All binaries use TLS and thus need a properly set up TCB, so we can
simply return its address directly, instead of forwarding to the
libpthread implementation from libc.
For versioned symbols, the dynamic linker checks that the soname matches
the name supplied by the link editor, so a compatibility symbol in
libpthread is needed.
To avoid linking against the libpthread function in all cases, we would
have to bump the symbol version of libpthread in libc.so and supply a
compat symbol. This commit does not do that because the function
implementation is so small, so the overhead by two active copies of the
same function might well be smaller than the increase in symbol table
size.
function table, mangle the pointers.
* sysdeps/pthread/pthread-functions.h: Define PTHFCT_CALL.
* forward.c: Use PTHFCT_CALL and __libc_pthread_functions_init.
* sysdeps/pthread/bits/libc-lock.h: When using __libc_pthread_functions
demangle pointers before use.
* sysdeps/unix/sysv/linux/s390/jmp-unwind.c: Use PTHFCT_CALL to
demangle pointer.
* sysdeps/unix/sysv/linux/jmp-unwind.c: Likewise.
* sysdeps/pthread/setxid.h: Likewise.
2004-03-11 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S (__vfork): Use jgnl
instead of jnl instruction to jump to SYSCALL_ERROR_LABEL.
* sysdeps/unix/sysv/linux/s390/s390-64/pt-vfork.S (__vfork): Likewise.
2004-03-11 Jakub Jelinek <jakub@redhat.com>
* forward.c (__pthread_cond_broadcast_2_0,
__pthread_cond_destroy_2_0, __pthread_cond_init_2_0,
__pthread_cond_signal_2_0, __pthread_cond_wait_2_0,
__pthread_cond_timedwait_2_0): Use return 0 as defaction instead of 0.
2003-09-01 Thorsten Kukuk <kukuk@suse.de>
* nis/nss_compat/compat-spwd.c (getspnam_plususer): Return
NSS_STATUS_SUCCESS if entry was found.
(getspent_next_file): Store user in blacklist after entry
was found, use innetgr.
2003-09-01 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise.c: New.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise64.c: New.
* sysdeps/generic/dl-tls.c (_dl_determine_tlsoffset): Fix tls offset
computation for TCB_AT_TP. Support l_firstbyte_offset != 0 for
DTV_AT_TP, optimize.
* pthreadP.h (pthread_cond_2_0_t): New type.
(struct pthread_functions): Use new type for 2.0 condvar callbacks.
Use new type for the 2.0 condvar function prototypes.
* forward.c: Use pthread_cond_2_0_t for 2.0 condvar functions.
* old_pthread_cond_init.c: Use pthread_cond_2_0_t for condvar
parameter.
* old_pthread_cond_destroy.c: Likewise.
* old_pthread_cond_broadcast.c: Likewise. Lock appropriately.
* old_pthread_cond_signal.c: Likewise.
* old_pthread_cond_timedwait.c: Likewise.
* old_pthread_cond_wait.c: Likewise.
* sysdeps/i386/td_ta_map_lwp2thr.c: Moved from ../nptl_db.
* sysdeps/generic/td_ta_map_lwp2thr.c: New file.
* pthread_create.c (start_thread): Add missing & on __nptl_last_event.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (queue_stack): Don't remove stack from list here.
Do it in the caller. Correct condition to prematurely terminate
loop to free stacks.
(__deallocate_stack): Remove stack from list here.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-stack1.
* tst-stack1.c: New file.
* allocatestack.c (allocate_stack): Initialize the TCB on a user
provided stack.
* pthread_attr_getstack.c: Return bottom of the thread area.
2002-11-25 Ulrich Drepper <drepper@redhat.com>
* Makefile (libpthread-routines): Add pt-allocrtsig and
pthread_kill_other_threads.
* pt-allocrtsig.c: New file.
* pthread_kill_other_threads.c: New file.
* sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for
all three functions.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
allocrtsig.
* sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export
__libc_current_sigrtmin_private, __libc_current_sigrtmax_private,
and __libc_allocate_rtsig_private.
* Versions (libpthread): Export pthread_kill_other_threads_np,
__libc_current_sigrtmin, and __libc_current_sigrtmax.
2002-11-24 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (allocate_stack): stackaddr in attribute points to
the end of the stack. Adjust computations.
When mprotect call fails dequeue stack and free it.
* pthread_attr_setstack.c: Store top of the stack in stackaddr
attribute.
* pthread_getattr_np.c: Likewise.
* descr.h (IS_DETACHED): Add some more parenthesis to prevent
surprises.
2002-11-23 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/pthread.h (pthread_self): __THROW must come before
attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-11-22 Ulrich Drepper <drepper@redhat.com>
* pthread_getspecific.c: Optimize access to first 2nd-level array.
* pthread_setspecific.c: Likewise.
2002-11-21 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags
definitions. Get them from the official place.
* sysdeps/unix/sysv/linux/i386/fork.c: Likewise.
* sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags.
Use new CLONE_ flags in clone() calls.
* sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork.
* sysdeps/unix/sysv/linux/i386/fork.c: New file.
* Versions: Add pthread_* functions for libc.
* forward.c: New file.
* sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add
errno-loc.
* herrno.c: New file.
* res.c: New file.
* Makefile (libpthread-routines): Remove sem_post, sem_wait,
sem_trywait, and sem_timedwait. Add herrno and res.
* sem_init.c: Don't initialize lock and waiters members.
* sem_open.c: Likewise.
* sem_post.c: Removed.
* sem_wait.c: Removed.
