mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-02 01:40:07 +00:00
7b36d26b22
1452 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Samuel Thibault
|
81b032c833 |
Drop fpregset unused symbol exposition
* sysdeps/arm/sys/ucontext.h: Remove fpregset struct name, unused and non-compliant. * sysdeps/i386/sys/ucontext.h: Likewise. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise. |
||
Adhemerval Zanella
|
243f59e5aa |
Update i386 libm-test-ulps.
Updated ulps after recent commit "[PATCH 1/7] sin/cos slow paths:
avoid slow paths for small inputs"
(
|
||
Maciej W. Rozycki
|
10a446ddcc |
elf: Unify symbol address run-time calculation [BZ #19818]
Wrap symbol address run-time calculation into a macro and use it throughout, replacing inline calculations. There are a couple of variants, most of them different in a functionally insignificant way. Most calculations are right following RESOLVE_MAP, at which point either the map or the symbol returned can be checked for validity as the macro sets either both or neither. In some places both the symbol and the map has to be checked however. My initial implementation therefore always checked both, however that resulted in code larger by as much as 0.3%, as many places know from elsewhere that no check is needed. I have decided the size growth was unacceptable. Having looked closer I realized that it's the map that is the culprit. Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional boolean argument telling it to access the map without checking it for validity. This in turn has brought quite nice results, with new code actually being smaller for i686, and MIPS o32, n32 and little-endian n64 targets, unchanged in size for x86-64 and, unusually, marginally larger for big-endian MIPS n64, as follows: i686: text data bss dec hex filename 152255 4052 192 156499 26353 ld-2.27.9000-base.so 152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so MIPS/o32/el: text data bss dec hex filename 142906 4396 260 147562 2406a ld-2.27.9000-base.so 142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so MIPS/n32/el: text data bss dec hex filename 142267 4404 260 146931 23df3 ld-2.27.9000-base.so 142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so MIPS/n64/el: text data bss dec hex filename 149835 7376 408 157619 267b3 ld-2.27.9000-base.so 149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so MIPS/o32/eb: text data bss dec hex filename 142870 4396 260 147526 24046 ld-2.27.9000-base.so 142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so MIPS/n32/eb: text data bss dec hex filename 142019 4404 260 146683 23cfb ld-2.27.9000-base.so 141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so MIPS/n64/eb: text data bss dec hex filename 149763 7376 408 157547 2676b ld-2.27.9000-base.so 149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so x86-64: text data bss dec hex filename 148462 6452 400 155314 25eb2 ld-2.27.9000-base.so 148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so [BZ #19818] * sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set' parameter. (SYMBOL_ADDRESS): New macro. [!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use SYMBOL_ADDRESS for symbol address calculation. * elf/dl-runtime.c (_dl_fixup): Likewise. (_dl_profile_fixup): Likewise. * elf/dl-symaddr.c (_dl_symbol_address): Likewise. * elf/rtld.c (dl_main): Likewise. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. (elf_machine_reloc): Likewise. (elf_machine_got_rel): Likewise. * sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
||
|
Samuel Thibault
|
ad2b41bfd8 |
hurd: Bump remaining LGPL2+ htl licences to LGPL 2.1+
* htl/Makefile: Bump licence to LGPL 2.1+. * htl/alloca_cutoff.c: Likewise. * htl/cthreads-compat.c: Likewise. * htl/lockfile.c: Likewise. * htl/pt-alloc.c: Likewise. * htl/pt-cancel.c: Likewise. * htl/pt-cleanup.c: Likewise. * htl/pt-create.c: Likewise. * htl/pt-dealloc.c: Likewise. * htl/pt-detach.c: Likewise. * htl/pt-exit.c: Likewise. * htl/pt-getattr.c: Likewise. * htl/pt-initialize.c: Likewise. * htl/pt-internal.h: Likewise. * htl/pt-join.c: Likewise. * htl/pt-self.c: Likewise. * htl/pt-setcancelstate.c: Likewise. * htl/pt-setcanceltype.c: Likewise. * htl/pt-sigmask.c: Likewise. * htl/pt-spin-inlines.c: Likewise. * htl/pt-testcancel.c: Likewise. * htl/pt-yield.c: Likewise. * htl/tests/test-1.c: Likewise. * htl/tests/test-10.c: Likewise. * htl/tests/test-11.c: Likewise. * htl/tests/test-12.c: Likewise. * htl/tests/test-13.c: Likewise. * htl/tests/test-14.c: Likewise. * htl/tests/test-15.c: Likewise. * htl/tests/test-16.c: Likewise. * htl/tests/test-17.c: Likewise. * htl/tests/test-2.c: Likewise. * htl/tests/test-3.c: Likewise. * htl/tests/test-4.c: Likewise. * htl/tests/test-5.c: Likewise. * htl/tests/test-6.c: Likewise. * htl/tests/test-7.c: Likewise. * htl/tests/test-8.c: Likewise. * htl/tests/test-9.c: Likewise. * htl/tests/test-__pthread_destroy_specific-skip.c: Likewise. * sysdeps/htl/bits/cancelation.h: Likewise. * sysdeps/htl/bits/pthread-np.h: Likewise. * sysdeps/htl/bits/pthread.h: Likewise. * sysdeps/htl/bits/pthreadtypes.h: Likewise. * sysdeps/htl/bits/semaphore.h: Likewise. * sysdeps/htl/bits/types/__pthread_key.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_attr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_barrier.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_barrierattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_cond.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_condattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_mutex.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_mutexattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_once.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_rwlock.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_rwlockattr.h: Likewise. * sysdeps/htl/old_pt-atfork.c: Likewise. * sysdeps/htl/pt-atfork.c: Likewise. * sysdeps/htl/pt-attr-destroy.c: Likewise. * sysdeps/htl/pt-attr-getdetachstate.c: Likewise. * sysdeps/htl/pt-attr-getguardsize.c: Likewise. * sysdeps/htl/pt-attr-getinheritsched.c: Likewise. * sysdeps/htl/pt-attr-getschedparam.c: Likewise. * sysdeps/htl/pt-attr-getschedpolicy.c: Likewise. * sysdeps/htl/pt-attr-getscope.c: Likewise. * sysdeps/htl/pt-attr-getstack.c: Likewise. * sysdeps/htl/pt-attr-getstackaddr.c: Likewise. * sysdeps/htl/pt-attr-getstacksize.c: Likewise. * sysdeps/htl/pt-attr-init.c: Likewise. * sysdeps/htl/pt-attr-setdetachstate.c: Likewise. * sysdeps/htl/pt-attr-setguardsize.c: Likewise. * sysdeps/htl/pt-attr-setinheritsched.c: Likewise. * sysdeps/htl/pt-attr-setschedparam.c: Likewise. * sysdeps/htl/pt-attr-setschedpolicy.c: Likewise. * sysdeps/htl/pt-attr-setscope.c: Likewise. * sysdeps/htl/pt-attr-setstack.c: Likewise. * sysdeps/htl/pt-attr-setstackaddr.c: Likewise. * sysdeps/htl/pt-attr-setstacksize.c: Likewise. * sysdeps/htl/pt-attr.c: Likewise. * sysdeps/htl/pt-barrier-destroy.c: Likewise. * sysdeps/htl/pt-barrier-init.c: Likewise. * sysdeps/htl/pt-barrier-wait.c: Likewise. * sysdeps/htl/pt-barrier.c: Likewise. * sysdeps/htl/pt-barrierattr-destroy.c: Likewise. * sysdeps/htl/pt-barrierattr-getpshared.c: Likewise. * sysdeps/htl/pt-barrierattr-init.c: Likewise. * sysdeps/htl/pt-barrierattr-setpshared.c: Likewise. * sysdeps/htl/pt-cond-brdcast.c: Likewise. * sysdeps/htl/pt-cond-destroy.c: Likewise. * sysdeps/htl/pt-cond-init.c: Likewise. * sysdeps/htl/pt-cond-signal.c: Likewise. * sysdeps/htl/pt-cond-timedwait.c: Likewise. * sysdeps/htl/pt-cond-wait.c: Likewise. * sysdeps/htl/pt-cond.c: Likewise. * sysdeps/htl/pt-condattr-destroy.c: Likewise. * sysdeps/htl/pt-condattr-getclock.c: Likewise. * sysdeps/htl/pt-condattr-getpshared.c: Likewise. * sysdeps/htl/pt-condattr-init.c: Likewise. * sysdeps/htl/pt-condattr-setclock.c: Likewise. * sysdeps/htl/pt-condattr-setpshared.c: Likewise. * sysdeps/htl/pt-destroy-specific.c: Likewise. * sysdeps/htl/pt-equal.c: Likewise. * sysdeps/htl/pt-getconcurrency.c: Likewise. * sysdeps/htl/pt-getcpuclockid.c: Likewise. * sysdeps/htl/pt-getschedparam.c: Likewise. * sysdeps/htl/pt-getspecific.c: Likewise. * sysdeps/htl/pt-init-specific.c: Likewise. * sysdeps/htl/pt-key-create.c: Likewise. * sysdeps/htl/pt-key-delete.c: Likewise. * sysdeps/htl/pt-key.h: Likewise. * sysdeps/htl/pt-mutex-destroy.c: Likewise. * sysdeps/htl/pt-mutex-getprioceiling.c: Likewise. * sysdeps/htl/pt-mutex-init.c: Likewise. * sysdeps/htl/pt-mutex-lock.c: Likewise. * sysdeps/htl/pt-mutex-setprioceiling.c: Likewise. * sysdeps/htl/pt-mutex-timedlock.c: Likewise. * sysdeps/htl/pt-mutex-trylock.c: Likewise. * sysdeps/htl/pt-mutex-unlock.c: Likewise. * sysdeps/htl/pt-mutexattr-destroy.c: Likewise. * sysdeps/htl/pt-mutexattr-getprioceiling.c: Likewise. * sysdeps/htl/pt-mutexattr-getprotocol.c: Likewise. * sysdeps/htl/pt-mutexattr-getpshared.c: Likewise. * sysdeps/htl/pt-mutexattr-gettype.c: Likewise. * sysdeps/htl/pt-mutexattr-init.c: Likewise. * sysdeps/htl/pt-mutexattr-setprioceiling.c: Likewise. * sysdeps/htl/pt-mutexattr-setprotocol.c: Likewise. * sysdeps/htl/pt-mutexattr-setpshared.c: Likewise. * sysdeps/htl/pt-mutexattr-settype.c: Likewise. * sysdeps/htl/pt-mutexattr.c: Likewise. * sysdeps/htl/pt-once.c: Likewise. * sysdeps/htl/pt-rwlock-attr.c: Likewise. * sysdeps/htl/pt-rwlock-destroy.c: Likewise. * sysdeps/htl/pt-rwlock-init.c: Likewise. * sysdeps/htl/pt-rwlock-rdlock.c: Likewise. * sysdeps/htl/pt-rwlock-timedrdlock.c: Likewise. * sysdeps/htl/pt-rwlock-timedwrlock.c: Likewise. * sysdeps/htl/pt-rwlock-tryrdlock.c: Likewise. * sysdeps/htl/pt-rwlock-trywrlock.c: Likewise. * sysdeps/htl/pt-rwlock-unlock.c: Likewise. * sysdeps/htl/pt-rwlock-wrlock.c: Likewise. * sysdeps/htl/pt-rwlockattr-destroy.c: Likewise. * sysdeps/htl/pt-rwlockattr-getpshared.c: Likewise. * sysdeps/htl/pt-rwlockattr-init.c: Likewise. * sysdeps/htl/pt-rwlockattr-setpshared.c: Likewise. * sysdeps/htl/pt-setconcurrency.c: Likewise. * sysdeps/htl/pt-setschedparam.c: Likewise. * sysdeps/htl/pt-setschedprio.c: Likewise. * sysdeps/htl/pt-setspecific.c: Likewise. * sysdeps/htl/pt-spin.c: Likewise. * sysdeps/htl/pt-startup.c: Likewise. * sysdeps/htl/pthread.h: Likewise. * sysdeps/htl/sem-close.c: Likewise. * sysdeps/htl/sem-destroy.c: Likewise. * sysdeps/htl/sem-getvalue.c: Likewise. * sysdeps/htl/sem-init.c: Likewise. * sysdeps/htl/sem-open.c: Likewise. * sysdeps/htl/sem-post.c: Likewise. * sysdeps/htl/sem-timedwait.c: Likewise. * sysdeps/htl/sem-trywait.c: Likewise. * sysdeps/htl/sem-unlink.c: Likewise. * sysdeps/htl/sem-wait.c: Likewise. * sysdeps/hurd/htl/pt-kill.c: Likewise. * sysdeps/i386/htl/pt-machdep.h: Likewise. * sysdeps/mach/htl/pt-block.c: Likewise. * sysdeps/mach/htl/pt-spin.c: Likewise. * sysdeps/mach/htl/pt-stack-alloc.c: Likewise. * sysdeps/mach/htl/pt-thread-alloc.c: Likewise. * sysdeps/mach/htl/pt-thread-start.c: Likewise. * sysdeps/mach/htl/pt-thread-terminate.c: Likewise. * sysdeps/mach/htl/pt-timedblock.c: Likewise. * sysdeps/mach/htl/pt-wakeup.c: Likewise. * sysdeps/mach/hurd/htl/bits/pthread-np.h: Likewise. * sysdeps/mach/hurd/htl/bits/types/struct___pthread_mutex.h: Likewise. * sysdeps/mach/hurd/htl/pt-attr-setstackaddr.c: Likewise. * sysdeps/mach/hurd/htl/pt-attr-setstacksize.c: Likewise. * sysdeps/mach/hurd/htl/pt-docancel.c: Likewise. * sysdeps/mach/hurd/htl/pt-hurd-cond-timedwait.c: Likewise. * sysdeps/mach/hurd/htl/pt-hurd-cond-wait.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-consistent.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-getprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-lock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-setprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-timedlock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-transfer-np.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-trylock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-unlock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex.h: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getprotocol.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getpshared.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getrobust.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-gettype.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprotocol.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setpshared.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setrobust.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-settype.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate.c: Likewise. * sysdeps/mach/hurd/htl/pt-sysdep.c: Likewise. * sysdeps/mach/hurd/htl/pt-sysdep.h: Likewise. * sysdeps/mach/hurd/i386/htl/pt-machdep.c: Likewise. * sysdeps/mach/hurd/i386/htl/pt-setup.c: Likewise. |
||
|
Samuel Thibault
|
33574c17ee |
hurd: Add hurd thread library
Contributed by Agustina Arzille <avarzille@riseup.net> Amos Jeffries <squid3@treenet.co.nz> David Michael <fedora.dm0@gmail.com> Marco Gerards <marco@gnu.org> Marcus Brinkmann <marcus@gnu.org> Neal H. Walfield <neal@gnu.org> Pino Toscano <toscano.pino@tiscali.it> Richard Braun <rbraun@sceen.net> Roland McGrath <roland@gnu.org> Samuel Thibault <samuel.thibault@ens-lyon.org> Thomas DiModica <ricinwich@yahoo.com> Thomas Schwinge <tschwinge@gnu.org> * htl: New directory. * sysdeps/htl: New directory. * sysdeps/hurd/htl: New directory. * sysdeps/i386/htl: New directory. * sysdeps/mach/htl: New directory. * sysdeps/mach/hurd/htl: New directory. * sysdeps/mach/hurd/i386/htl: New directory. * nscd/Depend, resolv/Depend, rt/Depend: Add htl dependency. * sysdeps/mach/hurd/i386/Implies: Add mach/hurd/i386/htl imply. * sysdeps/mach/hurd/i386/libpthread.abilist: New file. |
||
Andrew Senkevich
|
cd66c0e584 |
Fix i386 memmove issue (bug 22644).
