Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and
multi-arch configurations.
* sysdeps/sparc/sparc32/sparcv9/memmove.S: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/memmove.S: Likewise.
* sysdeps/sparc/sparc64/rtld-memmove.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds support for the ADP (also known as adi) hardware
capability, as reported by the kernel sparc port when running on M7
machines.
Tested in both sparcv9-*-* and sparc64-*-* targets.
* sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined.
* sysdeps/sparc/dl-procinfo.c: Added "adp" to the
_dl_sparc_cap_flags array.
* sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace the simple byte-wise compare in the misaligned case with a
dword compare with page boundary checks in place. For simplicity I've
chosen a 4K page boundary so that we don't have to query the actual
page size on the system.
This results in up to 3x improvement in performance in the unaligned
case on falkor and about 2.5x improvement on mustang as measured using
bench-strcmp.
* sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a
time whenever possible.
A glibc master build with --enable-nss-crypt using the NSS
crypto libraries fails during make check with the following error:
<command-line>:0:0: error: "USE_CRYPT" redefined [-Werror]
<command-line>:0:0: note: this is the location of the previous
definition
This is caused by commit 36975e8e7e
by H.J. Lu which replaces all = with +=. The fix is to undefine
USE_CRYPT before defining it to zero.
Committed as an obvious fix. Fixes the build issue on x86_64 with
no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
Some libio operations fail to correctly free the backup area (created
by _IO_{w}default_pbackfail on unget{w}c) resulting in either invalid
buffer free operations or memory leaks.
For instance, on the example provided by BZ#22415 a following
fputc after a fseek to rewind the stream issues an invalid free on
the buffer. It is because although _IO_file_overflow correctly
(from fputc) correctly calls _IO_free_backup_area, the
_IO_new_file_seekoff (called by fseek) updates the FILE internal
pointers without first free the backup area (resulting in invalid
values in the internal pointers).
The wide version also shows an issue, but instead of accessing invalid
pointers it leaks the backup memory on fseek/fputwc operation.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* libio/Makefile (tests): Add tst-bz22415.
(tst-bz22415-ENV): New rule.
(generated): Add tst-bz22415.mtrace and tst-bz22415.check.
(tests-special): Add tst-bz22415-mem.out.
($(objpfx)tst-bz22415-mem.out): New rule.
* libio/fileops.c (_IO_new_file_seekoff): Call _IO_free_backup_area
in case of a successful seek operation.
* libio/wfileops.c (_IO_wfile_seekoff): Likewise.
(_IO_wfile_overflow): Call _IO_free_wbackup_area in case a write
buffer is required.
* libio/tst-bz22415.c: New test.
When running strace, IPC_64 was set in the command, but ia64 is
an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set
in the kernel, so ipc_parse_version just returns IPC_64 without
clearing the IPC_64 bit in the command.
* sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining
__IPC_64 to 0 to avoid IPC_64 being set.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
These functions set errno and thus the const attribute was wrong.
[BZ #22593]
* math/bits/mathcalls.h (nextafter): Remove const.
(nexttoward): Likewise.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
The same logic used in s_cosf.S version for x86 and powerpc
is used to create a generic s_cosf.c, so there is no performance
improvement in x86_64 and powerpc64.
* sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame
is created as there is no CFI rule for r15. This is also observeable in
GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?)
Therefore this patch is now storing r15 on stack and is using cfi_offset rule.
The stmg/lmg instruction is used to store/load r14 and r15 with one instruction.
On 64bit, the offsets of the fprs have moved to store r15 directly after r14.
On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space
wasn't used.
ChangeLog:
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve):
Store r15 on stack and add cfi rule.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Likewise.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
As per C11 DR#471, ctanh (0 + i NaN) and ctanh (0 + i Inf) should
return 0 + i NaN (with "invalid" exception in the second case but not
the first), not NaN + i NaN. This has corresponding implications for
ctan since its special cases are defined by ctan (z) = -i ctanh (iz).
This patch implements these cases for ctanh and ctan, updating
tests accordingly.
Tested for x86_64.
[BZ #22568]
* math/s_ctan_template.c (M_DECL_FUNC (__ctan)): Set imaginary
part of result to imaginary part of argument if it is zero and the
real part of the argument is not finite.
* math/s_ctanh_template.c (M_DECL_FUNC (__ctanh)): Set real part
of result to real part of argument if it is zero and the imaginary
part of the argument is not finite.
[BZ #22524]
* localedata/Makefile: Add lt_LT.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/lt_LT.UTF-8.in: New file for testing the collation.
* localedata/locales/lt_LT (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
This patch adds support for defining strtof32, wcstof32, strtof32_l
and wcstof32_l functions as aliases of the corresponding float
functions when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strtof.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* stdlib/strtof_l.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32_l): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32_l): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
This patch adds support for defining strfromf32 as an alias of
strfromf when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strfromf.c: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strfromf32): Define
and later undefine as macro and define as weak alias.
This patch adds the header required for testing _Float32 function
aliases, using float ulps. The corresponding makefile support will be
included in the main patch that enables those aliases.
In conjunction with other _Float32 changes, tested for x86_64 and with
build-many-glibcs.py.
* math/test-float32.h: New file.
This patch makes the libm_alias_float macro support creating _Float32
aliases, in preparation for enabling glibc support for that type.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* sysdeps/generic/libm-alias-float.h: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32]
(libm_alias_float_other_r): Create f32 alias.
(libm_alias_float_r): Use semicolon before call to
libm_alias_float_other_r.
This patch corrects three ia64 libm_alias_float_other calls so they
generate the intended _Float32 aliases when such aliases are enabled.
Tested with build-many-glibcs.py for ia64-linux-gnu (that installed
stripped shared libraries are unchanged when applied to current
sources, and that this enables compilation tests to pass when used in
conjunction with other _Float32 patches).
* sysdeps/ia64/fpu/e_exp2f.S (__exp2f): Use exp2 not __exp2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_log2f.S (__log2f): Use log2 not __log2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_powf.S (__powf): Use pow not __pow as second
argument to libm_alias_float_other.
As per C11 DR#471 (adjusted resolution accepted for C17), cacosh (0 +
iNaN) should return NaN +/- i pi/2, not NaN + iNaN.
This patch fixes the code accordingly. The test has hardcoded the
result with positive sign of the imaginary part (with an associated
comment), since the unspecified sign for a result other than 0 or
infinity isn't currently supported by the test infrastructure.
Tested for x86_64.
