This patch consolidates all Linux lseek/lseek64/llseek implementation
in on on sysdeps/unix/sysv/linux/lseek{64}.c. It also removes the llseek
file and instead consolidate the LFS lseek implementation on lseek64.c
as for other LFS symbols implementations.
The general idea is:
- lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable
use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek.
ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol.
- lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek
(since it will use 64-bit arguments without low/high splitting) and
__NR__llseek if __NR_lseek is not defined (for some ILP32 ports).
- llseek: files will be removed and symbols will be aliased ot lseek64.
ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32
so far) are covered by building lseek with off_t as expected and lseek64
using __NR_lseek (as expected for off64_t being passed using 64-bit registers).
For this consolidation I mantained the x32 assembly specific implementation
because to correctly fix this it would required both the x32 fix for
{INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to
return 64 bits instead of default 32 bits (as for times). It could a future
cleanup.
It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2],
although it is mainly for simplification.
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* nptl/Makefile (libpthread-routines): Remove ptw-llseek and add
ptw-lseek64.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek.
* sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines):
Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise.
* sysdeps/unix/sysv/linux/llseek.c: Remove file.
* sysdeps/unix/sysv/linux/lseek.c: New file.
* sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and
__libc_lseek64 from auto-generation.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file.
[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html
[2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
This patch correctly enable and disable asynchronous cancellation on
Linux posix_spawn. Current code invert the logic by enabling and
disabling instead. It also adds a new test to check if posix_spawn
is not a cancellation entrypoint.
Checked on x86_64, i686, powerpc64le, and aarch64.
* nptl/Makefile (tests): Add tst-exec5.
* nptl/tst-exec5.c: New file.
* sysdeps/unix/sysv/linux/spawni.c (__spawni): Correctly enable and disable
asynchronous cancellation.
This patch changes sem_open to not act as a cancellation point.
Cancellation is disable at start and reenable in function exit.
It fixes BZ #15765.
Tested on x86_64 and i686.
[BZ #15765]
* nptl/Makefile (tests): Add tst-sem16.
* nptl/tst-sem16.c: New file.
* nptl/sem_open.c (sem_open): Disable asynchronous cancellation.
Nothing depends on the PTW macro anymore, so the mechanism to define
PTW for recompliations of libc routines is no longer needed. The
source files are still recompiled for the nptl directory, just without
the “ptw-” prefix.
(Reducing the number of pattern rules in sysd-rules is critical for
improving make performance.)
Instead, call malloc and explicitly align the pointer.
There is no external location to store the original (unaligned)
pointer, and this commit increases the allocation size to store
the pointer at a fixed location relative to the TCB pointer.
The manual alignment means that some space goes unused which
was previously made available for subsequent allocations.
However, in the TLS_DTV_AT_TP case, the manual alignment code
avoids aligning the pre-TCB to the TLS block alignment. (Even
while using memalign, the allocation had some unused padding
in front.)
This concludes the removal of memalign calls from the TLS code,
and the new tst-tls3-malloc test verifies that only core malloc
routines are used.
This reverts commit 62ce266b0b.
The change is not mature enough because it needs the following fixes:
1. Redirect test output to a file like other tests
2. Eliminate the need to use a .gdbinit because distributions will
break without it. I should have caught that but I was in too much
of a hurry to get the patch in :/
3. Feature checking during configure to determine things like minimum
required gdb version, python-pexpect version, etc. to make sure
that tests work correctly.
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were manually tested on both
the gdb CLI and Eclipse CDT.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both a native build and a cross build using a Beaglebone
Black, with the build system's filesystem shared with the board through NFS.
Finally, I've written a README that explains all this and more.
Hopefully this should be good to go in now. Thanks.
ChangeLog:
2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com>
* Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds
if tests-need-hardcoded-path is defined.
(all-subdirs): Add pretty-printers.
* Makerules ($(py-const)): New rule.
* Rules (others): Add $(py-const), if defined.
* nptl/Makefile (gen-py-const-headers): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* pretty-printers/Makefile: Likewise.
* pretty-printers/README: Likewise.
* pretty-printers/test-condvar-attributes.c: Likewise.
* pretty-printers/test-condvar-attributes.p: Likewise.
* pretty-printers/test-condvar-printer.c: Likewise.
