All references to libraries in the manual are without the .so prefix,
so do the same for libc_malloc_debug.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
These functions call the core allocator functions (realloc and malloc
respectively) and are hence guaranteed to allocate memory using the
correct functions when multiple allocators are interposed. Having
these functions interposed in one allocator and not another may result
in confusion, hence discourage interposing them altogether.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes
<bits/platform/x86.h>.
2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the
processor has the feature.
3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the
feature is active. There may be other preconditions, like sufficient
stack space or further setup for AMX, which must be satisfied before the
feature can be used.
This fixes BZ #27958.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Make malloc hooks symbols compat-only so that new applications cannot
link against them and remove the declarations from the API. Also
remove the unused malloc-hooks.h.
Finally, mark all symbols in libc_malloc_debug.so as compat so that
the library cannot be linked against.
Add a note about the deprecation in NEWS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The SSBD feature is implemented in 2 different ways on AMD processors:
newer systems (Zen3) provides AMD_SSBD (function 8000_0008, EBX[24]),
while older system provides AMD_VIRT_SSBD (function 8000_0008, EBX[25]).
However for AMD_VIRT_SSBD, kernel shows both 'ssdb' and 'virt_ssdb' on
/proc/cpuinfo; while for AMD_SSBD only 'ssdb' is provided.
This now check is AMD_SSBD is set to check for 'ssbd', otherwise check
if AMD_VIRT_SSDB is set to check for 'virt_ssbd'.
Checked on x86_64-linux-gnu on a Ryzen 9 5900x.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] 5238e95759/src/basic/fd-util.c (L217)
[2] ddf4b77e11/src/lxc/start.c (L236)
[3] 9e4f2f3a6b/Modules/_posixsubprocess.c (L220)
[4] 5f47c0613e/src/libstd/sys/unix/process2.rs (L303-L308)
[5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
It was added on Linux 5.9 (278a5fbaed89) with CLOSE_RANGE_CLOEXEC
added on 5.11 (582f1fb6b721f). Although FreeBSD has added the same
syscall, this only adds the symbol on Linux ports. This syscall is
required to provided a fail-safe way to implement the closefrom
symbol (BZ #10353).
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
The tunable will not work with *any* non-zero tunable value since its
list of allowed values is 0-3. Fix the documentation to reflect that.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
From
https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html
* Intel TSX will be disabled by default.
* The processor will force abort all Restricted Transactional Memory (RTM)
transactions by default.
* A new CPUID bit CPUID.07H.0H.EDX[11](RTM_ALWAYS_ABORT) will be enumerated,
which is set to indicate to updated software that the loaded microcode is
forcing RTM abort.
* On processors that enumerate support for RTM, the CPUID enumeration bits
for Intel TSX (CPUID.07H.0H.EBX[11] and CPUID.07H.0H.EBX[4]) continue to
be set by default after microcode update.
* Workloads that were benefited from Intel TSX might experience a change
in performance.
* System software may use a new bit in Model-Specific Register (MSR) 0x10F
TSX_FORCE_ABORT[TSX_CPUID_CLEAR] functionality to clear the Hardware Lock
Elision (HLE) and RTM bits to indicate to software that Intel TSX is
disabled.
1. Add RTM_ALWAYS_ABORT to CPUID features.
2. Set RTM usable only if RTM_ALWAYS_ABORT isn't set. This skips the
string/tst-memchr-rtm etc. testcases on the affected processors, which
always fail after a microcde update.
3. Check RTM feature, instead of usability, against /proc/cpuinfo.
This fixes BZ #28033.
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
[1] https://austingroupbugs.net/view.php?id=62
The valgrind/helgrind test suite needs a way to make stack dealloction
more prompt, and this feature seems to be generally useful.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
AMD define different flags for IRPB, IBRS, and STIPBP [1], so new
x86_64_cpu are added and IBRS_IBPB is only tested for Intel.
The SSDB is also defined and implemented different on AMD [2],
and also a new AMD_SSDB flag is added. It should map to the
cpuinfo 'ssdb' on recent AMD cpus.
It fixes tst-cpu-features-cpuinfo and tst-cpu-features-cpuinfo-static
on recent AMD cpus.
Checked on x86_64-linux-gnu on AMD Ryzen 9 5900X.
[1] https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf
[2] https://bugzilla.kernel.org/show_bug.cgi?id=199889
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Now that thread cancellation state is not accessed concurrently anymore,
it is possible to move it out the 'cancelhandling'.
The code is also simplified: CANCELLATION_P is replaced with a
internal pthread_testcancel call and the CANCELSTATE_BIT{MASK} is
removed.
With this behavior pthread_setcancelstate does not require to act on
cancellation if cancel type is asynchronous (is already handled either
by pthread_setcanceltype or by the signal handler).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
ISO C2X has made some changes to the handling of feature test macros
related to features from the floating-point TSes, and to exactly what
such features are present in what headers, that require corresponding
changes in glibc.
* For the few features that were controlled by
__STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in
C2X, there is now instead a new feature test macro
__STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP.
This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I
implemented support for the new feature test macro for GCC 11) and
the totalorder and payload functions in <math.h>. C2X no longer
says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's
appropriate for that macro to continue to enable exactly the
features from TS 18661-1).
* The SNAN macros for each floating-point type have moved to <float.h>
(and been renamed in the process). Thus, the copies in <math.h>
should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for
C2X.
* The fmaxmag and fminmag functions have been removed (replaced by new
functions for the new min/max operations in IEEE 754-2019). Thus
those should also only be declared for
__STDC_WANT_IEC_60559_BFP_EXT__.
* The _FloatN / _FloatNx handling for the last two points in glibc is
trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X
(the integration of TS 18661-3 as an Annex, that is, which hasn't
yet been merged into the C standard git repository but has been
accepted by WG14), so C2X with that macro should not declare some
things that are declared for older standards with that macro. The
approach taken here is to provide the declarations (when
__STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined
__USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled
then those declarations (that are only in TS 18661-3 and not in C2X)
will only be provided if _GNU_SOURCE is defined as well. Thus
_GNU_SOURCE remains a superset of the TS features as well as of C2X.
Some other somewhat related changes in C2X are not addressed here.
There's an open proposal not to include the fmin and fmax functions
for the _FloatN / _FloatNx types, given the new min/max operations,
which could be handled like the previous point if adopted. And the
fromfp functions have been changed to return a result in floating type
rather than intmax_t / uintmax_t; my inclination there is to treat
that like that change of totalorder type (new symbol versions etc. for
the ABI change; old versions become compat symbols and are no longer
supported as an API).
Tested for x86_64 and x86.
This patch optimizes the performance of memcpy/memmove for A64FX [1]
which implements ARMv8-A SVE and has L1 64KB cache per core and L2 8MB
cache per NUMA node.
The performance optimization makes use of Scalable Vector Register
with several techniques such as loop unrolling, memory access
alignment, cache zero fill, and software pipelining.
SVE assembler code for memcpy/memmove is implemented as Vector Length
Agnostic code so theoretically it can be run on any SOC which supports
ARMv8-A SVE standard.
We confirmed that all testcases have been passed by running 'make
check' and 'make xcheck' not only on A64FX but also on ThunderX2.
And also we confirmed that the SVE 512 bit vector register performance
is roughly 4 times better than Advanced SIMD 128 bit register and 8
times better than scalar 64 bit register by running 'make bench'.
[1] https://github.com/fujitsu/A64FX
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reviewed-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
This patch is a test helper script to change Vector Length for child
process. This script can be used as test-wrapper for 'make check'.