[BZ #22561]
* math/s_cacosh_template.c (M_DECL_FUNC (__cacosh)): Use pi/2 for
real part of result for argument 0 + i * NaN.
* math/libm-test-cacosh.inc (cacosh_test_data): Update expected
results for tests of 0 + i * NaN.
The ldbl-96 implementation of j1l has some function-local variables
that are declared static for no apparent reason (this dates back to
the first addition of that file).
Any vaguely recent compiler, probably including any that are supported
for building glibc, optimizes away the "static" here, as the values of
the variables on entry to the function are dead. So there is not
actually a user-visible bug here at present (but with any compilers
that didn't optimize away the static at all, possibly building with
less or no optimization, so that the function stored intermediate
values to and then loaded them from the variables, there would have
been a thread-safety issue). But the "static" clearly doesn't belong
there and might potentially make things unsafe were compilation
without optimization to be supported in future, so this patch removes
it.
Tested for x86_64.
* sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local
variables static.
I noticed that an x86_64 build of libm unexpectedly contained more
non-constant data than an older version (before _Float128 support)
did. The problem is non-const arrays in the ldbl-128 j0l and j1l
implementations; this patch makes those arrays, and the corresponding
ldbl-128ibm ones, const.
Tested for x86_64, and tested compilation for powerpc with
build-many-glibcs.py.
* sysdeps/ieee754/ldbl-128/e_j0l.c (Y0_2N): Make const.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
[BZ #22515]
* localedata/Makefile: Add hsb_DE.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/hsb_DE.UTF-8.in: New file for testing the collation.
* localedata/locales/hsb_DE (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
If double, long double and _Float64 all have the same set of values,
TS 18661-3 requires the usual arithmetic conversions on long double
and _Float64 to produce _Float64. For this to be the case when
building with a compiler without a distinct _Float64 type, _Float64
must be a typedef for long double, not for double. (_Float32x,
however, must be double in such a case, not long double, because the
usual arithmetic conversions on _Float32x and double must produce
double.)
This patch adjusts the fallback definition of _Float64 and associated
macros accordingly in that case, to fix the build of test-tgmath3 with
GCC 6 for such a configuration. Tested in conjunction with _Float64
changes with build-many-glibcs.py for arm-linux-gnueabi, to make sure
the issue with test-tgmath3 is fixed. Also tested for x86_64.
* bits/floatn-common.h: Include <bits/long-double.h>.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (__f64): Use suffix 'l'.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (__CFLOAT64): Use _Complex long double.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (_Float64): Use long double.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_huge_valf64): Use __builtin_huge_vall.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_inff64): Use __builtin_infl.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_nanf64): Use __builtin_nanl.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_nansf64): Use __builtin_nansl.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch adds support for defining strtof64, strtof32x, wcstof64,
wcstof32x and the corresponding _l functions as aliases of the
corresponding double functions when _Float64 and _Float32x support is
enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strtod.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
* stdlib/strtod_l.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
This patch avoid an extra floating point to integer conversion in
reduced internal function for generic sinf by defining the sign as
double instead of integers.
There is no much difference on Haswell with GCC 7.2.1:
Before After
min 9.11 9.108
mean 21.982 21.9224
However H.J. Lu reported gains on Skylake:
Before:
"sinf": {
"": {
"duration": 3.4044e+10,
"iterations": 1.9942e+09,
"max": 141.106,
"min": 7.704,
"mean": 17.0715
}
}
After:
"sinf": {
"": {
"duration": 3.40665e+10,
"iterations": 2.03199e+09,
"max": 95.994,
"min": 7.704,
"mean": 16.765
}
}
Checked on x86_64-linux-gnu.
* sysdeps/ieee754/flt-32/s_sinf.c (ones): Define as double.
(reduced): Use ones as double instead of integer.
sinf(NAN) should not signal invalid fp exception
so use isless instead of < where NAN is compared.
this makes the sinf tests pass on aarch64.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Use isless.
This patch adds support for defining strfromf64 and strfromf32x
aliases of strfromd when the corresponding types are enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strfromd.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64] (strfromf64): Define
and later undefine as macro and define as weak alias.
[__HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X] (strfromf32x):
Likewise.
This patch adds the headers required for testing _Float64 and
_Float32x function aliases (using double ulps). The corresponding
makefile support will be included in the patch that actually adds
those aliases; there doesn't seem much point in adding makefile
conditionals for testing something that will be available
unconditionally.
In conjunction with other _Float64 / _Float32x changes, test for
x86_64 and with build-many-glibcs.py.
* math/test-float32x.h: New file.
* math/test-float64.h: Likewise.
This patch makes the libm_alias_double macros support creating
_Float64 and _Float32x aliases, in preparation for enabling glibc
support for those types.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* sysdeps/generic/libm-alias-double.h: Include <bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
(libm_alias_double_r): Use semicolon before call to
libm_alias_double_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Include
<bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
Since s_sinf.c either assigns the return value of floor to integer or
passes double converted from integer to floor, this patch replaces
floor with simple casts.
Also since long == int for 32-bit targets, we can use long instead of
int to avoid 64-bit integer for 64-bit targets.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 130.566 129.564 30%
min 7.704 7.706 0%
mean 21.8188 19.1363 30%
* sysdeps/ieee754/flt-32/s_sinf.c (reduced): Replace long with
int.
(SINF_FUNC): Likewise. Replace floor with simple casts.
[BZ #22517]
* localedata/Makefile: Add et_EE.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/et_EE.UTF-8.in: New file for testing the collation.
* localedata/locales/et_EE (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
Avoid an issue in gcc where some of the vector (aka SIMD) ops will
sometimes end up getting wrongly optimized out. We use these
instructions in many of the string implementations. If/when we
have an upstreamed fix for this problem in gcc we can conditionalize
the use of the extended assembly workaround in glibc.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fmaf.S: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf.c:
Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c:
Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf.c:
Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llroundf.c:
Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf.c:
Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrintf.c:
Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lroundf.c:
Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff.c:
Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c:
Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c:
Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
[BZ #22527]
* localedata/locales/tr_TR (LC_COLLATE): Base collation rules
on iso14651_t1. A test file localedata/tr_TR.UTF-8.in is already
available, this rewrite of the collation rules does reproduce
the test file in the same order.
[BZ #10580]
* localedata/locales/hr_HR (LC_TIME): Use two letters for the
digraphs in the month and day names. Using single code points for
digraphs is deprecated. While there are dedicated Unicode
codepoints, for the digraphs, these are included for backwards
compatibility and modern texts use a sequence of Basic Latin
characters. See: https://www.unicode.org/faq/ligature_digraph.html
This makes the month and day names agree exactly with CLDR now,
CLDR does not use the single code points for the digraphs either.
