I get some math test-failures on s390 for float/double/ldouble for
various lrint/lround functions like:
lrint (0x1p64): Exception "Inexact" set
lrint (-0x1p64): Exception "Inexact" set
lround (0x1p64): Exception "Inexact" set
lround (-0x1p64): Exception "Inexact" set
...
GCC emits "convert to fixed" instructions for casting floating point
values to integer values. These instructions raise invalid and inexact
exceptions if the floating point value exceeds the integer type ranges.
This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in
order to avoid a cast from floating point to integer type and raise the
invalid exception with feraiseexcept.
The ldbl-128 rint/round functions are now using the same logic.
ChangeLog:
[BZ #19486]
* sysdeps/s390/fix-fp-int-convert-overflow.h: New File.
* sysdeps/generic/fix-fp-int-convert-overflow.h
(FIX_LDBL_LONG_CONVERT_OVERFLOW,
FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define.
* sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise.
* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h:
Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl):
Avoid conversions to long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl):
Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl):
Avoid conversions to long long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl):
Likewise.
The previous barrier implementation did not fulfill the POSIX requirements
for when a barrier can be destroyed. Specifically, it was possible that
threads that haven't noticed yet that their round is complete still access
the barrier's memory, and that those accesses can happen after the barrier
has been legally destroyed.
The new algorithm does not have this issue, and it avoids using a lock
internally.
GLIBC benchtest testcases shows SSE2_Unaligned based implementations
are performing faster compare to SSE2 based implementations for
routines: strcmp, strcat, strncat, stpcpy, stpncpy, strcpy, strncpy
and strstr. Flag index_Fast_Unaligned_Load is set for Excavator family
0x15h CPU's. This makes SSE2_Unaligned based implementations as
default for these routines.
[BZ #19467]
* sysdeps/x86/cpu-features.c (init_cpu_features): Set
index_Fast_Unaligned_Load flag for Excavator family CPUs.
Preparation for gcc -fsplit-stack support (gcc bug #68191). The new
field is basically identical to the one on x86. Its TCB offset needs
to be constant, as it'll be hardcoded in gcc.
ChangeLog:
* sysdeps/s390/nptl/tls.h (struct tcbhead_t): Add __private_ss field.
This patch adds some new header definitions from Linux 4.4:
* MCL_ONFAULT is added to bits/mman.h / bits/mman-linux.h (this was
already done for hppa).
* PTRACE_SECCOMP_GET_FILTER is added to sys/ptrace.h. Along with it,
the older PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, added in Linux
3.11 but missed at the time, are also added.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/mman-linux.h [!MCL_CURRENT] (MCL_ONFAULT): New macro.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_GETSIGMASK): New
enum constant and macro.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
Work around a GCC behavior with hardware transactional memory built-ins.
GCC doesn't treat the PowerPC transactional built-ins as compiler
barriers, moving instructions past the transaction boundaries and
altering their atomicity.
The attached patch fixes dladdr on hppa.
Instead of using the generic version of _dl_lookup_address, we use an
implementation more or less modeled after __canonicalize_funcptr_for_compare()
in gcc. The function pointer is analyzed and if it points to the
trampoline used to call _dl_runtime_resolve just before the global
offset table, then we call _dl_fixup to resolve the function pointer.
Then, we return the instruction pointer from the first word of the
descriptor.
The change fixes the testcase provided in [BZ #19415] and the Debian
nss package now builds successfully.
We define __ASSUME_ST_INO_64_BIT by default for Linux targets, and then
undef it for alpha/sh targets. But the code that uses it looks at its
value (as 0/1) rather than whether it's defined (like all other assume
knobs). Change the code to see if it's defined to fix build Wundef build
errors for alpha/sh.
Since internal unistd functions are only used internally in ld.so and
libc.so, they can be made hidden. __close, __getcwd, __getpid,
__libc_read and __libc_write can't be hidden in ld.so on Hurd since they
will be preempted by the ones in libc.so after bootstrap.
[BZ #19122]
* include/unistd.h [IS_IN (rtld)]: Include <dl-unistd.h>.
* sysdeps/generic/dl-unistd.h: New file.
* sysdeps/mach/hurd/dl-unistd.h: Likewise.
Since ld.so internal mmap functions are only used internally in ld.so,
they can be made hidden. Don't hide __mmap on Hurd, since __mmap in
ld.so will be preempted by the one in libc.so after bootstrap.
[BZ #19122]
* include/sys/mman.h [IS_IN (rtld)]: Include <dl-mman.h>.
* sysdeps/generic/dl-mman.h: New file.
* sysdeps/mach/hurd/dl-mman.h: Likewise.
When looking at the code generated for pow() on ppc64 I noticed quite
a few sign extensions. Making the array indices unsigned reduces the
number of sign extensions from 24 to 7.
Tested for powerpc64le and x86_64.
The attached patch adds some upstream defines like MAP_HUGETLB and MAP_STACK
in mman.h for the hppa architecture.
The existing MADV_xxK_PAGES defines were dropped upstream, because they were
originally added many years ago based on a proposed patch for the Linux kernel
which was never applied. So, this patch drops those unneeded defines.
The rework in commit d709042a6e broke
buiding on ia64 due to compat_symbol expanding into ... in some cases.
The common files were wrapped in a BUILD_LGAMMA check, but the ia64
ones were not. Add that logic to the ia64 files too.
