librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To help detect common kinds of memory (and other resource) management
bugs, GCC 11 adds support for the detection of mismatched calls to
allocation and deallocation functions. At each call site to a known
deallocation function GCC checks the set of allocation functions
the former can be paired with and, if the two don't match, issues
a -Wmismatched-dealloc warning (something similar happens in C++
for mismatched calls to new and delete). GCC also uses the same
mechanism to detect attempts to deallocate objects not allocated
by any allocation function (or pointers past the first byte into
allocated objects) by -Wfree-nonheap-object.
This support is enabled for built-in functions like malloc and free.
To extend it beyond those, GCC extends attribute malloc to designate
a deallocation function to which pointers returned from the allocation
function may be passed to deallocate the allocated objects. Another,
optional argument designates the positional argument to which
the pointer must be passed.
This change is the first step in enabling this extended support for
Glibc.
In a default build for x86_64, size decreased by 24 bytes:
1883294 to 1883270.
Aditionally, avoids repeating the number printing logic in multiple
places.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
The symbols were moved using move-symbol-to-libc.py.
Both functions are moved at the same time because they depend
on internal functions in sysdeps/pthread/sem_routines.c, which
are moved in this commit as well. Additional hidden prototypes
are required to avoid check-localplt failures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 11 warns when a pointer to an uninitialized object is passed
to a function that takes a const-qualified argument. This is done
on the assumption that most such functions read from the object.
For the rare case of a function that doesn't, GCC 11 extends
attribute access to add a new mode called none.
POSIX pthread_setspecific() is one such rare function that takes
a const void* argument but that doesn't read from the object it
points to. To suppress the -Wmaybe-uninitialized issued by GCC
11 when the address of an uninitialized object is passed to it
(e.g., the result of malloc()), this change #defines
__attr_access_none in cdefs.h and uses the macro on the function
in sysdeps/htl/pthread.h and sysdeps/nptl/pthread.h.
No new symbol version is required because there was a forwarder.
The symbol has been moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The syslog open the '/dev/console' for LOG_CONS without O_CLOEXEC,
which might leak in multithread programs that call fork.
Checked on x86_64-linux-gnu.
MSG_NOSIGNAL was added on POSIX 2008 and Hurd seems to support it.
The SIGPIPE handling also makes the implementation not thread-safe
(due the sigaction usage).
Checked on x86_64-linux-gnu.
POSIX states for syslog [1]:
"Values of the priority argument are formed by OR'ing together a
severity-level value and an optional facility value. If no
facility value is specified, the current default facility value is
used."
So the patch fixes an existing violation of the openlog interface contract
where it is ignoring the facility argument when the value is zero
It allows the use LOG_KERN by calling openlog prior syslog usage.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/syslog.html
The commit 2433d39b69, which added time64 support to select, changed
the function to use __NR_pselect6 (or __NR_pelect6_time64) on all
architectures. However, on architectures where the symbol was
implemented with __NR_select the kernel normalizes the passed timeout
instead of return EINVAL. For instance, the input timeval
{ 0, 5000000 } is interpreted as { 5, 0 }.
And as indicated by BZ #27651, this semantic seems to be expected
and changing it results in some performance issues (most likely
the program does not check the return code and keeps issuing
select with unormalized tv_usec argument).
To avoid a different semantic depending whether which syscall the
architecture used to issue, select now always normalize the timeout
input. This is a slight change for some ABIs (for instance aarch64).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Instead of polling the stderr, create two pipes and fork to check
if child timeout as expected similar to tst-pselect.c. Also lower
the timeout value.
Checked on x86_64-linux-gnu.
This change adds new test to assess select()'s timeout related
functionality (the rdfs set provides valid fd - stderr - but during
normal program operation there is no data to be read, so one just
waits for timeout).
To be more specific - two use cases are checked:
- if select() times out immediately when passed struct timeval has
zero values of tv_usec and tv_sec.