The new sinf implementation introduced localplt failures for all
platforms where the compiler did not inline the calls to floor
(converted to trunc by machine-independent optimizations). This patch
changes the calls to use __floor as normal in libm.
We can't use the public function names floor / floorf / floorl /
floorf128 in libm code in the absence of appropriate asms to redirect
floor/trunc calls, if not inlined, to use the internal names instead
(while avoiding breaking code building the floor functions themselves)
- while having such asms and then calling the public functions
unconditionally would be desirable for optimization (few architectures
have __floor inlines in math_private.h, and once the built-in function
is used you don't need them), using __floor is the minimum safe fix
for the present test regressions.
Tested with build-many-glibcs.py that this fixes the localplt test
failure for arm-linux-gnueabi.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF_FUNC): Use __floor instead
of floor.
The __GI_* symbol aliases for __memcpy_generic are unnecessary since
they're never used. Add them only for libc.so to avoid PLT. Maybe
some time in future we need to evaluate the relative cost of PLT vs
gains from multiarch memcpy implementations and take a call on whether
to drop this completely.
* sysdeps/aarch64/multiarch/memcpy_generic.S (__GI_memcpy):
Define only for libc.so.
On s390, GDB fails to show the complete backtrace from within vdso functions.
The macro INTERNAL_VSYSCALL_CALL saves the return address in r14 to r10
before branching to the vdso function. The branch-instruction updates r14
in order to let the vdso function return. Then the original address in r14 is
restored from r10. Unfortunately, there are no cfi-rules and GDB fails.
Furthermore the call of the vdso function does not comply with the s390 ABI
as no stack-frame for the vdso-function is generated.
This patch removes the s390 specific macro INTERNAL_VSYSCALL_CALL
and the common implementation in sysdeps/unix/sysv/linux/sysdep-vdso.h is used.
Then the vdso function is called via function-pointer and GCC generates a
new stack-frame and emits all needed cfi-rules.
The defines CLOBBER_[0-6] are removed as they were only used in macro
INTERNAL_VSYSCALL_CALL.
The macro INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is not used on s390.
The only user is power. Thus it is removed from s390 sysdep.h.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(INTERNAL_VSYSCALL_CALL, CLOBBER_0, CLOBBER_1, CLOBBER_2,
CLOBBER_3, CLOBBER_4, CLOBBER_5, CLOBBER_6,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
[BZ libc/19170]
* sysdeps/hppa/crti.S: Declare PREINIT_FUNCTION weak_extern when
PREINIT_FUNCTION_WEAK is nonzero.
(gmon_initializer): New function. Put procedure label for it in
.init_array section.
(_init): Don't call PREINIT_FUNCTION.
* sysdeps/hppa/crtn.S (__gmon_start__): Remove.
* sysdeps/hppa/dl-lookupcfg.h (DL_FIXUP_MAKE_VALUE): Create null fixup
value when map argument is null.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes the remaining double powerpc functions use
libm_alias_double to define function aliases (with consequent removal
of the need for local compat symbol handling). Previous cleanups
avoid this patch changing installed stripped shared libraries for any
build-many-glibcs.py configuration (there are still some functions in
this patch for which the order of double and float aliases changes
within an individual source file, but in this case this doesn't result
in changes to the final library).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint.c:
Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround.c:
Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint.c:
Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround.c:
Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c defines the
lroundl compat symbol, version GLIBC_2_1, twice, once based on llround
and once based on __lround. Those are aliases for each other (llround
weak, __lround strong), but defining it twice does not make sense.
This patch changes it to define the compat symbol once only, matching
how libm_alias_double defines it.
Tested with build-many-glibcs.py for its powerpc64 configurations.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_1)] (lroundl): Do not define
compat symbol based on llround.
Some powerpc logb implementations define a compat symbol for logbl
based on logb, whereas libm_alias_double defines such a compat symbol
based on __logb instead. This difference (logb is weak, __logb isn't)
is enough to result in different installed stripped shared libraries.
The difference in the installed libraries isn't significant, but first
changing the compat_symbol calls helps make it possible to validate a
subsequent change to use libm_alias_double by comparison of libraries,
so this patch does such a preliminary change.
Tested with build-many-glibcs.py for all its hard-float powerpc
configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Define as compat
symbol based on __logb, not on logb.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch various powerpc functions use libm_alias_double to
define function aliases (with consequent removal of the need for local
compat symbol handling). (The present patch excludes the changes to
some functions where such changes could result in differences in
installed stripped shared libraries because of changes to the exact
ordering or properties of symbols in individual .os files.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/power5+/fpu/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c:
Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c:
Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_trunc.c:
Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc fabs and fma use libm_alias_double
to define function aliases. This brings in automatic symbol
versioning compat handling, so the powerpc32 and powerpc64 wrappers
that added such handling to the generic sysdeps/powerpc/fpu versions
are removed as no longer required (there are no sysdeps directory
ordering issues that would necessitate keeping trivial wrappers
there).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/powerpc/fpu/s_fma.S: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_fma.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fma.S: Likewise.
Now that all SPARC ifunc converted to C implementation there is no need
for both C and assembly macros. This patch removes the assembly ones.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (SPARC_ASM_IFUNC_DFLT,
SPARC_ASM_IFUNC1, SPARC_ASM_IFUNC2, SET, SPARC_ASM_VIS2_IFUNC,
SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyintf-generic and
s_nearbyint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.c:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: Remove
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_llrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrintf-generic and s_llrint-generic.
* sysdeps/sparc/sparcv9/fpu/multiarch/s_llrint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_fabs{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_fabsf-generic and s_fabs-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_copysign{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(sysdep_calls): New rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_copysign-generic and s_copysign-generic objects.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an e500 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for its e500 configurations.
* sysdeps/powerpc/powerpc32/e500/nofpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes coldfire libm function implementations use
libm_alias_float to define function aliases.
Untested, given the currently broken state of GCC for coldfire.
* sysdeps/m68k/coldfire/fpu/s_fabsf.c: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/m68k/coldfire/fpu/s_lrintf.c: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/m68k/coldfire/fpu/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes coldfire libm function implementations use
libm_alias_double to define function aliases.
Untested, given the currently broken state of GCC for coldfire.
