Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
This introduces <dl-is_dso.h> and the _dl_is_dso function. A
test ensures that the official names of libc.so, ld.so, and their
versioned names are recognized.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Revert "elf: Fix DTV gap reuse logic [BZ #27135]"
This reverts commit 572bd547d5.
It turns out that the _dl_next_tls_modid in _dl_map_object_from_fd keeps
returning the same modid over and over again if there is a gap and
more than TLS-using module is loaded in one dlopen call. This corrupts
TLS data structures. The bug is still present after a revert, but
empirically it is much more difficult to trigger (because it involves a
dlopen failure).
If lib->flags (in the cache) did not match GLRO (dl_correct_cache_id),
searching for further glibc-hwcaps entries did not happen, and it
was possible that the best glibc-hwcaps was not found. By accident,
this causes a test failure for elf/tst-glibc-hwcaps-prepend-cache
on armv7l.
This commit changes the cache lookup logic to continue searching
if (a) no match has been found, (b) a named glibc-hwcaps match
has been found(), or (c) non-glibc-hwcaps match has been found
and the entry flags and cache default flags do not match.
_DL_CACHE_DEFAULT_ID is used instead of GLRO (dl_correct_cache_id)
because the latter is only written once on i386 if loading
of libc.so.5 libraries is selected, so GLRO (dl_correct_cache_id)
should probably removed in a future change.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
dlerrror_run in elf/dl-libc.c needs to call GLRO (dl_catch_error)
from the base namespace, just like the exported dlerror
implementation.
Fixes commit b2964eb1d9 ("dlfcn:
Failures after dlmopen should not terminate process [BZ #24772]").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since commit 0c1c3a771e
("dlfcn: Move dlopen into libc") libdl.a is empty, so linking
against it is no longer necessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The testcase elf/tst-tls9-static sometimes fails with:
cannot open 'tst-tlsmod5.so': tst-tlsmod5.so: cannot open shared object file: No such file or directory
cannot open 'tst-tlsmod6.so': tst-tlsmod6.so: cannot open shared object file: No such file or directory
After recent commit
6f1c701026
"dlfcn: Cleanups after -ldl is no longer required"
the libdl variable is not set anymore and thus the
dependencies were missing.
Consolidate all hooks structures into a single one. There are
no static dlopen ABI concerns because glibc 2.34 already comes
with substantial ABI-incompatible changes in this area. (Static
dlopen requires the exact same dynamic glibc version that was used
for static linking.)
The new approach uses a pointer to the hooks structure into
_rtld_global_ro and initalizes it in __rtld_static_init. This avoids
a back-and-forth with various callback functions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
In elf/Makefile, remove the $(libdl) dependency from testobj1.so
because it the unused libdl DSO now causes elf/tst-unused-deps to
fail.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Once libpthread is empty and no longer marked NODELETE, it no longer
can be used for testing.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the __nptl_tls_static_size_for_stack inline function instead,
and the GLRO (dl_tls_static_align) value directly.
The computation of GLRO (dl_tls_static_align) in
_dl_determine_tlsoffset ensures that the alignment is at least
TLS_TCB_ALIGN, which at least STACK_ALIGN (see allocate_stack).
Therefore, the additional rounding-up step is removed.
ALso move the initialization of the default stack size from
__pthread_initialize_minimal_internal to __pthread_early_init.
This introduces an extra system call during single-threaded startup,
but this simplifies the initialization sequence. No locking is
needed around the writes to __default_pthread_attr because the
process is single-threaded at this point.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Coverity discovered that paths allocated by chroot_canon are not freed
in a couple of routines in ldconfig.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A coverity run identified a number of resource leaks in cache.c.
There are a couple of simple memory leaks where a local allocation is
not freed before function return. Then there is a mmap leak and a
file descriptor leak where a map is not unmapped in the error case and
a file descriptor remains open respectively.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This helps to clarify that the caching of these fields in libpthread
(in __static_tls_size, __static_tls_align_m1) is unnecessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After static dlopen, a copy of ld.so is loaded into the inner
namespace, but that copy is not initialized at all. Some
architectures run into serious problems as result, which is why the
_dl_var_init mechanism was invented. With libpthread moving into
libc and parts into ld.so, more architectures impacted, so it makes
sense to switch to a generic mechanism which performs the partial
initialization.
As a result, getauxval now works after static dlopen (bug 20802).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(FYI, this is a repost of
https://sourceware.org/pipermail/libc-alpha/2019-July/105035.html now
that FSF papers have been signed and confirmed on FSF side).
This trivial patch attemps to fix BZ 24106. Basically the bash locally
used when building glibc on the host shall not leak on the installed
glibc, as the system where it is installed might be different and use
another bash location.