Usage examples:
~/build$ make check subdirs=string \
test-wrapper='~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 16'
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 16 \
make test t=string/test-memcpy
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 32 \
./debugglibc.sh string/test-memmove
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 64 \
./testrun.sh string/test-memset
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cover key corner cases (e.g., whether errno is set) that are well
settled in glibc, fix some examples to avoid integer overflow, and
update some other dated examples (code needed for K&R C, e.g.).
* manual/charset.texi (Non-reentrant String Conversion):
* manual/filesys.texi (Symbolic Links):
* manual/memory.texi (Allocating Cleared Space):
* manual/socket.texi (Host Names):
* manual/string.texi (Concatenating Strings):
* manual/users.texi (Setting Groups):
Use reallocarray instead of realloc, to avoid integer overflow issues.
* manual/filesys.texi (Scanning Directory Content):
* manual/memory.texi (The GNU Allocator, Hooks for Malloc):
* manual/tunables.texi:
Use code font for 'malloc' instead of roman font.
(Symbolic Links): Don't assume readlink return value fits in 'int'.
* manual/memory.texi (Memory Allocation and C, Basic Allocation)
(Malloc Examples, Alloca Example):
* manual/stdio.texi (Formatted Output Functions):
* manual/string.texi (Concatenating Strings, Collation Functions):
Omit pointer casts that are needed only in ancient K&R C.
* manual/memory.texi (Basic Allocation):
Say that malloc sets errno on failure.
Say "convert" rather than "cast", since casts are no longer needed.
* manual/memory.texi (Basic Allocation):
* manual/string.texi (Concatenating Strings):
In examples, use C99 declarations after statements for brevity.
* manual/memory.texi (Malloc Examples): Add portability notes for
malloc (0), errno setting, and PTRDIFF_MAX.
(Changing Block Size): Say that realloc (p, 0) acts like
(p ? (free (p), NULL) : malloc (0)).
Add xreallocarray example, since other examples can use it.
Add portability notes for realloc (0, 0), realloc (p, 0),
PTRDIFF_MAX, and improve notes for reallocating to the same size.
(Allocating Cleared Space): Reword now-confusing discussion
about replacement, and xref "Replacing malloc".
* manual/stdio.texi (Formatted Output Functions):
Don't assume message size fits in 'int'.
* manual/string.texi (Concatenating Strings):
Fix undefined behavior involving arithmetic on a freed pointer.
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
This code adds new flag - '--allow-time-setting' to cross-test-ssh.sh
script to indicate if it is allowed to alter the date on the system
on which tests are executed. This change is supposed to be used with
test systems, which use virtual machines for testing.
The GLIBC_TEST_ALLOW_TIME_SETTING env variable is exported to the
remote environment on which the eligible test is run and brings no
functional change when it is not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The TUNABLE_SET interface took a primitive C type argument, which
resulted in inconsistent type conversions internally due to incorrect
dereferencing of types, especialy on 32-bit architectures. This
change simplifies the TUNABLE setting logic along with the interfaces.
Now all numeric tunable values are stored as signed numbers in
tunable_num_t, which is intmax_t. All calls to set tunables cast the
input value to its primitive type and then to tunable_num_t for
storage. This relies on gcc-specific (although I suspect other
compilers woul also do the same) unsigned to signed integer conversion
semantics, i.e. the bit pattern is conserved. The reverse conversion
is guaranteed by the standard.
1. Add CPUID_INDEX_14_ECX_0 for CPUID leaf 0x14 to detect PTWRITE feature
in EBX of CPUID leaf 0x14 with ECX == 0.
2. Add PTWRITE detection to CPU feature tests.
3. Add 2 static CPU feature tests.
The struct tag is actually entry (not ENTRY). The data member has
type void *, and it can point to binary data. Only the key member is
required to be a null-terminated string.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
Most packages have been tested with their latest releases, except for
Python, whose latest version is 3.9.1.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In <sys/platform/x86.h>, define CPU features as enum instead of using
the C preprocessor magic to make it easier to wrap this functionality
in other languages. Move the C preprocessor magic to internal header
for better GCC codegen when more than one features are checked in a
single expression as in x86-64 dl-hwcaps-subdirs.c.
1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX.
2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h.
3. Remove struct cpu_features and __x86_get_cpu_features from
<sys/platform/x86.h>.
4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it
in libc.
5. Make __get_cpu_features() private to glibc.
6. Replace __x86_get_cpu_features(N) with __get_cpu_features().
7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE.
8. Use a single enum index for each CPU feature detection.
9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf.
10. Return zero struct cpuid_feature for the older glibc binary with a
smaller CPUID_INDEX_MAX [BZ #27104].
11. Inside glibc, use the C preprocessor magic so that cpu_features data
can be loaded just once leading to more compact code for glibc.
256 bits are used for each CPUID leaf. Some leaves only contain a few
features. We can add exceptions to such leaves. But it will increase
code sizes and it is harder to provide backward/forward compatibilities
when new features are added to such leaves in the future.
When new leaves are added, _rtld_global_ro offsets will change which
leads to race condition during in-place updates. We may avoid in-place
updates by
1. Rename the old glibc.
2. Install the new glibc.
3. Remove the old glibc.
NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy
relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size
-----------------------------
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
void *copy_obj (const void *src, size_t alloc, size_t copysize)
{
void *obj = malloc (alloc);
memcpy (obj, src, copysize);
return obj;
}
Limitations
-----------
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
In the next release of POSIX, free must preserve errno
<https://www.austingroupbugs.net/view.php?id=385>.
Modify __libc_free to save and restore errno, so that
any internal munmap etc. syscalls do not disturb the caller's errno.
Add a test malloc/tst-free-errno.c (almost all by Bruno Haible),
and document that free preserves errno.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add Intel Linear Address Masking (LAM) support to <sys/platform/x86.h>.
HAS_CPU_FEATURE (LAM) can be used to detect if LAM is enabled in CPU.
LAM modifies the checking that is applied to 64-bit linear addresses,
allowing software to use of the untranslated address bits for metadata.
Add a new glibc tunable: mem.tagging. This is a decimal constant in
the range 0-255 but used as a bit-field.
Bit 0 enables use of tagged memory in the malloc family of functions.
Bit 1 enables precise faulting of tag failure on platforms where this
can be controlled.
Other bits are currently unused, but if set will cause memory tag
checking for the current process to be enabled in the kernel.
This patch adds the configuration machinery to allow memory tagging to be
enabled from the command line via the configure option --enable-memory-tagging.
The current default is off, though in time we may change that once the API
is more stable.
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
The align the GNU extension with the others one that accept specify
which clock to wait for (such as pthread_mutex_clocklock).
Check on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The SXID_* tunable properties only influence processes that are
AT_SECURE, so make that a bit more explicit in the documentation and
comment.
Revisiting the code after a few years I managed to confuse myself, so
I imagine there could be others who may have incorrectly assumed like
I did that the SXID_ERASE tunables are not inherited by children of
non-AT_SECURE processes.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
In the Spanish language, the digraph "ll" has not been considered a
separate letter since 1994:
https://www.rae.es/consultas/exclusion-de-ch-y-ll-del-abecedario
Since January 1998 (commit 49891c1062),
glibc's locale data no longer specifies "ch" and "ll" as separate
collation elements. So, it's better to not use "ll" in an example.
Also, the Czech "ch" is a better example as it collates in a more
surprising place.
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some tunable values and their minimum/maximum values must be determinted
at run-time. Add TUNABLE_SET_WITH_BOUNDS and TUNABLE_SET_WITH_BOUNDS_FULL
to update tunable value together with minimum and maximum values.
__tunable_set_val is updated to set tunable value as well as min/max
values.
The __x86_shared_non_temporal_threshold determines when memcpy on x86
uses non_temporal stores to avoid pushing other data out of the last
level cache.
This patch proposes to revert the calculation change made by H.J. Lu's
patch of June 2, 2017.