* sysdeps/m68k/coldfire/fpu/s_fabs.c: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/m68k/coldfire/fpu/s_lrint.c: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/m68k/coldfire/fpu/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
Many m68k libm functions use their own system to share code between
different types and functions, involving defining macros before
including code for another function (for example, s_atan.c also acts
as a template that can define other functions).
Thes files serving as templates generate function aliases directly
with e.g. "weak_alias (__CONCATX(__,FUNC), FUNC)" in s_atan.c. To be
prepared to generate _Float32, _Float64 and _Float32x function
aliases, this needs changing so that the libm_alias_* macros get used
instead. As the macro to use varies depending on the type, that would
mean additional macros to define in several different places to get
the appropriate alias-generation macro used in each case.
Rather than adding to the m68k-specific mechanisms, this patch
converts the functions in question to use something closer to the
math/ type-generic template mechanism. After this patch, these
functions have m68k-specific templates such as s_atan_template.c, but
those templates use all the same macros as in the math/ templates,
such as FLOAT, M_DECL_FUNC, M_SUF and declare_mgen_alias. There is no
automatic generation of the files such as s_atan.c that include the
appropriate math-type-macros-*.h header and the template file (the
existing automatic generation logic is only applicable for the fixed
set of templates listed in math/ - and sysdeps sources always override
files generated that way), so those files are still checked in, but
they are all the obvious two-line files (with one additional
definition in the case of the expm1 implementations), rather than
making e.g. s_atan.c special.
Functions are only converted where they should have aliases for
_FloatN / _FloatNx types. Those m68k functions that do not generate
public names (those that only generate __ieee754_*, with wrappers
generating the public names, and classification functions that only
exist once per format not once per type so don't get aliases) are
unchanged. However, log1p (public names generated by wrapper) and
significand (not provided for new types so no new aliases needed)
needed changing because they previously included the atan
implementations. Now, s_significand.c is the main implementation for
functions with that prototype and using the old implementation
approach, while log1p includes it in place of atan.
Any further cleanups in this area (which preserve the proper set of
functions getting aliases defined by libm_alias_float and
libm_alias_double) are of course welcome, just not needed for the
goals of this patch.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_atan_template.c: New file.
* sysdeps/m68k/m680x0/fpu/s_ceil_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cos_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabs_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floor_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_frexp_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modf_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquo_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sin_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincos_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tan_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanh_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_trunc_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_atan.c: Reimplement to use
s_atan_template.c.
* sysdeps/m68k/m680x0/fpu/s_atanf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_atanl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_ceil.c: Reimplement to use
s_ceil_template.c.
* sysdeps/m68k/m680x0/fpu/s_ceilf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_ceill.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cos.c: Reimplement to use
s_cos_template.c.
* sysdeps/m68k/m680x0/fpu/s_cosf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cosl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1.c: Reimplement to use
s_expm1_template.c.
* sysdeps/m68k/m680x0/fpu/s_expm1f.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1l.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabs.c: Reimplement to use
s_fabs_template.c.
* sysdeps/m68k/m680x0/fpu/s_fabsf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabsl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floor.c: Reimplement to use
s_floor_template.c.
* sysdeps/m68k/m680x0/fpu/s_floorf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floorl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_frexp.c: Reimplement to use
s_frexp_template.c.
* sysdeps/m68k/m680x0/fpu/s_frexpf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrint.c: Reimplement to use
s_lrint_template.c.
* sysdeps/m68k/m680x0/fpu/s_lrintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modf.c: Reimplement to use
s_modf_template.c.
* sysdeps/m68k/m680x0/fpu/s_modff.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modfl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyint.c: Reimplement to use
s_nearbyint_template.c.
* sysdeps/m68k/m680x0/fpu/s_nearbyintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquo.c: Reimplement to use
s_remquo_template.c.
* sysdeps/m68k/m680x0/fpu/s_remquof.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquol.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rint.c: Reimplement to use
s_rint_template.c.
* sysdeps/m68k/m680x0/fpu/s_rintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sin.c: Reimplement to use
s_sin_template.c.
* sysdeps/m68k/m680x0/fpu/s_sinf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sinl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincos.c: Reimplement to use
s_sincos_template.c.
* sysdeps/m68k/m680x0/fpu/s_sincosf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincosl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tan.c: Reimplement to use
s_tan_template.c.
* sysdeps/m68k/m680x0/fpu/s_tanf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanh.c: Reimplement to use
s_tanh_template.c.
* sysdeps/m68k/m680x0/fpu/s_tanhf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanhl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_trunc.c: Reimplement to use
s_trunc_template.c.
* sysdeps/m68k/m680x0/fpu/s_truncf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_truncl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_significand.c: Reimplement based on
s_atan.c instead of including s_atan.c.
* sysdeps/m68k/m680x0/fpu/s_significandf.c: Reimplement based on
s_atanf.c instead of including s_atanf.c.
* sysdeps/m68k/m680x0/fpu/s_significandl.c: Reimplement based on
s_atanl.c instead of including s_atanl.c.
* sysdeps/m68k/m680x0/fpu/s_log1p.c: Include s_significand.c
instead of s_atan.c.
* sysdeps/m68k/m680x0/fpu/s_log1pf.c: Include s_significandf.c
instead of s_atanf.c.
* sysdeps/m68k/m680x0/fpu/s_log1pl.c: Include s_significandl.c
instead of s_atanl.c.
Since this file is no longer checked in, update-copyrights no longer
needs to avoid changing it.
* scripts/update-copyrights: Do not handle intl/plural.c
specially.
There is a subtle non-determinism when building glibc.
This depends on whether the glibc is built using the distibuted
file intl/plural.c or built using the generated file intl/plural.c.
These two files (intl/plural.c generated vs. distributed) are slightly
different, hence we may end up with slightly different libraries.
Originally, having "bison" installed was optional. So if "bison" was
not present, we always built libraries with the distributed plural.c.
If bison was installed, we *** may have *** replaced the distributed
file plural.c with a new plural.c generated from plural.y. if the
timestamps triggered this rule:
plural.c plural.y
$(BISON) $(BISONFLAGS) $@ $^
Given that timestamps are not preserved in GIT repositories, the above
rule is not reliable without explicitly touching plural.c or plural.y.
In other words, the rule may or may not have fired.
In summary: there are two distinct sources of non-determinism:
1. Having "bison" installed or not
2. Having "bison" installed but timestamps poorly defined.
This patch fixes this by requiring "bison" being installed
and by always generating intl/plural.c from intl/plural.y.
