I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
The glob might pass a different stat struct for gl_stat and gl_lstat
when GLOB_ALTDIRFUNC is used. This requires add a new 64-bit time
version that also uses 64-bit time stat functions.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Sync with gnulib 0e14f025d2.
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Use a 'char *', not a 'void *', in pointer
arithmetic.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Problem reported by Tim Rühsen [1]. Sync with gnulib 0e14f025d2.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2017-10/msg00054.html
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Do not pass NULL to mempcpy.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch follows commit 5554304f0 (posix: Allow glob to match dangling
symlinks [BZ #866]) by adding a compat symbol that follow previous
semantic of not following dangling symlinks and thus avoiding call
gl_lstat with GLOB_ALTDIRFUNC.
It avoids failure with old binaries that not set the alternate function
pointer for lstat (GNUmake for instance). The following scenario, for
instance, fails with current GNUmake because glibc will access unitialized
memory when calling gl_lstat:
$ cat src/t/t.c
int main ()
{
return 0;
}
$ cat Makefile
SRC = $(wildcard src/*/t.c)
OBJ = $(patsubst src/%.c, obj/%.o, $(SRC))
prog: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) $(LIBS) $(OBJ) -o prog
obj/%.o: src/%.c
$(CC) $(CFLAGS) -c $< -o $@
$ make
This works as expected with the patch applied. Since it is for generic
ABI, default compat symbols are added with override for Linux due LFS.
Now we have two compat symbols for glob on Linux:
1. sysdeps/unix/sysv/linux/oldglob.c which implements glob64 with
the old dirent layout. For this implementation I also set it to
not follow dangling symlinks (which is the safest path).
2. sysdeps/unix/sysv/linux/glob{64}-lstat-compat.c which implements
the compat symbol for dangling symlinks. As for generic glob,
the implementation uses XSTAT_IS_XSTAT64 to define whether
both __glob_lstat_compat and __glob64_lstat_compat should be
different implementations. For archictures that define
XSTAT_IS_XSTAT64, __glob_lstat_compat is aliased to
__glob64_lstat_compat.
3. sysdeps/unix/sysv/linux/alpha/oldglob.c with a different glob_t
layout. As for 1. this patch changes it to not follow dangling
symlinks.
The patch also bumps _GNU_GLOB_INTERFACE_VERSION to 2 to advertise the
new semantic. On GNUmake, for instance, it will force to it use its
internal glob implementation instead and avoiding triggering the same
failure on builds against newer GLIBCs.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
with a build against the major ABIs required to check for the abilist.
The changes should also work on gnulib (I run gnulib-tool.py check glob
and it shown no regressions).
[BZ #22183]
* include/gnu-versions.h (_GNU_GLOB_INTERFACE_VERSION): Increase
version to 2.
* posix/Makefile (routines): Add glob-lstat-compat and
glob64-lstat-compat.
* posix/Versions (GLIBC_2.27, glob, glob64): Add symbol version.
* posix/glob-lstat-compat.c: New file.
* posix/glob64-lstat-compat.c: Likewise.
* posix/tst-glob_lstat_compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob64-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob.c: Remove file.
* posix/glob.c (glob_lstat): New function.
(glob): Rename to __glob and add versioned symbol to 2.27.
(glob_in_dir): Use glob_lstat.
* posix/glob64.c (glob64): Add GLOB_ATTRIBUTE.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/glob.c (glob): Add versioned symbol for
2.27.
* sysdeps/unix/sysv/linux/glob64.c (glob64): Likewise.
* sysdeps/unix/sysv/linux/oldglob.c (GLOB_NO_LSTAT): Define.
* sysdeps/unix/sysv/linux/alpha/oldglob.c (__old_glob): Do not use
gl_lstat on glob call.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add GLIBC_2.27 glob
and glob64 symbols.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
This patch replaces the internal integer constant from
__glob_pattern_type return with a proper enum.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* posix/glob_internal.h (glob_pattern_type_t): New enumeration.