H.J. Lu's patch selected a threshold suitable for a single thread
getting maximum performance. It was tuned using the single threaded
large memcpy micro benchmark on an 8 core processor. The last change
changes the threshold from using 3/4 of one thread's share of the
cache to using 3/4 of the entire cache of a multi-threaded system
before switching to non-temporal stores. Multi-threaded systems with
more than a few threads are server-class and typically have many
active threads. If one thread consumes 3/4 of the available cache for
all threads, it will cause other active threads to have data removed
from the cache. Two examples show the range of the effect. John
McCalpin's widely parallel Stream benchmark, which runs in parallel
and fetches data sequentially, saw a 20% slowdown with this patch on
an internal system test of 128 threads. This regression was discovered
when comparing OL8 performance to OL7. An example that compares
normal stores to non-temporal stores may be found at
https://vgatherps.github.io/2018-09-02-nontemporal/. A simple test
shows performance loss of 400 to 500% due to a failure to use
nontemporal stores. These performance losses are most likely to occur
when the system load is heaviest and good performance is critical.
The tunable x86_non_temporal_threshold can be used to override the
default for the knowledgable user who really wants maximum cache
allocation to a single thread in a multi-threaded system.
The manual entry for the tunable has been expanded to provide
more information about its purpose.
modified: sysdeps/x86/cacheinfo.c
modified: manual/tunables.texi
Add Intel Key Locker:
https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html
support to <sys/platform/x86.h>. Intel Key Locker has
1. KL: AES Key Locker instructions.
2. WIDE_KL: AES wide Key Locker instructions.
3. AESKLE: AES Key Locker instructions are enabled by OS.
Applications should use
if (CPU_FEATURE_USABLE (KL))
and
if (CPU_FEATURE_USABLE (WIDE_KL))
to check if AES Key Locker instructions and AES wide Key Locker
instructions are usable.
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
The annotations for sigabbrev_np, sigdescr_np, strerrordesc_np,
strerrorname_np are not preliminary. These functions were
added precisely because they are AS-safe.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Texinfo no longer treats arguments to @set in @ifhtml blocks as
literal HTML, so the & in the entity references was encoded as
@amp; in HTML. Using the equivalent Unicode characters avoids
this issue.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables
to update thresholds for "rep movsb" and "rep stosb" at run-time.
Note that the user specified threshold for "rep movsb" smaller than
the minimum threshold will be ignored.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In TS 18661-1, getpayload had an unspecified return value for a
non-NaN argument, while C2x requires the return value -1 in that case.
This patch implements the return value of -1. I don't think this is
worth having a new symbol version that's an alias of the old one,
although occasionally we do that in such cases where the new function
semantics are a refinement of the old ones (to avoid programs relying
on the new semantics running on older glibc versions but not behaving
as intended).
Tested for x86_64 and x86; also ran math/ tests for aarch64 and
powerpc.
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
@insertcopying was not used at all in the Info and HTML versions.
As a result, the notices that need to be present according to the
GNU Free Documentation License were missing.
This commit shows these notices above the table of contents in the
HTML version, and as part of the Main Menu node in the Info version.
Remove the "This file documents" line because it is redundant with the
following line.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The function mbstowcs, by an XSI extension to POSIX, accepts a null
pointer for the destination wchar_t array. This API behaviour allows
you to use the function to compute the length of the required wchar_t
array i.e. does the conversion without storing it and returns the
number of wide characters required.
We remove the __write_only__ markup for the first argument because it
is not true since the destination may be a null pointer, and so the
length argument may not apply. We remove the markup otherwise the new
test case cannot be compiled with -Werror=nonnull.
We add a new test case for mbstowcs which exercises the destination is
a null pointer behaviour which we have now explicitly documented.
The mbsrtowcs and mbsnrtowcs behave similarly, and mbsrtowcs is
documented as doing this in C11, even if the standard doesn't come out
and call out this specific use case. We add one note to each of
mbsrtowcs and mbsnrtowcs to call out that they support a null pointer
for the destination.
The wcsrtombs function behaves similarly but in the other way around
and allows you to use a null destination pointer to compute how many
bytes you would need to convert the wide character input. We document
this particular case also, but leave wcsnrtombs as a references to
wcsrtombs, so the reader must still read the details of the semantics
for wcsrtombs.
Validation for pointer returned by backtrace_symbols () added.
Type of variables size and i is changed from size_t to int.
Variable size is used to collect the result from backtrace ()
that is an int. i is the loop counter variable so it can be an int.
Since, size_t size is changed to int size, in printf %zd is changed to %d.
Reviewed-by: DJ Delorie <dj@redhat.com>
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Without this, these functions appear under the node Default Thread
Attributes, which is confusing.
Eventually, the documentation should be merged with the (yet to be
documented) standardized functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When CET is enabled, it is an error to dlopen a non CET enabled shared
library in CET enabled application. It may be desirable to make CET
permissive, that is disable CET when dlopening a non CET enabled shared
library. With the new --enable-cet=permissive configure option, CET is
disabled when dlopening a non CET enabled shared library.
Add DEFAULT_DL_X86_CET_CONTROL to config.h.in:
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_elf_property
which enables CET features based on ELF property note.
--enable-cet=permissive it to
/* The default value of x86 CET control. */
#define DEFAULT_DL_X86_CET_CONTROL cet_permissive
which enables CET features permissively.
Update tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and
tst-cet-legacy-6b to check --enable-cet and --enable-cet=permissive.
GCC 7.5.0 (PR94200) will refuse to compile if both -mabi=% and
-mlong-double-128 are passed on the command line. Surprisingly,
it will work happily if the latter is not. For the sake of
maintaining status quo, test for and blacklist such compilers.
Tested with a GCC 8.3.1 and GCC 7.5.0 compiler for ppc64le.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This is a small step up from 2.25 which brings in support for
rewriting the .gnu.attributes section of libc/libm.so.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add compiler feature tests to ensure we can build ieee128 long double.
These test for -mabi=ieeelongdouble, -mno-gnu-attribute, and -Wno-psabi.
Likewise, verify some compiler bugs have been addressed. These aren't
helpful for building glibc, but may cause test failures when testing
the new long double. See notes below from Raji.
On powerpc64le, some older compiler versions give error for the function
signbit() for 128-bit floating point types. This is fixed by PR83862
in gcc 8.0 and backported to gcc6 and gcc7. This patch adds a test
to check compiler version to avoid compiler errors during make check.
Likewise, test for -mno-gnu-attribute support which was
On powerpc64le, a few files are built on IEEE long double mode
(-mabi=ieeelongdouble), whereas most are built on IBM long double mode
(-mabi=ibmlongdouble, the default for -mlong-double-128). Since binutils
2.31, linking object files with different long double modes causes
errors similar to:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
The warnings are fair and correct, but in order for glibc to have
support for both long double modes on powerpc64le, they have to be
ignored. This can be accomplished with the use of -mno-gnu-attribute
option when building the few files that require IEEE long double mode.
However, -mno-gnu-attribute is not available in GCC 6, the minimum
version required to build glibc, so this patch adds a test for this
feature in powerpc64le builds, and fails early if it's not available.
Co-Authored-By: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Co-Authored-By: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the GRND_INSECURE constant from Linux 5.6 to glibc's
sys/random.h. This is also added to the documentation. The constant
acts as a no-op for the Hurd implementation (as that doesn't check
whether the flags are known), which is semantically fine, while older
Linux kernels reject unknown flags with an EINVAL error.
Tested for x86_64.
In the "Extended Char Intro" the example incorrectly uses a function
called wgetc which doesn't exist. The example is corrected to use
getwc, which is correct for the use in this case.
Reported-by: Toomas Rosin <toomas@rosin.ee>
This test was failing in some powerpc systems as it was not checking
for ENOSPC return.