(This is achieved by simply removing checked-in intl/plural.c)
[BZ #22432]
* configure.ac (BISON): Require to be present.
* configure: Regenerated.
* intl/Makefile (generated): Add plural.c.
[$(BISON) != no]: Make code unconditional.
(plural.c): Change rule to $(objpfx)plural.c.
($(objpfx)plural.o): Depend on $(objpfx)plural.c.
* intl/plural.c: Remove.
* manual/install.texi (Tools for Compilation): Document bison as
required.
* INSTALL: Regenerated.
Most m68k libm functions share code via sources for one function
including those for another function or type, in a way that will
require significant changes to create function aliases in a way
friendly to adding _FloatN / _FloatNx aliases.
The llrint function implementations, however, use a conventional
separate implementation for each floating-point type. Thus preparing
them for _FloatN / _FloatNx aliases is just a matter of changing them
to include the appropriate headers and use the appropriate macros,
which this patch does. The llrintl changes aren't strictly required,
since m68k long double does not meet the criteria for a _FloatN /
_FloatNx type, but are included anyway to keep consistency between the
implementations for the three types.
Tested with build-many-glibcs.py that installed stripped shared
libraries for m68k-linux-gnu are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/m68k/m680x0/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/m68k/m680x0/fpu/s_llrintl.c: Include
<libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
Some m68k libm functions have their own templates replacing the
generic math/ ones but using the type-generic template machinery.
These currently define function aliases directly using weak_alias. In
preparation for additional _FloatN / _FloatNx function aliases, this
patch changes them to use declare_mgen_alias for creating aliases
instead.
Tested with build-many-glibcs.py that installed stripped shared
libraries for m68k-linux-gnu are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_ccosh_template.c (ccosh): Use
declare_mgen_alias instead of weak_alias.
* sysdeps/m68k/m680x0/fpu/s_cexp_template.c (cexp): Likewise.
* sysdeps/m68k/m680x0/fpu/s_csin_template.c (csin): Likewise.
* sysdeps/m68k/m680x0/fpu/s_csinh_template.c (csinh): Likewise.
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
add_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add add_n-generic.
* sysdeps/sparc/sparc64/multiarch/add_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/add_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
submul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add submul_1-generic.
* sysdeps/sparc/sparc64/multiarch/submul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
addmul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add addmul_1-generic.
* sysdeps/sparc/sparc64/multiarch/addmul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
sub_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add sub_n-generic.
* sysdeps/sparc/sparc64/multiarch/sub_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
mul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add mul_1-generic.
* sysdeps/sparc/sparc64/multiarch/mul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
According to CLDR, collation rules for Serbian and Bosnian
should be the same as for Croatian.
[BZ #22534]
* localedata/Makefile: Add sr_RS.UTF-8 and bs_BA.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/bs_BA.UTF-8.in: New file (same as hr_HR.UTF-8.in).
* localedata/sr_RS.UTF-8.in: New file (same as hr_HR.UTF-8.in).
* localedata/locales/bs_BA (LC_COLLATE): Use “copy "hr_HR"”.
* localedata/locales/sr_RS (LC_COLLATE): Use “copy "hr_HR"”.
[BZ #10580]
* localedata/locales/hr_HR (LC_COLLATE): Base collation rules on
iso14651_t1.
* localedata/locales/hr_HR (LC_TIME): Sync month and day names with
CLDR (except use ligatures for the digraphs, CLDR does not use
the ligatures), add first_workday, some fixes in the date and time
formats.
* localedata/locales/hr_HR (LC_CTYPE): Add transliteration rules
for Đ and đ.
* localedata/locales/hr_HR (LC_MONETARY): Change currency_symbol to
lower case. p_cs_precedes and n_cs_precedes should be 0 instead of 1.
Add int_p_cs_precedes and int_n_cs_precedes.
* localedata/locales/hr_HR (LC_NUMERIC): Change thousands_sep to
"<U202F>" (NARROW NO-BREAK SPACE) and grouping to 3;3 (Agrees with
LC_MONETARY now).
* localedata/locales/hr_HR (LC_TELEPHONE): Add tel_dom_fmt.
* localedata/locales/hr_HR (LC_NAME): Add name_mr, name_mrs, and
name_miss.
* localedata/locales/hr_HR (LC_ADDRESS): Add country_post, country_isbn,
and lang_lib. Change postal_fmt.
change
To support Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) in setjmp/longjmp, we need to save shadow stack
pointer in jmp_buf. The __saved_mask field in jmp_buf has type
of __sigset_t. On Linux, __sigset_t is defined as
#define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
typedef struct
{
unsigned long int __val[_SIGSET_NWORDS];
} __sigset_t;
which is much bigger than expected by the __sigprocmask system call,
which has
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
For Linux/x86, we can shrink __sigset_t used by __saved_mask in jmp_buf
to add paddings for shadow stack pointer. As long as the new __sigset_t
is not smaller than sigset_t expected by the __sigprocmask system call,
it should work correctly.
This patch adds an internal header file, <setjmpP.h>, to define
__jmp_buf_sigset_t for __saved_mask in jmp_buf for Linux/x86 with a
space to store shadow stack pointer. It verifies __jmp_buf_sigset_t has
the suitable size for the __sigprocmask system call. A run-time test,
tst-saved_mask-1.c, is added to verify that size of __jmp_buf_sigset_t
is sufficient. If its size is too small, the test fails with
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, NULL, 0x7fa8aa28effc, 8) = -1 EFAULT (Bad address)
exit_group(1) = ?
Tested with build-many-glibcs.py.
* debug/longjmp_chk.c: Include <setjmpP.h> instead of
<setjmp.h>.
* setjmp/longjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__libc_siglongjmp): Cast &env[0].__saved_mask to "sigset_t *".
* setjmp/sigjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__sigjmp_save): Cast &env[0].__saved_mask to "sigset_t *".
* sysdeps/generic/setjmpP.h: New file.
* sysdeps/unix/sysv/linux/x86/jmp_buf-ssp.sym: Likewise.
* sysdeps/unix/sysv/linux/x86/setjmpP.h: Likewise.
* sysdeps/unix/sysv/linux/x86/tst-saved_mask-1.c: Likewise.
* sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers):
Add jmp_buf-ssp.sym.
(tests): Add tst-saved_mask-1.
When the per-thread cache is enabled, __libc_malloc uses request2size (which
does not perform an overflow check) to calculate the chunk size from the
requested allocation size. This leads to an integer overflow causing malloc
to incorrectly return the last successfully allocated block when called with
a very large size argument (close to SIZE_MAX).