The personality system call, starting with linux kernel commit
v2.6.29-6609-g11d06b2a1e5658f448a308aa3beb97bacd64a940, always
successfully changes the personality if requested. The syscall
wrapper, however, still can return an error in the following cases:
- the value returned by the system call looks like an error
due to architecture limitations of 32-bit kernels;
- a personality greater than 0xffffffff is passed to the system call,
and the 64-bit kernel does not have commit
v2.6.35-rc1-372-g485d527686850d68a0e9006dd9904f19f122485e
that would truncate this value to unsigned int;
- on sparc64, the value returned by the system call looks like an error
due to sparc64 kernel sign extension bug.
The solution is three-fold:
- move generic syscalls.list personality entry to generic 64-bit
syscalls.list file;
- for each 32-bit architecture that use negated errno semantics,
add a NOERRNO personality entry to their syscalls.list file;
- for sparc64 and 32-bit architectures that use dedicated registers
to flag syscall errors, add a wrapper around personality syscall;
if the system call return value is flagged as an error, this wrapper
returns the negated "would be errno" value, otherwise it returns
the system call return value; on sparc64, it also truncates the
personality argument to unsigned int before passing it to the kernel.
[BZ #19408]
* sysdeps/unix/sysv/linux/personality.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/personality.c: Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == misc]
(sysdep_routines): Add personality.
(tests): Add tst-personality.
* sysdeps/unix/sysv/linux/syscalls.list (personality): Move ...
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: ... here.
* sysdeps/unix/sysv/linux/arm/syscalls.list (personality): New entry.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (personality):
Likewise.
Since GLIBC requires a minimum 2.6.32 kernel, the sysctl (CTL_BUS,
CTL_BUS_ISA, ISA_*) is always available. We can therefore remove the
fallback code reading /etc/arm_systype or parsing /proc/cpuinfo.
Remove fscanf from localplt.data as it is no longer called from within
GLIBC.
* sysdeps/unix/sysv/linux/arm/ioperm.c: Do not include <string.h>.
(PATH_ARM_SYSTYPE): Remove.
(PATH_CPUINFO): Likewise.
(IO_BASE_FOOTBRIDGE): Likewise.
(IO_SHIFT_FOOTBRIDGE): Likewise.
(struct platform): Likewise.
(init_iosys): Remove compatibility code for 2.4 kernels.
* sysdeps/unix/sysv/linux/arm/localplt.data: Remove fscanf.
The attached patch fixes BZ #19270 and the Debian gmt package now builds
successfully. Aside from the comment, the define of __NO_LONG_DOUBLE_MATH
is similar to that in the generic version of glibc.
Build tested on hppa-unknown-linux-gnu with no observed regressions.
POSIX and C++11 require that a thread can destroy a mutex if no other
thread owns the mutex, is blocked on the mutex, or will try to acquire
it in the future. After destroying the mutex, it can reuse or unmap the
underlying memory. Thus, we must not access a mutex' memory after
releasing it. Currently, we can load the private flag after releasing
the mutex, which is fixed by this patch.
See https://sourceware.org/bugzilla/show_bug.cgi?id=13690 for more
background.
We need to call futex_wake on the lock after releasing it, however. This
is by design, and can lead to spurious wake-ups on unrelated futex words
(e.g., when the mutex memory is reused for another mutex). This behavior
is documented in the glibc-internal futex API and in recent drafts of the
Linux kernel's futex documentation (see the draft_futex branch of
git://git.kernel.org/pub/scm/docs/man-pages/man-pages.git).
Commit 67385a01d2 added a new feature for
powerpc, where we store HWCAP/Platform bits in the TCB. In the dynamic
linking case, we use the versioned symbol
'__parse_hwcap_and_convert_at_platform' to verify if this feature is
available. However, the same symbol was not exported to libc.a, making
it not possible for GCC to check for it prior to link time.
This fixes build when _IO_funlockfile is a macro, fixes build where
_IO_acquire_lock_clear_flags2 is used, and fixes unlocking on unexpected
stack unwind.
* sysdeps/generic/stdio-lock.h [__EXCEPTIONS] (_IO_acquire_lock,
_IO_release_lock ): Use cleanup attribute on new
_IO_acquire_lock_file variable instead of assuming that
_IO_release_lock will be called.
[!__EXCEPTIONS] (_IO_acquire_lock): Define to non-existing
_IO_acquire_lock_needs_exceptions_enabled.
(_IO_acquire_lock_clear_flags2): New macro.
Like the previous change, exploit the fact that computation for sin
and cos is identical except that it is apart by a quadrant. Also
remove csloww, csloww1 and csloww2 since they can easily be expressed
in terms of sloww, sloww1 and sloww2.
The sin and cos computation for this range of input is identical
except for a difference in quadrants by 1. Exploit that fact and the
common argument reduction to reduce computations for sincos.
Range reduction needs to be done only once for sin and cos, so copy
over all of the relevant functions (__sin, __cos, reduce_and_compute)
and consolidate common code.
The i386 ULPs are actually the i686/multiarch ones. The i686/multiarch
float ULPs are more precise as the SSE2 version (when available) uses
double for the cosf and sinf functions.
On the other hand the higher precision of the x86 FPU improves the
precision for a few other math functions.
* sysdeps/i386/fpu/libm-test-ulps: Move to ....
* sysdeps/i386/i686/multiarch/fpu/libm-test-ulps: ...here.
* sysdeps/i386/fpu/libm-test-ulps: Regenerate.
It shows improvement up to 28% over AVX2 memset (performance results
attached at <https://sourceware.org/ml/libc-alpha/2015-12/msg00052.html>).
* sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S: New file.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Added new file.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c: Added new tests.
