TS 18661-3 specifies that macros prefixed with FLTN_ can be defined in
float.h, only if __STDC_WANT_IEC_60559_TYPES_EXT__ is defined as a macro
before the inclusion of float.h. Since GCC 7.0, these macros are provided
under this condition, however, for older versions of GCC, these macros are
not provided at all. This patch allows the definitions of such macros in
include/float.h for older compilers, if the condition above is met, and
even if _ISOMAC is defined.
* include/float.h: Allow the definition of macros prefixed with
FLT128 even if _ISOMAC is defined, but provided that
__STDC_WANT_IEC_60559_TYPES_EXT__ is defined as a macro.
* manual/math.texi (Mathematics): Add description for _FloatN and
_FloatNx types and mentions that they are not support in glibc for
any architecture, so far.
* manual/arith.texi (wcstof, wcstold): Replace the mention to
stdlib.h with wchar.h.
(Parsing of Floats): Add descriptions for strtofN and wcstofN.
(Printing of Floats): Add description for strfromfN.
The implementations are contained with sysdeps/ieee754/float128 as
they are only built when _Float128 is enabled within libc/m.
* include/gmp.h (__mpn_construct_float128): New declaration.
* include/stdlib.h: Include bits/floatn.h for _Float128 tests.
(__strtof128_l): New declaration.
(__strtof128_nan): Likewise.
(__wcstof128_nan): Likewise.
(__strtof128_internal): Likewise.
(____strtof128_l_internal): Likewise.
* include/wchar.h: Include bits/floatn.h for _Float128 tests.
(__wcstof128_l): New declaration.
(__wcstof128_internal): Likewise.
* stdlib/Makefile (bug-strtod2): Link libm too.
* stdlib/stdlib.h (strtof128): New declaration.
(strtof128_l): Likewise.
* stdlib/tst-strtod-nan-locale-main.c: Updated to use
tst-strtod.h macros to ensure float128 gets tested too.
* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro.
* stdlib/tst-strtod.h: Include bits/floatn.h for _Float128
tests.
(IF_FLOAT128): New macro.
(GEN_TEST_STRTOD): Update to optionally include _Float128 in
the tests.
(STRTOD_TEST_FOREACH): Likewise.
* sysdeps/ieee754/float128/Makefile: Insert new strtof128 and
wcstof128 functions into libc.
* sysdeps/ieee754/float128/Versions: Add exports for the above
new functions.
* sysdeps/ieee754/float128/mpn2float128.c: New file.
* sysdeps/ieee754/float128/strtod_nan_float128.h: New file.
* sysdeps/ieee754/float128/strtof128.c: New file.
* sysdeps/ieee754/float128/strtof128_l.c: New file.
* sysdeps/ieee754/float128/strtof128_nan.c: New file.
* sysdeps/ieee754/float128/wcstof128.c: New file.
* sysdeps/ieee754/float128/wcstof128_l.c: New file.
* sysdeps/ieee754/float128/wcstof128_nan.c: New fike.
* wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS.
(CFLAGS-wcstof128_l): Likewise.
* wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests.
(wcstof128): New declaration.
(wcstof128_l): Likewise.
bsd_signal was added in XPG4.2, so should be declared for
__USE_XOPEN_EXTENDED, instead of the present __USE_XOPEN condition.
This patch fixes the condition accordingly.
Tested for x86_64.
[BZ #21552]
* signal/signal.h (bsd_signal): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
* conform/Makefile (test-xfail-XPG4/signal.h/conform): Remove.
sigwait was added to POSIX in 1995; it is not in older POSIX versions
or XPG4 / XPG4.2. Thus it should be declared only if
__USE_POSIX199506; signal.h wrongly declares it for __USE_POSIX.
(sigwaitinfo is correctly conditioned on __USE_POSIX199309.) This
patch fixes the condition on the declaration of sigwait.
Tested for x86_64. Because of other namespace problems this does not
allow any conform/ XFAILs to be removed.
