The RPC interface used by mmap uses the unsigned vm_offset_t, not the
signed off_t, so 32bit bigger than 2GiB values are fine actually.
* sysdeps/mach/hurd/mmap64.c: New file.
Revision 3.50 of the MIPS architecture defined FCSR ABS2008 and NAN2008
bits as optionally read/write [1][2]. No hardware implementation has
ever made use of this feature though. For example the first processor
to implement these bits, the MIPS32r3 proAptiv core, has both bits
read-only, hardwired to 1 [3]. And as from revision 5.03 of the MIPS
architecture the bits are required to be read-only, preset by hardware
[4][5]. Additionally all hardware implementations in existence have the
bits hardwired both to the same value, either of `0' and `1'.
These bits may still be read/write or hardwired to opposite values in
simulated hardware implementations such as QEMU or the FPU emulator
included with the Linux kernel. However to match real hardware
implementations the Linux kernel will set FCSR ABS2008 and NAN2008 bits
both to the same value where possible, reflecting the setting of the
EF_MIPS_NAN2008 ELF file header bit.
Therefore update the bit patterns in macro definitions we use for the
control word, in the 2008-NaN encoding mode, so that both bits have the
same value in a given bit pattern. Additionally mark the FCSR ABS2008
bit as reserved, so that high-level calls to change the control word do
not affect the bit.
This covers the regular FPU configurations, only leaving exotic corner
cases with the value of FCSR control word initially set by the kernel
different to what our code thinks it is. To address the remaining cases
the AT_FPUCW auxiliary vector entry would have to be implemented in the
Linux kernel, which currently is not.
References:
[1] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 80
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 82
[3] "MIPS32 proAptiv Multiprocessing System Software User's Manual",
MIPS Technologies, Inc., Document Number: MD00878, Revision 01.22,
May 14, 2013, Table 12.10 "FCSR Bit Field Descriptions", p. 570
[4] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 82
[5] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 84
* sysdeps/mips/fpu_control.h (_FPU_RESERVED): Include ABS2008.
(_FPU_DEFAULT, _FPU_IEEE) [__mips_nan2008]: Set ABS2008.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.
This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.
The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all. This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE). This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).
This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales. Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.
Tested for x86_64, x86, mips64 and powerpc.
* stdlib/strtod_nan.c: New file.
* stdlib/strtod_nan_double.h: Likewise.
* stdlib/strtod_nan_float.h: Likewise.
* stdlib/strtod_nan_main.c: Likewise.
* stdlib/strtod_nan_narrow.h: Likewise.
* stdlib/strtod_nan_wide.h: Likewise.
* stdlib/strtof_nan.c: Likewise.
* stdlib/strtold_nan.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
* wcsmbs/wcstod_nan.c: Likewise.
* wcsmbs/wcstof_nan.c: Likewise.
* wcsmbs/wcstold_nan.c: Likewise.
* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
strtold_nan.
* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
wcstof_nan.
* include/stdlib.h (__strtof_nan): Declare and use
libc_hidden_proto.
(__strtod_nan): Likewise.
(__strtold_nan): Likewise.
(__wcstof_nan): Likewise.
(__wcstod_nan): Likewise.
(__wcstold_nan): Likewise.
* include/wchar.h (____wcstoull_l_internal): Declare.
* stdlib/strtod_l.c: Do not include <ieee754.h>.
(____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
(STRTOULL): Likewise.
(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
The implementations of strtod and related functions use
locale-specific conversions to lower case when parsing the contents of
a string NAN(n-char-sequence_opt). This has the consequence that
NAN(I) is not treated as being of that form (only the initial NAN part
is accepted). The syntax of n-char-sequence directly maps to the
ASCII letters, digits and underscore as in identifiers, so it is
unambiguous that all ASCII letters must be accepted in all locales.
