Commit Graph

20 Commits

Author SHA1 Message Date
Lukasz Majewski
47f78f3683 y2038: Convert gai_suspend to support 64 bit time
This change uses (in gai_misc.h):
- __futex_abstimed_wait64 (instead of futex_reltimed_wait)
- __futex_abstimed_wait_cancellable64
    	(instead of futex_reltimed_wait_cancellable)
        from ./sysdeps/nptl/futex-helpers.h

The gai_suspend() accepts relative timeout, which then is converted to
absolute one.

The i686-gnu port (HURD) do not define DONT_NEED_GAI_MISC_COND and as it
doesn't (yet) support 64 bit time it uses not converted
pthread_cond_timedwait().

The __gai_suspend() is supposed to be run on ports with __TIMESIZE !=64 and
__WORDSIZE==32. It internally utilizes __gai_suspend_time64() and hence the
conversion from 32 bit struct timespec to 64 bit one is required.

For ports supporting 64 bit time the __gai_suspend_time64() will be used
either via alias (to __gai_suspend when __TIMESIZE==64) or redirection
(when -D_TIME_BITS=64 is passed).

Build tests:
./src/scripts/build-many-glibcs.py glibcs

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-04 10:04:38 +01:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Zack Weinberg
4a39c34c4f Change most internal uses of __gettimeofday to __clock_gettime.
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.  (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.

The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail.  Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors.  POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported.  For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.

(For the record, POSIX also says gettimeofday can never fail.)

(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME.  But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API.  Oh well.)

A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier.  We also assume this cannot
fail.  Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.

With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.

The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all.  I fixed this.  It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.

There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.

Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.

Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-30 17:04:10 -03:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Florian Weimer
bee05c9d58 resolv: Replace __builtin_expect with __glibc_unlikely/__glibc_likely 2017-04-19 14:29:24 +02:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Roland McGrath
e185d57e99 Use unsigned types for counters in getaddrinfo_a code. 2015-06-24 17:58:12 -07:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper
243b9ac192 * locale/programs/ld-collate.c (collate_read): Goto sym_equiv_free
rather than col_sym_free.  Move seqp declaration earlier.

	* resolv/gai_suspend.c (gai_suspend): Make sure result is initialized.
2006-09-06 16:51:47 +00:00
Ulrich Drepper
f1762c0c4b [BZ #2978]
2006-08-03  Ulrich Drepper  <drepper@redhat.com>
	* rt/Makefile (tests): Add tst-clock2.
	* rt/tst-clock2.c: New file.

	[BZ #2978]
	* resolv/gai_notify.c (__gai_notify_only): Copy memory for thread
	function and its parameters and pass it to new thread.
	(__gai_notify): Add support for alternative waiting for completion.
	* resolv/gai_suspend.c (gai_suspend): Add support for alternative
	waiting for completion.
	* resolv/getaddrinfo_a.c: Likewise.
	* resolv/gai_misc.h (struct waitlist): Don't add cond if alternative
	waiting for completion is used.
	* resolv/gai_misc.c: Allow overwriting code to start helper thread.
	* resolv/gai_cancel.c: Include <gai_misc.h> not "gai_misc.h".
	* resolv/gai_error.c: Likewise.
	* resolv/gai_sigqueue.c: Likewise.

	* hurd/getdport.c (__detdport): Don't return EBADF; instead set
	errno to EBADF and return MACH_PORT_NULL.
	* posix/Makefile (CFLAGS-waitid.c): Add -fasynchronous-unwind-tables.
2006-08-03 08:17:20 +00:00
Ulrich Drepper
a334319f65 (CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4. 2004-12-22 20:10:10 +00:00
Jakub Jelinek
0ecb606cb6 2.5-18.1 2007-07-12 18:26:36 +00:00
Andreas Jaeger
41bdb6e20c Update to LGPL v2.1.
2001-07-06  Paul Eggert  <eggert@twinsun.com>

	* manual/argp.texi: Remove ignored LGPL copyright notice; it's
	not appropriate for documentation anyway.
	* manual/libc-texinfo.sh: "Library General Public License" ->
	"Lesser General Public License".

2001-07-06  Andreas Jaeger  <aj@suse.de>

	* All files under GPL/LGPL version 2: Place under LGPL version
	2.1.
2001-07-06 04:58:11 +00:00
Ulrich Drepper
2ace572170 Update.
* Versions.def: Add libanl definition.
	* shlig-versions: Add entry for libanl.
	* resolv/Makefile (distribute): Add gai_misc.h and ga_test.c.
	(routines): Add gai_sigqueue.
	(extra-libs): Add libanl.
	(libanl-routines): New variable.
	Add rules to build libanl and ga_test.
	* resolv/Versions [libc] (GLIBC_2.2.3): Add __gai_sigqueue.
	[libanl]: New library.
	* resolv/netdb.h: Add definitions for libanl.
	* resolv/getaddrinfo_a.c: New file.
	* resolv/gai_cancel.c: New file.
	* resolv/gai_error.c: New file.
	* resolv/gai_misc.c: New file.
	* resolv/gai_misc.h: New file.
	* resolv/gai_notify.c: New file.
	* resolv/gai_suspend.c: New file.
	* resolv/ga_test.c: New file.
	* sysdeps/generic/gai_sigqueue.c: New file.
	* sysdeps/unix/sysv/linux/gai_sigqueue.c: New file.
	* sysdeps/generic/bits/siginfo.h: Allow __need_sigevent_t being defined
	and provide only that definition.
	* sysdeps/unix/sysv/linux/alpha/bits/siginfo.h: Likewise.
	* sysdeps/unix/sysv/linux/bits/siginfo.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/bits/siginfo.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/bits/siginfo.h: Likewise.

	* rt/aio_misc.c: Fix typos in comments.
	* rt/lio_listio.c: Pretty printing.  Little optimization in request
	list handling.

	* elf/rtld.c: Remove commented out code.
2001-03-03 18:21:04 +00:00