[BZ #22644] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Fixed branch conditions. * string/test-memmove.c (do_test2): New testcase. |
||
Joseph Myers
|
8d3f9e85cf |
Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
34ba96b89c |
Update i386 libm-test-ulps.
I found the i386 libm-test-ulps files needed updating (probably the sqrt changes perturbed exactly when excess precision was used by the compiler). * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
Wilco Dijkstra
|
1294b1892e |
Add support for sqrt asm redirects
This patch series cleans up the many uses of __ieee754_sqrt(f/l) in GLIBC. The goal is to enable GCC to do the inlining, and if this fails call the __ieee754_sqrt function. This is done by internally declaring sqrt with asm redirects. The compat symbols and sqrt wrappers need to disable the redirect. The redirect is also disabled if there are already redirects defined when using -ffinite-math-only. All math functions (but not math tests, non-library code and libnldbl) are built with -fno-math-errno which means GCC will typically inline sqrt as a single instruction. This means targets are no longer forced to add a special inline for sqrt. * include/math.h (sqrt): Declare with asm redirect. (sqrtf): Likewise. (sqrtl): Likewise. (sqrtf128): Likewise. * Makeconfig: Add -fno-math-errno for libc/libm, but build testsuite, nonlib and libnldbl with -fmath-errno. * math/w_sqrt_compat.c: Define NO_MATH_REDIRECT. * math/w_sqrt_template.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * sysdeps/i386/fpu/w_sqrt.c: Likewise. * sysdeps/i386/fpu/w_sqrt_compat.c: Likewise. * sysdeps/generic/math-type-macros-float128.h: Remove math.h and complex.h. |
||
|
Samuel Thibault
|
a5df0318ef |
hurd: add gscope support
* elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. |
||
|
Joseph Myers
|
e2bcf6a855 |
Fix i386 fenv_private.h float128 for 32-bit --with-fpmath=sse (bug 22902).
As discussed in bug 22902, the i386 fenv_private.h implementation has problems for float128 for the case of 32-bit glibc built with libgcc from GCC configured using --with-fpmath=sse. The optimized floating-point state handling in fenv_private.h needs to know which floating-point state - x87 or SSE - is used for each floating-point type, so that only one state needs updating / testing for libm code using that state internally. On 32-bit x86, the x87 rounding mode is always used for float128, but the x87 exception flags are only used when libgcc is built using x87 floating-point arithmetic; if libgcc is built for SSE arithmetic, the SSE exception flags are used. The choice of arithmetic with which libgcc is built is independent of that with which glibc is built. Thus, since glibc cannot tell the choice used in libgcc, the default implementations of libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128 (which use the <fenv.h> functions, thus using both x87 and SSE state on processors that have both) need to be used; this patch updates the code accordingly. Tested for 32-bit x86; HJ reports testing in the --with-fpmath=sse case. [BZ #22902] * sysdeps/i386/fpu/fenv_private.h [!__x86_64__] (libc_feholdexcept_setroundf128): New macro. [!__x86_64__] (libc_feupdateenv_testf128): Likewise. |
||
|
Wilco Dijkstra
|
610ee1fc93 |
Remove mplog and mpexp
Remove the now unused mplog and mpexp files. * math/Makefile: Remove mpexp.c and mplog.c * sysdeps/i386/fpu/mpexp.c: Delete file. * sysdeps/i386/fpu/mplog.c: Likewise. * sysdeps/ia64/fpu/mpexp.c: Likewise. * sysdeps/ia64/fpu/mplog.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog. * sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function. * sysdeps/ieee754/dbl-64/mpexp.c: Delete file. * sysdeps/ieee754/dbl-64/mplog.c: Likewise. * sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/mplog.c: Likewise. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*. * sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines. * sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file. * sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise. |
||
Szabolcs Nagy
|
de800d8305 |
Remove slow paths from exp
Remove the __slowexp code, so exp is no longer correctly rounded. The result is computed to about 70 bits precision so the worst case ulp error is about 0.500007 in nearest rounding mode. * manual/probes.texi: Remove slowexp probes. * math/Makefile: Remove slowexp. * sysdeps/generic/math_private.h (__slowexp): Remove. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and document error bounds. * sysdeps/i386/fpu/slowexp.c: Remove. * sysdeps/ia64/fpu/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove. * sysdeps/m68k/m680x0/fpu/slowexp.c: Remove. * sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove. |
||
|
Wilco Dijkstra
|
c3d466cba1 |
Remove slow paths from pow
Remove the slow paths from pow. Like several other double precision math functions, pow is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1). The worst case error is ~0.506ULP. A simple test over a few hundred million values shows pow is 10% faster on average. This fixes BZ #13932. [BZ #13932] * sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove. * benchtests/pow-inputs: Update comment for slow path cases. * manual/probes.texi (slowpow_p10): Delete removed probe. (slowpow_p10): Likewise. * math/Makefile: Remove halfulp.c and slowpow.c. * sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1. * sysdeps/generic/math_private.h (__exp1): Remove error argument. (__halfulp): Remove. (__slowpow): Remove. * sysdeps/i386/fpu/halfulp.c: Delete file. * sysdeps/i386/fpu/slowpow.c: Likewise. * sysdeps/ia64/fpu/halfulp.c: Likewise. * sysdeps/ia64/fpu/slowpow.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument, improve comments and add error analysis. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis. (power1): Remove function: (log1): Remove error argument, add error analysis. (my_log2): Remove function. * sysdeps/ieee754/dbl-64/halfulp.c: Delete file. * sysdeps/ieee754/dbl-64/slowpow.c: Likewise. * sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise. * sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c. * sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c, slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise. * sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file. * sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise. |
||
|
Joseph Myers
|
d8742dd82f |
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
63716ab270 |
Add build infrastructure for narrowing libm functions.
TS 18661-1 defines libm functions that carry out an operation (+ - * / sqrt fma) on their arguments and return a result rounded to a (usually) narrower type, as if the original result were computed to infinite precision and then rounded directly to the result type without any intermediate rounding to the argument type. For example, fadd, faddl and daddl for addition. These are the last remaining TS 18661-1 functions left to be added to glibc. TS 18661-3 extends this to corresponding functions for _FloatN and _FloatNx types. As functions parametrized by two rather than one varying floating-point types, these functions require infrastructure in glibc that was not required for previous libm functions. This patch provides such infrastructure - excluding test support, and actual function implementations, which will be in subsequent patches. Declaring the functions uses a header bits/mathcalls-narrow.h, which is included many times, for each relevant pair of types. This will end up containing macro calls of the form __MATHCALL_NARROW (__MATHCALL_NAME (add), __MATHCALL_REDIR_NAME (add), 2); for each family of narrowing functions. (The structure of this macro call, with the calls to __MATHCALL_NAME and __MATHCALL_REDIR_NAME there rather than in the definition of __MATHCALL_NARROW, arises from the names such as "add" *not* themselves being reserved identifiers - meaning it's necessary to avoid any indirection that would result in a user-defined "add" macro being expanded.) Whereas for existing functions declaring long double functions is disabled if _LIBC in the case where they alias double functions, to facilitate defining the long double functions as aliases of the double ones, there is no such logic for the narrowing functions in this patch. Rather, the files defining such functions are expected to use #define to hide the original declarations of the alias names, to avoid errors about defining aliases with incompatible types. math/Makefile support is added for building the functions (listed in libm-narrow-fns, currently empty) for all relevant pairs of types. An internal header math-narrow.h is added for macros shared between multiple function implementations - currently a ROUND_TO_ODD macro to facilitate writing functions using the round-to-odd implementation approach, and alias macros to create all the required function aliases. libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128 are added for use when required (only for x86_64). float128_private.h support is added for ldbl-128 narrowing functions to be used for _Float128. Certain things are specifically omitted from this patch and the immediate followups. tgmath.h support is deferred; there remain unresolved questions about how the type-generic macros for these functions are supposed to work, especially in the case of arguments of integer type. The math.h / bits/mathcalls-narrow.h logic, and the logic for determining what functions / aliases to define, will need some adjustments to support the sqrt and fma functions, where e.g. f32xsqrtf64 can just be an alias for sqrt rather than a separate function. TS 18661-1 defines FP_FAST_* macros but no support is included for defining them (they won't in general be true without architecture-specific optimized function versions). For each of the function groups (add sub mul div sqrt fma) there are always six functions present (e.g. fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64). When _Float64x and _Float128 are supported, there are seven more (e.g. f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128). In addition, in the ldbl-opt case there are function names such as __nldbl_daddl (an alias for f32xaddf64, which is not a reserved name in TS 18661-1, only in TS 18661-3), for calls to daddl to be mapped to in the -mlong-double-64 case. (Calls to faddl just get mapped to fadd, and for sqrt and fma there won't be __nldbl_* functions because dsqrtl and dfmal can just be mapped to sqrt and fma with -mlong-double-64.) While there are six or thirteen functions present in each group (plus __nldbl_* names only as an ABI, not an API), not all are distinct; they fall in various groups of aliases. There are two distinct versions built if long double has the same format as double; four if they have distinct formats but there is no _Float64x or _Float128 support; five if long double has binary128 format; seven when _Float128 is distinct from long double. Architecture-specific optimized versions are possible, but not included in my patches. For example, IA64 generally supports narrowing the result of most floating-point instructions; Power ISA 2.07 (POWER8) supports double values as arguments to float instructions, with the results narrowed as expected; Power ISA 3 (POWER9) supports round-to-odd for float128 instructions, so meaning that approach can be used without needing to set and restore the rounding mode and test "inexact". I intend to leave any such optimized versions to the architecture maintainers. Generally in such cases it would also make sense for calls to these functions to be expanded inline (given -fno-math-errno); I put a suggestion for TS 18661-1 built-in functions at <https://gcc.gnu.org/wiki/SummerOfCode>. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with further patches). * math/bits/mathcalls-narrow.h: New file. * include/bits/mathcalls-narrow.h: Likewise. * math/math-narrow.h: Likewise. * math/math.h (__MATHCALL_NARROW_ARGS_1): New macro. (__MATHCALL_NARROW_ARGS_2): Likewise. (__MATHCALL_NARROW_ARGS_3): Likewise. (__MATHCALL_NARROW_NORMAL): Likewise. (__MATHCALL_NARROW_REDIR): Likewise. (__MATHCALL_NARROW): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)]: Repeatedly include <bits/mathcalls-narrow.h> with _Mret_, _Marg_ and __MATHCALL_NAME defined. [__GLIBC_USE (IEC_60559_TYPES_EXT)]: Likewise. * math/Makefile (headers): Add bits/mathcalls-narrow.h. (libm-narrow-fns): New variable. (libm-narrow-types-basic): Likewise. (libm-narrow-types-ldouble-yes): Likewise. (libm-narrow-types-float128-yes): Likewise. (libm-narrow-types-float128-alias-yes): Likewise. (libm-narrow-types): Likewise. (libm-routines): Add narrowing functions. * sysdeps/i386/fpu/fenv_private.h [__x86_64__] (libc_feholdexcept_setroundf128): New macro. [__x86_64__] (libc_feupdateenv_testf128): Likewise. * sysdeps/ieee754/float128/float128_private.h: Include <math/math-narrow.h>. [libc_feholdexcept_setroundf128] (libc_feholdexcept_setroundl): Undefine and redefine. [libc_feupdateenv_testf128] (libc_feupdateenv_testl): Likewise. (libm_alias_float_ldouble): Undefine and redefine. (libm_alias_double_ldouble): Likewise. |
||
H.J. Lu
|
f886c16ca5 |
i386: Use __glibc_likely/__glibc_likely in dl-machine.h
The differences in elf/dl-reloc.os are --- before 2018-02-05 03:53:31.970492246 -0800 +++ after 2018-02-05 03:53:49.719902340 -0800 @@ -1202,9 +1202,9 @@ _dl_relocate_object: movl -60(%ebp), %eax testl %eax, %eax je .L249 - movl 8(%eax), %eax - movl 8(%ebx), %esi - cmpl %esi, %eax + movl 8(%eax), %esi + movl 8(%ebx), %eax + cmpl %eax, %esi ja .L284 jb .L707 .L285: @@ -2255,7 +2255,7 @@ _dl_relocate_object: cmpl $6, %edi movl $4, %edx je .L132 - cmpl %ecx, %eax + cmpl %eax, %ecx je .L350 cmpl $7, %edi je .L419 @@ -2735,7 +2735,7 @@ _dl_relocate_object: je .L120 .L121: movl -96(%ebp), %edx - movl $640, 8(%esp) + movl $639, 8(%esp) leal __PRETTY_FUNCTION__.9431@GOTOFF(%edx), %eax movl %eax, 12(%esp) leal .LC9@GOTOFF(%edx), %eax @@ -3454,10 +3454,10 @@ _dl_relocate_object: movl -152(%ebp), %eax movl %eax, 4(%esp) call _dl_dprintf - movl -60(%ebp), %eax - movl 8(%ebx), %esi + movl 8(%ebx), %eax + movl -60(%ebp), %ebx movl -112(%ebp), %edx - movl 8(%eax), %eax + movl 8(%ebx), %esi jmp .L285 .L713: movl %esi, (%esp) * sysdeps/i386/dl-machine.h (elf_machine_rel): Replace __builtin_expect with __glibc_likely and __glibc_unlikely. (elf_machine_rela): Likewise. (elf_machine_lazy_rel): Likewise. |
||
Carlos O'Donell
|
2ec0e7eade |
Revert Intel CET changes to __jmp_buf_tag (Bug 22743)
In commit |
||
|
Samuel Thibault
|
107a35a575 |
i386: Regenerate libm-test-ulps for for gcc 7 on i686
* sysdeps/i386/fpu/libm-test-ulps: Regenerated for GCC 7 with "-O2 -march=i686". |
||
|
Samuel Thibault
|
4a5ce6e908 |
hurd: Fix build without NO_HIDDEN
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic) [NO_RTLD_HIDDEN]: Call JUMPTARGET (___tls_get_addr) instead of HIDDEN_JUMPTARGET (___tls_get_addr). * sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Likewise. |
||
|
Joseph Myers
|
688903eb3e |
Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise. |
||
|
Joseph Myers
|
f1e005022e |
Revert exp reimplementation (causes test failures).