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2015-11/msg00258.html> (pending
review) applied and depending on that patch, fixes this problem by
checking directly for ASCII letters. This will have the side effect
of no longer accepting 'İ' (dotted 'I') inside NAN() in Turkish
locales, which seems appropriate (that letter wouldn't have been
interpreted as having any meaning in the NaN payload anyway, as not
acceptable to strtoull).
Tested for x86_64 and x86.
[BZ #19266]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Check directly for
upper case and lower case letters inside NAN(), not using TOLOWER.
* stdlib/tst-strtod-nan-locale-main.c: New file.
* stdlib/tst-strtod-nan-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-strtod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-strtod-nan-locale): Depend on $(libm).
* wcsmbs/tst-wcstod-nan-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-wcstod-nan-locale): Depend on $(libm).
This avoids build failures in the tests, and matches what is in
bits/mathdef.h.
Update the libc and libm abilist files to include __finitel,
__isinfl, and __isnanl.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
In the course of reviewing Linux 4.3 changes for any glibc header
updates needed, I found that
sysdeps/unix/sysv/linux/netpacket/packet.h was extremely out of date
(last updated for Linux 2.3.15, it seems). This patch updates the
sets of constants present in that header to include those added to
those sets in newer kernels (include/uapi/linux/if_packet.h).
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/netpacket/packet.h (PACKET_COPY_THRESH):
New macro.
(PACKET_AUXDATA): Likewise.
(PACKET_ORIGDEV): Likewise.
(PACKET_VERSION): Likewise.
(PACKET_HDRLEN): Likewise.
(PACKET_RESERVE): Likewise.
(PACKET_TX_RING): Likewise.
(PACKET_LOSS): Likewise.
(PACKET_VNET_HDR): Likewise.
(PACKET_TX_TIMESTAMP): Likewise.
(PACKET_TIMESTAMP): Likewise.
(PACKET_FANOUT): Likewise.
(PACKET_TX_HAS_OFF): Likewise.
(PACKET_QDISC_BYPASS): Likewise.
(PACKET_ROLLOVER_STATS): Likewise.
(PACKET_FANOUT_DATA): Likewise.
(PACKET_MR_UNICAST): Likewise.
The implementations of strtol and related functions use
locale-specific conversions to upper case before determining whether a
character is a valid letter in the argument. This means that in
Turkish locales such as tr_TR.UTF-8 and tr_TR.ISO-8859-9, "i" is
interpreted as not being a valid number, when if the base passed to
strtol is 19 or more it should be interpreted as the number 18.
ISO C explicitly says "The letters from a (or A) through z (or Z) are
ascribed the values 10 through 35", so clearly intends the standard
ASCII letters (otherwise you wouldn't generally have exactly 26
letters to ascribe such values) (whereas white-space must be
identified according to the locale). In particular, 'i' and 'I' must
be understood to be in that sequence.
This patch makes the code do the case conversions and classification
in the C locale; the user's locale remains used for whitespace testing
(explicitly correct according to ISO C). Note that the way the code
worked, the only non-ASCII letter that would previously have been
accepted would have been the Turkish 'ı' (dotless 'i'), because the
uppercase version of that in Turkish locales is 'I'. This patch means
that will no longer be accepted, which seems appropriate.
Tested for x86_64 and x86.
[BZ #19242]
* stdlib/strtol_l.c (ISALPHA): Use _nl_C_locobj_ptr for locale.
(TOUPPER): Likewise.
* stdlib/tst-strtol-locale-main.c: New file.
* stdlib/tst-strtol-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-strtol-locale.out):
Depend on $(gen-locales).
* wcsmbs/tst-wcstol-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.UTF-8 and
tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstol-locale.out):
Depend on $(gen-locales).
Various math_private.h headers are guarded by "#ifndef
_MATH_PRIVATE_H", but never define the macro. Nothing else defines
the macro either (the generic math_private.h that they include defines
a different macro, _MATH_PRIVATE_H_), so those guards are ineffective.