* sysdeps/x86_64/multiarch/memset.S: Added new IFUNC branch.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86/cpu-features.h (bit_Prefer_No_VZEROUPPER,
index_Prefer_No_VZEROUPPER): New.
* sysdeps/x86/cpu-features.c (init_cpu_features): Set the
Prefer_No_VZEROUPPER for Knights Landing.
This patch fixes the SYSCALL_CANCEL macro for usage with zero argument
number (for instance SYSCALL_CANCEL (pause)) using a similar approach
used for SOCKETCALL_CANCEL.
GLIBC build still does not hit this issue still since SYSCALL_CANCEL
is not currently being used for zero arguments calls.
Tested on i386, x86_64, powerpc64le, aarch64.
* sysdeps/unix/sysdep.h (SYSCALL_CANCEL): Fix macro for zero argument
syscalls.
(__SYSCALL0): New macro.
(__SYSCALL1): Likewise.
(__SYSCALL2): Likewise.
(__SYSCALL3): Likewise.
(__SYSCALL4): Likewise.
(__SYSCALL5): Likewise.
(__SYSCALL6): Likewise.
(__SYSCALL7): Likewise.
(__SYSCALL_CONCAT_X): Likewise.
(__SYSCALL_CONCAT): Likewise.
(__SYSCALL_DIST): Likewise.
(__SYSCALL_CALL): Likewise.
Since times returns 64-bit clock_t on x32, we need to provide x32 times
by redefining INTERNAL_SYSCALL_NCS and INTERNAL_SYSCALL_ERROR_P with
64-bit return type for syscall. All system calls returning 64-bit
integer, which are lseek, time and times, must be handled specially for
x32. lseek is handled by x32 lseek.S and time doesn't check syscall
return. times is the only missed one. Before this patch, there are
0000000 <__times>:
0: b8 64 00 00 40 mov $0x40000064,%eax
5: 0f 05 syscall
7: 48 63 d0 movslq %eax,%rdx
^^^^^^^^^^ Incorrect signed extension
a: 48 83 fa f2 cmp $0xfffffffffffffff2,%rdx
e: 75 07 jne 17 <__times+0x17>
10: 3d 00 f0 ff ff cmp $0xfffff000,%eax
^^^^^^^^^^^^^^^^^^^^^ 32-bit compare
15: 77 11 ja 28 <__times+0x28>
17: 48 83 fa ff cmp $0xffffffffffffffff,%rdx
1b: b8 00 00 00 00 mov $0x0,%eax
20: 48 0f 45 c2 cmovne %rdx,%rax
24: c3 retq
After this patch, there are
00000000 <__times>:
0: b8 64 00 00 40 mov $0x40000064,%eax
5: 0f 05 syscall
7: 48 83 f8 f2 cmp $0xfffffffffffffff2,%rax
b: 75 08 jne 15 <__times+0x15>
d: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
13: 77 13 ja 28 <__times+0x28>
15: 48 83 f8 ff cmp $0xffffffffffffffff,%rax
19: ba 00 00 00 00 mov $0x0,%edx
1e: 48 0f 44 c2 cmove %rdx,%rax
22: c3 retq
The incorrect signed extension and 32-bit compare are gone.
[BZ #19363]
* sysdeps/unix/sysv/linux/x86_64/x32/times.c: New file.
The optimized POWER7 logb implementation does not use the absolute
value of the word extracted from the input to apply the leading 0-bits
builtin (to ignore the float sign). This patch fixes it by
clearing the signal bit in the resulting word.
It fixes the subnormal tests failures when running on POWER7 ou
newer chip.
Tested on powerpc64le (POWER8).
[BZ# 19375]
* sysdeps/powerpc/power7/fpu/s_logb.c (__logb): Fix return for
negative subnormals.
X86-64 system calls use a different calling convention, which clobbers
CC, %r11 an %rcx registers. Define REGISTERS_CLOBBERED_BY_SYSCALL for
x86-64 inline asm statements.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(REGISTERS_CLOBBERED_BY_SYSCALL): New.
(INTERNAL_SYSCALL_NCS): Use it.
(INTERNAL_SYSCALL_NCS_TYPES): Likewise.
According to Silvermont software optimization guide, for 64-bit
applications, branch prediction performance can be negatively impacted
when the target of a branch is more than 4GB away from the branch. Add
the Prefer_MAP_32BIT_EXEC bit so that mmap will try to map executable
pages with MAP_32BIT first. NB: MAP_32BIT will map to lower 2GB, not
lower 4GB, address. Prefer_MAP_32BIT_EXEC reduces bits available for
address space layout randomization (ASLR), which is always disabled for
SUID programs and can only be enabled by setting environment variable,
LD_PREFER_MAP_32BIT_EXEC.
On Fedora 23, this patch speeds up GCC 5 testsuite by 3% on Silvermont.
[BZ #19367]
* sysdeps/unix/sysv/linux/wordsize-64/mmap.c: New file.
* sysdeps/unix/sysv/linux/x86_64/64/dl-librecon.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise.
* sysdeps/x86/cpu-features.h (bit_Prefer_MAP_32BIT_EXEC): New.
(index_Prefer_MAP_32BIT_EXEC): Likewise.
Knights Landing processor is based on Silvermont. This patch enables
Silvermont optimizations for Knights Landing.
* sysdeps/x86/cpu-features.c (init_cpu_features): Enable
Silvermont optimizations for Knights Landing.
Various Linux kernel syscalls have become obsolete over time.
Specifically, the following are obsolete in all kernel versions
supported by glibc, are not present for architectures more recently
added to the kernel, and as such, the wrapper functions for them
should be compat symbols, not in static libc and not available for new
links with shared libc.