* pretty-printers/test-condvar-printer.py: Likewise.
* pretty-printers/test-mutex-attributes.c: Likewise.
* pretty-printers/test-mutex-attributes.py: Likewise.
* pretty-printers/test-mutex-printer.c: Likewise.
* pretty-printers/test-mutex-printer.py: Likewise.
* pretty-printers/test-rwlock-attributes.c: Likewise.
* pretty-printers/test-rwlock-attributes.py: Likewise.
* pretty-printers/test-rwlock-printer.c: Likewise.
* pretty-printers/test-rwlock-printer.py: Likewise.
* pretty-printers/test_common.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
tst-cleanupx4 is linked with tst-cleanupx4.o and tst-cleanup4aux.o.
Since tst-cleanupx4.o is compiled from tst-cleanup4.c with -fexceptions,
tst-cleanup4aux.c should also be compiled with -fexceptions.
Tested on x86-64 and i686.
[BZ #18645]
* nptl/Makefile (extra-test-objs): Add tst-cleanupx4aux.o.
(test-extras): Add tst-cleanupx4aux.
(CFLAGS-tst-cleanupx4aux.c): New. Set to -fexceptions.
($(objpfx)tst-cleanupx4): Replace tst-cleanup4aux.o with
tst-cleanupx4aux.o.
* nptl/tst-cleanupx4aux.c: New file.
This patch adds cancellation tests for both sendmmsg and recvmmsg
syscalls. Since for some system configuration (x86_64/i686 on
older kernels and non-Linux platforms), the tests are added as
two independent that report as unsupported if the syscall is not
presented.
Both new tests uses the already tst-cancel4.c code, which as moved
to a common tst-cancel4-common{.c,h} files.
Tested on x86_64 and i686.
* nptl/Makefile (test): Add tst-cancel4_1 and tst-cancel4_2.
* nptl/tst-cancel4-common.c: New file.
* nptl/tst-cancel4-common.h: Likewise.
* nptl/tst-cancel4.c: Move common definitions to
tst-cancel4-common.{c,h} file.
* nptl/tst-cancel4_1.c: New test.
* nptl/tst-cancel4_2.c: New test.
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits 2f0dc39029, 222c2d7f43,
af7f7c7ec8. I decided to not revert abf29edd4a (Adjust
kernel-features.h defaults for recvmsg and sendmsg) mainly because it
does not really address the POSIX compliance original issue and also
adds some cleanups.
Tested on x86, i386, s390, s390x, aarch64, and powerpc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445
[2] https://github.com/google/sanitizers/issues/628
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and
ptw-oldsendmsg.
(CFLAGS-oldrecvmsg.c): Remove rule.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmsg.c): Add rule.
(CFLAGS-sendmsg.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg.
(CFLAGS-recvmsg.c): Remove rule.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-oldrecvmsg.c): Likewise.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmmsg.c): Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert
to kernel defined interfaces.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
(msghdr.__glibc_reserved1): Remove member.
(msghdr.__glibc_reserved2): Likewise.
(cmsghdr.__glibc_reserved1): Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file.
* sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous
version.
* sysdeps/unix/sysv/linux/recvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24):
Remove recvmsg and sendmsg.
* sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file
* sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24
version for {recv,send,recm,sendm}msg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
This patch fixes wrong/missing bits from the Fix {recv,send}{m}msg
standard compliance (BZ#16919) patches:
* nptl/Makefile sets CFLAGS-oldrecvfrom.c, but there's no such file as
oldrecvfrom.c. It should be oldsendmsg.c as defined by ChangeLog.
* sysdeps/unix/sysv/linux/hppa/Versions and
sysdeps/unix/sysv/linux/i386/Versions list a symbol recvms instead of
recvmsg at version GLIBC_2.24.
* nptl/Makefile (CFLAGS-oldrecvfrom.c): Remove rule.
(CFLAGS-oldsendmsg.c): Add rule.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Correct recvmsg symbol name.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24):
Likewise.
Error checking mutexes are not supposed to be subject to lock elision.
That would defeat the error checking nature of the mutex because lock
elision doesn't record ownership.
The previous barrier implementation did not fulfill the POSIX requirements
for when a barrier can be destroyed. Specifically, it was possible that
threads that haven't noticed yet that their round is complete still access
the barrier's memory, and that those accesses can happen after the barrier
has been legally destroyed.