With the recent inclusion of s_sin.c in s_sincos.c, this breaks the
build for MIPS, since the build of s_sincos.c ends up including
<math_private.h> twice and the MIPS version defines inline functions
such as libc_feholdexcept_mips, without a separate fenv_private.h
header with its own guards such as some architectures have.
This patch fixes all the problem headers to use architecture-specific
guard macro names, and to define those macros in the headers they
guard, just as some architectures already do.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch), and for mips64 (that it fixes the build).
* sysdeps/arm/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!ARM_MATH_PRIVATE_H].
[!ARM_MATH_PRIVATE_H] (ARM_MATH_PRIVATE_H): Define macro.
* sysdeps/hppa/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!HPPA_MATH_PRIVATE_H].
[!HPPA_MATH_PRIVATE_H] (HPPA_MATH_PRIVATE_H): Define macro.
* sysdeps/i386/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard
to [!I386_MATH_PRIVATE_H].
[!I386_MATH_PRIVATE_H] (I386_MATH_PRIVATE_H): Define macro.
* sysdeps/m68k/m680x0/fpu/math_private.h [!_MATH_PRIVATE_H]:
Change guard to [!M68K_MATH_PRIVATE_H].
[!M68K_MATH_PRIVATE_H] (M68K_MATH_PRIVATE_H): Define macro.
* sysdeps/microblaze/math_private.h [!_MATH_PRIVATE_H]: Change
guard to [!MICROBLAZE_MATH_PRIVATE_H].
[!MICROBLAZE_MATH_PRIVATE_H] (MICROBLAZE_MATH_PRIVATE_H): Define
macro.
* sysdeps/mips/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!MIPS_MATH_PRIVATE_H].
[!MIPS_MATH_PRIVATE_H] (MIPS_MATH_PRIVATE_H): Define macro.
* sysdeps/nios2/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!NIO2_MATH_PRIVATE_H].
[!NIO2_MATH_PRIVATE_H] (NIO2_MATH_PRIVATE_H): Define macro.
* sysdeps/tile/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!TILE_MATH_PRIVATE_H].
[!TILE_MATH_PRIVATE_H] (TILE_MATH_PRIVATE_H): Define macro.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Linux 2.6.32 and forward do not show the issue regarding SysV SIGCHLD
vs. SIG_IGN for nanosleep which make it feasible to use it for sleep
implementation without requiring any hacking to handle the spurious
wake up. The issue is likely being fixed before 2.6 and git
history [1] [2].
This patch simplifies the sleep code to call nanosleep directly by
using the posix default version. It also removes the early cancellation
tests for zero argument, since nanosleep will handle cancellation
in this case.
[1] https://lkml.org/lkml/2004/11/25/5
[2] https://lkml.org/lkml/2003/11/8/50
Checked on x86_64, ppc64le, and aarch64.
[BZ #16364]
* sysdeps/unix/sysv/linux/sleep.c: Remove file
* sysdeps/posix/sleep.c (__sleep): Simplify cancellation handling.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
__lll_trylock_elision sets the adapt_count variable too
aggressively, and incorrectly on persistent aborts. Taking
a cue from s390, adapt_count is only updated if the lock
is locked, or a persistent failure occurs.
In addition, the abort codes have been renumbered and
refactored for clarity. As it stands, glibc only cares
if the abort is persistent or not.
All aborts are now persistent, excepting a busy lock. This
includes changing _ABORT_NESTED_TRYLOCK into a persistent
abort.
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Fix setting of adapt_count.
* sysdeps/unix/sysv/linux/powerpc/htm.h
(_ABORT_PERSISTENT): Define to clarify persistent aborts.
(_ABORT_NESTED_TRYLOCK): Renumber, and make persistent.
(_ABORT_SYSCALL): Renumber, and clarify definition.
(_ABORT_LOCK_BUSY): Renumber, make non-persistent.
