It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The AFP feature (Alternate floating-point behavior) was added in armv8.7 and
introduced new FPCR bits.
Currently, HWCAP2_AFP bits (bit 0, 1, 2) in FPCR are preserved when fenv is
set to default environment. This is a deviation from standard behaviour.
Clear these bits when setting the fenv to default.
There is no libc API to modify the new FPCR bits. Restoring those bits matters
if the user changed them directly.
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The new asymmetric mode is available when HWCAP2_MTE3 is set (support is
available), bit2 is set in the tunable (user request per application),
and the system is configured such that the asymmetric mode is preferred over
sync or async (per-cpu system-wide setting).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On success, mq_receive() and mq_timedreceive() return the number of
bytes in the received message, so it requires to check if the value
is larger than 0.
Checked on i686-linux-gnu.
Was missing to for the multiarch build rtld-strncmp-sse4_2.os was
being built and exporting symbols:
build/glibc/string/rtld-strncmp-sse4_2.os:
0000000000000000 T __strncmp_sse42
Introduced in:
commit 11ffcacb64
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jun 21 12:10:50 2017 -0700
x86-64: Implement strcmp family IFUNC selectors in C
Was missing to for the multiarch build rtld-strcspn-sse4.os was
being built and exporting symbols:
build/glibc/string/rtld-strcspn-sse4.os:
U ___m128i_shift_right
U __strcspn_generic
0000000000000000 T __strcspn_sse42
U strlen
build/glibc/string/rtld-varshift.os:
0000000000000000 R ___m128i_shift_right
Introduced in:
commit 06e51c8f3d
Author: H.J. Lu <hongjiu.lu@intel.com>
Date: Fri Jul 3 02:48:56 2009 -0700
Add SSE4.2 support for strcspn, strpbrk, and strspn on x86-64.
Was missing to for the multiarch build rtld-memmove-ssse3.os was
being built and exporting symbols:
>$ nm string/rtld-memmove-ssse3.os
U __GI___chk_fail
0000000000000020 T __memcpy_chk_ssse3
0000000000000040 T __memcpy_ssse3
0000000000000020 T __memmove_chk_ssse3
0000000000000040 T __memmove_ssse3
0000000000000000 T __mempcpy_chk_ssse3
0000000000000010 T __mempcpy_ssse3
U __x86_shared_cache_size_half
Introduced after 2.35 in:
commit 26b2478322
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Thu Apr 14 11:47:40 2022 -0500
x86: Reduce code size of mem{move|pcpy|cpy}-ssse3
1. Remove sse2 instructions when using the avx512 or avx version.
2. Fixup some format nits in how the address offsets where aligned.
3. Use more space efficient instructions in the conditional AVX
restoral.
- vpcmpeqq -> vpcmpeqb
- cmp imm32, r; jz -> inc r; jz
4. Use `rep movsb` instead of `rep movsq`. The former is guranteed to
be fast with the ERMS flags, the latter is not. The latter also
wastes an instruction in size setup.
The primary memmove_{impl}_unaligned_erms implementations don't
interact with this function. Putting them in same file both
wastes space and unnecessarily bloats a hot code section.
Implementation wise:
1. Remove the VZEROUPPER as memset_{impl}_unaligned_erms does not
use the L(stosb) label that was previously defined.
2. Don't give the hotpath (fallthrough) to zero size.
Code positioning wise:
Move memset_{chk}_erms to its own file. Leaving it in between the
memset_{impl}_unaligned both adds unnecessary complexity to the
file and wastes space in a relatively hot cache section.
These files simply include the sysdeps/posix implementations which would
be used even in the absence of the files. They have been unnecessary
since 7b17aeda0c when nice and signal were removed from the
syscalls.list file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This maintains compatibility between <sys/mman.h> and <linux/uio.h>.
Before that, the addition of process_madvise made those two header
files incompatible. This has been observed resulting in a build
failure in LLDB's Process/Linux/NativeRegisterContextLinux_s390x.cpp
source file.
Fixes commit d19ee3473d
("linux: Add process_madvise").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When glibc is built with x86-64 ISA level v3, SSE run-time resolvers
aren't used. For x86-64 ISA level v4 build, both SSE and AVX resolvers
are unused. Check the minimum x86-64 ISA level to exclude the unused
run-time resolvers.
Add third argument to X86_ISA_CPU_FEATURES_ARCH_P macro so the runtime
CPU_FEATURES_ARCH_P check can be inverted if the
MINIMUM_X86_ISA_LEVEL is not high enough to constantly evaluate
the check.
Use this new macro to correct the backwards check in ifunc-evex.h
The function was tuned around 64-byte entry alignment and performs
better for all sizes with it.
As well different code boths where explicitly written to touch the
minimum number of cache line i.e sizes <= 32 touch only the entry
cache line.
By adding an internal alias to avoid the GOT indirection.
On some architecture, __libc_single_thread may be accessed through
copy relocations and thus it requires to update also the copies
default copy.
This is done by adding a new internal macro,
libc_hidden_data_{proto,def}, which has an addition argument that
specifies the alias name (instead of default __GI_ one).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Minor clean-up, we need to change this part in following patch, clean this up
to prevent we duplicated the change twice.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The sanity tests where meant to ensure that the default implementation
was only being built without multiarch with the exception of the
multiarch/rtld-*.S files.
The code used IS_IN (rtld) to check if the build for was for an
multiarch/rtld-*.S file which is incorrect as IS_IN (rtld) is set for
the non-multiarch build as well.
Most of these don't really matter as there was no dirty upper state
but we should generally avoid stray sse when its not needed.
The one case that really matters is in svml_d_tanh4_core_avx2.S:
blendvps %xmm0, %xmm8, %xmm7
When there was a dirty upper state.
Tested on x86_64-linux
1. Refactor files so that all implementations for in the multiarch
directory.
- Essentially moved sse2 {raw|w}memchr.S implementation to
multiarch/{raw|w}memchr-sse2.S
- The non-multiarch {raw|w}memchr.S file now only includes one of
the implementations in the multiarch directory based on the
compiled ISA level (only used for non-multiarch builds.
Otherwise we go through the ifunc selector).
