Before this change, if glibc was compiled with SSE instructions and a
sufficiently recent GCC, an unaligned stack access in
__run_exit_handlers would cause stdlib/tst-makecontext to crash.
Changelog:
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c (__old_getrlimit64):
Drop __RLIM_T_MATCHES_RLIM64_T conditional as __old_getrlimit64 is
never defined in that case.
Changelog:
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Fix a typo in the
comment.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Fix a typo in the
comment.
(settrlimit): Rename into setrlimit.
(__sttrlimit): Rename into __setrlimit.
Move a shared part of sys/ptrace.h which is the same on all
architectures to a separate file.
* sysdeps/unix/sysv/linux/sys/ptrace.h: Include <bits/ptrace-shared.h>.
(__ptrace_setoptions, __ptrace_eventcodes, __ptrace_peeksiginfo_args,
__ptrace_peeksiginfo_flags, ptrace): Move to ...
* sysdeps/unix/sysv/linux/bits/ptrace-shared.h: ... new file.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/ptrace-shared.h.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Include
<bits/ptrace-shared.h>.
(__ptrace_setoptions, __ptrace_eventcodes, __ptrace_peeksiginfo_args,
__ptrace_peeksiginfo_flags, ptrace): Remove.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h: Likewise.
libio.h was originally the header for a set of supported GNU
extensions, but they have not been maintained as such in many years,
they are now standing in the way of improvements to stdio, and we
don't think there are any remaining external users. _G_config.h was
never intended for public use, but predates the bits convention.
Move both of these headers into the bits directory and provide stubs
at top level which issue deprecation warnings.
The contents of (bits/)libio.h and (bits/)_G_config.h are still
exposed to external software via stdio.h; changing that requires more
complex surgery than I have time to attempt right now.
* libio/libio.h, libio/_G_config.h: New stub headers which issue a
deprecation warning and then include <bits/libio.h>, <bits/_G_config.h>
respectively.
* libio/libio.h: Rename the original version of this file to
libio/bits/libio.h. Error out if not included by stdio.h or the
stub libio.h.
* include/libio.h: Move to include/bits. Forward to libio/bits/libio.h.
* sysdeps/generic/_G_config.h: Move to top-level bits/. Error out
if not included by bits/libio.h or the stub _G_config.h.
* sysdeps/unix/sysv/linux/_G_config.h: Move to
sysdeps/unix/sysv/linux/bits. Error out if not included by
bits/libio.h or the stub _G_config.h.
* libio/stdio.h: Include bits/libio.h, not libio.h.
* libio/Makefile: Install bits/libio.h and bits/_G_config.h as
well as libio.h and _G_config.h.
* csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c
* libio/strfile.h, stdio-common/vfscanf.c
* sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c
Include stdio.h, not _G_config.h nor libio.h.
* libio/iofgetpos.c: Also rename fgetpos64 out of the way.
* libio/iofsetpos.c: Also rename fsetpos64 out of the way.
* scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
With tilepro removal, the uppercase instruction are not anymore
required to be defines as potentially macros. This is a
mechanical change done by the following shell script:
---
INSNS="LD LD4U ST ST4 BNEZ BEQZ BEQZT BGTZ CMPEQI CMPEQ CMOVEQZ CMOVNEZ"
FILES=$(find sysdeps/tile sysdeps/unix/sysv/linux/tile -iname *.S)
for insn in $INSNS; do
repl=$(echo $insn | tr '[:upper:]' '[:lower:]')
sed -i 's/\b'$insn'\b/'$repl'/g' $FILES
done
---
Checked with a build for tilegx-linux-gnu and tilegx-linux-gnu-32 with
and without the patch, there is no difference in generated binary with
a dissassemble.
* sysdeps/tile/__longjmp.S (__longjmp): Use lowercase instructions.
* sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise.
* sysdeps/tile/_mcount.S (__mcount): Likewise.
* sysdeps/tile/crti.S (_init, _fini): Likewise.
* sysdeps/tile/crtn.S: Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/tile/dl-trampoline.S: Likewise.
* sysdeps/tile/setjmp.S (__sigsetjmp): Likewise.
* sysdeps/tile/start.S (_start): Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S (_clone): Likewise.
* sysdeps/unix/sysv/linux/tile/getcontext.S (__getcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/ioctl.S (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/tile/setcontext.S (__setcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/swapcontext.S (__swapcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/syscall.S (syscall): Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S (__vfork): Likewise.