* bdflush: in Linux 2.6, does nothing if present.
* create_module get_kernel_syms query_module: Linux 2.4 module
interface, syscalls not present in Linux 2.6.
* uselib: part of the mechanism for loading a.out shared libraries,
irrelevant with ELF.
This patch adds support for syscalls.list to list syscall aliases of
the form NAME@VERSION:OBSOLETED, with SHLIB_COMPAT conditionals being
generated for such aliases. Those five syscalls are then made into
compat symbols (obsoleted in glibc 2.23, so future ports won't have
these symbols at all), with the header <sys/kdaemon.h> declaring
bdflush being removed. When we move to 3.2 as minimum kernel version,
the same can be done for nfsservctl (removed in Linux 3.1) as well.
Tested for x86_64 and x86 (testsuite, as well as checking that the
symbols in question indeed become compat symbols, that they are indeed
omitted from static libc, and that the generated SHLIB_COMPAT
conditionals look right).
[BZ #18472]
* sysdeps/unix/Makefile ($(objpfx)stub-syscalls.c): Handle entries
for the form NAME@VERSION:OBSOLETED and generate SHLIB_COMPAT
conditionals for them.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Likewise.
* sysdeps/unix/sysv/linux/sys/kdaemon.h: Remove file.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove
sys/kdaemon.h.
* sysdeps/unix/sysv/linux/syscalls.list (bdflush): Make into
compat-only syscall, obsoleted in glibc 2.23.
(create_module): Likewise.
(get_kernel_syms): Likewise.
(query_module): Likewise.
(uselib): Likewise.
* manual/sysinfo.texi (System Parameters): Do not mention bdflush.
According to POSIX the grantpt() function does the following:
The grantpt() function shall change the mode and ownership of the
slave pseudo-terminal device associated with its master
pseudo-terminal counterpart. The fildes argument is a file descriptor
that refers to a master pseudo-terminal device. The user ID of the
slave shall be set to the real UID of the calling process and the
group ID shall be set to an unspecified group ID. The permission
mode of the slave pseudo-terminal shall be set to readable and
writable by the owner, and writable by the group.
Historically the GNU libc has been responsible to setup the permission
mode to 0620 and the group to 'tty' usually number 5, using the pt_chown
helper, badly known for its security issues. With the creation of the
devpts filesytem in the Linux kernel, this responsibility has been moved
to the Linux kernel. The system is responsible to mount the devpts
filesystem in /dev/pts with the options gid=5 and mode=0620. In that
case the GNU libc has nothing to do and pt_chown is not need anymore. So
far so good.
The problem is that by default the devpts filesystem is shared between
all mounts, and that contrary to other filesystem, the mount options are
honored at the second mount, including for the default mount options.
Given it corresponds to mode=0600 without gid parameter (that is the
filesystem GID of the creating process), it's common to see systems
where the devpts filesystem is mounted using these options. It is enough
to run a "mount -t devpts devpts /mychroot/dev/pts" to come into this
situation, and it's unfortunately wrongly used in a lot of scripts
dealing with chroots, or for creating virtual machines images.
When this happens the GNU libc tries to fix the group and permission
mode of the pty nodes, and given it fails to do so for non-root users,
grantpt() almost always fail. It means users are not able to open new
terminals.
This patch changes grantpt() to not enforce this anymore, while still
enforcing minimum security measures to the permission mode. Therefore
the responsibility to follow POSIX is now shared at the system level,
i.e. kernel + system scripts + GNU libc. It stops trying to change the
group, and makes the pty node readable and writable by the owner, and
writable by the group only when originally writable and when the group
is the tty one.
As a result, on a system wrongly mounted with gid=0 and mode=0600, the
pty nodes won't be accessible by the tty group, but the grantpt()
function will succeed and users will have a working system. The system
is not fully POSIX compliant (which might be an admin choice to default
to "mesg n" mode), but the GNU libc is not to blame here, as without the
pt_chown helper it can't do anything.
With this patch there should not be any reason left to build the GNU
libc with the --enable-pt_chown configure option on a GNU/Linux system.
The ldbl-128ibm implementation of logl is inaccurate for arguments
near 1, because when deciding whether to bypass a series expansion for
log(1+z), where z = x-1, it compares the square of z rather than z
itself with an epsilon value. This patch fixes that comparison, so
eliminating the test failures for inaccuracy of logl in such cases.
Tested for powerpc.
[BZ #19351]
* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): When
expanding log(1+z), compare z rather than its square with epsilon
to determine when to avoid evaluating the expansion.
The ldbl-128ibm implementation of sinhl uses a slightly too small
overflow threshold (similar to bug 16407 for coshl). This patch fixes
it to use a safe threshold (so that values whose high part is above
the value compared with definitely result in an overflow in all
rounding modes).
Tested for powerpc.
[BZ #19350]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl):
Increase overflow threshold.
The ldbl-128ibm implementation of tanhl is inaccurate for small
arguments, because it returns x*(1+x) (maybe in an attempt to raise
"inexact") when x itself would be the accurate return value but
multiplying by 1+x introduces large errors. This patch fixes it to
return x in that case (when the mathematical result is x plus a
negligible remainder on the order of x^3) to avoid those errors.
Tested for powerpc.
[BZ #19349]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Return argument
when small.
Now that we have __ASSUME_* macros for direct socket syscalls to use
them instead of socketcall when they can be assumed to be available on
socketcall architectures, this patch defines those macros when
appropriate for i386, m68k, microblaze and sh (for 4.3, 4.3, all
supported kernels and 2.6.37, respectively; the only use of socketcall
support on microblaze is it allows accept4 and sendmmsg to be
supported on a wider range of kernel versions).