As said on the Linux man-pages and can be observed by the implementation
at mm/mprotect.c in the Linux Kernel source. The syscall pkey_alloc can
return EINVAL or ENOSPC. ENOSPC will indicate either that all keys are
in use or that the kernel does not support pkeys.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.net.br>
Kunpeng processer is a 64-bit Arm-compatible CPU released by Huawei,
and we have already signed a copyright assignement with the FSF.
This patch adds its to cpu list, and related macro for IFUNC.
Checked on aarch64-linux-gnu.
Reviewed-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is a thorough revision of all the material relating to the
functions time, stime, gettimeofday, settimeofday, clock_gettime,
clock_getres, clock_settime, and difftime, spilling over into the
discussion of time-related data types (which now get their own
section) and touching the adjtime family as well (which deserves its
own thorough revision, but I'd have to do a bunch of research first).
Substantive changes are:
* Document clock_gettime, clock_getres, and clock_settime. (Only
CLOCK_REALTIME and CLOCK_MONOTONIC are documented; the others are
either a bit too Linux-specific, or have more to do with measuring
CPU/processor time. That section _also_ deserves its own thorough
revision but again I'd have to do a bunch of research first.)
* Present gettimeofday, settimeofday, and struct timeval as obsolete
relative to clock_*.
* Remove the documentation of struct timezone. Matching POSIX,
say that the type of the second argument to gettimeofday and
settimeofday is [const] void *.
* Clarify ISO C and POSIX's requirements on time_t. Clarify the
circumstances under which difftime is equivalent to simple
subtraction.
* Consolidate documentation of most of the time-related data types
into a new section "Time Types," right after "Time Basics." (The
exceptions are struct tm, which stays in "Broken-down Time," and
struct times, which stays in "Processor And CPU Time."
* The "Elapsed Time" section is now called "Calculating Elapsed Time"
and includes only difftime and the discussion of how to compute
timeval differences by hand.
* Fold the "Simple Calendar Time," "High Resolution Calendar," and
"High Accuracy Clock" sections together into two new sections titled
"Getting the Time" and "Setting and Adjusting the Time."
The warning is confusing to those who do not understand the context,
and the warning is easy to misunderstand:
A reader needs to know that it was written by someone who is generally
skeptical of government influence and control, otherwise it reads as
an affirmation of the U.S. government's role as the ultimate editor of
the manual. This is precisely the opposite of what the warning
intends to convey. (Reportedly, it criticizes that several
U.S. administrations have tried to restrict the medical advice that
U.S.-funded health care workers can provide abroad, considering that
censorship.)
The warning is also misleading on a technical level. A reader who
makes the connection to pregnancy termination will get the wrong
impression that calling the abort function will terminate subprocesses
of the current process, but this is not what generally happens.
Finally, for both GNU and the FSF, it is inappropriate to use female
reproductive health as mere joke material, since these organizations
do not concern themselves with such issues otherwise, and the warning
is purportedly about something else entirely.
This reinstates commit 340d9652b9
("manual/startup.texi (Aborting a Program): Remove inappropriate
joke."), effectively reverting the revert in commit
ffa81c22a3 ("Revert:").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Move non-ASCII contributor names from installed headers
into contrib.texi when possible, and when it's not (the
copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h)
go back to ASCIIfied names. Problem reported by Joseph Myers in:
https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
C2X standardizes strftime %Ob and %OB support. This patch updates the
glibc manual to say these are C2X features, while noting that the
details of what is the alternative form of a month name are not
specified in C2X.
Note: C2X seems unclear to me about whether %h being equivalent to %b
means %Oh is thereby allowed and equivalent to %Ob; I've asked WG14.
Tested with "make info" and "make pdf".
* manual/time.texi (strftime): Document %Ob and %OB as C2X
features.
The current default nsswitch.conf file provided by glibc is not very
distribution friendly. The file contains some minimal directives that no
real distribution uses. This update aims to provide a rich set of
comments which are useful for all distributions, and a broader set of
service defines which should work for all distributions.
Tested defaults on x86_64 and they work. The nsswitch.conf file more
closely matches what we have in Fedora now, and I'll adjust Fedora to
use this version with minor changes to enable Fedora-specific service
providers.
v2
- Add missing databases to manual.
- Add link to manual from default nsswitch.conf.
- Sort nsswitch.conf according to most used database first.
v3
- Only mention implemented services in 'NSS Basics.'
- Mention 'automount' in 'Services in the NSS configuration.'
- Sort services in alphabetical order.
v4
- Project name is 'Samba'.
v5
- Fix typo in manual/nss.texi.
v6
- Fix another typo in manual/nss.texi. Ran spell checker this time.
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch starts preparation for C2X support in glibc headers by
adding a feature test macro _ISOC2X_SOURCE and corresponding
__GLIBC_USE (ISOC2X). (I chose to use the newer __GLIBC_USE style for
this rather than the older __USE_* macros tested with #ifdef.) As
with other such macros, C2X features are also enabled by compiling for
a standard newer than C17, or by using _GNU_SOURCE.
This patch does not itself enable anything new in the headers for C2X;
that is to be done in followup patches. (For example, most of the TS
18661-1 functions should be declared for C2X without any
__STDC_WANT_IEC_60559_BFP_EXT__ being needed, but the ones that
18661-1 adds to Annex F because of their close relation to IEEE 754
formats do still need the WANT macro in C2X.)
Once C2X becomes an actual standard we'll presumably move to using the
actual year in the feature test macro and __GLIBC_USE, with some
period when both macro spellings are accepted, as was done with
_ISOC9X_SOURCE.
Tested for x86_64.
* include/features.h (_ISOC2X_SOURCE): New feature test macro.
Undefine and define to 1 if [_GNU_SOURCE].
(__GLIBC_USE_ISOC2X): New macro. Undefine and redefine depending
on [_ISOC2X_SOURCE] and [__STDC_VERSION__ > 201710L].
(__USE_ISOC11): Also define to 1 if [_ISOC2X_SOURCE].
(__USE_ISOC99): Likewise.
(__USE_ISOC95): Likewise.
* manual/creature.texi (_ISOC2X_SOURCE): Document.
There is just one file-based implementation, so this dispatch
mechanism is unnecessary. Instead of the vtable pointer
__libc_utmp_jump_table, use a non-negative file_fd as the indicator
that the backend is initialized.
Add:
int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
and:
int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add:
int pthread_cond_clockwait (pthread_cond_t *cond,
pthread_mutex_t *mutex,
clockid_t clockid,
const struct timespec *abstime)
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
[1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No 32-bit system call wrapper is added because the interface
is problematic because it cannot deal with 64-bit inode numbers
and 64-bit directory hashes.
A future commit will deprecate the undocumented getdirentries
and getdirentries64 functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Change the tcache->counts[] entries to uint16_t - this removes
the limit set by char and allows a larger tcache. Remove a few
redundant asserts.
bench-malloc-thread with 4 threads is ~15% faster on Cortex-A72.
Reviewed-by: DJ Delorie <dj@redhat.com>
* malloc/malloc.c (MAX_TCACHE_COUNT): Increase to UINT16_MAX.
(tcache_put): Remove redundant assert.
(tcache_get): Remove redundant asserts.
(__libc_malloc): Check tcache count is not zero.
* manual/tunables.texi (glibc.malloc.tcache_count): Update maximum.
The tgkill function is sometimes used in crash handlers.
<bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h>
(which was added for the gettid system call wrapper).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The tcache counts[] array is a char, which has a very small range and thus
may overflow. When setting tcache_count tunable, there is no overflow check.
However the tunable must not be larger than the maximum value of the tcache
counts[] array, otherwise it can overflow when filling the tcache.