This commit uses checked_request2size instead, removing the overflow.
The sparc32/sparcv9/fpu/multiarch implementations of llrint / llrintf
have aliases lllrint / lllrintf. No such function is exported from or
used in libm and these aliases should not be there; I expect they
arose accidentally in the course of converting a 64-bit implementation
(where lrint and llrint can be aliases) to a 32-bit llrint
implementation. This patch removes those spurious aliases.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S
(__lllrint): Remove alias.
(lllrint): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S
(__lllrintf): Likewise.
(lllrintf): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Include
<libm-alias-float.h>.
(fdimf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_fabsf.c: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_double to define function aliases (with consequent
simplification where compat symbol handling is now done by those
macros rather than locally in architecture-specific code).
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Include
<libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S:
Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_fabs.c: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
The --disable-multi-arch case of sparcv9 libm is missing a fabsl
compat symbol for when long double had the same ABI as double. This
patch adds the missing compat symbol to this implementation. As my
fix for other instances of this missing compat symbol postdates the
last release, I'm considering this as being part of bug 22229 that was
missing from my previous fix rather than as a separate issue, and so
as not needing a new bug report in Bugzilla.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu --disable-multi-arch.
[BZ #22229]
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
While working on SPARC changes to use libm_alias_* I noticed that the
non-multi-arch sparc32/sparcv9/fpu/s_fabs.S was missing compat symbol
support for fabsl. This clearly shows inadequate test coverage, so
this patch adds SPARC --disable-multi-arch builds to
build-many-glibcs.py (the 32-bit one fails testing until that bug is
fixed, the 64-bit one passes testing).
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
SPARC --disable-multi-arch glibc variants.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_float to define function aliases, or libm_alias_float_other
where the main name is defined with versioned_symbol.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_cosf.S: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
[!__ILP32__] (lrintf): Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Include <libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_sinf.S: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/x86_64/x32/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_double to define function aliases.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/s_atan.c: Include
<libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_sin.c: Include
<libm-alias-double.h>.
(sin): Define using libm_alias_double.
(cos): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c: Include
<libm-alias-double.h>.
(tan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
[!__ILP32__] (lrint): Likewise.
* sysdeps/x86_64/x32/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_lrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_lrint-generic and s_lrint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyint-generic and
s_nearbyintf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_finite{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_finitef-generic and s_finite-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_isinf{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add isinff-generic and s_isinf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_isnan{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_isnanf-generic and s_isnan-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_signbit{f}-generic.S).
It also simplifies the multiarch Makefile by moving the common objects
from libm-sysdeps_routines and sysdeps_routines to a new sysdeps_call
rule and including it where required with the correct prefix.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (sparc_libm_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdep_calls): New
rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_signbit-generic and s_signbitf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #17750]
* Makefile: add fr_CA.UTF-8 to test-input and LOCALES.
* localedata/fr_CA.UTF-8.in: New file with test data for backward
accents sorting.
* localedata/fr_FR.UTF-8.in: Fix test data for forward accents
sorting.
* localedata/locales/cs_CZ (LC_COLLATE): Remove “define DIACRIT_FORWARD”
* localedata/locales/de_DE (LC_COLLATE): Likewise.
* localedata/locales/hu_HU (LC_COLLATE): Likewise.
* localedata/locales/lb_LU (LC_COLLATE): Likewise.
* localedata/locales/yuw_PG (LC_COLLATE): Likewise.
* localedata/locales/fr_CA (LC_COLLATE): Add “define DIACRIT_BACKWARD”
* localedata/locales/iso14651_t1_common: Use “ifdef DIACRIT_FORWARD”
instead of “ifdef DIACRIT_BACKWARD”.
The only locale which currently needs backward accents sorting is fr_CA.
Therefore, forward accents sorting should be the default.
Before this patch, backwards accent sorting was the default and all
locales except fr_CA had to use
define DIACRIT_FORWARD
before
copy "iso14651_t1"
Most locales didn’t do that and thus got the inappropriate backwards accents sorting
by accident. Now only the fr_CA locale needs to use
define DIACRIT_BACKWARD
before
copy "iso14651_t1"
Original patch slightly modified by: Mike FABIAN <mfabian@redhat.com>
This patch assumes VIS3 support by binutils, which is supported since
version 2.22. This leads to some code simplification, mostly on
multiarch build where there is only one variant instead of previously
two (whether binutils supports VIS3 instructions or not).
For multiarch files where HAVE_AS_VIS3_SUPPORT was checked and
the default implementation was built with a different name, a new
file with (implementation with -generic appended) is added.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* config.h.in (HAVE_AS_VIS3_SUPPORT): Remove check for VIS3 support.
* sysdeps/sparc/configure.ac (HAVE_AS_VIS3_SUPPORT): Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h [!HAVE_AS_VIS3_SUPPORT]
(SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
* sysdeps/sparc/sparc32/sparcv9/Makefile [$(have-as-vis3) != yes]
(ASFLAGS.o, ASFLAGS-.os, ASFLAGS-.op, ASFLAGS-.oS): Remove rules.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
($(have-as-vis3) == yes): Remove conditional.
* sysdeps/sparc/sparc64/Makefile (($(have-as-vis3) == yes)):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf-generic.c: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-generic.c: New file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/hppa/start.S (_start): Check PIC instead of SHARED. Load
address of $global$ into %dp register earlier. Use pc-relative
instruction sequence for PIC case.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_float (or libm_alias_float_other in cases where the main
symbol name is defined with versioned_symbol) to define function
aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>.
(asinhf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>.
(atanf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>.
(cbrtf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>.
(expm1f): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>.
(frexpf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>.
(remquof): Define using libm_alias_float.
* sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(expf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(log2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(logf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(powf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include
<libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/i686/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>.
(asinh): Define using libm_alias_double.
* sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>.
(cbrt): Define using libm_alias_double.
* sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>.
(expm1): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>.
(frexp): Define using libm_alias_double.
* sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>.
(remquo): Define using libm_alias_double.
* sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
A note header has 3 4-bytes fields, followed by note name and note
descriptor. According to gABI, in a note entry, the note name field,
not note name size, is padded for the note descriptor. And the note
descriptor field, not note descriptor size, is padded for the next
note entry. Notes are aligned to 4 bytes in 32-bit objects and 8 bytes
in 64-bit objects.
For all GNU notes, the name is "GNU" which is 4 bytes. They have the
same format in the first 16 bytes in both 32-bit and 64-bit objects.