David, it seems that 32-bit SPARC is the only architecture supported
by glibc that still lacks these direct syscalls. It would be good to
get them added to the SPARC kernel so we can eventually eliminate
socketcall support in glibc (and thereby just use entries in
sysdeps/unix/syscalls.list for most of these functions) when we can
assume new-enough kernels.
Tested for i386 (testsuite, and that installed shared libraries are
unchanged by this patch - not using a new enough kernel, so this
doesn't actually test much, but the i386 and m68k code is essentially
the same as that already in use for s390).
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
New macro.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKET_SYSCALL): Likewise.
(__ASSUME_BIND_SYSCALL): Likewise.
(__ASSUME_CONNECT_SYSCALL): Likewise.
(__ASSUME_LISTEN_SYSCALL): Likewise.
(__ASSUME_ACCEPT_SYSCALL): Likewise.
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
(__ASSUME_SEND_SYSCALL): Likewise.
(__ASSUME_SENDTO_SYSCALL): Likewise.
(__ASSUME_RECV_SYSCALL): Likewise.
(__ASSUME_RECVFROM_SYSCALL): Likewise.
(__ASSUME_SHUTDOWN_SYSCALL): Likewise.
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SENDMSG_SYSCALL): Likewise.
(__ASSUME_RECVMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_ACCEPT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SEND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECV_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
On MIPS when the toolchain is using the O32 FPXX ABI, the testsuite
fails to build for pre-R2 CPU.
It assumes that it is possible to use the -mfp64 option to build
tst-abi-fp64amod and tst-abi-fp64mod, while this requires a CPU which
supports the mfhc1 and mthc1 instructions, ie at least a R2 CPU:
error: '-mgp32' and '-mfp64' can only be combined if the target
supports the mfhc1 and mthc1 instructions
The same way it assumes that it is possible to use the -modd-spreg option
to build tst-abi-fpxxomod and tst-abi-fp64mod, while this requires at
least a R1 CPU:
warning: the 'mips2' architecture does not support odd
single-precision registers
This patches changes that by checking the usability of -mfp64 and
-modd-spreg options in configure, and disable those tests when they can
not be used.
Commit cf06a4e3 removed test-xfail-POSIX2008/unistd.h/linknamespace, but
left one basename namespace issue in grantpt. However this issue is not
visible with the default configuration buy only when configure is passed
the --enable-pt_chown option.
This patch allows to use x86_64 vector math functions with GCC 6.*
without OpenMP SIMD constructs. For additional details please visit
<https://sourceware.org/glibc/wiki/libmvec#Example_2>.
* sysdeps/x86/fpu/bits/math-vector.h: W/o -fopenmp declare vector math
functions with GCC 6.* __attribute__ ((__simd__)).
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.
To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors. However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.
For tile, remove the now-unnecessary exports of those functions from
libc and libm.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
Since x86-64 and x32 use the same set of sched_XXX system call interface:
[hjl@gnu-6 linux-stable]$ grep sched_
arch/x86/entry/syscalls/syscall_64.tbl
24 common sched_yield sys_sched_yield
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
[hjl@gnu-6 linux-stable]$
__cpu_mask should be unsigned long long, instead of unsigned long, for
x32. This patch adds __CPU_MASK_TYPE so that each architecture can
define the proper type for __cpu_mask.
[BZ #19313]
* bits/typesizes.h (__CPU_MASK_TYPE): New.
* sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE):
* sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace
unsigned long int with __CPU_MASK_TYPE.
Various sysdeps/ieee754/dbl-64 functions use double constants defined
using a union between a double and two ints, with separate big-endian
and little-endian definitions of the constants.
With modern C, this is unnecessary complication; hex float constants
(or __builtin_inf etc.) suffice to specify the exact value desired,
and so can avoid separate versions for each endianness. Having this
complication also complicates cleanups such as removing slow paths
from these library functions, as they need to make sure to remove both
copies of variables that are no longer used after such a cleanup (and
in at least one case, proper removal of a slow path will also involve
removing slow-path-only values from the middle of an array - an array
with both big-endian and little-endian copies - and adjusting other
references to that array).
So it makes sense to clean up the code to define these constants using
hex floats and so eliminate the endianness conditional. This patch
does so in the case of sqrt, where the two constants are such that it
makes sense just to put them directly in the code using them and
eliminate the names for them altogether.
Tested for arm (the code generated for sqrt does change, though not in
any significant way).
* sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h.
(__ieee754_sqrt): Use hex float constants instead of tm256.x and
t512.x.
* sysdeps/ieee754/dbl-64/uroot.h: Remove file.
AMD CPUs uses the similar encoding scheme for extended family and model
as Intel CPUs as shown in:
http://support.amd.com/TechDocs/25481.pdf
This patch updates get_common_indeces to get family and model for both
Intel and AMD CPUs when family == 0x0f.
[BZ #19214]
* sysdeps/x86/cpu-features.c (get_common_indeces): Add an
argument to return extended model. Update family and model
with extended family and model when family == 0x0f.
(init_cpu_features): Updated.
The RPC interface used by mmap uses the unsigned vm_offset_t, not the
signed off_t, so 32bit bigger than 2GiB values are fine actually.
* sysdeps/mach/hurd/mmap64.c: New file.