[BZ #24531]
* malloc/malloc.c (MAX_TCACHE_COUNT): New define.
(do_set_tcache_count): Only update if count is small enough.
* manual/tunables.texi (glibc.malloc.tcache_count): Document max value.
The twalk function is very difficult to use in a multi-threaded
program because there is no way to pass external state to the
iterator function.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On Linux, we define _POSIX_PRIORITY_SCHEDULING, but functions such
as sched_setparam and sched_setscheduler apply to individual threads,
not processes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As discussed during development for glibc 2.29, when we increased the
required minimum GCC version for building glibc to GCC 5, working
purely based on the times at which such requirements have been
increased in the past it would be appropriate for glibc 2.30 to
require GCC 6 (matching GCC 4.9 having been required for glibc 2.26).
Naming 6.2 specifically as the minimum version then means a separate
version requirement no longer needs to be specified for powerpc64le.
Thus, this patch increases the minimum to 6.2, removing the
documentation of the separate requirement for powerpc64le. It does
not remove the powerpc64le configure test, or any __GNUC_PREREQ that
could be removed as not being in installed headers or files shared
with gnulib; I think such cleanups are best done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 6.2 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Emag is a 64-bit CPU core released by AmpereComputing.
Add its name to cpu list, and corresponding macro as utilities for
later IFUNC dispatch.
* manual/tunables.texi (Tunable glibc.cpu.name): Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add emag.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_EMAG):
New macro.
* NEWS: Add the list of bugs fixed in 2.29.
* manual/contrib.texi: Update contributors list with some more
names.
* manual/install.texi: Update latest versions of packages
tested.
* INSTALL: Regenerated.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
Add Ares to the midr_el0 list and support ifunc dispatch. Since Ares
supports 2 128-bit loads/stores, use Neon registers for memcpy by
selecting __memcpy_falkor by default (we should rename this to
__memcpy_simd or similar).
* manual/tunables.texi (glibc.cpu.name): Add ares tunable.
* sysdeps/aarch64/multiarch/memcpy.c (__libc_memcpy): Use
__memcpy_falkor for ares.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_ARES):
Add new define.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add ares cpu.
@var is intended for placeholders (such as function parameters).
Actual variables need to use @code because @var causes upper-case
output, resulting in a different C identifier.
This patch updates some miscellaneous files from their upstream
sources (thereby bringing in copyright date updates for some of those
files).
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-12-28.17 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2019-01-01.
* scripts/config.sub: Update to version 2019-01-01.
* scripts/move-if-change: Update from gnulib.
We know that building glibc with GCC 4.9 is broken on various
platforms (bug 23993). As it's more than a year since we last
increased the minimum GCC version to build glibc, this patch changes
the requirement to be GCC 5 or later (indeed, based on 4.9 having been
required for building 2.26, it would be consistent in terms of timing
to require GCC 6 or later from the 2.30 release onwards). It
deliberately just updates the configure test and corresponding
documentation, leaving removal of no-longer-needed __GNUC_PREREQ tests
for a separate patch.
In the NEWS entry, the requirement for a newer GCC version for
powerpc64le is reiterated (as in the entry for the 4.9 requirement in
2.26) to avoid suggesting the version requirement there has gone down.
(If that version goes up further as part of support for binary128 long
double, of course the wording would change at that time.)
Tested for x86_64.
[BZ #23993]
* configure.ac (libc_cv_compiler_ok): Require GCC 5 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64): Add.
* manual/maint.texi: Document Y2038 symbol handling.
* time/localtime.c
(__localtime64): Add.
[__TIMERSIZE != 64] (__localtime): Turn into a wrapper.
This patch eliminates the gen-py-const.awk variant of gen-as-const,
switching to use of gnu-as-const.py (with a new --python option) to
process .pysym files (i.e., to generate nptl_lock_constants.py), as
the syntax of those files is identical to that of .sym files.
Note that the generated nptl_lock_constants.py is *not* identical to
the version generated by the awk script. Apart from the trivial
changes (comment referencing the new script, and output being sorted),
the constant FUTEX_WAITERS, PTHREAD_MUTEXATTR_FLAG_BITS,
PTHREAD_MUTEXATTR_FLAG_PSHARED and PTHREAD_MUTEX_PRIO_CEILING_MASK are
now output as positive rather than negative constants (on x86_64
anyway; maybe not necessarily on 32-bit systems):
< FUTEX_WAITERS = -2147483648
---
> FUTEX_WAITERS = 2147483648
< PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
< PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
---
> PTHREAD_MUTEXATTR_FLAG_BITS = 4043304960
> PTHREAD_MUTEXATTR_FLAG_PSHARED = 2147483648
< PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
---
> PTHREAD_MUTEX_PRIO_CEILING_MASK = 4294443008
This is because gen-as-const has a cast of the constant value to long
int, which gen-py-const lacks.
I think the positive values are more logically correct, since the
constants in question are in fact unsigned in C. But to reliably
produce gen-as-const.py output for constants that always (in C and
Python) reflects the signedness of values with the high bit of "long
int" set would mean more complicated logic needs to be used in
computing values.
The more correct positive values by themselves produce a failure of
nptl/test-mutexattr-printers, because masking with
~PTHREAD_MUTEXATTR_FLAG_BITS & ~PTHREAD_MUTEX_NO_ELISION_NP now leaves
a bit -1 << 32 in the Python value, resulting in a KeyError exception.
To avoid that, places masking with ~ of one of the constants in
question are changed to mask with 0xffffffff as well (this reflects
how ~ in Python applies to an infinite-precision integer whereas ~ in
C does not do any promotions beyond the width of int).
Tested for x86_64.
* scripts/gen-as-const.py (main): Handle --python option.
* scripts/gen-py-const.awk: Remove.
* Makerules (py-const-script): Use gen-as-const.py.
($(py-const)): Likewise.
* nptl/nptl-printers.py (MutexPrinter.read_status_no_robust): Mask
with 0xffffffff together with ~(PTHREAD_MUTEX_PRIO_CEILING_MASK).
(MutexAttributesPrinter.read_values): Mask with 0xffffffff
together with ~PTHREAD_MUTEXATTR_FLAG_BITS and
~PTHREAD_MUTEX_NO_ELISION_NP.
* manual/README.pretty-printers: Update reference to
gen-py-const.awk.
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-09-21.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-11-28.
* scripts/config.sub: Update to version 2018-11-28.
* scripts/install-sh: Update to version 2018-03-11.20.
* scripts/mkinstalldirs: Update to version 2018-03-07.03.
* scripts/move-if-change: Update to version 2018-03-07 03:47.
This patch does not have any functionality change, we only provide a spin
count tunes for pthread adaptive spin mutex. The tunable
glibc.pthread.mutex_spin_count tunes can be used by system administrator to
squeeze system performance according to different hardware capabilities and
workload characteristics.
The maximum value of spin count is limited to 32767 to avoid the overflow
of mutex->__data.__spins variable with the possible type of short in
pthread_mutex_lock ().
The default value of spin count is set to 100 with the reference to the
previous number of times of spinning via trylock. This value would be
architecture-specific and can be tuned with kinds of benchmarks to fit most
cases in future.
I would extend my appreciation sincerely to H.J.Lu for his help to refine
this patch series.
* manual/tunables.texi (POSIX Thread Tunables): New node.
* nptl/Makefile (libpthread-routines): Add pthread_mutex_conf.
* nptl/nptl-init.c: Include pthread_mutex_conf.h
(__pthread_initialize_minimal_internal) [HAVE_TUNABLES]: Call
__pthread_tunables_init.
* nptl/pthreadP.h (MAX_ADAPTIVE_COUNT): Remove.
(max_adaptive_count): Define.
