mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-26 20:51:11 +00:00
8d2d239cb7
304 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joseph Myers
|
6f7c009282 |
Add sysdeps/ieee754/soft-fp.
The default sysdeps/ieee754 fma implementations rely on exceptions and rounding modes to achieve correct results through internal use of round-to-odd. Thus, glibc configurations without support for exceptions and rounding modes instead need to use implementations of fma based on soft-fp. At present, this is achieved via having implementation files in soft-fp/ that are #included by sysdeps files for each glibc configuration that needs them. In general this means such a configuration has its own s_fma.c and s_fmaf.c. TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on arguments wider than the return type, with a single rounding of the infinite-precision result to that return type. These are also naturally implemented using round-to-odd on platforms with hardware support for rounding modes and exceptions but lacking hardware support for these narrowing operations themselves. (Platforms that have direct hardware support for such narrowing operations include at least ia64, and Power ISA 2.07 or later, which I think means POWER8 or later.) So adding the remaining TS 18661-1 functions would mean at least six narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt), with aliases for other types and further implementations in some configurations, that need to be overridden for configurations lacking hardware exceptions and rounding modes. Requiring all such configurations (currently seven of them) to have their own source files for all those functions seems undesirable. Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain libm function implementations based on soft-fp. This directory is then used via Implies from all the configurations that need it, so no more files need adding to every such configuration when adding more functions with soft-fp implementations. A configuration can still selectively #include a particular file from this directory if desired; thus, the MIPS #include of the fmal implementation is retained, since that's appropriate even for hard float (because long double is always implementated in software for MIPS64, so the soft-fp implementation of fmal is better than the ldbl-128 one). This also provides additional motivation for my recent patch removing --with-fp / --without-fp: previously there was no need for correct use of --without-fp for no-FPU ARM or SH3, and now we have autodetection nofpu/ sysdeps directories can be used by this patch for those configurations without imposing any new requirements on how glibc is configured. (The mips64/*/fpu/s_fma.c files added by this patch are needed to keep the dbl-64 version of fma for double, rather than the ldbl-128 one, used in that case.) Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * soft-fp/fmadf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fma.c: ... here. * soft-fp/fmasf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmaf.c: ... here. * soft-fp/fmatf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmal.c: ... here. * sysdeps/ieee754/soft-fp/Makefile: New file. * sysdeps/arm/preconfigure.ac: Define with_fp_cond. * sysdeps/arm/preconfigure: Regenerated. * sysdeps/arm/nofpu/Implies: New file. * sysdeps/arm/s_fma.c: Remove file. * sysdeps/arm/s_fmaf.c: Likewise. * sysdeps/m68k/coldfire/nofpu/Implies: New file. * sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file. * sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise. * sysdeps/microblaze/Implies: Add ieee754/soft-fp. * sysdeps/microblaze/s_fma.c: Remove file. * sysdeps/microblaze/s_fmaf.c: Likewise. * sysdeps/mips/mips32/nofpu/Implies: New file. * sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n32/nofpu/Implies: Likewise. * sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n64/nofpu/Implies: Likewise. * sysdeps/mips/ieee754/s_fma.c: Remove file. * sysdeps/mips/ieee754/s_fmaf.c: Likewise. * sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal implementation. * sysdeps/nios2/Implies: Add ieee754/soft-fp. * sysdeps/nios2/s_fma.c: Remove file. * sysdeps/nios2/s_fmaf.c: Likewise. * sysdeps/sh/nofpu/Implies: New file. * sysdeps/sh/s_fma.c: Remove file. * sysdeps/sh/s_fmaf.c: Likewise. * sysdeps/tile/Implies: Add ieee754/soft-fp. * sysdeps/tile/s_fma.c: Remove file. * sysdeps/tile/s_fmaf.c: Likewise. |
||
Siddhesh Poyarekar
|
a306c790a8 |
Prefer https for Sourceware links
Update all sourceware links to https. The website redirects everything to https anyway so let the web server do a bit less work. The only reference that remains unchanged is the one in the old ChangeLog, since it didn't seem worth changing it. * NEWS: Update sourceware link to https. * configure.ac: Likewise. * crypt/md5test-giant.c: Likewise. * dlfcn/bug-atexit1.c: Likewise. * dlfcn/bug-atexit2.c: Likewise. * localedata/README: Likewise. * malloc/tst-mallocfork.c: Likewise. * manual/install.texi: Likewise. * nptl/tst-pthread-getattr.c: Likewise. * stdio-common/tst-fgets.c: Likewise. * stdio-common/tst-fwrite.c: Likewise. * sunrpc/Makefile: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise. * wcsmbs/tst-mbrtowc2.c: Likewise. * configure: Regenerate. * INSTALL: Regenerate. |
||
Adhemerval Zanella
|
06be6368da |
nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
||
|
Adhemerval Zanella
|
dff91cd45e |
nptl: Add tests for internal pthread_mutex_t offsets
This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
||
|
Adhemerval Zanella
|
a1a638dda9 |
arm: Implement memchr ifunc selection in C
This patch refactor ARM memchr ifunc selector to a C implementation.
No functional change is expected, including ifunc resolution rules.
It also reorganize the ifunc options code:
1. The memchr_impl.S is renamed to memchr_neon.S and multiple
compilation options (which route to armv6t2/memchr one) is
removed. The code to build if __ARM_NEON__ is defined is
also simplified.
2. A memchr_noneon is added (which as build along previous ifunc
resolution) and includes the armv6t2 direct.
3. Same as 2. for loader object.
Alongside the aforementioned changes, it also some cleanus:
- Internal memchr definition (__GI_memcpy) is now a hidden
symbol.
- No need to create hidden definition for the ifunc variants.
Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi,
arm-linux-gnueabihf with and without multiarch support and with both
GCC 7.1 and GCC mainline.
* sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string]
(sysdeps_routines): Add memchr_noneon.
* sysdeps/arm/armv7/multiarch/ifunc-memchr.h: New file.
* sysdeps/arm/armv7/multiarch/memchr_noneon.S: Likewise.
* sysdeps/arm/armv7/multiarch/rtld-memchr.S: Likewise.
* sysdeps/arm/armv7/multiarch/memchr.S: Remove file.
* sysdeps/arm/armv7/multiarch/memchr.c: New file.
* sysdeps/arm/armv7/multiarch/memchr_impl.S: Move to ...
* sysdeps/arm/armv7/multiarch/memchr_neon.S: ... here.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
||
|
Adhemerval Zanella
|
802c1f1645 |
arm: Implement memcpy ifunc selection in C
This patch refactor ARM memcpy ifunc selector to a C implementation.
No functional change is expected, including ifunc resolution rules.
It also adds some cleanup:
- Internal memcpy hidden definition (__GI_memcpy) is now a hidden
symbol.
- No need to create hidden definition for the ifunc variants.
Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi,
arm-linux-gnueabihf with and without multiarch support and with both
GCC 7.1 and GCC mainline. I also checked with the some possible
multiarch different configurations that trigger different memcpy
buids (__ARM_NEON__ && !__SOFT_FP__, !__ARM_NEON__ && !__SOFT_FP__, and
!__ARM_NEON__ && __SOFT_FP__).
