Use dup2 syscall if defined, otherwise use dup3.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chmod syscall if defined, otherwise use fchmodat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use the generic implementation as the default, since the syscall
is supported by all architectures.
Also cleanup some headers and remove the INTERNAL_SYSCALL_ERROR_P
usage (the INTERNAL_SYSCALL_CALL macro already returns an negative
value if an error occurs).
The linux syscall ABI returns long, so the generic syscall code for
linux should use long for the return value.
This fixes the truncation of the return value of the syscall function
when that does not fit into an int.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently glibc uses in_time_t_range to detects time_t overflow,
and if it occurs fallbacks to 64 bit syscall version.
The function name is confusing because internally time_t might be
either 32 bits or 64 bits (depending on __TIMESIZE).
This patch refactors the in_time_t_range by replacing it with
in_int32_t_range for the case to check if the 64 bit time_t syscall
should be used.
The in_time_t range is used to detect overflow of the
syscall return value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Old applications pass __IPC_64 as part of the command argument because
old glibc did not check for unknown commands, and passed through the
arguments directly to the kernel, without adding __IPC_64.
Applications need to continue doing that for old glibc compatibility,
so this commit enables this approach in current glibc.
For msgctl and shmctl, if no translation is required, make
direct system calls, as we did before the time64 changes. If
translation is required, mask __IPC_64 from the command argument.
For semctl, the union-in-vararg argument handling means that
translation is needed on all architectures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
RISC-V architecture extends the cache information for level 3 cache
in AUX vector in Linux v.6.1-rc1. This patch supports sysconf to get
the level 3 cache information.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems") changed in_time_t_range to assume a 32-bit time_t. This broke
fstatat on MIPSn64 that was using it with a 64-bit time_t due to
difference between stat and stat64. This commit fix that by adding a
MIPSn64 specific version, which bypasses the EOVERFLOW tests.
Resolves: BZ #29730
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The extension header is two 32bit words and in the last header both
should be 0. There is plenty space in the __reserved area, but it's
better not to write more than we mean to.
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
Linux 6.0 adds a constant ADDRB, a termios c_cflag bit, to its
include/uapi/asm-generic/termbits-common.h.
Add it accordingly to glibc's bits/termios-c_cflag.h headers. As
other constants in these headers are generally in octal, I converted
the value to octal to match. As ADDRB isn't in a POSIX-reserved
namespace, I made it conditional on __USE_MISC.
Tested for x86_64.
The current macros uses pid as signed value, which triggers a compiler
warning for process and thread timers. Replace MAKE_PROCESS_CPUCLOCK
with static inline function that expects the pid as unsigned. These
are similar to what Linux does internally.
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.0. (There are no new
constants covered by these tests in 6.0 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.0 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.0.
Tested with build-many-glibcs.py.
Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This
requires emulate the semantic for hurd call (so __arc4random_buf
uses the fallback).
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.19 adds more HWCAP2_* values for AArch64; add these to its
bits/hwcap.h header in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
I.e. from sysdeps/unix/sysv/linux/bits/in.h to netinet/in.h
It is following both the BSD and Linux definitions.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
So far this test checks if pidfd_open-syscall is supported,
which was introduced with linux 5.3.
The process_madvise-syscall was introduced with linux 5.10.
Thus you'll get FAILs if you are running a kernel in between.
This patch adds a check if the first process_madvise-syscall
returns ENOSYS and in this case will fail with UNSUPPORTED.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
exit only terminates the current thread, not the whole process, so it
is the wrong fallback system call in this context. All supported
Linux versions implement the exit_group system call anyway.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 5.18. (There are no
new constants covered by these tests in 5.19, or in 5.17 or 5.18 in
the case of tst-mount-consts.py that previously used version 5.16,
that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.19 has no new syscalls, but enables memfd_secret in the uapi
headers for RISC-V. Update the version number in syscall-names.list
to reflect that it is still current for 5.19 and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
pidfd_getfd can fail for a valid pidfd with errno EPERM for various
reasons in a restricted environment. Use FAIL_UNSUPPORTED in that case.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit a06b40cdf5 updated stat.h to use
__USE_XOPEN2K8 instead of __USE_MISC to add the st_atim, st_mtim and
st_ctim members to struct stat. However, for microblaze, there are two
definitions of struct stat, depending on the __USE_FILE_OFFSET64 macro.
