This updates glibc for the changes in the ELFv2 relating to the
stack frame layout. These are described in more detail here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01149.htmlhttp://gcc.gnu.org/ml/gcc-patches/2013-11/msg01146.html
Specifically, the "compiler and linker doublewords" were removed,
which has the effect that the save slot for the TOC register is
now at offset 24 rather than 40 to the stack pointer.
In addition, a function may now no longer necessarily assume that
its caller has set up a 64-byte register save area its use.
To address the first change, the patch goes through all assembler
files and replaces immediate offsets in instructions accessing the
ABI-defined stack slots by symbolic offsets. Those already were
defined in ucontext_i.sym and used in some of the context routines,
but that doesn't really seem like the right place for those defines.
The patch instead defines those symbolic offsets in sysdeps.h,
in two variants for the old and new ABI, and uses them systematically
in all assembler files, not just the context routines.
The second change only affected a few assembler files that used
the save area to temporarily store some registers. In those
cases where this happens within a leaf function, this patch
changes the code to store those registers to the "red zone"
below the stack pointer. Otherwise, the functions already allocate
a stack frame, and the patch changes them to add extra space in
these frames as temporary space for the ELFv2 ABI.
This patch adds support for the ELFv2 ABI feature to remove function
descriptors. See this GCC patch for in-depth discussion:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01141.html
This mostly involves two types of changes: updating assembler source
files to the new logic, and updating the dynamic loader.
After the refactoring in the previous patch, most of the assembler source
changes can be handled simply by providing ELFv2 versions of the
macros in sysdep.h. One somewhat non-obvious change is in __GI__setjmp:
this used to "fall through" to the immediately following __setjmp ENTRY
point. This is no longer safe in the ELFv2 since ENTRY defines both
a global and a local entry point, and you cannot simply fall through
to a global entry point as it requires r12 to be set up.
Also, makecontext needs to be updated to set up registers according to
the new ABI for calling into the context's start routine.
The dynamic linker changes mostly consist of removing special code
to handle function descriptors. We also need to support the new PLT
and glink format used by the the ELFv2 linker, see:
https://sourceware.org/ml/binutils/2013-10/msg00376.html
In addition, the dynamic linker now verifies that the dynamic libraries
it loads match its own ABI.
The hack in VDSO_IFUNC_RET to "synthesize" a function descriptor
for vDSO routines is also no longer necessary for ELFv2.
http://sourceware.org/ml/libc-alpha/2013-08/msg00089.html
Little-endian fixes for setjmp/longjmp. When writing these I noticed
the setjmp code corrupts the non volatile VMX registers when using an
unaligned buffer. Anton fixed this, and also simplified it quite a
bit.
The current code uses boilerplate for the case where we want to store
16 bytes to an unaligned address. For that we have to do a
read/modify/write of two aligned 16 byte quantities. In our case we
are storing a bunch of back to back data (consective VMX registers),
and only the start and end of the region need the read/modify/write.
[BZ #15723]
* sysdeps/powerpc/jmpbuf-offsets.h: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Correct
_dl_hwcap access for little-endian.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise. Don't
destroy vmx regs when saving unaligned.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Correct CR load.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Likewise CR save. Don't
destroy vmx regs when saving unaligned.
value doesn't survive in a registers when the function returns.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
PTR_MANGLE2.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define
PTR_MANGLE2 and PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Use PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Use PTR_MANGLE2.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Ulrich Drepper <drepper@redhat.com>
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Make no_vmx and
aligned_save_vmx symbol local.
Update.
2004-07-16 Steven Munroe <sjmunroe@us.ibm.com>
[BZ #269]
* setjmp/Makefile (tests): Add bug269-setjmp.
* setjmp/bug269-setjmp.c: New file.
* sysdeps/powerpc/powerpc64/__longjmp-common.S [SHARED && !IS_IN_rtld]:
Store R2 from jmpbuf in callers TOC save area.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S [SHARED && !IS_IN_rtld]:
Store R2 in TOC save area.
* sysdeps/powerpc/powerpc64/setjmp-common.S [SHARED && !IS_IN_rtld]:
Copy TOC save area from previous frame as R2 (TOC) in jmpbuf.
2004-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc64/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/__longjmp-common.S: New File
* sysdeps/powerpc/powerpc32/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/Dist: New File.
* sysdeps/powerpc/Makefile (sysdep_routines): Add novmx-longjmp.c
and novmx-sigjmp.c
* sysdeps/powerpc/Versions (libc): To GLIBC_2.3_4 add _longjmp,
__sigsetjmp, _setjmp, longjmp, and setjmp. To GLIBC_PRIVATE add
__novmx__libc_longjmp, __novmx__libc_siglongjmp, __vmx__libc_longjmp,
and __vmx__libc_siglongjmp.
* sysdeps/powerpc/bits/setjmp.h: Define JB_VRSAVE, JB_VRS, and adjust
JB_SIZE to add VMX regs to __jmp_buf.
* sysdeps/powerpc/longjmp.c: New file.
* sysdeps/powerpc/novmxsetjmp.h: New file.
* sysdeps/powerpc/novmx-longjmp.c: New file.
* sysdeps/powerpc/novmx-sigjmp.c: New file.
* sysdeps/powerpc/sigjmp.c: New file.