* sysdeps/arm/arm-ifunc.h: New file.
* sysdeps/arm/armv7/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy.c: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_arm.S: Likewise.
* sysdeps/arm/armv7/multiarch/rtld-memcpy.S: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_neon.S [!__ARM_NEON__]
(__memcpy_neon): Avoid create hidden alias.
* sysdeps/arm/armv7/multiarch/memcpy_vfp.S [!__ARM_NEON_]
(__memcpy_vfp): Likewise.
* sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy_arm.
* sysdeps/arm/armv7/multiarch/memcpy.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
||
Szabolcs Nagy
|
94d2f0af15 |
arm: Remove lazy tlsdesc initialization related code
Lazy tlsdesc initialization is no longer used in the dynamic linker so all related code can be removed. * sysdeps/arm/dl-machine.h (elf_machine_runtime_setup): Remove DT_TLSDESC_GOT initialization. * sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_lazy_resolver): Remove. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_lazy_resolver): Remove. (_dl_tlsdesc_resolve_hold): Likewise. * sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_lazy_resolver_fixup): Remove. (_dl_tlsdesc_resolve_hold_fixup): Likewise. |
||
|
Szabolcs Nagy
|
28e1ddf340 |
arm: Remove unnecessary volatile qualifier
There is no reason to treat tlsdesc entries as volatile objects. * sysdeps/arm/dl-machine.h (elf_machine_rel): Remove volatile. |
||
|
Szabolcs Nagy
|
0ca3d1d6d0 |
[BZ #18572] arm: Disable lazy initialization of tlsdesc entries
Follow up to https://sourceware.org/ml/libc-alpha/2015-11/msg00272.html Always do tls descriptor initialization at load time during relocation processing (as if DF_BIND_NOW were set for the binary) to avoid barriers at every tls access. This patch mimics bind-now semantics in the lazy relocation code of the arm target (elf_machine_lazy_rel). Ideally the static linker should be updated too to not emit tlsdesc relocs in DT_REL*, so elf_machine_lazy_rel is not called on them at all. [BZ #18572] * sysdeps/arm/dl-machine.h (elf_machine_lazy_rel): Do symbol binding non-lazily for R_ARM_TLS_DESC. |
||
|
Szabolcs Nagy
|
2c1d4e5fe4 |
[BZ #17078] arm: remove prelinker support for R_ARM_TLS_DESC
This patch reverts
commit
|
||
|
Joseph Myers
|
0db0b931cf |
Update ARM libm-test-ulps.
* sysdeps/arm/libm-test-ulps: Update. |
||
H.J. Lu
|
c34a19ed4b |
arm: Don't check _DYNAMIC in elf_machine_load_address
Since arm can't convert access _DYNAMIC via GOT, which needs dynamic relocation, to PC-relative at link-time, don't check _DYNAMIC in elf_machine_load_address. * sysdeps/arm/dl-machine.h (elf_machine_load_address): Don't check _DYNAMIC. |
||
|
H.J. Lu
|
8172aad937 |
arm: Update elf_machine_load_address for static PIE
When --enable-static-pie is used to configure glibc, we need to use _dl_relocate_static_pie to compute load address in static PIE. * sysdeps/arm/dl-machine.h (elf_machine_load_address): Use _dl_relocate_static_pie instead of _dl_start to compute load address in static PIE. Return 0 if _DYNAMIC is undefined for static executable. |
||
|
H.J. Lu
|
f6c5e5bce0 |
arm: Check PIC instead of SHARED in start.S
Since start.o may be compiled as PIC, we should check PIC instead of SHARED. * sysdeps/arm/start.S (_start): Check PIC instead of SHARED. |
||
Wilco Dijkstra
|
ca3a382ea3 |
Enable unwind info in libc-start.c and backtrace.c
Add unwind info to __libc_start_main so that unwinding continues one extra level to _start. Similarly add unwind info to backtrace. Given many targets require this, do this in a general way. * csu/Makefile: Add -funwind-tables to libc-start.c. * debug/Makefile: Add -funwind-tables to backtrace.c. * sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c. * sysdeps/arm/Makefile: Likewise. * sysdeps/i386/Makefile: Likewise. * sysdeps/m68k/Makefile: Likewise. * sysdeps/mips/Makefile: Likewise. * sysdeps/nios2/Makefile: Likewise. * sysdeps/sh/Makefile: Likewise. * sysdeps/sparc/Makefile: Likewise. |
||
|
Joseph Myers
|
5a80d39d0d |
Obsolete pow10 functions.
This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
||
Florian Weimer
|
17e00cc69e | elf: Remove internal_function attribute | ||
|
Florian Weimer
|
8d2f9410d5 | gmon: Remove internal_function attribute | ||
|
Joseph Myers
|
4fa9b3bfe6 |
Fix mcontext_t sigcontext namespace (bug 21457).
This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise. |
||
|
Joseph Myers
|
3d452dabd1 |
Fix uc_* namespace (bug 21457).
The standard members of ucontext_t, in all standard versions with that type, are uc_link, uc_sigmask, uc_stack and uc_mcontext. The uc_* namespace is mostly reserved for additions to the structure. However, in XPG4.2, it's only reserved when <ucontext.h> is included, not when <signal.h> is included, while <signal.h> is required to define ucontext_t (but not allowed to make visible other symbols from <ucontext.h>). Thus, nonstandard members should avoid uc_* names. Some already do use __uc_*, but others don't; most architectures (all except ia64, I think) have a member uc_flags and some have additional members beyond that. This patch makes nonstandard members have an __ prefix unless __USE_MISC is defined. Members whose names indicate they are solely padding / reserved for future use are renamed unconditionally to use the __glibc_reserved1 naming convention. This is part of the preparation for a revised version of the mcontext_t / sigcontext patch to be able to eliminate all 13 of the miscellaneous XFAILs in conform/Makefile, rather than only 11 of them as at present (at least one further fix on top of this one will be needed for that as well). Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/generic/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/i386/sys/ucontext.h (__ctx): Move undefine further down. (__ctxt): Likewise. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags and uc_regspace. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. Rename uc_filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags, uc_regs_ptr, uc_regs and uc_reg_space. Rename uc_pad to __glibc_reserved1. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (__ctx): Move undefine further down. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (__ctx): New macro. (ucontext_t): Use __ctx with uc_flags. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Use __ctx with uc_flags. |
||
Jiong Wang
|
5ba6405338 |
[ARM] Fix ld.so crash when built using Binutils 2.29
There is bug report that ld.so in GLIBC 2.24 built by Binutils 2.29 will crash on arm-linux-gnueabihf. This is confirmed, and the details is at: https://sourceware.org/bugzilla/show_bug.cgi?id=21725. As analyzed in the PR, the old code was with the assumption that assembler won't set bit0 of thumb function address if it comes from PC-relative instructions and the calculation can be finished during assembling. This assumption however does not hold after PR gas/21458. * sysdeps/arm/dl-machine.h (elf_machine_load_address): Also strip bit 0 of pcrel_address under Thumb mode. |
||
Prakhar Bahuguna
|
f8f72bc0c3 |
[ARM] Optimise memchr for NEON-enabled processors
This patch provides an optimised implementation of memchr using NEON instructions to improve its performance, especially with longer search regions. This gave an improvement in performance against the Thumb2+DSP optimised code, with more significant gains for larger inputs. The NEON code also wins in cases where the input is small (less than 8 bytes) by defaulting to a simple byte-by-byte search. This avoids the overhead imposed by filling two quadword registers from memory. * sysdeps/arm/armv7/multiarch/Makefile: Add memchr_neon to sysdep_routines. * sysdeps/arm/armv7/multiarch/ifunc-impl-list.c: Add define for __memchr_neon. Add ifunc definitions for __memchr_neon and __memchr_noneon. * sysdeps/arm/armv7/multiarch/memchr.S: New file. * sysdeps/arm/armv7/multiarch/memchr_impl.S: Likewise. * sysdeps/arm/armv7/multiarch/memchr_neon.S: Likewise. Testing done: Ran regression tests for arm-none-linux-gnueabihf as well as a full toolchain bootstrap. Benchmark tests were ran on ARMv7-A and ARMv8-A hardware targets. |
||
|
Joseph Myers
|
251287734e |
Rename struct ucontext tag (bug 21457).