(__glob_pattern_type): Use __glob_pat_types.
* posix/glob_pattern_p.c (__glob_pattern_p): Likewise.
* posix/glob.c (glob): Likewise.
(glob_in_dir): Likewise.
Current glob implementation allows unlimited user name for home
directory construction on GLOB_TILDE case. To accomplish it glob
either construct a name on stack if size are small enough (based
on current alloca_used) or in heap otherwise.
This patch simplifies storage allocation by using the same scratch
buffer for both get_rlogin_r and getpwnam_r.
This also syncs with gnulib commit 064df0b (glob: fix bugs with long
login names).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* posix/glob.c (GET_LOGIN_NAME_MAX): Remove.
(glob): Use the same scratch buffer for both getlogin_r and
getpwnam_r. Don’t require preallocation of the login name. This
simplifies storage allocation, and corrects the handling of
long login names.
This patch fixes longstanding misuse of errno after getpwnam_r,
which returns an error number rather than setting errno. This is
sync with gnulib commit 5db9301.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/glob.c (glob): Port recent patches to platforms
lacking getpwnam_r.
(glob): Fix longstanding misuse of errno after getpwnam_r, which
returns an error number rather than setting errno.
This patch makes glob match dangling symlinks. Compared to other glob
implementation (*BSD, bash, musl, and other shells as well), GLIBC seems
the be the only one that does not match dangling symlinks. As for
comment #5 in BZ #866, POSIX does not have any strict specification for
dangling symlinks match and it is reasonable that trying to glob everything
in a path should return all types of files (such as for a 'rm *'). Also,
comment #7 shows even more example where GLIBC current behavior is
unexepected.
I avoided adding another GNU specific flag to set this behavior and
instead make it the default. Although this change the semanthic from
previous implementation, I think adding another compat symbol to be
really unecessary as from aforementioned reasons (current behavior not
defined in any standard, general idea of different implementation is
to list dangling symbols).
This also sync glob with gnulib commit fd1daf4 (glob: match dangling
symlinks).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #866]
[BZ #1062]
* posix/Makefile (tests): Remove bug-glob1 and tst-glob_symlinks.
* posix/bug-glob1.c: Remove file.
* posix/tst-glob_symlinks.c: New file.
* posix/glob.c (__lstat64): New macro.
(is_dir): New function.
(glob, glob_in_dir): Match symlinks even if they are dangling.
(link_stat, link_exists_p): Remove. All uses removed.
According to this kernel commit 2adc376c55194, d_ino 0 is a regular inode
number on Linux (which also matches POSIX, as it does not treat the value
as special). This patch makes glob accept is a valid inode number.
This is also a sync with gnulib commit c8e57c1.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
[BZ #19971]
* posix/glob.c (struct readdir_result): Remove skip_entry member.
(readdir_result_skip_entry, D_INO_TO_RESULT): Remove.
All uses removed.
This patch syncs posix/glob.c implementation with gnulib version
b5ec983 (glob: simplify symlink detection). The only difference
to gnulib code is
* DT_UNKNOWN, DT_DIR, and DT_LNK definition in the case there
were not already defined. Gnulib code which uses
HAVE_STRUCT_DIRENT_D_TYPE will redefine them wrongly because
GLIBC does not define HAVE_STRUCT_DIRENT_D_TYPE. Instead
the patch check for each definition instead.
Also, the patch requires additional globfree and globfree64 files
for compatibility version on some architectures. Also the code
simplification leads to not macro simplification (not need for
NO_GLOB_PATTERN_P anymore).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/Makefile (routines): Add globfree, globfree64, and
glob_pattern_p.
* posix/flexmember.h: New file.
* posix/glob_internal.h: Likewise.
* posix/glob_pattern_p.c: Likewise.
* posix/globfree.c: Likewise.