Revert: 2017-12-19 Joseph Myers <joseph@codesourcery.com> * sysdeps/x86_64/fpu/libm-test-ulps: Update. 2017-12-19 Patrick McGehearty <patrick.mcgehearty@oracle.com> * sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and <errno.h>. Include "eexp.tbl". (half): New constant. (one): Likewise. (__ieee754_exp): Rewrite. (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/eexp.tbl: New file. * sysdeps/ieee754/dbl-64/slowexp.c: Remove file. * sysdeps/i386/fpu/slowexp.c: Likewise. * sysdeps/ia64/fpu/slowexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise. * sysdeps/generic/math_private.h (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in comment. * sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math] (CPPFLAGS-slowexp.c): Remove variable. * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove slowexp-fma, slowexp-fma4 and slowexp-avx. (CFLAGS-slowexp-fma.c): Remove variable. (CFLAGS-slowexp-fma4.c): Likewise. (CFLAGS-slowexp-avx.c): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not define as macro. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise. * math/Makefile (type-double-routines): Remove slowexp. * manual/probes.texi (slowexp_p6): Remove. (slowexp_p32): Likewise. |
||
Patrick McGehearty
|
6fd0a3c6a8 |
Improve __ieee754_exp() performance by greater than 5x on sparc/x86.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
||
|
H.J. Lu
|
cba595c350 |
x86: Add feature_1 to tcbhead_t [BZ #22563]
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer to support Shadow Stack in Intel Control-flow Enforcemen Technology. cancel_jmp_buf has been updated to include saved_mask so that it is as large as struct __jmp_buf_tag. We must suport the old cancel_jmp_buf in existing binaries. Since symbol versioning doesn't work on cancel_jmp_buf, feature_1 is added to tcbhead_t so that setjmp and longjmp can check if shadow stack is enabled. NB: Shadow stack is enabled only if all modules are shadow stack enabled. [BZ #22563] * sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New. * sysdeps/i386/nptl/tls.h (tcbhead_t): Add feature_1. * sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New. * sysdeps/x86_64/nptl/tls.h (tcbhead_t): Rename __glibc_unused1 to feature_1. |
||
|
H.J. Lu
|
9d7a3741c9 |
Add --enable-static-pie configure option to build static PIE [BZ #19574]
Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise. |
||
|
Joseph Myers
|
1f9055ce04 |
Add _Float32 function aliases.
This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
0d93b7fd7c |
Add _Float64, _Float32x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
e4602cba2f |
Use libm_alias_float for i386.
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_float (or libm_alias_float_other in cases where the main symbol name is defined with versioned_symbol) to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>. (asinhf): Define using libm_alias_float. * sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>. (atanf): Define using libm_alias_float. * sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>. (cbrtf): Define using libm_alias_float. * sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>. (ceilf): Define using libm_alias_float. * sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>. (copysignf): Define using libm_alias_float. * sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>. (expm1f): Define using libm_alias_float. * sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>. (fabsf): Define using libm_alias_float. * sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>. (floorf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>. (frexpf): Define using libm_alias_float. * sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>. (llrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>. (logbf): Define using libm_alias_float. * sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>. (lrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>. (nearbyintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>. (remquof): Define using libm_alias_float. * sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>. (rintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>. (truncf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include <libm-alias-float.h>. (exp2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include <libm-alias-float.h>. (expf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include <libm-alias-float.h>. (log2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include <libm-alias-float.h>. (logf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include <libm-alias-float.h>. (powf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include <libm-alias-float.h>. (cosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include <libm-alias-float.h>. (sincosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include <libm-alias-float.h>. (sinf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/i686/multiarch/s_fmaf.c: Include <libm-alias-float.h>. (fmaf): Define using libm_alias_float. |
||
|
Joseph Myers
|
bc4e8f9b49 |
Use libm_alias_double for i386.
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_double to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>. (asinh): Define using libm_alias_double. * sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>. (atan): Define using libm_alias_double. * sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>. (cbrt): Define using libm_alias_double. * sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>. (copysign): Define using libm_alias_double. * sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>. (expm1): Define using libm_alias_double. * sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>. (fabs): Define using libm_alias_double. * sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>. (fdim): Define using libm_alias_double. * sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>. (frexp): Define using libm_alias_double. * sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>. (llrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>. (logb): Define using libm_alias_double. * sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>. (remquo): Define using libm_alias_double. * sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double. |
||
|
Joseph Myers
|
a23aa5b727 |
Add _Float64x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
2ce30701e6 |
Use libm_alias_ldouble in sysdeps/i386/fpu.
This patch continues the preparation for additional _FloatN / _FloatNx function aliases by using libm_alias_ldouble for sysdeps/i386/fpu long double functions, so that they can have _Float64x aliases added in future. Tested for x86_64 (which includes some of these implementations) and x86, including build-many-glibcs.py tests that installed stripped shared libraries are unchanged by the patch. * sysdeps/i386/fpu/e_expl.S: Include <libm-alias-ldouble.h>. [USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_asinhl.S: Include <libm-alias-ldouble.h>. (asinhl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_atanl.c: Include <libm-alias-ldouble.h>. (atanl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_cbrtl.S: Include <libm-alias-ldouble.h>. (cbrtl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_ceill.S: Include <libm-alias-ldouble.h>. (ceill): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_copysignl.S: Include <libm-alias-ldouble.h>. (copysignl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>. (fabsl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_floorl.S: Include <libm-alias-ldouble.h>. (floorl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_frexpl.S: Include <libm-alias-ldouble.h>. (frexpl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>. (llrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_logbl.c: Include <libm-alias-ldouble.h>. (logbl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_lrintl.S: Include <libm-alias-ldouble.h>. (lrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nearbyintl.S: Include <libm-alias-ldouble.h>. (nearbyintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nextafterl.c: Include <libm-alias-ldouble.h>. (nextafterl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_remquol.S: Include <libm-alias-ldouble.h>. (remquol): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_rintl.c: Include <libm-alias-ldouble.h>. (rintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_truncl.S: Include <libm-alias-ldouble.h>. (truncl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble. |
||
|
Adhemerval Zanella
|
dff91cd45e |
nptl: Add tests for internal pthread_mutex_t offsets
This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
||
|
H.J. Lu
|
95b93c6e0d |
x86: Add sysdeps/x86/sysdep.h
Add a new header file, sysdeps/x86/sysdep.h, for common assembly code macros between i386 and x86-64. Tested on i686 and x86-64. There are no differences in outputs of "readelf -a" and "objdump -dw" on all glibc shared objects before and after the patch. * sysdeps/i386/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise. * sysdeps/x86/sysdep.h: New file. * sysdeps/x86_64/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise. |
||
|
H.J. Lu
|
c5cc45148c |
i586: Use conditional branches in strcpy.S [BZ #22353]
i586 strcpy.S used a clever trick with LEA to implement jump table:
/* ECX has the last 2 bits of the address of source - 1. */
andl $3, %ecx
call 2f
2: popl %edx
/* 0xb is the distance between 2: and 1:. */
leal 0xb(%edx,%ecx,8), %ecx
jmp *%ecx
.align 8
1: /* ECX == 0 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 1 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 2 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 3 */
L(1): movl (%esi), %ecx
leal 4(%esi),%esi
This fails if there are instruction length changes before L(1):. This
patch replaces it with conditional branches:
cmpb $2, %cl
je L(Src2)
ja L(Src3)
cmpb $1, %cl
je L(Src1)
L(Src0):
which have similar performance and work with any instruction lengths.
Tested on i586 and i686 with and without --disable-multi-arch.
[BZ #22353]
* sysdeps/i386/i586/strcpy.S (STRCPY): Use conditional branches.
(1): Renamed to ...
(L(Src0)): This.
(L(Src1)): New.
(L(Src2)): Likewise.
(L(1)): Renamed to ...
(L(Src3)): This.
|
||
|
H.J. Lu
|
63d3b468c1 |
i386: Regenerate libm-test-ulps for for gcc 7
Regenerate libm-test-ulps for gcc 7 with "-m32 -O2 -march=i586". * sysdeps/i386/fpu/libm-test-ulps: Regenerated for GCC 7 with "-O2 -march=i586". |
||
|
H.J. Lu
|
5313581cb5 |
i386: Replace assembly versions of e_powf with generic e_powf.c
This patch replaces i386 assembly versions of e_powf with generic
e_powf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 230.855 78.3358 194%
latency 231.685 94.1259 146%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 239.858 47.4713 405%
latency 247.57 93.8798 163%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 269.078 63.3758 324%
latency 271.473 102.091 165%
* sysdeps/i386/fpu/e_powf.S: Removed.
* sysdeps/i386/fpu/e_powf_log2_data.c: Likewise.
* sysdeps/i386/fpu/w_powf.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_powf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_powf-sse2.
(CFLAGS-e_powf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_powf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_powf.c: Likewise.
|
||
|
H.J. Lu
|
6089a3ee24 |
i386: Replace assembly versions of e_log2f with generic e_log2f.c
This patch replaces i386 assembly versions of e_log2f with generic
e_log2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 92.3845 30.8752 199%
latency 112.855 54.8645 105%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 98.7488 22.7507 334%
latency 118.01 51.6083 128%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 106.635 28.8596 269%
latency 129.888 56.9187 128%
* sysdeps/i386/fpu/e_log2f.S: Removed.
* sysdeps/i386/fpu/e_log2f_data.c: Likewise.
* sysdeps/i386/fpu/w_log2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_log2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_log2f-sse2.
(CFLAGS-e_log2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_log2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Likewise.
|
||
|
H.J. Lu
|
fe596486d6 |
i386: Replace assembly versions of e_logf with generic e_logf.c
This patch replaces i386 assembly versions of e_logf with generic
e_logf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 73.3865 40.0454 83%
latency 90.0985 54.4479 65%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 75.1384 22.1452 239%
latency 91.9441 50.7925 81%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 84.5575 28.7879 193%
latency 103.971 57.5231 80%
* sysdeps/i386/fpu/e_logf.S: Removed.
* sysdeps/i386/fpu/e_logf_data.c: Likewise.
* sysdeps/i386/fpu/w_logf.c: Likewise.
* sysdeps/i386/i686/fpu/e_logf.S: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_logf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_logf-sse2.
(CFLAGS-e_logf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_logf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_logf.c: Likewise.
|
||
|
H.J. Lu
|
7eda65f69e |
i386: Replace assembly versions of e_exp2f with generic e_exp2f.c
This patch replaces i386 assembly versions of e_exp2f with generic
e_exp2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 112.996 40.0454 182%
latency 126.581 54.4479 132%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 113.14 39.447 186%
latency 136.068 55.684 144%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 132.521 40.3759 228%
latency 145.791 58.4587 149%
* sysdeps/i386/fpu/e_exp2f.S: Removed.
* sysdeps/i386/fpu/w_exp2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_exp2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_exp2f-sse2.
(CFLAGS-e_exp2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Likewise.
|
||
|
H.J. Lu
|
b2f6137ea5 |
i386: Replace assembly versions of e_expf with generic e_expf.c
This patch replaces i386 assembly versions of e_expf with generic
e_expf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 55.5724 40.2664 38%
latency 80.0687 60.8517 31%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 62.4056 39.4188 58%
latency 85.5496 59.6377 43%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 133.707 40.3778 231%
latency 149.191 63.2515 135%
* sysdeps/i386/fpu/e_exp2f_data.c: Removed.
* sysdeps/i386/fpu/e_expf.S: Likewise.