2. Add ISA level build guards to different implementations.
- I.e memchr-avx2.S which is ISA level 3 will only build if
compiled ISA level <= 3. Otherwise there is no reason to include
it as we will always use one of the ISA level 4
implementations (memchr-evex{-rtm}.S).
3. Add new multiarch/rtld-{raw}memchr.S that just include the
non-multiarch {raw}memchr.S which will in turn select the best
implementation based on the compiled ISA level.
4. Refactor the ifunc selector and ifunc implementation list to use
the ISA level aware wrapper macros that allow functions below the
compiled ISA level (with a guranteed replacement) to be skipped.
- Guranteed replacement essentially means that for any ISA level
build there must be a function that the baseline of the ISA
supports. So for {raw|w}memchr.S since there is not ISA level 2
function, the ISA level 2 build still includes the ISA level
1 (sse2) function. Once we reach the ISA level 3 build, however,
{raw|w}memchr-avx2{-rtm}.S will always be sufficient so the ISA
level 1 implementation ({raw|w}memchr-sse2.S) will not be built.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
1. Factor out some of the ISA level defines in isa-level.c to
standalone header isa-level.h
2. Add new headers with ISA level dependent macros for handling
ifuncs.
Note, this file does not change any code.
Tested with and without multiarch on x86_64 for ISA levels:
{generic, x86-64-v2, x86-64-v3, x86-64-v4}
And m32 with and without multiarch.
Let's use LC_ALL=C as we do elsewhere for consistency.
Tested on s390x-ibm-linux-gnu.
See: 72bd208846
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
We already check for it in root configure.ac with AC_CHECK_TOOL. Let's
use the result.
Tested on s390x-ibm-linux-gnu.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
commit c22eb807b0
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Thu Jun 16 15:07:12 2022 -0700
x86: Rename generic functions with unique postfix for clarity
Changed the names of the strspn-c, strcspn-c, and strpbrk-c files
in a general refactor. It didn't change the include paths for the
i386 files breaking the i386 build. This commit fixes that.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
No functions are changed. It just renames generic implementations from
'{func}_sse2' to '{func}_generic'. This is just because the postfix
"_sse2" was overloaded and was used for files that had hand-optimized
sse2 assembly implementations and files that just redirected back
to the generic implementation.
Full xcheck passed on x86_64.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and JUMP_SLOT. RELATIVE has been
handled (by _ELF_DYNAMIC_DO_RELOC due to DT_RELACOUNT, or RELR), so the
switch statement only needs to handle GLOB_DAT and JUMP_SLOT.
We can drop these `#if[n]def RTLD_BOOTSTRAP` and add a large
`# ifndef RTLD_BOOTSTRAP` instead.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and JUMP_SLOT.
TLSDESC/TLS_DTPMOD/TLS_DTPREL handling can be removed. Remove
`case AARCH64_R(RELATIVE)` as well as elf_machine_rela has checked it.
Tested on aarch64-linux-gnu.
The RTLD_BOOTSTRAP branch is used to relocate ld.so itself. It only
needs to handle RELATIVE, GLOB_DAT, and the symbolic relocation type
(R_RISCV_{32,64}). NONE and IRELATIVE can be removed.
The code relies on ld.so having DT_RELACOUNT so that the RTLD_BOOTSTRAP
branch does not need handle RELATIVE. Drop this minor size
optimization for clarity.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
1. Fix incorrect lower-bound threshold in L(large_memcpy_2x).
Previously was using `__x86_rep_movsb_threshold` and should
have been using `__x86_shared_non_temporal_threshold`.
2. Avoid reloading __x86_shared_non_temporal_threshold before
the L(large_memcpy_4x) bounds check.
3. Document the second bounds check for L(large_memcpy_4x)
more clearly.
The lower-bound (16448) and upper-bound (SIZE_MAX / 16) are assumed
by memmove-vec-unaligned-erms.
The lower-bound is needed because memmove-vec-unaligned-erms unrolls
the loop aggressively in the L(large_memset_4x) case.
The upper-bound is needed because memmove-vec-unaligned-erms
right-shifts the value of `x86_non_temporal_threshold` by
LOG_4X_MEMCPY_THRESH (4) which without a bound may overflow.
The lack of lower-bound can be a correctness issue. The lack of
upper-bound cannot.
If an executable has copy relocations for extern protected data, that
can only work if the library containing the definition is built with
assumptions (a) the compiler emits GOT-generating relocations (b) the
linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
library uses its own definition directly and the executable accesses a
stale copy. Note: the GOT relocations defeat the purpose of protected
visibility as an optimization, but allow rtld to make the executable and
library use the same copy when copy relocations are present, but it
turns out this never worked perfectly.
ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has strange semantics when both
a.so and b.so define protected var and the executable copy relocates
var: b.so accesses its own copy even with GLOB_DAT. The behavior change
is from commit 62da1e3b00 (x86) and then
copied to nios2 (ae5eae7cfc) and arc
(0e7d930c4c).
Without ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA, b.so accesses the copy
relocated data like a.so.
There is now a warning for copy relocation on protected symbol since
commit 7374c02b68. It's extremely
unlikely anyone relies on the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA
behavior, so let's remove it: this removes a check in the symbol lookup
code.
This has been missing since the the ifuncs where added.
The performance of SSE4.2 is preferable to to SSE2.
Measured on Tigerlake with N = 20 runs.
Geometric Mean of all benchmarks SSE4.2 / SSE2: 0.906
Move the setting of `rep_movsb_stop_threshold` to after the tunables
have been collected so that the `rep_movsb_stop_threshold` (which
is used to redirect control flow to the non_temporal case) will
use any user value for `non_temporal_threshold` (set using
glibc.cpu.x86_non_temporal_threshold)
Refine commit 349b0441da:
1. Copy relocations for extern protected data do not work properly,
regardless whether GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is used.
It makes sense to produce a warning unconditionally.
2. Non-zero value of an undefined function symbol may break pointer
equality, but may be benign in many cases (many programs don't take the
address in the shared object then compare it with the address in the
executable). Reword the diagnostic to be clearer.
3. Remove the unneeded condition !(undef_map->l_1_needed &
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS). If the executable does
not not have GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (can only
occur in error cases), the diagnostic should be emitted as well.
When the defining shared object has
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS, report an error to apply
the intended enforcement.