- if select() times out after timeout specified in passed argument
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will be used to consolidate the libgcc_s access for backtrace
and pthread_cancel.
Unlike the existing backtrace implementations, it provides some
hardening based on pointer mangling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It adds __glibc_has_builtin, __glibc_has_extension, and
__attribute_maybe_unused__ alongsize with some fixes.
The differences are:
--- glibc
+++ gnulib
@@ -259,7 +259,9 @@
# define __attribute_const__ /* Ignore */
#endif
-#if __GNUC_PREREQ (2,7) || __glibc_has_attribute (__unused__)
+#if defined __STDC_VERSION__ && 201710L < __STDC_VERSION__
+# define __attribute_maybe_unused__ [[__maybe_unused__]]
+#elif __GNUC_PREREQ (2,7) || __glibc_has_attribute (__unused__)
# define __attribute_maybe_unused__ __attribute__ ((__unused__))
#else
# define __attribute_maybe_unused__ /* Ignore */
@@ -485,7 +487,7 @@
/* The #ifndef lets Gnulib avoid including these on non-glibc
platforms, where the includes typically do not exist. */
-#ifdef __GLIBC__
+#ifndef __WORDSIZE
# include <bits/wordsize.h>
# include <bits/long-double.h>
#endif
The [[__attribute_maybe_unused__]] attribute removal __ is due Joseph
questioning gcc support with -std=c2x or -std=gnu2x [1].
The _WORDSIZE replacement by __GLIBC__ is because it does not play
well with internal cdefs.h that also uses
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI.
Checked on x86_64-linux-gnu.
[1] https://sourceware.org/pipermail/libc-alpha/2021-January/121600.html
Extern symbol access in position independent code usually involves GOT
indirection which needs RELATIVE reloc in a static linked PIE. (On
some targets this is avoided e.g. because the linker can relax a GOT
access to a pc-relative access, but this is not generally true.) Code
that runs before static PIE self relocation must avoid relying on
dynamic relocations which can be ensured by using hidden visibility.
However we cannot just make all symbols hidden:
On i386, all calls to IFUNC functions must go through PLT and calls to
hidden functions CANNOT go through PLT in PIE since EBX used in PIE PLT
may not be set up for local calls to hidden IFUNC functions.
This patch aims to make symbol references hidden in code that is used
before and by _dl_relocate_static_pie when building a static PIE libc.
Note: for an object that is used in the startup code, its references
and definition may not have consistent visibility: it is only forced
hidden in the startup code.
This is needed for fixing bug 27072.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
__putc_unlocked is guaranteed to be inlined all the time as opposed to
fputc_unlocked, which does not get inlined when glibc is built with
-Os.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size
-----------------------------
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
void *copy_obj (const void *src, size_t alloc, size_t copysize)
{
void *obj = malloc (alloc);
memcpy (obj, src, copysize);
return obj;
}
Limitations
-----------
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
The addmntent function replicates elements of struct mnt on stack
using alloca, which is unsafe. Put characters directly into the
stream, escaping them as they're being written out.
Also add a test to check all escaped characters with addmntent and
getmntent.
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The tls.h inclusion is not really required and limits possible
definition on more arch specific headers.
This is a cleanup to allow inline functions on sysdep.h, more
specifically on i386 and ia64 which requires to access some tls
definitions its own.
No semantic changes expected, checked with a build against all
affected ABIs.
GCC 11 introduces a -Wstringop-overflow warning for calls to functions
with an array argument passed as a pointer to memory not large enough
for that array. This includes the __sigsetjmp calls from
pthread_cleanup_push macros, because those use a structure in
__pthread_unwind_buf_t, which has a common initial subsequence with
jmp_buf but does not include the saved signal mask; this is OK in this
case because the second argument to __sigsetjmp is 0 so the signal
mask is not accessed.
