeps/sparc/sparc64/soft-fp/Versions: Use version glibc 2.2.
* soft-fp/configure: Remove.
* soft-fp/sysdeps/sparc/sparc64/qp_neg.S: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_neg.S: ... to here.
* soft-fp/sysdeps/sparc/sparc32/Makefile: Move from here...
* sysdeps/sparc/sparc32/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/powerpc/Makefile: Move from here...
* sysdeps/powerpc/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/sparc/sparc64/Makefile: Move from here...
* sysdeps/sparc/sparc64/soft-fp/Makefile: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_neg.S: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_neg.S: ... to here.
* soft-fp/sysdeps/powerpc/q_add.c: Move from here...
* sysdeps/powerpc/soft-fp/q_add.c: ... to here.
* soft-fp/sysdeps/powerpc/q_cmp.c: Move from here...
* sysdeps/powerpc/soft-fp/q_cmp.c: ... to here.
* soft-fp/sysdeps/powerpc/q_cmpe.c: Move from here...
* sysdeps/powerpc/soft-fp/q_cmpe.c: ... to here.
* soft-fp/sysdeps/powerpc/q_div.c: Move from here...
* sysdeps/powerpc/soft-fp/q_div.c: ... to here.
* soft-fp/sysdeps/powerpc/q_dtoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_dtoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_feq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_feq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fge.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fge.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fgt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fgt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fle.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fle.c: ... to here.
* soft-fp/sysdeps/powerpc/q_flt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_flt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_fne.c: Move from here...
* sysdeps/powerpc/soft-fp/q_fne.c: ... to here.
* soft-fp/sysdeps/powerpc/q_itoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_itoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_lltoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_lltoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_mul.c: Move from here...
* sysdeps/powerpc/soft-fp/q_mul.c: ... to here.
* soft-fp/sysdeps/powerpc/q_neg.c: Move from here...
* sysdeps/powerpc/soft-fp/q_neg.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtod.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtod.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoi.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoi.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoll.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoll.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtos.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtos.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtou.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtou.c: ... to here.
* soft-fp/sysdeps/powerpc/q_qtoull.c: Move from here...
* sysdeps/powerpc/soft-fp/q_qtoull.c: ... to here.
* soft-fp/sysdeps/powerpc/q_sqrt.c: Move from here...
* sysdeps/powerpc/soft-fp/q_sqrt.c: ... to here.
* soft-fp/sysdeps/powerpc/q_stoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_stoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_sub.c: Move from here...
* sysdeps/powerpc/soft-fp/q_sub.c: ... to here.
* soft-fp/sysdeps/powerpc/q_ulltoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_ulltoq.c: ... to here.
* soft-fp/sysdeps/powerpc/q_util.c: Move from here...
* sysdeps/powerpc/soft-fp/q_util.c: ... to here.
* soft-fp/sysdeps/powerpc/q_utoq.c: Move from here...
* sysdeps/powerpc/soft-fp/q_utoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_add.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_add.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_cmp.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_cmp.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_cmpe.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_cmpe.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_div.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_div.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_dtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_dtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_feq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_feq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fge.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fge.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fgt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fgt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fle.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fle.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_flt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_flt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_fne.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_fne.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_itoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_mul.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_mul.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_neg.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_neg.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtod.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtod.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoi.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoi.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtos.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtos.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoui.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtoux.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_qtox.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_sqrt.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_stoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_stoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_sub.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_sub.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_uitoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_util.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_util.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_uxtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc32/q_xtoq.c: Move from here...
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_add.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_add.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_cmp.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_cmp.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_cmpe.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_cmpe.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_div.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_div.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_dtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_dtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_feq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_feq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fge.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fge.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fgt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fgt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fle.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fle.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_flt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_flt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_fne.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_fne.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_itoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_itoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_mul.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_mul.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtod.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtod.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoi.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoi.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtos.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtos.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoui.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoui.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtoux.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtoux.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_qtox.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_qtox.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_sqrt.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_sqrt.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_stoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_stoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_sub.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_sub.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_uitoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_uitoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_util.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_util.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_uxtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_uxtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/qp_xtoq.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/qp_xtoq.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_frexpl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_frexpl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_ilogbl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_ilogbl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_scalblnl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_scalblnl.c: ... to here.
* soft-fp/sysdeps/sparc/sparc64/s_scalbnl.c: Move from here...
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c: ... to here.
* soft-fp/sysdeps/alpha/sfp-machine.h: Move from here...
* sysdeps/alpha/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/i386/sfp-machine.h: Move from here...
* sysdeps/i386/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/mips/mips64/sfp-machine.h: Move from here...
* sysdeps/mips/mips64/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/mips/sfp-machine.h: Move from here...
* sysdeps/mips/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/powerpc/sfp-machine.h: Move from here...