The second one was not updated.
Change __USE_MISC to __USE_XOPEN2K8 in the __USE_FILE_OFFSET64 version
of struct stat for microblaze.
The hppa port starts libc at GLIBC_2.2, but has earlier symbol
versions in other shared objects. This means that the compat
symbol for readdir64 is not actually present in libc even though
have-GLIBC_2.1.3 is defined as yes at the make level.
Fixes commit 15e50e6c96 ("Linux:
dirent/tst-readdir64-compat can be a regular test") by mostly
reverting it.
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
Before this the test fails if run in a chroot by a non-root user:
warning: could not become root outside namespace (Operation not permitted)
../sysdeps/unix/sysv/linux/tst-mount.c:36: numeric comparison failure
left: 1 (0x1); from: errno
right: 19 (0x13); from: ENODEV
error: ../sysdeps/unix/sysv/linux/tst-mount.c:39: not true: fd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:46: not true: r != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:48: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:52: numeric comparison failure
left: 1 (0x1); from: errno
right: 9 (0x9); from: EBADF
error: ../sysdeps/unix/sysv/linux/tst-mount.c:55: not true: mfd != -1
../sysdeps/unix/sysv/linux/tst-mount.c:58: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:61: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:65: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:68: not true: pfd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:75: not true: fd_tree != -1
../sysdeps/unix/sysv/linux/tst-mount.c:88: numeric comparison failure
left: 1 (0x1); from: errno
right: 38 (0x26); from: ENOSYS
error: 12 test failures
Checking that the test can enter a new mount namespace is more correct
than just checking the return value of support_become_root() as the test
code changes the mount namespace it runs in so running it as root on a
system that does not support mount namespaces should still skip.
Also change the test to remove the unnecessary fork.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with commit e070501d12
"Replace __libc_multiple_threads with __libc_single_threaded"
the testcases nptl/tst-cancel-self and
nptl/tst-cancel-self-cancelstate are failing.
This is fixed by only defining SINGLE_THREAD_BY_GLOBAL on s390x,
but not on s390.
Starting with commit 09c76a7409
"Linux: Consolidate {RTLD_}SINGLE_THREAD_P definition",
SINGLE_THREAD_BY_GLOBAL was defined in
sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h.
Lateron the commit 9a973da617
"s390: Consolidate Linux syscall definition" consolidates the sysdep.h files
from s390-32/s390-64 subdirectories. Unfortunately the macro is now always
defined instead of only on s390-64.
As information:
TLS_MULTIPLE_THREADS_IN_TCB is also only defined for s390.
See: sysdeps/s390/nptl/tls.h
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And also fixes the SINGLE_THREAD_P macro for SINGLE_THREAD_BY_GLOBAL,
since header inclusion single-thread.h is in the wrong order, the define
needs to come before including sysdeps/unix/sysdep.h. The macro
is now moved to a per-arch single-threade.h header.
The SINGLE_THREAD_P is used on some more places.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new mount API was added on Linux 5.2 with six new syscalls:
fsopen, fsconfig, fsmount, move_mount, fspick, and open_tree.
The new test verifies minimal functionality along with error paths
for specific arguments and their corner cases.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The new asymmetric mode is available when HWCAP2_MTE3 is set (support is
available), bit2 is set in the tunable (user request per application),
and the system is configured such that the asymmetric mode is preferred over
sync or async (per-cpu system-wide setting).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On success, mq_receive() and mq_timedreceive() return the number of
bytes in the received message, so it requires to check if the value
is larger than 0.
Checked on i686-linux-gnu.
These files simply include the sysdeps/posix implementations which would
be used even in the absence of the files. They have been unnecessary
since 7b17aeda0c when nice and signal were removed from the
syscalls.list file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This maintains compatibility between <sys/mman.h> and <linux/uio.h>.
Before that, the addition of process_madvise made those two header
files incompatible. This has been observed resulting in a build
failure in LLDB's Process/Linux/NativeRegisterContextLinux_s390x.cpp
source file.
Fixes commit d19ee3473d
("linux: Add process_madvise").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This definition is only used as a fallback with old kernel headers.
The change follows kernel commit bfdf4e6208051ed7165b2e92035b4bf11
("rseq: Remove broken uapi field layout on 32-bit little endian").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
LoongArch is going to be the first architecture supported by Linux that
has neither fstat* nor newfstatat [1], instead exclusively relying on
statx. So in fstatat64's implementation, we need to also enable statx
usage if neither fstatat64 nor newfstatat is present, to prepare for
this new case of kernel ABI.