[BZ #21550]
* signal/signal.h (sigwait): Only declare if [__USE_POSIX199506].
Implement strcpy family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcpy family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcpy-sse2 and stpcpy-sse2.
* sysdeps/x86_64/multiarch/ifunc-unaligned-ssse3.h: New file.
* sysdeps/x86_64/multiarch/stpcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpncpy.c: Likewise.
* sysdeps/x86_64/multiarch/strcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.c: Likewise.
* sysdeps/x86_64/multiarch/strncpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.S: Removed.
* sysdeps/x86_64/multiarch/stpncpy.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
* sysdeps/x86_64/multiarch/strncpy.S: Likewise.
* sysdeps/x86_64/multiarch/stpncpy-c.c (weak_alias): New.
(libc_hidden_def): Always defined as empty.
* sysdeps/x86_64/multiarch/strncpy-c.c (libc_hidden_builtin_def):
Always Defined as empty.
There is no longer a need for string2.h, so remove it and all mention of it.
Move the redirect for __stpcpy to include/string.h since it is still required
until all internal uses have been renamed.
This fixes several linknamespace/localplt failures when building with -Os.
[BZ #15105]
[BZ #19463]
* include/string.h: Add internal redirect for __stpcpy.
* string/Makefile: Remove bits/string2.h.
* string/string.h: Update comment.
* string/string-inlines.c: Remove bits/string2.h include and comment.
* string/bits/string2.h: Remove file.
There is currently no "cross-platform" (x86 and POWER) support for
determining the cacheline size.
This patch adds support to sysconf() to correctly report cacheline sizes
based on the information in the auxilliary vector.
Thus, using sysconf() is a cross-platform (x86 and POWER) solution for
determining cacheline sizes.
Support is added (on powerpc) for:
_SC_LEVEL1_ICACHE_SIZE _SC_LEVEL1_ICACHE_ASSOC _SC_LEVEL1_ICACHE_LINESIZE
_SC_LEVEL1_DCACHE_SIZE _SC_LEVEL1_DCACHE_ASSOC _SC_LEVEL1_DCACHE_LINESIZE
_SC_LEVEL2_CACHE_SIZE _SC_LEVEL2_CACHE_ASSOC _SC_LEVEL2_CACHE_LINESIZE
_SC_LEVEL3_CACHE_SIZE _SC_LEVEL3_CACHE_ASSOC _SC_LEVEL3_CACHE_LINESIZE
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: New file.
Add powerpc-specific overrides for L1, L2, L3 CACHE_SIZEs,
CACHE_ASSOCs, and CACHE_LINESIZEs, retrieving from auxv.
* sysdeps/unix/sysv/linux/powerpc/test-powerpc-linux-sysconf.c:
New file. Invoke newly supported sysconf values for powerpc,
and report results. If none are supported, report so.
* sysdeps/unix/sysv/linux/powerpc/Makefile (tests): Add new test,
tst-sysconf.
In sys/wait.h, waitid and associated constants and types are UX-shaded
in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so
should be appropriately conditional in the headers. This patch fixes
the conditionals accordingly. (WCONTINUED is actually still
XSI-shaded in POSIX.1:2008, but W* is also reserved there without
XSI-shading, so nothing special needs to be done about the
conditionals on WCONTINUED to conform to POSIX.1:2008 namespace
rules.)
Tested for x86_64.
[BZ #21561]
* posix/sys/wait.h (idtype_t): Change [__USE_XOPEN] condition to
[__USE_XOPEN_EXTENDED].
(id_t): Likewise.
(include of <bits/types/siginfo_t.h): Likewise.
(waitid): Likewise.
* sysdeps/unix/sysv/linux/bits/waitflags.h (WSTOPPED): Condition
on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8].
(WEXITED): Likewise.
(WCONTINUED): Likewise.