They differ by note descriptor size and note type. So far, .note.ABI-tag
and .note.gnu.build-id notes are always aligned to 4 bytes. The exsting
codes compute the note size by aligning the note name size and note
descriptor size to 4 bytes. It happens to produce the same value as
the actual note size by luck since the name size is 4 and offset of the
note descriptor is 16. But it will produce the wrong size when note
alignment is 8 bytes in 64-bit objects.
This patch defines ELF_NOTE_DESC_OFFSET and ELF_NOTE_NEXT_OFFSET to
properly compute offsets of note descriptor and next note. It uses
alignment of PT_NOTE segment to support both 4-byte and 8-byte note
alignments in 64-bit objects. To handle PT_NOTE segments with
incorrect alignment, which may lead to an infinite loop, if segment
alignment is less than 4, we treate alignment as 4 bytes since some
note segments have 0 or 1 byte alignment.
[BZ #22370]
* elf/dl-hwcaps.c (ROUND): Removed.
(_dl_important_hwcaps): Replace ROUND with ELF_NOTE_DESC_OFFSET
and ELF_NOTE_NEXT_OFFSET.
* elf/dl-load.c (ROUND): Removed.
(open_verify): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* elf/readelflib.c (ROUND): Removed.
(process_elf_file): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* include/elf.h [!_ISOMAC]: Include <libc-pointer-arith.h>.
[!_ISOMAC] (ELF_NOTE_DESC_OFFSET): New.
[!_ISOMAC] (ELF_NOTE_NEXT_OFFSET): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an s390 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fmaf.c: Include <libm-alias-float.h>.
[!__fmaf] (fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes s390 libm function implementations use
libm_alias_double to define function aliases. This allows
sysdeps/unix/sysv/linux/s390/fpu/s_fma.c to be removed, as
libm_alias_double handles symbol versioning for long double compat
symbols.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/unix/sysv/linux/s390/fpu/s_fma.c: Remove.
The LOCALES variable in the localedata had two instances of cs_CZ
which generated the following warning:
../gen-locales.mk:11: target '/opt/build/localedata/cs_CZ.UTF-8/LC_CTYPE' given more than once in the same rule
Dropped the duplicate entry.
This patch adds BENCHSET variable to benchtests/Makefile in order to
provide the capability to run a list of subsets of benchmark tests, ie;
make bench BENCHSET="bench-pthread bench-math malloc-thread"
This helps users to benchmark specific glibc area
ChangeLog:
* benchtests/Makefile:Add BENCHSET to allow subsets of
benchmarks to be run.
* benchtests/README: Add documentation for: Running subsets of
benchmarks.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
When executing bench-math the benchmark output is invalid with this
error msg:
Invalid benchmark output: 'workload-spec2006.wrf' does not match any of
the regexes: '^[_a-zA-Z0-9]*$¹ or Invalid benchmark output: Additional
properties are not allowed ('workload-spec2006.wrf' was unexpected)
The error was seen when running the test:
workload-spec2006.wrf, 'stack=1024,guard=1' and 'stack=1024,guard=2'.
The problem is that the current regex's do not accept the hyphen, dot, equal
and comma in the output.
This patch changes the regex in benchout.schema.json to accept symbols in
benchmark tests names.
ChangeLog:
* benchtests/scripts/benchout.schema.json: Fix regex to accept a
wider range of tests names.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
Benchmark workload-spec2006.wrf does not produce max, min or mean
results but instead produce throughput. This is represented in
benchtests/bench-skeleton.c. This patch adjust benchout.schema.json to consider
bench.out from bench-math benchmarks as valid
ChangeLog:
* benchtests/scripts/benchout.schema.json: Add throughput as accepted
result from property and remove "max", min" and "mean" from required
properties based on benchtests/bench-skeleton.c.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
These tests need a working Internet connection with DNS.
We have additional coverage of getaddrinfo through the resolv tests, so
the loss of default test coverage seems acceptable.
This patch refactor the SPARC64 ifunc selector to a C implementation.
The x86_64 implementation is used as default, which resulted in common
definitions (ifunc-init.h) used on both architectures. No functional
change is expected, including ifunc resolution rules.
Checked on sparc64-linux-gnu, sparcv9-linux-gnu and x86_64-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-ultra1.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h (sparc_libc_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
[$(subdir) = string] (sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_float macros to define function aliases. In the case of
the ABI compatibility for complex functions, libm_alias_float_other is
used, with the cfloat_versions macro adjusted to take a function name
argument without the trailing 'f' to facilitate this, and
cfloat_versions dealing with calling libm_alias_float_other (except
for clog10f, which doesn't use that macro because of the complexity
associated with __clog10f also being exported).
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/cfloat-compat.h: Include <libm-alias-float.h>.
(cfloat_versions): Take function argument without trailing 'f'.
Call libm_alias_float_other.
* sysdeps/alpha/fpu/cabsf.c: Update call to cfloat_versions.
* sysdeps/alpha/fpu/cargf.c: Likewise.
* sysdeps/alpha/fpu/cimagf.c: Likewise.
* sysdeps/alpha/fpu/conjf.c: Likewise.
* sysdeps/alpha/fpu/crealf.c: Likewise.
* sysdeps/alpha/fpu/s_cacosf.c: Likewise.
* sysdeps/alpha/fpu/s_cacoshf.c: Likewise.
* sysdeps/alpha/fpu/s_casinf.c: Likewise.
* sysdeps/alpha/fpu/s_casinhf.c: Likewise.
* sysdeps/alpha/fpu/s_catanf.c: Likewise.
* sysdeps/alpha/fpu/s_catanhf.c: Likewise.
* sysdeps/alpha/fpu/s_ccosf.c: Likewise.
* sysdeps/alpha/fpu/s_ccoshf.c: Likewise.
* sysdeps/alpha/fpu/s_cexpf.c: Likewise.
* sysdeps/alpha/fpu/s_clogf.c: Likewise.
* sysdeps/alpha/fpu/s_cpowf.c: Likewise.
* sysdeps/alpha/fpu/s_cprojf.c: Likewise.
* sysdeps/alpha/fpu/s_csinf.c: Likewise.
* sysdeps/alpha/fpu/s_csinhf.c: Likewise.
* sysdeps/alpha/fpu/s_csqrtf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanhf.c: Likewise.
* sysdeps/alpha/fpu/s_clog10f.c: Include <libm-alias-float.h>.
(clog10f): Use libm_alias_float_other.