[1]: https://lore.kernel.org/all/20220518092619.1269111-1-chenhuacai@loongson.cn/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.18 adds a constant MADV_DONTNEED_LOCKED (defined in multiple
header files, but with the same value on all architectures). Add this
constant to bits/mman-linux.h.
Tested for x86_64.
Linux 5.18 defines a new AArch64 HWCAP value HWCAP2_MTE3; add it to
glibc's sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 5.18. (There are no new constants covered
by these tests in 5.18, or in 5.17 in the case of tst-pidfd-consts.py
that previously used version 5.16, that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 5.18 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 5.18.
Tested with build-many-glibcs.py.
To check for the pidfd functions pidfd_open, pidfd_getfd, pid_send_signal,
and waitid with P_PIDFD.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.4 (3695eae5fee0605f316fbaad0b9e3de791d7dfaf)
to extend waitid to wait on pidfd.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is for bug 23293 and it relies on the glibc test system running
tests via explicit ld.so invokation by default.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
Currently on Linux __get_nprocs_conf first tries to enumerate the
cpus present in the system by iterating on /sys/devices/system/cpuX
directories. This only enumerates the CPUs that are present in
system (but possibly offline), not taking in account possible CPU
that might added in the system through hotplugging.
Linux provides the maximum number of configured cpus on the
/sys/devices/system/cpu file. Although it might present a larger
value of possible active CPUs on some system (where kernel either
get the information from firmaware or is configured at boot time),
the information is what kernel presents to userland.
This also change the returned value of _SC_NPROCESSORS_CONF, which
aligns as the maximum configure cpu in the system.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
And keep the previous definition if it exists. This allows
disabling IA64_USE_NEW_STUB while keeping USE_DL_SYSINFO defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike MMAP_CALL, this avoids a TCB dependency for an errno update
on failure.
<mmap_internal.h> cannot be included as is on several architectures
due to the definition of page_unit, so introduce a separate header
file for the definition of MMAP_CALL and MMAP_CALL_INTERNAL,
<mmap_call.h>.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
After 73fc4e28b9,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Compilers may decide to put the rfv variable in .data rather than on
the stack. It's slightly better to put it in .data.rel.ro.local
instead. Regardles of that, making it const may enable further
optimisations. Found when examining relative relocations (GOT ones
in particular) as part of enabling static-pie for PowerPC64.
The __closefrom_fallback tries to get a available file descriptor
if the initial open ("/proc/self/fd/", ...) fails. It assumes the
failure would be only if procfs is not mount (ENOENT), however if
the the proc file is not accessible (due some other kernel filtering
such apparmor) it will iterate over a potentially large file set
issuing close calls.
It should only try the close fallback if open returns EMFILE,
ENFILE, or ENOMEM.
Checked on x86_64-linux-gnu.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.17. (There are no new MAP_* constants covered by this test in
5.17 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
Remove libc-do-syscall from sysdep-dl-routines added by:
commit 3b33d6ed60
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Sun Jan 8 11:38:23 2017 -0200
Rework -fno-omit-frame-pointer support on i386
and use auto-generated io/rtld-libc-do-syscall.os instead. This fixes
BZ #28936.
And optimize it slightly.
This is commit 8c8510ab27 revised.
In _dl_aux_init in elf/dl-support.c, use an explicit loop
and -fno-tree-loop-distribute-patterns to avoid memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
1. Also generate .d dependency files for $(tests-container) and
$(tests-printers).
2. elf: Add tst-auditmod17.os to extra-test-objs.
3. iconv: Add tst-gconv-init-failure-mod.os to extra-test-objs.
4. malloc: Rename extra-tests-objs to extra-test-objs.
5. linux: Add tst-sysconf-iov_max-uapi.o to extra-test-objs.
6. x86_64: Add tst-x86_64mod-1.o, tst-platformmod-2.o, test-libmvec.o,
test-libmvec-avx.o, test-libmvec-avx2.o and test-libmvec-avx512f.o to
extra-test-objs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The current getcontext return trampoline is overly complex and it
unnecessarily clobbers several registers. By saving the context
pointer (r26) in the context, __getcontext_ret can restore any
registers not restored by setcontext. This allows getcontext to
save and restore the entire register context present when getcontext
is entered. We use the unused oR0 context slot for the return
from __getcontext_ret.