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Optimizations are:
1. Reduce code size (-112 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-4k+ rodata is shared with avx2).
Result is roughly a 15-16% speedup:
Function, New Time, Old Time, New / Old
_ZGVbN4v_tanhf, 3.158, 3.749, 0.842
Optimizations are:
1. Reduce code size (-81 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata size (-32 bytes).
Result is roughly a 17-18% speedup:
Function, New Time, Old Time, New / Old
_ZGVdN8v_tanhf, 1.977, 2.402, 0.823
tanhf-avx2 and tanhf-sse4 use the same data tables so we can save
over 4kb using a shared datatable. This does increase the memory
footprint of the sse4 version (as now all the targets are 32 bytes
instead of 16), generally it seems worth the code size save.
NB: This patch doesn't do anything itself, it is setup for future
patches.
Optimizations are:
1. Reduce code size (-67 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata usage (-448 bytes).
Result is roughly a 14% speedup:
Function, New Time, Old Time, New / Old
_ZGVeN16v_tanhf, 0.649, 0.752, 0.863
Improvements are:
1. Reduce code size (-62 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Reduce rodata usage (-16 bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVbN4v_atanhf, 8.821, 8.903, 0.991
Improvements are:
1. Reduce code size (-60 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Prefer registers which get short instruction encoding.
5. Shrink rodata usage (-32 bytes).
The throughput improvement is not that significant (3-5%) as the
port 0 bottleneck is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVdN8v_atanhf, 2.799, 2.923, 0.958
Improvements are:
1. Reduce code size (-64 bytes).
2. Remove redundant move instructions.
3. Slightly improve instruction selection/scheduling where
possible.
4. Reduce rodata size ([-128, -188] bytes).
The throughput improvement is not significant as the port 0 bottleneck
is unavoidable.
Function, New Time, Old Time, New / Old
_ZGVeN16v_atanhf, 1.39, 1.408, 0.987
commit 6dcbb7d95d
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Jun 6 21:11:33 2022 -0700
x86: Shrink code size of memchr-avx2.S
Changed how the page cross case aligned string (rdi) in
rawmemchr. This was incompatible with how
`L(cross_page_continue)` expected the pointer to be aligned and
would cause rawmemchr to read data start started before the
beginning of the string. What it would read was in valid memory
but could count CHAR matches resulting in an incorrect return
value.
This commit fixes that issue by essentially reverting the changes to
the L(page_cross) case as they didn't really matter.
Test cases added and all pass with the new code (and where confirmed
to fail with the old code).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Give fall-through path to `vzeroupper` and taken-path to `vzeroall`.
Generally even on machines with RTM the expectation is the
string-library functions will not be called in transactions.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is not meant as a performance optimization. The previous code was
far to liberal in aligning targets and wasted code size unnecissarily.
The total code size saving is: 64 bytes
There are no non-negligible changes in the benchmarks.
Geometric Mean of all benchmarks New / Old: 1.000
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is not meant as a performance optimization. The previous code was
far to liberal in aligning targets and wasted code size unnecissarily.
The total code size saving is: 59 bytes
There are no major changes in the benchmarks.
Geometric Mean of all benchmarks New / Old: 0.967
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller user-arg lengths more.
2. optimizes target placement more carefully
3. reuses logic more
4. fixes up various inefficiencies in the logic. The biggest
case here is the `lzcnt` logic for checking returns which
saves either a branch or multiple instructions.
The total code size saving is: 306 bytes
Geometric Mean of all benchmarks New / Old: 0.760
Regressions:
There are some regressions. Particularly where the length (user arg
length) is large but the position of the match char is near the
beginning of the string (in first VEC). This case has roughly a
10-20% regression.
This is because the new logic gives the hot path for immediate matches
to shorter lengths (the more common input). This case has roughly
a 15-45% speedup.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller user-arg lengths more.
2. optimizes target placement more carefully
3. reuses logic more
4. fixes up various inefficiencies in the logic. The biggest
case here is the `lzcnt` logic for checking returns which
saves either a branch or multiple instructions.
The total code size saving is: 263 bytes
Geometric Mean of all benchmarks New / Old: 0.755
Regressions:
There are some regressions. Particularly where the length (user arg
length) is large but the position of the match char is near the
beginning of the string (in first VEC). This case has roughly a
20% regression.
This is because the new logic gives the hot path for immediate matches
to shorter lengths (the more common input). This case has roughly
a 35% speedup.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code:
1. prioritizes smaller lengths more.
2. optimizes target placement more carefully.
3. reuses logic more.
4. fixes up various inefficiencies in the logic.
The total code size saving is: 394 bytes
Geometric Mean of all benchmarks New / Old: 0.874
Regressions:
1. The page cross case is now colder, especially re-entry from the
page cross case if a match is not found in the first VEC
(roughly 50%). My general opinion with this patch is this is
acceptable given the "coldness" of this case (less than 4%) and
generally performance improvement in the other far more common
cases.
2. There are some regressions 5-15% for medium/large user-arg
lengths that have a match in the first VEC. This is because the
logic was rewritten to optimize finds in the first VEC if the
user-arg length is shorter (where we see roughly 20-50%
performance improvements). It is not always the case this is a
regression. My intuition is some frontend quirk is partially
explaining the data although I haven't been able to find the
root cause.
Full xcheck passes on x86_64.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The RTM vzeroupper mitigation has no way of replacing inline
vzeroupper not before a return.
This can be useful when hoisting a vzeroupper to save code size
for example:
```
L(foo):
cmpl %eax, %edx
jz L(bar)
tzcntl %eax, %eax
addq %rdi, %rax
VZEROUPPER_RETURN
L(bar):
xorl %eax, %eax
VZEROUPPER_RETURN
```
Can become:
```
L(foo):
COND_VZEROUPPER
cmpl %eax, %edx
jz L(bar)
tzcntl %eax, %eax
addq %rdi, %rax
ret
L(bar):
xorl %eax, %eax
ret
```
This code does not change any existing functionality.
There is no difference in the objdump of libc.so before and after this
patch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch does not touch any existing code and is only meant to be a
tool for future patches so that simple source files can more easily be
maintained to target multiple VEC classes.