Kind of hokey, but errno.h drags in misc/sys/param.h which
defines MIN/MAX causing an error. Include system headers
first to grab MIN/MAX definition in param.h, and define
HAVE_ALLOCA to preserve existing behavior.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldl.c: Include gmp headers
after system headers to prevent MIN/MAX redefinition. Define
HAVE_ALLOCA to preserve builtin alloca usage.
Include the __sin and __cos functions as local static copies to allow
deper optimization of the functions. This change shows an improvement
of about 17% in the min case and 12.5% in the mean case for the sincos
microbenchmark on x86_64.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function
static and don't set or restore rounding.
(__cos)[IN_SINCOS]: Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c.
(__sincos): Set and restore rounding mode. Remove check for infinite
or NaN input.
Prevent function calls that don't return anything from being optimized
out by the compiler by marking its input variables as used.
This prevents the sincos function call from being optimized out in the
benchmark.
For ldbl-128ibm, if the result of strtold overflows in the final
conversion from MPN to IBM long double (because the exponent for a
106-bit IEEE result is 1023 but the high part would end up as
0x1p1024, which overflows), that conversion code fails to handle this
and produces an invalid long double value (high part infinite, low
part not zero) without raising exceptions or setting errno. This
patch adds an explicit check for this case to ensure an appropriate
result is returned in a way that ensures the right exceptions are
raised, with errno set.
Tested for powerpc.
[BZ #14551]
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: Include <errno.h>.
(__mpn_construct_long_double): If high part overflows to infinity,
set errno and recompute overflowed result of the correct sign.
* sysdeps/ieee754/ldbl-128ibm/Makefile
[$(subdir) = stdlib] (tests): Add tst-strtold-ldbl-128ibm.
[$(subdir) = stdlib] ($(objpfx)tst-strtold-ldbl-128ibm): Depend on
$(libm).
* sysdeps/ieee754/ldbl-128ibm/tst-strtold-ldbl-128ibm.c: New file.
The powerpc hard-float round and roundf functions, both 32-bit and
64-bit, raise spurious "inexact" exceptions for integer arguments from
adding 0.5 and rounding to integer toward zero.
Since these functions already save and restore the rounding mode, it's
natural to make them restore the full floating-point state instead to
fix this bug, which this patch does. The save of the state is moved
after the first floating-point operation on the input so that any
"invalid" exceptions from signaling NaN inputs are properly
preserved. As a consequence of this approach to the fix, "inexact"
for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11,
see bug 15479) is also avoided for these implementations; this is
*not* a general fix for bug 15479 since plenty of other
implementations of various functions still raise spurious "inexact"
for noninteger arguments.
This issue and fix do not apply to builds using power5+ versions of
round and roundf, which use the frin instruction and avoid "inexact"
exceptions that way.
This patch should get hard-float powerpc32 and powerpc64 (default
function implementations) back to a state where test-float and
test-double will pass after ulps regeneration.
Tested for powerpc32 and powerpc64.
[BZ #15479]
[BZ #19238]
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save
floating-point state after first operation on input. Restore full
state rather than just rounding mode.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
Similar to bug 19134 for powerpc32, the powerpc64 implementations of
lround, lroundf, llround, llroundf can raise spurious "inexact"
exceptions for integer arguments from adding 0.5 then converting to
integer (this does not apply to the power5+ version for double, which
uses the frin instruction which is defined never to raise "inexact"; I
don't know why power5+ doesn't use that version for float as well).
This patch fixes the bug in a similar way to the powerpc32 bug, by
testing for integers (adding and subtracting 2^52 and comparing with
the value before that addition and subtraction) and not adding 0.5 in
that case.
The powerpc maintainers may wish to look at making power5+ / power6x /
power8 use frin for float lround / llround as well as for double,
unless there's some reason I've missed that this isn't beneficial.
Tested for powerpc64.
[BZ #19235]
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Do not
add 0.5 to integer arguments.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf):
Likewise.