While this is not directly useful in C, it can be exploited in
assembly code. Registers r20, r23, r24 and r25 are not clobbered
in the call path to getcontext. This allows a small simplification
of swapcontext.
It also allows saving and restoring the 6-bit SAR register in the
LSB of the oSAR context slot. The getcontext flag value can be
stored in the MSB of the oSAR slot.
This change fixes the failure of stdlib/tst-setcontext2 and
stdlib/tst-setcontext7 on hppa. The implementation of swapcontext
in C is broken. C saves the return pointer (rp) and any non
call-clobbered registers (in this case r3, r4 and r5) on the
stack. However, the setcontext call in swapcontext pops the
stack and subsequent calls clobber the saved registers. When
the context in oucp is restored, both tests fault.
Here we rewrite swapcontext in assembly code to avoid using
the stack for register values that need to be used after
restoration. The getcontext and setcontext routines are
revised to save and restore register ret1 for normal returns.
We copy the oucp pointer to ret1. This allows access to
the old context after calling getcontext and setcontext.
On Microblaze only __NR_newselect is implemented, even though kernel
advertise __NR_select on asm/unistd.h. Since microblaze is the
only architecture that undef __ASSUME_PSELECT, the generic code
change is simpler than chaging the architecture syscall number.
Acked-by: Mark Hatle <mark.hatle@xilinx.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.16. (There are no new MAP_* constants covered by this test in
5.16 that need any other header changes.)
Tested with build-many-glibcs.py.
The kernel header might not define the SO_TIMESTAMP{NS}_OLD or
SO_TIMESTAMP{NS}_NEW if it older than v5.1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Otherwise, <dl-auxv.h> on POWER ends up being included twice,
once in dl-sysdep.c, once in dl-support.c. That leads to a linker
failure due to multiple definitions of _dl_cache_line_size.
Fixes commit d96d2995c1
("Revert "Linux: Consolidate auxiliary vector parsing").
This reverts commit 8c8510ab27. The
revert is not perfect because the commit included a bug fix for
_dl_sysdep_start with an empty argv, introduced in commit
2d47fa6862 ("Linux: Remove
DL_FIND_ARG_COMPONENTS"), and this bug fix is kept.
The revert is necessary because the reverted commit introduced an
early memset call on aarch64, which leads to crash due to lack of TCB
initialization.
And optimize it slightly.
The large switch statement in _dl_sysdep_start can be replaced with
a large array. This reduces source code and binary size. On
i686-linux-gnu:
Before:
text data bss dec hex filename
7791 12 0 7803 1e7b elf/dl-sysdep.os
After:
text data bss dec hex filename
7135 12 0 7147 1beb elf/dl-sysdep.os
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The generic version is the de-facto Linux implementation. It
requires an auxiliary vector, so Hurd does not use it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
get_nprocs() and get_nprocs_conf() use various methods to obtain an
accurate number of processors. Re-introduce __get_nprocs_sched() as
a source of information, and fix the order in which these methods are
used to return the most accurate information. The primary source of
information used in both functions remains unchanged.
This also changes __get_nprocs_sched() error return value from 2 to 0,
but all its users are already prepared to handle that.
Old fallback order:
get_nprocs:
/sys/devices/system/cpu/online -> /proc/stat -> 2
get_nprocs_conf:
/sys/devices/system/cpu/ -> /proc/stat -> 2
New fallback order:
get_nprocs:
/sys/devices/system/cpu/online -> /proc/stat -> sched_getaffinity -> 2
get_nprocs_conf:
/sys/devices/system/cpu/ -> /proc/stat -> sched_getaffinity -> 2
Fixes: 342298278e ("linux: Revert the use of sched_getaffinity on get_nproc")
Closes: BZ #28865
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 948ce73b31 made recvmsg/recvmmsg to always call
__convert_scm_timestamps for 64 bit time_t symbol, so adjust it to
always build it for __TIMESIZE != 64.
It fixes build for architecture with 32 bit time_t support when
configured with minimum kernel of 5.1.
Pass the actual number of bytes returned by the kernel.