There is no difference in the objdump of libc.so before and after this
patch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
__strncpy_power9 initializes VR 18 with zeroes to be used throughout the
code, including when zero-padding the destination string. However, the
v18 reference was mistakenly being used for stxv and stxvl, which take a
VSX vector as operand. The code ended up using the uninitialized VSR 18
register by mistake.
Both occurrences have been changed to use the proper VSX number for VR 18
(i.e. VSR 50).
Tested on powerpc, powerpc64 and powerpc64le.
Signed-off-by: Kewen Lin <linkw@gcc.gnu.org>
Add an initial SVE memcpy implementation. Copies up to 32 bytes use SVE
vectors which improves the random memcpy benchmark significantly.
Cleanup the memcpy and memmove ifunc selectors.
Adding a 512-bit EVEX version of strstr. The algorithm works as follows:
(1) We spend a few cycles at the begining to peek into the needle. We
locate an edge in the needle (first occurance of 2 consequent distinct
characters) and also store the first 64-bytes into a zmm register.
(2) We search for the edge in the haystack by looking into one cache
line of the haystack at a time. This avoids having to read past a page
boundary which can cause a seg fault.
(3) If an edge is found in the haystack we first compare the first
64-bytes of the needle (already stored in a zmm register) before we
proceed with a full string compare performed byte by byte.
Benchmarking results: (old = strstr_sse2_unaligned, new = strstr_avx512)
Geometric mean of all benchmarks: new / old = 0.66
Difficult skiptable(0) : new / old = 0.02
Difficult skiptable(1) : new / old = 0.01
Difficult 2-way : new / old = 0.25
Difficult testing first 2 : new / old = 1.26
Difficult skiptable(0) : new / old = 0.05
Difficult skiptable(1) : new / old = 0.06
Difficult 2-way : new / old = 0.26
Difficult testing first 2 : new / old = 1.05
Difficult skiptable(0) : new / old = 0.42
Difficult skiptable(1) : new / old = 0.24
Difficult 2-way : new / old = 0.21
Difficult testing first 2 : new / old = 1.04
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Newer versions of GNU grep (after grep 3.7, not inclusive) will warn on
'egrep' and 'fgrep' invocations.
Convert usages within the tree to their expanded non-aliased counterparts
to avoid irritating warnings during ./configure and the test suite.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This definition is only used as a fallback with old kernel headers.
The change follows kernel commit bfdf4e6208051ed7165b2e92035b4bf11
("rseq: Remove broken uapi field layout on 32-bit little endian").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
LoongArch is going to be the first architecture supported by Linux that
has neither fstat* nor newfstatat [1], instead exclusively relying on
statx. So in fstatat64's implementation, we need to also enable statx
usage if neither fstatat64 nor newfstatat is present, to prepare for
this new case of kernel ABI.
[1]: https://lore.kernel.org/all/20220518092619.1269111-1-chenhuacai@loongson.cn/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.18 adds a constant MADV_DONTNEED_LOCKED (defined in multiple
header files, but with the same value on all architectures). Add this
constant to bits/mman-linux.h.
Tested for x86_64.
Linux 5.18 defines a new AArch64 HWCAP value HWCAP2_MTE3; add it to
glibc's sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
The compiler may substitute calls to sin or cos with calls to sincos, thus
we should have the same optimized implementations for sincos. The
optimized implementations may produce results that differ, that also makes
sure that the sincos call aggrees with the sin and cos calls.
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on s390x-linux-gnu and s390-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0.
The startup code is changed to read the _dl_argc and _dl_argv values,
and envp is calculated from argc and argv.
Checked on ia64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Different than other architectures, hppa creates an unrelated stack
frame where ld.so argc/argv adjustments done by ad43cac44a
is not done on the argc/argv saved/restore by _dl_start_user.
Instead load _dl_argc and _dl_argv directlty instead of adjust them
using _dl_skip_args value.
Checked on hppa-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the fixup_stack branch ununsed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the _fixup_stack branch ununsed.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the fixup_stack branch ununsed.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to x86-64 psABI, r_addend should be ignored for R_X86_64_GLOB_DAT
and R_X86_64_JUMP_SLOT. Since linkers always set their r_addends to 0, we
can ignore their r_addends.
Reviewed-by: Fangrui Song <maskray@google.com>
This patch implements following evex512 version of string functions.
Perf gain for evex512 version is up to 50% as compared to evex,
depending on length and alignment.
Placeholder function, not used by any processor at the moment.
- String length function using 512 bit vectors.
- String N length using 512 bit vectors.
- Wide string length using 512 bit vectors.
- Wide string N length using 512 bit vectors.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 5.18. (There are no new constants covered
by these tests in 5.18, or in 5.17 in the case of tst-pidfd-consts.py
that previously used version 5.16, that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 5.18 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 5.18.
Tested with build-many-glibcs.py.
In multi-threaded programs, registering via pthread_atfork,
de-registering implicitly via dlclose, or running pthread_atfork
handlers during fork was protected by an internal lock. This meant
that a pthread_atfork handler attempting to register another handler or
dlclose a dynamically loaded library would lead to a deadlock.
This commit fixes the deadlock in the following way:
During the execution of handlers at fork time, the atfork lock is
released prior to the execution of each handler and taken again upon its
return. Any handler registrations or de-registrations that occurred
during the execution of the handler are accounted for before proceeding
with further handler execution.
If a handler that hasn't been executed yet gets de-registered by another
handler during fork, it will not be executed. If a handler gets
registered by another handler during fork, it will not be executed
during that particular fork.
The possibility that handlers may now be registered or deregistered
during handler execution means that identifying the next handler to be
run after a given handler may register/de-register others requires some
bookkeeping. The fork_handler struct has an additional field, 'id',
which is assigned sequentially during registration. Thus, handlers are
executed in ascending order of 'id' during 'prepare', and descending
order of 'id' during parent/child handler execution after the fork.
Two tests are included:
* tst-atfork3: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This test exercises calling dlclose from prepare, parent, and child
handlers.
* tst-atfork4: This test exercises calling pthread_atfork and dlclose
from the prepare handler.
[BZ #24595, BZ #27054]
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
This reverts commit 0910702c4d.