(WNOWAIT): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
A recent GCC change to expand floating-point classification built-in
functions inline using integer rather than floating-point arithmetic
in some cases resulted in localplt test failures for nios2 and sparc32
<https://sourceware.org/ml/libc-testresults/2017-q2/msg00320.html>.
This patch updates the localplt.data files in question to mark the
relevant symbols as optional / add a new optional symbol. (The GCC
patch has been reverted because of other problems it caused, but one
can assume it will be applied again, without changes that would affect
the PLT entries generated, once those issues have been resolved.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/nios2/localplt.data (__gtdf2): Mark
libc.so PLT entry optional.
(__gtsf2): Likewise.
(__unorddf2): Likewise.
(__unordsf2): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/localplt.data (_Q_fgt):
New optional libc.so PLT entry.
The sigpause function is declared for __USE_XOPEN. As it's new in
XPG4.2 it should be declared only for __USE_XOPEN_EXTENDED. This
patch fixes the declaration accordingly.
Tested for x86_64.
[BZ #21554]
* signal/signal.h (sigpause):: Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
sys/wait.h includes signal.h unconditionally. But the permission to
do so is UX-shaded in XPG4.2, and XSI-shaded in POSIX before 2008, so
this should not be unconditional. This patch fixes this
conservatively: the include is kept, but conditioned on the standards
that permit it (meaning it is still present by default, because
non-XSI POSIX.1:2008 is enabled by default). <bits/types.h> is now
included unconditionally to provide the required definition of
__pid_t; it was previously included via <signal.h>. Some standards
require pid_t to be defined here, and all allow it to be defined here;
previously defined via <signal.h>, it's now defined directly in this
header.
Tested for x86_64. This does not fix any of the sys/wait.h
conformtest failures, but substantially reduces the number of
namespace failures for sys/wait.h for XPG4 and POSIX.
[BZ #21560]
* posix/sys/wait.h: Condition include of <signal.h> on
[__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. Include <bits/types.h>
unconditionally.
[!__pid_t_defined] (pid_t): Define typedef.
This is just a style fix; we always prefer the shorthand macros over
bare uses of __attribute__, even in private headers.
* include/errno.h (__errno_location): Use __attribute_const__
instead of bare __attribute__.
Like basically all before-compile headers, dl-tunable-list.h should be
generated using a stamp file to minimize unnecessary rebuilding; it
wasn't being added to common-generated, so it wouldn't get cleaned up;
and it was in between the rules for libc-modules.h/.stmp and their own
addition to common-generated.
* Makeconfig (dl-tunable-list.h): Generate using a stamp file.
(common-generated): Add libc-modules.h and libc-modules.stmp in a
more appropriate location. Also add dl-tunable-list.h and
dl-tunable-list.stmp.
Optimize strrchr/wcsrchr with AVX2 to check 32 bytes with vector
instructions. It is as fast as SSE2 version for small data sizes
and up to 1X faster for large data sizes on Haswell. Select AVX2
version on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strrchr-sse2, strrchr-avx2, wcsrchr-sse2 and wcsrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strrchr_avx2,
__strrchr_sse2, __wcsrchr_avx2 and __wcsrchr_sse2.
* sysdeps/x86_64/multiarch/strrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strrchr.c: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr.c: Likewise.
Optimize memrchr with AVX2 to search 32 bytes with a single vector
compare instruction. It is as fast as SSE2 memrchr for small data
sizes and up to 1X faster for large data sizes on Haswell. Select
AVX2 memrchr on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memrchr-sse2 and memrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memrchr_avx2 and
__memrchr_sse2.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/memrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memrchr.c: Likewise.
Optimize strchr/strchrnul/wcschr with AVX2 to search 32 bytes with vector
instructions. It is as fast as SSE2 versions for size <= 16 bytes and up
to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on
AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strchr-sse2, strchrnul-sse2, strchr-avx2, strchrnul-avx2,
wcschr-sse2 and wcschr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strchr_avx2,
__strchrnul_avx2, __strchrnul_sse2, __wcschr_avx2 and
__wcschr_sse2.
* sysdeps/x86_64/multiarch/strchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchr.c: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul.c: Likewise.