* posix/globfree64.c: Likewise.
* sysdeps/gnu/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* posix/glob.c (HAVE_CONFIG_H): Use !_LIBC instead.
[NDEBUG): Remove comments.
(GLOB_ONLY_P, _AMIGA, VMS): Remove define.
(dirent_type): New type. Use uint_fast8_t not
uint8_t, as C99 does not require uint8_t.
(DT_UNKNOWN, DT_DIR, DT_LNK): New macros.
(struct readdir_result): Use dirent_type. Do not define skip_entry
unless it is needed; this saves a byte on platforms lacking d_ino.
(readdir_result_type, readdir_result_skip_entry):
New functions, replacing ...
(readdir_result_might_be_symlink, readdir_result_might_be_dir):
these functions, which were removed. This makes the callers
easier to read. All callers changed.
(D_INO_TO_RESULT): Now empty if there is no d_ino.
(size_add_wrapv, glob_use_alloca): New static functions.
(glob, glob_in_dir): Check for size_t overflow in several places,
and fix some size_t checks that were not quite right.
Remove old code using SHELL since Bash no longer
uses this.
(glob, prefix_array): Separate MS code better.
(glob_in_dir): Remove old Amiga and VMS code.
(globfree, __glob_pattern_type, __glob_pattern_p): Move to
separate files.
(glob_in_dir): Do not rely on undefined behavior in accessing
struct members beyond their bounds. Use a flexible array member
instead
(link_stat): Rename from link_exists2_p and return -1/0 instead of
0/1. Caller changed.
(glob): Fix memory leaks.
* posix/glob64 (globfree64): Move to separate file.
* sysdeps/gnu/glob64.c (NO_GLOB_PATTERN_P): Remove define.
(globfree64): Remove hidden alias.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Add
oldglob.
* sysdeps/unix/sysv/linux/alpha/glob.c (__new_globfree): Move to
separate file.
* sysdeps/unix/sysv/linux/i386/glob64.c (NO_GLOB_PATTERN_P): Remove
define.
Move compat code to separate file.
* sysdeps/wordsize-64/glob.c (globfree): Move definitions to
separate file.
Instead, we store the data we need from the return value of
readdir in an object of the new type struct readdir_result.
This type is independent of the layout of struct dirent.
Previously, application code had to set up the d_namlen member if
the target supported it, involving conditional compilation. After
this change, glob will use the length of the string in d_name instead
of d_namlen to determine the file name length. All glibc targets
provide the d_type and d_ino members, and setting them as needed for
gl_readdir is straightforward.
Changing the behavior with regards to d_ino is left to a future
cleanup.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
Various functions in XPG4 bring in references to getlogin_r, which is
not in XPG4; this is also a bug for some older POSIX versions which
aren't yet covered by the linknamespace tests. This patch fixes this
by making getlogin_r into a weak alias for __getlogin_r and using
__getlogin_r as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18527]
* login/getlogin_r.c (getlogin_r): Rename to __getlogin_r and
define as weak alias of __getlogin_r. Use libc_hidden_weak.
* sysdeps/mach/hurd/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/sysv/linux/getlogin_r.c (getlogin_r): Likewise.
* include/unistd.h (__getlogin_r): Declare. Use
libc_hidden_proto.
* posix/glob.c (glob): Call __getlogin_r instead of getlogin_r.
* conform/Makefile (test-xfail-XPG3/glob.h/linknamespace): Remove
variable.
(test-xfail-XPG3/wordexp.h/linknamespace): Likewise.
(test-xfail-XPG4/glob.h/linknamespace): Likewise.
(test-xfail-XPG4/wordexp.h/linknamespace): Likewise.
Colin Watson reported that some versions of gcc warn about
attribute leaf used on a static function, since it has no
effect on anything but external functions.
* posix/glob.c (next_brace_sub, prefix_array, collated_compare):
Use __THROWNL rather than __THROW on static functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