Revision 3.50 of the MIPS architecture defined FCSR ABS2008 and NAN2008
bits as optionally read/write [1][2]. No hardware implementation has
ever made use of this feature though. For example the first processor
to implement these bits, the MIPS32r3 proAptiv core, has both bits
read-only, hardwired to 1 [3]. And as from revision 5.03 of the MIPS
architecture the bits are required to be read-only, preset by hardware
[4][5]. Additionally all hardware implementations in existence have the
bits hardwired both to the same value, either of `0' and `1'.
These bits may still be read/write or hardwired to opposite values in
simulated hardware implementations such as QEMU or the FPU emulator
included with the Linux kernel. However to match real hardware
implementations the Linux kernel will set FCSR ABS2008 and NAN2008 bits
both to the same value where possible, reflecting the setting of the
EF_MIPS_NAN2008 ELF file header bit.
Therefore update the bit patterns in macro definitions we use for the
control word, in the 2008-NaN encoding mode, so that both bits have the
same value in a given bit pattern. Additionally mark the FCSR ABS2008
bit as reserved, so that high-level calls to change the control word do
not affect the bit.
This covers the regular FPU configurations, only leaving exotic corner
cases with the value of FCSR control word initially set by the kernel
different to what our code thinks it is. To address the remaining cases
the AT_FPUCW auxiliary vector entry would have to be implemented in the
Linux kernel, which currently is not.
References:
[1] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 80
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 82
[3] "MIPS32 proAptiv Multiprocessing System Software User's Manual",
MIPS Technologies, Inc., Document Number: MD00878, Revision 01.22,
May 14, 2013, Table 12.10 "FCSR Bit Field Descriptions", p. 570
[4] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 82
[5] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 84
* sysdeps/mips/fpu_control.h (_FPU_RESERVED): Include ABS2008.
(_FPU_DEFAULT, _FPU_IEEE) [__mips_nan2008]: Set ABS2008.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.
This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.
The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all. This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE). This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).
This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales. Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.
Tested for x86_64, x86, mips64 and powerpc.
* stdlib/strtod_nan.c: New file.
* stdlib/strtod_nan_double.h: Likewise.
* stdlib/strtod_nan_float.h: Likewise.
* stdlib/strtod_nan_main.c: Likewise.
* stdlib/strtod_nan_narrow.h: Likewise.
* stdlib/strtod_nan_wide.h: Likewise.
* stdlib/strtof_nan.c: Likewise.
* stdlib/strtold_nan.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
* wcsmbs/wcstod_nan.c: Likewise.
* wcsmbs/wcstof_nan.c: Likewise.
* wcsmbs/wcstold_nan.c: Likewise.
* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
strtold_nan.
* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
wcstof_nan.
* include/stdlib.h (__strtof_nan): Declare and use
libc_hidden_proto.
(__strtod_nan): Likewise.
(__strtold_nan): Likewise.
(__wcstof_nan): Likewise.
(__wcstod_nan): Likewise.
(__wcstold_nan): Likewise.
* include/wchar.h (____wcstoull_l_internal): Declare.
* stdlib/strtod_l.c: Do not include <ieee754.h>.
(____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
(STRTOULL): Likewise.
(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
This avoids build failures in the tests, and matches what is in
bits/mathdef.h.
Update the libc and libm abilist files to include __finitel,
__isinfl, and __isnanl.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
In the course of reviewing Linux 4.3 changes for any glibc header
updates needed, I found that
sysdeps/unix/sysv/linux/netpacket/packet.h was extremely out of date
(last updated for Linux 2.3.15, it seems). This patch updates the
sets of constants present in that header to include those added to
those sets in newer kernels (include/uapi/linux/if_packet.h).
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/netpacket/packet.h (PACKET_COPY_THRESH):
New macro.
(PACKET_AUXDATA): Likewise.
(PACKET_ORIGDEV): Likewise.
(PACKET_VERSION): Likewise.
(PACKET_HDRLEN): Likewise.
(PACKET_RESERVE): Likewise.
(PACKET_TX_RING): Likewise.
(PACKET_LOSS): Likewise.
(PACKET_VNET_HDR): Likewise.
(PACKET_TX_TIMESTAMP): Likewise.
(PACKET_TIMESTAMP): Likewise.
(PACKET_FANOUT): Likewise.
(PACKET_TX_HAS_OFF): Likewise.
(PACKET_QDISC_BYPASS): Likewise.
(PACKET_ROLLOVER_STATS): Likewise.
(PACKET_FANOUT_DATA): Likewise.
(PACKET_MR_UNICAST): Likewise.
Various math_private.h headers are guarded by "#ifndef
_MATH_PRIVATE_H", but never define the macro. Nothing else defines
the macro either (the generic math_private.h that they include defines
a different macro, _MATH_PRIVATE_H_), so those guards are ineffective.
With the recent inclusion of s_sin.c in s_sincos.c, this breaks the
build for MIPS, since the build of s_sincos.c ends up including
<math_private.h> twice and the MIPS version defines inline functions
such as libc_feholdexcept_mips, without a separate fenv_private.h
header with its own guards such as some architectures have.
This patch fixes all the problem headers to use architecture-specific
guard macro names, and to define those macros in the headers they
guard, just as some architectures already do.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch), and for mips64 (that it fixes the build).
* sysdeps/arm/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!ARM_MATH_PRIVATE_H].
[!ARM_MATH_PRIVATE_H] (ARM_MATH_PRIVATE_H): Define macro.
* sysdeps/hppa/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!HPPA_MATH_PRIVATE_H].
[!HPPA_MATH_PRIVATE_H] (HPPA_MATH_PRIVATE_H): Define macro.