* nptl/pthread_mutex_conf.c: New file.
* nptl/pthread_mutex_conf.h: New file.
* sysdeps/generic/adaptive_spin_count.h: New file.
* sysdeps/nptl/dl-tunables.list: New file.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Use
max_adaptive_count () not MAX_ADAPTIVE_COUNT.
* nptl/pthread_mutex_timedlock.c (__pthrad_mutex_timedlock):
Likewise.
Suggested-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Kemi.wang <kemi.wang@intel.com>
On platforms where long double used to have the same format as double,
but later switched to a different format (alpha, s390, sparc, and
powerpc), accessing the older behavior is possible and it happens via
__nldbl_* functions (not on the API, but accessible from header
redirection and from compat symbols). These functions write to the
global flag __ldbl_is_dbl, which tells other functions that long double
variables should be handled as double. This patch takes the first step
towards removing this global flag and creates __vstrfmon_l_internal,
which takes an explicit flags parameter.
This change arguably makes the generated code slightly worse on
architectures where __ldbl_is_dbl is never true; right now, on those
architectures, it's a compile-time constant; after this change, the
compiler could theoretically prove that __vstrfmon_l_internal was
never called with a nonzero flags argument, but it would probably need
LTO to do it. This is not performance critical code and I tend to
think that the maintainability benefits of removing action at a
distance are worth it. However, we _could_ wrap the runtime flag
check with a macro that was defined to ignore its argument and always
return false on architectures where __ldbl_is_dbl is never true, if
people think the codegen benefits are important.
Tested for powerpc and powerpc64le.
In the description of gcvt, add missing closing parenthesis in the
comparison with sprintf.
* manual/arith.texi (gcvt): Add missing closing parenthesis.
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
This patch extends gen-libm-test.py to generate the ulps table for the
manual, so meaning there is only a single ulps file parser needed and
another Perl script is eliminated. As with the introduction of
gen-libm-test.py, this is designed to generate exactly the same
libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still
shorter in lines than the old gen-libm-test.pl even after this patch.)
Note that this introduces a Python dependency for building the manual,
which is thus noted in install.texi and NEWS.
Tested building html / info / pdf versions of the manual.
* math/gen-libm-test.py: Import os.
(ALL_FLOATS_MANUAL): New constant.
(ALL_FLOATS_SUFFIX): Likewise.
(Ulps.all_functions): New function.
(real_all_ulps): Likewise.
(generate_err_table_sub): Likewise.
(generate_err_table): Likewise.
(main): Handle -s and -m options.
* manual/libm-err-tab.pl: Remove.
* manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py
instead of libm-err-tab.pl.
[$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no)
!= no].
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build manual.
* INSTALL: Regenerated.
Job control was made mandatory in POSIX.1-2001: compare
<http://pubs.opengroup.org/onlinepubs/7990989775/xsh/unistd.h.html> with
<http://pubs.opengroup.org/onlinepubs/009695399/basedefs/unistd.h.html>.
Seventeen years later, we need not devote an entire manual @node to
warning people that this was once an optional POSIX feature.
* manual/job.texi (Job Control is Optional): Remove node, as
job control has not been optional in quite some time.
(Job Control): Mention briefly that systems older than
POSIX.1-2001 might not support job control.
* manual/conf.texi (_POSIX_JOB_CONTROL): Will always be
defined on systems conforming to POSIX.1-2001.
For architectures and ABIs that are added in version 2.29 or later the
option --enable-obsolete-nsl is no longer available, and no libnsl
compatibility library is built.
The install.texi documentation of uses of Perl and Python is
substantially out of date.
The description of Perl is "to test the installation" (which I
interpret as referring to test-installation.pl), but it's used for
more tests than that, and to build the manual, and to regenerate one
file in the source tree.
The description of Python is only for pretty-printer tests, but it's
used for other tests / benchmarks as well (and for other internal uses
such as updating Unicode data, for which we already require Python 3,
but I think install.texi only needs to describe uses from the main
glibc Makefiles).
This patch updates the descriptions of what those tools are used for.
The Python information (and information about other tools for testing
pretty printers) was awkwardly in the middle of the general
description of building and testing glibc, rather than with the rest
of information about tools used in glibc build and test; this patch
moves the information about those tools into the main list.
Tested with regeneration of INSTALL as well as "make info" and "make
pdf".
* manual/install.texi (Configuring and compiling): Do not list
tools used for testing pretty printers here.
(Tools for Compilation): List Python, PExpect and GDB here.
Update descriptions of uses of Perl and Python.
* INSTALL: Regenerate.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates the manual and adds a new chapter to the manual,
explaining types macros, constants and functions defined by ISO C11
threads.h standard.
[BZ# 14092]
* manual/debug.texi: Update adjacent chapter name.
* manual/probes.texi: Likewise.
* manual/threads.texi (ISO C Threads): New section.
(POSIX Threads): Convert to a section.
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
This is a major rewrite of the description of 'crypt', 'getentropy',
and 'getrandom'.
A few highlights of the content changes:
- Throughout the manual, public headers, and user-visible messages,
I replaced the term "password" with "passphrase", the term
"password database" with "user database", and the term
"encrypt(ion)" with "(one-way) hashing" whenever it was applied to
passphrases. I didn't bother making this change in internal code
or tests. The use of the term "password" in ruserpass.c survives,
because that refers to a keyword in netrc files, but it is adjusted
to make this clearer.
There is a note in crypt.texi explaining that they were
traditionally called passwords but single words are not good enough
anymore, and a note in users.texi explaining that actual passphrase
hashes are found in a "shadow" database nowadays.
- There is a new short introduction to the "Cryptographic Functions"
section, explaining how we do not intend to be a general-purpose
cryptography library, and cautioning that there _are_, or have
been, legal restrictions on the use of cryptography in many
countries, without getting into any kind of detail that we can't
promise to keep up to date.
- I added more detail about what a "one-way function" is, and why
they are used to obscure passphrases for storage. I removed the
paragraph saying that systems not connected to a network need no
user authentication, because that's a pretty rare situation
nowadays. (It still says "sometimes it is necessary" to
authenticate the user, though.)
- I added documentation for all of the hash functions that glibc
actually supports, but not for the additional hash functions
supported by libxcrypt. If we're going to keep this manual section
around after the transition is more advanced, it would probably
make sense to add them then.
- There is much more detailed discussion of how to generate a salt,
and the failure behavior for crypt is documented. (Returning an
invalid hash on failure is what libxcrypt does; Solar Designer's
notes say that this was done "for compatibility with old programs
that assume crypt can never fail".)
- As far as I can tell, the header 'crypt.h' is entirely a GNU
invention, and never existed on any other Unix lineage. The
function 'crypt', however, was in Issue 1 of the SVID and is now
in the XSI component of POSIX. I tried to make all of the
@standards annotations consistent with this, but I'm not sure I got
them perfectly right.
- The genpass.c example has been improved to use getentropy instead
of the current time to generate the salt, and to use a SHA-256 hash
instead of MD5. It uses more random bytes than is strictly
necessary because I didn't want to complicate the code with proper
base64 encoding.
- The testpass.c example has three hardwired hashes now, to
demonstrate that different one-way functions produce different
hashes for the same input. It also demonstrates how DES hashing
only pays attention to the first eight characters of the input.
- There is new text explaining in more detail how a CSPRNG differs
from a regular random number generator, and how
getentropy/getrandom are not exactly a CSPRNG. I tried not to make
specific falsifiable claims here. I also tried to make the
blocking/cancellation/error behavior of both getentropy and
getrandom clearer.
In preparation for a major revision of the documentation for
crypt(_r), getentropy, and getrandom, reorganize crypt.texi. This
patch does not change any text; it only deletes and moves text.