* sysdeps/i386/fpu/math_errf.c: Likewise.
* sysdeps/i386/fpu/w_expf.c: Likewise.
* sysdeps/i386/i686/fpu/multiarch/e_expf-ia32.S: Likewise.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Likewise.
* sysdeps/i386/i686/fpu/multiarch/w_expf.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_expf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove e_expf-ia32.
(CFLAGS-e_expf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Rewritten.
|
||
|
H.J. Lu
|
95ccb619f5 |
i386: Regenerate libm-test-ulps
Regenerate libm-test-ulps for --disable-multi-arch. * sysdeps/i386/fpu/libm-test-ulps: Regenerated. |
||
|
H.J. Lu
|
ee417882e0 |
Don't use hidden visibility in libc.a with PIE on i386
On i386, when multi-arch is enabled, all external functions must be called via PIC PLT in PIE, which requires setting up EBX register, since they may be IFUNC functions. * config.h.in (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New. * include/libc-symbols.h (__hidden_proto_hiddenattr): Add check for PIC and NO_HIDDEN_EXTERN_FUNC_IN_PIE. * sysdeps/i386/configure.ac (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New AC_DEFINE if multi-arch is enabled. * sysdeps/i386/configure: Regenerated. |
||
|
H.J. Lu
|
955774751b |
i386: Use "movl main@GOT(%ebx), %eax" in start.S
Don't use "leal main@GOTOFF(%ebx), %eax" since main may be in a shared object. Linker will convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. * sysdeps/i386/start.S: Replace "leal main@GOT(%ebx), %eax" with "movl main@GOTOFF(%ebx), %eax". |
||
|
H.J. Lu
|
02d2d8927d |
Revert x86: Allow undefined _DYNAMIC in static executable
This code is used in non-PIE static executable and static PIE. It checks if _DYNAMIC is undefined before using it to compute load address. But not all targets can convert access _DYNAMIC via GOT, which needs dynamic relocation, to PC-relative at link-time. * sysdeps/i386/dl-machine.h (elf_machine_load_address): Don't allow undefined _DYNAMIC in PIE libc.a. * sysdeps/x86_64/dl-machine.h (elf_machine_load_address): Likewse. |
||
|
Szabolcs Nagy
|
bd4430c2a6 |
Do not wrap logf, log2f and powf
The new generic logf, log2f and powf code don't need wrappers any more, they set errno inline so only use the wrappers on targets that need it. * sysdeps/ieee754/flt-32/e_log2f.c (__log2f): Define without wrapper. * sysdeps/ieee754/flt-32/e_logf.c (__logf): Likewise * sysdeps/ieee754/flt-32/e_powf.c (__powf): Likewise * sysdeps/ieee754/flt-32/w_log2f.c: New file. * sysdeps/ieee754/flt-32/w_logf.c: New file. * sysdeps/ieee754/flt-32/w_powf.c: New file. * sysdeps/i386/fpu/w_log2f.c: New file. * sysdeps/i386/fpu/w_logf.c: New file. * sysdeps/i386/fpu/w_powf.c: New file. * sysdeps/m68k/m680x0/fpu/w_log2f.c: New file. * sysdeps/m68k/m680x0/fpu/w_logf.c: New file. * sysdeps/m68k/m680x0/fpu/w_powf.c: New file. |
||
|
Szabolcs Nagy
|
f7a0b063e7 |
Do not wrap expf and exp2f
The new generic expf and exp2f code don't need wrappers any more, they set errno inline, so only use the wrappers on targets that need it. (If the wrapper is needed, then the top level wrapper code is included, otherwise empty w_exp*f.c is used to suppress the wrapper.) A powerpc64 expf implementation includes the expf c code directly which needed some changes. * sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper. * sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise * sysdeps/ieee754/flt-32/w_exp2f.c: New file. * sysdeps/ieee754/flt-32/w_expf.c: New file. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for the new expf code. * sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file. * sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file. * sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file. * sysdeps/m68k/m680x0/fpu/w_expf.c: New file. * sysdeps/i386/fpu/w_exp2f.c: New file. * sysdeps/i386/fpu/w_expf.c: New file. * sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file. * sysdeps/x86_64/fpu/w_expf.c: New file. |
||
|
H.J. Lu
|
8bcdb7e0c5 |
Mark internal functions with attribute_hidden [BZ #18822]
Mark internal functions with attribute_hidden to allow direct access to
internal functions within libc.so and libc.a without using GOT nor PLT.
Size comparison of libc.so:
On x86-64:
text data bss dec hex
Before: 1728577 20584 17088 1766249 1af369
After : 1728593 20584 17088 1766265 1af379
The only change is __gconv_release_shlib in iconv/gconv_dl.c is inlined
since it is hidden, which increases the code size of gconv_dl.os by 18
bytes.
On i686:
text data bss dec hex
Before: 1869039 11444 11112 1891595 1cdd0b
After : 1868635 11444 11112 1891191 1cdb77
The code size is decreased by avoiding GOT/PLT for hidden functions.
[BZ #18822]
* iconv/gconv_int.h (__gconv_open): Add attribute_hidden.
(__gconv_close): Likewise.
(__gconv): Likewise.
(__gconv_find_transform): Likewise.
(__gconv_lookup_cache): Likewise.
(__gconv_compare_alias_cache): Likewise.
(__gconv_load_cache): Likewise.
(__gconv_get_path): Likewise.
(__gconv_close_transform): Likewise.
(__gconv_release_cache): Likewise.
(__gconv_find_shlib): Likewise.
(__gconv_release_shlib): Likewise.
(__gconv_get_builtin_trans): Likewise.
(__gconv_compare_alias): Likewise.
* include/dlfcn.h (_dlerror_run): Likewise.
* include/stdio.h (__fortify_fail_abort): Likewise.
* include/time.h (__tz_compute): Likewise.
(__strptime_internal): Likewise.
* intl/gettextP.h (_nl_find_domain): Likewise.
(_nl_load_domain): Likewise.
(_nl_find_msg): Likewise.
* intl/plural-exp.h (FREE_EXPRESSION): Likewise.
(EXTRACT_PLURAL_EXPRESSION): Likewise.
* locale/coll-lookup.h (__collidx_table_lookup): Likewise.
* resolv/gai_misc.h (__gai_enqueue_request): Likewise.
(__gai_find_request): Likewise.
(__gai_remove_request): Likewise.
(__gai_notify): Likewise.
(__gai_notify_only): Likewise.
* sysdeps/generic/aio_misc.h (__aio_sigqueue): Likewise.
* sysdeps/generic/ldsodefs.h (_dl_fini): Likewise.
(_dl_non_dynamic_init): Likewise.
(_dl_aux_init): Likewise.
* sysdeps/i386/machine-gmon.h (mcount_internal): Likewise.
* sysdeps/unix/sysv/linux/i386/olddirent.h (__old_getdents64):
Likewise.
* wcsmbs/wcsmbsload.h (__wcsmbs_load_conv): Likewise.
(__wcsmbs_clone_conv): Likewise.
(__wcsmbs_named_conv): Likewise.
|
||
|
Szabolcs Nagy
|
4ea49f4c08 |
New generic powf
without wrapper on aarch64: powf reciprocal-throughput: 4.2x faster powf latency: 2.6x faster old worst-case error: 1.11 ulp new worst-case error: 0.82 ulp aarch64 .text size: -780 bytes aarch64 .rodata size: +144 bytes powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms that are used in exp2f and log2f, except that the log2f polynomial is larger for extra precision and its output (and exp2f input) may be scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction step of exp2 (possible when efficient round and convert toint operation is available). The special case handling tries to minimize the checks in the hot path. When the input of exp2_inline is checked, int arithmetics is used as that was faster on the tested aarch64 cores. * math/Makefile (type-float-routines): Add e_powf_log2_data. * sysdeps/ieee754/flt-32/e_powf.c: New implementation. * sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define. (issignalingf_inline): Likewise. (POWF_LOG2_TABLE_BITS): Likewise. (POWF_LOG2_POLY_ORDER): Likewise. (POWF_SCALE_BITS): Likewise. (POWF_SCALE): Likewise. * sysdeps/i386/fpu/e_powf_log2_data.c: New file. * sysdeps/ia64/fpu/e_powf_log2_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file. |
||
|
Szabolcs Nagy
|
875c76c704 |
New generic log2f
Similar to the new logf: double precision arithmetics and a small lookup table is used. The argument reduction step is the same as in the new logf. without wrapper on aarch64: log2f reciprocal-throughput: 2.3x faster log2f latency: 2.1x faster old worst case error: 1.72 ulp new worst case error: 0.75 ulp aarch64 .text size: -252 bytes aarch64 .rodata size: +244 bytes * math/Makefile (type-float-routines): Add e_log2f_data. * sysdeps/ieee754/flt-32/e_log2f.c: New implementation. * sysdeps/ieee754/flt-32/e_log2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define. (LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define. * sysdeps/i386/fpu/e_log2f_data.c: New file. * sysdeps/ia64/fpu/e_log2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file. |
||
|
Szabolcs Nagy
|
bf27d3973d |
New generic logf
without wrapper on aarch64: logf reciprocal-throughput: 2.2x faster logf latency: 1.9x faster old worst case error: 0.89 ulp new worst case error: 0.82 ulp aarch64 .text size: -356 bytes aarch64 .rodata size: +240 bytes Uses double precision arithmetics and a lookup table to allow smaller polynomial and avoid the use of division. Data is in a separate translation unit with fixed layout to prevent the compiler generating suboptimal literal access. Errors are handled inline according to POSIX rules, but this patch keeps the wrapper with SVID compatible error handling. Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode. * math/Makefile (type-float-routines): Add e_logf_data. * sysdeps/ieee754/flt-32/e_logf.c: New implementation. * sysdeps/ieee754/flt-32/e_logf_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define. (LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define. * sysdeps/i386/fpu/e_logf_data.c: New file. * sysdeps/ia64/fpu/e_logf_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file. |
||
|
H.J. Lu
|
4088d8dd29 |
x86: Allow undefined _DYNAMIC in static executable
When --enable-static-pie is used to build static PIE, _DYNAMIC is used to compute the load address of static PIE. But _DYNAMIC is undefined when creating static executable. This patch makes _DYNAMIC weak in PIE libc.a so that it can be undefined. * sysdeps/i386/dl-machine.h (elf_machine_load_address): Allow undefined _DYNAMIC in PIE libc.a. * sysdeps/x86_64/dl-machine.h (elf_machine_load_address): Likewse. |
||
|
Szabolcs Nagy
|
72aa623345 |
Optimized generic expf and exp2f with wrappers
Based on new expf and exp2f code from https://github.com/ARM-software/optimized-routines/ with wrapper on aarch64: expf reciprocal-throughput: 2.3x faster expf latency: 1.7x faster without wrapper on aarch64: expf reciprocal-throughput: 3.3x faster expf latency: 1.7x faster without wrapper on aarch64: exp2f reciprocal-throughput: 2.8x faster exp2f latency: 1.3x faster libm.so size on aarch64: .text size: -152 bytes .rodata size: -1740 bytes expf/exp2f worst case nearest rounding error: 0.502 ulp worst case non-nearest rounding error: 1 ulp Error checks are inline and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls and once for __expf_finite calls on targets where the new code is used.) Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Const data is kept in a separate translation unit which complicates maintenance a bit, but is expected to give good code for literal loads on most targets and allows sharing data across expf, exp2f and powf. (This data is disabled on i386, m68k and ia64 which have their own expf, exp2f and powf code.) Some details may need target specific tweaks: - best convert and round to int operation in the arg reduction may be different across targets. - code was optimized on fma target, optimal polynomial eval may be different without fma. - gcc does not always generate good code for fp bit representation access via unions or it may be inherently slow on some targets. The libm-test-ulps will need adjustment because.. - The argument reduction ideally uses nearest rounded rint, but that is not efficient on most targets, so the polynomial can get evaluated on a wider interval in non-nearest rounding mode making 1 ulp errors common in that case. - The polynomial is evaluated such that it may have 1 ulp error on negative tiny inputs with upward rounding. * math/Makefile (type-float-routines): Add math_errf and e_exp2f_data. * sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define. (roundtoint, converttoint): Likewise. * sysdeps/ieee754/flt-32/e_expf.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h: New file. * sysdeps/ieee754/flt-32/math_errf.c: New file. * sysdeps/ieee754/flt-32/t_exp2f.h: Remove. * sysdeps/i386/fpu/e_exp2f_data.c: New file. * sysdeps/i386/fpu/math_errf.c: New file. * sysdeps/ia64/fpu/e_exp2f_data.c: New file. * sysdeps/ia64/fpu/math_errf.c: New file. * sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_errf.c: New file. |
||
|
Wilco Dijkstra
|
ca3a382ea3 |
Enable unwind info in libc-start.c and backtrace.c
Add unwind info to __libc_start_main so that unwinding continues one extra level to _start. Similarly add unwind info to backtrace. Given many targets require this, do this in a general way. * csu/Makefile: Add -funwind-tables to libc-start.c. * debug/Makefile: Add -funwind-tables to backtrace.c. * sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c. * sysdeps/arm/Makefile: Likewise. * sysdeps/i386/Makefile: Likewise. * sysdeps/m68k/Makefile: Likewise. * sysdeps/mips/Makefile: Likewise. * sysdeps/nios2/Makefile: Likewise. * sysdeps/sh/Makefile: Likewise. * sysdeps/sparc/Makefile: Likewise. |
||
|
Adhemerval Zanella
|
65687ac76c |
Remove remaining _HAVE_STRING_ARCH_* definitions (BZ #18858)
Since the removal of bits/string.h, _HAVE_STRING_ARCH_* are no longer used. This patch removes the unused macros from i686 and x86_64 sysdeps folder. Checked on x86_64-linux-gnu and i686-linux-gnu. * sysdeps/i386/i686/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Remove define. * sysdeps/x86_64/multiarch/stpcpy.c (_HAVE_STRING_ARCH_stpcpy): Likewise. * sysdeps/x86_64/multiarch/strcspn.c (_HAVE_STRING_ARCH_strcspn): Likewise. * sysdeps/x86_64/multiarch/strncat.c (_HAVE_STRING_ARCH_strncat): Likewise. * sysdeps/x86_64/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Likewise. * sysdeps/x86_64/multiarch/strpbrk.c (_HAVE_STRING_ARCH_strpbrk): Likewise. * sysdeps/x86_64/multiarch/strspn.c (_HAVE_STRING_ARCH_strspn): Likewise. |
||
|
Joseph Myers
|
4f3647e46e |
Prefer new libm function wrappers for !LIBM_SVID_COMPAT.