* sysdeps/i386/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard
to [!I386_MATH_PRIVATE_H].
[!I386_MATH_PRIVATE_H] (I386_MATH_PRIVATE_H): Define macro.
* sysdeps/m68k/m680x0/fpu/math_private.h [!_MATH_PRIVATE_H]:
Change guard to [!M68K_MATH_PRIVATE_H].
[!M68K_MATH_PRIVATE_H] (M68K_MATH_PRIVATE_H): Define macro.
* sysdeps/microblaze/math_private.h [!_MATH_PRIVATE_H]: Change
guard to [!MICROBLAZE_MATH_PRIVATE_H].
[!MICROBLAZE_MATH_PRIVATE_H] (MICROBLAZE_MATH_PRIVATE_H): Define
macro.
* sysdeps/mips/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!MIPS_MATH_PRIVATE_H].
[!MIPS_MATH_PRIVATE_H] (MIPS_MATH_PRIVATE_H): Define macro.
* sysdeps/nios2/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!NIO2_MATH_PRIVATE_H].
[!NIO2_MATH_PRIVATE_H] (NIO2_MATH_PRIVATE_H): Define macro.
* sysdeps/tile/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!TILE_MATH_PRIVATE_H].
[!TILE_MATH_PRIVATE_H] (TILE_MATH_PRIVATE_H): Define macro.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Linux 2.6.32 and forward do not show the issue regarding SysV SIGCHLD
vs. SIG_IGN for nanosleep which make it feasible to use it for sleep
implementation without requiring any hacking to handle the spurious
wake up. The issue is likely being fixed before 2.6 and git
history [1] [2].
This patch simplifies the sleep code to call nanosleep directly by
using the posix default version. It also removes the early cancellation
tests for zero argument, since nanosleep will handle cancellation
in this case.
[1] https://lkml.org/lkml/2004/11/25/5
[2] https://lkml.org/lkml/2003/11/8/50
Checked on x86_64, ppc64le, and aarch64.
[BZ #16364]
* sysdeps/unix/sysv/linux/sleep.c: Remove file
* sysdeps/posix/sleep.c (__sleep): Simplify cancellation handling.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
__lll_trylock_elision sets the adapt_count variable too
aggressively, and incorrectly on persistent aborts. Taking
a cue from s390, adapt_count is only updated if the lock
is locked, or a persistent failure occurs.
In addition, the abort codes have been renumbered and
refactored for clarity. As it stands, glibc only cares
if the abort is persistent or not.
All aborts are now persistent, excepting a busy lock. This
includes changing _ABORT_NESTED_TRYLOCK into a persistent
abort.
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Fix setting of adapt_count.
* sysdeps/unix/sysv/linux/powerpc/htm.h
(_ABORT_PERSISTENT): Define to clarify persistent aborts.
(_ABORT_NESTED_TRYLOCK): Renumber, and make persistent.
(_ABORT_SYSCALL): Renumber, and clarify definition.
(_ABORT_LOCK_BUSY): Renumber, make non-persistent.
Kind of hokey, but errno.h drags in misc/sys/param.h which
defines MIN/MAX causing an error. Include system headers
first to grab MIN/MAX definition in param.h, and define
HAVE_ALLOCA to preserve existing behavior.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldl.c: Include gmp headers
after system headers to prevent MIN/MAX redefinition. Define
HAVE_ALLOCA to preserve builtin alloca usage.
Include the __sin and __cos functions as local static copies to allow
deper optimization of the functions. This change shows an improvement
of about 17% in the min case and 12.5% in the mean case for the sincos
microbenchmark on x86_64.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function
static and don't set or restore rounding.
(__cos)[IN_SINCOS]: Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c.
(__sincos): Set and restore rounding mode. Remove check for infinite
or NaN input.
For ldbl-128ibm, if the result of strtold overflows in the final
conversion from MPN to IBM long double (because the exponent for a
106-bit IEEE result is 1023 but the high part would end up as
0x1p1024, which overflows), that conversion code fails to handle this
and produces an invalid long double value (high part infinite, low
part not zero) without raising exceptions or setting errno. This
patch adds an explicit check for this case to ensure an appropriate
result is returned in a way that ensures the right exceptions are
raised, with errno set.
Tested for powerpc.
[BZ #14551]
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: Include <errno.h>.
(__mpn_construct_long_double): If high part overflows to infinity,
set errno and recompute overflowed result of the correct sign.
* sysdeps/ieee754/ldbl-128ibm/Makefile
[$(subdir) = stdlib] (tests): Add tst-strtold-ldbl-128ibm.
[$(subdir) = stdlib] ($(objpfx)tst-strtold-ldbl-128ibm): Depend on
$(libm).
* sysdeps/ieee754/ldbl-128ibm/tst-strtold-ldbl-128ibm.c: New file.
The powerpc hard-float round and roundf functions, both 32-bit and
64-bit, raise spurious "inexact" exceptions for integer arguments from
adding 0.5 and rounding to integer toward zero.
Since these functions already save and restore the rounding mode, it's
natural to make them restore the full floating-point state instead to
fix this bug, which this patch does. The save of the state is moved
after the first floating-point operation on the input so that any
"invalid" exceptions from signaling NaN inputs are properly
preserved. As a consequence of this approach to the fix, "inexact"
for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11,
see bug 15479) is also avoided for these implementations; this is
*not* a general fix for bug 15479 since plenty of other
implementations of various functions still raise spurious "inexact"
for noninteger arguments.
This issue and fix do not apply to builds using power5+ versions of
round and roundf, which use the frin instruction and avoid "inexact"
exceptions that way.
