The Linux 5.3 uapi headers have some rearrangement relating to MAP_*
constants, which includes the effect of adding definitions of MAP_SYNC
on powerpc and sparc. This patch updates the corresponding glibc
bits/mman.h headers accordingly, and updates the Linux kernel version
number in tst-mman-consts.py to reflect that these constants are now
current with that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC]
(MAP_SYNC): New macro.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC]
(MAP_SYNC): Likewise.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.3.
fesetenv_mode is used variously to write the FPSCR exception enable
bits and rounding mode bits. These are referred to as the control
bits in the POWER ISA. Change the name to be reflective of its
current and expected use, and match up well with fegetenv_control.
libc_feholdsetround_noex_ppc_ctx currently performs:
1. Read FPSCR, save to context.
2. Create new FPSCR value: clear enables and set new rounding mode.
3. Write new value to FPSCR.
Since other bits just pass through, there is no need to write them.
Instead, write just the changed values (enables and rounding mode),
which can be a bit more efficient.
fegetenv_status is used variously to retrieve the FPSCR exception enable
bits, rounding mode bits, or both. These are referred to as the control
bits in the POWER ISA. FPSCR status bits are also returned by the
'mffs' and 'mffsl' instructions, but they are uniformly ignored by all
uses of fegetenv_status. Change the name to be reflective of its
current and expected use.
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
On POWER9, use more efficient means to update the 2-bit rounding mode
via the 'mffscrn' instruction (instead of two 'mtfsb0/1' instructions
or one 'mtfsfi' instruction that modifies 4 bits).
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
ROUND_TO_ODD and a couple of other places use libc_feupdateenv_test to
restore the rounding mode and exception enables, preserve exception flags,
and test whether given exception(s) were generated.
If the exception flags haven't changed, then it is sufficient and a bit
more efficient to just restore the rounding mode and enables, rather than
writing the full Floating-Point Status and Control Register (FPSCR).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
fenv_private.h includes unused functions, magic macro constants, and
some replicated common code fragments.
Remove unused functions, replace magic constants with constants from
fenv_libc.h, and refactor replicated code.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
This patch adds the new TCP_TX_DELAY constant from Linux 5.3 to
sysdeps/gnu/netinet/tcp.h.
Tested for x86_64.
* sysdeps/gnu/netinet/tcp.h (TCP_TX_DELAY): New macro.
SET_RESTORE_ROUND brackets a block of code, temporarily setting and
restoring the rounding mode and letting everything else, including
exceptions generated within the block, pass through.
On powerpc, the current code clears the exception enables, which will hide
exceptions generated within the block. This issue was introduced by me
in commit e905212627.
Fix this by not clearing exception enable bits in the prologue.
Also, since we are no longer changing the enable bits in either the
prologue or the epilogue, there is no need to test for entering/exiting
non-stop mode.
Also, optimize the prologue get/save/set rounding mode operations for
POWER9 and later by using 'mffscrn' when possible.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Fixes: e905212627
2019-09-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_and_set_rn): New.
(__fe_mffscrn): New.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc_ctx):
Do not clear enable bits, remove obsolete code, use
fegetenv_and_set_rn.
(libc_feresetround_ppc): Remove obsolete code, use
fegetenv_and_set_rn.
Use macro _HP_TIMING_S390_H instead of _HP_TIMING_H
in s390 specific hp-timing.h
ChangeLog:
* sysdeps/s390/hp-timing.h (_HP_TIMING_H): Undefine.
(_HP_TIMING_S390_H): Define.
This patch updates syscall-names.list for Linux 5.3, adding two new
syscalls.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.3.
(clone3): New syscall.
(pidfd_open): Likewise.
This patch adds support for HP_TIMING_NOW if we build at least
with -march=z10 -mzarch. Otherwise we are still using the
generic hp-timing.h.
ChangeLog:
* sysdeps/s390/hp-timing.h: New file.
Building glibc for RISC-V with Linux 5.3 kernel headers fails because
<linux/sched.h>, included in vfork.S for CLONE_* constants, contains a
structure definition not safe for inclusion in assembly code.
All other architectures already avoid use of that header in vfork.S,
either defining the CLONE_* constants locally or embedding the
required values directly in the relevant instruction, where they
implement vfork using the clone syscall (see the implementations for
aarch64, ia64, mips and nios2). This patch makes the RISC-V version
define the constants locally like the other architectures.
Tested build for all three RISC-V configurations in
build-many-glibcs.py with Linux 5.3 headers.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Do not include
<linux/sched.h>.