Fixes: 33099d72e4 ("linux: Simplify get_nprocs")
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The timestamps created by __convert_scm_timestamps only make sense for
64 bit time_t programs, 32 bit time_t programs will ignore 64 bit time_t
timestamps since SO_TIMESTAMP will be defined to old values (either by
glibc or kernel headers).
Worse, if the buffer is not suffice MSG_CTRUNC is set to indicate it
(which breaks some programs [1]).
This patch makes only 64 bit time_t recvmsg and recvmmsg to call
__convert_scm_timestamps. Also, the assumption to called it is changed
from __ASSUME_TIME64_SYSCALLS to __TIMESIZE != 64 since the setsockopt
might be called by libraries built without __TIME_BITS=64. The
MSG_CTRUNC is only set for the 64 bit symbols, it should happen only
if 64 bit time_t programs run older kernels.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/systemd/systemd/pull/20567
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The __convert_scm_timestamps only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test checks if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The configure check for CAN_USE_REGISTER_ASM_EBP tried to compile a
simple function that uses %ebp as an inline assembly operand. If
compilation failed, CAN_USE_REGISTER_ASM_EBP was set 0, which
eventually had these consequences:
(1) %ebx was avoided as an inline assembly operand, with an
assembler macro hack to avoid unnecessary register moves.
(2) %ebp was avoided as an inline assembly operand, using an
out-of-line syscall function for 6-argument system calls.
(1) is no longer needed for any GCC version that is supported for
building glibc. %ebx can be used directly as a register operand.
Therefore, this commit removes the %ebx avoidance completely. This
avoids the assembler macro hack, which turns out to be incompatible
with the current Systemtap probe macros (which switch to .altmacro
unconditionally).
(2) is still needed in many build configurations. The existing
configure check cannot really capture that because the simple function
succeeds to compile, while the full glibc build still fails.
Therefore, this commit removes the check, the CAN_USE_REGISTER_ASM_EBP
macro, and uses the out-of-line syscall function for 6-argument system
calls unconditionally.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The __convert_scm_timestamps() only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test check if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
Indicates the availability of enhanced counter virtualization extension
of armv8.6-a with self-synchronized virtual counter CNTVCTSS_EL0 usable
in userspace.
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
Here we define the minumum linux kernel version at 5.4.0, as that is the
long term support version where 32-bit architectures start to support
64-bit time API's. The OpenRISC kernel had some bugs up until version 5.8
which caused issues with glibc fork/clone, they have been backported to
5.4 but not previous versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I've updated copyright dates in glibc for 2022. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2022 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
Commit a4b4131355 changed default __TIMESIZE to 64, however
it added sub-architecture timesize.h for powerpc, s390, and
sparc.
Also simplify mips by removing _MIPS_SIM usage (which would require
to add sgidefs inclusion.
When running tests on OpenRISC which has 32-bit wordsize but 64-bit
timesize it was found that O_LARGEFILE is not being set when calling
open64. For 64-bit architectures the O_LARGEFILE flag is generally
implied by the kernel according to force_o_largefile. However, for
32-bit architectures this is not done.
For this patch we unconditionally now set the O_LARGEFILE flag for
open64 class syscalls as there is no harm in doing so.
Tested on the OpenRISC the build works and timezone/tst-tzset passes
which was failing before. I would expect this also would fix arc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Implement vectorized tan/tanf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector tan/tanf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized erfc/erfcf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector erfc/erfcf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized asinh/asinhf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector asinh/asinhf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized tanh/tanhf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector tanh/tanhf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized erf/erff containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector erf/erff with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized acosh/acoshf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector acosh/acoshf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized atanh/atanhf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector atanh/atanhf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized log1p/log1pf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector log1p/log1pf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized log2/log2f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector log2/log2f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized log10/log10f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector log10/log10f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized atan2/atan2f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector atan2/atan2f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized cbrt/cbrtf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector cbrt/cbrtf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized sinh/sinhf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector sinh/sinhf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized expm1/expm1f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector expm1/expm1f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized cosh/coshf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector cosh/coshf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized exp10/exp10f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector exp10/exp10f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized exp2/exp2f containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector exp2/exp2f with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized hypot/hypotf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector hypot/hypotf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized asin/asinf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector asin/asinf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Implement vectorized atan/atanf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector atan/atanf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And use machine-sp.h instead. The Linux implementation is based on
already provided CURRENT_STACK_FRAME (used on nptl code) and
STACK_GROWS_UPWARD is replaced with _STACK_GROWS_UP.
