Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.
This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific. (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes. The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). I did *not* test a
configuration such as that in which Carlos saw failure.
* nptl/semaphore.h: Move to ...
* sysdeps/pthread/semaphore.h: ... here.
* Makefile (installed-headers): Change nptl/semaphore.h to
sysdeps/pthread/semaphore.h.
Without this, on gcc 4.8.2 the built glibc crashes when memcpy
or memset are invoked, since they call themselves recursively.
See commit 85c2e6110c for the generic inhibit_loop_to_libcall.
ldbl-128ibm uses ldbl-128 e_lgammal_r implementation as is, however some
constants definitions overflows for IBM long double range. This patch
suppress the compiler warnings until the ldbl-128ibm implementation is
fixed.
As previously discussed in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, MIPS (o32)
waitid has build warnings (now errors) because a function is declared
inline but functions with five-argument syscalls cannot be inlined for
MIPS o32.
This patch disables the -Winline warnings for waitid.c using a
MIPS-specific wrapper file. As it's whole-file disabling, there's no
point in using push and pop, so just DIAG_IGNORE_NEEDS_COMMENT is
used.
* sysdeps/unix/sysv/linux/mips/mips32/waitid.c: New file.
Building MIPS sigaction (for ABIs other than o32) fails because of
"'restore_rt' used but never defined", arising from static functions
being defined in asms and referred to from C code. There is no
corresponding -W option for that warning, so this patch uses
-Wno-error for building sigaction.c.
* sysdeps/unix/sysv/linux/mips/mips64/Makefile
[$(subdir) == signal] (CFLAGS-sigaction.c): New variable.
[$(subdir) == nptl] (CFLAGS-sigaction.c): Likewise.
Use of strftime, a C90 function, ends up bringing in wcschr, which is
not a C90 function. Although not a conformance bug (C90 reserves
wcs*), this is still contrary to glibc practice of avoiding relying on
those reservations; this patch arranges for the internal uses to use
__wcschr instead, with wcschr being a weak alias. This is more
complicated than some such patches because of the various IFUNC
definitions of wcschr (which include code redefining libc_hidden_def
in a way that involves creating __GI_wcschr manually and so also needs
to create __GI___wcschr after the change of internal uses to use
__wcschr).
Tested for x86_64 and 32-bit x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
2014-12-10 Joseph Myers <joseph@codesourcery.com>
Adhemerval Zanella <azanella@linux.vnet.ibm.com>
[BZ #17634]
* wcsmbs/wcschr.c [!WCSCHR] (wcschr): Define as __wcschr.
Undefine after defining function. Define as weak alias of
__wcschr. Use libc_hidden_weak.
* include/wchar.h (__wcschr): Declare. Use libc_hidden_proto.
* sysdeps/i386/i686/multiarch/wcschr-c.c [IS_IN (libc) && SHARED]
(libc_hidden_def): Also define __GI___wcschr alias.
* sysdeps/i386/i686/multiarch/wcschr.S (wcschr): Rename to
__wcschr and define as weak alias of __wcschr.
* sysdeps/powerpc/power6/wcschr.c [!WCSCHR] (WCSCHR): Define as
__wcschr.
[!WCSCHR] (DEFAULT_WCSCHR): Define.
[DEFAULT_WCSCHR] (__wcschr): Use libc_hidden_def.
[DEFAULT_WCSCHR] (wcschr): Define as weak alias of __wcschr. Use
libc_hidden_weak. Do not use libc_hidden_def.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c
[IS_IN (libc) && SHARED] (libc_hidden_def): Also define
__GI___wcschr alias.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c
[IS_IN (libc)] (wcschr): Define as macro expanding to
__redirect_wcschr.
[IS_IN (libc)] (__wcschr_ppc): Use __redirect_wcschr in typeof.
[IS_IN (libc)] (__wcschr_power6): Likewise.
[IS_IN (libc)] (__wcschr_power7): Likewise.
[IS_IN (libc)] (__libc_wcschr): New. Define with libc_ifunc
instead of wcschr.
[IS_IN (libc)] (wcschr): Undefine and define as weak alias of
__libc_wcschr.
[!IS_IN (libc)] (libc_hidden_def): Do not undefine and redefine.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c (wcschr): Rename to
__wcschr and define as weak alias of __wcschr. Use
libc_hidden_builtin_def.
* sysdeps/x86_64/wcschr.S (wcschr): Rename to __wcschr and define
as weak alias of __wcschr. Use libc_hidden_weak.
* time/alt_digit.c (_nl_get_walt_digit): Use __wcschr instead of
wcschr.
* time/era.c (_nl_init_era_entries): Likewise.