The ucontext_t type has a tag struct ucontext. As with previous such issues for siginfo_t and stack_t, this tag is not permitted by POSIX (is not in a reserved namespace), and so namespace conformance means breaking C++ name mangling for this type. In this case, the type does need to have some tag rather than just a typedef name, because it includes a pointer to itself. This patch uses struct ucontext_t as the new tag, so the type is mangled as ucontext_t (the POSIX *_t reservation applies in all namespaces, not just the namespace of ordinary identifiers). Another reserved name such as struct __ucontext could of course be used. Because of other namespace issues, this patch does not by itself fix bug 21457 or allow any XFAILs to be removed. Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct ucontext_t. * sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/powerpc/powerpc32/backtrace.c (struct rt_signal_frame_32): Likewise. * sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64): Likewise. * sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h (__profil_counter): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c (__start_context): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT): Likewise. |
||
Alan Modra
|
0572433b5b |
PowerPC64 ELFv2 PPC64_OPT_LOCALENTRY
ELFv2 functions with localentry:0 are those with a single entry point, ie. global entry == local entry, that have no requirement on r2 or r12 and guarantee r2 is unchanged on return. Such an external function can be called via the PLT without saving r2 or restoring it on return, avoiding a common load-hit-store for small functions. This patch implements the ld.so changes necessary for this optimization. ld.so needs to check that an optimized plt call sequence is in fact calling a function implemented with localentry:0, end emit a fatal error otherwise. The elf/testobj6.c change is to stop "error while loading shared libraries: expected localentry:0 `preload'" when running elf/preloadtest, which we'd get otherwise. * elf/elf.h (PPC64_OPT_LOCALENTRY): Define. * sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add refsym and sym parameters. Adjust callers. * sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New. (_dl_reloc_overflow): Increase buffser size. Formatting. * sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset): Delete reloc param, add refsym and sym. Check optimized plt call stubs for localentry:0 functions. Adjust callers. (elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym and sym parameters. Adjust callers. (_dl_reloc_overflow): Move attribute. (_dl_error_localentry): Declare. * elf/dl-runtime.c (_dl_fixup): Save original sym. Pass refsym and sym to elf_machine_fixup_plt. * elf/testobj6.c (preload): Call printf. |
||
|
Wilco Dijkstra
|
d99431e519 |
Replace all internal uses of __bzero with memset. This removes the need
to redirect it to a builtin and means memset is inlined whenever possible, including with -Os. * sunrpc/bindrsvprt.c (bindresvport): Change __bzero to memset. * sunrpc/clnt_gen.c (clnt_create): Likewise. * sunrpc/des_impl.c (_des_crypt): Likewise. * sunrpc/key_call.c (key_gendes): Likewise. * sunrpc/pmap_rmt.c (clnt_broadcast): Likewise. * sunrpc/svc_simple.c (universal): Likewise. * sunrpc/svc_tcp.c (svctcp_create): Likewise. * sunrpc/svc_udp.c (svcudp_bufcreate): Likewise. * sysdeps/arm/aeabi_memclr.c (__aeabi_memclr): Likewise. |
||
Stefan Liebler
|
12d2dd7060 |
Optimize generic spinlock code and use C11 like atomic macros.
This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise. |
||
|
Joseph Myers
|
139904b7e4 |
Fix more namespace issues in sys/ucontext.h (bug 21457).
Continuing the fixes for namespace issues in sys/ucontext.h, this patch moves various symbols into the implementation namespace in the absence of __USE_MISC. As with previous changes, it is nonexhaustive, just covering more straightforward cases. Structure fields are generally changed to have a prefix __ in the absence of __USE_MISC, via a macro __ctx (used without a space before the open parenthesis, since the result is a single identifier). Various macros such as NGREG also have leading __ added. No changes are made to structure tags (and thus to C++ name mangling), except that in the (unused) file sysdeps/i386/sys/ucontext.h, structures defined inside other structures as the type for a field have their tags removed in the non-__USE_MISC case (those structure tags would not in any case have been visible in C++, because in C++ the scope of such a tag is limited to the containing structure). No changes are made to the contents of bits/sigcontext.h, or to whether it is included. Because of remaining namespace issues, this patch does not yet fix the bug or allow any XFAILs to be removed. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/i386/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (__ctxt): Likewise. (fpregset_t): Use __ctx and __ctxt in defining fields. (mcontext_t): Likewise. * sysdeps/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (__ctx): New macro. (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (__ctx): New macro. [__WORDSIZE == 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE == 32] (gregset_t): Define using __NGREG. [__WORDSIZE == 32] (fpregset_t): Use __ctx in defining fields. (mcontext_t): Likewise. [__WORDSIZE != 32] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__WORDSIZE != 32] (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. [__WORDSIZE != 32] (NVRREG): Rename to __NVRREG and define NVRREG to __NVRREG if [__USE_MISC]. [__WORDSIZE != 32] (gregset_t): Define using __NGREG. [__WORDSIZE != 32] (fpregset_t): Define using __NFPREG. [__WORDSIZE != 32] (vscr_t): Use __ctx in defining fields. [__WORDSIZE != 32] (vrregset_t): Likewise. [__WORDSIZE != 32] (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): New macro. (__psw_t): Use __ctx in defining fields. (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (fpreg_t): Use __ctx in defining fields. (fpregset_t): Likewise. (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if [__USE_MISC]. (fpregset_t): Define using __NFPREG. (__ctx): New macro. (mcontext_t): Use __ctx in defining fields. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (__ctx): New macro. [__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [__x86_64__] (gregset_t): Define using __NGREG. [__x86_64__] (struct _libc_fpxreg): Use __ctx in defining fields. [__x86_64__] (struct _libc_fpstate): Likewise. [__x86_64__] (mcontext_t): Likewise. [!__x86_64__] (NGREG): Rename to __NGREG and define NGREG to __NGREG if [__USE_MISC]. [!__x86_64__] (gregset_t): Define using __NGREG. [!__x86_64__] (struct _libc_fpreg): Use __ctx in defining fields. [!__x86_64__] (struct _libc_fpstate): Likewise. [!__x86_64__] (mcontext_t): Likewise. |
||
|
Joseph Myers
|
cfed8ece79 |
Fix sys/ucontext.h namespace from signal.h etc. inclusion (bug 21457).