With tilepro support removal we can now simplify internal tile support by
moving the directory structure to avoid the unnecessary directory levels
in tile/tilegx both on generic and linux folders.
Checked with a build for tilegx-linux-gnu and tilegx-linux-gnu-32 with
and without the patch, there is no difference in generated binary with
a dissassemble.
* stdlib/bug-getcontext.c (do_test): Remove tilepro mention in
comment.
* sysdeps/tile/preconfigure: Remove tilegx folder.
* sysdeps/tile/tilegx/Implies: Move definitions to ...
* sysdeps/tile/Implies: ... here.
* sysdeps/tile/tilegx/Makefile: Move rules to ...
* sysdeps/tile/Makefile: ... here.
* sysdeps/tile/tilegx/atomic-machine.h: Move definitions to ...
* sysdeps/tile/atomic-machine.h: ... here. Add include guards.
* sysdeps/tile/tilegx/bits/wordsize.h: Move to ...
* sysdeps/tile/bits/wordsize.h: ... here.
* sysdeps/tile/tilegx/*: Move to ...
* sysdeps/tile/*: ... here.
* sysdeps/tile/tilegx/tilegx32/Implies: Move to ...
* sysdeps/tile/tilegx32/Implies: ... here.
* sysdeps/tile/tilegx/tilegx64/Implies: Move to ...
* sysdeps/tile/tilegx64/Implies: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/Makefile: Move definitions
to ...
* sysdeps/unix/sysv/linux/tile/Makefile: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/*: Move to ...
* sysdeps/unix/sysv/linux/tile/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx32/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx64/*: ... here.
This patch consolidates the pthread_join and gnu extensions to avoid
code duplication. The function pthread_join, pthread_tryjoin_np, and
pthread_timedjoin_np are now based on pthread_timedjoin_ex.
It also fixes some inconsistencies on ESRCH, EINVAL, EDEADLK handling
(where each implementation differs from each other) and also on
clenup handler (which now always use a CAS).
Checked on i686-linux-gnu and x86_64-linux-gnu.
* nptl/pthreadP.h (__pthread_timedjoin_np): Define.
* nptl/pthread_join.c (pthread_join): Use __pthread_timedjoin_np.
* nptl/pthread_tryjoin.c (pthread_tryjoin): Likewise.
* nptl/pthread_timedjoin.c (cleanup): Use CAS on argument setting.
(pthread_timedjoin_np): Define internal symbol and common code from
pthread_join.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (__lll_timedwait_tid):
Remove superflous checks.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (__lll_timedwait_tid):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since 3f823e87cc (Call exit directly in clone (BZ #21512)) SH clone
implementation fails to set the exit code resulting in the failures:
FAIL: nptl/tst-align-clone
FAIL: nptl/tst-getpid1
This patch fixes the both testcases.
[BZ #22605]
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Fix exit return
code.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support shadow stack in Intel Control-flow Enforcemen Technology.
Since the cancel_jmp_buf array is passed to setjmp and longjmp by
casting it to pointer to struct __jmp_buf_tag, it should be as large
as struct __jmp_buf_tag. Otherwise when shadow stack is enabled,
setjmp and longjmp will write and read beyond cancel_jmp_buf when saving
and restoring shadow stack pointer.
This patch adds bits/types/__cancel_jmp_buf_tag.h to define struct
__cancel_jmp_buf_tag so that Linux/x86 can add saved_mask to
cancel_jmp_buf.
Tested natively on i386, x86_64 and x32. Tested hppa-linux-gnu with
build-many-glibcs.py.
[BZ #22563]
* bits/types/__cancel_jmp_buf_tag.h: New file.
* sysdeps/unix/sysv/linux/x86/bits/types/__cancel_jmp_buf_tag.h
* sysdeps/unix/sysv/linux/x86/pthreaddef.h: Likewise.
* sysdeps/unix/sysv/linux/x86/nptl/pthreadP.h: Likewise.
* nptl/Makefile (headers): Add
bits/types/__cancel_jmp_buf_tag.h.
* nptl/descr.h [NEED_SAVED_MASK_IN_CANCEL_JMP_BUF]
(pthread_unwind_buf): Add saved_mask to cancel_jmp_buf.
* sysdeps/nptl/pthread.h: Include
<bits/types/__cancel_jmp_buf_tag.h>.
(__pthread_unwind_buf_t): Use struct __cancel_jmp_buf_tag with
__cancel_jmp_buf.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Likewise.
When running strace, IPC_64 was set in the command, but ia64 is
an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set
in the kernel, so ipc_parse_version just returns IPC_64 without
clearing the IPC_64 bit in the command.
* sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining
__IPC_64 to 0 to avoid IPC_64 being set.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On s390, GDB fails to show the complete backtrace from within vdso functions.
The macro INTERNAL_VSYSCALL_CALL saves the return address in r14 to r10
before branching to the vdso function. The branch-instruction updates r14
in order to let the vdso function return. Then the original address in r14 is
restored from r10. Unfortunately, there are no cfi-rules and GDB fails.
Furthermore the call of the vdso function does not comply with the s390 ABI
as no stack-frame for the vdso-function is generated.
This patch removes the s390 specific macro INTERNAL_VSYSCALL_CALL
and the common implementation in sysdeps/unix/sysv/linux/sysdep-vdso.h is used.
Then the vdso function is called via function-pointer and GCC generates a
new stack-frame and emits all needed cfi-rules.
The defines CLOBBER_[0-6] are removed as they were only used in macro
INTERNAL_VSYSCALL_CALL.
The macro INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is not used on s390.
The only user is power. Thus it is removed from s390 sysdep.h.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(INTERNAL_VSYSCALL_CALL, CLOBBER_0, CLOBBER_1, CLOBBER_2,
CLOBBER_3, CLOBBER_4, CLOBBER_5, CLOBBER_6,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
To support Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) in setjmp/longjmp, we need to save shadow stack
pointer in jmp_buf. The __saved_mask field in jmp_buf has type
of __sigset_t. On Linux, __sigset_t is defined as
#define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
typedef struct
{
unsigned long int __val[_SIGSET_NWORDS];
} __sigset_t;
which is much bigger than expected by the __sigprocmask system call,
which has
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
For Linux/x86, we can shrink __sigset_t used by __saved_mask in jmp_buf
to add paddings for shadow stack pointer. As long as the new __sigset_t
is not smaller than sigset_t expected by the __sigprocmask system call,
it should work correctly.
This patch adds an internal header file, <setjmpP.h>, to define
__jmp_buf_sigset_t for __saved_mask in jmp_buf for Linux/x86 with a
space to store shadow stack pointer. It verifies __jmp_buf_sigset_t has
the suitable size for the __sigprocmask system call. A run-time test,
tst-saved_mask-1.c, is added to verify that size of __jmp_buf_sigset_t
is sufficient. If its size is too small, the test fails with
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, NULL, 0x7fa8aa28effc, 8) = -1 EFAULT (Bad address)
exit_group(1) = ?
Tested with build-many-glibcs.py.
* debug/longjmp_chk.c: Include <setjmpP.h> instead of
<setjmp.h>.
* setjmp/longjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__libc_siglongjmp): Cast &env[0].__saved_mask to "sigset_t *".
* setjmp/sigjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__sigjmp_save): Cast &env[0].__saved_mask to "sigset_t *".
* sysdeps/generic/setjmpP.h: New file.
* sysdeps/unix/sysv/linux/x86/jmp_buf-ssp.sym: Likewise.
* sysdeps/unix/sysv/linux/x86/setjmpP.h: Likewise.
* sysdeps/unix/sysv/linux/x86/tst-saved_mask-1.c: Likewise.
* sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers):
Add jmp_buf-ssp.sym.
(tests): Add tst-saved_mask-1.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes s390 libm function implementations use
libm_alias_double to define function aliases. This allows
sysdeps/unix/sysv/linux/s390/fpu/s_fma.c to be removed, as
libm_alias_double handles symbol versioning for long double compat
symbols.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/unix/sysv/linux/s390/fpu/s_fma.c: Remove.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This header file enables sharing of portable declarations and
definitions across all Linux architectures, including hppa (which does
not use <bits/mman-linux.h>).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since
commit 8b0e795aaa
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Wed Nov 1 11:49:05 2017 -0200
Simplify Linux sig{timed}wait{info} implementations
sigwait can fail with EINTR. Applications do not expect that, and the
error code is not documented in POSIX or the manual pages.
This commit restores the previous behavior by retrying the system call
on EINTR. It also returns the error code, not -1, on the remaing
errors.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Building glibc with current mainline GCC fails, among other reasons,
because of an error for use of strlen on the nonstring ut_user field.
This patch changes the problem code in getlogin_r to use __strnlen
instead. It also needs to set the trailing NUL byte of the result
explicitly, because of the case where ut_user does not have such a
trailing NUL byte (but the result should always have one).