(.LC2): New object.
Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc
(both powerpc32 and powerpc64) hard-float implementations of
nearbyintf and nearbyint wrongly clear an "inexact" exception that was
raised before the function was called; this shows up as failure of the
test math/test-nearbyint-except added when that bug was fixed. They
also wrongly leave traps on "inexact" disabled if they were enabled
before the function was called.
This patch fixes the bugs similar to how the x86 bug was fixed: saving
and restoring the whole floating-point state, both to restore the
original "inexact" flag state and to restore the original state of
whether traps on "inexact" were enabled. Because there's a convenient
point in the powerpc implementations to save state after any sNaN
arguments will have raised "invalid" but before "inexact" traps need
to be disabled, no special handling for "invalid" is needed as in the
x86 version.
Tested for powerpc64 and powerpc32, where it fixes the
math/test-nearbyint-except failure as well as fixing the new test
math/test-nearbyint-except-2 added by this patch. Also tested for
x86_64 and x86 that the new test passes.
If powerpc experts see a more efficient way of doing this
(e.g. instruction positioning that's better for pipelines on typical
processors) then of course followups optimizing the fix are welcome.
[BZ #19228]
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save
and restore full floating-point state.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* math/test-nearbyint-except-2.c: New file.
* math/Makefile (tests): Add test-nearbyint-except-2.
This test applies to i386 and x86_64 which set R_386_GLOB_DAT and
R_X86_64_GLOB_DAT to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA.
[BZ #19178]
* sysdeps/x86/Makefile (tests): Add tst-prelink.
(tst-prelink-ENV): New.
($(objpfx)tst-prelink-conflict.out): Likewise.
($(objpfx)tst-prelink-cmp.out): Likewise.
(tests-special): Add $(objpfx)tst-prelink-cmp.out.
* sysdeps/x86/tst-prelink.c: New file.
* sysdeps/x86/tst-prelink.exp: Likewise.
Prompted by a gcc-patches discussion, this patch adds tests of pow for
the cases where pow (x, 0.5) is required to return a different result
from sqrt (x), as those cases were previously missing from the tests
(although they worked correctly).
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test_data): Add another test.
GLIBC fails to build for ia64 since commit d0d286d32d.
It is because this commit uses the internal definition for nearbyintl,
but ia64 specialized implementation (sysdeps/ia64/fpu/s_nearbyintl.S)
does not define it.
Tested with a ia64 build.
[BZ #19219]
* sysdeps/ia64/fpu/s_nearbyintl.S (__nearbyint): Define and
weak_alias to nearbyintl.
* elf/dl-load.c (_dl_map_object_from_fd): Add additional parameter
for original name of the DSO. Add it to the name list of the DSO
if it is actually given.
(_dl_map_object): Keep track of whether an audit module rewrote
the file name. If yes, pass the original name to
_dl_map_object_from_fd in a new parameter, otherwise NULL. When
debugging is enabled, log the change of the file name.
* sysdeps/mach/hur/dl-sysdep.c: Adjust commented-out call to
_dl_map_object_from_fd.
* elf/Makefile: Build and run tst-audit11 and tst-audit12.
* elf/tst-audit11.c: New file
* elf/tst-auditmod11.c: New file.
* elf/tst-audit11mod1.c: New file.
* elf/tst-audit11mod2.c: New file.
* elf/tst-audit11mod2.map: New file.
* elf/tst-audit12.c: New file
* elf/tst-auditmod12.c: New file.
* elf/tst-audit12mod1.c: New file.
* elf/tst-audit12mod2.c: New file.
* elf/tst-audit12mod2.map: New file.
* elf/tst-audit12mod3.c: New file.
For each function setjmp, longjmp, getcontext, there exist a symbol
<func> and a default/versioned symbol <func>@@GLIBC_2.x in the build
obj-files.
This is wrong because it should only exist an unversioned or a
default-versioned symbol with the same name in an obj-file.