The new algorithm does not have this issue, and it avoids using a lock
internally.
NPTL has tests that initializers work with various -std= options. Now
that we can rely on -std=gnu11 and -std=c11 being available, this
patch adds versions of those tests for those options.
Tested for x86_64 and x86 (testsuite).
* nptl/tst-initializers1-c11.c: New file.
* nptl/tst-initializers1-gnu11.c: Likewise.
* nptl/Makefile (tests): Add these new tests.
(CFLAGS-tst-initializers1-c11.c): New variable.
(CFLAGS-tst-initializers1-gnu11.c): Likewise.
sysdeps/nptl/configure.ac tests for forced unwind support and the C
cleanup attribute, giving errors if either is unsupported. It does
nothing beyond running those two tests.
Both the attribute, and _Unwind_GetCFA which is used in the forced
unwind test, were added in GCC 3.3. Thus these tests are long
obsolete, and this patch removes the configure fragment running them,
along with associated conditionals.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/nptl/configure.ac: Remove file.
* sysdeps/nptl/configure: Remove generated file.
* configure.ac (libc_cv_forced_unwind): Do not substitute.
* configure: Regenerated.
* config.h.in (HAVE_FORCED_UNWIND): Remove #undef.
* config.make.in (have-forced-unwind): Remove variable.
* nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
* nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise.
* nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise.
(__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code.
* nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional.
* sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
This patch pthread cancellation tests to check for failures cases
wherer the syscall cancel wrapper should both set the error and
the errno values.
Tested on i686, x86_64, x32, powerpc64le, and aarch64.
* nptl/Makefile (tests): Add tst-cancel26.c and tst-cancel27.c.
* nptl/tst-cancel26.c: New file.
* nptl/tst-cancel27.c: Likewise.
The recently introduced TLS variables in the thread-local destructor
implementation (__cxa_thread_atexit_impl) used the default GD access
model, resulting in a call to __tls_get_addr. This causes a deadlock
with recent changes to the way TLS is initialized because DTV
allocations are delayed and hence despite knowing the offset to the
variable inside its TLS block, the thread has to take the global rtld
lock to safely update the TLS offset.
This causes deadlocks when a thread is instantiated and joined inside
a destructor of a dlopen'd DSO. The correct long term fix is to
somehow not take the lock, but that will need a lot deeper change set
to alter the way in which the big rtld lock is used.
Instead, this patch just eliminates the call to __tls_get_addr for the
thread-local variables inside libc.so, libpthread.so and rtld by
building all of their units with -mtls-model=initial-exec.
There were concerns that the static storage for TLS is limited and
hence we should not be using it. Additionally, dynamically loaded
modules may result in libc.so looking for this static storage pretty
late in static binaries. Both concerns are valid when using TLSDESC
since that is where one may attempt to allocate a TLS block from
static storage for even those variables that are not IE. They're not
very strong arguments for the traditional TLS model though, since it
assumes that the static storage would be used sparingly and definitely
not by default. Hence, for now this would only theoretically affect
ARM architectures.
The impact is hence limited to statically linked binaries that dlopen
modules that in turn load libc.so, all that on arm hardware. It seems
like a small enough impact to justify fixing the larger problem that
currently affects everything everywhere.
This still does not solve the original problem completely. That is,
it is still possible to deadlock on the big rtld lock with a small
tweak to the test case attached to this patch. That problem is
however not a regression in 2.22 and hence could be tackled as a
separate project. The test case is picked up as is from Alex's patch.
This change has been tested to verify that it does not cause any
issues on x86_64.
ChangeLog:
[BZ #18457]
* nptl/Makefile (tests): New test case tst-join7.
(modules-names): New test case module tst-join7mod.
* nptl/tst-join7.c: New file.
* nptl/tst-join7mod.c: New file.
* Makeconfig (tls-model): Pass -ftls-model=initial-exec for
all translation units in libc.so, libpthread.so and rtld.
and also powerpc64 and powerpc64le. See the discussion in the thread
below for details. This change reverts the problematic bits leaving
the added test in place and marking XFAIL in anticipation of fixing
the bug in the near future.
https://sourceware.org/ml/libc-alpha/2015-07/msg00141.html
[BZ #18435]
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Revert commit ed225df3ad.