Tested for x86_64. Also tested that, in conjunction with
<https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html>, it fixes
the build for arm with mainline GCC.
[BZ #22447]
* sysdeps/unix/getlogin_r.c (__getlogin_r): Use __strnlen not
strlen to compute length of ut_user and set trailing NUL byte of
result explicitly.
This patch updates the hppa bits/mman.h based on Linux 4.14. Some
MADV_* macros are removed in Linux 4.14 as unused/unimplemented, so
this patch removes them from glibc, while adding two new macros added
in Linux 4.14.
Tested (compilation only) for hppa with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h
[__USE_MISC] (MADV_SPACEAVAIL): Remove macro.
[__USE_MISC] (MADV_VPS_PURGE): Likewise.
[__USE_MISC] (MADV_VPS_INHERIT): Likewise.
[__USE_MISC] (MADV_HWPOISON): New macro.
[__USE_MISC] (MADV_SOFT_OFFLINE): Likewise.
GDB failed to detect the outermost frame while showing the backtrace
within a thread:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
Before this patch, the start routines like thread_start had no cfi information.
GDB is then using the prologue unwinder if no cfi information is available.
This unwinder tries to unwind r15 and stops e.g. if r15 was updated or
on some jump-instructions.
On older glibc-versions (before commit "Remove cached PID/TID in clone"
c579f48edb), the thread_start function used
such a jump-instruction and GDB did not fail with an error.
This patch adds cfi information for _start, thread_start and __makecontext_ret
and marks r14 as undefined which marks the frame as outermost frame and GDB
stops the backtrace. Also tested different gcc versions in order to test
_Unwind_Backtrace() in libgcc as this is used by backtrace() in glibc.
ChangeLog:
* sysdeps/s390/s390-64/start.S (_start): Add cfi information for r14.
* sysdeps/s390/s390-32/start.S: (_start): Likewise
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S
(__makecontext_ret): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Likewise.
This patch adds the HWCAP_DCPOP macro from Linux 4.14 to the AArch64
bits/hwcap.h.
Tested (compilation only) for aarch64 with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_DCPOP): New
macro.
This patch adds ARPHRD_RAWIP from Linux 4.14 to the Linux
net/if_arp.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/net/if_arp.h (ARPHRD_RAWIP): New macro.
Linux 4.14 does not add any new syscalls; this patch updates the
version number in syscall-names.list to reflect that it's still
current for 4.14.
Tested for x86_64 (compilation with build-many-glibcs.py, using Linux
4.14).
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.14.
of the strncat and strncpy function that may result in truncating
the copied string before the terminating NUL. To avoid false positive
warnings for correct code that intentionally creates sequences of
characters that aren't guaranteed to be NUL-terminated, arrays that
are intended to store such sequences should be decorated with a new
nonstring attribute. This change add this attribute to Glibc and
uses it to suppress such false positives.
ChangeLog:
* misc/sys/cdefs.h (__attribute_nonstring__): New macro.
* sysdeps/gnu/bits/utmp.h (struct utmp): Use it.
* sysdeps/unix/sysv/linux/s390/bits/utmp.h (struct utmp): Same.
Add a new tst-ttyname test that includes several named sub-testcases.
This patch is ordered after the patches with the fixes that it tests for (to
avoid breaking `git bisect`), but for reference, here's how each relevant change
so far affected the testcases in this commit, starting with
15e9a4f378:
| | before | | make checks | don't |
| | 15e9a4f | 15e9a4f | consistent | bail |
|---------------------------------+---------+---------+-------------+-------|
| basic smoketest | PASS | PASS | PASS | PASS |
| no conflict, no match | PASS[1] | PASS | PASS | PASS |
| no conflict, console | PASS | FAIL! | FAIL | PASS! |
| conflict, no match | FAIL | PASS! | PASS | PASS |
| conflict, console | FAIL | FAIL | FAIL | PASS! |
| with readlink target | PASS | PASS | PASS | PASS |
| with readlink trap; fallback | FAIL | FAIL | FAIL | PASS! |
| with readlink trap; no fallback | FAIL | PASS! | PASS | PASS |
| with search-path trap | FAIL | FAIL | PASS! | PASS |
|---------------------------------+---------+---------+-------------+-------|
| | 4/9 | 5/9 | 6/9 | 9/9 |
[1]: 15e9a4f introduced a semantic that, under certain failure
conditions, ttyname sets errno=ENODEV, where previously it didn't
set errno; it's not quite fair to hold "before 15e9a4f" ttyname to
those new semantics. This testcase actually fails, but would have
passed if we tested for the old the semantics.