Say both a.so and b.so define protected data symbol `var` and the executable
copy relocates var. ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has strange
semantics: a.so accesses the copy in the executable while b.so accesses its
own. This behavior requires that (a) the compiler emits GOT-generating
relocations (b) the linker produces GLOB_DAT instead of RELATIVE.
Without the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA code, b.so's GLOB_DAT
will bind to the executable (normal behavior).
For aarch64 it makes sense to restore the original behavior and don't
pay the ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA cost. The behavior is very
unlikely used by anyone.
* Clang code generator treats STV_PROTECTED the same way as STV_HIDDEN:
no GOT-generating relocation in the first place.
* gold and lld reject copy relocation on a STV_PROTECTED symbol.
* Nowadays -fpie/-fpic modes are popular. GCC/Clang's codegen uses
GOT-generating relocation when accessing an default visibility
external symbol which avoids copy relocation.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Unroll slightly and enforce good instruction scheduling. This improves
performance on out-of-order machines. The unrolling allows for
pipelined multiplies.
As well, as an optional sysdep, reorder the operations and prevent
reassosiation for better scheduling and higher ILP. This commit
only adds the barrier for x86, although it should be either no
change or a win for any architecture.
Unrolling further started to induce slowdowns for sizes [0, 4]
but can help the loop so if larger sizes are the target further
unrolling can be beneficial.
Results for _dl_new_hash
Benchmarked on Tigerlake: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
Time as Geometric Mean of N=30 runs
Geometric of all benchmark New / Old: 0.674
type, length, New Time, Old Time, New Time / Old Time
fixed, 0, 2.865, 2.72, 1.053
fixed, 1, 3.567, 2.489, 1.433
fixed, 2, 2.577, 3.649, 0.706
fixed, 3, 3.644, 5.983, 0.609
fixed, 4, 4.211, 6.833, 0.616
fixed, 5, 4.741, 9.372, 0.506
fixed, 6, 5.415, 9.561, 0.566
fixed, 7, 6.649, 10.789, 0.616
fixed, 8, 8.081, 11.808, 0.684
fixed, 9, 8.427, 12.935, 0.651
fixed, 10, 8.673, 14.134, 0.614
fixed, 11, 10.69, 15.408, 0.694
fixed, 12, 10.789, 16.982, 0.635
fixed, 13, 12.169, 18.411, 0.661
fixed, 14, 12.659, 19.914, 0.636
fixed, 15, 13.526, 21.541, 0.628
fixed, 16, 14.211, 23.088, 0.616
fixed, 32, 29.412, 52.722, 0.558
fixed, 64, 65.41, 142.351, 0.459
fixed, 128, 138.505, 295.625, 0.469
fixed, 256, 291.707, 601.983, 0.485
random, 2, 12.698, 12.849, 0.988
random, 4, 16.065, 15.857, 1.013
random, 8, 19.564, 21.105, 0.927
random, 16, 23.919, 26.823, 0.892
random, 32, 31.987, 39.591, 0.808
random, 64, 49.282, 71.487, 0.689
random, 128, 82.23, 145.364, 0.566
random, 256, 152.209, 298.434, 0.51
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
To check for the pidfd functions pidfd_open, pidfd_getfd, pid_send_signal,
and waitid with P_PIDFD.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.4 (3695eae5fee0605f316fbaad0b9e3de791d7dfaf)
to extend waitid to wait on pidfd.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
A separate asm file is easier to maintain than a macro that expands to
inline asm.
The RTLD_START macro is only needed now because _dl_start is local in
rtld.c, but _start has to call it, if _dl_start was made hidden then it
could be empty.
_dl_skip_args is no longer needed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is for bug 23293 and it relies on the glibc test system running
tests via explicit ld.so invokation by default.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When an executable is invoked as
./ld.so [ld.so-args] ./exe [exe-args]
then the argv is adujusted in ld.so before calling the entry point of
the executable so ld.so args are not visible to it. On most targets
this requires moving argv, env and auxv on the stack to ensure correct
stack alignment at the entry point. This had several issues:
- The code for this adjustment on the stack is written in asm as part
of the target specific ld.so _start code which is hard to maintain.
- The adjustment is done after _dl_start returns, where it's too late
to update GLRO(dl_auxv), as it is already readonly, so it points to
memory that was clobbered by the adjustment. This is bug 23293.
- _environ is also wrong in ld.so after the adjustment, but it is
likely not used after _dl_start returns so this is not user visible.
- _dl_argv was updated, but for this it was moved out of relro, which
changes security properties across targets unnecessarily.
This patch introduces a generic _dl_start_args_adjust function that
handles the argument adjustments after ld.so processed its own args
and before relro protection is applied.
The same algorithm is used on all targets, _dl_skip_args is now 0, so
existing target specific adjustment code is no longer used. The bug
affects aarch64, alpha, arc, arm, csky, ia64, nios2, s390-32 and sparc,
other targets don't need the change in principle, only for consistency.
The GNU Hurd start code relied on _dl_skip_args after dl_main returned,
now it checks directly if args were adjusted and fixes the Hurd startup
data accordingly.
Follow up patches can remove _dl_skip_args and DL_ARGV_NOT_RELRO.
Tested on aarch64-linux-gnu and cross tested on i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
Currently on Linux __get_nprocs_conf first tries to enumerate the
cpus present in the system by iterating on /sys/devices/system/cpuX
directories. This only enumerates the CPUs that are present in
system (but possibly offline), not taking in account possible CPU
that might added in the system through hotplugging.
Linux provides the maximum number of configured cpus on the
/sys/devices/system/cpu file. Although it might present a larger
value of possible active CPUs on some system (where kernel either
get the information from firmaware or is configured at boot time),
the information is what kernel presents to userland.
This also change the returned value of _SC_NPROCESSORS_CONF, which
aligns as the maximum configure cpu in the system.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both symbols are marked as legacy in POSIX.1-2001 and removed on
POSIX.1-2008, although the prototypes are defined for _GNU_SOURCE
or _DEFAULT_SOURCE.
GCC also replaces bcopy with a memmove and bzero with memset on default
configuration (to actually get a bzero libc call the code requires
to omit string.h inclusion and built with -fno-builtin), so it is
highly unlikely programs are actually calling libc bzero symbol.