* sysdeps/x86_64/multiarch/wcschr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr.c: Likewise.
* sysdeps/x86_64/multiarch/strchr.S: Removed.
Optimize strlen/strnlen/wcslen/wcsnlen with AVX2 to check 32 bytes with
a single vector compare instruction. It is as fast as SSE2 versions for
size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell.
Select AVX2 version on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strlen-sse2, strnlen-sse2, strlen-avx2, strnlen-avx2,
wcslen-sse2, wcslen-avx2 and wcsnlen-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strlen_avx2,
__strlen_sse2, __strnlen_avx2, __strnlen_sse2, __wcslen_avx2,
__wcslen_sse2 and __wcsnlen_avx2.
* sysdeps/x86_64/multiarch/strlen-avx2.S: New file.
* sysdeps/x86_64/multiarch/strlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strlen.c: Likewise.
* sysdeps/x86_64/multiarch/strnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen.c: Likewise.
* sysdeps/x86_64/multiarch/wcslen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c (OPTIMIZE (avx2)): New.
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
SSE2 memchr is extended to support wmemchr. AVX2 memchr/rawmemchr/wmemchr
are added to search 32 bytes with a single vector compare instruction.
AVX2 memchr/rawmemchr/wmemchr are as fast as SSE2 memchr/rawmemchr/wmemchr
for small sizes and up to 1.5X faster for larger sizes on Haswell and
Skylake. Select AVX2 memchr/rawmemchr/wmemchr on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/memchr.S (MEMCHR): New. Depending on if
USE_AS_WMEMCHR is defined.
(PCMPEQ): Likewise.
(memchr): Renamed to ...
(MEMCHR): This. Support wmemchr if USE_AS_WMEMCHR is defined.
Replace pcmpeqb with PCMPEQ.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memchr-sse2, rawmemchr-sse2, memchr-avx2, rawmemchr-avx2,
wmemchr-sse4_1, wmemchr-avx2 and wmemchr-c.
* sysdeps/x86_64/multiarch/ifunc-avx2.h: New file.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr.c: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memchr_avx2, __memchr_sse2,
__rawmemchr_avx2, __rawmemchr_sse2, __wmemchr_avx2 and
__wmemchr_sse2.
Previously, the implementation would conditionally exit based on the
status argument, which GCC did not know about. This leads to
false uninitialized variable warnings when data is accessed after a
TEST_VERIFY_EXIT failure (from code which would never execute).
1 << 31 is undefined, so replace it with a cleaner check. Also remove
magic numbers in comments.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: Remove
mention of magic numbers in comments.
(_dl_procinfo): Fix undefined behavior
This patch corrects the conformtest expectations for sys/wait.h for
XPG4. This does not change the test results for this header at the
makefile level since it fixes some spurious failures for this header
while introducing other failures previously hidden by incorrect
expectations. However, it shows up issues with stdlib.h for XPG4
defining W* names that are not permitted in this case (previously
wrongly allowed; the W* reservation is UX-shaded in XPG4.2 /
XSI-shaded in POSIX before 2008); that test is thus XFAILed.
Tested for x86_64.
* conform/data/sys/wait.h-data (WIFCONTINUED): Do not expect for
[XPG4].
(WEXITED): Likewise.
(WSTOPPED): Likewise.
(WCONTINUED): Likewise.
(WNOHANG): Likewise.
(WNOWAIT): Likewise.
(idtype_t): Likewise.
(P_ALL): Likewise.
(P_PID): Likewise.
(P_PGID): Likewise.
(id_t): Likewise.
(siginfo_t): Likewise.
(wait3): Likewise.
(waitid): Likewise.
(signal.h): Do not allow header for [XPG4].
(sys/resource.h): Likewise.
(si_*): Do not allow for [XPG4].
(W*): Likewise.
(P_*): Likewise.
(BUS_): Likewise.