* conform/Makefile (test-xfail-ISO/time.h/linknamespace): Remove
variable.
(test-xfail-XPG3/time.h/linknamespace): Likewise.
(test-xfail-XPG4/time.h/linknamespace): Likewise.
Some pthreads functions use getrlimit and gettimeofday, but these
functions are XSI, not base POSIX; this is a namespace issue for
dynamic linking as well as static linking. This patch makes them use
__getrlimit and __gettimeofday instead - the former needed to be newly
exported from libc.so at GLIBC_PRIVATE (and so now needs
libc_hidden_proto / libc_hidden_def), the latter was already exported.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17682]
* resource/Versions (libc): Add __getrlimit at GLIBC_PRIVATE.
* resource/getrlimit.c (__getrlimit): Use libc_hidden_def.
* sysdeps/mach/hurd/getrlimit.c (__getrlimit): Likewise.
* include/sys/resource.h (__getrlimit): Use libc_hidden_proto.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Use
__getrlimit instead of getrlimit.
* nptl/pthread_cond_timedwait.c (__pthread_cond_timedwait): Use
__gettimeofday instead of gettimeofday.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Likewise.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Likewise.
* sysdeps/pthread/aio_misc.c (handle_fildes_io): Likewise.
* conform/Makefile (test-xfail-POSIX2008/aio.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/pthread.h/linknamespace): Likewise.
(test-xfail-POSIX2008/time.h/linknamespace): Likewise.
Various objects in glibc bring in ifaddrs.o (via references to
__netlink_*) and thereby getifaddrs and freeifaddrs, which are not
part of any standard supported by glibc. These should be weak aliases
of __getifaddrs and __freeifaddrs; this patch makes them so.
(The path by which these functions are brought in is Linux-specific,
but it seems less confusing to make all versions of these functions
weak aliases rather than only the Linux-specific versions that
definitely need it.)
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17668]
* inet/ifaddrs.c (getifaddrs): Rename to __getifaddrs and define
as weak alias of __getifaddrs. Use libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* sysdeps/gnu/ifaddrs.c (getifaddrs): Rename to __getifaddrs and
define as weak alias of __getifaddrs. Use libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/ifaddrs.c (getifaddrs): Rename to
__getifaddrs and define as weak alias of __getifaddrs. Use
libc_hidden_weak.
(freeifaddrs): Rename to __freeifaddrs and define as weak alias of
__freeifaddrs. Use libc_hidden_weak.
* conform/Makefile (test-xfail-XOPEN2K/net/if.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/net/if.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/net/if.h/linknamespace): Likewise.
Since __libc_start_main may not be in the same 256MB-aligned region as
the function __start, replace use of jal instruction with la/jalr.
This fixes linker issue reported in:
https://sourceware.org/bugzilla/show_bug.cgi?id=17601
[BZ #17601]
* sysdeps/mips/start.S (__start): Use indirect jump to call
__libc_start_main.
This patch makes the POWER7 optimized strpbrk generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 does not change.
This patch makes the POWER7 optimized strcspn generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 does not change.
This patch makes the POWER7 optimized strspn generic by using
default doubleword stores to zero the hash, instead of VSX
instructions. Performance on POWER7/POWER8 machines does not changed.
This patch optimizes strtok and strtok_r for POWERPC64.
A table of 256 characters is created and marked based on
the 'accept' argument and used to check for any occurance on
the input string.Loop unrolling is also used to gain improvements.
This patch fixes
../sysdeps/mips/__longjmp.c:27:1: warning: function declaration isn't a prototype [-Wstrict-prototypes]
which arose I think from the MIPS16 changes (renaming the function to
____longjmp with an alias __longjmp, so a prior header prototype for
__longjmp no longer sufficed to prevent a warning). I've made the
function use a prototype definition, which is what we want for all
function definitions in glibc anyway.
Tested for MIPS.
* sysdeps/mips/__longjmp.c (____longjmp): Use prototype
definition.
This patch fixes a warning
../include/features.h:328:4: warning: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Wcpp]
seen when building for ARM. This warning comes from libc-do-syscall.S
being built for nscd: the nscd build uses _FORTIFY_SOURCE, while .S
files aren't built with -O, and the combination produces a warning.
As _FORTIFY_SOURCE doesn't do anything for .S files, undefining it in
libc-do-syscall.S seems the simplest solution.
Tested for ARM.
* sysdeps/unix/sysv/linux/arm/libc-do-syscall.S (_FORTIFY_SOURCE):
Undefine.