* sem_trywait.c: Removed.
* sem_timedwait.c: Removed.
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite.
Includes full implementations of sem_post, sem_wait, sem_trywait,
and sem_timedwait.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust
for new implementation.
* sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock
and waiters fields.
* tst-sem3.c: Improve error message.
* tst-signal3.c: Likewise.
* init.c (__pthread_initialize_minimal): Use set_tid_address syscall
to tell the kernel about the termination futex and to initialize tid
member. Don't initialize main_thread.
* descr.h (struct pthread): Remove main_thread member.
* cancelllation.c (__do_cancel): Remove code handling main thread.
The main thread is not special anymore.
* allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add
size of the stacks to stack_cache_actsize.
* pt-readv.c: Add missing "defined".
* pt-sigwait.c: Likewise.
* pt-writev.c: Likewise.
2002-11-09 Ulrich Drepper <drepper@redhat.com>
* Versions: Export __connect from libpthread.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* Makefile (libpthread-routines): Add pt-raise.
* sysdeps/unix/sysv/linux/raise.c: New file.
* sysdeps/unix/sysv/linux/pt-raise.c: New file.
* sysdeps/generic/pt-raise.c: New file.
* pthread_cond_init.c: Initialize all data elements of the condvar
structure. Patch by Luca Barbieri <ldb@ldb.ods.org>.
* pthread_attr_init.c: Actually implement 2.0 compatibility version.
* pthread_create.c: Likewise.
* Makefile (tests): Add tst-key1, tst-key2, tst-key3.
* tst-key1.c: New file.
* tst-key2.c: New file.
* tst-key3.c: New file.
* Versions: Export pthread_detach for version GLIBC_2.0.
Reported by Saurabh Desai <sdesai@austin.ibm.com>.
2002-11-08 Ulrich Drepper <drepper@redhat.com>
* pthread_key_create.c: Terminate search after an unused key was found.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-10-10 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic
dynamic lookup for errno in PIC.
* allocatestack.c (get_cached_stack): Rearrange code slightly to
release the stack lock as soon as possible.
Call _dl_allocate_tls_init for TCB from the cache to re-initialize
the static TLS block.
(allocate_stack): Call _dl_allocate_tls_init for user-provided stack.
* cancellation.c: Renamed from cancelation.c.
* Makefile: Adjust accordingly.
* pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P.
* cleanup_defer.c: Use CANCELLATION_P.
* pthread_testcancel.c: Likewise.
* descr.h: Fix spelling in comments.
* init.c: Likewise.
* pthread_getattr_np.c: Likewise.
* pthread_getschedparam.c: Likewise.
* pthread_setschedparam.c: Likewise.
* Versions: Likewise.
* pt-pselect.c: New file.
* Makefile (libpthread-routines): Add pt-pselect.
* Versions: Add pselect.
* tst-cancel4.c: New file.
* Makefile (tests): Add tst-cancel4.
2002-10-09 Ulrich Drepper <drepper@redhat.com>
* pthread_mutex_lock.c: Always record lock ownership.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
* pt-readv.c: New file.
* pt-writev.c: New file.
* pt-creat.c: New file.
* pt-msgrcv.c: New file.
* pt-msgsnd.c: New file.
* pt-poll.c: New file.
* pt-select.c: New file.
* pt-sigpause.c: New file.
* pt-sigsuspend.c: New file.
* pt-sigwait.c: New file.
* pt-sigwaitinfo.c: New file.
* pt-waitid.c: New file.
* Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat,
pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend,
pt-sigwait, pt-sigwaitinfo, and pt-waitid.
* Versions: Add all the new functions.
* tst-exit1.c: New file.
* Makefile (tests): Add tst-exit1.
* sem_timedwait.c: Minor optimization for more optimal fastpath.
2002-10-08 Ulrich Drepper <drepper@redhat.com>
* pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW.
* pthread_join.c: Enable asynchronous cancellation around lll_wait_tid
call. pthread_join is an official cancellation point.
* pthread_timedjoin.c: Likewise.
* pthread_cond_wait.c: Revert order in which internal lock are dropped
and the condvar's mutex are retrieved.
* pthread_cond_timedwait.c: Likewise.
Reported by dice@saros.East.Sun.COM.
2002-10-07 Ulrich Drepper <drepper@redhat.com>
* pthreadP.h: Cut out all type definitions and move them...
* sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file.
* pthreadP.h: Include <internaltypes.h>.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little
performance tweaks.
* sem_trywait.c: Shuffle #includes around to get right order.
* sem_timedwait.c: Likewise.
* sem_post.c: Likewise.
* sem_wait.c: Likewise.
* nptl 0.3 released.
* Makefile (tests): Add tst-signal3.
* tst-signal3.c: New file.
2002-10-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that
the asms modify the sem object.
(__lll_sem_timedwait): Now takes struct sem* as first parameter.
* sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose
the actual members.
* pthreadP.h (struct sem): New type. Actual semaphore type.
* semaphoreP.h: Include pthreadP.h.
* sem_getvalue.c: Adjust to sem_t change.
* sem_init.c: Likewise.
* sem_open.c: Likewise.
* sem_post.c: Likewise.
* sem_timedwait.c: Likewise.
* sem_trywait.c: Likewise.
* sem_wait.c: Likewise.
2002-10-04 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3.
* tst-basic2.c: New file.
* tst-exec1.c: New file.
* tst-exec2.c: New file.
* tst-exec3.c: New file.
* tst-fork1.c: Remove extra */.
* nptl 0.2 released. The API for IA-32 is complete.