In commit a92f4e6299 ("linux: Add time64
pselect support"), a Microblaze specific implementation of
__pselect32() was added to cover the case of kernels < 3.15 which lack
the pselect6 system call.
This new file sysdeps/unix/sysv/linux/microblaze/pselect32.c takes
precedence over the default implementation
sysdeps/unix/sysv/linux/pselect32.c.
However sysdeps/unix/sysv/linux/pselect32.c provides an implementation
of __pselect32() which is needed when __ASSUME_TIME64_SYSCALLS is not
defined. On Microblaze, which is a 32-bit architecture,
__ASSUME_TIME64_SYSCALLS is only true for kernels >= 5.1.
Due to sysdeps/unix/sysv/linux/microblaze/pselect32.c taking
precedence over sysdeps/unix/sysv/linux/pselect32.c, it means that
when we are with a kernel >= 3.15 but < 5.1, we need a __pselect32()
implementation, but sysdeps/unix/sysv/linux/microblaze/pselect32.c
doesn't provide it, and sysdeps/unix/sysv/linux/pselect32.c which
would provide it is not compiled in.
This causes the following build failure on Microblaze with for example
Linux kernel headers 4.9:
[...]/build/libc_pic.os: in function `__pselect64':
(.text+0x120b44): undefined reference to `__pselect32'
collect2: error: ld returned 1 exit status
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Implement vectorized acos/acosf containing SSE, AVX, AVX2 and
AVX512 versions for libmvec as per vector ABI. It also contains
accuracy and ABI tests for vector acos/acosf with regenerated ulps.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
When the clock_id is CLOCK_PROCESS_CPUTIME_ID or CLOCK_THREAD_CPUTIME_ID,
on the 5.10 kernel powerpc 32-bit, the 32-bit vDSO is executed successfully (
because the __kernel_clock_gettime in arch/powerpc/kernel/vdso32/gettimeofday.S
does not support these two IDs, the 32-bit time_t syscall will be used),
but tp32.tv_sec is equal to 0, causing the 64-bit time_t syscall to continue to be used,
resulting in two system calls.
Fix commit 72e84d1db2.
Signed-off-by: maminjie <maminjie2@huawei.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add the constant ARPHRD_MCTP, from Linux 5.15, to net/if_arp.h, along
with ARPHRD_CAN which was added to Linux in version 2.6.25 (commit
cd05acfe65ed2cf2db683fa9a6adb8d35635263b, "[CAN]: Allocate protocol
numbers for PF_CAN") but apparently missed for glibc at the time.
Tested for x86_64.
The RISC-V ABI [1] mandates that "the stack pointer shall be aligned to
a 128-bit boundary upon procedure entry". This as not the case in clone.
This fixes the misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests.
Fixes bug 28702.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
The syscall function does not allocate the extra stack frame for scv like other
assembly syscalls using DO_CALL_SCV. So after commit d120fb9941 changed the
offset that is used to save LR, syscall ended up using an invalid offset,
causing regressions on powerpc64. So make sure the extra stack frame is
allocated in syscall.S as well to make it consistent with other uses of
DO_CALL_SCV and avoid similar issues in the future.
Tested on powerpc, powerpc64, and powerpc64le (with and without scv)
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Due to PIE-by-default, PIC is now defined in more cases. libc.a
does not have _rtld_global_ro, and statically linking setcontext
fails. SHARED is the right condition to use, so that libc.a
references _dl_hwcap instead of _rtld_global_ro.
For static PIE support, the !SHARED case would still have to be made
PIC. This patch does not achieve that.
Fixes commit 23645707f1
("Replace --enable-static-pie with --disable-default-pie").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Remove the LD_PREFER_MAP_32BIT_EXEC environment variable support since
the first PT_LOAD segment is no longer executable due to defaulting to
-z separate-code.
This fixes [BZ #28656].
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This tunable allows applications to register the rseq area instead
of glibc.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The rseq area is placed directly into struct pthread. rseq
registration failure is not treated as an error, so it is possible
that threads run with inconsistent registration status.
<sys/rseq.h> is not yet installed as a public header.
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Programs without dynamic dependencies and without a program
interpreter are now run via execve.