The various sys/ucontext.h headers include <signal.h> and all the headers split out of <bits/sigstack.h>. (Except that the powerpc version does not include <signal.h>.) None of the standard versions defining ucontext.h require or permit such inclusions; rather, they all say that the stack_t and sigset_t types from signal.h are defined. This patch fixes the headers to include just the bits/ headers for those types (and the existing includes of bits/sigcontext.h). Since bits/types/sigset_t.h is now being included instead of bits/types/__sigset_t.h, __sigset_t uses in the headers are replaced by direct use of the public sigset_t type. sysdeps/unix/sysv/linux/x86/bits/sigcontext.h was relying on the prior inclusion of <signal.h> to define types such as __uint32_t, so gets a bits/types.h include added to provide those types. Although one could keep some or all of the includes under a __USE_MISC conditional, that seems unnecessary to me, especially given the lack of a <signal.h> include in the powerpc version meaning that portable programs already cannot rely on such an include. Tested for x86_64 and x86, and with build-many-glibcs.py. As with other such fixes, more namespace issues remain so this does not permit any XFAILs to be removed or bugs to be closed. [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/generic/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/i386/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h>. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h: Include <bits/types.h>. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or <bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of <bits/types/__sigset_t.h>. (ucontext_t): Use sigset_t instead of __sigset_t. |
||
Zack Weinberg
|
a992f506ff |
Remove __need macros from signal.h.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t, sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a scalar, so it's now directly available from bits/types.h. The others get bits/types/ headers. Side effects include: There have been small changes to which non-signal headers expose which subset of the signal-related types. A couple of architectures' nested siginfo_t fields had to be renamed to prevent undesired macro expansion. Internal code that wants to manipulate signal masks must now include <sigsetops.h> (which is not installed) and should be aware that __sigaddset, __sigandset, __sigdelset, __sigemptyset, and __sigorset no longer return a value (unlike the public API). Relatedly, the public signal.h no longer declares any of those functions. The obsolete sigmask() macro no longer has a system-specific definition -- in the cases where it matters, it didn't work anyway. New Linux architectures should create bits/siginfo-arch.h and/or bits/siginfo-consts-arch.h to customize their siginfo_t, rather than duplicating everything in bits/siginfo.h (which no longer exists). Add new __SI_* macros if necessary. Ports to other operating systems are strongly encouraged to generalize this scheme further. * bits/sigevent-consts.h * bits/siginfo-consts.h * bits/types/__sigset_t.h * bits/types/sigevent_t.h * bits/types/siginfo_t.h * sysdeps/unix/sysv/linux/bits/sigevent-consts.h * sysdeps/unix/sysv/linux/bits/siginfo-consts.h * sysdeps/unix/sysv/linux/bits/types/__sigset_t.h * sysdeps/unix/sysv/linux/bits/types/sigevent_t.h * sysdeps/unix/sysv/linux/bits/types/siginfo_t.h: New system-dependent bits headers. * sysdeps/unix/sysv/linux/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h * sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h * sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h: New Linux-only system-dependent bits headers. * signal/bits/types/sig_atomic_t.h * signal/bits/types/sigset_t.h * signal/bits/types/sigval_t.h: New non-system-dependent bits headers. * sysdeps/generic/sigsetops.h * sysdeps/unix/sysv/linux/sigsetops.h: New internal headers. * include/bits/types/sig_atomic_t.h * include/bits/types/sigset_t.h * include/bits/types/sigval_t.h: New wrappers. * signal/sigsetops.h * bits/siginfo.h * bits/sigset.h * sysdeps/unix/sysv/linux/bits/siginfo.h * sysdeps/unix/sysv/linux/bits/sigset.h * sysdeps/unix/sysv/linux/ia64/bits/siginfo.h * sysdeps/unix/sysv/linux/mips/bits/siginfo.h * sysdeps/unix/sysv/linux/s390/bits/siginfo.h * sysdeps/unix/sysv/linux/sparc/bits/siginfo.h * sysdeps/unix/sysv/linux/tile/bits/siginfo.h * sysdeps/unix/sysv/linux/x86/bits/siginfo.h: Deleted. * signal/Makefile, sysdeps/unix/sysv/linux/Makefile: Update lists of installed headers. * posix/bits/types.h: Define __sig_atomic_t here. * signal/signal.h: Use the new bits headers; no need to handle __need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask to define sigmask. * include/signal.h: No need to handle __need_sig_atomic_t nor __need_sigset_t. Don't define __sigemptyset. * io/sys/poll.h, setjmp/setjmp.h * sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h * sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h * sysdeps/mach/hurd/i386/bits/sigcontext.h * sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h * sysdeps/pthread/bits/sigthread.h * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h * sysdeps/unix/sysv/linux/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/s390/sys/ucontext.h * sysdeps/unix/sysv/linux/sh/sys/ucontext.h * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h * sysdeps/unix/sysv/linux/tile/sys/ucontext.h * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Use bits/types/__sigset_t.h. * misc/sys/select.h, posix/spawn.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/sys/epoll.h * sysdeps/unix/sysv/linux/sys/signalfd.h: Use bits/types/sigset_t.h. * resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h. * rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h. * socket/sys/socket.h: Don't include bits/sigset.h. * login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c * signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c * sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c * sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c * sysdeps/unix/sysv/linux/nptl-signals.h: Include sigsetops.h. * signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c * signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c * sysdeps/posix/signal.c, sysdeps/posix/sigset.c: __sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset now return no value. * signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c Include <errno.h>, <signal.h>, and <sigsetops.h> instead of "sigsetops.h". * signal/sigsetops.c: Explicitly define __sigismember, __sigaddset, and __sigdelset as compatibility symbols. * signal/Versions: Correct commentary on __sigpause, __sigaddset, __sigdelset, __sigismember. * inet/rcmd.c: Include sigsetops.h. Convert old code using __sigblock/__sigsetmask to use __sigprocmask and friends. |
||
|
Zack Weinberg
|
81cb7a0b2b |
Remove sfi_* annotations from ARM assembly files.
This semi-mechanical patch removes all uses and definitions of the
sfi_breg, sfi_pld, and sfi_sp macros from various ARM-specific
assembly files. These were only used by NaCl.
* sysdeps/arm/sysdep.h
(ARM_SFI_MACROS, sfi_breg, sfi_pld, sfi_sp): Delete definitions.