(CLD_): Likewise.
(FPE_): Likewise.
(ILL_): Likewise.
(POLL_): Likewise.
(SEGV_): Likewise.
(SI_): Likewise.
(TRAP_): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): New
variable.
There are 2 minimal strtoul implementations in ld.so:
1. __strtoul_internal in elf/dl-minimal.c.
2. tunables_strtoul in elf/dl-tunables.c.
This patch adds _dl_strtoul to replace them. Tested builds with and
without --enable-tunables.
[BZ #21528]
* elf/dl-minimal.c (__strtoul_internal): Removed.
(strtoul): Likewise.
* elf/dl-misc.c (_dl_strtoul): New function.
* elf/dl-tunables.c (tunables_strtoul): Removed.
(tunable_initialize): Replace tunables_strtoul with _dl_strtoul.
* elf/rtld.c (process_envvars): Likewise.
* sysdeps/unix/sysv/linux/dl-librecon.h (_dl_osversion_init):
Likewise.
* sysdeps/generic/ldsodefs.h (_dl_strtoul): New prototype.
wint_t is a little finicky because it might be defined by stddef.h, which
belongs to the compiler.
In addition to the _types_, a bunch of other declarations shared between
wctype.h and wchar.h are factored out to their own header.
* libio/bits/types/FILE.h, libio/bits/types/__FILE.h
* wcsmbs/bits/types/mbstate_t.h, wcsmbs/bits/types/__mbstate_t.h
* wcsmbs/bits/types/wint_t.h: New single-type definition files.
* wctype/bits/wctype-wchar.h: New file holding declarations shared
between wctype.h and wchar.h.
* libio/Makefile, wcsmbs/Makefile, wctype/Makefile:
Install them.
* include/bits/types/FILE.h, include/bits/types/__FILE.h
* include/bits/types/mbstate_t.h, include/bits/types/__mbstate_t.h
* include/bits/types/wint_t.h, include/bits/wcsmbs-wchar.h:
New wrappers.
* include/stdio.h, include/wchar.h, include/wctype.h:
No need to handle __need macros.
* grp/grp.h, gshadow/gshadow.h, hurd/hurd.h, iconv/gconv.h
* libio/stdio.h, mach/mach.h, misc/mntent.h, pwd/pwd.h
* shadow/shadow.h, stdio-common/printf.h, wcsmbs/uchar.h
* wcsmbs/wchar.h, wctype/wctype.h
* sysdeps/generic/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h
Use the new files instead of __need macros.
This patch adds tests for len == 0 and tests for positions close to the
beginning, which are equivalent to positions close to the end for memchr.
* string/test-memrchr.c (test_main): Add tests for len == 0
and tests for positions close to the beginning, which are
equivalent to positions close to the end for memchr.
Add strfromf128 to stdlib when _Float128 support is enabled.
* stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize
spec->info.is_binary128 to zero.
* stdio-common/printf.h (printf_info): Add new member is_binary128
to indicate that the number being converted to string is compatible
with the IEC 60559 binary128 format.
* stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with
_Float128 numbers.
* stdio-common/printf_fphex.c: Include ieee754_float128.h and
ldbl-128/printf_fphex_macros.h
(__printf_fphex): Add code to deal with _Float128 numbers.
* stdio-common/printf_size.c (__printf_size): Likewise.
* stdio-common/vfprintf.c (process_arg): Initialize member
info.is_binary128 to zero.
* stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro.
* stdlib/stdlib.h: Include bits/floatn.h for _Float128 support.
(strfromf128): New declaration.
* stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128
to one.
* sysdeps/ieee754/float128/Makefile: Add strfromf128.
* sysdeps/ieee754/float128/Versions: Likewise.
* sysdeps/ieee754/float128/strfromf128.c: New file.
This patch refactors the macro PRINT_FPHEX_LONG_DOUBLE from the file
sysdeps/ieee754/ldbl-128/printf_fphex.c into a function-like macro to
enable its use for both long double and _Float128, when they are
ABI-distinct.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Include
ldbl-128/printf_fphex_macros.h for the definition of PRINT_FPHEX.