(CLONE_VM): New macro.
(CLONE_VFORK): Likewise.
There is no need to sparc64 provide an arch-specific implementation to
route to POSIX one (which uses gettimeofday). Linux one already handles
the case for architecture that does not have __NR_time.
No semantic changes, checked against a build for sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/sparc/sparc64/time.c: Remove file.
This patch consolidates the mips, mips64, and mips64-n32
INTERNAL_VSYSCALL_CALL on a single implementation.
No semantic changes. I checked against a build for mips-linux-gnu,
mips64-linux-gnu, and mips64-n32-linux-gnu.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Remove.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_VSYSCALL_CALL):
New macro.
This patch simplifies the powerpc internal macros for vDSO calls
by:
- Removing INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, used solely on
get_timebase_freq.
- Adjust INTERNAL_VSYSCALL_CALL_TYPE powerpc32 to follow powerpc64
argument ordering.
- Use HAVE_*_VSYSCALL instead of explicit strings.
- Make powerpc libc-vdso.h include generic implementation.
No semantic change expected, checked on powerpc-linux-gnu-power4,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/libc-vdso.h (VDSO_IFUNC_RET): Define if not
defined.
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
(__get_timebase_freq): Remove use of
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK.
(get_timebase_freq_fallback): New symbol.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (time): Use
HAVE_GETTIMEOFDAY_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/time.c (gettimeofday): Use
HAVE_TIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Include generic
implementation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
(INTERNAL_VSYSCALL_CALL_TYPE): Make calling convention similar to
powerpc64.
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove macro.
* .../sysv/linux/powerpc/powerpc64/sysdep.h
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_GETTIMEOFDAY_VSYSCALL): Define.
Linux vDSO initialization code the internal function pointers require a
lot of duplicated boilerplate over different architectures. This patch
aims to simplify not only the code but the required definition to enable
a vDSO symbol.
The changes are:
1. Consolidate all init-first.c on only one implementation and enable
the symbol based on HAVE_*_VSYSCALL existence.
2. Set the HAVE_*_VSYSCALL to the architecture expected names string.
3. Add a new internal implementation, get_vdso_mangle_symbol, which
returns a mangled function pointer.
Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time
are handled in an arch-independent way, powerpc still uses some
arch-specific vDSO symbol handled in a specific init-first implementation.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu,
mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
sparc64-linux-gnu, and x86_64-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address,
is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/arm/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/mips/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/i386/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported
name.
* sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ,
HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to
invalid names if architecture does not define them.
(get_vdso_mangle_symbol): New symbol.
* sysdeps/unix/sysv/linux/init-first.c: New file.
* sysdeps/unix/sysv/linux/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday,
clock_gettime, clock_getres, getcpu, time): Remove declaration.
(__libc_vdso_platform_setup_arch): Likewise and use
get_vdso_mangle_symbol to setup vDSO symbols.
(sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add
attribute_hidden.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove
definition.
Fix a small error in the HP_TIMING_PRINT trailing zero setting; the '\0'
should be set at MIN(Len,string length), instead of always at the 'Len'
position.
* sysdeps/generic/hp-timing-common.h (HP_TIMING_PRINT): Correct
position of string null termination.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On alpha, Linux kernel 5.1 added the standard getegid, geteuid and
getppid syscalls (commit ecf7e0a4ad15287). Up to now alpha was using
the corresponding OSF1 syscalls through:
- sysdeps/unix/alpha/getegid.S
- sysdeps/unix/alpha/geteuid.S
- sysdeps/unix/alpha/getppid.S
When building against kernel headers >= 5.1, the glibc now use the new
syscalls through sysdeps/unix/sysv/linux/syscalls.list. When it is then
used with an older kernel, the corresponding 3 functions fail.
A quick fix is to move the OSF1 wrappers under the
sysdeps/unix/sysv/linux/alpha directory so they override the standard
linux ones. A better fix would be to try the new syscalls and fallback
to the old OSF1 in case the new ones fail. This can be implemented in
a later commit.
Changelog:
[BZ #24986]
* sysdeps/unix/alpha/getegid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getegid.S: ... here.
* sysdeps/unix/alpha/geteuid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/geteuid.S: ... here.
* sysdeps/unix/alpha/getppid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getppid.S: ... here
Add a macro to linux/kernel-features.h, __ASSUME_TIME64_SYSCALLS, to
indicate whether the kernel can be assumed to provide a set of system
calls that process 64-bit time_t.