* sysdeps/arm/__longjmp.S, sysdeps/arm/add_n.S
* sysdeps/arm/addmul_1.S, sysdeps/arm/arm-mcount.S
* sysdeps/arm/armv6/rawmemchr.S, sysdeps/arm/armv6/strchr.S
* sysdeps/arm/armv6/strcpy.S, sysdeps/arm/armv6/strlen.S
* sysdeps/arm/armv6/strrchr.S, sysdeps/arm/armv6t2/memchr.S
* sysdeps/arm/armv6t2/strlen.S
* sysdeps/arm/armv7/multiarch/memcpy_impl.S
* sysdeps/arm/armv7/strcmp.S, sysdeps/arm/dl-tlsdesc.S
* sysdeps/arm/memcpy.S, sysdeps/arm/memmove.S
* sysdeps/arm/memset.S, sysdeps/arm/setjmp.S
* sysdeps/arm/strlen.S, sysdeps/arm/submul_1.S:
Remove all uses of sfi_breg, sfi_pld, and sfi_sp.
|
||
|
Zack Weinberg
|
42a844c6a2 |
Remove the bulk of the NaCl port.
The NaCl port has not been actively maintained since before the 2.25 release. The complementary GCC back-end was never contributed to GCC, and we are given to understand that the current NaCl SDK has switched to Clang and therefore cannot be used to build glibc anymore, so we doubt that the port remains useful. This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl directories and the abi-tags entry. Remove the NaCl port. * abi-tags: Remove .*-.*-nacl.* entry. * sysdeps/arm/nacl: Remove directory and contents. * sysdeps/nacl: Likewise. |
||
|
Joseph Myers
|
0bcec5321f |
Split up bits/sigstack.h.
bits/sigstack.h contains four things: the legacy struct sigstack type, the preferred stack_t type, the SS_* enum values and macros for signal stack sizes. These vary in different ways between glibc configurations; in particular, the stack sizes vary much more than any of the other pieces. Furthermore, these pieces have different standard namespace rules for when they should be visible (not currently visible in conform/ results both because the relevant tests are XFAILed for sys/ucontext.h namespace issues, and because some of the expectations are incorrect in the same way as the headers, e.g. neither expectations nor headers reflect that current POSIX no longer has either the sigstack function or the sigstack structure). To reduce duplication of identical definitions, and facilitate namespace fixes without requiring the same feature test macro conditions to be repeated in many versions of the same header, this patch splits bits/sigstack.h up into four headers. It keeps the stack size macros, while new bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h are added for the other pieces. bits/types/struct_sigstack.h is the same everywhere, bits/types/stack_t.h has three variants different in the order of the structure elements (generic = MIPS Linux, and other Linux), and bits/ss_flags.h has generic and Linux variants. This patch includes the new headers everywhere that included <bits/sigstack.h>, so should cause no difference to what any public header defines. Subsequent namespace fixes would then remove or condition some of those includes. There should be no conflicts with Zack's changes to signal.h types, beyond the trivial conflict of both making additions to signal/Makefile's headers list; the two patches affect disjoint sets of types and other definitions. Tested for x86_64 and x86, and with build-many-glibcs.py. * bits/ss_flags.h: New file. * bits/types/stack_t.h: Likewise. * include/bits/types/struct_sigstack.h: Likewise. * signal/bits/types/struct_sigstack.h: Likewise. * sysdeps/unix/sysv/linux/bits/ss_flags.h: Likewise. * sysdeps/unix/sysv/linux/bits/types/stack_t.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h: Likewise. * signal/Makefile (headers): Add bits/types/struct_sigstack.h, bits/types/stack_t.h and bits/ss_flags.h. * signal/signal.h [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * bits/sigstack.h (struct sigstack): Remove. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/mips/bits/sigstack.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sigstack.h (struct sigstack): Likewise. (stack_t): Likewise. (SS_ONSTACK): Likewise. (SS_DISABLE): Likewise. * sysdeps/arm/sys/ucontext.h: Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and <bits/ss_flags.h>. * sysdeps/generic/sys/ucontext.h: Likewise. * sysdeps/i386/sys/ucontext.h: Likewise. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Likewise. |
||
|
Joseph Myers
|
5df4854ed2 |
Condition some sys/ucontext.h contents on __USE_MISC (bug 21457).
Continuing the fixes for namespace issues arising from sys/ucontext.h, this patch conditions various definitions, that are not needed for defining mcontext_t / ucontext_t, on __USE_MISC, so they do not appear in strict POSIX modes. This patch is non-exhaustive; that is, it only conditions straightforward cases and there may be more such definitions that can be conditioned for these and other architectures, to be dealt with later in separate patches. Also, using __USE_MISC is the minimum change for these definitions where they conflict with POSIX; some headers already have __USE_GNU conditionals on similar definitions of names for registers. The patch specifically does not do anything with definitions in bits/sigcontext.h, and nor does it condition any inclusions of bits/sigcontext.h even where in fact that is not needed on some architectures for the definitions of mcontext_t / ucontext_t. As other namespace issues in these headers remain, this patch does not fix bug 21457, nor allow any XFAILs to be removed. Tested with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (R0): Condition on [__USE_MISC]. (R1): Likewise. (R2): Likewise. (R3): Likewise. (R4): Likewise. (R5): Likewise. (R6): Likewise. (R7): Likewise. (R8): Likewise. (R9): Likewise. (R10): Likewise. (R11): Likewise. (R12): Likewise. (R13): Likewise. (R14): Likewise. (R15): Likewise. * sysdeps/i386/sys/ucontext.h (REG_GS): Likewise. (REG_FS): Likewise. (REG_ES): Likewise. (REG_DS): Likewise. (REG_EDI): Likewise. (REG_ESI): Likewise. (REG_EBP): Likewise. (REG_ESP): Likewise. (REG_EBX): Likewise. (REG_EDX): Likewise. (REG_ECX): Likewise. (REG_EAX): Likewise. (REG_TRAPNO): Likewise. (REG_ERR): Likewise. (REG_EIP): Likewise. (REG_CS): Likewise. (REG_EFL): Likewise. (REG_UESP): Likewise. (REG_SS): Likewise. * sysdeps/m68k/sys/ucontext.h (R_D0): Likewise. (R_D1): Likewise. (R_D2): Likewise. (R_D3): Likewise. (R_D4): Likewise. (R_D5): Likewise. (R_D6): Likewise. (R_D7): Likewise. (R_A0): Likewise. (R_A1): Likewise. (R_A2): Likewise. (R_A3): Likewise. (R_A4): Likewise. (R_A5): Likewise. (R_A6): Likewise. (R_A7): Likewise. (R_SP): Likewise. (R_PC): Likewise. (R_PS): Likewise. (fpregset_t): Likewise. (MCONTEXT_VERSION): Likewise. * sysdeps/mips/sys/ucontext.h (CTX_R0): Likewise. (CTX_AT): Likewise. (CTX_V0): Likewise. (CTX_V1): Likewise. (CTX_A0): Likewise. (CTX_A1): Likewise. (CTX_A2): Likewise. (CTX_A3): Likewise. (CTX_T0): Likewise. (CTX_T1): Likewise. (CTX_T2): Likewise. (CTX_T3): Likewise. (CTX_T4): Likewise. (CTX_T5): Likewise. (CTX_T6): Likewise. (CTX_T7): Likewise. (CTX_S0): Likewise. (CTX_S1): Likewise. (CTX_S2): Likewise. (CTX_S3): Likewise. (CTX_S4): Likewise. (CTX_S5): Likewise. (CTX_S6): Likewise. (CTX_S7): Likewise. (CTX_T8): Likewise. (CTX_T9): Likewise. (CTX_K0): Likewise. (CTX_K1): Likewise. (CTX_GP): Likewise. (CTX_SP): Likewise. (CTX_S8): Likewise. (CTX_RA): Likewise. (CTX_MDLO): Likewise. (CTX_MDHI): Likewise. (CTX_CAUSE): Likewise. (CTX_EPC): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Condition inclusion of <sys/procfs.h> on [__USE_MISC]. (greg_t): Condition on [__USE_MISC]. (gregset_t): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (greg_t): Likewise. (NGREG): Likewise. (gregset_t): Likewise. (REG_R0): Likewise. (REG_R1): Likewise. (REG_R2): Likewise. (REG_R3): Likewise. (REG_R4): Likewise. (REG_R5): Likewise. (REG_R6): Likewise. (REG_R7): Likewise. (REG_R8): Likewise. (REG_R9): Likewise. (REG_R10): Likewise. (REG_R11): Likewise. (REG_R12): Likewise. (REG_R13): Likewise. (REG_R14): Likewise. (REG_R15): Likewise. (struct _libc_fpstate): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (NGREG): Likewise. (NFPREG): Likewise. (gregset_t): Likewise. (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (R_D0): Likewise. (R_D1): Likewise. (R_D2): Likewise. (R_D3): Likewise. (R_D4): Likewise. (R_D5): Likewise. (R_D6): Likewise. (R_D7): Likewise. (R_A0): Likewise. (R_A1): Likewise. (R_A2): Likewise. (R_A3): Likewise. (R_A4): Likewise. (R_A5): Likewise. (R_A6): Likewise. (R_A7): Likewise. (R_SP): Likewise. (R_PC): Likewise. (R_PS): Likewise. (fpregset_t): Likewise. (MCONTEXT_VERSION): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (MCONTEXT_VERSION): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (REG_R0): Likewise. (REG_R1): Likewise. (REG_R2): Likewise. (REG_R3): Likewise. (REG_R4): Likewise. (REG_R5): Likewise. (REG_R6): Likewise. (REG_R7): Likewise. (REG_R8): Likewise. (REG_R9): Likewise. (REG_R10): Likewise. (REG_R11): Likewise. (REG_R12): Likewise. (REG_R13): Likewise. (REG_R14): Likewise. (REG_R15): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Condition inclusion of <arch/abi.h> on [__USE_MISC]. (greg_t): Condition on [__USE_MISC]. (NGREG): Likewise. (gregset_t): Likewise. |
||
|
Adhemerval Zanella
|
0a19a91896 |
Remove wrong definitions from pthread header refactor
This patch removes wrong struct definition from
|
||
|
Adhemerval Zanella
|
eab380d8ec |
Move shared pthread definitions to common headers
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
|
||
|
Joseph Myers
|
9174b4c3b6 |
Update arm, mips, powerpc-nofpu libm-test-ulps.
* sysdeps/arm/libm-test-ulps: Update. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
3a66b2b063 |
Fix ARM fpu_control.h for assemblers requiring VFP insn names (bug 21047).
Bug 21047 reports that the clang assembler disallows the ARM implementations of _FPU_GETCW and _FPU_SETCW. These are deliberately written the way they are, using generic coprocessor instructions (from the days when VFP was just one possible coprocessor for ARM) that have the right encodings, to handle the case of the instructions being used runtime-conditionally inside glibc, where use of these macros is not meant to result in either the assembler requiring VFP to be enabled at assembly time or in it marking the object as using VFP. However, more recent ARM ARM versions have restricted the definitions of the coprocessor instructions and reportedly the clang assembler follows that in disallowing those names for VFP instructions. In the non-__SOFTFP__ case - which in fact is the only case where these macro definitions can be used outside the build of glibc itself - using VFP instruction names is of course fine, since we know that VFP is enabled for that compilation. Thus, this patch uses the current VFP names for these instructions in that case to improve compatibility for this header file. Tested for hard-float and soft-float builds of glibc, including that installed stripped shared libraries are unchanged by the patch. [BZ #21047] * sysdeps/arm/fpu_control.h [!__SOFTFP__] (_FPU_GETCW): Use VFP name for instruction. [!__SOFTFP__] (_FPU_SETCW): Likewise. |
||
Torvald Riegel
|
cc25c8b4c1 |
New pthread rwlock that is more scalable.
This replaces the pthread rwlock with a new implementation that uses a more scalable algorithm (primarily through not using a critical section anymore to make state changes). The fast path for rdlock acquisition and release is now basically a single atomic read-modify write or CAS and a few branches. See nptl/pthread_rwlock_common.c for details. * nptl/DESIGN-rwlock.txt: Remove. * nptl/lowlevelrwlock.sym: Remove. * nptl/Makefile: Add new tests. * nptl/pthread_rwlock_common.c: New file. Contains the new rwlock. * nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove. (PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED, PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT, PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER, PTHREAD_RWLOCK_FUTEX_USED): New. * nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new implementation. * nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove. (__pthread_rwlock_rdlock): Adapt. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Adapt. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Adapt. * nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt. * nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt. * nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove. (__pthread_rwlock_wrlock): Adapt. * nptl/tst-rwlock10.c: Adapt. * nptl/tst-rwlock11.c: Adapt. * nptl/tst-rwlock17.c: New file. * nptl/tst-rwlock18.c: New file. * nptl/tst-rwlock19.c: New file. * nptl/tst-rwlock2b.c: New file. * nptl/tst-rwlock8.c: Adapt. * nptl/tst-rwlock9.c: Adapt. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt. * nptl/nptl-printers.py (): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-rwlock-printers.py: Adapt. * nptl/test-rwlockattr-printers.c: Adapt. * nptl/test-rwlockattr-printers.py: Adapt. |
||
|
Joseph Myers
|
bfff8b1bec | Update copyright dates with scripts/update-copyrights. | ||
|
Torvald Riegel
|
ed19993b5b |
New condvar implementation that provides stronger ordering guarantees.