To avoid this warning, use a function alias __sigsetjmp_cancel with
first argument an array of exactly the type used in the calls to the
function, if using GCC 11 or later. With older compilers, continue to
use __sigsetjmp with a cast, to avoid any issues with compilers
predating the returns_twice attribute not applying the same special
handling to __sigsetjmp_cancel as to __sigsetjmp.
Tested with build-many-glibcs.py for arm-linux-gnueabi that this fixes
the testsuite build failures.
The explicit error return value (without in-band signaling) avoids
complicated steps to detect errors based on whether errno has been
updated.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The __THROW macro and friends expand to "throw ()" for C++ code, but
that syntax is deprecated in C++11 and no longer supported at all since
C++20. In order for glibc headers to be compatible with C++20,
"noexcept" should be used instead.
This patch uses "noexcept (true)" rather than just "noexcept", which is
semantically equivalent, but avoids any possibility of parsing
ambiguities if the next preprocessor token happens to be an opening
parenthesis. This is probably unnecessary, but it seems safer to be
cautious.
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Properly serialize the access to the global state shared between the
syslog functions, to avoid races in multithreaded processes. Protect a
local allocation in the __vsyslog_internal function from leaking during
cancellation.
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Adds the access attribute newly introduced in GCC 10 to the subset of
function declarations that are already covered by _FORTIFY_SOURCE and
that don't have corresponding GCC built-in equivalents.
Reviewed-by: DJ Delorie <dj@redhat.com>
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This change should not have an effect because the system call was
never defined. Also add the misssing attribute_compat_text_section
attribute to the sstk function (a minor optimization). Also update the
NEWS file to document the change.
Fixes commit 9cc93ba097
("misc: Turn sstk into a compat symbol").
It is not implemented anywhere. There is an osf_sstk system call on
alpha, but it is not used to implement sstk, and the system call
is not implemented on Linux, either.
Add a test to pass 64-bit long arguments to syscall with undefined upper
32 bits on x32.
Tested on i386, x86-64 and x32 as well as with build-many-glibcs.py.
The new type struct fd_to_filename makes the allocation of the
backing storage explicit.
Hurd uses /dev/fd, not /proc/self/fd.
Co-Authored-By: Paul Eggert <eggert@cs.ucla.edu>
All functions that have a format string, which can consume a long double
argument, must have one version for each long double format supported on
a platform. On powerpc64le, these functions currently have two versions
(i.e.: long double with the same format as double, and long double with
IBM Extended Precision format). Support for a third long double format
option (i.e. long double with IEEE long double format) is being prepared
and all the aforementioned functions now have a third version (not yet
exported on the master branch, but the code is in).
For these functions to get selected (during build time), references to
them in user programs (or dependent libraries) must get redirected to
the aforementioned new versions of the functions. This patch installs
the header magic required to perform such redirections.
Notice, however, that since the redirections only happen when
__LONG_DOUBLE_USES_FLOAT128 is set to 1, and no platform (including
powerpc64le) currently does it, no redirections actually happen.
Redirections and the exporting of the new functions will happen at the
same time (when powerpc64le adds ldbl-128ibm-compat to their Implies.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
This patch adds IEEE long double versions of q*cvt* functions for
powerpc64le. Unlike all other long double to/from string conversion
functions, these do not rely on internal functions that can take
floating-point numbers with different formats and act on them
accordingly, instead, the related files are rebuilt with the
-mabi=ieeelongdouble compiler flag set.
Having -mabi=ieeelongdouble passed to the compiler causes the object
files to be marked with a .gnu_attribute that is incompatible with the
.gnu_attribute in files built with -mabi=ibmlongdouble (the default).
The difference causes error messages similar to the following:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt_r.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
Although this warning is useful in other situations, the library
actually needs to have functions with different long double formats, so
.gnu_attribute generation is explicitly disabled for these files with
the use of -mno-gnu-attribute.
Tested for powerpc64le on the branch that actually enables the
sysdeps/ieee754/ldbl-128ibm-compat for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