* sysdeps/powerpc/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/sparc/sparc32/sfp-machine.h: Move from here...
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/sparc/sparc64/sfp-machine.h: Move from here...
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: ... to here.
* soft-fp/sysdeps/powerpc/Versions: Move from here...
* sysdeps/powerpc/soft-fp/Versions: ... to here.
* soft-fp/sysdeps/sparc/sparc64/Versions: Move from here...
* sysdeps/sparc/sparc64/soft-fp/Versions: ... to here.
* libio/oldiofsetpos64.c: iofsetpos was introduced in glibc 2.1,
change symbol version.
* libio/oldiofgetpos64.c: Likewise.
Reported by Martin v. Loewis <martin@loewis.home.cs.tu-berlin.de>.
* locale/programs/ld-ctype.c (charclass_charcode_ellipsis): Fix
typo.
Reported by dyky@kondara.org, closes PR libc/1886.
* stdlib/tst-strtod.c: Add testcases for denormal numbers from PR
libc/1880.
* stdlib/Makefile (headers): Add bits/wchar.h.
* sysdeps/unix/sysv/linux/i386/bits/wchar.h: New file.
* sysdeps/generic/bits/wchar.h: New file.
* sysdeps/generic/stdint.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
Change UINT*8_MAX and UIN*16_MAX value to type int.
* wcsmbs/wchar.h: Include <bits/wchar.h>. Use values in this
file to define WCHAR_MIN and WCHAR_MAX.
* sysdeps/alpha/fpu/bits/mathdef.h: Make FP_ILOGB0 and FP_ILOGBNAN
int values.
* sysdeps/arm/fpu/bits/mathdef.h: Likewise.
* sysdeps/generic/bits/mathdef.h: Likewise.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
* sysdeps/m68k/fpu/bits/mathdef.h: Likewise.
* sysdeps/powerpc/fpu/bits/mathdef.h: Likewise.
* sysdeps/sparc/fpu/bits/mathdef.h: Likewise.
* locale/locale.h (struct lconv): Add __ prefix to the new members
if not C99.
* sysdeps/generic/inttypes.h: Remove unnecessary imaxabs and
imaxdiv optimizations.
* sysdeps/wordsize-32/lldiv.c: Add hack to make alias work.
* sysdeps/wordsize-64/ldiv.c: Likewise.
* sysdeps/alpha/fpu/bits/fenv.h: Change type of FE_*_ENV macros to
const fenv_t*.
* sysdeps/generic/bits/fenv.h: Likewise.
* sysdeps/i386/fpu/bits/fenv.h: Likewise.
* sysdeps/ia64/bits/fenv.h: Likewise.
* sysdeps/m68k/fpu/bits/fenv.h: Likewise.
* sysdeps/mips/bits/fenv.h: Likewise.
* sysdeps/s390/fpu/bits/fenv.h: Likewise.
* sysdeps/sparc/fpu/bits/fenv.h: Likewise.
Reported by Joseph S. Myers <jsm28@cam.ac.uk>.
* catgets/open_catalog.c: Likewise.
* sysdeps/powerpc/fpu/feenablxcpt.c: New file.
* sysdeps/powerpc/fpu/fegetexcept.c: New file.
* sysdeps/unix/sysv/linux/powerpc/fe_nomask.c: New file.
2000-08-27 Geoff Keating <geoffk@cygnus.com>
* sysdeps/powerpc/fpu/fedisblxcpt.c: New file.
* sysdeps/powerpc/fpu/feenablxcpt.c: New file.
* sysdeps/powerpc/fpu/fegetexcept.c: New file.
* sysdeps/unix/sysv/linux/powerpc/fe_nomask.c: New file.
* sysdeps/powerpc/bits/setjmp.h (JB_SIZE): New constant.
* sysdeps/powerpc/elf/libc-start.c (__libc_start_main):
Wrap bounds around argv & envp and each of their string members.
* sysdeps/powerpc/elf/start.S: Designate BP symbols.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Wrap entry-point
symbol in BP_SYM (). Discard bounds of address arg.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/mmap64.c (__mmap64):
Discard bounds on address arg, add bounds to return value.
2000-07-21 Greg McGary <greg@mcgary.org>
* sysdeps/powerpc/bp-asm.h (DISCARD_BOUNDS): Rename from UNCHECK_BOUNDS.
* sysdeps/powerpc/bits/setjmp.h (JB_SIZE): New constant.
* sysdeps/powerpc/elf/libc-start.c (__libc_start_main):
Wrap bounds around argv & envp and each of their string members.
* sysdeps/powerpc/elf/start.S: Designate BP symbols.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Wrap entry-point
symbol in BP_SYM (). Discard bounds of address arg.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/mmap64.c (__mmap64):
Discard bounds on address arg, add bounds to return value.