The initial obsoletion of SVID libm error handling left the old wrappers and __kernel_standard still being used for new ports and static linking, just with macro definitions of _LIB_VERSION and matherr that meant symbols with those names were never actually used and the code for different error handling variants could be optimized out. This patch cleans things up further by eliminating the __kernel_standard use for new ports and static linking. Now, the old wrappers no longer generate any code in the !LIBM_SVID_COMPAT case, while the new errno-only wrappers that were added for float128 support are now also used for float, double and long double in that case. The changes are generally straightforward. The w_scalb*_compat wrappers continue to be used (scalb is obsolescent in the sense of not being supported for float128, but is present in supported standards - the 2001 edition of POSIX and earlier XSI versions - so remains supported for static linking and new ports, as do the float and long double variants that are existing GNU extensions). Those wrappers would only call __kernel_standard in the _LIB_VERSION == _SVID_ case. Since we would like to be able to compile most of glibc without optimization, relying on a static function whose only use is under an if (0) condition being optimized away to avoid an undefined __kernel_standard reference may not be a good idea. Thus, the relevant code in the scalb wrappers has LIBM_SVID_COMPAT conditionals added to guarantee it's not built at all in the case where __kernel_standard does not exist. Just as i386 has its own w_sqrt_compat.c, so w_sqrt.c is also added. ia64 gets dummy w_*.c to prevent those files being built where they would conflict with the ia64 libm, as with its existing w_*_compat.c. Conditions disabling code for !LIBM_SVID_COMPAT are needed in both the math/ wrappers and in the long double wrappers in ldbl-opt (to avoid them setting up aliases and symbol versions for undefined symbols). I hope that future cleanups to how libm function aliases and symbol versioning are done will eliminate the need for most of the ldbl-opt wrappers. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/generic/math-type-macros-double.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * sysdeps/generic/math-type-macros-float.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * sysdeps/generic/math-type-macros-ldouble.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * math/lgamma-compat.h (BUILD_LGAMMA): Include LIBM_SVID_COMPAT condition. * math/w_acos_compat.c: Condition contents on [LIBM_SVID_COMPAT]. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * math/w_scalb_compat.c (sysv_scalb): Condition definition on [LIBM_SVID_COMPAT]. (__scalb): Condition call to sysv_scalb on [LIBM_SVID_COMPAT]. * math/w_scalbf_compat.c (sysv_scalbf): Condition definition on [LIBM_SVID_COMPAT]. (__scalbf): Condition call to sysv_scalbf on [LIBM_SVID_COMPAT]. * math/w_scalbl_compat.c (sysv_scalbl): Condition definition on [LIBM_SVID_COMPAT]. (__scalbl): Condition call to sysv_scalbl on [LIBM_SVID_COMPAT]. * sysdeps/i386/fpu/w_sqrt.c: New file. * sysdeps/ia64/fpu/w_acos.c: Likewise. * sysdeps/ia64/fpu/w_acosf.c: Likewise. * sysdeps/ia64/fpu/w_acosh.c: Likewise. * sysdeps/ia64/fpu/w_acoshf.c: Likewise. * sysdeps/ia64/fpu/w_acoshl.c: Likewise. * sysdeps/ia64/fpu/w_acosl.c: Likewise. * sysdeps/ia64/fpu/w_asin.c: Likewise. * sysdeps/ia64/fpu/w_asinf.c: Likewise. * sysdeps/ia64/fpu/w_asinl.c: Likewise. * sysdeps/ia64/fpu/w_atan2.c: Likewise. * sysdeps/ia64/fpu/w_atan2f.c: Likewise. * sysdeps/ia64/fpu/w_atan2l.c: Likewise. * sysdeps/ia64/fpu/w_atanh.c: Likewise. * sysdeps/ia64/fpu/w_atanhf.c: Likewise. * sysdeps/ia64/fpu/w_atanhl.c: Likewise. * sysdeps/ia64/fpu/w_cosh.c: Likewise. * sysdeps/ia64/fpu/w_coshf.c: Likewise. * sysdeps/ia64/fpu/w_coshl.c: Likewise. * sysdeps/ia64/fpu/w_exp.c: Likewise. * sysdeps/ia64/fpu/w_exp10.c: Likewise. * sysdeps/ia64/fpu/w_exp10f.c: Likewise. * sysdeps/ia64/fpu/w_exp10l.c: Likewise. * sysdeps/ia64/fpu/w_exp2.c: Likewise. * sysdeps/ia64/fpu/w_exp2f.c: Likewise. * sysdeps/ia64/fpu/w_exp2l.c: Likewise. * sysdeps/ia64/fpu/w_expf.c: Likewise. * sysdeps/ia64/fpu/w_expl.c: Likewise. * sysdeps/ia64/fpu/w_fmod.c: Likewise. * sysdeps/ia64/fpu/w_fmodf.c: Likewise. * sysdeps/ia64/fpu/w_fmodl.c: Likewise. * sysdeps/ia64/fpu/w_hypot.c: Likewise. * sysdeps/ia64/fpu/w_hypotf.c: Likewise. * sysdeps/ia64/fpu/w_hypotl.c: Likewise. * sysdeps/ia64/fpu/w_lgamma_r.c: Likewise. * sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise. * sysdeps/ia64/fpu/w_lgammal_r.c: Likewise. * sysdeps/ia64/fpu/w_log.c: Likewise. * sysdeps/ia64/fpu/w_log10.c: Likewise. * sysdeps/ia64/fpu/w_log10f.c: Likewise. * sysdeps/ia64/fpu/w_log10l.c: Likewise. * sysdeps/ia64/fpu/w_log2.c: Likewise. * sysdeps/ia64/fpu/w_log2f.c: Likewise. * sysdeps/ia64/fpu/w_log2l.c: Likewise. * sysdeps/ia64/fpu/w_logf.c: Likewise. * sysdeps/ia64/fpu/w_logl.c: Likewise. * sysdeps/ia64/fpu/w_pow.c: Likewise. * sysdeps/ia64/fpu/w_powf.c: Likewise. * sysdeps/ia64/fpu/w_powl.c: Likewise. * sysdeps/ia64/fpu/w_remainder.c: Likewise. * sysdeps/ia64/fpu/w_remainderf.c: Likewise. * sysdeps/ia64/fpu/w_remainderl.c: Likewise. * sysdeps/ia64/fpu/w_sinh.c: Likewise. * sysdeps/ia64/fpu/w_sinhf.c: Likewise. * sysdeps/ia64/fpu/w_sinhl.c: Likewise. * sysdeps/ia64/fpu/w_sqrt.c: Likewise. * sysdeps/ia64/fpu/w_sqrtf.c: Likewise. * sysdeps/ia64/fpu/w_sqrtl.c: Likewise. * sysdeps/ia64/fpu/w_tgamma.c: Likewise. * sysdeps/ia64/fpu/w_tgammaf.c: Likewise. * sysdeps/ia64/fpu/w_tgammal.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Condition contents on [LIBM_SVID_COMPAT]. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: Condition long_double_symbol call on [LIBM_SVID_COMPAT]. * sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c: Condition long_double_symbol and compat_symbol calls on [LIBM_SVID_COMPAT]. |
||
|
Joseph Myers
|
5a80d39d0d |
Obsolete pow10 functions.
This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
Florian Weimer
|
17e00cc69e | elf: Remove internal_function attribute | ||
|
Joseph Myers
|
4fa9b3bfe6 |
Fix mcontext_t sigcontext namespace (bug 21457).
This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise. |
||
|
Florian Weimer
|
4ebf934e34 |
i386: Replace internal_function attribute for __mcount_internal
__mcount_internal is called from assembler code. Use an explicit
regparm attribute to pass both arguments in registers, to match what
used to happen with internal_function before commit
|
||
|
Florian Weimer
|
fbdc1e3e8d |
i386: Do not set internal_function
All calls to functions with the internal_function attribute have been removed from assembler implementations, which means that the definition of internal_function can be changed at the C level without causing ABI issues with assembler code. _dl_fixup still uses a regparm calling convention on i386, but this is controlled through ARCH_FIXUP_ATTRIBUTE, not internal_function. |
||
|
Florian Weimer
|
b3f85fd2e4 |
_dl_init: Remove internal_function attribute
The function is called from the i386 startup code, which needs minor adjustments due to the changed ABI. |
||
|
Florian Weimer
|
630bf4916f |
_dl_start: Remove internal_function attribute
The i386 startup code needs adjusting because it calls the function and the ABI has changed. |
||
|
Joseph Myers
|
3d452dabd1 |
Fix uc_* namespace (bug 21457).
The standard members of ucontext_t, in all standard versions with that type, are uc_link, uc_sigmask, uc_stack and uc_mcontext. The uc_* namespace is mostly reserved for additions to the structure. However, in XPG4.2, it's only reserved when <ucontext.h> is included, not when <signal.h> is included, while <signal.h> is required to define ucontext_t (but not allowed to make visible other symbols from <ucontext.h>). Thus, nonstandard members should avoid uc_* names. Some already do use __uc_*, but others don't; most architectures (all except ia64, I think) have a member uc_flags and some have additional members beyond that. This patch makes nonstandard members have an __ prefix unless __USE_MISC is defined. Members whose names indicate they are solely padding / reserved for future use are renamed unconditionally to use the __glibc_reserved1 naming convention. This is part of the preparation for a revised version of the mcontext_t / sigcontext patch to be able to eliminate all 13 of the miscellaneous XFAILs in conform/Makefile, rather than only 11 of them as at present (at least one further fix on top of this one will be needed for that as well). Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/generic/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/i386/sys/ucontext.h (__ctx): Move undefine further down. (__ctxt): Likewise. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags and uc_regspace. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags, uc_regs_ptr, uc_regs and uc_reg_space. Rename uc_pad to __glibc_reserved1. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags. |
||
|
H.J. Lu
|
973da22a35 |
i686: Implement IFUNC selectors in C
* sysdeps/i386/i686/multiarch/Makefile (sysdep_routines): Add bcopy-ia32, bzero-ia32, rawmemchr-ia32 memchr-ia32, memcmp-ia32, memcpy-ia32, memmove-ia32, mempcpy-ia32, memset-ia32, strcat-ia32, strchr-ia32, strrchr-ia32, strcpy-ia32, strcmp-ia32, strcspn-ia32, strpbrk-ia32, strspn-ia32, strlen-ia32, stpcpy-ia32, stpncpy-ia32, memcpy_chk-nonshared, mempcpy_chk-nonshared, memmove_chk-nonshared and memset_chk-nonshared * sysdeps/i386/i686/multiarch/bcopy-ia32.S: New file. * sysdeps/i386/i686/multiarch/bcopy.c: Likewise. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.c: Likewise. * sysdeps/i386/i686/multiarch/ifunc-memmove.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-memset.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2-bsf.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2-ssse3.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse2.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-sse4_2.h: Likewise. * sysdeps/i386/i686/multiarch/ifunc-ssse3-sse4_2.h: Likewise. * sysdeps/i386/i686/multiarch/memchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.c: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.c: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.c: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.c: Likewise. * sysdeps/i386/i686/multiarch/memmove-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.c: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.c: Likewise. * sysdeps/i386/i686/multiarch/mempcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.c: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr.c: Likewise. * sysdeps/i386/i686/multiarch/memset-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/memset.c: Likewise. * sysdeps/i386/i686/multiarch/memset_chk-nonshared.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.c: Likewise. * sysdeps/i386/i686/multiarch/stpcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy.c: Likewise. * sysdeps/i386/i686/multiarch/stpncpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/stpncpy.c: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp.c: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp_l.c: Likewise. * sysdeps/i386/i686/multiarch/strcat-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.c: Likewise. * sysdeps/i386/i686/multiarch/strchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.c: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.c: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.c: Likewise. * sysdeps/i386/i686/multiarch/strcspn-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.c: Likewise. * sysdeps/i386/i686/multiarch/strlen-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.c: Likewise. * sysdeps/i386/i686/multiarch/strncase.c: Likewise. * sysdeps/i386/i686/multiarch/strncase_l.c: Likewise. * sysdeps/i386/i686/multiarch/strncat.c: Likewise. * sysdeps/i386/i686/multiarch/strncmp.c: Likewise. * sysdeps/i386/i686/multiarch/strncpy.c: Likewise. * sysdeps/i386/i686/multiarch/strnlen.c: Likewise. * sysdeps/i386/i686/multiarch/strpbrk-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strpbrk.c: Likewise. * sysdeps/i386/i686/multiarch/strrchr-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.c: Likewise. * sysdeps/i386/i686/multiarch/strspn-ia32.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr.c: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.c: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Removed. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/stpcpy.S: Likewise. * sysdeps/i386/i686/multiarch/stpncpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcasecmp_l.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strncase.S: Likewise. * sysdeps/i386/i686/multiarch/strncase_l.S: Likewise. * sysdeps/i386/i686/multiarch/strncat.S: Likewise. * sysdeps/i386/i686/multiarch/strncmp.S: Likewise. * sysdeps/i386/i686/multiarch/strncpy.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strpbrk.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise. |
||
|
H.J. Lu
|
1e8e527dd9 |
i386: Support static PIE in start.S
Since start.o may be compiled as PIC, we should check PIC instead of SHARED. Also avoid dynamic relocation against main in static PIE since _start is the entry point before the executable is relocated. * sysdeps/i386/start.S (_start): Check Check PIC instead of SHARED. Avoid dynamic relocation against main in static PIE. |
||
|
H.J. Lu
|
c8a0e6ec03 |
x86: Remove __memset_zero_constant_len_parameter [BZ #21790]
__memset_zero_constant_len_parameter should be removed by
commit
|
||
Aurelien Jarno
|
144bdab050 |
i686/multiarch: Regenerate ulps
This comes from running “make regen-ulps” on an AMD Opteron 2378 CPU. Changelog: * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Regenerated. |
||
|
Joseph Myers
|
24ab7723b8 |
Consistently use uintN_t not u_intN_t in libm.