Each of the failing tests before 15e9a4f are all essentially the same bug: that
it returns a PTY slave with the correct minor device number, but from the wrong
devpts filesystem instance.
15e9a4f sought to fix this, but missed several of the cases that can cause this
to happen, and also broke the case where both the erroneous PTY and the correct
PTY exist.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Commit 15e9a4f378 introduced logic for ttyname()
sending back ENODEV to signal that we can't get a name for the TTY because we
inherited it from a different mount namespace.
However, just because we inherited it from a different mount namespace and it
isn't available at its original path, doesn't mean that its name is unknowable;
we can still try to find it by allowing the normal fall back on iterating
through devices.
An example scenario where this happens is with "/dev/console" in containers.
It's a common practice among container managers to allocate a PTY master/slave
pair in the host's mount namespace (the slave having a path like "/dev/pty/$X"),
bind mount the slave to "/dev/console" in the container's mount namespace, and
send the slave FD to a process in the container. Inside of the
container, the slave-end isn't available at its original path ("/dev/pts/$X"),
since the container mount namespace has a separate devpts instance from the host
(that path may or may not exist in the container; if it does exist, it's not the
same PTY slave device). Currently ttyname{_r} sees that the file at the
original "/dev/pts/$X" path doesn't match the FD passed to it, and fails early
and gives up, even though if it kept searching it would find the TTY at
"/dev/console". Fix that; don't have the ENODEV path force an early return
inhibiting the fall-back search.
This change is based on the previous patch that adds use of is_mytty in
getttyname and getttyname_r. Without that change, this effectively reverts
15e9a4f, which made us disregard the false similarity of file pointed to by
"/proc/self/fd/$Y", because if it doesn't bail prematurely then that file
("/dev/pts/$X") will just come up again anyway in the fall-back search.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
In the ttyname and ttyname_r routines on Linux, at several points it needs to
check if a given TTY is the TTY we are looking for. It used to be that this
check was (to see if `maybe` is `mytty`):
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#else
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
#endif
This check appears in several places.
Then, one of the changes made in commit 15e9a4f378
was to change that check to:
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#endif
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
That is, it made the st_ino and st_dev parts of the check happen even if we have
the st_rdev member. This is an important change, because the kernel allows
multiple devpts filesystem instances to be created; a device file in one devpts
instance may share the same st_rdev with a file in another devpts instance, but
they aren't the same file.
This check appears twice in each file (ttyname.c and ttyname_r.c), once (in
ttyname and __ttyname_r) to check if a candidate file found by inspecting /proc
is the desired TTY, and once (in getttyname and getttyname_r) to check if a
candidate file found by searching /dev is the desired TTY. However, 15e9a4f
only updated the checks for files found via /proc; but the concern about
collisions between devpts instances is just as valid for files found via /dev.
So, update all 4 occurrences the check to be consistent with the version of the
check introduced in 15e9a4f. Make it easy to keep all 4 occurrences of the
check consistent by pulling it in to a static inline function, is_mytty.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
is_pty returning a bool is fine since there's no possible outcome other than
true or false, and bool is used throughout the codebase.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Linux 4.10 moved many of the documentation files around.
4.10 came out between the time the patch adding the comment (commit
15e9a4f378) was submitted and the time
it was applied (in February, January, and March 2017; respectively).
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch adds the new MSG_ZEROCOPY constant from Linux 4.14 to the
Linux bits/socket.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/socket.h (MSG_ZEROCOPY): New enum
constant and macro.
This patch adds the new MADV_WIPEONFORK and MADV_KEEPONFORK from Linux
4.14 to bits/mman-linux.h (and bits/mman.h in the hppa case). Note
there are further hppa MADV_* changes in 4.14; I plan a separate glibc
patch for those.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/mman-linux.h
[__USE_MISC] (MADV_WIPEONFORK): New macro.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h
[__USE_MISC] (MADV_WIPEONFORK): Likewise.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
The epoll_wait wrapper uses the raw syscall if __NR_epoll_wait is defined,
and falls back to calling epoll_pwait(..., NULL) if it isn't defined.
However, it didn't include the appropriate headers for __NR_epoll_wait to
be defined, so it was *always* falling back to calling epoll_pwait!
This mistake was introduced in b62c381591,
when epoll_wait changed from being in syscalls.list to always having a C
wrapper.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