This patch should get hard-float powerpc32 and powerpc64 (default
function implementations) back to a state where test-float and
test-double will pass after ulps regeneration.
Tested for powerpc32 and powerpc64.
[BZ #15479]
[BZ #19238]
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save
floating-point state after first operation on input. Restore full
state rather than just rounding mode.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
Similar to bug 19134 for powerpc32, the powerpc64 implementations of
lround, lroundf, llround, llroundf can raise spurious "inexact"
exceptions for integer arguments from adding 0.5 then converting to
integer (this does not apply to the power5+ version for double, which
uses the frin instruction which is defined never to raise "inexact"; I
don't know why power5+ doesn't use that version for float as well).
This patch fixes the bug in a similar way to the powerpc32 bug, by
testing for integers (adding and subtracting 2^52 and comparing with
the value before that addition and subtraction) and not adding 0.5 in
that case.
The powerpc maintainers may wish to look at making power5+ / power6x /
power8 use frin for float lround / llround as well as for double,
unless there's some reason I've missed that this isn't beneficial.
Tested for powerpc64.
[BZ #19235]
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Do not
add 0.5 to integer arguments.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf):
Likewise.
(.LC2): New object.
Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc
(both powerpc32 and powerpc64) hard-float implementations of
nearbyintf and nearbyint wrongly clear an "inexact" exception that was
raised before the function was called; this shows up as failure of the
test math/test-nearbyint-except added when that bug was fixed. They
also wrongly leave traps on "inexact" disabled if they were enabled
before the function was called.
This patch fixes the bugs similar to how the x86 bug was fixed: saving
and restoring the whole floating-point state, both to restore the
original "inexact" flag state and to restore the original state of
whether traps on "inexact" were enabled. Because there's a convenient
point in the powerpc implementations to save state after any sNaN
arguments will have raised "invalid" but before "inexact" traps need
to be disabled, no special handling for "invalid" is needed as in the
x86 version.
Tested for powerpc64 and powerpc32, where it fixes the
math/test-nearbyint-except failure as well as fixing the new test
math/test-nearbyint-except-2 added by this patch. Also tested for
x86_64 and x86 that the new test passes.
If powerpc experts see a more efficient way of doing this
(e.g. instruction positioning that's better for pipelines on typical
processors) then of course followups optimizing the fix are welcome.
[BZ #19228]
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save
and restore full floating-point state.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* math/test-nearbyint-except-2.c: New file.
* math/Makefile (tests): Add test-nearbyint-except-2.
This test applies to i386 and x86_64 which set R_386_GLOB_DAT and
R_X86_64_GLOB_DAT to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA.
[BZ #19178]
* sysdeps/x86/Makefile (tests): Add tst-prelink.
(tst-prelink-ENV): New.
($(objpfx)tst-prelink-conflict.out): Likewise.
($(objpfx)tst-prelink-cmp.out): Likewise.
(tests-special): Add $(objpfx)tst-prelink-cmp.out.
* sysdeps/x86/tst-prelink.c: New file.
* sysdeps/x86/tst-prelink.exp: Likewise.
GLIBC fails to build for ia64 since commit d0d286d32d.
It is because this commit uses the internal definition for nearbyintl,
but ia64 specialized implementation (sysdeps/ia64/fpu/s_nearbyintl.S)
does not define it.
Tested with a ia64 build.
[BZ #19219]
* sysdeps/ia64/fpu/s_nearbyintl.S (__nearbyint): Define and
weak_alias to nearbyintl.
* elf/dl-load.c (_dl_map_object_from_fd): Add additional parameter
for original name of the DSO. Add it to the name list of the DSO
if it is actually given.
(_dl_map_object): Keep track of whether an audit module rewrote
the file name. If yes, pass the original name to
_dl_map_object_from_fd in a new parameter, otherwise NULL. When
debugging is enabled, log the change of the file name.
* sysdeps/mach/hur/dl-sysdep.c: Adjust commented-out call to
_dl_map_object_from_fd.
* elf/Makefile: Build and run tst-audit11 and tst-audit12.
* elf/tst-audit11.c: New file
* elf/tst-auditmod11.c: New file.
* elf/tst-audit11mod1.c: New file.
* elf/tst-audit11mod2.c: New file.
* elf/tst-audit11mod2.map: New file.
* elf/tst-audit12.c: New file
* elf/tst-auditmod12.c: New file.
* elf/tst-audit12mod1.c: New file.
* elf/tst-audit12mod2.c: New file.
* elf/tst-audit12mod2.map: New file.
* elf/tst-audit12mod3.c: New file.
For each function setjmp, longjmp, getcontext, there exist a symbol
<func> and a default/versioned symbol <func>@@GLIBC_2.x in the build
obj-files.
This is wrong because it should only exist an unversioned or a
default-versioned symbol with the same name in an obj-file.
Glibc can't be build with recent binutils. See the already fixed linker
bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073.
Nevertheless, this patch cleans this up.
Furthermore the BSD entry points setjmp, _setjmp were marked as weak,
but should be strong as on other architectures.
(see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an
older discussion with Andreas Schwab)
Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S,
too. But there is no change in the assembler code.
ChangeLog:
* sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp):
Don't create weak aliases,
because versioned symbols are created later.
* sysdeps/s390/s390-32/setjmp.S
(setjmp, _setjmp): Remove weak and rename to an unique name
in SHARED case due to existing versioned symbols.
* sysdeps/s390/s390-64/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S
(getcontext): Create weak alias only in non SHARED case.
* sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