This patch changes libm code to make consistent use of C99 uintN_t types instead of sometimes using those and sometimes using the older nonstandard u_intN_t names. This makes sense as a cleanup in its own right, and also facilitates merges to GCC's libquadmath (which gets the types from stdint.h and so may not have u_intN_t available at all). Tested for x86_64, and with build-many-glibcs.py. * math/s_nextafter.c (__nextafter): Use uintN_t instead of u_intN_t. * math/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/generic/math_private.h (ieee_double_shape_type): Likewise. (ieee_float_shape_type): Likewise. * sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise. * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise. * sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise. (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise. * sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise. * sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise. * sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise. * sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise. * sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise. * sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise. * sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise. * sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise. * sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise. * sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise. * sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf): Likewise. * sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise. * sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise. * sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise. * sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf): Likewise. * sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise. * sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise. * sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise. * sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise. * sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise. * sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise. * sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise. * sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise. * sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise. (__ieee754_y0l): Likewise. (pzero): Likewise. (qzero): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. (__ieee754_y1l): Likewise. (pone): Likewise. (qone): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. (__erfcl): Likewise. * sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise. * sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise. * sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise. |
||
|
H.J. Lu
|
dfc93c41ee |
i386: Check PIC to enable PIC setups in multiarch functions
Check PIC, instead of SHARED, to enable PIC setups. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Check PIC instead of SHARED. * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise. |
||
|
H.J. Lu
|
b358255f95 |
i386: Don't define multiarch __memmove_chk in libc.a [BZ #21791]
There is no need to define multiarch __memmove_chk in libc.a since they aren't used at all. [BZ #21791] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S (MEMCPY_CHK): Define only if SHARED is defined. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S (MEMCPY_CHK): Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S (MEMCPY_CHK): Likewise. |
||
|
H.J. Lu
|
47f2739659 |
i386: Test memmove_chk and memset_chk only in libc.so [BZ #21741]
Since there are no multiarch versions of memmove_chk and memset_chk, test multiarch versions of memmove_chk and memset_chk only in libc.so. [BZ #21741] * sysdeps/i386/i686/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test memmove_chk and memset_chk only in libc.so. |
||
|
H.J. Lu
|
4e61a6be44 |
i386: Increase MALLOC_ALIGNMENT to 16 [BZ #21120]
GCC 7 changed the definition of max_align_t on i386: https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=9b5c49ef97e63cc63f1ffa13baf771368105ebe2 As a result, glibc malloc no longer returns memory blocks which are as aligned as max_align_t requires. This causes malloc/tst-malloc-thread-fail to fail with an error like this one: error: allocation function 0, size 144 not aligned to 16 This patch moves the MALLOC_ALIGNMENT definition to <malloc-alignment.h> and increases the malloc alignment to 16 for i386. [BZ #21120] * malloc/malloc-internal.h (MALLOC_ALIGNMENT): Moved to ... * sysdeps/generic/malloc-alignment.h: Here. New file. * sysdeps/i386/malloc-alignment.h: Likewise. * sysdeps/generic/malloc-machine.h: Include <malloc-alignment.h>. |
||
|
Joseph Myers
|
251287734e |
Rename struct ucontext tag (bug 21457).
The ucontext_t type has a tag struct ucontext. As with previous such issues for siginfo_t and stack_t, this tag is not permitted by POSIX (is not in a reserved namespace), and so namespace conformance means breaking C++ name mangling for this type. In this case, the type does need to have some tag rather than just a typedef name, because it includes a pointer to itself. This patch uses struct ucontext_t as the new tag, so the type is mangled as ucontext_t (the POSIX *_t reservation applies in all namespaces, not just the namespace of ordinary identifiers). Another reserved name such as struct __ucontext could of course be used. Because of other namespace issues, this patch does not by itself fix bug 21457 or allow any XFAILs to be removed. Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct ucontext_t. * sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/powerpc/powerpc32/backtrace.c (struct rt_signal_frame_32): Likewise. * sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64): Likewise. * sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h (__profil_counter): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c (__start_context): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT): Likewise. |
||
|
Joseph Myers
|
c86ed71d63 |
Add float128 support for x86_64, x86.
This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
06a5b8f799 |
Update x86 ulps for GCC 7.
Testing with GCC 7 for 32-bit x86 showed some ulps differences, presumably from variation in when values with excess precision get spilled to the stack and so lose that precision. This patch updates the libm-test-ulps files accordingly. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
Zack Weinberg
|
09a596cc2c |
Remove bits/string.h.
These machine-dependent inline string functions have never been on by default, and even if they were a good idea at the time they were introduced, they haven't really been touched in ten to fifteen years and probably aren't a good idea on current-gen processors. Current thinking is that this class of optimization is best left to the compiler. * bits/string.h, string/bits/string.h * sysdeps/aarch64/bits/string.h * sysdeps/m68k/m680x0/m68020/bits/string.h * sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h * sysdeps/x86/bits/string.h: Delete file. * string/string.h: Don't include bits/string.h. * string/bits/string3.h: Rename to bits/string_fortified.h. No need to undef various symbols that the removed headers might have defined as macros. * string/Makefile (headers): Remove bits/string.h, change bits/string3.h to bits/string_fortified.h. * string/string-inlines.c: Update commentary. Remove definitions of various macros that nothing looks at anymore. Don't directly include bits/string.h. Set _STRING_INLINE_unaligned here, based on compiler-predefined macros. * string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY _is_ defined, provide internal hidden alias __strncat. * include/string.h: Declare internal hidden alias __strncat. Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is not defined. * include/bits/string3.h: Rename to bits/string_fortified.h, update to match above. * sysdeps/i386/string-inlines.c: Define compat symbols for everything formerly defined by sysdeps/x86/bits/string.h. Make existing definitions into compat symbols as well. Remove some no-longer-necessary messing around with macros. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c * sysdeps/s390/multiarch/mempcpy.c No need to define _HAVE_STRING_ARCH_mempcpy. Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * sysdeps/i386/i686/multiarch/strncat-c.c * sysdeps/s390/multiarch/strncat-c.c * sysdeps/x86_64/multiarch/strncat-c.c Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def. |
||
|
Florian Weimer
|
69052a3a95 |
i686: Add missing IS_IN (libc) guards to vectorized strcspn
Since commit
|
||
|
Zack Weinberg
|
fd860eaaa8 |
Remove __need macros from errno.h (__need_Emath, __need_error_t).
This is fairly complicated, not because the users of __need_Emath and __need_error_t have complicated requirements, but because the core changes had a lot of fallout. __need_error_t exists for gnulib compatibility in argz.h and argp.h. error_t itself is a Hurdism, an enum containing all the E-constants, so you can do 'p (error_t) errno' in gdb and get a symbolic value. argz.h and argp.h use it for function return values, and they want to fall back to 'int' when that's not available. There is no reason why these nonstandard headers cannot just go ahead and include all of errno.h; so we do that. __need_Emath is defined only by .S files; what they _really_ need is for errno.h to avoid declaring anything other than the E-constants (e.g. 'extern int __errno_location(void);' is a syntax error in assembly language). This is replaced with a check for __ASSEMBLER__ in errno.h, plus a carefully documented requirement for bits/errno.h not to define anything other than macros. That in turn has the consequence that bits/errno.h must not define errno - fortunately, all live ports use the same definition of errno, so I've moved it to errno.h. The Hurd bits/errno.h must also take care not to define error_t when __ASSEMBLER__ is defined, which involves repeating all of the definitions twice, but it's a generated file so that's okay. * stdlib/errno.h: Remove __need_Emath and __need_error_t logic. Reorganize file. Declare errno here. When __ASSEMBLER__ is defined, don't declare anything other than the E-constants. * include/errno.h: Change conditional for exposing internal declarations to (not _ISOMAC and not __ASSEMBLER__). * bits/errno.h: Remove logic for __need_Emath. Document requirements for a port-specific bits/errno.h. * sysdeps/unix/sysv/linux/bits/errno.h * sysdeps/unix/sysv/linux/alpha/bits/errno.h * sysdeps/unix/sysv/linux/hppa/bits/errno.h * sysdeps/unix/sysv/linux/mips/bits/errno.h * sysdeps/unix/sysv/linux/sparc/bits/errno.h: Add multiple-include guard and check against improper inclusion. Remove __need_Emath logic. Don't declare errno here. Ensure all constants are defined as simple integer literals. Consistent formatting. * sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and enum __error_t_codes if __ASSEMBLER__ is not defined. * sysdeps/mach/hurd/bits/errno.h: Regenerate. * argp/argp.h, string/argz.h: Don't define __need_error_t before including errno.h. * sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S * sysdeps/x86_64/fpu/s_cosf.S * sysdeps/x86_64/fpu/s_sincosf.S * sysdeps/x86_64/fpu/s_sinf.S: Just include errno.h; don't define __need_Emath or include bits/errno.h directly. |
||
Alan Modra
|
0572433b5b |
PowerPC64 ELFv2 PPC64_OPT_LOCALENTRY
ELFv2 functions with localentry:0 are those with a single entry point, ie. global entry == local entry, that have no requirement on r2 or r12 and guarantee r2 is unchanged on return. Such an external function can be called via the PLT without saving r2 or restoring it on return, avoiding a common load-hit-store for small functions. This patch implements the ld.so changes necessary for this optimization. ld.so needs to check that an optimized plt call sequence is in fact calling a function implemented with localentry:0, end emit a fatal error otherwise. The elf/testobj6.c change is to stop "error while loading shared libraries: expected localentry:0 `preload'" when running elf/preloadtest, which we'd get otherwise. * elf/elf.h (PPC64_OPT_LOCALENTRY): Define. * sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add refsym and sym parameters. Adjust callers. * sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New. (_dl_reloc_overflow): Increase buffser size. Formatting. * sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset): Delete reloc param, add refsym and sym. Check optimized plt call stubs for localentry:0 functions. Adjust callers. (elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym and sym parameters. Adjust callers. (_dl_reloc_overflow): Move attribute. (_dl_error_localentry): Declare. * elf/dl-runtime.c (_dl_fixup): Save original sym. Pass refsym and sym to elf_machine_fixup_plt. * elf/testobj6.c (preload): Call printf. |
||
Stefan Liebler
|
12d2dd7060 |
Optimize generic spinlock code and use C11 like atomic macros.
This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise. |
||
|
Joseph Myers
|
139904b7e4 |
Fix more namespace issues in sys/ucontext.h (bug 21457).
Continuing the fixes for namespace issues in sys/ucontext.h, this patch moves various symbols into the implementation namespace in the absence of __USE_MISC. As with previous changes, it is nonexhaustive, just covering more straightforward cases. Structure fields are generally changed to have a prefix __ in the absence of __USE_MISC, via a macro __ctx (used without a space before the open parenthesis, since the result is a single identifier). Various macros such as NGREG also have leading __ added. No changes are made to structure tags (and thus to C++ name mangling), except that in the (unused) file sysdeps/i386/sys/ucontext.h, structures defined inside other structures as the type for a field have their tags removed in the non-__USE_MISC case (those structure tags would not in any case have been visible in C++, because in C++ the scope of such a tag is limited to the containing structure). No changes are made to the contents of bits/sigcontext.h, or to whether it is included. Because of remaining namespace issues, this patch does not yet fix the bug or allow any XFAILs to be removed. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/i386/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (__ctxt): Likewise. (fpregset_t): Use __ctx and __ctxt in defining fields. (mcontext_t): Likewise. * sysdeps/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (__ctx): New macro. [__WORDSIZE == 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE == 32] (gregset_t): Define using __NGREG. [__WORDSIZE == 32] (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. [__WORDSIZE != 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE != 32] (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. [__WORDSIZE != 32] (NVRREG): Rename to __NVRREG and define NVRREG to __NVRREG if [__USE_MISC]. [__WORDSIZE != 32] (gregset_t): Define using __NGREG. [__WORDSIZE != 32] (fpregset_t): Define using __NFPREG. [__WORDSIZE != 32] (vscr_t): Use __ctx in defining fields. [__WORDSIZE != 32] (vrregset_t): Likewise. [__WORDSIZE != 32] (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): New macro. (__psw_t): Use __ctx in defining fields. (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (fpreg_t): Use __ctx in defining fields. (fpregset_t): Likewise. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (__ctx): New macro. [__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__x86_64__] (gregset_t): Define using __NGREG. [__x86_64__] (struct _libc_fpxreg): Use __ctx in defining fields. [__x86_64__] (struct _libc_fpstate): Likewise. [__x86_64__] (mcontext_t): Likewise. [!__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [!__x86_64__] (gregset_t): Define using __NGREG. [!__x86_64__] (struct _libc_fpreg): Use __ctx in defining fields. [!__x86_64__] (struct _libc_fpstate): Likewise. [!__x86_64__] (mcontext_t): Likewise. |
||
|
Joseph Myers
|
cfed8ece79 |
Fix sys/ucontext.h namespace from signal.h etc. inclusion (bug 21457).