* nptl/Makefile (test-xfail-tst-once5): Define.
the initialization routine to exit by throwing an exception.
Such an execution, termed exceptional, requires call_once to
propagate the exception to its caller. A program may contain
any number of exceptional executions but only one returning
execution (which, if it exists, must be the last execution
with the same once flag).
On POSIX systems such as Linux, std::call_once is implemented
in terms of pthread_once. However, as discussed in libstdc++
bug 66146 - "call_once not C++11-compliant on ppc64le," GLIBC's
pthread_once hangs when the initialization function exits by
throwing an exception on at least arm and ppc64 (though
apparently not on x86_64). This effectively prevents call_once
from conforming to the C++ requirements since there doesn't
appear to be a thread-safe way to work around this problem in
libstdc++.
This patch changes pthread_once to handle gracefully init
functions that exit by throwing exceptions. It was successfully
tested on ppc64, ppc64le, and x86_64.
[BZ #18435]
* nptl/Makefile: Add tst-once5.cc.
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Remove macro redefinitions.
* nptl/tst-once5.cc: New test.
In commit 02657da2cf, .interp section
was removed from libpthread.so. This led to an error:
$ /lib64/libpthread.so.0
Native POSIX Threads Library by Ulrich Drepper et al
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Forced unwind support included.
Segmentation fault
(gdb) bt
#0 0x00000000000055a6 in _exit@plt ()
Unfortunately, there is no way to add a regression test for the bug
because .interp specifies the path to dynamic linker of the target
system.
[BZ #18479]
* nptl/pt-interp.c: New file.
* nptl/Makefile (libpthread-routines, libpthread-shared-only-routines):
Add pt-interp.
[$(build-shared) = yes] ($(objpfx)pt-interp.os): Depend on
$(common-objpfx)runtime-linker.h.
This adds wake-ups that would be missing if assuming that for a
non-writer-preferring rwlock, if one thread has acquired a rdlock and
does not release it, another thread will eventually acquire a rdlock too
despite concurrent write lock acquisition attempts. BZ 14958 is about
supporting this assumption. Strictly speaking, this isn't a valid
test case, but nonetheless worth supporting (see comment 7 of BZ 14958).
If we set up a rwlock to prefer writers (and disallow recursive rdlock
acquisitions), then readers will block for writers that are blocked to
acquire the lock (otherwise, readers could constantly enter and exit,
and the writer would never get the lock). However, the existing
implementation did not wake such readers when the writer timed out.
This patch adds the missing wake-up.
There's no similar case for writers being blocked on readers.
This patch removes the socket.S implementation for all ports and replace
it by a C implementation using socketcall. For ports that implement
the syscall directly, there is no change.
The patch idea is to simplify the socket function implementation that
uses the socketcall to be based on C implemetation instead of a pseudo
assembly implementation with arch specific parts. The patch then remove
the assembly implementatation for the ports which uses socketcall
(i386, microblaze, mips, powerpc, sparc, m68k, s390 and sh).
I have cross-build GLIBC for afore-mentioned ports and tested on both
i386 and ppc32 without regressions.
pthread_mutexattr_settype adds PTHREAD_MUTEX_NO_ELISION_NP to kind,
which is an internal flag that pthread_mutexattr_gettype shouldn't
expose, since pthread_mutexattr_settype wouldn't accept it.
This commit fixes semaphore destruction by either using 64b atomic
operations (where available), or by using two separate fields when only
32b atomic operations are available. In the latter case, we keep a
conservative estimate of whether there are any waiting threads in one
bit of the field that counts the number of available tokens, thus
allowing sem_post to atomically both add a token and determine whether
it needs to call futex_wake.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
pthread_atfork is already built in an extra-libs context, which gives
it NOT_IN_libc in its CPPFLAGS. Adding the same definition to CFLAGS
is pointless.
Verified that the code is unchanged on x86_64.
If a call to the set*id functions fails in a multi-threaded program,
the abort introduced in commit 13f7fe35ae
was triggered.
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
At this point, we can only abort the process because we have already
switched credentials on other threads. Returning an error would still
leave the process in an inconsistent state.
The new xtest needs root privileges to run.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