Previously, the dynamic linker either crashed while attempting to
read a non-existing dynamic segment (looking for DT_AUDIT/DT_DEPAUDIT
data), or the self-relocated in the static PIE executable crashed
because the outer dynamic linker had already applied RELRO protection.
<dl-execve.h> is needed because execve is not available in the
dynamic loader on Hurd.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The syscall pipe2 was added in linux 2.6.27 and glibc requires linux
3.2.0. The patch removes the arch-specific implementation for alpha,
ia64, mips, sh, and sparc which requires a different kernel ABI
than the usual one.
Checked on x86_64-linux-gnu and with a build for the affected ABIs.
Variadic function calls in syscalls.list does not work for all ABIs
(for instance where the argument are passed on the stack instead of
registers) and might have underlying issues depending of the variadic
type (for instance if a 64-bit argument is used).
Checked on x86_64-linux-gnu.
The LFS prlimit64 requires a arch-specific implementation in
syscalls.list. Instead add a generic one that handles the
required symbol alias for __RLIM_T_MATCHES_RLIM64_T.
HPPA is the only outlier which requires a different default
symbol.
Checked on x86_64-linux-gnu and with build for the affected ABIs.
Passing 64-bit arguments on syscalls.list is tricky: it requires
to reimplement the expected kernel abi in each architecture. This
is way to better to represent in C code where we already have
macros for this (SYSCALL_LL64).
Checked on x86_64-linux-gnu.
Now that Hurd implementis both close_range and closefrom (f2c996597d),
we can make close_range() a base ABI, and make the default closefrom()
implementation on top of close_range().
The generic closefrom() implementation based on __getdtablesize() is
moved to generic close_range(). On Linux it will be overriden by
the auto-generation syscall while on Hurd it will be a system specific
implementation.
The closefrom() now calls close_range() and __closefrom_fallback().
Since on Hurd close_range() does not fail, __closefrom_fallback() is an
empty static inline function set by__ASSUME_CLOSE_RANGE.
The __ASSUME_CLOSE_RANGE also allows optimize Linux
__closefrom_fallback() implementation when --enable-kernel=5.9 or
higher is used.
Finally the Linux specific tst-close_range.c is moved to io and
enabled as default. The Linuxism and CLOSE_RANGE_UNSHARE are
guarded so it can be built for Hurd (I have not actually test it).
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a i686-gnu
build.
It requires less boilerplate code for newer ports. The _Static_assert
checks from internal setjmp are moved to its own internal test since
setjmp.h is included early by multiple headers (to generate
rtld-sizes.sym).
The riscv jmp_buf-macros.h check is also redundant, it is already
done by riscv configure.ac.
Checked with a build for the affected architectures.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.15. (There are no new MAP_* constants covered by this test in
5.15 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.15 has one new syscall, process_mrelease (and also enables the
clone3 syscall for RV32). It also has a macro __NR_SYSCALL_MASK for
Arm, which is not a syscall but matches the pattern used for syscall
macro names.
Add __NR_SYSCALL_MASK to the names filtered out in the code dealing
with syscall lists, update syscall-names.list for the new syscall and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
Since
commit d73f5331ce
Author: Roland McGrath <roland@gnu.org>
Date: Fri May 2 02:20:45 2003 +0000
2003-05-01 Roland McGrath <roland@redhat.com>
dependency is generated by passing -MD -MF to compiler. Remove the unused
+mkdep, +make-deps, s-proto.S and s-proto-cancel.S.
This fixes BZ #28554.
Compiling mmap_internal fails to compile when we use -1 for MMAP2_PAGE_UNIT
on 32 bit architectures. The error is as follows:
../sysdeps/unix/sysv/linux/mmap_internal.h:30:8: error: unknown type
name 'uint64_t'
|
30 | static uint64_t page_unit;
|
| ^~~~~~~~
Fix by adding including stdint.h.
A non-local STV_DEFAULT defined symbol is by default preemptible in a
shared object. j/jal cannot target a preemptible symbol. On other
architectures, such a jump instruction either causes PLT [BZ #18822], or
if short-ranged, sometimes rejected by the linker (but not by GNU ld's
riscv port [ld PR/28509]).
Use HIDDEN_JUMPTARGET to target a non-preemptible symbol instead.
With this patch, ld.so and libc.so can be linked with LLD if source
files are compiled/assembled with -mno-relax/-Wa,-mno-relax.