On a recent Linux distro (Ubuntu 22.04), there is no bzero calls
by the installed binaries.
$ cat count_bstring.sh
#!/bin/bash
files=`IFS=':';for i in $PATH; do test -d "$i" && find "$i" -maxdepth 1 -executable -type f; done`
total=0
for file in $files; do
symbols=`objdump -R $file 2>&1`
if [ $? -eq 0 ]; then
ncalls=`echo $symbols | grep -w $1 | wc -l`
((total=total+ncalls))
if [ $ncalls -gt 0 ]; then
echo "$file: $ncalls"
fi
fi
done
echo "TOTAL=$total"
$ ./count_bstring.sh bzero
TOTAL=0
Checked on x86_64-linux-gnu.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Similarly use AC_MSG_ERROR for error handling rather than the internal
undocumented `as_fn_error' variable. Switch to using 1 as the exit code
as it makes no sense to refer $? in the contexts involved, it's not a
command failure handled there.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.
Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling. Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
And keep the previous definition if it exists. This allows
disabling IA64_USE_NEW_STUB while keeping USE_DL_SYSINFO defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike MMAP_CALL, this avoids a TCB dependency for an errno update
on failure.
<mmap_internal.h> cannot be included as is on several architectures
due to the definition of page_unit, so introduce a separate header
file for the definition of MMAP_CALL and MMAP_CALL_INTERNAL,
<mmap_call.h>.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These failures were caught while building glibc master for Fedora
Rawhide which is built with '-mtune=generic -msse2 -mfpmath=sse'
using gcc 11.3 (gcc-11.3.1-2.fc35) on a Cascadelake Intel Xeon
processor.
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.755
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.832
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The new code unrolls the main loop slightly without adding too much
overhead and minimizes the comparisons for the search CHAR.
Geometric Mean of all benchmarks New / Old: 0.741
See email for all results.
Full xcheck passes on x86_64 with and without multiarch enabled.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
m68k is a non-PI_STATIC_AND_HIDDEN arch which uses a GOT relocation when
loading the address of a jump table. The GOT load may be reordered
before processing R_68K_RELATIVE relocations, leading to an
unrelocated/incorrect jump table, which will cause a crash.
The foolproof approach is to add an optimization barrier (e.g. calling
an non-inlinable function after relative relocations are resolved). That
is non-trivial given the current code structure, so just use the simple
approach to avoid the jump table: handle only the essential reloctions
for RTLD_BOOTSTRAP code.
This is based on Andreas Schwab's patch and fixed ld.so crash on m68k.
Reviewed-by: Adheemrval Zanella <adhemerval.zanella@linaro.org>
commit 8804157ad9
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Fri Apr 15 12:27:59 2022 -0500
x86: Optimize memcmp SSE2 in memcmp.S
Only defined wmemcmp and missed __wmemcmp. This commit fixes that by
defining __wmemcmp and setting wmemcmp as a weak alias to __wmemcmp.
Both multiarch and disable-multiarch builds succeed and full xchecks
pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
After 73fc4e28b9,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Code didn't actually use any sse4 instructions since `ptest` was
removed in:
commit 2f9062d717
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Nov 10 16:18:56 2021 -0600
x86: Shrink memcmp-sse4.S code size
The new memcmp-sse2 implementation is also faster.
geometric_mean(N=20) of page cross cases SSE2 / SSE4: 0.905
Note there are two regressions preferring SSE2 for Size = 1 and Size =
65.
Size = 1:
size, align0, align1, ret, New Time/Old Time
1, 1, 1, 0, 1.2
1, 1, 1, 1, 1.197
1, 1, 1, -1, 1.2
This is intentional. Size == 1 is significantly less hot based on
profiles of GCC11 and Python3 than sizes [4, 8] (which is made
hotter).
Python3 Size = 1 -> 13.64%
Python3 Size = [4, 8] -> 60.92%
GCC11 Size = 1 -> 1.29%
GCC11 Size = [4, 8] -> 33.86%
size, align0, align1, ret, New Time/Old Time
4, 4, 4, 0, 0.622
4, 4, 4, 1, 0.797
4, 4, 4, -1, 0.805
5, 5, 5, 0, 0.623
5, 5, 5, 1, 0.777
5, 5, 5, -1, 0.802
6, 6, 6, 0, 0.625
6, 6, 6, 1, 0.813
6, 6, 6, -1, 0.788
7, 7, 7, 0, 0.625
7, 7, 7, 1, 0.799
7, 7, 7, -1, 0.795
8, 8, 8, 0, 0.625
8, 8, 8, 1, 0.848
8, 8, 8, -1, 0.914
9, 9, 9, 0, 0.625
Size = 65:
size, align0, align1, ret, New Time/Old Time
65, 0, 0, 0, 1.103
65, 0, 0, 1, 1.216
65, 0, 0, -1, 1.227
65, 65, 0, 0, 1.091
65, 0, 65, 1, 1.19
65, 65, 65, -1, 1.215
This is because A) the checks in range [65, 96] are now unrolled 2x
and B) because smaller values <= 16 are now given a hotter path. By
contrast the SSE4 version has a branch for Size = 80. The unrolled
version has get better performance for returns which need both
comparisons.
size, align0, align1, ret, New Time/Old Time
128, 4, 8, 0, 0.858
128, 4, 8, 1, 0.879
128, 4, 8, -1, 0.888
As well, out of microbenchmark environments that are not full
predictable the branch will have a real-cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
New code save size (-303 bytes) and has significantly better
performance.
geometric_mean(N=20) of page cross cases New / Original: 0.634
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The loader does not need to pull all __get_errlist definitions
and its size is decreased:
Before:
$ size elf/ld.so
text data bss dec hex filename
197774 11024 456 209254 33166 elf/ld.so
After:
$ size elf/ld.so
text data bss dec hex filename
191510 9936 456 201902 314ae elf/ld.so
Checked on x86_64-linux-gnu.
The goal is to remove most SSSE3 function as SSE4, AVX2, and EVEX are
generally preferable. memcpy/memmove is one exception where avoiding
unaligned loads with `palignr` is important for some targets.
This commit replaces memmove-ssse3 with a better optimized are lower
code footprint verion. As well it aliases memcpy to memmove.
Aside from this function all other SSSE3 functions should be safe to
remove.