This is a new implementation for condition variables, required after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In essence, we need to be stricter in which waiters a signal or broadcast is required to wake up; this couldn't be solved using the old algorithm. ISO C++ made a similar clarification, so this also fixes a bug in current libstdc++, for example. We can't use the old algorithm anymore because futexes do not guarantee to wake in FIFO order. Thus, when we wake, we can't simply let any waiter grab a signal, but we need to ensure that one of the waiters happening before the signal is woken up. This is something the previous algorithm violated (see bug 13165). There's another issue specific to condvars: ABA issues on the underlying futexes. Unlike mutexes that have just three states, or semaphores that have no tokens or a limited number of them, the state of a condvar is the *order* of the waiters. A waiter on a semaphore can grab a token whenever one is available; a condvar waiter must only consume a signal if it is eligible to do so as determined by the relative order of the waiter and the signal. Therefore, this new algorithm maintains two groups of waiters: Those eligible to consume signals (G1), and those that have to wait until previous waiters have consumed signals (G2). Once G1 is empty, G2 becomes the new G1. 64b counters are used to avoid ABA issues. This condvar doesn't yet use a requeue optimization (ie, on a broadcast, waking just one thread and requeueing all others on the futex of the mutex supplied by the program). I don't think doing the requeue is necessarily the right approach (but I haven't done real measurements yet): * If a program expects to wake many threads at the same time and make that scalable, a condvar isn't great anyway because of how it requires waiters to operate mutually exclusive (due to the mutex usage). Thus, a thundering herd problem is a scalability problem with or without the optimization. Using something like a semaphore might be more appropriate in such a case. * The scalability problem is actually at the mutex side; the condvar could help (and it tries to with the requeue optimization), but it should be the mutex who decides how that is done, and whether it is done at all. * Forcing all but one waiter into the kernel-side wait queue of the mutex prevents/avoids the use of lock elision on the mutex. Thus, it prevents the only cure against the underlying scalability problem inherent to condvars. * If condvars use short critical sections (ie, hold the mutex just to check a binary flag or such), which they should do ideally, then forcing all those waiter to proceed serially with kernel-based hand-off (ie, futex ops in the mutex' contended state, via the futex wait queues) will be less efficient than just letting a scalable mutex implementation take care of it. Our current mutex impl doesn't employ spinning at all, but if critical sections are short, spinning can be much better. * Doing the requeue stuff requires all waiters to always drive the mutex into the contended state. This leads to each waiter having to call futex_wake after lock release, even if this wouldn't be necessary. [BZ #13165] * nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to use new algorithm. * nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * nptl/pthread_cond_init.c (__pthread_cond_init): Likewise. * nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise. (__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c. (__condvar_confirm_wakeup, __condvar_cancel_waiting, __condvar_cleanup_waiting, __condvar_dec_grefs, __pthread_cond_wait_common): New. (__condvar_cleanup): Remove. * npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt. * npt/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared): Likewise. * npt/pthread_condattr_init.c (pthread_condattr_init): Likewise. * nptl/tst-cond1.c: Add comment. * nptl/tst-cond20.c (do_test): Adapt. * nptl/tst-cond22.c (do_test): Likewise. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt structure. * sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise. * sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove. (COND_CLOCK_BITS): Adapt. * sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt. * nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK, __PTHREAD_COND_SHARED_MASK): New. * nptl/nptl-printers.py (CLOCK_IDS): Remove. (ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt. * nptl/nptl_lock_constants.pysym: Adapt. * nptl/test-cond-printers.py: Adapt. * sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear, cond_compat_check_and_clear): Adapt. * sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ... * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_timedwait): ... and move here. * nptl/DESIGN-condvar.txt: Remove file. * nptl/lowlevelcond.sym: Likewise. * nptl/pthread_cond_timedwait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise. |
||
|
Zack Weinberg
|
ea1bd74def |
New string function explicit_bzero (from OpenBSD).
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the compiler is not allowed to delete a call to explicit_bzero even if the memory pointed to by 's' is dead after the call. Right now, this effect is achieved externally by having explicit_bzero be a function whose semantics are unknown to the compiler, and internally, with a no-op asm statement that clobbers memory. This does mean that small explicit_bzero operations cannot be expanded inline as small memset operations can, but on the other hand, small memset operations do get deleted by the compiler. Hopefully full compiler support for explicit_bzero will happen relatively soon. There are two new tests: test-explicit_bzero.c verifies the visible semantics in the same way as the existing test-bzero.c, and tst-xbzero-opt.c verifies the not-being-optimized-out property. The latter is conceptually based on a test written by Matthew Dempsky for the OpenBSD regression suite. The crypt() implementation has an immediate use for this new feature. We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero by running all of libcrypt's calls through the fortified variant, __explicit_bzero_chk, which is in the impl namespace anyway. Currently I'm not aware of anything in libc proper that needs this, but the glue is all in place if it does become necessary. The legacy DES implementation wasn't bothering to clear its buffers, so I added that, mostly for consistency's sake. * string/explicit_bzero.c: New routine. * string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests. * string/Makefile (routines, strop-tests, tests): Add them. * string/test-memset.c: Add ifdeffage for testing explicit_bzero. * string/string.h [__USE_MISC]: Declare explicit_bzero. * debug/explicit_bzero_chk.c: New routine. * debug/Makefile (routines): Add it. * debug/tst-chk1.c: Test fortification of explicit_bzero. * string/bits/string3.h: Fortify explicit_bzero. * manual/string.texi: Document explicit_bzero. * NEWS: Mention addition of explicit_bzero. * crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate data before returning, using explicit_bzero. * crypt/md5-crypt.c (__md5_crypt_r): Likewise. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * include/string.h: Redirect internal uses of explicit_bzero to __explicit_bzero_chk[_internal]. * string/Versions [GLIBC_2.25]: Add explicit_bzero. * debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk. * sysdeps/arm/nacl/libc.abilist * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add entries for explicit_bzero and __explicit_bzero_chk. |
||
|
Florian Weimer
|
92dcaa3e2f | Add getentropy, getrandom, <sys/random.h> [BZ #17252] | ||
|
Joseph Myers
|
f11e220d2d |
Refactor FP_FAST_* into bits/fp-fast.h.
Continuing the refactoring of bits/mathdef.h, this patch moves the FP_FAST_* definitions into a new bits/fp-fast.h header. Currently this is only for FP_FAST_FMA*, but in future it would be the appropriate place for the FP_FAST_* macros from TS 18661-1 as well. The generic bits/mathdef.h header defines these macros based on whether the compiler defines __FP_FAST_*. Most architecture-specific headers, however, fail to do so, meaning that if the architecture (or some particular processors) does in fact have fused operations, and GCC knows to use them inline, the FP_FAST_* macros will still not be defined. By refactoring, this patch causes the generic version (based on __FP_FAST_*) to be used in more cases, and so the macro definitions to be more accurate. Architectures that already defined some or all of these macros other than based on the predefines have their own versions of fp-fast.h, which are arranged so they define FP_FAST_* if either the architecture-specific conditions are true or __FP_FAST_* are defined. After this refactoring, various bits/mathdef.h headers for architectures with long double = double are semantically identical to the generic version. The patch removes those headers that are redundant. (In fact two of the four removed were already redundant before this patch because they did use __FP_FAST_*.) Tested for x86_64 and x86, and compilation-only with build-many-glibcs.py. * bits/fp-fast.h: New file. * sysdeps/aarch64/bits/fp-fast.h: Likewise. * sysdeps/powerpc/bits/fp-fast.h: Likewise. * math/Makefile (headers): Add bits/fp-fast.h. * math/math.h: Include <bits/fp-fast.h>. * bits/mathdef.h (FP_FAST_FMA): Remove. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/arm/bits/mathdef.h: Remove file. * sysdeps/hppa/fpu/bits/mathdef.h: Likewise. * sysdeps/sh/sh4/bits/mathdef.h: Likewise. * sysdeps/tile/bits/mathdef.h: Likewise. |
||
|
Adhemerval Zanella
|
c579f48edb |
Remove cached PID/TID in clone
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
|
||
|
Joseph Myers
|
93eb85ceb2 |
Refactor float_t, double_t information into bits/flt-eval-method.h.