This patch fixes bugs in ldbl-128ibm frexpl for 32-bit systems shown
up by warnings:
../sysdeps/ieee754/ldbl-128ibm/s_frexpl.c:82:4: warning: left shift count >= width of type
../sysdeps/ieee754/ldbl-128ibm/s_frexpl.c:129:5: warning: left shift count >= width of type
This did in fact show up in test-ldouble.out (alongside all the other
problems there ... maybe we should again consider running the libm
tests at finer granularity from the makefiles) as already covered by
the testsuite after the previous patch that fixed these bugs for
64-bit systems. The fix is simply using 1LL instead of 1L when
shifting by 52.
Tested for powerpc32 (soft float).
[BZ #16619]
[BZ #16740]
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Use 1LL << 52
instead of 1L << 52.
On powerpc, atomic_exchange_and_add is implemented without any
barriers. This patchs adds the missing instruction and memory barrier
for acquire and release semanthics.
Replace with IS_IN (ldconfig). No change in generated code.
* elf/Makefile (CFLAGS-ldconfig.c): Remove definition of
IS_IN_ldconfig.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Use IS_IN.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h: Likewise.
dlopening libraries from a static program would dlopen libc.so,
which thus needs its own initialization, done in posixland_init,
which was missing initializing RPCs so far.
ChangeLog:
2014-11-23 Samuel Thibault <samuel.thibault@ens-lyon.org>
* sysdeps/mach/hurd/i386/init-first.c (posixland_init): Call
__mach_init in dlopened libc.
GCC marked OABI obsolete in 4.7 and dropped it in 4.8. So the number
of people this is catching is shrinking every day. At this point,
it's not terribly useful, so just drop it.
This patch reformats the inline-asm in elf_machine_load_address so it is
easier to change only part of the inline-asm. That is using string
concatenating instead of string continuation.
Also document why this inline-asm works - it depends on the 32bit
relocation being resolved at link time.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* sysdeps/aarch64/dl-machine.h (elf_machine_load_address):
Refactor inline-asm. Also add comment.
Using the macros for ELF types is required for adding ILP32 support.
In the standard AArch64 configuration this makes no difference to
the types used.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* sysdeps/aarch64/bits/link.h (la_aarch64_gnu_pltenter): Use
ElfW macro instead of hardcoded Elf64 types.
(la_aarch64_gnu_pltenter): Likewise.
* sysdeps/aarch64/dl-machine.h
(elf_machine_runtime_setup): Use ElfW(Addr).
The latest version of the binutils ELF header defines a new set of
dynamic relocations for ILP32 and renames some to make the naming
more uniform.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* elf/elf.h (R_AARCH64_P32_ABS32, R_AARCH64_P32_COPY,
R_AARCH64_P32_GLOB_DAT, R_AARCH64_P32_JUMP_SLOT,
R_AARCH64_P32_RELATIVE, R_AARCH64_P32_TLS_DTPMOD,
R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC, R_AARCH64_P32_IRELATIVE): Define.
(R_AARCH64_TLS_DTPMOD64): Rename to ..
(R_AARCH64_TLS_DTPMOD): This.
(R_AARCH64_TLS_DTPREL64): Rename to ...
(R_AARCH64_TLS_DTPREL): This.
(R_AARCH64_TLS_TPREL64): Rename to ...
(R_AARCH64_TLS_TPREL): This.
* sysdeps/aarch64/dl-machine.h (elf_machine_type_class): Update
R_AARCH64_TLS_DTPMOD64, R_AARCH64_TLS_DTPREL64, and
R_AARCH64_TLS_TPREL64.
(elf_machine_rela): Likewise.
for ChangeLog
* sysdeps/posix/ctermid.c (ctermid): Return a pointer to a
string literal if not passed a buffer.
* manual/job.texi (ctermid): Update reasoning, note deviation
from posix, suggest mtasurace when not passed a buffer, for
future non-preliminary safety notes.
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
Remove libc-modules.h from the tree and auto-generate it from
soversions.i and the list of modules in the built-modules variable
defined in Makeconfig. Macros generated have increasing numbered
values, with built-modules having lower values starting from 1,
following which a separator value LIBS_BEGIN is added and then finally
the library names from soversions.i are appended to the list. This
allows us to conveniently differentiate between the versioned
libraries and other built modules, which is needed in errno.h and
netdb.h to decide whether to use an internal symbol or an external
one.
Verified that generated code remains unchanged on x86_64.
* Makeconfig (built-modules): List non-library modules to be
built.
(module-cppflags): Include libc-modules.h for
everything except shlib-versions.v.i.
(CPPFLAGS): Use it.
(before-compile): Add libc-modules.h.
($(common-objpfx)libc-modules.h,
$(common-objpfx)libc-modules.stmp): New targets.