__ASSUME_TIME64_SYSCALLS does not indicate whether time_t is actually
64 bits (that's __TIMEBITS) and also does not indicate whether the
64-bit time_t system calls have "time64" suffixes on their names.
Code that uses __ASSUME_TIME64_SYSCALLS will be added in subsequent
patches.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_TIME64_SYSCALLS): New macro.
Reviewed-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
Use the generic C memset/memcpy/memmove in benchtests since comparing
against a slow byte-oriented implementation makes no sense.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-29 Wilco Dijkstra <wdijkstr@arm.com>
* benchtests/bench-memcpy.c (simple_memcpy): Remove.
(generic_memcpy): Include generic C memcpy.
* benchtests/bench-memmove.c (simple_memmove): Remove.
(generic_memmove): Include generic C memmove.
* benchtests/bench-memset.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-large.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-walk.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* string/memcpy.c (MEMCPY): Add defines to enable redirection.
* string/memset.c (MEMSET): Likewise.
* sysdeps/x86_64/memcopy.h: Remove empty file.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function,
unlocks SS and returns to the saved PC.
(__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the
thread stack instead of the saved PC.
Optimizing anonymous maps brings bugs, and does not optimize much anyway.
[BZ #19903]
* sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps
as __vm_allocate.
To be efficient, the remap translator simply returns ports from the underlying
filesystem, and thus the root directory found through browsing '..' is the
underlying root, not the remap root. This should not be a reason for getcwd to
fail.
* sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do
not remove the heading slash if we got an unknown root directory.
(__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is
used when SIGALRM is sent. In addition, The inline version of
hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these
reasons, the preemptor would be skipped by post_signal.
* sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
This patch is a reimplementation of [1], which was submitted back in
2015. Copyright issue has been sorted [2] last year. It proposed a new
section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new
section would be virtually identical to the existing .gnu.hash except
for the translation table (xlat) which would contain correct MIPS
.dynsym indexes corresponding to the hashvals in chains. This is because
MIPS ABI imposes a different ordering of the dynsyms than the one
expected by the .gnu.hash section. Another addition would be a leading
word at the beggining of the section, which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue reported in [3] which is caused
by the leading word of the .MIPS.xhash section. Leading word is now
removed in the corresponding binutils patch, and the number of entries
in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag.
Since the MIPS specific dl-lookup.c file was removed following the
initial patch submission, I opted for the definition of three new macros
in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the
index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is
used to calculate the index of a symbol in GNU hash. On MIPS, it is
defined to look up the symbol index in the translation table.
ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the
.MIPS.xhash pointer in the link_map_machine struct.
The other major change is bumping the highest EI_ABIVERSION value for
MIPS to suggest that the dynamic linker now supports GNU hash.
The patch was tested by running the glibc testsuite for the three MIPS
ABIs (o32, n32 and n64) and for x86_64-linux-gnu.
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
* elf/dl-addr.c (determine_info): Calculate the symbol index
using the newly defined ELF_MACHINE_HASH_SYMIDX macro.
* elf/dl-lookup.c (do_lookup_x): Ditto.
(_dl_setup_hash): Initialize MIPS xhash translation table.
* elf/elf.h (SHT_MIPS_XHASH): New define.
(DT_MIPS_XHASH): New define.
* sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/linkmap.h (struct link_map_machine): New member.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI
version.
* sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
The fix for BZ#18231 requires new symbols only for sh4eb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu.
* sysdeps/sh/preconfigure.ac: New file.
* sysdeps/sh/preconfigure: Regenerate.
* sysdeps/sh/be/sh3/Implies: New file.
* sysdeps/sh/be/sh4/Implies: Likewise.
* sysdeps/sh/le/sh3/Implies: Likewise.
* sysdeps/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/*.abilist: Move to
sysdeps/unix/sysv/linux/sh/le/*.abilist.
* sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for microblaze. This patch
adds the required folder and files for both BE and LE abilist. No semantic
changes are expected.
Checked with check-abi for microblaze-linux-gnueabihf and
microblazeel-linux-gnueabihf.
* sysdeps/microblaze/preconfigure.ac: New file.
* sysdeps/microblaze/preconfigure: Regenerate.
* sysdeps/microblaze/be/implies: New file.
* sysdeps/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to
sysdeps/unix/sysv/linux/microblaze/be/*.abilist.
* sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for armeb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf.
* sysdeps/arm/preconfigure.ac: Set machine based on endianness.
* sysdeps/arm/preconfigure: Regenerate.