Glibc can't be build with recent binutils. See the already fixed linker
bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073.
Nevertheless, this patch cleans this up.
Furthermore the BSD entry points setjmp, _setjmp were marked as weak,
but should be strong as on other architectures.
(see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an
older discussion with Andreas Schwab)
Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S,
too. But there is no change in the assembler code.
ChangeLog:
* sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp):
Don't create weak aliases,
because versioned symbols are created later.
* sysdeps/s390/s390-32/setjmp.S
(setjmp, _setjmp): Remove weak and rename to an unique name
in SHARED case due to existing versioned symbols.
* sysdeps/s390/s390-64/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S
(getcontext): Create weak alias only in non SHARED case.
* sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
this patch calls direct system calls for socket operations in the same way as power does. The system calls were introduced in kernel commit https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=977108f89c989b1eeb5c8d938e1e71913391eb5f.
There are no direct recv, send, accept syscalls available on s390. Thus
recvfrom, sendto, accept4 are called instead of the socketcall by defining __ASSUME_*_FOR_*_SYSCALL macros. See recv.c, send.c, accept.c in sysdeps/unix/sysv/linux/ folder.
The socketcalls in syscalls.list for s390-64 are removed. They were never used on s390x.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/kernel-features.h:
(__ASSUME_*_SYSCALL) Define new macros.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list:
Remove socketcall syscalls.
* sysdeps/unix/sysv/linux/accept.c (__libc_accept):
Use accept4 if defined __ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL.
* sysdeps/unix/sysv/linux/recv.c (__libc_recv):
Use recvfrom if defined __ASSUME_RECVFROM_FOR_RECV_SYSCALL.
* sysdeps/unix/sysv/linux/send.c (__libc_send):
Use sendto if defined __ASSUME_SENDTO_FOR_SEND_SYSCALL.
The recvmsg system calls for netlink sockets have been particularly
prone to picking up unrelated data after a file descriptor race
(where the descriptor is closed and reopened concurrently in a
multi-threaded process, as the result of a file descriptor
management issue elsewhere). This commit adds additional error
checking and aborts the process if a datagram of unexpected length
(without the netlink header) is received, or an error code which
cannot happen due to the way the netlink socket is used.
[BZ #12926]
Terminate process on invalid netlink response.
* sysdeps/unix/sysv/linux/netlinkaccess.h
(__netlink_assert_response): Declare.
* sysdeps/unix/sysv/linux/netlink_assert_response.c: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == inet]
(sysdep_routines): Add netlink_assert_response.
* sysdeps/unix/sysv/linux/check_native.c (__check_native): Call
__netlink_assert_response.
* sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise.
* sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise.
* sysdeps/unix/sysv/linux/Versions (GLIBC_PRIVATE): Add
__netlink_assert_response.
prelink runs ld.so with the environment variable LD_TRACE_PRELINKING
set to dump the relocation type class from _dl_debug_bindings. prelink
has the following relocation type classes:
#define RTYPE_CLASS_VALID 8
#define RTYPE_CLASS_PLT (8|1)
#define RTYPE_CLASS_COPY (8|2)
#define RTYPE_CLASS_TLS (8|4)
where ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has a conflict with
RTYPE_CLASS_TLS.
Since prelink only uses ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY
bits, we should clear the other bits when the DL_DEBUG_PRELINK bit is
set.
[BZ #19178]
* elf/dl-lookup.c (RTYPE_CLASS_VALID): New.
(RTYPE_CLASS_PLT): Likewise.
(RTYPE_CLASS_COPY): Likewise.
(RTYPE_CLASS_TLS): Likewise.
(_dl_debug_bindings): Use RTYPE_CLASS_TLS and RTYPE_CLASS_VALID
to set relocation type class for DL_DEBUG_PRELINK. Keep only
ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY bits for
DL_DEBUG_PRELINK.