(PRINT_FPHEX_LONG_DOUBLE): Define based on PRINT_FPHEX.
* sysdeps/ieee754/ldbl-128/printf_fphex_macros.h
(PRINT_FPHEX): New function-like macro that can be used for long
double, as well as for _Float128
In __printf_fp_l, __printf_fphex, and __printf_size the blocks of code that are
used to read a double or long double argument, check for special values and
convert to multiprecision are similar. When adding float128 support to libc,
more code would be duplicated to deal with the extra type. This patch moves
the repetitive code to a macro which is now used by double and long double and
will be used for float128 when support is added, thus avoiding more
duplication.
Tested for powerpc64le and s390x.
* stdio-common/printf_fp.c (PRINTF_FP_FETCH): New macro.
(__printf_fp_l): Use the new macro to avoid duplicating code.
* stdio-common/printf_fphex.c (PRINTF_FPHEX_FETCH): New macro.
(__printf_fphex): Use the new macro to avoid duplicating code.
* stdio-common/printf_size.c (PRINTF_SIZE_FETCH): New macro.
(__printf_size): Use the new macro to avoid duplicating code.
Reuse the code for __mpn_extract_long_double to implement
__mpn_extract_float128.
* include/gmp.h: Include bits/floatn.h
(__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1.
* stdlib/gmp-impl.h: Also check if alloca is not defined before
including stack-alloc.h. It could have been defined by other header
which not necessarily defines HAVE_ALLOCA.
* sysdeps/ieee754/float128/Makefile: New file.
* sysdeps/ieee754/float128/float1282mpn.c: New file.
* sysdeps/ieee754/float128/float128_private.h: Include gmp.h before
redefining __mpn_extract_long_double to __mpn_extract_float128, then
redefine __mpn_extract_long_double to __mpn_extract_float128.
* sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with
_Float128 to allow float128_private.h overrides.
Update the power of ten tables used by the common implementation when long
double is not the most expressive real type.
* stdlib/fpioconst.h: Include bits/floatn.h.
(FPIOCONST_HAVE_EXTENDED_RANGE): New macro for testing how big the
power of ten table should be.
(FPIOCONST_POW10_ARRAY_SIZE): Use larger table if above is true.
* stdlib/fpioconst.c (__tens): Use FPIOCONST_HAVE_EXTENDED_RANGE
to include larger tables when _Float128 support is enabled.
(_fpioconst_pow10): Likewise.
Various include/bits/types/*.h files do
where the path specified is relative to the toplevel glibc source
directory.
That has the wrong number of ../ components to achieve the desired
effect; it actually searches relative to include/ for a file that does
not exist there, then goes on to search the #include <> paths
specified with -I, eventually finding the desired file via such a path
(e.g. sysdeps/nptl/) with the right number of directory components.
Before that it searches include/../.. because of the -Iinclude,
meaning that an appropriately named file outside the glibc source tree
can affect the build.
This patch changes all those files to do #include <path> without the
../../, as some such files already do.
Tested for x86_64.
* include/bits/types/clock_t.h: Use #include <path> instead of
#include "../../path".
* include/bits/types/clockid_t.h: Likewise.
* include/bits/types/struct_iovec.h: Likewise.
* include/bits/types/struct_itimerspec.h: Likewise.
* include/bits/types/struct_osockaddr.h: Likewise.
* include/bits/types/struct_sigstack.h: Likewise.
* include/bits/types/struct_timespec.h: Likewise.
* include/bits/types/struct_timeval.h: Likewise.
* include/bits/types/struct_tm.h: Likewise.
* include/bits/types/time_t.h: Likewise.
* include/bits/types/timer_t.h: Likewise.
I observed a failure of timezone/tst-timezone with the same symptoms
as reported in bug 14096.
