In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
strcoll is implemented using a cache for indices and weights of
collation sequences in the strings so that subsequent passes do not
have to search through collation data again. For very large string
inputs, the cache size computation could overflow. In such a case,
use the fallback function that does not cache indices and weights of
collation sequences.
Fixes CVE-2012-4412.
* string/strverscmp.c (__strverscmp): Fix case of different digits
in fractional part of string.
Patch by Jingyu Liu <jyliu@fortinet.com>.
* string/Makefile (tests): Add tst-svc2.
* string/tst-svc2.c: New file.
* string/strverscmp.c (__strverscmp): Optimize size of tables.
* string/test-memmem.c: New file.
* string/test-string.h (BUF1PAGES): Define to 1 if undefined.
(test_init): Size buf1 according to BUF1PAGES.
* stdio-common/scanf16.c: New file.
* stdio-common/scanf17.c: New file.
* scripts/data/localplt-sparc64-linux-gnu.data: New file.
2008-03-29 Eric Blake <ebb9@byu.net>
Rewrite string searches to O(n) rather than O(n^2).
* string/str-two-way.h: New file. For linear fixed-allocation
string searching.
* string/memmem.c: New implementation.
* string/strstr.c: New implementation.
* string/strcasestr.c: New implementation.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Call _res_hconf_init
returning.
(PTR_DEMANGLE): Real definition now that it's not the same as
PRT_MANGLE anymore.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
* string/strerror_l.c: New file.
* string/Makefile (routines): Add strerror_l.
* string/string.h: Declare strerror_l.
* string/Versions: Export strerror_l for GLIBC_2.6.
* nscd/connections.c (nscd_run): Don't define MAXKEYLEN here.
2004-03-22 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/getpagesize.c
(__getpagesize): Avoid warning about writing into read-only memory.
* string/Makefile (routines): Add xpg-strerror.
* string/string.h (strerror_r): If __USE_XOPEN2K but not __USE_GNU,
redirect strerror_r to __xpg_strerror_r.
* string/Versions (libc): Add __xpg_strerror_r@@GLIBC_2.3.4.
* sysdeps/generic/xpg-strerror.c: New file.
* sysdeps/mach/xpg-strerror.c: New file.