At present, definitions of float_t and double_t are split among many bits/mathdef.h headers. For all but three architectures, these types are float and double. Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that provides a more generic way of determining the correct values of these typedefs. Defining these typedefs more generally based on __FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in <https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>. This patch refactors things in the way I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new header bits/flt-eval-method.h defines a single macro, __GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define float_t and double_t. The default is based on __FLT_EVAL_METHOD__ (although actually a default to 0 would have the same effect for current ports, because ports where values other than 0 or 16 are possible all have their own headers). To avoid changing the existing semantics in any case, including for compilers not defining __FLT_EVAL_METHOD__, architecture-specific files are then added for m68k, s390, x86 which replicate the existing semantics. At least with __FLT_EVAL_METHOD__ values possible with GCC, there should be no change to the choices of float_t and double_t for any supported configuration. Architecture maintainer notes: * m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It might make sense to make the header prefer to base things on __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make the choices of these types more accurate (with a NEWS entry as for the other changes to these types on particular architectures). * s390: sysdeps/s390/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As previously discussed, it might make sense in coordination with GCC to eliminate the historic mistake, avoid excess precision in the -fexcess-precision=standard case and make the typedefs match (with a NEWS entry, again). Tested for x86-64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/flt-eval-method.h: New file. * sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise. * sysdeps/s390/bits/flt-eval-method.h: Likewise. * sysdeps/x86/bits/flt-eval-method.h: Likewise. * math/Makefile (headers): Add bits/flt-eval-method.h. * math/math.h: Include <bits/flt-eval-method.h>. [__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD. [__USE_ISOC99] (double_t): Likewise. * bits/mathdef.h (float_t): Remove. (double_t): Likewise. * sysdeps/aarch64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/alpha/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/arm/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/ia64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/mips/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/powerpc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/s390/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sparc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/tile/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/x86/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. |
||
|
Florian Weimer
|
c74940f2a7 | nptl: Document the reason why __kind in pthread_mutex_t is part of the ABI | ||
|
Joseph Myers
|
799131036e |
Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).
manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise. |
||
Gabriel F. T. Gomes
|
6962682ffe |
Add strfromd, strfromf, and strfroml functions
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib. This patch adds strfromd, strfromf, and strfroml. This is being done in preparation for the new floating-point type, float128. The added functions convert a floating-point value into a string, with configurable format. |
||
|
Joseph Myers
|
0f04fc07f6 |
Use VSQRT instruction for ARM sqrt (bug 20660).
This patch makes ARM sqrt and sqrtf use the VSQRT VFP square root
instruction when available, instead of much larger generic code for
computing square roots.
Now, GCC will normally inline sqrt calls except for negative arguments
where errno needs to be set, and because the benchtests fail to use
-fno-builtin that means no significant difference in benchmark results
for sqrt (note, however, there are lots of __ieee754_sqrt calls
internally in libm, which are *not* inlined - although some
architectures define __ieee754_sqrt in their math_private.h for that
purpose, ARM doesn't - so improving out-of-line sqrt performance is
still relevant to those other functions, if not for most ordinary
direct users of sqrt). With the benchtests changed to use
-fno-builtin for sqrt tests, typical performance results before the
change are ("max" is wildly varying in any case):
"duration": 9.88358e+09,
"iterations": 4.8783e+07,
"max": 457.764,
"min": 183.105,
"mean": 202.603
and after it are:
"duration": 9.45663e+09,
"iterations": 2.24385e+08,
"max": 274.659,
"min": 30.517,
"mean": 42.1447
Tested for ARM (hard-float and soft-float).
[BZ #20660]
* sysdeps/arm/e_sqrt.c: New file.
* sysdeps/arm/e_sqrtf.c: Likewise.
|
||
|
Zack Weinberg
|
4775578486 |
Installed header hygiene (BZ#20366): Test of installed headers.
This adds a test to ensure that the problems fixed in the last several patches do not recur. Each directory checks the headers that it installs for two properties: first, each header must be compilable in isolation, as both C and C++, under a representative combination of language and library conformance levels; second, there is a blacklist of identifiers that may not appear in any installed header, currently consisting of the legacy BSD typedefs. (There is an exemption for the headers that define those typedefs, and for the RPC headers. It may be necessary to make this more sophisticated if we add more stuff to the blacklist in the future.) In order for this test to work correctly, every wrapper header that actually defines something must guard those definitions with #ifndef _ISOMAC. This is the existing mechanism used by the conform/ tests to tell wrapper headers not to define anything that the public header wouldn't, and not to use anything from libc-symbols.h. conform/ only cares for headers that we need to check for standards conformance, whereas this test applies to *every* header. (Headers in include/ that are either installed directly, or are internal-use-only and do *not* correspond to any installed header, are not affected.) * scripts/check-installed-headers.sh: New script. * Rules: In each directory that defines header files to be installed, run check-installed-headers.sh on them as a special test. * Makefile: Likewise for the headers installed at top level. * include/aliases.h, include/alloca.h, include/argz.h * include/arpa/nameser.h, include/arpa/nameser_compat.h * include/elf.h, include/envz.h, include/err.h * include/execinfo.h, include/fpu_control.h, include/getopt.h * include/gshadow.h, include/ifaddrs.h, include/libintl.h * include/link.h, include/malloc.h, include/mcheck.h * include/mntent.h, include/netinet/ether.h * include/nss.h, include/obstack.h, include/printf.h * include/pty.h, include/resolv.h, include/rpc/auth.h * include/rpc/auth_des.h, include/rpc/auth_unix.h * include/rpc/clnt.h, include/rpc/des_crypt.h * include/rpc/key_prot.h, include/rpc/netdb.h * include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h * include/rpc/pmap_rmt.h, include/rpc/rpc.h * include/rpc/rpc_msg.h, include/rpc/svc.h * include/rpc/svc_auth.h, include/rpc/xdr.h * include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h * include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h * include/rpcsvc/ypupd.h, include/shadow.h * include/stdio_ext.h, include/sys/epoll.h * include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h * include/sys/prctl.h, include/sys/profil.h * include/sys/statfs.h, include/sys/sysctl.h * include/sys/sysinfo.h, include/ttyent.h, include/utmp.h * sysdeps/arm/nacl/include/bits/setjmp.h * sysdeps/mips/include/sys/asm.h * sysdeps/unix/sysv/linux/include/sys/sysinfo.h * sysdeps/unix/sysv/linux/include/sys/timex.h * sysdeps/x86/fpu/include/bits/fenv.h: Add #ifndef _ISOMAC guard around internal declarations. Add multiple-inclusion guard if not already present. |