The various sys/ucontext.h headers include <signal.h> and all the headers split out of <bits/sigstack.h>. (Except that the powerpc version does not include <signal.h>.) None of the standard versions defining ucontext.h require or permit such inclusions; rather, they all say that the stack_t and sigset_t types from signal.h are defined. This patch fixes the headers to include just the bits/ headers for those types (and the existing includes of bits/sigcontext.h). Since bits/types/sigset_t.h is now being included instead of bits/types/__sigset_t.h, __sigset_t uses in the headers are replaced by direct use of the public sigset_t type. sysdeps/unix/sysv/linux/x86/bits/sigcontext.h was relying on the prior inclusion of <signal.h> to define types such as __uint32_t, so gets a bits/types.h include added to provide those types. Although one could keep some or all of the includes under a __USE_MISC conditional, that seems unnecessary to me, especially given the lack of a <signal.h> include in the powerpc version meaning that portable programs already cannot rely on such an include. Tested for x86_64 and x86, and with build-many-glibcs.py. As with other such fixes, more namespace issues remain so this does not permit any XFAILs to be removed or bugs to be closed. [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/generic/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/i386/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h>. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h: Include <bits/types.h>. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. |
||
|
Zack Weinberg
|
a992f506ff |
Remove __need macros from signal.h.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t, sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a scalar, so it's now directly available from bits/types.h. The others get bits/types/ headers. Side effects include: There have been small changes to which non-signal headers expose which subset of the signal-related types. A couple of architectures' nested siginfo_t fields had to be renamed to prevent undesired macro expansion. Internal code that wants to manipulate signal masks must now include <sigsetops.h> (which is not installed) and should be aware that __sigaddset, __sigandset, __sigdelset, __sigemptyset, and __sigorset no longer return a value (unlike the public API). Relatedly, the public signal.h no longer declares any of those functions. The obsolete sigmask() macro no longer has a system-specific definition -- in the cases where it matters, it didn't work anyway. New Linux architectures should create bits/siginfo-arch.h and/or bits/siginfo-consts-arch.h to customize their siginfo_t, rather than duplicating everything in bits/siginfo.h (which no longer exists). Add new __SI_* macros if necessary. Ports to other operating systems are strongly encouraged to generalize this scheme further. * bits/sigevent-consts.h * bits/siginfo-consts.h * bits/types/__sigset_t.h * bits/types/sigevent_t.h * bits/types/siginfo_t.h * sysdeps/unix/sysv/linux/bits/sigevent-consts.h * sysdeps/unix/sysv/linux/bits/siginfo-consts.h * sysdeps/unix/sysv/linux/bits/types/__sigset_t.h * sysdeps/unix/sysv/linux/bits/types/sigevent_t.h * sysdeps/unix/sysv/linux/bits/types/siginfo_t.h: New system-dependent bits headers. * sysdeps/unix/sysv/linux/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h: New Linux-only system-dependent bits headers. * signal/bits/types/sig_atomic_t.h * signal/bits/types/sigset_t.h * signal/bits/types/sigval_t.h: New non-system-dependent bits headers. * sysdeps/generic/sigsetops.h * sysdeps/unix/sysv/linux/sigsetops.h: New internal headers. * include/bits/types/sig_atomic_t.h * include/bits/types/sigset_t.h * include/bits/types/sigval_t.h: New wrappers. * signal/sigsetops.h * bits/siginfo.h * bits/sigset.h * sysdeps/unix/sysv/linux/bits/siginfo.h * sysdeps/unix/sysv/linux/bits/sigset.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo.h * sysdeps/unix/sysv/linux/mips/bits/siginfo.h * sysdeps/unix/sysv/linux/s390/bits/siginfo.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo.h * sysdeps/unix/sysv/linux/tile/bits/siginfo.h * sysdeps/unix/sysv/linux/x86/bits/siginfo.h: Deleted. * signal/Makefile, sysdeps/unix/sysv/linux/Makefile: Update lists of installed headers. * posix/bits/types.h: Define __sig_atomic_t here. * signal/signal.h: Use the new bits headers; no need to handle __need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask to define sigmask. * include/signal.h: No need to handle __need_sig_atomic_t nor __need_sigset_t. Don't define __sigemptyset. * io/sys/poll.h, setjmp/setjmp.h * sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h * sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h * sysdeps/mach/hurd/i386/bits/sigcontext.h * sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h * sysdeps/pthread/bits/sigthread.h * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h * sysdeps/unix/sysv/linux/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/s390/sys/ucontext.h * sysdeps/unix/sysv/linux/sh/sys/ucontext.h * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h * sysdeps/unix/sysv/linux/tile/sys/ucontext.h * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Use bits/types/__sigset_t.h. * misc/sys/select.h, posix/spawn.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/sys/epoll.h * sysdeps/unix/sysv/linux/sys/signalfd.h: Use bits/types/sigset_t.h. * resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h. * rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h. * socket/sys/socket.h: Don't include bits/sigset.h. * login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c * signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c * sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c * sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c * sysdeps/unix/sysv/linux/nptl-signals.h: Include sigsetops.h. * signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c * signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c: __sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset now return no value. * signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c Include <errno.h>, <signal.h>, and <sigsetops.h> instead of "sigsetops.h". * signal/sigsetops.c: Explicitly define __sigismember, __sigaddset, and __sigdelset as compatibility symbols. * signal/Versions: Correct commentary on __sigpause, __sigaddset, __sigdelset, __sigismember. * inet/rcmd.c: Include sigsetops.h. Convert old code using __sigblock/__sigsetmask to use __sigprocmask and friends. |
||
|
Joseph Myers
|
0bcec5321f |
Split up bits/sigstack.h.
bits/sigstack.h contains four things: the legacy struct sigstack type, the preferred stack_t type, the SS_* enum values and macros for signal stack sizes. These vary in different ways between glibc configurations; in particular, the stack sizes vary much more than any of the other pieces. Furthermore, these pieces have different standard namespace rules for when they should be visible (not currently visible in conform/ results both because the relevant tests are XFAILed for sys/ucontext.h namespace issues, and because some of the expectations are incorrect in the same way as the headers, e.g. neither expectations nor headers reflect that current POSIX no longer has either the sigstack function or the sigstack structure). To reduce duplication of identical definitions, and facilitate namespace fixes without requiring the same feature test macro conditions to be repeated in many versions of the same header, this patch splits bits/sigstack.h up into four headers. It keeps the stack size macros, while new bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h are added for the other pieces. bits/types/struct_sigstack.h is the same everywhere, bits/types/stack_t.h has three variants different in the order of the structure elements (generic = MIPS Linux, and other Linux), and bits/ss_flags.h has generic and Linux variants. This patch includes the new headers everywhere that included <bits/sigstack.h>, so should cause no difference to what any public header defines. Subsequent namespace fixes would then remove or condition some of those includes. There should be no conflicts with Zack's changes to signal.h types, beyond the trivial conflict of both making additions to signal/Makefile's headers list; the two patches affect disjoint sets of types and other definitions. Tested for x86_64 and x86, and with build-many-glibcs.py. * bits/ss_flags.h: New file. * bits/types/stack_t.h: Likewise. * include/bits/types/struct_sigstack.h: Likewise. * signal/bits/types/struct_sigstack.h: Likewise. * sysdeps/unix/sysv/linux/bits/ss_flags.h: Likewise. * sysdeps/unix/sysv/linux/bits/types/stack_t.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h: Likewise. * signal/Makefile (headers): Add bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h. * signal/signal.h [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * bits/sigstack.h (struct sigstack): Remove. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/mips/bits/sigstack.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/arm/sys/ucontext.h: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * sysdeps/generic/sys/ucontext.h: Likewise. * sysdeps/i386/sys/ucontext.h: Likewise. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Likewise. |
||
|
H.J. Lu
|
402bf06952 |
x86: Optimize SSE2 memchr overflow calculation
SSE2 memchr computes "edx + ecx - 16" where ecx is less than 16. Use "edx - (16 - ecx)", instead of satured math, to avoid possible addition overflow. This replaces add %ecx, %edx sbb %eax, %eax or %eax, %edx sub $16, %edx with neg %ecx add $16, %ecx sub %ecx, %edx It is the same for x86_64, except for rcx/rdx, instead of ecx/edx. * sysdeps/i386/i686/multiarch/memchr-sse2.S (MEMCHR): Use "edx + ecx - 16" to avoid possible addition overflow. * sysdeps/x86_64/memchr.S (memchr): Likewise. |
||
|
Joseph Myers
|
5df4854ed2 |
Condition some sys/ucontext.h contents on __USE_MISC (bug 21457).
Continuing the fixes for namespace issues arising from sys/ucontext.h, this patch conditions various definitions, that are not needed for defining mcontext_t / ucontext_t, on __USE_MISC, so they do not appear in strict POSIX modes. This patch is non-exhaustive; that is, it only conditions straightforward cases and there may be more such definitions that can be conditioned for these and other architectures, to be dealt with later in separate patches. Also, using __USE_MISC is the minimum change for these definitions where they conflict with POSIX; some headers already have __USE_GNU conditionals on similar definitions of names for registers. The patch specifically does not do anything with definitions in bits/sigcontext.h, and nor does it condition any inclusions of bits/sigcontext.h even where in fact that is not needed on some architectures for the definitions of mcontext_t / ucontext_t. As other namespace issues in these headers remain, this patch does not fix bug 21457, nor allow any XFAILs to be removed. Tested with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (R0): Condition on [__USE_MISC]. (R1): Likewise. (R2): Likewise. (R3): Likewise. (R4): Likewise. (R5): Likewise. (R6): Likewise. (R7): Likewise. (R8): Likewise. (R9): Likewise. (R10): Likewise. (R11): Likewise. (R12): Likewise. (R13): Likewise. (R14): Likewise. (R15): Likewise. * sysdeps/i386/sys/ucontext.h (REG_GS): Likewise. (REG_FS): Likewise. (REG_ES): Likewise. (REG_DS): Likewise. (REG_EDI): Likewise. (REG_ESI): Likewise. (REG_EBP): Likewise. (REG_ESP): Likewise. (REG_EBX): Likewise. (REG_EDX): Likewise. (REG_ECX): Likewise. (REG_EAX): Likewise. (REG_TRAPNO): Likewise. (REG_ERR): Likewise. (REG_EIP): Likewise. (REG_CS): Likewise. (REG_EFL): Likewise. (REG_UESP): Likewise. (REG_SS): Likewise. * sysdeps/m68k/sys/ucontext.h (R_D0): Likewise. (R_D1): Likewise. (R_D2): Likewise. (R_D3): Likewise. (R_D4): Likewise. (R_D5): Likewise. (R_D6): Likewise. (R_D7): Likewise. (R_A0): Likewise. (R_A1): Likewise. (R_A2): Likewise. (R_A3): Likewise. (R_A4): Likewise. (R_A5): Likewise. (R_A6): Likewise. (R_A7): Likewise. (R_SP): Likewise. (R_PC): Likewise. (R_PS): Likewise. (fpregset_t): Likewise. (MCONTEXT_VERSION): Likewise. * sysdeps/mips/sys/ucontext.h (CTX_R0): Likewise. (CTX_AT): Likewise. (CTX_V0): Likewise. (CTX_V1): Likewise. (CTX_A0): Likewise. (CTX_A1): Likewise. (CTX_A2): Likewise. (CTX_A3): Likewise. (CTX_T0): Likewise. (CTX_T1): Likewise. (CTX_T2): Likewise. (CTX_T3): Likewise. (CTX_T4): Likewise. (CTX_T5): Likewise. (CTX_T6): Likewise. (CTX_T7): Likewise. (CTX_S0): Likewise. (CTX_S1): Likewise. (CTX_S2): Likewise. (CTX_S3): Likewise. (CTX_S4): Likewise. (CTX_S5): Likewise. (CTX_S6): Likewise. (CTX_S7): Likewise. (CTX_T8): Likewise. (CTX_T9): Likewise. (CTX_K0): Likewise. (CTX_K1): Likewise. (CTX_GP): Likewise. (CTX_SP): Likewise. (CTX_S8): Likewise. (CTX_RA): Likewise. (CTX_MDLO): Likewise. (CTX_MDHI): Likewise. (CTX_CAUSE): Likewise. (CTX_EPC): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Condition inclusion of <sys/procfs.h> on [__USE_MISC]. (greg_t): Condition on [__USE_MISC]. (gregset_t): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (greg_t): Likewise. (NGREG): Likewise. (gregset_t): Likewise. (REG_R0): Likewise. (REG_R1): Likewise. (REG_R2): Likewise. (REG_R3): Likewise. (REG_R4): Likewise. (REG_R5): Likewise. (REG_R6): Likewise. (REG_R7): Likewise. (REG_R8): Likewise. (REG_R9): Likewise. (REG_R10): Likewise. (REG_R11): Likewise. (REG_R12): Likewise. (REG_R13): Likewise. (REG_R14): Likewise. (REG_R15): Likewise. (struct _libc_fpstate): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (NGREG): Likewise. (NFPREG): Likewise. (gregset_t): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (R_D0): Likewise. (R_D1): Likewise. (R_D2): Likewise. (R_D3): Likewise. (R_D4): Likewise. (R_D5): Likewise. (R_D6): Likewise. (R_D7): Likewise. (R_A0): Likewise. (R_A1): Likewise. (R_A2): Likewise. (R_A3): Likewise. (R_A4): Likewise. (R_A5): Likewise. (R_A6): Likewise. (R_A7): Likewise. (R_SP): Likewise. (R_PC): Likewise. (R_PS): Likewise. (fpregset_t): Likewise. (MCONTEXT_VERSION): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (MCONTEXT_VERSION): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (REG_R0): Likewise. (REG_R1): Likewise. (REG_R2): Likewise. (REG_R3): Likewise. (REG_R4): Likewise. (REG_R5): Likewise. (REG_R6): Likewise. (REG_R7): Likewise. (REG_R8): Likewise. (REG_R9): Likewise. (REG_R10): Likewise. (REG_R11): Likewise. (REG_R12): Likewise. (REG_R13): Likewise. (REG_R14): Likewise. (REG_R15): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Condition inclusion of <arch/abi.h> on [__USE_MISC]. (greg_t): Condition on [__USE_MISC]. (NGREG): Likewise. (gregset_t): Likewise. |