Acked-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
When LIBC_LINKER_FEATURE is used to check a linker option with the equal
sign, it will likely fail because the LD -v --help output may look like
`-z lam-report=[none|warning|error]` while the needle is something like
`-z lam-report=warning`.
The LD -v --help filter doesn't save much time, so just remove it.
According to C11 6.6p6, `const int` as an operand may not make up a
constant expression. GCC -O0 errors:
../sysdeps/unix/sysv/linux/opendir.c:107:19: error: static_assert expression is not an integral constant expression
_Static_assert (allocation_size >= sizeof (struct dirent64),
-O2 -Wpedantic has a similar warning.
See https://gcc.gnu.org/PR102502 for GCC's inconsistency.
Use enum which is guaranteed to be a constant expression.
This also makes the file compilable with Clang.
Fixes: 4b962c9e85 ("linux: Simplify opendir buffer allocation")
The powerpc optimization to provide a fast stacktrace requires some
ad-hoc code to handle Linux signal frames and the change is fragile
once the kernel decides to slight change its execution sequence [1].
The generic implementation work as-is and it should be future proof
since the kernel provides the expected CFI directives in vDSO shared
page.
Checked on powerpc-linux-gnu, powerpc64le-linux-gnu, and
powerpc64-linux-gnu.
[1] https://sourceware.org/pipermail/libc-alpha/2021-January/122027.html
This was found when testing the OpenRISC port I am working on. These
two tests fail with SIGSEGV:
FAIL: misc/tst-ntp_gettime
FAIL: misc/tst-ntp_gettimex
This was found to be due to the kernel overwriting the stack space
allocated by the timex structure. The reason for the overwrite being
that the kernel timex has 64-bit fields and user space code only
allocates enough stack space for timex with 32-bit fields.
On 32-bit systems with TIMESIZE=64 __USE_TIME_BITS64 is not defined.
This causes the timex structure to use 32-bit fields with type
__syscall_slong_t.
This patch adjusts the ifdef condition to allow 32-bit systems with
TIMESIZE=64 to use the 64-bit long long timex definition.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on
rtld.c due two issues:
1. RTLD_BOOTSTRAP is also used on dl-machine.h on various
architectures and it changes the semantics of various machine
relocation functions.
2. The elf_get_dynamic_info() change was done sideways, previously
to 490e6c62aa get-dynamic-info.h was included by the first
dynamic-link.h include *without* RTLD_BOOTSTRAP being defined.
It means that the code within elf_get_dynamic_info() that uses
RTLD_BOOTSTRAP is in fact unused.
To fix 1. this patch now includes dynamic-link.h only once with
RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have
the relocation fnctions with the expected semantics for the loader.
And to fix 2. part of 4af6982e4c is reverted (the check argument
elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP
pieces are removed.
To reorganize the includes the static TLS definition is moved to
its own header to avoid a circular dependency (it is defined on
dynamic-link.h and dl-machine.h requires it at same time other
dynamic-link.h definition requires dl-machine.h defitions).
Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL
are moved to its own header. Only ancient ABIs need special values
(arm, i386, and mips), so a generic one is used as default.
The powerpc Elf64_FuncDesc is also moved to its own header, since
csu code required its definition (which would require either include
elf/ folder or add a full path with elf/).
Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32,
and powerpc64le.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Building for nios2-linux-gnu has recently started showing a localplt
test failure, arising from a reference to __floatunsidf from
getloadavg after commit b5c8a3aa82
("Linux: implement getloadavg(3) using sysinfo(2)") (this is an
architecture with soft-fp in libc). Add this as a permitted local PLT
reference in localplt.data.
Tested with build-many-glibcs.py for nios2-linux-gnu.
Both new HWCAPs were introduced in these kernel commits:
- 7e8403ecaf884f307b627f3c371475913dd29292
"s390: add HWCAP_S390_PCI_MIO to ELF hwcaps"
- 7e82523f2583e9813e4109df3656707162541297
"s390/hwcaps: make sie capability regular hwcap"
Also note that the kernel commit 511ad531afd4090625def4d9aba1f5227bd44b8e
"s390/hwcaps: shorten HWCAP defines" has shortened the prefix of the macros
from "HWCAP_S390_" to "HWCAP_". For compatibility reasons, we do not
change the prefix in public glibc header file.