* sysdeps/alpha/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_copysignf.c: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/alpha/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
(llroundf): Likewise.
* sysdeps/alpha/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaf.c: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaxf.c: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fminf.c: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llrintf.c: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llroundf.c: Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_roundf.c: Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_double to define function aliases. This also simplifies
the code because the compatibility for long double = double is handled
by libm_alias_double instead of locally in each source file.
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_copysign.c: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/alpha/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
(llround): Likewise.
* sysdeps/alpha/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch makes the ldbl-opt libm_alias_double implementation support
use from .S sources, by adding a semicolon after its use of
weak_alias.
Tested (compilation only) with build-many-glibcs.py for
alpha-linux-gnu, in conjunction with a patch introducing uses of
libm_alias_double in alpha .S files.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
(libm_alias_double_r): Add semicolon after weak_alias call.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmax.c: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmin.c: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llrint.c: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llround.c: Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_nearbyint.c: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_round.c: Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Combine the four places where link maps are sorted into a single function.
This also moves the logic to skip the first map (representing the main
binary) to the callers.
This patch uses libm_alias_float128 in place of weak_alias more in
sysdeps/ieee754/float128, in preparation for defining _Float64x
aliases when appropriate.
Tested for x86_64, and for powerpc64le (compilation only) with
build-many-glibcs.py in conjunction with _Float64x support patches.
* sysdeps/ieee754/float128/s_fromfpf128.c (fromfpf128): Define
using libm_alias_float128.
* sysdeps/ieee754/float128/s_fromfpxf128.c (fromfpxf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadf128.c (setpayloadf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c
(setpayloadsigf128): Likewise.
* sysdeps/ieee754/float128/s_ufromfpf128.c (ufromfpf128):
Likewise.
* sysdeps/ieee754/float128/s_ufromfpxf128.c (ufromfpxf128):
Likewise.
Supporting _Float64x on powerpc64le means that tests of that type need
to use -mfloat128 just like tests of _Float128. This patch adds the
necessary uses of that option.
Tested (compilation only) for powerpc64le with build-many-glibcs.py,
in conjunction with _Float64x support patches.
* sysdeps/powerpc/powerpc64le/Makefile ($(foreach
suf,$(all-object-suffixes),$(objpfx)test-float64x%$(suf))): Add
-mfloat128 to CFLAGS.
($(foreach
suf,$(all-object-suffixes),$(objpfx)test-ifloat64x%$(suf))):
Likewise.
(CFLAGS-libm-test-support-float64x.c): New variable.
($(objpfx)test-float64x% $(objpfx)test-ifloat64x%): Add
$(f128-loader-link) to gnulib-tests.
This patch adds support for libm_alias_ldouble and libm_alias_float128
to create *f64x function aliases when appropriate.
Making such aliases work for functions defined in assembly sources
requires adding some semicolons after weak_alias calls in alias macro
definitions. For C, semicolons are already present in the macros
called when required, but a GNU C extension allows excess semicolons
at file scope in a source file (and glibc already uses this), so it is
OK to have extra semicolons present in the macro definitions. For
assembly sources, making multiple alias macro calls from a single
macro expansion means there are no newlines between the calls, so an
explicit separator is needed. If hppa were to have .S sources in
libm, a more complicated approach would be needed that used
ASM_LINE_SEP when building assembly sources but not for C, but right
now there are no such sources so just using a semicolon (as already
present unconditionally in some such macro expansions) suffices.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/libm-alias-float128.h: Include <bits/floatn.h>.
(libm_alias_float128_other_r): If
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE], define f64x
alias.
(libm_alias_float128_r): Add semicolon after weak_alias call.
* sysdeps/generic/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
(libm_alias_ldouble_r): Add semicolon after weak_alias call.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
This patch adds support for defining strfromf64x as a function alias
(of strfroml or strfromf128, as appropriate) when _Float64x is
supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strfroml.c: Always include <stdlib.h>.
[__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x): Define and later
undefine as macro and define as weak alias.
* sysdeps/ieee754/float128/strfromf128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE]: Include
<stdlib.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x):
Define and later undefine as macro and define as weak alias.
This patch adds support for defining strtof64x, strtof64x_l, wcstof64
and wcstof64x_l function aliases when _Float64x is supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strtold.c [__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128_l.c
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-96/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
This patch adds support for testing _Float64x libm functions. A
configuration with such functions sets float64x-alias-fcts = yes in a
sysdeps Makeconfig file; until such settings are added, this test
support is inactive.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* math/test-float64x.h: New file.
* math/Makefile (type-float64x-yes): New variable.
(test-types): Add $(type-float64x-$(float64x-alias-fcts)).
math_private.h uses __MATH_TG in defining the min_of_type macro used
within libm, with min_of_type_<suffix> macros for each type. This
runs into problems with __MATH_TG expansions used with additional
_FloatN and _FloatNx type support, because those can end up
macro-expanding the FUNC argument to __MATH_TG before it gets
concatenated with a suffix - meaning that min_of_type_ can't
simultaneously be the macro name for double, and a prefix to other
macro names, since the latter case requires such premature macro
expansion not to occur. (This is not a problem for the uses of
__MATH_TG in installed headers because FUNC there is a function name
in the implementation namespace, and the suffixes themselves don't get
macro-expanded.)
This patch fixes the problem by making min_of_type_<suffix> macros
function-like, so no macro expansion occurs when min_of_type_ is
expanded on its own as a macro argument, only later when followed by
() after expansion.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/math_private.h (min_of_type_f): Make into a
function-like macro.
(min_of_type_): Likewise.
(min_of_type_l): Likewise.
(min_of_type_f128): Likewise.
(min_of_type): Pass () as last argument of __MATH_TG.
The tst-strtod-round-skeleton.c conditionals relating to handling of
_Float64x require associated <float.h> macros, which requires
__STDC_WANT_IEC_60559_TYPES_EXT__ to be defined before <float.h> is
included if _Float64x is supported. This patch adds the necessary
definition.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* stdlib/tst-strtod-round-skeleton.c
(__STDC_WANT_IEC_60559_TYPES_EXT__): Define before including
headers.
math/gen-tgmath-tests.py was missing a create_type argument when
creating the internal types for combinations of long double with
_Float64 and _Float64x, so resulting in output that did not compile
when glibc support for those types was enabled. This patch adds the
missing argument so that the tests properly compile in that case.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* math/gen-tgmath-tests.py (Type.init_types): Pass suffix argument
for combinations of long double with _Float64 and _Float64x.