So I have looked for all occurences of @BASH@ or $(BASH) in installed
files, and replaced it by /bin/bash. This was suggested by Florian
Weimer in the bug report.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
For some reason only dlopen failure caused dtv gaps to be reused.
It is possible that the intent was to never reuse modids for a
different module, but after dlopen failure all gaps are reused
not just the ones caused by the unfinished dlopened.
So the code has to handle reused modids already which seems to
work, however the data races at thread creation and tls access
(see bug 19329 and bug 27111) may be more severe if slots are
reused so this is scheduled after those fixes. I think fixing
the races are not simpler if reuse is disallowed and reuse has
other benefits, so set GL(dl_tls_dtv_gaps) whenever entries are
removed from the middle of the slotinfo list. The value does
not have to be correct: incorrect true value causes the next
modid query to do a slotinfo walk, incorrect false will leave
gaps and new entries are added at the end.
Fixes bug 27135.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Test concurrent dlopen and pthread_create when the loaded modules have
TLS. This triggers dl-tls assertion failures more reliably than the
nptl/tst-stack4 test.
The dlopened module has 100 DT_NEEDED dependencies with TLS, they were
reused from an existing TLS test. The number of created threads during
dlopen depends on filesystem speed and hardware, but at most 3 threads
are alive at a time to limit resource usage.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is a follow up patch to the fix for bug 19329. This adds relaxed
MO atomics to accesses that were previously data races but are now
race conditions, and where relaxed MO is sufficient.
The race conditions all follow the pattern that the write is behind the
dlopen lock, but a read can happen concurrently (e.g. during tls access)
without holding the lock. For slotinfo entries the read value only
matters if it reads from a synchronized write in dlopen or dlclose,
otherwise the related dtv entry is not valid to access so it is fine
to leave it in an inconsistent state. The same applies for
GL(dl_tls_max_dtv_idx) and GL(dl_tls_generation), but there the
algorithm relies on the fact that the read of the last synchronized
write is an increasing value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DTV setup at thread creation (_dl_allocate_tls_init) is changed
to take the dlopen lock, GL(dl_load_lock). Avoiding data races
here without locks would require design changes: the map that is
accessed for static TLS initialization here may be concurrently
freed by dlclose. That use after free may be solved by only
locking around static TLS setup or by ensuring dlclose does not
free modules with static TLS, however currently every link map
with TLS has to be accessed at least to see if it needs static
TLS. And even if that's solved, still a lot of atomics would be
needed to synchronize DTV related globals without a lock. So fix
both bug 19329 and bug 27111 with a lock that prevents DTV setup
running concurrently with dlopen or dlclose.
_dl_update_slotinfo at TLS access still does not use any locks
so CONCURRENCY NOTES are added to explain the synchronization.
The early exit from the slotinfo walk when max_modid is reached
is not strictly necessary, but does not hurt either.
An incorrect acquire load was removed from _dl_resize_dtv: it
did not synchronize with any release store or fence and
synchronization is now handled separately at thread creation
and TLS access time.
There are still a number of racy read accesses to globals that
will be changed to relaxed MO atomics in a followup patch. This
should not introduce regressions compared to existing behaviour
and avoid cluttering the main part of the fix.
Not all TLS access related data races got fixed here: there are
additional races at lazy tlsdesc relocations see bug 27137.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
All the stack lists are now in _rtld_global, so it is possible
to change stack permissions directly from there, instead of
calling into libpthread to do the change.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Permissions of the cached stacks may have to be updated if an object
is loaded that requires executable stacks, so the dynamic loader
needs to know about these cached stacks.
The move of in_flight_stack and stack_cache_actsize is a requirement for
merging __reclaim_stacks into the fork implementation in libc.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This is an early variant of __tls_init_tp, primarily for initializing
thread-related elements of _rtld_global/GL.
Some existing initialization code not needed for NPTL is moved into
the generic version of this function.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If libpthread is included in libc, it is not necessary to delay
initialization of the lock/unlock function pointers until libpthread
is loaded. This eliminates two unprotected function pointers
from _rtld_global and removes some initialization code from
libpthread.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The stack list is available in ld.so since commit
1daccf403b ("nptl: Move stack list
variables into _rtld_global"), so it's possible to walk the stack
list directly in ld.so and perform the initialization there.
This eliminates an unprotected function pointer from _rtld_global
and reduces the libpthread initialization code.
TLS_INIT_TP is processor-specific, so it is not a good place to
put thread library initialization code (it would have to be repeated
for all CPUs). Introduce __tls_init_tp as a separate function,
to be called immediately after TLS_INIT_TP. Move the existing
stack list setup code for NPTL to this function.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Calling free directly may end up freeing a pointer allocated by the
dynamic loader using malloc from libc.so in the base namespace using
the allocator from libc.so in a secondary namespace, which results in
crashes.