* sysdeps/arm/be/Implies: New file.
* sysdeps/arm/be/armv6/Implies: Likewise.
* sysdeps/arm/be/armv6t2/Implies: Likewise.
* sysdeps/arm/be/armv7/Implies: Likewise.
* sysdeps/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/be/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/*.abilist: Move to
sysdeps/unix/sysv/linux/arm/le/*.abilist.
* sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
fegetenv_status() wants to use the lighter weight instruction 'mffsl'
for reading the Floating-Point Status and Control Register (FPSCR).
It currently will use it directly if compiled '-mcpu=power9', and will
perform a runtime check (cpu_supports("arch_3_00")) otherwise.
Nicely, it turns out that the 'mffsl' instruction will decode to
'mffs' on architectures older than "arch_3_00" because the additional
bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset
of 'mffsl'.
So, just generate 'mffsl'.
fesetenv() reads the current value of the Floating-Point Status and Control
Register (FPSCR) to determine the difference between the current state of
exception enables and the newly requested state. All of these bits are also
returned by the lighter weight 'mffsl' instruction used by fegetenv_status().
Use that instead.
Also, remove a local macro _FPU_MASK_ALL in favor of a common macro,
FPU_ENABLES_MASK from fenv_libc.h.
Finally, use a local variable ('new') in favor of a pointer dereference
('*envp').
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and
libc_feresetround_ppc_ctx to bracket a block of code where the floating point
rounding mode must be set to a certain value.
For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs:
1. Read/save FPSCR.
2. Create new value for FPSCR with new rounding mode and enables cleared.
3. If new value is different than current value,
a. If transitioning from a state where some exceptions enabled,
enter "ignore exceptions / non-stop" mode.
b. Write new value to FPSCR.
c. Put a mark on the wall indicating the FPSCR was changed.
(1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl'
instruction can be used, but it doesn't return all of the bits in the FPSCR.
fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be
used instead of fegetenv_register.
(3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must
instead use 'mtfsf 0b00000011' to write just the enables and the mode,
because some of the rest of the bits are not valid if 'mffsl' was used.
fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111'
otherwise.
For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then
calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with
parameters such that it performs:
1. Retreive saved value of FPSCR, saved in prologue above.
2. Read FPSCR.
3. Create new value of FPSCR where:
- Summary bits and exception indicators = current OR saved.
- Rounding mode and enables = saved.
- Status bits = current.
4. If transitioning from some exceptions enabled to none,
enter "ignore exceptions / non-stop" mode.
5. If transitioning from no exceptions enabled to some,
enter "catch exceptions" mode.
6. Write new value to FPSCR.
The summary bits are hardwired to the exception indicators, so there is no
need to restore any saved summary bits.
The exception indicator bits, which are sticky and remain set unless
explicitly cleared, would only need to be restored if the code block
might explicitly clear any of them. This is certainly not expected.
So, the only bits that need to be restored are the enables and the mode.
If it is the case that only those bits are to be restored, there is no need to
read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to
write the bits being restored.
We know we are transitioning out of "ignore exceptions" mode, so step (4) is
unnecessary, and in step (6), we only need to check the state we are
entering.
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the
"mode" (exception enable and rounding mode) bits of the Floating Point Status
Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used
to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be
used to write just those bits back to the FPSCR. The net is better performance.
In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or
they determine that it doesn't need to be written because it is not changing.
In either case, the local variable holds the current values of the enable
bits in the FPSCR. This local variable can be used instead of again reading
the FPSCR.
Also, that value of the FPSCR which is read the second time is validated
against the requested enables. Since the write can't fail, this validation
step is unnecessary, and can be removed. Instead, the exceptions to be
enabled (or disabled) are transformed into available bits in the FPSCR,
then validated after being transformed back, to ensure that all requested
bits are actually being set. For example, FE_INVALID_SQRT can be
requested, but cannot actually be set. This bit is not mapped during the
transformations, so a test for that bit being set before and after
transformations will show the bit would not be set, and the function will
return -1 for failure.
Finally, convert the local macros in fesetmode.c to more generally useful
macros in fenv_libc.h.
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI
as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc.
Within the functions, these bits must be translated to/from the corresponding
enable bits in the Floating Point Status Control Register (FPSCR).
This translation is currently done bit-by-bit. The compiler generates
a series of conditional bit operations. Nicely, the "FE" exception
bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit
operation can instead be performed by a shift with appropriate masking.