The description of 'getpass' moves to terminal.texi, since all it does
is read a password from the controlling terminal with echo disabled.
The "Legal Problems" section of crypt.texi is dropped, and the
introductory text is shifted down to the "Encrypting Passwords"
section; the next patch will add some new introductory text.
Also, it is no longer true that crypt.texi's top @node needs to have
no pointers. That was a vestige of crypt/ being an add-on. (makeinfo
itself doesn't need @node pointers anymore, but the scripts that
assemble the libc manual's topmost node rely on each chapter-level
node having them.)
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly. Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.
The idea follows other LFS interfaces that provide two symbols:
1. A new LFS fcntl64 is added on default ABI with the usual macros to
select it for FILE_OFFSET_BITS=64.
2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
struct.
3. Keep a compat symbol with old broken semantic for architectures
that do not define __OFF_T_MATCHES_OFF64_T.
So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required. So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).
Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #20251]
* NEWS: Mention fcntl64 addition.
* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
* login/utmp_file.c: Likewise.
* sysdeps/posix/fdopendir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/unix/pt-fcntl.c: Likewise.
* include/fcntl.h (__libc_fcntl64, __fcntl64,
__fcntl64_nocancel_adjusted): New prototype.
(__fcntl_nocancel_adjusted): Remove prototype.
* io/Makefile (routines): Add fcntl64.
(CFLAGS-fcntl64.c): New rule.
* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
* io/fcntl.h (fcntl64): Add prototype and redirect if
__USE_FILE_OFFSET64 is defined.
* io/fcntl64.c: New file.
* manual/llio.text: Add a note for which commands fcntl acts a
cancellation point.
* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
New symbols.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
non-LFS case.
* sysdeps/unix/sysv/linux/fcntl64.c: New file.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
(tests-internal): Add tst-ofdlocks-compat.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(fcntl64): New symbol.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
fcntl64): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-04-30 Raymond Nicholson <rain1@airmail.cc>
* manual/startup.texi (Aborting a Program): Remove inappropriate joke.
This complies with the decision of the project leader and primary and
ultimate maintainer, who partially delegated maintainership to myself
and others under certain constraints.
This is also in line with the community-agreed procedures.
It is obvious that we didn't have consensus on a decision to install
that patch, since both sides are still arguing over it.
As for the decision to reverse the deletion, if we even need one to
counter a move that did not have consensus, although nobody else offered
to install the reversal and restore the status prior to the fait
accompli, and some explicitly refused to do so themselves, nobody
objected when I offered to do so. Therefore, by the same reasoning that
led to the mistaken installation of the patch, and after a much longer
wait for objections, I understand there is consensus on my reverting it.
Since tile support has been removed from the Linux kernel for 4.17,
this patch removes the (unmaintained) port to tilegx from glibc (the
tilepro support having been previously removed). This reflects the
general principle that a glibc port needs upstream support for the
architecture in all the components it build-depends on (so binutils,
GCC and the Linux kernel, for the normal case of a port supporting the
Linux kernel but no other OS), in order to be maintainable.
Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile,
there are updates to various comments referencing tile for which
removal of those references seemed appropriate. The configuration is
removed from README and from build-many-glibcs.py. contrib.texi keeps
mention of removed contributions, but I updated Chris Metcalf's entry
to reflect that he also contributed the non-removed support for the
generic Linux kernel syscall interface.
__ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used
by tile.
* sysdeps/tile: Remove.
* sysdeps/unix/sysv/linux/tile: Likewise.
* README (tilegx-*-linux-gnu): Remove from list of supported
configurations.
* manual/contrib.texi (Contributors): Mention Chris Metcalf's
contribution of support for generic Linux kernel syscall
interface.
* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
tilegx configurations.
(Config.install_linux_headers): Do not handle tile.
* sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile
in comment.
* sysdeps/unix/sysv/linux/nios2/Makefile: Likewise.
* sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
* sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile
in comment.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
The example did not work because the null byte was not converted, and
mbrtowc was called with a zero-length input string. This results in a
(size_t) -2 return value, so the function always returns NULL.
The size computation for the heap allocation of the result was
incorrect because it did not deal with integer overflow.
Error checking was missing, and the allocated memory was not freed on
error paths. All error returns now set errno. (Note that there is an
assumption that free does not clobber errno.)
The slightly unportable comparision against (size_t) -2 to catch both
(size_t) -1 and (size_t) -2 return values is gone as well.
A null wide character needs to be stored in the result explicitly, to
terminate it.
The description in the manual is updated to deal with these finer
points. The (size_t) -2 behavior (consuming the input bytes) matches
what is specified in ISO C11.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): Remove errno
values from Linux-specific section now that it is in the GNU section.
* sysdeps/gnu/errlist.c: Regenerate.
* hurd/Makefile (routines): Add hurdlock.
* hurd/Versions (GLIBC_PRIVATE): Added new entry to export the above
interface.
(HURD_CTHREADS_0.3): Remove __libc_getspecific.
* hurd/hurdpid.c: Include <lowlevellock.h>
(_S_msg_proc_newids): Use lll_wait to synchronize.
* hurd/hurdsig.c: (reauth_proc): Use __mutex_lock and __mutex_unlock.
* hurd/setauth.c: Include <hurdlock.h>, use integer for synchronization.
* mach/Makefile (lock-headers): Remove machine-lock.h.
* mach/lock-intern.h: Include <lowlevellock.h> instead of
<machine-lock.h>.
(__spin_lock_t): New type.
(__SPIN_LOCK_INITIALIZER): New macro.
(__spin_lock, __spin_unlock, __spin_try_lock, __spin_lock_locked,
__mutex_init, __mutex_lock_solid, __mutex_unlock_solid, __mutex_lock,
__mutex_unlock, __mutex_trylock): Use lll to implement locks.
* mach/mutex-init.c: Include <lowlevellock.h> instead of <cthreads.h>.
(__mutex_init): Initialize with lll.
* manual/errno.texi (EOWNERDEAD, ENOTRECOVERABLE): New errno values.
* sysdeps/mach/Makefile: Add libmachuser as dependencies for libs
needing lll.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* sysdeps/mach/hurd/cthreads.c (__libc_getspecific): Remove function.
* sysdeps/mach/hurd/bits/libc-lock.h: Remove file.
* sysdeps/mach/hurd/setpgid.c: Include <lowlevellock.h>.
(__setpgid): Use lll for synchronization.
* sysdeps/mach/hurd/setsid.c: Likewise with __setsid.
* sysdeps/mach/bits/libc-lock.h: Include <tls.h> and <lowlevellock.h>
instead of <cthreads.h>.
(_IO_lock_inexpensive): New macro
(__libc_lock_recursive_t, __rtld_lock_recursive_t): New structures.
(__libc_lock_self0): New declaration.
(__libc_lock_owner_self): New macro.
(__libc_key_t): Remove type.
(_LIBC_LOCK_INITIALIZER): New macro.
(__libc_lock_define_initialized, __libc_lock_init, __libc_lock_fini,
__libc_lock_fini_recursive, __rtld_lock_fini_recursive,
__libc_lock_lock, __libc_lock_trylock, __libc_lock_unlock,
__libc_lock_define_initialized_recursive,
__rtld_lock_define_initialized_recursive,
__libc_lock_init_recursive, __libc_lock_trylock_recursive,
__libc_lock_lock_recursive, __libc_lock_unlock_recursive,
__rtld_lock_initialize, __rtld_lock_trylock_recursive,
__rtld_lock_lock_recursive, __rtld_lock_unlock_recursive
__libc_once_define, __libc_mutex_unlock): Reimplement with lll.
(__libc_lock_define_recursive, __rtld_lock_define_recursive,
_LIBC_LOCK_RECURSIVE_INITIALIZER, _RTLD_LOCK_RECURSIVE_INITIALIZER):
New macros.