This commit redirects the free call through GLRO and the dynamic
linker, to reach the correct namespace. It also cleans up the dlerror
handling along the way, so that pthread_setspecific is no longer
needed (which avoids triggering bug 24774).
Commit 9e78f6f6e7 ("Implement
_dl_catch_error, _dl_signal_error in libc.so [BZ #16628]") has the
side effect that distinct namespaces, as created by dlmopen, now have
separate implementations of the rtld exception mechanism. This means
that the call to _dl_catch_error from libdl in a secondary namespace
does not actually install an exception handler because the
thread-local variable catch_hook in the libc.so copy in the secondary
namespace is distinct from that of the base namepace. As a result, a
dlsym/dlopen/... failure in a secondary namespace terminates the process
with a dynamic linker error because it looks to the exception handler
mechanism as if no handler has been installed.
This commit restores GLRO (dl_catch_error) and uses it to set the
handler in the base namespace.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It's necessary to stub out __libc_disable_asynccancel and
__libc_enable_asynccancel via rtld-stubbed-symbols because the new
direct references to the unwinder result in symbol conflicts when the
rtld exception handling from libc is linked in during the construction
of librtld.map.
unwind-forcedunwind.c is merged into unwind-resume.c. libc now needs
the functions that were previously only used in libpthread.
The GLIBC_PRIVATE exports of __libc_longjmp and __libc_siglongjmp are
no longer needed, so switch them to hidden symbols.
The symbol __pthread_unwind_next has been moved using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Remove generic tlsdesc code related to lazy tlsdesc processing since
lazy tlsdesc relocation is no longer supported. This includes removing
GL(dl_load_lock) from _dl_make_tlsdesc_dynamic which is only called at
load time when that lock is already held.
Added a documentation comment too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
map is not valid to access here because it can be freed by a concurrent
dlclose: during tls access (via __tls_get_addr) _dl_update_slotinfo is
called without holding dlopen locks. So don't check the modid of map.
The map == 0 and map != 0 code paths can be shared (avoiding the dtv
resize in case of map == 0 is just an optimization: larger dtv than
necessary would be fine too).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since
commit a509eb117f
Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]
the generation counter update is not needed in the failure path.
That commit ensures allocation in _dl_add_to_slotinfo happens before
the demarcation point in dlopen (it is called twice, first time is for
allocation only where dlopen can still be reverted on failure, then
second time actual dtv updates are done which then cannot fail).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The test dlopens a large number of modules with TLS, they are reused
from an existing test.
The test relies on the reuse of slotinfo entries after dlclose, without
bug 27135 fixed this needs a failing dlopen. With a slotinfo list that
has non-monotone increasing generation counters, bug 27136 can trigger.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The max modid is a valid index in the dtv, it should not be skipped.
The bug is observable if the last module has modid == 64 and its
generation is same or less than the max generation of the previous
modules. Then dtv[0].counter implies dtv[64] is initialized but
it isn't. Fixes bug 27136.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When parse_tunables tries to erase a tunable marked as SXID_ERASE for
setuid programs, it ends up setting the envvar string iterator
incorrectly, because of which it may parse the next tunable
incorrectly. Given that currently the implementation allows malformed
and unrecognized tunables pass through, it may even allow SXID_ERASE
tunables to go through.
This change revamps the SXID_ERASE implementation so that:
- Only valid tunables are written back to the tunestr string, because
of which children of SXID programs will only inherit a clean list of
identified tunables that are not SXID_ERASE.
- Unrecognized tunables get scrubbed off from the environment and
subsequently from the child environment.
- This has the side-effect that a tunable that is not identified by
the setxid binary, will not be passed on to a non-setxid child even
if the child could have identified that tunable. This may break
applications that expect this behaviour but expecting such tunables
to cross the SXID boundary is wrong.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Instead of passing GLIBC_TUNABLES via the environment, pass the
environment variable from parent to child. This allows us to test
multiple variables to ensure better coverage.
The test list currently only includes the case that's already being
tested. More tests will be added later.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The simplification of tunable_set interfaces took care of
signed/unsigned conversions while setting values, but comparison with
bounds ended up being incorrect; comparing TUNABLE_SIZE_T values for
example will fail because SIZE_MAX is seen as -1.
Add comparison helpers that take tunable types into account and use
them to do comparison instead.
dlopen updates libname_list by writing to lastp->next, but concurrent
reads in _dl_name_match_p were not synchronized when it was called
without holding GL(dl_load_lock), which can happen during lazy symbol
resolution.
This patch fixes the race between _dl_name_match_p reading lastp->next
and add_name_to_object writing to it. This could cause segfault on
targets with weak memory order when lastp->next->name is read, which
was observed on an arm system. Fixes bug 21349.
(Code is from Maninder Singh, comments and description is from Szabolcs
Nagy.)
Co-authored-by: Vaneet Narang <v.narang@samsung.com>
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