I was unable to reproduce the failure on testing again. However, from
inspection, the cause is as follows. tst-timezone uses time zones
compiled from the northamerica file, but has no dependency on any such
zones, so with a parallel build it is possible that they do not get
compiled until after tst-timezone is run. This patch adds a
dependency on the compiled America/New_York zone (the one used as a
makefile target to cause such zones to be compiled, rather than one
which is actually used in that test) to fix the race.
Tested for x86_64.
[BZ #14096]
* timezone/Makefile ($(objpfx)tst-timezone.out): Depend on
America/New_York.
Since ifunc-sse4_1.h is included only by wcsnlen.c, we can fold it
into wcsnlen.c. No code changes in wcsnlen.o.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: Removed and folded
into ...
* sysdeps/x86_64/multiarch/wcsnlen.c: Here. Don't include
ifunc-sse4_1.h.
`ptsname_r' is declared in stdlib.h to only accept a `nonnull'
second argument and therefore GCC may choose to make optimizations
based on the assumption that this argument is NULL. This means
that potentially, GCC can optimize away the NULL check at some
point in the future. Since this is a programming interface, we
might as well remove the NULL check ourselves.
This also warrants a change to the `ptsname_r' manual page that
must be submitted to the corresponding mailing list.
In addition, remove the NULL buffer test in login/tst-ptsname.c.
Add support for routines in dl-procinfo.h to show string versions of
HWCAP entries when a program is invoked with the LD_SHOW_AUXV
environment variable set and also to aid in path resolution for
ldconfig.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c
(_dl_aarch64_cap_flags): New array.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h
(_dl_hwcap_string, _dl_string_hwcap, _dl_procinfo): Implement
functions.
The LD_HWCAP_MASK environment variable was ignored in static binaries,
which is inconsistent with the behaviour of dynamically linked
binaries. This seems to have been because of the inability of
ld_hwcap_mask being read early enough to influence anything but now
that it is in tunables, the mask is usable in static binaries as well.
This feature is important for aarch64, which relies on HWCAP_CPUID
being masked out to disable multiarch. A sanity test on x86_64 shows
that there are no failures. Likewise for aarch64.
* elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Always set
up hwcap and hwcap_mask.
Now that LD_HWCAP_MASK (or glibc.tune.hwcap_mask) is read early enough
to influence cpu feature check in aarch64, use it to influence
multiarch selection. Setting LD_HWCAP_MASK such that it clears
HWCAP_CPUID will now disable multiarch for the binary.
HWCAP_CPUID is also now set in HWCAP_IMPORTANT so that it is set by
default. With this patch, this feature is only usable with
dyanmically linked binaries because LD_HWCAP_MASK is not read for
static binaries. A future patch fixes that.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Use glibc.tune.hwcap_mask.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: New file.
Drop _dl_hwcap_mask when building with tunables. This completes the
transition of hwcap_mask reading from _dl_hwcap_mask to tunables.
* elf/dl-hwcaps.h: New file.
* elf/dl-hwcaps.c: Include it.
(_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update
glibc.tune.hwcap_mask.
* elf/dl-cache.c: Include dl-hwcaps.h.
(_dl_load_cache_lookup)[HAVE_TUNABLES]: Read
glibc.tune.hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
* elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
(process_envvars)[HAVE_TUNABLES]: Likewise.
* sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Don't
initialize dl_hwcap_mask when tunables are enabled.
The dl-procinfo.h for linux/s390 and linux/i386 don't have include
guards, which causes them to fail since addition of LD_HWCAP_MASK to
tunables. Add _DL_I386_PROCINFO_H guard to avoid redefining
_dl_procinfo on multiple includes and also allow the subsequent
include of another dl-procinfo.h to work.
Verified with a build test on i686.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Add include
guard.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h: Likewise.
Add LD_HWCAP_MASK to tunables in preparation of it being removed from
rtld.c. This allows us to read LD_HWCAP_MASK much earlier so that it
can influence IFUNC resolution in aarch64.