The performance is not changed drastically although shows overall
improvements without any major regressions or gains.
bench-memcpy geometric_mean(N=50) New / Original: 0.957
bench-memcpy-random geometric_mean(N=50) New / Original: 0.912
bench-memcpy-large geometric_mean(N=50) New / Original: 0.892
Benchmarks where run on Zhaoxin KX-6840@2000MHz See attached numbers
for all results.
More important this saves 7246 bytes of code size in memmove an
additional 10741 bytes by reusing memmove code for memcpy (total 17987
bytes saves). As well an additional 896 bytes of rodata for the jump
table entries.
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Some Linux interfaces never restart after being interrupted by a signal
handler, regardless of the use of SA_RESTART [1]. It means that for
pthread cancellation, if the target thread disables cancellation with
pthread_setcancelstate and calls such interfaces (like poll or select),
it should not see spurious EINTR failures due the internal SIGCANCEL.
However recent changes made pthread_cancel to always sent the internal
signal, regardless of the target thread cancellation status or type.
To fix it, the previous semantic is restored, where the cancel signal
is only sent if the target thread has cancelation enabled in
asynchronous mode.
The cancel state and cancel type is moved back to cancelhandling
and atomic operation are used to synchronize between threads. The
patch essentially revert the following commits:
8c1c0aae20 nptl: Move cancel type out of cancelhandling
2b51742531 nptl: Move cancel state out of cancelhandling
26cfbb7162 nptl: Remove CANCELING_BITMASK
However I changed the atomic operation to follow the internal C11
semantic and removed the MACRO usage, it simplifies a bit the
resulting code (and removes another usage of the old atomic macros).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
and powerpc64-linux-gnu.
[1] https://man7.org/linux/man-pages/man7/signal.7.html
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
The new IBM z16 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented.
_dl_hwcaps_subdir is extended by "z16" if HWCAP_S390_VXRS_PDE2
is set. HWCAP_S390_NNPA is not tested in _dl_hwcaps_subdirs_active
as those instructions may be replaced or removed in future.
tst-glibc-hwcaps.c is extended in order to test z16 via new marker5.
A fatal glibc error is dumped if glibc was build with architecture
level set for z16, but run on an older machine. (See dl-hwcap-check.h)
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
The 32-bit and 64-bit variants of RISC-V share the same name - "RISC-V"
- when generating the libm error table for the info pages. This
collision, and the way how the table is generated, mean that the values
in the final table for "RISC-V" may be either for the 32- or 64-bit
variant, with no indication as to which.
As an additional side-effect, this makes the build non-reproducible, as
the error table generated is dependent upon the host filesystem
implementation.
To solve this issue, the libm-test-ulps-name files for both variants
have been modified to include their word size, so as to remove the
collision and provide more accurate information in the table.
An alternative proposed was to merge the two variants' ULP values into a
single file, but this would mean that information about error values is
lost, as the two variants are not identical. Some differences are
considerable, notably the values for the exp() function are large.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
libgcc ifunc resolvers that access hwcap via a field in the tcb can't
be called until the thread pointer is set up. Other ifunc resolvers
might need access to at_platform. This patch sets up a fake thread
pointer early to a copy of tcbhead_t. hwcapinfo.c already had local
variables for hwcap and at_platform, replace them with an entire
tcbhead_t. It's not that large and this way we easily ensure hwcap
and at_platform are at the same relative offsets as they are in the
real thread block.
The patch also conditionally disables part of tst-tlsifunc-static,
"bar address read from IFUNC resolver is incorrect". We can't get a
proper address for a thread variable before glibc initialises tls.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The PowerPC64 linker edits medium model toc-indirect code to toc-pointer
relative:
addis r9,r2,tc_entry_for_var@toc@ha
ld r9,tc_entry_for_var@toc@l(r9)
becomes
addis r9,r2,(var-.TOC.)@ha
addi r9,r9,(var-.TOC.)@l
when "var" is known to be local to the binary. This isn't done for
small-model toc-indirect code, because "var" is almost guaranteed to
be too far away from .TOC. for a 16-bit signed offset. And, because
the analysis of which .toc entry can be removed becomes much more
complicated in objects that mix code models, they aren't removed if
any small-model toc sequence appears in an object file.
Unfortunately, glibc's build of ld.so smashes the needed objects
together in a ld -r linking stage. This means the GOT/TOC is left
with a whole lot of relative relocations which is untidy, but in
itself is not a serious problem. However, static-pie on powerpc64
bombs due to a segfault caused by one of the small-model accesses
before _dl_relocate_static_pie. (The very first one in rcrt1.o
passing start_addresses in r8 to __libc_start_main.)
So this patch makes all the toc/got accesses in assembly medium code
model, and a couple of functions hidden. By itself this is not
enough to give us working static-pie, but it is useful in isolation to
enable better linker optimisation.
There's a serious problem in libgcc too. libgcc ifuncs access the
AT_HWCAP words stored in the tcb with an offset from the thread
pointer (r13), but r13 isn't set at the time _dl_relocate_static_pie.
A followup patch will fix that.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Compilers may decide to put the rfv variable in .data rather than on
the stack. It's slightly better to put it in .data.rel.ro.local
instead. Regardles of that, making it const may enable further
optimisations. Found when examining relative relocations (GOT ones
in particular) as part of enabling static-pie for PowerPC64.
The __closefrom_fallback tries to get a available file descriptor
if the initial open ("/proc/self/fd/", ...) fails. It assumes the
failure would be only if procfs is not mount (ENOENT), however if
the the proc file is not accessible (due some other kernel filtering
such apparmor) it will iterate over a potentially large file set
issuing close calls.
It should only try the close fallback if open returns EMFILE,
ENFILE, or ENOMEM.
Checked on x86_64-linux-gnu.
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For sparc64 is the same as the generic implementation, while for
sparc32 the builtin generates the same code.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Just a few QOL changes.
1. Prefer `add` > `lea` as it has high execution units it can run
on.
2. Don't break macro-fusion between `test` and `jcc`
3. Reduce code size by removing gratuitous padding bytes (-90
bytes).
geometric_mean(N=20) of all benchmarks New / Original: 0.959
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Just a few small QOL changes.