Include <libc-lockP.h> to reimplement libc_key* with pthread_key*.
* hurd/hurdlock.c: New file.
* hurd/hurdlock.h: New file.
* mach/lowlevellock.h: New file
The description of the interplay between feature test macros and
compiler options in the description of _DEFAULT_SOURCE is a little
confusing, and dated, so clarify the situation, and don't assume a
specific value for _DEFAULT_SOURCE.
Also, _DEFAULT_SOURCE is supposed to be defined if none of the C/POSIX
feature test macros are defined, but the condition was lacking a test
for _ISOC11_SOURCE, so that is also addressed.
[BZ #22862]
* include/features.h: Add _ISOC11_SOURCE to test for whether
to define _DEFAULT_SOURCE.
* manual/creature.texi (_DEFAULT_SOURCE): Improve
documentation.
The current description refers to ISO C99 not being widely adopted,
which it is believed to be now.
* manual/creature.texi (_ISOC99_SOURCE): Update the dated
description.
Several feature test macros are documented in features.h but absent in
the manual, and some documented macros accept undocumented values.
This commit updates the manual to mention all the accepted macros,
along with any values that hold special meaning.
* manual/creature.texi (_POSIX_C_SOURCE): Document special
values of 199606L, 200112L, and 200809L.
(_XOPEN_SOURCE): Document special values of 600 and 700.
(_ISOC11_SOURCE): Document macro.
(_ATFILE_SOURCE): Likewise.
(_FORTIFY_SOURCE): Likewise.
This is a minor rewording to clarify the behaviour of
get_current_dir_name. Additionally, the @vindex is moved above the
@deftypefun so that following links give a better result with regard
to context.
[BZ #6889]
* manual/filesys.texi (get_current_dir_name): Clarify
behaviour.
The opening parenthesis for function arguments in an @deftypefun need
to be separated from the function name. This isn't just a matter of
the GNU coding style---it causes the "(void" (in this case) to be
rendered as a part of the function name, causing a visual defect, and
also results in a warning to the following effect during `make pdf':
Warning: unbalanced parentheses in @def...)
* manual/platform.texi (__riscv_flush_icache): Fix @deftypefun
syntax.
There are some bug reports from people setting CFLAGS not including a
-O option and then being confused when the build fails. This patch
addresses this by documenting the proper use of CC and CFLAGS in more
detail - saying what options should go where and specifying the
requirement to compile with optimization.
The previous text incorrectly used @var markup with CC and CFLAGS.
The correct markup for environment variables is @env, but it's also
the case that passing such variables explicitly on the configure
command line is preferred to passing them in the environment, so this
patch changes the documentation to describe passing them on the
command line (and uses @code).
In many cases putting options in the wrong place may in fact work, but
I believe what I've specified is the correct rule for which options to
put where.
[BZ #20980]
[BZ #21234]
* manual/install.texi (Configuring and compiling): Describe
passing CC and CFLAGS on configure command line, not as
environment variables. Use @code markup on those variables.
Specify what options go in CC and what go in CFLAGS. Note the
requirement to compile with optimization.
* INSTALL: Regenerated.
Remove the slow paths from pow. Like several other double precision math
functions, pow is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP. A simple test over a few hundred million
values shows pow is 10% faster on average. This fixes BZ #13932.
[BZ #13932]
* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
* benchtests/pow-inputs: Update comment for slow path cases.
* manual/probes.texi (slowpow_p10): Delete removed probe.
(slowpow_p10): Likewise.
* math/Makefile: Remove halfulp.c and slowpow.c.
* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/generic/math_private.h (__exp1): Remove error argument.
(__halfulp): Remove.
(__slowpow): Remove.
* sysdeps/i386/fpu/halfulp.c: Delete file.
* sysdeps/i386/fpu/slowpow.c: Likewise.
* sysdeps/ia64/fpu/halfulp.c: Likewise.
* sysdeps/ia64/fpu/slowpow.c: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
improve comments and add error analysis.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
(power1): Remove function:
(log1): Remove error argument, add error analysis.
(my_log2): Remove function.
* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
A number of cross-references to the GCC info manual cause Texinfo
warnings; e.g.:
./creature.texi:11: warning: @xref node name should not contain `.'
This is due to "gcc.info" being used in the INFO-FILE-NAME (fourth)
argument. Changing it to "gcc" removes these warnings. (Manually
confirmed equivalent behaviour for make info, html, and pdf.)
* manual/creature.texi: Convert references to gcc.info to gcc.
* manual/stdio.texi: Likewise.
* manual/string.texi: Likewise.
Remove the slow paths from log. Like several other double precision math
functions, log is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
Interestingly removing the slow paths makes hardly any difference in practice:
the worst case error is still ~0.502ULP, and exp(log(x)) shows identical results
before/after on many millions of random cases. All GLIBC math tests pass on
AArch64 and x64 with no change in ULP error. A simple test over a few hundred
million values shows log is now 18% faster on average.
* manual/probes.texi (slowlog): Delete documentation of removed probe.
(slowlog_inexact): Likewise
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Remove slow paths.
* sysdeps/ieee754/dbl-64/ulog.h: Remove unused declarations.
This function is used by GCC to enforce ordering between data writes and
instruction fetches, and while we'd prefer that users rely on the GCC
intrinsic when possible this is user visible in case that's not
possible.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/platform.texi: Add RISC-V documenation for
__riscv_flush_icache.
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
"%OB" is considered a conversion specifier ("B" is the format
specifier), and the list of format specifiers for months in the
description of the optional "O" modifier was incomplete. A
cross-reference from the ALTMON_* constants to the strftime section
is also provided. Lastly, some grammatical fixes (commas) are made
and paragraphs refactored (rewrapped).
* manual/locale.texi (ALTMON_1, ALTMON_2, ALTMON_3, ALTMON_4,
ALTMON_5, ALTMON_6, ALTMON_7, ALTMON_8, ALTMON_9, ALTMON_10,
ALTMON_11, ALTMON_12): Improve documentation.
* manual/time.texi (strftime): Likewise.
[BZ #10871]
* manual/locale.texi: Document ALTMON_1..12 constants for
nl_langinfo. Specify when to use ALTMON instead of MON.
* manual/time.texi (strftime, strptime): Document GNU extension
permitting O modifier with %B and %b. Specify when to use
%OB instead of %B.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates various files from their upstream sources. This
brings in copyright date updates for some of those files.
Tested for x86_64.
* manual/texinfo.tex: Update to version 2017-12-26.21 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-01-01.
* scripts/config.sub: Update to version 2018-01-01.
* scripts/move-if-change: Update from gnulib.
The current glibc manual is ambiguous about the errno value on success
and suggests that it is left unchanged. Some functions might and
sometimes do change the errno value, however they never set it to 0.
This patch from Zack Weinberg clarifies this section of the manual.
Changelog:
[BZ #22615]
* manual/errno.texi (Checking for Errors): Explicitly say that errno
might be set on success.
That way it matches the standard and the behaviour of the finite
function.
Changelog:
[BZ #22596]
* manual/arith.texi (finite): Fix the description of the return
value.
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2017-12-18.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2017-12-17.
* scripts/config.sub: Update to version 2017-11-23.
* scripts/install-sh: Update to version 2017-09-23.17.
* scripts/move-if-change: Update to version 2017-09-13 06:45.
To build static PIE, all .o files are compiled with -fPIE. Since
--enable-static-pie is designed to provide additional security hardening
benefits, it also implies that glibc programs and tests are created as
dynamic position independent executables (PIE) by default for better
security hardening.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
* manual/install.texi: Document that --enable-static-pie
implies PIE.
* INSTALL: Regenerated.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