This patch does not actually do anything other than read the
LD_HWCAP_MASK variable and add the tunables way to set the
LD_HWCAP_MASK, i.e. via the glibc.tune.hwcap_mask tunable. In a
follow-up patch, the _dl_hwcap_mask will be replaced with
glibc.tune.hwcap_mask to complete the transition.
* elf/dl-tunables.list: Add glibc.tune.hwcap_mask.
* scripts/gen-tunables.awk: Include dl-procinfo.h.
* manual/tunables.texi: Document glibc.tune.hwcap_mask.
The TUNABLE_SET_VALUE and family of macros (and my later attempt to
add a TUNABLE_GET) never quite went together very well because the
overall interface was not clearly defined. This patch is an attempt
to do just that.
This patch consolidates the API to two simple sets of macros,
TUNABLE_GET* and TUNABLE_SET*. If TUNABLE_NAMESPACE is defined,
TUNABLE_GET takes just the tunable name, type and a (optionally NULL)
callback function to get the value of the tunable. The callback
function, if non-NULL, is called if the tunable was externally set
(i.e. via GLIBC_TUNABLES or any future mechanism). For example:
val = TUNABLE_GET (check, int32_t, check_callback)
returns the value of the glibc.malloc.check tunable (assuming
TUNABLE_NAMESPACE is set to malloc) as an int32_t into VAL after
calling check_callback.
Likewise, TUNABLE_SET can be used to set the value of the tunable,
although this is currently possible only in the dynamic linker before
it relocates itself. For example:
TUNABLE_SET (check, int32_t, 2)
will set glibc.malloc.check to 2. Of course, this is not possible
since we set (or read) glibc.malloc.check long after it is relocated.
To access or set a tunable outside of TUNABLE_NAMESPACE, use the
TUNABLE_GET_FULL and TUNABLE_SET_FULL macros, which have the following
prototype:
TUNABLE_GET_FULL (glibc, tune, hwcap_mask, uint64_t, NULL)
TUNABLE_SET_FULL (glibc, tune, hwcap_mask, uint64_t, 0xffff)
In future the tunable list may get split into mutable and immutable
tunables where mutable tunables can be modified by the library and
userspace after relocation as well and TUNABLE_SET will be more useful
than it currently is. However whenever we actually do that split, we
will have to ensure that the mutable tunables are protected with
locks.
* elf/Versions (__tunable_set_val): Rename to __tunable_get_val.
* elf/dl-tunables.c: Likewise.
(do_tunable_update_val): New function.
(__tunable_set_val): New function.
(__tunable_get_val): Call CB only if the tunable was externally
initialized.
(tunables_strtoul): Replace strval with initialized.
* elf/dl-tunables.h (strval): Replace with a bool initialized.
(TUNABLE_ENUM_NAME, TUNABLE_ENUM_NAME1): Adjust names to
prevent collision.
(__tunable_set_val): New function.
(TUNABLE_GET, TUNABLE_GET_FULL): New macros.
(TUNABLE_SET, TUNABLE_SET_FULL): Likewise.
(TUNABLE_SET_VAL): Remove.
(TUNABLE_SET_VAL_WITH_CALLBACK): Likewise.
* README.tunables: Document the new macros.
* malloc/arena.c (ptmalloc_init): Adjust.
Since wcsnlen.S uses pminud which is the part of SSE4.1, move wcsnlen.S
to multiarch/wcsnlen-sse4_1.S.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
wcsnlen-sse4_1 and wcsnlen-c.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __wcsnlen_sse4_1 and
__wcsnlen_sse2.
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: New file.
* sysdeps/x86_64/multiarch/wcsnlen-c.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-sse4_1.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c: Likewise.
* sysdeps/x86_64/wcsnlen.S: Removed.
This patch removes the s390 specific implementation of spinlock code
and is now using the generic one.
ChangeLog:
* sysdeps/s390/nptl/pthread_spin_init.c: Delete File.
* sysdeps/s390/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