1. Prefer `add` > `lea` as it has high execution units it can run
on.
2. Don't break macro-fusion between `test` and `jcc`
geometric_mean(N=20) of all benchmarks New / Original: 0.973
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The rational is:
1. SSE42 has nearly identical logic so any benefit is minimal (3.4%
regression on Tigerlake using SSE42 versus AVX across the
benchtest suite).
2. AVX2 version covers the majority of targets that previously
prefered it.
3. The targets where AVX would still be best (SnB and IVB) are
becoming outdated.
All in all the saving the code size is worth it.
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Slightly faster method of doing TOLOWER that saves an
instruction.
Also replace the hard coded 5-byte no with .p2align 4. On builds with
CET enabled this misaligned entry to strcasecmp.
geometric_mean(N=40) of all benchmarks New / Original: .920
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Slightly faster method of doing TOLOWER that saves an
instruction.
Also replace the hard coded 5-byte no with .p2align 4. On builds with
CET enabled this misaligned entry to strcasecmp.
geometric_mean(N=40) of all benchmarks New / Original: .894
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Overflow case for __wcsncmp_avx2_rtm should be __wcscmp_avx2_rtm not
__wcscmp_avx2.
commit ddf0992cf5
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:21 2022 -0600
x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755]
Set the wrong fallback function for `__wcsncmp_avx2_rtm`. It was set
to fallback on to `__wcscmp_avx2` instead of `__wcscmp_avx2_rtm` which
can cause spurious aborts.
This change will need to be backported.
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The generic implementation is faster.
geometric_mean(N=20) of all benchmarks New / Original: .710
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The generic implementation is faster.
geometric_mean(N=20) of all benchmarks New / Original: .678
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use _mm_cmpeq_epi8 and _mm_movemask_epi8 to get strlen instead of
_mm_cmpistri. Also change offset to unsigned to avoid unnecessary
sign extensions.
geometric_mean(N=20) of all benchmarks that dont fallback on
sse2; New / Original: .901
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use _mm_cmpeq_epi8 and _mm_movemask_epi8 to get strlen instead of
_mm_cmpistri. Also change offset to unsigned to avoid unnecessary
sign extensions.
geometric_mean(N=20) of all benchmarks that dont fallback on
sse2/strlen; New / Original: .928
All string/memory tests pass.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Small code cleanup for size: -81 bytes.
Add comment justifying using a branch to do NULL/non-null return.
All string/memory tests pass and no regressions in benchtests.
geometric_mean(N=20) of all benchmarks New / Original: .985
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Small code cleanup for size: -53 bytes.
Add comment justifying using a branch to do NULL/non-null return.
All string/memory tests pass and no regressions in benchtests.
geometric_mean(N=20) of all benchmarks Original / New: 1.00
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.17. (There are no new MAP_* constants covered by this test in
5.17 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
It is not used on rtld and ldsodef interfaces are meant to be used
solely on loader. It also removes the only usage of gcc extension
__builtin_va_arg_pack.
configure scripts need to be runnable with a POSIX-compliant /bin/sh.
On many (but not all!) systems, /bin/sh is provided by Bash, so errors
like this aren't spotted. Notably Debian defaults to /bin/sh provided
by dash which doesn't tolerate such bashisms as '=='.
This retains compatibility with bash.
Fixes configure warnings/errors like:
```
checking if compiler warns about alias for function with incompatible types... yes
/var/tmp/portage/sys-libs/glibc-2.34-r10/work/glibc-2.34/configure: 4209: test: xyes: unexpected operator
```
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Sam James <sam@gentoo.org>
The close_retry goto jump is confusing and clumsy to read, so refactor
the code a bit to make it easier to follow.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Clean up another antipattern where code flows from an if condition to
its else counterpart with a goto.
Most of the change in this patch is whitespace-only; a `git diff -b`
ought to show the actual logic changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Split out line processing for `label`, `precedence` and `scopev4` into
separate functions instead of the gotos.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
All other cases of failures due to lack of memory return EAI_MEMORY, so
it seems wrong to return EAI_SYSTEM here. The only reason
convert_hostent_to_gaih_addrtuple could fail is on calloc failure.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Simplify the loop a wee bit and clean up variable names too.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Flatten the condition nesting and replace the alloca for RET.AT/ATR with
a single array LOCAL_AT[2]. This gets rid of alloca and alloca
accounting.
`git diff -b` is probably the best way to view this change since much of
the diff is whitespace changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
The macro is quite a pain to debug, so make gethosts into a function to
make it easier to maintain.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a new member got_ipv6 to indicate if the results have an IPv6
result and use it instead of the local got_ipv6.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a free_at flag in gaih_result to indicate if res.at needs to be
freed by the caller.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Introduce the gaih_result structure and general paradigm for cleanups
that follow to process the lookup request and return a result. A lookup
function (like text_to_binary_address), should return an integer error
code and set members of gaih_result based on what it finds. If the
function does not have a result and no errors have occurred during the
lookup, it should return 0 and res.at should be set to NULL, allowing a
subsequent function to do the lookup until we run out of options.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Refactor the code to split out the service resolution code into a
separate function. Allocate the service tuples array just once to the
size of the typeproto array, thus avoiding the unnecessary pointer
chasing and stack allocations.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Use realloc in convert_hostent_to_gaih_addrtuple and fix up pointers in
the result list so that a single block is maintained for
hostbyname3_r/hostbyname2_r and freed in gaih_inet. This result is
never merged with any other results, since the hosts database does not
permit merging.
Resolves BZ #28852.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Simplify logic for allocation of canon to remove the canonbuf variable;
canon now always points to an allocated block. Also pull the canon name
set into a separate function.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Allocations for address tuples is currently a bit confusing because of
the pointer chasing through PAT, making it hard to observe the sequence
in which allocations have been made. Narrow scope of the pointer
chasing through PAT so that it is only used where necessary.
This also tightens actions behaviour with the hosts database in
getaddrinfo to comply with the manual text. The "continue" action
discards previous results and the "merge" action results in an immedate
lookup failure. Consequently, chaining of allocations across modules is
no longer necessary, thus opening up cleanup opportunities.
A test has been added that checks some combinations to ensure that they
work correctly.
Resolves: BZ #28931
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