||
|
H.J. Lu
|
1432d38ea0 |
x86: Set dl_platform and dl_hwcap from CPU features [BZ #21391]
dl_platform and dl_hwcap are set from AT_PLATFORM and AT_HWCAP very early during startup. They are used by dynamic linker to determine platform and build an array of hardware capability names, which are added to search path when loading shared object. dl_platform and dl_hwcap are unused on x86-64. On i386, i386, i486, i586 and i686 platforms were supported and only SSE2 capability was used. On x86, usage of AT_PLATFORM and AT_HWCAP to determine platform and processor capabilities is obsolete since all information is available in dl_x86_cpu_features. This patch sets dl_platform and dl_hwcap from dl_x86_cpu_features in dynamic linker. On i386, the available plaforms are changed to i586 and i686 since i386 has been deprecated. On x86-64, the available plaforms are haswell, which is for Haswell class processors with BMI1, BMI2, LZCNT, MOVBE, POPCNT, AVX2 and FMA, and xeon_phi, which is for Xeon Phi class processors with AVX512F, AVX512CD, AVX512ER and AVX512PF. A capability, avx512_1, is also added to x86-64 for AVX512 ISAs: AVX512F, AVX512CD, AVX512BW, AVX512DQ and AVX512VL. [BZ #21391] * sysdeps/i386/dl-machine.h (dl_platform_init) [IS_IN (rtld)]: Only call init_cpu_features. [!IS_IN (rtld)]: Only set GLRO(dl_platform) to NULL if needed. * sysdeps/x86_64/dl-machine.h (dl_platform_init): Likewise. * sysdeps/i386/dl-procinfo.h: Removed. * sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Don't include <sysdeps/i386/dl-procinfo.h> nor <ldsodefs.h>. Include <sysdeps/x86/dl-procinfo.h>. (_dl_procinfo): Replace _DL_HWCAP_COUNT with 32. * sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h [!IS_IN (ldconfig)]: Include <sysdeps/x86/dl-procinfo.h> instead of <sysdeps/generic/dl-procinfo.h>. * sysdeps/x86/cpu-features.c: Include <dl-hwcap.h>. (init_cpu_features): Set dl_platform, dl_hwcap and dl_hwcap_mask. * sysdeps/x86/cpu-features.h (bit_cpu_LZCNT): New. (bit_cpu_MOVBE): Likewise. (bit_cpu_BMI1): Likewise. (bit_cpu_BMI2): Likewise. (index_cpu_BMI1): Likewise. (index_cpu_BMI2): Likewise. (index_cpu_LZCNT): Likewise. (index_cpu_MOVBE): Likewise. (index_cpu_POPCNT): Likewise. (reg_BMI1): Likewise. (reg_BMI2): Likewise. (reg_LZCNT): Likewise. (reg_MOVBE): Likewise. (reg_POPCNT): Likewise. * sysdeps/x86/dl-hwcap.h: New file. * sysdeps/x86/dl-procinfo.h: Likewise. * sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): New. (_dl_x86_platforms): Likewise. |
||
|
H.J. Lu
|
fda19e0438 |
Add sysdeps/x86/dl-procinfo.c
Add sysdeps/x86/dl-procinfo.c for x86 version of processor capability information to reduce duplication between i386 and x86_64 dl-procinfo.c. * sysdeps/i386/dl-procinfo.c: Include <sysdeps/x86/dl-procinfo.c>. * sysdeps/x86_64/dl-procinfo.c: Likewise. * sysdeps/x86/dl-procinfo.c: New file. |
||
|
H.J. Lu
|
bf7730194f |
Check if SSE is available with HAS_CPU_FEATURE
Similar to other CPU feature checks, check if SSE is available with HAS_CPU_FEATURE. * sysdeps/i386/fpu/fclrexcpt.c (__feclearexcept): Use HAS_CPU_FEATURE to check for SSE. * sysdeps/i386/fpu/fedisblxcpt.c (fedisableexcept): Likewise. * sysdeps/i386/fpu/feenablxcpt.c (feenableexcept): Likewise. * sysdeps/i386/fpu/fegetenv.c (__fegetenv): Likewise. * sysdeps/i386/fpu/fegetmode.c (fegetmode): Likewise. * sysdeps/i386/fpu/feholdexcpt.c (__feholdexcept): Likewise. * sysdeps/i386/fpu/fesetenv.c (__fesetenv): Likewise. * sysdeps/i386/fpu/fesetmode.c (fesetmode): Likewise. * sysdeps/i386/fpu/fesetround.c (__fesetround): Likewise. * sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/i386/fpu/fgetexcptflg.c (__fegetexceptflag): Likewise. * sysdeps/i386/fpu/fsetexcptflg.c (__fesetexceptflag): Likewise. * sysdeps/i386/fpu/ftestexcept.c (fetestexcept): Likewise. * sysdeps/i386/setfpucw.c (__setfpucw): Likewise. * sysdeps/x86/cpu-features.h (bit_cpu_SSE): New. (index_cpu_SSE): Likewise. (reg_SSE): Likewise. |
||
|
Adhemerval Zanella
|
db3d848e15 |
Build divdi3 only for architecture that required it
As noted in [1], divdi3 object is only exported in a handful ABIs
(i386, m68k, powerpc32, s390-32, and ia64), however it is built
for all current architectures regardless.
This patch refact the make rules for this object to so only the
aforementioned architectures that actually require it builds it.
Also, to avoid internal PLT calls to the exported symbol from the
module, glibc uses an internal header (symbol-hacks.h) which is
unrequired (and in fact breaks the build for architectures that
intend to get symbol definitions from libgcc.a). The patch also
changes it to create its own header (divdi3-symbol-hacks.h) and
adjust the architectures that require it accordingly.
I checked the build/check (with run-built-tests=no) on the
following architectures (which I think must cover all supported
ABI/builds) using GCC 6.3:
aarch64-linux-gnu
alpha-linux-gnu
arm-linux-gnueabihf
hppa-linux-gnu
ia64-linux-gnu
m68k-linux-gnu
microblaze-linux-gnu
mips64-n32-linux-gnu
mips-linux-gnu
mips64-linux-gnu
nios2-linux-gnu
powerpc-linux-gnu
powerpc-linux-gnu-power4
powerpc64-linux-gnu
powerpc64le-linux-gnu
s390x-linux-gnu
s390-linux-gnu
sh4-linux-gnu
sh4-linux-gnu-soft
sparc64-linux-gnu
sparcv9-linux-gnu
tilegx-linux-gnu
tilegx-linux-gnu-32
tilepro-linux-gnu
x86_64-linux-gnu
x86_64-linux-gnu-x32
i686-linux-gnu
I only saw one regression on sparcv9-linux-gnu (extra PLT call to
.udiv) which I address in next patch in the set. It also correctly
build SH with GCC 7.0.1 (without any regression from
|
||
|
Adhemerval Zanella
|
a358c80530 |
Remove CALL_THREAD_FCT macro
This patch removes CALL_THREAD_FCT macro usage and its defition for x86. For 32 bits it usage is only for force 16 stack alignment, however stack is already explicit aligned in clone syscall. For 64 bits and x32 it just a function call and there is no need to code it with inline assembly. Checked on i686-linux-gnu, x86_64-linux-gnu, and x86_64-linux-gnu-x32. * nptl/pthread_create.c (START_THREAD_DEFN): Remove CALL_THREAD_FCT macro usage. * sysdeps/i386/nptl/tls.h (CALL_THREAD_FCT): Remove definition. * sysdeps/x86_64/nptl/tls.h (CALL_THREAD_FCT): Likewise. * sysdeps/x86_64/32/nptl/tls.h: Remove file. |
||
|
Adhemerval Zanella
|
3abeeec5f4 |
Fix i686 memchr overflow calculation (BZ#21182)
This patch fixes the regression added by |
||
Andreas Schwab
|
605c5ef4fb |
Remove _dl_platform_string
There are no non-trivial uses of _dl_platform_string. |
||
|
Zack Weinberg
|
9090848d06 |
Narrowing the visibility of libc-internal.h even further.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
|
||
|
Joseph Myers
|
2c51dfd05d |
Move tests of catan, catanh to auto-libm-test-*.
This patch moves tests of catan and catanh with finite inputs (other than the divide-by-zero cases producing an exact infinity) to using the auto-libm-test machinery. Each of auto-libm-test-out-catan and auto-libm-test-out-catanh takes about three seconds to generate on my system (so in fact it wasn't necessary after all to defer the move to auto-libm-test-* until the output files were split up by function). Tested for x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of catan and catanh. * math/auto-libm-test-out-catan: New generated file. * math/auto-libm-test-out-catanh: Likewise. * math/libm-test-catan.inc (catan_test_data): Use AUTO_TESTS_c_c. Move tests with finite inputs, except divide-by-zero cases, to auto-libm-test-in. * math/libm-test-catanh.inc (catanh_test_data): Likewise. * math/Makefile (libm-test-funcs-auto): Add catan and catanh. (libm-test-funcs-noauto): Remove catan and catanh. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
fa2a3dd7a3 |
Move tests of casin, casinh to auto-libm-test-*.
This patch moves tests of casin and casinh with finite inputs to using the auto-libm-test machinery. Each of auto-libm-test-out-casin and auto-libm-test-out-casinh takes about 38 minutes to generate on my system because of MPC slowness on special cases that appear in the tests (with MPC 1.0.3; I don't know to what extent current MPC master might speed it up). Tested for x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of casin and casinh. * math/auto-libm-test-out-casin: New generated file. * math/auto-libm-test-out-casinh: Likewise. * math/libm-test-casin.inc (casin_test_data): Use AUTO_TESTS_c_c. Move tests with finite inputs to auto-libm-test-in. * math/libm-test-casinh.inc (casinh_test_data): Likewise. * math/Makefile (libm-test-funcs-auto): Add casin and casinh. (libm-test-funcs-noauto): Remove casin and casinh. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
6b8303a383 |
Move tests of cacos, cacosh to auto-libm-test-*.
This patch moves tests of cacos and cacosh with finite inputs to using the auto-libm-test machinery. Each of auto-libm-test-out-cacos and auto-libm-test-out-cacosh takes about 80 minutes to generate on my system because of MPC slowness on special cases that appear in the tests (with MPC 1.0.3; I don't know to what extent current MPC master might speed it up). Tested for x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of cacos and cacosh. * math/auto-libm-test-out-cacos: New generated file. * math/auto-libm-test-out-cacosh: Likewise. * math/libm-test-cacos.inc (cacos_test_data): Use AUTO_TESTS_c_c. Move tests with finite inputs to auto-libm-test-in. * math/libm-test-cacosh.inc (cacosh_test_data): Likewise. * math/Makefile (libm-test-funcs-auto): Add cacos and cacosh. (libm-test-funcs-noauto): Remove cacos and cacosh. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
|
Adhemerval Zanella
|
37f8abad1c |
nptl: Remove COLORING_INCREMENT
This patch removes the COLORING_INCREMENT define and usage on allocatestack.c.
It has not been used since
|
||
|
Adhemerval Zanella
|
f2d7f23a30 |
Remove i686, x86_64, and powerpc strtok implementations
Based on comments on previous attempt to address BZ#16640 [1], the idea is not support invalid use of strtok (the original bug report proposal). This leader to a new strtok optimized strtok implementation [2]. The idea of this patch is to fix BZ#16640 to align all the implementations to a same contract. However, with newer strtok code it is better to get remove the old assembly ones instead of fix them. For x86 is a gain in all cases since the new implementation can potentially use sse2/sse42 implementation for strspn and strcspn. This shows a better performance on both i686 and x86_64 using the string benchtests. On powerpc64 the gains are mixed, where only for larger inputs or keys some gains are showns (based on benchtest it seems that it shows some gains for keys larger than 10 and inputs larger than 32). I would prefer to remove the optimized implementation based on first code simplicity and second because some more gain could be optimized using a better optimized strcspn/strspn code (as for x86). However if powerpc arch maintainers prefer I can send a v2 with the assembly code adjusted instead. Checked on x86_64-linux-gnu, i686-linux-gnu, and powerpc64le-linux-gnu. [BZ #16640] * sysdeps/i386/i686/strtok.S: Remove file. * sysdeps/i386/i686/strtok_r.S: Likewise. * sysdeps/i386/strtok.S: Likewise. * sysdeps/i386/strtok_r.S: Likewise. * sysdeps/powerpc/powerpc64/strtok.S: Likewise. * sysdeps/powerpc/powerpc64/strtok_r.S: Likewise. * sysdeps/x86_64/strtok.S: Likewise. * sysdeps/x86_64/strtok_r.S: Likewise. [1] https://sourceware.org/ml/libc-alpha/2016-10/msg00411.html [2] https://sourceware.org/ml/libc-alpha/2016-12/msg00461.html |
||
|
H.J. Lu
|
6fab532b47 |
Allow IFUNC relocation against unrelocated shared library
IFUNC relocation against definition in unrelocated shared library will lead to segfault when the IFUNC function is called. This patch allows such IFUNC relocations with a warning. This isn't a real fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21041 It simply allows the program to load. The program will segfault when longjmp is called. * sysdeps/i386/dl-machine.h (elf_machine_rel): Replace _dl_fatal_printf with _dl_error_printf for IFUNC relocation against unrelocated shared library. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. |