(common-generated): Add libc-modules.h and libc-modules.stmp.
($(common-objpfx)Versions.v.i): Depend on libc-modules.h.
* include/libc-symbols.h: Don't include libc-modules.h.
* include/libc-modules.h: Remove file.
* scripts/gen-libc-modules.awk: New script to generate
libc-modules.h.
* sysdeps/unix/Makefile ($(common-objpfx)sysd-syscalls):
Depend on libc-modules.stmp.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
libm uses symbols mpone and mptwo for internal purposes. This patch
moves them to the implementation namespace (__mpone and __mptwo).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #17616]
* sysdeps/ieee754/dbl-64/mpa.c (mpone): Rename to __mpone.
(mptwo): Rename to __mptwo.
(__inv): Use __mptwo instead of mptwo.
* sysdeps/ieee754/dbl-64/mpa.h (mpone): Rename to __mpone.
(mptwo): Rename to __mptwo.
* sysdeps/ieee754/dbl-64/mpatan.c (__mpatan): Use __mpone instead
of mpone and __mptwo instead of mptwo.
* sysdeps/ieee754/dbl-64/mpatan2.c (__mpatan2): Use __mpone
instead of mpone.
* sysdeps/ieee754/dbl-64/mpexp.c (__mpexp): Likewise.
* sysdeps/ieee754/dbl-64/mplog.c (__mplog): Likewise.
* sysdeps/ieee754/dbl-64/sincos32.c (__c32): Use __mpone instead
of mpone and __mptwo instead of mptwo.
(__mpranred): Use __mpone instead of mpone.
* conform/Makefile (test-xfail-ISO/math.h/linknamespace): Remove
variable.
(test-xfail-ISO99/complex.h/linknamespace): Likewise.
(test-xfail-ISO99/math.h/linknamespace): Likewise.
(test-xfail-ISO99/tgmath.h/linknamespace): Likewise.
(test-xfail-ISO11/complex.h/linknamespace): Likewise.
(test-xfail-ISO11/math.h/linknamespace): Likewise.
(test-xfail-ISO11/tgmath.h/linknamespace): Likewise.
(test-xfail-XPG3/math.h/linknamespace): Likewise.
(test-xfail-XPG4/math.h/linknamespace): Likewise.
(test-xfail-POSIX/math.h/linknamespace): Likewise.
(test-xfail-UNIX98/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/complex.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/tgmath.h/linknamespace): Likewise.
(test-xfail-POSIX2008/complex.h/linknamespace): Likewise.
(test-xfail-POSIX2008/math.h/linknamespace): Likewise.
(test-xfail-POSIX2008/tgmath.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/complex.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/math.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/linknamespace): Likewise.
Commit 5c0508a318 broke the Alpha
port, as the extra parenthesis got in the way of some token pasting
that we were doing in a redefined raw unpack macro.
Avoid this situation in the future by not attempting to redefine a
basic macro, but rather work from the outermost public interface.
The compiler does in fact see through the added indirection.
* sysdeps/alpha/soft-fp/local-soft-fp.h (_FP_UNPACK_RAW_2): Remove.
(_FP_PACK_RAW_2): Remove.
(AXP_DECL_RETURN_Q): Rename from FP_DECL_RETURN, use _FP_UNION_Q.
(AXP_RETURN_Q): Rename from FP_RETURN, use _FP_UNION_Q.
(AXP_UNPACK_RAW_Q, AXP_UNPACK_SEMIRAW_Q, AXP_UNPACK_Q): New.
(AXP_PACK_RAW_Q, AXP_PACK_SEMIRAW_Q, AXP_PACK_Q): New.
* sysdeps/alpha/soft-fp/ots_add.c (_OtsAddX): Update to match.
* sysdeps/alpha/soft-fp/ots_cmp.c (internal_equality): Likewise.
* sysdeps/alpha/soft-fp/ots_cmpe.c (internal_compare): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtqux.c (_OtsCvtQUX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtqx.c (_OtsCvtQX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvttx.c (_OtsConvertFloatTX): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtxq.c (_OtsCvtXQ): Likewise.
* sysdeps/alpha/soft-fp/ots_cvtxt.c (_OtsConvertFloatXT): Likewise.
* sysdeps/alpha/soft-fp/ots_div.c (_OtsDivX): Likewise.
* sysdeps/alpha/soft-fp/ots_mul.c (_OtsMulX): Likewise.
* sysdeps/alpha/soft-fp/ots_nintxq.c (_OtsNintXQ): Likewise.
* sysdeps/alpha/soft-fp/ots_sub.c (_OtsSubX): Likewise.