Move non-ASCII contributor names from installed headers
into contrib.texi when possible, and when it's not (the
copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h)
go back to ASCIIfied names. Problem reported by Joseph Myers in:
https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI.
New testcase loads the symbol from the GOT with the "lb" instruction
so that the EI_ABIVERSION header field of the shared object is set
to ABSOLUTE (it doesn't actually check the value of the symbol), and
makes sure that the main executable is executed without "ABI version
invalid" error.
Tested for all three ABIs (o32, n32, n64) using both static linker which
handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION
of the test module) and the one that doesn't (EI_ABIVERSION left as 0).
[1] https://sourceware.org/ml/binutils/2018-07/msg00268.html
[BZ #24916]
* sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add
tst-undefined-weak.
[$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib.
[$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency.
* sysdeps/mips/tst-undefined-weak-lib.S: New file.
* sysdeps/mips/tst-undefined-weak.c: Likewise.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION):
Increment highest valid ABIVERSION value.
Linux/Mips kernels prior to 4.8 could potentially crash the user
process when doing FPU emulation while running on non-executable
user stack.
Currently, gcc doesn't emit .note.GNU-stack for mips, but that will
change in the future. To ensure that glibc can be used with such
future gcc, without silently resulting in binaries that might crash
in runtime, this patch forces RWX stack for all built objects if
configured to run against minimum kernel version less than 4.8.
* sysdeps/unix/sysv/linux/mips/Makefile
(test-xfail-check-execstack):
Move under mips-has-gnustack != yes.
(CFLAGS-.o*, ASFLAGS-.o*): New rules.
Apply -Wa,-execstack if mips-force-execstack == yes.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac
(mips-force-execstack): New var.
Set to yes for hard-float builds with minimum_kernel < 4.8.0
or minimum_kernel not set at all.
(mips-has-gnustack): New var.
Use value of libc_cv_as_noexecstack
if mips-force-execstack != yes, otherwise set to no.
As indicated by Joseph's comment on BZ#17726, this symbol is most
likely a historical ABI accident. This patch make it on both arm
and sparc ABIs a compat_symbol.
Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn
sparc64-linux-gnu to see if the symbol is still present.
* gmon/Versions (libc) [GLIBC_2.31]: New entry.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter):
Make a compat_symbol.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h
(__profil_counter_global): Likewise.
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default
for both gmon and debug implementations. This allows simplify
profil-counter.h on Linux to use a single implementation and remove the
requirements for newer ports to redefine __sigaction/sigaction to use
SA_SIGINFO.
The GET_PC macro is also replaced with a function sigcontext_get_pc that
returns an uintptr_t instead of a void pointer. It allows easier convertion
to integer on ILP32 architecture, such as x32, without the need to suppress
compiler warnings.
The patch also requires some refactor of register-dump.h file for some
architectures (to reflect it is now called from a sa_sigaction instead of
sa_handler signal context).
- Alpha, i386, and s390 are straighfoward to take in consideration the
new argument type.
- ia64 takes in consideration the kernel pass a struct sigcontextt
as third argument for sa_sigaction.
- sparc take in consideration the kernel pass a pt_regs struct
as third argument for sa_sigaction.
- m68k dummy function is removed and the FP state is dumped on
register_dump itself.
- For SH the register-dump.h file is consolidate on a common implementation
and the floating-point state is checked based on ownedfp field.
The register_dump does not change its output format in any affected
architecture.
I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
I also checked the libSegFault.so through catchsegv on alpha-linux-gnu,
m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer <fweimer@redhat.com>
* debug/segfault.c (install_handler): Use SA_SIGINFO if defined.
* sysdeps/generic/profil-counter.h (__profil_counter): Cast to
uintptr_t.
* sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to
sigcontext_get_pc and return aligned cast to uintptr_t.
* sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise.
* sysdeps/posix/profil.c (profil_count): Change PC argument to
uintptr_t.
(__profil): Use SA_SIGINFO.
* sysdeps/posix/sprofil.c (profil_count): Change PCP argument to
uintptr_t.
(__sprofil): Use SA_SIGINFO.
* sysdeps/unix/sysv/linux/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter):
Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise.
* sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT,
GET_PC, __sigaction, sigaction): Remove defines.
(sigcontext_get_pc): New function.
* sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump):
Handle CTX argument as ucontext_t.
* sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise.
Likewise.
* sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sh/register-dump.h: New file.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File.
* sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests-internal): Add
tst-sigcontextinfo-get_pc.
* sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file.
(CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
